diff options
Diffstat (limited to 'include/linux/platform_data')
20 files changed, 81 insertions, 93 deletions
diff --git a/include/linux/platform_data/ads7828.h b/include/linux/platform_data/ads7828.h index 3245f45f9d77..a3370a007702 100644 --- a/include/linux/platform_data/ads7828.h +++ b/include/linux/platform_data/ads7828.h @@ -4,7 +4,7 @@ * Copyright (c) 2012 Savoir-faire Linux Inc. * Vivien Didelot <vivien.didelot@savoirfairelinux.com> * - * For further information, see the Documentation/hwmon/ads7828 file. + * For further information, see the Documentation/hwmon/ads7828.rst file. * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as diff --git a/include/linux/platform_data/ds620.h b/include/linux/platform_data/ds620.h index 6ef58bb77e46..f0ce22a78bb8 100644 --- a/include/linux/platform_data/ds620.h +++ b/include/linux/platform_data/ds620.h @@ -14,7 +14,7 @@ struct ds620_platform_data { * 1 = PO_LOW * 2 = PO_HIGH * - * (see Documentation/hwmon/ds620) + * (see Documentation/hwmon/ds620.rst) */ int pomode; }; diff --git a/include/linux/platform_data/elm.h b/include/linux/platform_data/elm.h index b8686c00f15f..fef4b081b736 100644 --- a/include/linux/platform_data/elm.h +++ b/include/linux/platform_data/elm.h @@ -60,6 +60,6 @@ static inline int elm_config(struct device *dev, enum bch_ecc bch_type, { return -ENOSYS; } -#endif /* CONFIG_MTD_NAND_ECC_BCH */ +#endif /* CONFIG_MTD_NAND_OMAP_BCH */ #endif /* __ELM_H */ diff --git a/include/linux/platform_data/eth-ep93xx.h b/include/linux/platform_data/eth-ep93xx.h new file mode 100644 index 000000000000..8eef637a804d --- /dev/null +++ b/include/linux/platform_data/eth-ep93xx.h @@ -0,0 +1,10 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +#ifndef _LINUX_PLATFORM_DATA_ETH_EP93XX +#define _LINUX_PLATFORM_DATA_ETH_EP93XX + +struct ep93xx_eth_data { + unsigned char dev_addr[6]; + unsigned char phy_id; +}; + +#endif diff --git a/include/linux/platform_data/gpio-omap.h b/include/linux/platform_data/gpio-omap.h index 6d07eebb3f75..7c36370c062e 100644 --- a/include/linux/platform_data/gpio-omap.h +++ b/include/linux/platform_data/gpio-omap.h @@ -200,8 +200,6 @@ struct omap_gpio_platform_data { bool is_mpuio; /* whether the bank is of type MPUIO */ u32 non_wakeup_gpios; - u32 quirks; /* Version specific quirks mask */ - struct omap_gpio_reg_offs *regs; /* Return context loss count due to PM states changing */ diff --git a/include/linux/platform_data/ina2xx.h b/include/linux/platform_data/ina2xx.h index 9f0aa1b48c78..dde59fd3590f 100644 --- a/include/linux/platform_data/ina2xx.h +++ b/include/linux/platform_data/ina2xx.h @@ -7,7 +7,7 @@ * it under the terms of the GNU General Public License version 2 as * published by the Free Software Foundation. * - * For further information, see the Documentation/hwmon/ina2xx file. + * For further information, see the Documentation/hwmon/ina2xx.rst file. */ /** diff --git a/include/linux/platform_data/keypad-ep93xx.h b/include/linux/platform_data/keypad-ep93xx.h index 0e36818e3680..3054fced8509 100644 --- a/include/linux/platform_data/keypad-ep93xx.h +++ b/include/linux/platform_data/keypad-ep93xx.h @@ -9,8 +9,7 @@ struct matrix_keymap_data; #define EP93XX_KEYPAD_DIAG_MODE (1<<1) /* diagnostic mode */ #define EP93XX_KEYPAD_BACK_DRIVE (1<<2) /* back driving mode */ #define EP93XX_KEYPAD_TEST_MODE (1<<3) /* scan only column 0 */ -#define EP93XX_KEYPAD_KDIV (1<<4) /* 1/4 clock or 1/16 clock */ -#define EP93XX_KEYPAD_AUTOREPEAT (1<<5) /* enable key autorepeat */ +#define EP93XX_KEYPAD_AUTOREPEAT (1<<4) /* enable key autorepeat */ /** * struct ep93xx_keypad_platform_data - platform specific device structure @@ -24,6 +23,7 @@ struct ep93xx_keypad_platform_data { unsigned int debounce; unsigned int prescale; unsigned int flags; + unsigned int clk_rate; }; #define EP93XX_MATRIX_ROWS (8) diff --git a/include/linux/platform_data/lm3630a_bl.h b/include/linux/platform_data/lm3630a_bl.h index 7538e38e270b..762e68956f31 100644 --- a/include/linux/platform_data/lm3630a_bl.h +++ b/include/linux/platform_data/lm3630a_bl.h @@ -38,9 +38,11 @@ enum lm3630a_ledb_ctrl { #define LM3630A_MAX_BRIGHTNESS 255 /* + *@leda_label : optional led a label. *@leda_init_brt : led a init brightness. 4~255 *@leda_max_brt : led a max brightness. 4~255 *@leda_ctrl : led a disable, enable linear, enable exponential + *@ledb_label : optional led b label. *@ledb_init_brt : led b init brightness. 4~255 *@ledb_max_brt : led b max brightness. 4~255 *@ledb_ctrl : led b disable, enable linear, enable exponential @@ -50,10 +52,12 @@ enum lm3630a_ledb_ctrl { struct lm3630a_platform_data { /* led a config. */ + const char *leda_label; int leda_init_brt; int leda_max_brt; enum lm3630a_leda_ctrl leda_ctrl; /* led b config. */ + const char *ledb_label; int ledb_init_brt; int ledb_max_brt; enum lm3630a_ledb_ctrl ledb_ctrl; diff --git a/include/linux/platform_data/macb.h b/include/linux/platform_data/macb.h index 7815d50c26ff..2bc51b822956 100644 --- a/include/linux/platform_data/macb.h +++ b/include/linux/platform_data/macb.h @@ -12,19 +12,10 @@ /** * struct macb_platform_data - platform data for MACB Ethernet - * @phy_mask: phy mask passed when register the MDIO bus - * within the driver - * @phy_irq_pin: PHY IRQ - * @is_rmii: using RMII interface? - * @rev_eth_addr: reverse Ethernet address byte order * @pclk: platform clock * @hclk: AHB clock */ struct macb_platform_data { - u32 phy_mask; - int phy_irq_pin; - u8 is_rmii; - u8 rev_eth_addr; struct clk *pclk; struct clk *hclk; }; diff --git a/include/linux/platform_data/max197.h b/include/linux/platform_data/max197.h index 8da8f94ee15c..2bbd0919bc89 100644 --- a/include/linux/platform_data/max197.h +++ b/include/linux/platform_data/max197.h @@ -8,7 +8,7 @@ * it under the terms of the GNU General Public License version 2 as * published by the Free Software Foundation. * - * For further information, see the Documentation/hwmon/max197 file. + * For further information, see the Documentation/hwmon/max197.rst file. */ #ifndef _PDATA_MAX197_H diff --git a/include/linux/platform_data/mv88e6xxx.h b/include/linux/platform_data/mv88e6xxx.h index 963730b44aea..21452a9365e1 100644 --- a/include/linux/platform_data/mv88e6xxx.h +++ b/include/linux/platform_data/mv88e6xxx.h @@ -13,6 +13,7 @@ struct dsa_mv88e6xxx_pdata { unsigned int enabled_ports; struct net_device *netdev; u32 eeprom_len; + int irq; }; #endif diff --git a/include/linux/platform_data/ntc_thermistor.h b/include/linux/platform_data/ntc_thermistor.h index ee03d429742b..5fa115d3ea4b 100644 --- a/include/linux/platform_data/ntc_thermistor.h +++ b/include/linux/platform_data/ntc_thermistor.h @@ -42,7 +42,7 @@ struct ntc_thermistor_platform_data { * read_uV() * * How to setup pullup_ohm, pulldown_ohm, and connect is - * described at Documentation/hwmon/ntc_thermistor + * described at Documentation/hwmon/ntc_thermistor.rst * * pullup/down_ohm: 0 for infinite / not-connected * diff --git a/include/linux/platform_data/pca954x.h b/include/linux/platform_data/pca954x.h deleted file mode 100644 index 1712677d5904..000000000000 --- a/include/linux/platform_data/pca954x.h +++ /dev/null @@ -1,48 +0,0 @@ -/* - * - * pca954x.h - I2C multiplexer/switch support - * - * Copyright (c) 2008-2009 Rodolfo Giometti <giometti@linux.it> - * Copyright (c) 2008-2009 Eurotech S.p.A. <info@eurotech.it> - * Michael Lawnick <michael.lawnick.ext@nsn.com> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. - */ - - -#ifndef _LINUX_I2C_PCA954X_H -#define _LINUX_I2C_PCA954X_H - -/* Platform data for the PCA954x I2C multiplexers */ - -/* Per channel initialisation data: - * @adap_id: bus number for the adapter. 0 = don't care - * @deselect_on_exit: set this entry to 1, if your H/W needs deselection - * of this channel after transaction. - * - */ -struct pca954x_platform_mode { - int adap_id; - unsigned int deselect_on_exit:1; - unsigned int class; -}; - -/* Per mux/switch data, used with i2c_register_board_info */ -struct pca954x_platform_data { - struct pca954x_platform_mode *modes; - int num_modes; -}; - -#endif /* _LINUX_I2C_PCA954X_H */ diff --git a/include/linux/platform_data/pm33xx.h b/include/linux/platform_data/pm33xx.h index fbf5ed73c7cc..dd5971937a64 100644 --- a/include/linux/platform_data/pm33xx.h +++ b/include/linux/platform_data/pm33xx.h @@ -51,6 +51,11 @@ struct am33xx_pm_platform_data { unsigned long args); struct am33xx_pm_sram_addr *(*get_sram_addrs)(void); void __iomem *(*get_rtc_base_addr)(void); + void (*save_context)(void); + void (*restore_context)(void); + void (*prepare_rtc_suspend)(void); + void (*prepare_rtc_resume)(void); + int (*check_off_mode_enable)(void); }; struct am33xx_pm_sram_data { diff --git a/include/linux/platform_data/spi-ep93xx.h b/include/linux/platform_data/spi-ep93xx.h index eb16c6739ac2..b439f2a896e0 100644 --- a/include/linux/platform_data/spi-ep93xx.h +++ b/include/linux/platform_data/spi-ep93xx.h @@ -6,13 +6,9 @@ struct spi_device; /** * struct ep93xx_spi_info - EP93xx specific SPI descriptor - * @chipselect: array of gpio numbers to use as chip selects - * @num_chipselect: ARRAY_SIZE(chipselect) * @use_dma: use DMA for the transfers */ struct ep93xx_spi_info { - int *chipselect; - int num_chipselect; bool use_dma; }; diff --git a/include/linux/platform_data/ti-sysc.h b/include/linux/platform_data/ti-sysc.h index 1ea3aab972b4..9256c0305968 100644 --- a/include/linux/platform_data/ti-sysc.h +++ b/include/linux/platform_data/ti-sysc.h @@ -46,8 +46,13 @@ struct sysc_regbits { s8 emufree_shift; }; -#define SYSC_QUIRK_LEGACY_IDLE BIT(8) -#define SYSC_QUIRK_RESET_STATUS BIT(7) +#define SYSC_QUIRK_SWSUP_MSTANDBY BIT(13) +#define SYSC_QUIRK_SWSUP_SIDLE_ACT BIT(12) +#define SYSC_QUIRK_SWSUP_SIDLE BIT(11) +#define SYSC_QUIRK_EXT_OPT_CLOCK BIT(10) +#define SYSC_QUIRK_LEGACY_IDLE BIT(9) +#define SYSC_QUIRK_RESET_STATUS BIT(8) +#define SYSC_QUIRK_NO_IDLE BIT(7) #define SYSC_QUIRK_NO_IDLE_ON_INIT BIT(6) #define SYSC_QUIRK_NO_RESET_ON_INIT BIT(5) #define SYSC_QUIRK_OPT_CLKS_NEEDED BIT(4) diff --git a/include/linux/platform_data/timer-ixp4xx.h b/include/linux/platform_data/timer-ixp4xx.h new file mode 100644 index 000000000000..ee92ae7edaed --- /dev/null +++ b/include/linux/platform_data/timer-ixp4xx.h @@ -0,0 +1,11 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +#ifndef __TIMER_IXP4XX_H +#define __TIMER_IXP4XX_H + +#include <linux/ioport.h> + +void __init ixp4xx_timer_setup(resource_size_t timerbase, + int timer_irq, + unsigned int timer_freq); + +#endif diff --git a/include/linux/platform_data/wilco-ec.h b/include/linux/platform_data/wilco-ec.h index 446473a46b88..1ff224793c99 100644 --- a/include/linux/platform_data/wilco-ec.h +++ b/include/linux/platform_data/wilco-ec.h @@ -14,10 +14,6 @@ /* Message flags for using the mailbox() interface */ #define WILCO_EC_FLAG_NO_RESPONSE BIT(0) /* EC does not respond */ #define WILCO_EC_FLAG_EXTENDED_DATA BIT(1) /* EC returns 256 data bytes */ -#define WILCO_EC_FLAG_RAW_REQUEST BIT(2) /* Do not trim request data */ -#define WILCO_EC_FLAG_RAW_RESPONSE BIT(3) /* Do not trim response data */ -#define WILCO_EC_FLAG_RAW (WILCO_EC_FLAG_RAW_REQUEST | \ - WILCO_EC_FLAG_RAW_RESPONSE) /* Normal commands have a maximum 32 bytes of data */ #define EC_MAILBOX_DATA_SIZE 32 @@ -56,10 +52,7 @@ struct wilco_ec_device { * @mailbox_id: Mailbox identifier, specifies the command set. * @mailbox_version: Mailbox interface version %EC_MAILBOX_VERSION * @reserved: Set to zero. - * @data_size: Length of request, data + last 2 bytes of the header. - * @command: Mailbox command code, unique for each mailbox_id set. - * @reserved_raw: Set to zero for most commands, but is used by - * some command types and for raw commands. + * @data_size: Length of following data. */ struct wilco_ec_request { u8 struct_version; @@ -68,8 +61,6 @@ struct wilco_ec_request { u8 mailbox_version; u8 reserved; u16 data_size; - u8 command; - u8 reserved_raw; } __packed; /** @@ -79,8 +70,6 @@ struct wilco_ec_request { * @result: Result code from the EC. Non-zero indicates an error. * @data_size: Length of the response data buffer. * @reserved: Set to zero. - * @mbox0: EC returned data at offset 0 is unused (always 0) so this byte - * is treated as part of the header instead of the data. * @data: Response data buffer. Max size is %EC_MAILBOX_DATA_SIZE_EXTENDED. */ struct wilco_ec_response { @@ -89,7 +78,6 @@ struct wilco_ec_response { u16 result; u16 data_size; u8 reserved[2]; - u8 mbox0; u8 data[0]; } __packed; @@ -111,21 +99,15 @@ enum wilco_ec_msg_type { * struct wilco_ec_message - Request and response message. * @type: Mailbox message type. * @flags: Message flags, e.g. %WILCO_EC_FLAG_NO_RESPONSE. - * @command: Mailbox command code. - * @result: Result code from the EC. Non-zero indicates an error. * @request_size: Number of bytes to send to the EC. * @request_data: Buffer containing the request data. - * @response_size: Number of bytes expected from the EC. - * This is 32 by default and 256 if the flag - * is set for %WILCO_EC_FLAG_EXTENDED_DATA + * @response_size: Number of bytes to read from EC. * @response_data: Buffer containing the response data, should be * response_size bytes and allocated by caller. */ struct wilco_ec_message { enum wilco_ec_msg_type type; u8 flags; - u8 command; - u8 result; size_t request_size; void *request_data; size_t response_size; diff --git a/include/linux/platform_data/x86/asus-wmi.h b/include/linux/platform_data/x86/asus-wmi.h index 53dfc2541960..bfba245636a7 100644 --- a/include/linux/platform_data/x86/asus-wmi.h +++ b/include/linux/platform_data/x86/asus-wmi.h @@ -67,6 +67,7 @@ /* Input */ #define ASUS_WMI_DEVID_TOUCHPAD 0x00100011 #define ASUS_WMI_DEVID_TOUCHPAD_LED 0x00100012 +#define ASUS_WMI_DEVID_FNLOCK 0x00100023 /* Fan, Thermal */ #define ASUS_WMI_DEVID_THERMAL_CTRL 0x00110011 diff --git a/include/linux/platform_data/xilinx-ll-temac.h b/include/linux/platform_data/xilinx-ll-temac.h new file mode 100644 index 000000000000..368530f98176 --- /dev/null +++ b/include/linux/platform_data/xilinx-ll-temac.h @@ -0,0 +1,32 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +#ifndef __LINUX_XILINX_LL_TEMAC_H +#define __LINUX_XILINX_LL_TEMAC_H + +#include <linux/if_ether.h> +#include <linux/phy.h> + +struct ll_temac_platform_data { + bool txcsum; /* Enable/disable TX checksum */ + bool rxcsum; /* Enable/disable RX checksum */ + u8 mac_addr[ETH_ALEN]; /* MAC address (6 bytes) */ + /* Clock frequency for input to MDIO clock generator */ + u32 mdio_clk_freq; + unsigned long long mdio_bus_id; /* Unique id for MDIO bus */ + int phy_addr; /* Address of the PHY to connect to */ + phy_interface_t phy_interface; /* PHY interface mode */ + bool reg_little_endian; /* Little endian TEMAC register access */ + bool dma_little_endian; /* Little endian DMA register access */ + /* Pre-initialized mutex to use for synchronizing indirect + * register access. When using both interfaces of a single + * TEMAC IP block, the same mutex should be passed here, as + * they share the same DCR bus bridge. + */ + struct mutex *indirect_mutex; + /* DMA channel control setup */ + u8 tx_irq_timeout; /* TX Interrupt Delay Time-out */ + u8 tx_irq_count; /* TX Interrupt Coalescing Threshold Count */ + u8 rx_irq_timeout; /* RX Interrupt Delay Time-out */ + u8 rx_irq_count; /* RX Interrupt Coalescing Threshold Count */ +}; + +#endif /* __LINUX_XILINX_LL_TEMAC_H */ |