6 files changed, 69 insertions, 49 deletions
diff --git a/include/linux/platform_data/hwmon-s3c.h b/include/linux/platform_data/hwmon-s3c.h
index c167e4429bc7..0e3cce130fe2 100644
--- a/include/linux/platform_data/hwmon-s3c.h
+++ b/include/linux/platform_data/hwmon-s3c.h
@@ -1,5 +1,4 @@
-/* linux/arch/arm/plat-s3c/include/plat/hwmon.h
- *
+/*
  * Copyright 2005 Simtec Electronics
  *	Ben Dooks <ben@simtec.co.uk>
  *	http://armlinux.simtec.co.uk/
@@ -11,8 +10,8 @@
  * published by the Free Software Foundation.
 */
 
-#ifndef __ASM_ARCH_ADC_HWMON_H
-#define __ASM_ARCH_ADC_HWMON_H __FILE__
+#ifndef __HWMON_S3C_H__
+#define __HWMON_S3C_H__
 
 /**
  * s3c_hwmon_chcfg - channel configuration
@@ -47,5 +46,4 @@ struct s3c_hwmon_pdata {
  */
 extern void __init s3c_hwmon_set_platdata(struct s3c_hwmon_pdata *pd);
 
-#endif /* __ASM_ARCH_ADC_HWMON_H */
-
+#endif /* __HWMON_S3C_H__ */
diff --git a/include/linux/platform_data/i2c-nomadik.h b/include/linux/platform_data/i2c-nomadik.h
deleted file mode 100644
index 3a8be9cdc95c..000000000000
--- a/include/linux/platform_data/i2c-nomadik.h
+++ /dev/null
@@ -1,39 +0,0 @@
-/*
- * Copyright (C) 2009 ST-Ericsson
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2, as
- * published by the Free Software Foundation.
- */
-#ifndef __PDATA_I2C_NOMADIK_H
-#define __PDATA_I2C_NOMADIK_H
-
-enum i2c_freq_mode {
-	I2C_FREQ_MODE_STANDARD,		/* up to 100 Kb/s */
-	I2C_FREQ_MODE_FAST,		/* up to 400 Kb/s */
-	I2C_FREQ_MODE_HIGH_SPEED,	/* up to 3.4 Mb/s */
-	I2C_FREQ_MODE_FAST_PLUS,	/* up to 1 Mb/s */
-};
-
-/**
- * struct nmk_i2c_controller - client specific controller configuration
- * @clk_freq:	clock frequency for the operation mode
- * @slsu:	Slave data setup time in ns.
- *		The needed setup time for three modes of operation
- *		are 250ns, 100ns and 10ns respectively thus leading
- *		to the values of 14, 6, 2 for a 48 MHz i2c clk
- * @tft:	Tx FIFO Threshold in bytes
- * @rft:	Rx FIFO Threshold in bytes
- * @timeout	Slave response timeout(ms)
- * @sm:		speed mode
- */
-struct nmk_i2c_controller {
-	u32             clk_freq;
-	unsigned short	slsu;
-	unsigned char	tft;
-	unsigned char	rft;
-	int timeout;
-	enum i2c_freq_mode	sm;
-};
-
-#endif	/* __PDATA_I2C_NOMADIK_H */
diff --git a/include/linux/platform_data/max197.h b/include/linux/platform_data/max197.h
index e2a41dd7690c..8da8f94ee15c 100644
--- a/include/linux/platform_data/max197.h
+++ b/include/linux/platform_data/max197.h
@@ -11,6 +11,9 @@
  * For further information, see the Documentation/hwmon/max197 file.
  */
 
+#ifndef _PDATA_MAX197_H
+#define _PDATA_MAX197_H
+
 /**
  * struct max197_platform_data - MAX197 connectivity info
  * @convert:	Function used to start a conversion with control byte ctrl.
@@ -19,3 +22,5 @@
 struct max197_platform_data {
 	int (*convert)(u8 ctrl);
 };
+
+#endif /* _PDATA_MAX197_H */
diff --git a/include/linux/platform_data/sht15.h b/include/linux/platform_data/sht15.h
index 33e0fd27225e..12289c1e9413 100644
--- a/include/linux/platform_data/sht15.h
+++ b/include/linux/platform_data/sht15.h
@@ -12,6 +12,9 @@
  * For further information, see the Documentation/hwmon/sht15 file.
  */
 
+#ifndef _PDATA_SHT15_H
+#define _PDATA_SHT15_H
+
 /**
  * struct sht15_platform_data - sht15 connectivity info
  * @gpio_data:		no. of gpio to which bidirectional data line is
@@ -31,3 +34,5 @@ struct sht15_platform_data {
 	bool no_otp_reload;
 	bool low_resolution;
 };
+
+#endif /* _PDATA_SHT15_H */
diff --git a/include/linux/platform_data/usb-ehci-orion.h b/include/linux/platform_data/usb-ehci-orion.h
index 6fc78e430420..52b0acb35fd7 100644
--- a/include/linux/platform_data/usb-ehci-orion.h
+++ b/include/linux/platform_data/usb-ehci-orion.h
@@ -1,13 +1,11 @@
 /*
- * arch/arm/plat-orion/include/plat/ehci-orion.h
- *
  * This file is licensed under the terms of the GNU General Public
  * License version 2.  This program is licensed "as is" without any
  * warranty of any kind, whether express or implied.
  */
 
-#ifndef __PLAT_EHCI_ORION_H
-#define __PLAT_EHCI_ORION_H
+#ifndef __USB_EHCI_ORION_H
+#define __USB_EHCI_ORION_H
 
 #include <linux/mbus.h>
 
diff --git a/include/linux/platform_data/usb-omap1.h b/include/linux/platform_data/usb-omap1.h
new file mode 100644
index 000000000000..43b5ce139c37
--- /dev/null
+++ b/include/linux/platform_data/usb-omap1.h
@@ -0,0 +1,53 @@
+/*
+ * Platform data for OMAP1 USB
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive for
+ * more details.
+ */
+#ifndef __LINUX_USB_OMAP1_H
+#define __LINUX_USB_OMAP1_H
+
+#include <linux/platform_device.h>
+
+struct omap_usb_config {
+	/* Configure drivers according to the connectors on your board:
+	 *  - "A" connector (rectagular)
+	 *	... for host/OHCI use, set "register_host".
+	 *  - "B" connector (squarish) or "Mini-B"
+	 *	... for device/gadget use, set "register_dev".
+	 *  - "Mini-AB" connector (very similar to Mini-B)
+	 *	... for OTG use as device OR host, initialize "otg"
+	 */
+	unsigned	register_host:1;
+	unsigned	register_dev:1;
+	u8		otg;	/* port number, 1-based:  usb1 == 2 */
+
+	const char	*extcon;	/* extcon device for OTG */
+
+	u8		hmc_mode;
+
+	/* implicitly true if otg:  host supports remote wakeup? */
+	u8		rwc;
+
+	/* signaling pins used to talk to transceiver on usbN:
+	 *  0 == usbN unused
+	 *  2 == usb0-only, using internal transceiver
+	 *  3 == 3 wire bidirectional
+	 *  4 == 4 wire bidirectional
+	 *  6 == 6 wire unidirectional (or TLL)
+	 */
+	u8		pins[3];
+
+	struct platform_device *udc_device;
+	struct platform_device *ohci_device;
+	struct platform_device *otg_device;
+
+	u32 (*usb0_init)(unsigned nwires, unsigned is_device);
+	u32 (*usb1_init)(unsigned nwires);
+	u32 (*usb2_init)(unsigned nwires, unsigned alt_pingroup);
+
+	int (*ocpi_enable)(void);
+};
+
+#endif /* __LINUX_USB_OMAP1_H */