diff options
Diffstat (limited to 'include/linux/regmap.h')
| -rw-r--r-- | include/linux/regmap.h | 41 |
1 files changed, 35 insertions, 6 deletions
diff --git a/include/linux/regmap.h b/include/linux/regmap.h index a367d59c301d..1781b6cb793c 100644 --- a/include/linux/regmap.h +++ b/include/linux/regmap.h @@ -1089,27 +1089,48 @@ int regmap_fields_read(struct regmap_field *field, unsigned int id, int regmap_fields_update_bits_base(struct regmap_field *field, unsigned int id, unsigned int mask, unsigned int val, bool *change, bool async, bool force); +/** + * struct regmap_irq_type - IRQ type definitions. + * + * @type_reg_offset: Offset register for the irq type setting. + * @type_rising_val: Register value to configure RISING type irq. + * @type_falling_val: Register value to configure FALLING type irq. + * @type_level_low_val: Register value to configure LEVEL_LOW type irq. + * @type_level_high_val: Register value to configure LEVEL_HIGH type irq. + * @types_supported: logical OR of IRQ_TYPE_* flags indicating supported types. + */ +struct regmap_irq_type { + unsigned int type_reg_offset; + unsigned int type_reg_mask; + unsigned int type_rising_val; + unsigned int type_falling_val; + unsigned int type_level_low_val; + unsigned int type_level_high_val; + unsigned int types_supported; +}; /** * struct regmap_irq - Description of an IRQ for the generic regmap irq_chip. * * @reg_offset: Offset of the status/mask register within the bank * @mask: Mask used to flag/control the register. - * @type_reg_offset: Offset register for the irq type setting. - * @type_rising_mask: Mask bit to configure RISING type irq. - * @type_falling_mask: Mask bit to configure FALLING type irq. + * @type: IRQ trigger type setting details if supported. */ struct regmap_irq { unsigned int reg_offset; unsigned int mask; - unsigned int type_reg_offset; - unsigned int type_rising_mask; - unsigned int type_falling_mask; + struct regmap_irq_type type; }; #define REGMAP_IRQ_REG(_irq, _off, _mask) \ [_irq] = { .reg_offset = (_off), .mask = (_mask) } +#define REGMAP_IRQ_REG_LINE(_id, _reg_bits) \ + [_id] = { \ + .mask = BIT((_id) % (_reg_bits)), \ + .reg_offset = (_id) / (_reg_bits), \ + } + /** * struct regmap_irq_chip - Description of a generic regmap irq_chip. * @@ -1131,6 +1152,12 @@ struct regmap_irq { * @ack_invert: Inverted ack register: cleared bits for ack. * @wake_invert: Inverted wake register: cleared bits are wake enabled. * @type_invert: Invert the type flags. + * @type_in_mask: Use the mask registers for controlling irq type. For + * interrupts defining type_rising/falling_mask use mask_base + * for edge configuration and never update bits in type_base. + * @clear_on_unmask: For chips with interrupts cleared on read: read the status + * registers before unmasking interrupts to clear any bits + * set when they were masked. * @runtime_pm: Hold a runtime PM lock on the device when accessing it. * * @num_regs: Number of registers in each control bank. @@ -1169,6 +1196,8 @@ struct regmap_irq_chip { bool wake_invert:1; bool runtime_pm:1; bool type_invert:1; + bool type_in_mask:1; + bool clear_on_unmask:1; int num_regs; |