aboutsummaryrefslogtreecommitdiffstats
path: root/include/linux/soundwire/sdw.h
diff options
context:
space:
mode:
Diffstat (limited to 'include/linux/soundwire/sdw.h')
-rw-r--r--include/linux/soundwire/sdw.h479
1 files changed, 479 insertions, 0 deletions
diff --git a/include/linux/soundwire/sdw.h b/include/linux/soundwire/sdw.h
new file mode 100644
index 000000000000..e91fdcf41049
--- /dev/null
+++ b/include/linux/soundwire/sdw.h
@@ -0,0 +1,479 @@
+// SPDX-License-Identifier: (GPL-2.0 OR BSD-3-Clause)
+// Copyright(c) 2015-17 Intel Corporation.
+
+#ifndef __SOUNDWIRE_H
+#define __SOUNDWIRE_H
+
+struct sdw_bus;
+struct sdw_slave;
+
+/* SDW spec defines and enums, as defined by MIPI 1.1. Spec */
+
+/* SDW Broadcast Device Number */
+#define SDW_BROADCAST_DEV_NUM 15
+
+/* SDW Enumeration Device Number */
+#define SDW_ENUM_DEV_NUM 0
+
+/* SDW Group Device Numbers */
+#define SDW_GROUP12_DEV_NUM 12
+#define SDW_GROUP13_DEV_NUM 13
+
+/* SDW Master Device Number, not supported yet */
+#define SDW_MASTER_DEV_NUM 14
+
+#define SDW_NUM_DEV_ID_REGISTERS 6
+
+#define SDW_MAX_DEVICES 11
+
+/**
+ * enum sdw_slave_status - Slave status
+ * @SDW_SLAVE_UNATTACHED: Slave is not attached with the bus.
+ * @SDW_SLAVE_ATTACHED: Slave is attached with bus.
+ * @SDW_SLAVE_ALERT: Some alert condition on the Slave
+ * @SDW_SLAVE_RESERVED: Reserved for future use
+ */
+enum sdw_slave_status {
+ SDW_SLAVE_UNATTACHED = 0,
+ SDW_SLAVE_ATTACHED = 1,
+ SDW_SLAVE_ALERT = 2,
+ SDW_SLAVE_RESERVED = 3,
+};
+
+/**
+ * enum sdw_command_response - Command response as defined by SDW spec
+ * @SDW_CMD_OK: cmd was successful
+ * @SDW_CMD_IGNORED: cmd was ignored
+ * @SDW_CMD_FAIL: cmd was NACKed
+ * @SDW_CMD_TIMEOUT: cmd timedout
+ * @SDW_CMD_FAIL_OTHER: cmd failed due to other reason than above
+ *
+ * NOTE: The enum is different than actual Spec as response in the Spec is
+ * combination of ACK/NAK bits
+ *
+ * SDW_CMD_TIMEOUT/FAIL_OTHER is defined for SW use, not in spec
+ */
+enum sdw_command_response {
+ SDW_CMD_OK = 0,
+ SDW_CMD_IGNORED = 1,
+ SDW_CMD_FAIL = 2,
+ SDW_CMD_TIMEOUT = 3,
+ SDW_CMD_FAIL_OTHER = 4,
+};
+
+/*
+ * SDW properties, defined in MIPI DisCo spec v1.0
+ */
+enum sdw_clk_stop_reset_behave {
+ SDW_CLK_STOP_KEEP_STATUS = 1,
+};
+
+/**
+ * enum sdw_p15_behave - Slave Port 15 behaviour when the Master attempts a
+ * read
+ * @SDW_P15_READ_IGNORED: Read is ignored
+ * @SDW_P15_CMD_OK: Command is ok
+ */
+enum sdw_p15_behave {
+ SDW_P15_READ_IGNORED = 0,
+ SDW_P15_CMD_OK = 1,
+};
+
+/**
+ * enum sdw_dpn_type - Data port types
+ * @SDW_DPN_FULL: Full Data Port is supported
+ * @SDW_DPN_SIMPLE: Simplified Data Port as defined in spec.
+ * DPN_SampleCtrl2, DPN_OffsetCtrl2, DPN_HCtrl and DPN_BlockCtrl3
+ * are not implemented.
+ * @SDW_DPN_REDUCED: Reduced Data Port as defined in spec.
+ * DPN_SampleCtrl2, DPN_HCtrl are not implemented.
+ */
+enum sdw_dpn_type {
+ SDW_DPN_FULL = 0,
+ SDW_DPN_SIMPLE = 1,
+ SDW_DPN_REDUCED = 2,
+};
+
+/**
+ * enum sdw_clk_stop_mode - Clock Stop modes
+ * @SDW_CLK_STOP_MODE0: Slave can continue operation seamlessly on clock
+ * restart
+ * @SDW_CLK_STOP_MODE1: Slave may have entered a deeper power-saving mode,
+ * not capable of continuing operation seamlessly when the clock restarts
+ */
+enum sdw_clk_stop_mode {
+ SDW_CLK_STOP_MODE0 = 0,
+ SDW_CLK_STOP_MODE1 = 1,
+};
+
+/**
+ * struct sdw_dp0_prop - DP0 properties
+ * @max_word: Maximum number of bits in a Payload Channel Sample, 1 to 64
+ * (inclusive)
+ * @min_word: Minimum number of bits in a Payload Channel Sample, 1 to 64
+ * (inclusive)
+ * @num_words: number of wordlengths supported
+ * @words: wordlengths supported
+ * @flow_controlled: Slave implementation results in an OK_NotReady
+ * response
+ * @simple_ch_prep_sm: If channel prepare sequence is required
+ * @device_interrupts: If implementation-defined interrupts are supported
+ *
+ * The wordlengths are specified by Spec as max, min AND number of
+ * discrete values, implementation can define based on the wordlengths they
+ * support
+ */
+struct sdw_dp0_prop {
+ u32 max_word;
+ u32 min_word;
+ u32 num_words;
+ u32 *words;
+ bool flow_controlled;
+ bool simple_ch_prep_sm;
+ bool device_interrupts;
+};
+
+/**
+ * struct sdw_dpn_audio_mode - Audio mode properties for DPn
+ * @bus_min_freq: Minimum bus frequency, in Hz
+ * @bus_max_freq: Maximum bus frequency, in Hz
+ * @bus_num_freq: Number of discrete frequencies supported
+ * @bus_freq: Discrete bus frequencies, in Hz
+ * @min_freq: Minimum sampling frequency, in Hz
+ * @max_freq: Maximum sampling bus frequency, in Hz
+ * @num_freq: Number of discrete sampling frequency supported
+ * @freq: Discrete sampling frequencies, in Hz
+ * @prep_ch_behave: Specifies the dependencies between Channel Prepare
+ * sequence and bus clock configuration
+ * If 0, Channel Prepare can happen at any Bus clock rate
+ * If 1, Channel Prepare sequence shall happen only after Bus clock is
+ * changed to a frequency supported by this mode or compatible modes
+ * described by the next field
+ * @glitchless: Bitmap describing possible glitchless transitions from this
+ * Audio Mode to other Audio Modes
+ */
+struct sdw_dpn_audio_mode {
+ u32 bus_min_freq;
+ u32 bus_max_freq;
+ u32 bus_num_freq;
+ u32 *bus_freq;
+ u32 max_freq;
+ u32 min_freq;
+ u32 num_freq;
+ u32 *freq;
+ u32 prep_ch_behave;
+ u32 glitchless;
+};
+
+/**
+ * struct sdw_dpn_prop - Data Port DPn properties
+ * @num: port number
+ * @max_word: Maximum number of bits in a Payload Channel Sample, 1 to 64
+ * (inclusive)
+ * @min_word: Minimum number of bits in a Payload Channel Sample, 1 to 64
+ * (inclusive)
+ * @num_words: Number of discrete supported wordlengths
+ * @words: Discrete supported wordlength
+ * @type: Data port type. Full, Simplified or Reduced
+ * @max_grouping: Maximum number of samples that can be grouped together for
+ * a full data port
+ * @simple_ch_prep_sm: If the port supports simplified channel prepare state
+ * machine
+ * @ch_prep_timeout: Port-specific timeout value, in milliseconds
+ * @device_interrupts: If set, each bit corresponds to support for
+ * implementation-defined interrupts
+ * @max_ch: Maximum channels supported
+ * @min_ch: Minimum channels supported
+ * @num_ch: Number of discrete channels supported
+ * @ch: Discrete channels supported
+ * @num_ch_combinations: Number of channel combinations supported
+ * @ch_combinations: Channel combinations supported
+ * @modes: SDW mode supported
+ * @max_async_buffer: Number of samples that this port can buffer in
+ * asynchronous modes
+ * @block_pack_mode: Type of block port mode supported
+ * @port_encoding: Payload Channel Sample encoding schemes supported
+ * @audio_modes: Audio modes supported
+ */
+struct sdw_dpn_prop {
+ u32 num;
+ u32 max_word;
+ u32 min_word;
+ u32 num_words;
+ u32 *words;
+ enum sdw_dpn_type type;
+ u32 max_grouping;
+ bool simple_ch_prep_sm;
+ u32 ch_prep_timeout;
+ u32 device_interrupts;
+ u32 max_ch;
+ u32 min_ch;
+ u32 num_ch;
+ u32 *ch;
+ u32 num_ch_combinations;
+ u32 *ch_combinations;
+ u32 modes;
+ u32 max_async_buffer;
+ bool block_pack_mode;
+ u32 port_encoding;
+ struct sdw_dpn_audio_mode *audio_modes;
+};
+
+/**
+ * struct sdw_slave_prop - SoundWire Slave properties
+ * @mipi_revision: Spec version of the implementation
+ * @wake_capable: Wake-up events are supported
+ * @test_mode_capable: If test mode is supported
+ * @clk_stop_mode1: Clock-Stop Mode 1 is supported
+ * @simple_clk_stop_capable: Simple clock mode is supported
+ * @clk_stop_timeout: Worst-case latency of the Clock Stop Prepare State
+ * Machine transitions, in milliseconds
+ * @ch_prep_timeout: Worst-case latency of the Channel Prepare State Machine
+ * transitions, in milliseconds
+ * @reset_behave: Slave keeps the status of the SlaveStopClockPrepare
+ * state machine (P=1 SCSP_SM) after exit from clock-stop mode1
+ * @high_PHY_capable: Slave is HighPHY capable
+ * @paging_support: Slave implements paging registers SCP_AddrPage1 and
+ * SCP_AddrPage2
+ * @bank_delay_support: Slave implements bank delay/bridge support registers
+ * SCP_BankDelay and SCP_NextFrame
+ * @p15_behave: Slave behavior when the Master attempts a read to the Port15
+ * alias
+ * @lane_control_support: Slave supports lane control
+ * @master_count: Number of Masters present on this Slave
+ * @source_ports: Bitmap identifying source ports
+ * @sink_ports: Bitmap identifying sink ports
+ * @dp0_prop: Data Port 0 properties
+ * @src_dpn_prop: Source Data Port N properties
+ * @sink_dpn_prop: Sink Data Port N properties
+ */
+struct sdw_slave_prop {
+ u32 mipi_revision;
+ bool wake_capable;
+ bool test_mode_capable;
+ bool clk_stop_mode1;
+ bool simple_clk_stop_capable;
+ u32 clk_stop_timeout;
+ u32 ch_prep_timeout;
+ enum sdw_clk_stop_reset_behave reset_behave;
+ bool high_PHY_capable;
+ bool paging_support;
+ bool bank_delay_support;
+ enum sdw_p15_behave p15_behave;
+ bool lane_control_support;
+ u32 master_count;
+ u32 source_ports;
+ u32 sink_ports;
+ struct sdw_dp0_prop *dp0_prop;
+ struct sdw_dpn_prop *src_dpn_prop;
+ struct sdw_dpn_prop *sink_dpn_prop;
+};
+
+/**
+ * struct sdw_master_prop - Master properties
+ * @revision: MIPI spec version of the implementation
+ * @master_count: Number of masters
+ * @clk_stop_mode: Bitmap for Clock Stop modes supported
+ * @max_freq: Maximum Bus clock frequency, in Hz
+ * @num_clk_gears: Number of clock gears supported
+ * @clk_gears: Clock gears supported
+ * @num_freq: Number of clock frequencies supported, in Hz
+ * @freq: Clock frequencies supported, in Hz
+ * @default_frame_rate: Controller default Frame rate, in Hz
+ * @default_row: Number of rows
+ * @default_col: Number of columns
+ * @dynamic_frame: Dynamic frame supported
+ * @err_threshold: Number of times that software may retry sending a single
+ * command
+ * @dpn_prop: Data Port N properties
+ */
+struct sdw_master_prop {
+ u32 revision;
+ u32 master_count;
+ enum sdw_clk_stop_mode clk_stop_mode;
+ u32 max_freq;
+ u32 num_clk_gears;
+ u32 *clk_gears;
+ u32 num_freq;
+ u32 *freq;
+ u32 default_frame_rate;
+ u32 default_row;
+ u32 default_col;
+ bool dynamic_frame;
+ u32 err_threshold;
+ struct sdw_dpn_prop *dpn_prop;
+};
+
+int sdw_master_read_prop(struct sdw_bus *bus);
+int sdw_slave_read_prop(struct sdw_slave *slave);
+
+/*
+ * SDW Slave Structures and APIs
+ */
+
+/**
+ * struct sdw_slave_id - Slave ID
+ * @mfg_id: MIPI Manufacturer ID
+ * @part_id: Device Part ID
+ * @class_id: MIPI Class ID, unused now.
+ * Currently a placeholder in MIPI SoundWire Spec
+ * @unique_id: Device unique ID
+ * @sdw_version: SDW version implemented
+ *
+ * The order of the IDs here does not follow the DisCo spec definitions
+ */
+struct sdw_slave_id {
+ __u16 mfg_id;
+ __u16 part_id;
+ __u8 class_id;
+ __u8 unique_id:4;
+ __u8 sdw_version:4;
+};
+
+/**
+ * struct sdw_slave_intr_status - Slave interrupt status
+ * @control_port: control port status
+ * @port: data port status
+ */
+struct sdw_slave_intr_status {
+ u8 control_port;
+ u8 port[15];
+};
+
+/**
+ * struct sdw_slave_ops - Slave driver callback ops
+ * @read_prop: Read Slave properties
+ * @interrupt_callback: Device interrupt notification (invoked in thread
+ * context)
+ * @update_status: Update Slave status
+ */
+struct sdw_slave_ops {
+ int (*read_prop)(struct sdw_slave *sdw);
+ int (*interrupt_callback)(struct sdw_slave *slave,
+ struct sdw_slave_intr_status *status);
+ int (*update_status)(struct sdw_slave *slave,
+ enum sdw_slave_status status);
+};
+
+/**
+ * struct sdw_slave - SoundWire Slave
+ * @id: MIPI device ID
+ * @dev: Linux device
+ * @status: Status reported by the Slave
+ * @bus: Bus handle
+ * @ops: Slave callback ops
+ * @prop: Slave properties
+ * @node: node for bus list
+ * @port_ready: Port ready completion flag for each Slave port
+ * @dev_num: Device Number assigned by Bus
+ */
+struct sdw_slave {
+ struct sdw_slave_id id;
+ struct device dev;
+ enum sdw_slave_status status;
+ struct sdw_bus *bus;
+ const struct sdw_slave_ops *ops;
+ struct sdw_slave_prop prop;
+ struct list_head node;
+ struct completion *port_ready;
+ u16 dev_num;
+};
+
+#define dev_to_sdw_dev(_dev) container_of(_dev, struct sdw_slave, dev)
+
+struct sdw_driver {
+ const char *name;
+
+ int (*probe)(struct sdw_slave *sdw,
+ const struct sdw_device_id *id);
+ int (*remove)(struct sdw_slave *sdw);
+ void (*shutdown)(struct sdw_slave *sdw);
+
+ const struct sdw_device_id *id_table;
+ const struct sdw_slave_ops *ops;
+
+ struct device_driver driver;
+};
+
+#define SDW_SLAVE_ENTRY(_mfg_id, _part_id, _drv_data) \
+ { .mfg_id = (_mfg_id), .part_id = (_part_id), \
+ .driver_data = (unsigned long)(_drv_data) }
+
+int sdw_handle_slave_status(struct sdw_bus *bus,
+ enum sdw_slave_status status[]);
+
+/*
+ * SDW master structures and APIs
+ */
+
+struct sdw_msg;
+
+/**
+ * struct sdw_defer - SDW deffered message
+ * @length: message length
+ * @complete: message completion
+ * @msg: SDW message
+ */
+struct sdw_defer {
+ int length;
+ struct completion complete;
+ struct sdw_msg *msg;
+};
+
+/**
+ * struct sdw_master_ops - Master driver ops
+ * @read_prop: Read Master properties
+ * @xfer_msg: Transfer message callback
+ * @xfer_msg_defer: Defer version of transfer message callback
+ * @reset_page_addr: Reset the SCP page address registers
+ */
+struct sdw_master_ops {
+ int (*read_prop)(struct sdw_bus *bus);
+
+ enum sdw_command_response (*xfer_msg)
+ (struct sdw_bus *bus, struct sdw_msg *msg);
+ enum sdw_command_response (*xfer_msg_defer)
+ (struct sdw_bus *bus, struct sdw_msg *msg,
+ struct sdw_defer *defer);
+ enum sdw_command_response (*reset_page_addr)
+ (struct sdw_bus *bus, unsigned int dev_num);
+};
+
+/**
+ * struct sdw_bus - SoundWire bus
+ * @dev: Master linux device
+ * @link_id: Link id number, can be 0 to N, unique for each Master
+ * @slaves: list of Slaves on this bus
+ * @assigned: Bitmap for Slave device numbers.
+ * Bit set implies used number, bit clear implies unused number.
+ * @bus_lock: bus lock
+ * @msg_lock: message lock
+ * @ops: Master callback ops
+ * @prop: Master properties
+ * @defer_msg: Defer message
+ * @clk_stop_timeout: Clock stop timeout computed
+ */
+struct sdw_bus {
+ struct device *dev;
+ unsigned int link_id;
+ struct list_head slaves;
+ DECLARE_BITMAP(assigned, SDW_MAX_DEVICES);
+ struct mutex bus_lock;
+ struct mutex msg_lock;
+ const struct sdw_master_ops *ops;
+ struct sdw_master_prop prop;
+ struct sdw_defer defer_msg;
+ unsigned int clk_stop_timeout;
+};
+
+int sdw_add_bus_master(struct sdw_bus *bus);
+void sdw_delete_bus_master(struct sdw_bus *bus);
+
+/* messaging and data APIs */
+
+int sdw_read(struct sdw_slave *slave, u32 addr);
+int sdw_write(struct sdw_slave *slave, u32 addr, u8 value);
+int sdw_nread(struct sdw_slave *slave, u32 addr, size_t count, u8 *val);
+int sdw_nwrite(struct sdw_slave *slave, u32 addr, size_t count, u8 *val);
+
+#endif /* __SOUNDWIRE_H */