diff options
Diffstat (limited to 'include/linux/usb.h')
| -rw-r--r-- | include/linux/usb.h | 79 |
1 files changed, 66 insertions, 13 deletions
diff --git a/include/linux/usb.h b/include/linux/usb.h index 73b68d1f2cb0..dea39dc551d4 100644 --- a/include/linux/usb.h +++ b/include/linux/usb.h @@ -351,10 +351,6 @@ struct usb_bus { int bandwidth_int_reqs; /* number of Interrupt requests */ int bandwidth_isoc_reqs; /* number of Isoc. requests */ -#ifdef CONFIG_USB_DEVICEFS - struct dentry *usbfs_dentry; /* usbfs dentry entry for the bus */ -#endif - #if defined(CONFIG_USB_MON) || defined(CONFIG_USB_MON_MODULE) struct mon_bus *mon_bus; /* non-null when associated */ int monitored; /* non-zero when monitored */ @@ -382,6 +378,45 @@ enum usb_device_removable { USB_DEVICE_FIXED, }; +/* + * USB 3.0 Link Power Management (LPM) parameters. + * + * PEL and SEL are USB 3.0 Link PM latencies for device-initiated LPM exit. + * MEL is the USB 3.0 Link PM latency for host-initiated LPM exit. + * All three are stored in nanoseconds. + */ +struct usb3_lpm_parameters { + /* + * Maximum exit latency (MEL) for the host to send a packet to the + * device (either a Ping for isoc endpoints, or a data packet for + * interrupt endpoints), the hubs to decode the packet, and for all hubs + * in the path to transition the links to U0. + */ + unsigned int mel; + /* + * Maximum exit latency for a device-initiated LPM transition to bring + * all links into U0. Abbreviated as "PEL" in section 9.4.12 of the USB + * 3.0 spec, with no explanation of what "P" stands for. "Path"? + */ + unsigned int pel; + + /* + * The System Exit Latency (SEL) includes PEL, and three other + * latencies. After a device initiates a U0 transition, it will take + * some time from when the device sends the ERDY to when it will finally + * receive the data packet. Basically, SEL should be the worse-case + * latency from when a device starts initiating a U0 transition to when + * it will get data. + */ + unsigned int sel; + /* + * The idle timeout value that is currently programmed into the parent + * hub for this device. When the timer counts to zero, the parent hub + * will initiate an LPM transition to either U1 or U2. + */ + int timeout; +}; + /** * struct usb_device - kernel's representation of a USB device * @devnum: device number; address on a USB bus @@ -439,6 +474,12 @@ enum usb_device_removable { * specific data for the device. * @slot_id: Slot ID assigned by xHCI * @removable: Device can be physically removed from this port + * @u1_params: exit latencies for USB3 U1 LPM state, and hub-initiated timeout. + * @u2_params: exit latencies for USB3 U2 LPM state, and hub-initiated timeout. + * @lpm_disable_count: Ref count used by usb_disable_lpm() and usb_enable_lpm() + * to keep track of the number of functions that require USB 3.0 Link Power + * Management to be disabled for this usb_device. This count should only + * be manipulated by those functions, with the bandwidth_mutex is held. * * Notes: * Usbcore drivers should not set usbdev->state directly. Instead use @@ -485,6 +526,7 @@ struct usb_device { unsigned lpm_capable:1; unsigned usb2_hw_lpm_capable:1; unsigned usb2_hw_lpm_enabled:1; + unsigned usb3_lpm_enabled:1; int string_langid; /* static strings from the device */ @@ -493,12 +535,6 @@ struct usb_device { char *serial; struct list_head filelist; -#ifdef CONFIG_USB_DEVICE_CLASS - struct device *usb_classdev; -#endif -#ifdef CONFIG_USB_DEVICEFS - struct dentry *usbfs_dentry; -#endif int maxchild; struct usb_device **children; @@ -517,6 +553,10 @@ struct usb_device { struct wusb_dev *wusb_dev; int slot_id; enum usb_device_removable removable; + struct usb3_lpm_parameters u1_params; + struct usb3_lpm_parameters u2_params; + unsigned lpm_disable_count; + unsigned hub_initiated_lpm_disable_count; }; #define to_usb_device(d) container_of(d, struct usb_device, dev) @@ -583,6 +623,12 @@ static inline void usb_mark_last_busy(struct usb_device *udev) { } #endif +extern int usb_disable_lpm(struct usb_device *udev); +extern void usb_enable_lpm(struct usb_device *udev); +/* Same as above, but these functions lock/unlock the bandwidth_mutex. */ +extern int usb_unlocked_disable_lpm(struct usb_device *udev); +extern void usb_unlocked_enable_lpm(struct usb_device *udev); + /*-------------------------------------------------------------------------*/ /* for drivers using iso endpoints */ @@ -800,6 +846,8 @@ extern ssize_t usb_store_new_id(struct usb_dynids *dynids, struct device_driver *driver, const char *buf, size_t count); +extern ssize_t usb_show_dynids(struct usb_dynids *dynids, char *buf); + /** * struct usbdrv_wrap - wrapper for driver-model structure * @driver: The driver-model core driver structure. @@ -850,6 +898,9 @@ struct usbdrv_wrap { * for interfaces bound to this driver. * @soft_unbind: if set to 1, the USB core will not kill URBs and disable * endpoints before calling the driver's disconnect method. + * @disable_hub_initiated_lpm: if set to 0, the USB core will not allow hubs + * to initiate lower power link state transitions when an idle timeout + * occurs. Device-initiated USB 3.0 link PM will still be allowed. * * USB interface drivers must provide a name, probe() and disconnect() * methods, and an id_table. Other driver fields are optional. @@ -890,6 +941,7 @@ struct usb_driver { struct usbdrv_wrap drvwrap; unsigned int no_dynamic_id:1; unsigned int supports_autosuspend:1; + unsigned int disable_hub_initiated_lpm:1; unsigned int soft_unbind:1; }; #define to_usb_driver(d) container_of(d, struct usb_driver, drvwrap.driver) @@ -1379,6 +1431,7 @@ extern int usb_unlink_urb(struct urb *urb); extern void usb_kill_urb(struct urb *urb); extern void usb_poison_urb(struct urb *urb); extern void usb_unpoison_urb(struct urb *urb); +extern void usb_block_urb(struct urb *urb); extern void usb_kill_anchored_urbs(struct usb_anchor *anchor); extern void usb_poison_anchored_urbs(struct usb_anchor *anchor); extern void usb_unpoison_anchored_urbs(struct usb_anchor *anchor); @@ -1391,6 +1444,8 @@ extern struct urb *usb_get_from_anchor(struct usb_anchor *anchor); extern void usb_scuttle_anchored_urbs(struct usb_anchor *anchor); extern int usb_anchor_empty(struct usb_anchor *anchor); +#define usb_unblock_urb usb_unpoison_urb + /** * usb_urb_dir_in - check if an URB describes an IN transfer * @urb: URB to be checked @@ -1627,6 +1682,7 @@ static inline int usb_translate_errors(int error_code) case 0: case -ENOMEM: case -ENODEV: + case -EOPNOTSUPP: return error_code; default: return -EIO; @@ -1652,9 +1708,6 @@ do { \ } while (0) #endif -#define err(format, arg...) \ - printk(KERN_ERR KBUILD_MODNAME ": " format "\n", ##arg) - /* debugfs stuff */ extern struct dentry *usb_debug_root; |