diff options
Diffstat (limited to 'include/linux/usb')
| -rw-r--r-- | include/linux/usb/chipidea.h | 7 | ||||
| -rw-r--r-- | include/linux/usb/dwc3-omap.h | 30 | ||||
| -rw-r--r-- | include/linux/usb/gadget.h | 4 | ||||
| -rw-r--r-- | include/linux/usb/hcd.h | 19 | ||||
| -rw-r--r-- | include/linux/usb/of.h | 10 | ||||
| -rw-r--r-- | include/linux/usb/phy.h | 18 | ||||
| -rw-r--r-- | include/linux/usb/tegra_usb_phy.h | 40 | ||||
| -rw-r--r-- | include/linux/usb/usb_phy_gen_xceiv.h (renamed from include/linux/usb/nop-usb-xceiv.h) | 4 | ||||
| -rw-r--r-- | include/linux/usb/usbnet.h | 1 | ||||
| -rw-r--r-- | include/linux/usb/wusb-wa.h | 1 |
10 files changed, 75 insertions, 59 deletions
diff --git a/include/linux/usb/chipidea.h b/include/linux/usb/chipidea.h index 25629948c842..7d399671a566 100644 --- a/include/linux/usb/chipidea.h +++ b/include/linux/usb/chipidea.h @@ -18,12 +18,17 @@ struct ci_hdrc_platform_data { unsigned long flags; #define CI_HDRC_REGS_SHARED BIT(0) #define CI_HDRC_REQUIRE_TRANSCEIVER BIT(1) -#define CI_HDRC_PULLUP_ON_VBUS BIT(2) #define CI_HDRC_DISABLE_STREAMING BIT(3) + /* + * Only set it when DCCPARAMS.DC==1 and DCCPARAMS.HC==1, + * but otg is not supported (no register otgsc). + */ +#define CI_HDRC_DUAL_ROLE_NOT_OTG BIT(4) enum usb_dr_mode dr_mode; #define CI_HDRC_CONTROLLER_RESET_EVENT 0 #define CI_HDRC_CONTROLLER_STOPPED_EVENT 1 void (*notify_event) (struct ci_hdrc *ci, unsigned event); + struct regulator *reg_vbus; }; /* Default offset of capability registers */ diff --git a/include/linux/usb/dwc3-omap.h b/include/linux/usb/dwc3-omap.h deleted file mode 100644 index 5615f4d82724..000000000000 --- a/include/linux/usb/dwc3-omap.h +++ /dev/null @@ -1,30 +0,0 @@ -/* - * Copyright (C) 2013 by Texas Instruments - * - * The Inventra Controller Driver for Linux is free software; you - * can redistribute it and/or modify it under the terms of the GNU - * General Public License version 2 as published by the Free Software - * Foundation. - */ - -#ifndef __DWC3_OMAP_H__ -#define __DWC3_OMAP_H__ - -enum omap_dwc3_vbus_id_status { - OMAP_DWC3_UNKNOWN = 0, - OMAP_DWC3_ID_GROUND, - OMAP_DWC3_ID_FLOAT, - OMAP_DWC3_VBUS_VALID, - OMAP_DWC3_VBUS_OFF, -}; - -#if (defined(CONFIG_USB_DWC3) || defined(CONFIG_USB_DWC3_MODULE)) -extern int dwc3_omap_mailbox(enum omap_dwc3_vbus_id_status status); -#else -static inline int dwc3_omap_mailbox(enum omap_dwc3_vbus_id_status status) -{ - return -ENODEV; -} -#endif - -#endif /* __DWC3_OMAP_H__ */ diff --git a/include/linux/usb/gadget.h b/include/linux/usb/gadget.h index f1b0dca60f12..942ef5e053bf 100644 --- a/include/linux/usb/gadget.h +++ b/include/linux/usb/gadget.h @@ -22,6 +22,7 @@ #include <linux/slab.h> #include <linux/scatterlist.h> #include <linux/types.h> +#include <linux/workqueue.h> #include <linux/usb/ch9.h> struct usb_ep; @@ -475,6 +476,7 @@ struct usb_gadget_ops { /** * struct usb_gadget - represents a usb slave device + * @work: (internal use) Workqueue to be used for sysfs_notify() * @ops: Function pointers used to access hardware-specific operations. * @ep0: Endpoint zero, used when reading or writing responses to * driver setup() requests @@ -520,6 +522,7 @@ struct usb_gadget_ops { * device is acting as a B-Peripheral (so is_a_peripheral is false). */ struct usb_gadget { + struct work_struct work; /* readonly to gadget driver */ const struct usb_gadget_ops *ops; struct usb_ep *ep0; @@ -538,6 +541,7 @@ struct usb_gadget { unsigned out_epnum; unsigned in_epnum; }; +#define work_to_gadget(w) (container_of((w), struct usb_gadget, work)) static inline void set_gadget_data(struct usb_gadget *gadget, void *data) { dev_set_drvdata(&gadget->dev, data); } diff --git a/include/linux/usb/hcd.h b/include/linux/usb/hcd.h index 1e88377e22f4..75efc45eaa2f 100644 --- a/include/linux/usb/hcd.h +++ b/include/linux/usb/hcd.h @@ -22,6 +22,7 @@ #ifdef __KERNEL__ #include <linux/rwsem.h> +#include <linux/interrupt.h> #define MAX_TOPO_LEVEL 6 @@ -67,6 +68,13 @@ /*-------------------------------------------------------------------------*/ +struct giveback_urb_bh { + bool running; + spinlock_t lock; + struct list_head head; + struct tasklet_struct bh; +}; + struct usb_hcd { /* @@ -139,6 +147,9 @@ struct usb_hcd { resource_size_t rsrc_len; /* memory/io resource length */ unsigned power_budget; /* in mA, 0 = no limit */ + struct giveback_urb_bh high_prio_bh; + struct giveback_urb_bh low_prio_bh; + /* bandwidth_mutex should be taken before adding or removing * any new bus bandwidth constraints: * 1. Before adding a configuration for a new device. @@ -221,6 +232,7 @@ struct hc_driver { #define HCD_USB25 0x0030 /* Wireless USB 1.0 (USB 2.5)*/ #define HCD_USB3 0x0040 /* USB 3.0 */ #define HCD_MASK 0x0070 +#define HCD_BH 0x0100 /* URB complete in BH context */ /* called to init HCD and root hub */ int (*reset) (struct usb_hcd *hcd); @@ -361,6 +373,11 @@ struct hc_driver { int (*find_raw_port_number)(struct usb_hcd *, int); }; +static inline int hcd_giveback_urb_in_bh(struct usb_hcd *hcd) +{ + return hcd->driver->flags & HCD_BH; +} + extern int usb_hcd_link_urb_to_ep(struct usb_hcd *hcd, struct urb *urb); extern int usb_hcd_check_unlink_urb(struct usb_hcd *hcd, struct urb *urb, int status); @@ -411,7 +428,7 @@ extern int usb_hcd_pci_probe(struct pci_dev *dev, extern void usb_hcd_pci_remove(struct pci_dev *dev); extern void usb_hcd_pci_shutdown(struct pci_dev *dev); -#ifdef CONFIG_PM_SLEEP +#ifdef CONFIG_PM extern const struct dev_pm_ops usb_hcd_pci_pm_ops; #endif #endif /* CONFIG_PCI */ diff --git a/include/linux/usb/of.h b/include/linux/usb/of.h index a0ef405368b8..8c38aa26b3bb 100644 --- a/include/linux/usb/of.h +++ b/include/linux/usb/of.h @@ -7,19 +7,27 @@ #ifndef __LINUX_USB_OF_H #define __LINUX_USB_OF_H +#include <linux/usb/ch9.h> #include <linux/usb/otg.h> #include <linux/usb/phy.h> #if IS_ENABLED(CONFIG_OF) enum usb_dr_mode of_usb_get_dr_mode(struct device_node *np); +enum usb_device_speed of_usb_get_maximum_speed(struct device_node *np); #else static inline enum usb_dr_mode of_usb_get_dr_mode(struct device_node *np) { return USB_DR_MODE_UNKNOWN; } + +static inline enum usb_device_speed +of_usb_get_maximum_speed(struct device_node *np) +{ + return USB_SPEED_UNKNOWN; +} #endif -#if IS_ENABLED(CONFIG_OF) && IS_ENABLED(CONFIG_USB_PHY) +#if IS_ENABLED(CONFIG_OF) && IS_ENABLED(CONFIG_USB_SUPPORT) enum usb_phy_interface of_usb_get_phy_mode(struct device_node *np); #else static inline enum usb_phy_interface of_usb_get_phy_mode(struct device_node *np) diff --git a/include/linux/usb/phy.h b/include/linux/usb/phy.h index 44036808bf0f..6c0b1c513db7 100644 --- a/include/linux/usb/phy.h +++ b/include/linux/usb/phy.h @@ -142,7 +142,7 @@ extern void usb_remove_phy(struct usb_phy *); /* helpers for direct access thru low-level io interface */ static inline int usb_phy_io_read(struct usb_phy *x, u32 reg) { - if (x->io_ops && x->io_ops->read) + if (x && x->io_ops && x->io_ops->read) return x->io_ops->read(x, reg); return -EINVAL; @@ -150,7 +150,7 @@ static inline int usb_phy_io_read(struct usb_phy *x, u32 reg) static inline int usb_phy_io_write(struct usb_phy *x, u32 val, u32 reg) { - if (x->io_ops && x->io_ops->write) + if (x && x->io_ops && x->io_ops->write) return x->io_ops->write(x, val, reg); return -EINVAL; @@ -159,7 +159,7 @@ static inline int usb_phy_io_write(struct usb_phy *x, u32 val, u32 reg) static inline int usb_phy_init(struct usb_phy *x) { - if (x->init) + if (x && x->init) return x->init(x); return 0; @@ -168,14 +168,14 @@ usb_phy_init(struct usb_phy *x) static inline void usb_phy_shutdown(struct usb_phy *x) { - if (x->shutdown) + if (x && x->shutdown) x->shutdown(x); } static inline int usb_phy_vbus_on(struct usb_phy *x) { - if (!x->set_vbus) + if (!x || !x->set_vbus) return 0; return x->set_vbus(x, true); @@ -184,7 +184,7 @@ usb_phy_vbus_on(struct usb_phy *x) static inline int usb_phy_vbus_off(struct usb_phy *x) { - if (!x->set_vbus) + if (!x || !x->set_vbus) return 0; return x->set_vbus(x, false); @@ -258,7 +258,7 @@ usb_phy_set_power(struct usb_phy *x, unsigned mA) static inline int usb_phy_set_suspend(struct usb_phy *x, int suspend) { - if (x->set_suspend != NULL) + if (x && x->set_suspend != NULL) return x->set_suspend(x, suspend); else return 0; @@ -267,7 +267,7 @@ usb_phy_set_suspend(struct usb_phy *x, int suspend) static inline int usb_phy_notify_connect(struct usb_phy *x, enum usb_device_speed speed) { - if (x->notify_connect) + if (x && x->notify_connect) return x->notify_connect(x, speed); else return 0; @@ -276,7 +276,7 @@ usb_phy_notify_connect(struct usb_phy *x, enum usb_device_speed speed) static inline int usb_phy_notify_disconnect(struct usb_phy *x, enum usb_device_speed speed) { - if (x->notify_disconnect) + if (x && x->notify_disconnect) return x->notify_disconnect(x, speed); else return 0; diff --git a/include/linux/usb/tegra_usb_phy.h b/include/linux/usb/tegra_usb_phy.h index d2ca919a5b73..1de16c324ec8 100644 --- a/include/linux/usb/tegra_usb_phy.h +++ b/include/linux/usb/tegra_usb_phy.h @@ -18,19 +18,36 @@ #include <linux/clk.h> #include <linux/usb/otg.h> +/* + * utmi_pll_config_in_car_module: true if the UTMI PLL configuration registers + * should be set up by clk-tegra, false if by the PHY code + * has_hostpc: true if the USB controller has the HOSTPC extension, which + * changes the location of the PHCD and PTS fields + * requires_usbmode_setup: true if the USBMODE register needs to be set to + * enter host mode + * requires_extra_tuning_parameters: true if xcvr_hsslew, hssquelch_level + * and hsdiscon_level should be set for adequate signal quality + */ + +struct tegra_phy_soc_config { + bool utmi_pll_config_in_car_module; + bool has_hostpc; + bool requires_usbmode_setup; + bool requires_extra_tuning_parameters; +}; + struct tegra_utmip_config { u8 hssync_start_delay; u8 elastic_limit; u8 idle_wait_delay; u8 term_range_adj; + bool xcvr_setup_use_fuses; u8 xcvr_setup; u8 xcvr_lsfslew; u8 xcvr_lsrslew; -}; - -struct tegra_ulpi_config { - int reset_gpio; - const char *clk; + u8 xcvr_hsslew; + u8 hssquelch_level; + u8 hsdiscon_level; }; enum tegra_usb_phy_port_speed { @@ -39,12 +56,6 @@ enum tegra_usb_phy_port_speed { TEGRA_USB_PHY_PORT_SPEED_HIGH, }; -enum tegra_usb_phy_mode { - TEGRA_USB_PHY_MODE_DEVICE, - TEGRA_USB_PHY_MODE_HOST, - TEGRA_USB_PHY_MODE_OTG, -}; - struct tegra_xtal_freq; struct tegra_usb_phy { @@ -55,18 +66,17 @@ struct tegra_usb_phy { struct clk *clk; struct clk *pll_u; struct clk *pad_clk; - enum tegra_usb_phy_mode mode; + struct regulator *vbus; + enum usb_dr_mode mode; void *config; + const struct tegra_phy_soc_config *soc_config; struct usb_phy *ulpi; struct usb_phy u_phy; - struct device *dev; bool is_legacy_phy; bool is_ulpi_phy; int reset_gpio; }; -struct usb_phy *tegra_usb_get_phy(struct device_node *dn); - void tegra_usb_phy_preresume(struct usb_phy *phy); void tegra_usb_phy_postresume(struct usb_phy *phy); diff --git a/include/linux/usb/nop-usb-xceiv.h b/include/linux/usb/usb_phy_gen_xceiv.h index 148d35171aac..f9a7e7bc925b 100644 --- a/include/linux/usb/nop-usb-xceiv.h +++ b/include/linux/usb/usb_phy_gen_xceiv.h @@ -3,7 +3,7 @@ #include <linux/usb/otg.h> -struct nop_usb_xceiv_platform_data { +struct usb_phy_gen_xceiv_platform_data { enum usb_phy_type type; unsigned long clk_rate; @@ -12,7 +12,7 @@ struct nop_usb_xceiv_platform_data { unsigned int needs_reset:1; }; -#if defined(CONFIG_NOP_USB_XCEIV) || (defined(CONFIG_NOP_USB_XCEIV_MODULE) && defined(MODULE)) +#if IS_ENABLED(CONFIG_NOP_USB_XCEIV) /* sometimes transceivers are accessed only through e.g. ULPI */ extern void usb_nop_xceiv_register(void); extern void usb_nop_xceiv_unregister(void); diff --git a/include/linux/usb/usbnet.h b/include/linux/usb/usbnet.h index f18d64129f99..2b47e6364e36 100644 --- a/include/linux/usb/usbnet.h +++ b/include/linux/usb/usbnet.h @@ -34,6 +34,7 @@ struct usbnet { struct mutex phy_mutex; unsigned char suspend_count; unsigned char pkt_cnt, pkt_err; + unsigned can_dma_sg:1; /* i/o info: pipes etc */ unsigned in, out; diff --git a/include/linux/usb/wusb-wa.h b/include/linux/usb/wusb-wa.h index 6be985b2a434..4ff744e2b678 100644 --- a/include/linux/usb/wusb-wa.h +++ b/include/linux/usb/wusb-wa.h @@ -66,6 +66,7 @@ enum { WA_ENABLE = 0x01, WA_RESET = 0x02, RPIPE_PAUSE = 0x1, + RPIPE_STALL = 0x2, }; /* Responses from Get Status request ([WUSB] section 8.3.1.6) */ |