diff options
Diffstat (limited to 'include/linux')
252 files changed, 7056 insertions, 1248 deletions
diff --git a/include/linux/acpi.h b/include/linux/acpi.h index 90be98981102..3994d7790b23 100644 --- a/include/linux/acpi.h +++ b/include/linux/acpi.h @@ -25,7 +25,9 @@ #ifndef _LINUX_ACPI_H #define _LINUX_ACPI_H +#include <linux/errno.h> #include <linux/ioport.h> /* for struct resource */ +#include <linux/device.h> #ifdef CONFIG_ACPI @@ -76,6 +78,14 @@ typedef int (*acpi_table_handler) (struct acpi_table_header *table); typedef int (*acpi_table_entry_handler) (struct acpi_subtable_header *header, const unsigned long end); +#ifdef CONFIG_ACPI_INITRD_TABLE_OVERRIDE +void acpi_initrd_override(void *data, size_t size); +#else +static inline void acpi_initrd_override(void *data, size_t size) +{ +} +#endif + char * __acpi_map_table (unsigned long phys_addr, unsigned long size); void __acpi_unmap_table(char *map, unsigned long size); int early_acpi_boot_init(void); @@ -250,6 +260,26 @@ extern int pnpacpi_disabled; #define PXM_INVAL (-1) +bool acpi_dev_resource_memory(struct acpi_resource *ares, struct resource *res); +bool acpi_dev_resource_io(struct acpi_resource *ares, struct resource *res); +bool acpi_dev_resource_address_space(struct acpi_resource *ares, + struct resource *res); +bool acpi_dev_resource_ext_address_space(struct acpi_resource *ares, + struct resource *res); +unsigned long acpi_dev_irq_flags(u8 triggering, u8 polarity, u8 shareable); +bool acpi_dev_resource_interrupt(struct acpi_resource *ares, int index, + struct resource *res); + +struct resource_list_entry { + struct list_head node; + struct resource res; +}; + +void acpi_dev_free_resource_list(struct list_head *list); +int acpi_dev_get_resources(struct acpi_device *adev, struct list_head *list, + int (*preproc)(struct acpi_resource *, void *), + void *preproc_data); + int acpi_check_resource_conflict(const struct resource *res); int acpi_check_region(resource_size_t start, resource_size_t n, @@ -257,10 +287,14 @@ int acpi_check_region(resource_size_t start, resource_size_t n, int acpi_resources_are_enforced(void); -#ifdef CONFIG_PM_SLEEP +#ifdef CONFIG_HIBERNATION void __init acpi_no_s4_hw_signature(void); +#endif + +#ifdef CONFIG_PM_SLEEP void __init acpi_old_suspend_ordering(void); void __init acpi_nvs_nosave(void); +void __init acpi_nvs_nosave_s3(void); #endif /* CONFIG_PM_SLEEP */ struct acpi_osc_context { @@ -364,6 +398,17 @@ extern int acpi_nvs_register(__u64 start, __u64 size); extern int acpi_nvs_for_each_region(int (*func)(__u64, __u64, void *), void *data); +const struct acpi_device_id *acpi_match_device(const struct acpi_device_id *ids, + const struct device *dev); + +static inline bool acpi_driver_match_device(struct device *dev, + const struct device_driver *drv) +{ + return !!acpi_match_device(drv->acpi_match_table, dev); +} + +#define ACPI_PTR(_ptr) (_ptr) + #else /* !CONFIG_ACPI */ #define acpi_disabled 1 @@ -418,6 +463,22 @@ static inline int acpi_nvs_for_each_region(int (*func)(__u64, __u64, void *), return 0; } +struct acpi_device_id; + +static inline const struct acpi_device_id *acpi_match_device( + const struct acpi_device_id *ids, const struct device *dev) +{ + return NULL; +} + +static inline bool acpi_driver_match_device(struct device *dev, + const struct device_driver *drv) +{ + return false; +} + +#define ACPI_PTR(_ptr) (NULL) + #endif /* !CONFIG_ACPI */ #ifdef CONFIG_ACPI @@ -426,8 +487,96 @@ void acpi_os_set_prepare_sleep(int (*func)(u8 sleep_state, acpi_status acpi_os_prepare_sleep(u8 sleep_state, u32 pm1a_control, u32 pm1b_control); +#ifdef CONFIG_X86 +void arch_reserve_mem_area(acpi_physical_address addr, size_t size); +#else +static inline void arch_reserve_mem_area(acpi_physical_address addr, + size_t size) +{ +} +#endif /* CONFIG_X86 */ #else #define acpi_os_set_prepare_sleep(func, pm1a_ctrl, pm1b_ctrl) do { } while (0) #endif +#if defined(CONFIG_ACPI) && defined(CONFIG_PM_RUNTIME) +int acpi_dev_runtime_suspend(struct device *dev); +int acpi_dev_runtime_resume(struct device *dev); +int acpi_subsys_runtime_suspend(struct device *dev); +int acpi_subsys_runtime_resume(struct device *dev); +#else +static inline int acpi_dev_runtime_suspend(struct device *dev) { return 0; } +static inline int acpi_dev_runtime_resume(struct device *dev) { return 0; } +static inline int acpi_subsys_runtime_suspend(struct device *dev) { return 0; } +static inline int acpi_subsys_runtime_resume(struct device *dev) { return 0; } +#endif + +#ifdef CONFIG_ACPI_SLEEP +int acpi_dev_suspend_late(struct device *dev); +int acpi_dev_resume_early(struct device *dev); +int acpi_subsys_prepare(struct device *dev); +int acpi_subsys_suspend_late(struct device *dev); +int acpi_subsys_resume_early(struct device *dev); +#else +static inline int acpi_dev_suspend_late(struct device *dev) { return 0; } +static inline int acpi_dev_resume_early(struct device *dev) { return 0; } +static inline int acpi_subsys_prepare(struct device *dev) { return 0; } +static inline int acpi_subsys_suspend_late(struct device *dev) { return 0; } +static inline int acpi_subsys_resume_early(struct device *dev) { return 0; } +#endif + +#if defined(CONFIG_ACPI) && defined(CONFIG_PM) +int acpi_dev_pm_attach(struct device *dev, bool power_on); +void acpi_dev_pm_detach(struct device *dev, bool power_off); +#else +static inline int acpi_dev_pm_attach(struct device *dev, bool power_on) +{ + return -ENODEV; +} +static inline void acpi_dev_pm_detach(struct device *dev, bool power_off) {} +#endif + +#ifdef CONFIG_ACPI +__printf(3, 4) +void acpi_handle_printk(const char *level, acpi_handle handle, + const char *fmt, ...); +#else /* !CONFIG_ACPI */ +static inline __printf(3, 4) void +acpi_handle_printk(const char *level, void *handle, const char *fmt, ...) {} +#endif /* !CONFIG_ACPI */ + +/* + * acpi_handle_<level>: Print message with ACPI prefix and object path + * + * These interfaces acquire the global namespace mutex to obtain an object + * path. In interrupt context, it shows the object path as <n/a>. + */ +#define acpi_handle_emerg(handle, fmt, ...) \ + acpi_handle_printk(KERN_EMERG, handle, fmt, ##__VA_ARGS__) +#define acpi_handle_alert(handle, fmt, ...) \ + acpi_handle_printk(KERN_ALERT, handle, fmt, ##__VA_ARGS__) +#define acpi_handle_crit(handle, fmt, ...) \ + acpi_handle_printk(KERN_CRIT, handle, fmt, ##__VA_ARGS__) +#define acpi_handle_err(handle, fmt, ...) \ + acpi_handle_printk(KERN_ERR, handle, fmt, ##__VA_ARGS__) +#define acpi_handle_warn(handle, fmt, ...) \ + acpi_handle_printk(KERN_WARNING, handle, fmt, ##__VA_ARGS__) +#define acpi_handle_notice(handle, fmt, ...) \ + acpi_handle_printk(KERN_NOTICE, handle, fmt, ##__VA_ARGS__) +#define acpi_handle_info(handle, fmt, ...) \ + acpi_handle_printk(KERN_INFO, handle, fmt, ##__VA_ARGS__) + +/* REVISIT: Support CONFIG_DYNAMIC_DEBUG when necessary */ +#if defined(DEBUG) || defined(CONFIG_DYNAMIC_DEBUG) +#define acpi_handle_debug(handle, fmt, ...) \ + acpi_handle_printk(KERN_DEBUG, handle, fmt, ##__VA_ARGS__) +#else +#define acpi_handle_debug(handle, fmt, ...) \ +({ \ + if (0) \ + acpi_handle_printk(KERN_DEBUG, handle, fmt, ##__VA_ARGS__); \ + 0; \ +}) +#endif + #endif /*_LINUX_ACPI_H*/ diff --git a/include/linux/acpi_gpio.h b/include/linux/acpi_gpio.h new file mode 100644 index 000000000000..91615a389b65 --- /dev/null +++ b/include/linux/acpi_gpio.h @@ -0,0 +1,19 @@ +#ifndef _LINUX_ACPI_GPIO_H_ +#define _LINUX_ACPI_GPIO_H_ + +#include <linux/errno.h> + +#ifdef CONFIG_GPIO_ACPI + +int acpi_get_gpio(char *path, int pin); + +#else /* CONFIG_GPIO_ACPI */ + +static inline int acpi_get_gpio(char *path, int pin) +{ + return -ENODEV; +} + +#endif /* CONFIG_GPIO_ACPI */ + +#endif /* _LINUX_ACPI_GPIO_H_ */ diff --git a/include/linux/amba/bus.h b/include/linux/amba/bus.h index d36417158d8f..43ec7e247a80 100644 --- a/include/linux/amba/bus.h +++ b/include/linux/amba/bus.h @@ -71,6 +71,16 @@ struct amba_device *amba_ahb_device_add(struct device *parent, const char *name, resource_size_t base, size_t size, int irq1, int irq2, void *pdata, unsigned int periphid); +struct amba_device * +amba_apb_device_add_res(struct device *parent, const char *name, + resource_size_t base, size_t size, int irq1, + int irq2, void *pdata, unsigned int periphid, + struct resource *resbase); +struct amba_device * +amba_ahb_device_add_res(struct device *parent, const char *name, + resource_size_t base, size_t size, int irq1, + int irq2, void *pdata, unsigned int periphid, + struct resource *resbase); void amba_device_unregister(struct amba_device *); struct amba_device *amba_find_device(const char *, struct device *, unsigned int, unsigned int); int amba_request_regions(struct amba_device *, const char *); diff --git a/include/linux/ata_platform.h b/include/linux/ata_platform.h index b856a2a590d9..fe9989636b62 100644 --- a/include/linux/ata_platform.h +++ b/include/linux/ata_platform.h @@ -22,8 +22,6 @@ extern int __devinit __pata_platform_probe(struct device *dev, unsigned int ioport_shift, int __pio_mask); -extern int __devexit __pata_platform_remove(struct device *dev); - /* * Marvell SATA private data */ diff --git a/include/linux/ath9k_platform.h b/include/linux/ath9k_platform.h index 6e3f54f37844..fcdd81bd5314 100644 --- a/include/linux/ath9k_platform.h +++ b/include/linux/ath9k_platform.h @@ -22,6 +22,8 @@ #define ATH9K_PLAT_EEP_MAX_WORDS 2048 struct ath9k_platform_data { + const char *eeprom_name; + u16 eeprom_data[ATH9K_PLAT_EEP_MAX_WORDS]; u8 *macaddr; diff --git a/include/linux/atmdev.h b/include/linux/atmdev.h index 22ef21c33d0c..c1da539f5e28 100644 --- a/include/linux/atmdev.h +++ b/include/linux/atmdev.h @@ -99,6 +99,7 @@ struct atm_vcc { struct atm_dev *dev; /* device back pointer */ struct atm_qos qos; /* QOS */ struct atm_sap sap; /* SAP */ + void (*release_cb)(struct atm_vcc *vcc); /* release_sock callback */ void (*push)(struct atm_vcc *vcc,struct sk_buff *skb); void (*pop)(struct atm_vcc *vcc,struct sk_buff *skb); /* optional */ int (*push_oam)(struct atm_vcc *vcc,void *cell); @@ -106,6 +107,7 @@ struct atm_vcc { void *dev_data; /* per-device data */ void *proto_data; /* per-protocol data */ struct k_atm_aal_stats *stats; /* pointer to AAL stats group */ + struct module *owner; /* owner of ->push function */ /* SVC part --- may move later ------------------------------------- */ short itf; /* interface number */ struct sockaddr_atmsvc local; diff --git a/include/linux/atmel-ssc.h b/include/linux/atmel-ssc.h index 4eb31752e2b7..deb0ae58b99b 100644 --- a/include/linux/atmel-ssc.h +++ b/include/linux/atmel-ssc.h @@ -5,10 +5,16 @@ #include <linux/list.h> #include <linux/io.h> +struct atmel_ssc_platform_data { + int use_dma; +}; + struct ssc_device { struct list_head list; + resource_size_t phybase; void __iomem *regs; struct platform_device *pdev; + struct atmel_ssc_platform_data *pdata; struct clk *clk; int user; int irq; diff --git a/include/linux/balloon_compaction.h b/include/linux/balloon_compaction.h new file mode 100644 index 000000000000..f7f1d7169b11 --- /dev/null +++ b/include/linux/balloon_compaction.h @@ -0,0 +1,272 @@ +/* + * include/linux/balloon_compaction.h + * + * Common interface definitions for making balloon pages movable by compaction. + * + * Despite being perfectly possible to perform ballooned pages migration, they + * make a special corner case to compaction scans because balloon pages are not + * enlisted at any LRU list like the other pages we do compact / migrate. + * + * As the page isolation scanning step a compaction thread does is a lockless + * procedure (from a page standpoint), it might bring some racy situations while + * performing balloon page compaction. In order to sort out these racy scenarios + * and safely perform balloon's page compaction and migration we must, always, + * ensure following these three simple rules: + * + * i. when updating a balloon's page ->mapping element, strictly do it under + * the following lock order, independently of the far superior + * locking scheme (lru_lock, balloon_lock): + * +-page_lock(page); + * +--spin_lock_irq(&b_dev_info->pages_lock); + * ... page->mapping updates here ... + * + * ii. before isolating or dequeueing a balloon page from the balloon device + * pages list, the page reference counter must be raised by one and the + * extra refcount must be dropped when the page is enqueued back into + * the balloon device page list, thus a balloon page keeps its reference + * counter raised only while it is under our special handling; + * + * iii. after the lockless scan step have selected a potential balloon page for + * isolation, re-test the page->mapping flags and the page ref counter + * under the proper page lock, to ensure isolating a valid balloon page + * (not yet isolated, nor under release procedure) + * + * The functions provided by this interface are placed to help on coping with + * the aforementioned balloon page corner case, as well as to ensure the simple + * set of exposed rules are satisfied while we are dealing with balloon pages + * compaction / migration. + * + * Copyright (C) 2012, Red Hat, Inc. Rafael Aquini <aquini@redhat.com> + */ +#ifndef _LINUX_BALLOON_COMPACTION_H +#define _LINUX_BALLOON_COMPACTION_H +#include <linux/pagemap.h> +#include <linux/page-flags.h> +#include <linux/migrate.h> +#include <linux/gfp.h> +#include <linux/err.h> + +/* + * Balloon device information descriptor. + * This struct is used to allow the common balloon compaction interface + * procedures to find the proper balloon device holding memory pages they'll + * have to cope for page compaction / migration, as well as it serves the + * balloon driver as a page book-keeper for its registered balloon devices. + */ +struct balloon_dev_info { + void *balloon_device; /* balloon device descriptor */ + struct address_space *mapping; /* balloon special page->mapping */ + unsigned long isolated_pages; /* # of isolated pages for migration */ + spinlock_t pages_lock; /* Protection to pages list */ + struct list_head pages; /* Pages enqueued & handled to Host */ +}; + +extern struct page *balloon_page_enqueue(struct balloon_dev_info *b_dev_info); +extern struct page *balloon_page_dequeue(struct balloon_dev_info *b_dev_info); +extern struct balloon_dev_info *balloon_devinfo_alloc( + void *balloon_dev_descriptor); + +static inline void balloon_devinfo_free(struct balloon_dev_info *b_dev_info) +{ + kfree(b_dev_info); +} + +/* + * balloon_page_free - release a balloon page back to the page free lists + * @page: ballooned page to be set free + * + * This function must be used to properly set free an isolated/dequeued balloon + * page at the end of a sucessful page migration, or at the balloon driver's + * page release procedure. + */ +static inline void balloon_page_free(struct page *page) +{ + /* + * Balloon pages always get an extra refcount before being isolated + * and before being dequeued to help on sorting out fortuite colisions + * between a thread attempting to isolate and another thread attempting + * to release the very same balloon page. + * + * Before we handle the page back to Buddy, lets drop its extra refcnt. + */ + put_page(page); + __free_page(page); +} + +#ifdef CONFIG_BALLOON_COMPACTION +extern bool balloon_page_isolate(struct page *page); +extern void balloon_page_putback(struct page *page); +extern int balloon_page_migrate(struct page *newpage, + struct page *page, enum migrate_mode mode); +extern struct address_space +*balloon_mapping_alloc(struct balloon_dev_info *b_dev_info, + const struct address_space_operations *a_ops); + +static inline void balloon_mapping_free(struct address_space *balloon_mapping) +{ + kfree(balloon_mapping); +} + +/* + * page_flags_cleared - helper to perform balloon @page ->flags tests. + * + * As balloon pages are obtained from buddy and we do not play with page->flags + * at driver level (exception made when we get the page lock for compaction), + * we can safely identify a ballooned page by checking if the + * PAGE_FLAGS_CHECK_AT_PREP page->flags are all cleared. This approach also + * helps us skip ballooned pages that are locked for compaction or release, thus + * mitigating their racy check at balloon_page_movable() + */ +static inline bool page_flags_cleared(struct page *page) +{ + return !(page->flags & PAGE_FLAGS_CHECK_AT_PREP); +} + +/* + * __is_movable_balloon_page - helper to perform @page mapping->flags tests + */ +static inline bool __is_movable_balloon_page(struct page *page) +{ + struct address_space *mapping = page->mapping; + return mapping_balloon(mapping); +} + +/* + * balloon_page_movable - test page->mapping->flags to identify balloon pages + * that can be moved by compaction/migration. + * + * This function is used at core compaction's page isolation scheme, therefore + * most pages exposed to it are not enlisted as balloon pages and so, to avoid + * undesired side effects like racing against __free_pages(), we cannot afford + * holding the page locked while testing page->mapping->flags here. + * + * As we might return false positives in the case of a balloon page being just + * released under us, the page->mapping->flags need to be re-tested later, + * under the proper page lock, at the functions that will be coping with the + * balloon page case. + */ +static inline bool balloon_page_movable(struct page *page) +{ + /* + * Before dereferencing and testing mapping->flags, let's make sure + * this is not a page that uses ->mapping in a different way + */ + if (page_flags_cleared(page) && !page_mapped(page) && + page_count(page) == 1) + return __is_movable_balloon_page(page); + + return false; +} + +/* + * balloon_page_insert - insert a page into the balloon's page list and make + * the page->mapping assignment accordingly. + * @page : page to be assigned as a 'balloon page' + * @mapping : allocated special 'balloon_mapping' + * @head : balloon's device page list head + * + * Caller must ensure the page is locked and the spin_lock protecting balloon + * pages list is held before inserting a page into the balloon device. + */ +static inline void balloon_page_insert(struct page *page, + struct address_space *mapping, + struct list_head *head) +{ + page->mapping = mapping; + list_add(&page->lru, head); +} + +/* + * balloon_page_delete - delete a page from balloon's page list and clear + * the page->mapping assignement accordingly. + * @page : page to be released from balloon's page list + * + * Caller must ensure the page is locked and the spin_lock protecting balloon + * pages list is held before deleting a page from the balloon device. + */ +static inline void balloon_page_delete(struct page *page) +{ + page->mapping = NULL; + list_del(&page->lru); +} + +/* + * balloon_page_device - get the b_dev_info descriptor for the balloon device + * that enqueues the given page. + */ +static inline struct balloon_dev_info *balloon_page_device(struct page *page) +{ + struct address_space *mapping = page->mapping; + if (likely(mapping)) + return mapping->private_data; + + return NULL; +} + +static inline gfp_t balloon_mapping_gfp_mask(void) +{ + return GFP_HIGHUSER_MOVABLE; +} + +static inline bool balloon_compaction_check(void) +{ + return true; +} + +#else /* !CONFIG_BALLOON_COMPACTION */ + +static inline void *balloon_mapping_alloc(void *balloon_device, + const struct address_space_operations *a_ops) +{ + return ERR_PTR(-EOPNOTSUPP); +} + +static inline void balloon_mapping_free(struct address_space *balloon_mapping) +{ + return; +} + +static inline void balloon_page_insert(struct page *page, + struct address_space *mapping, + struct list_head *head) +{ + list_add(&page->lru, head); +} + +static inline void balloon_page_delete(struct page *page) +{ + list_del(&page->lru); +} + +static inline bool balloon_page_movable(struct page *page) +{ + return false; +} + +static inline bool balloon_page_isolate(struct page *page) +{ + return false; +} + +static inline void balloon_page_putback(struct page *page) +{ + return; +} + +static inline int balloon_page_migrate(struct page *newpage, + struct page *page, enum migrate_mode mode) +{ + return 0; +} + +static inline gfp_t balloon_mapping_gfp_mask(void) +{ + return GFP_HIGHUSER; +} + +static inline bool balloon_compaction_check(void) +{ + return false; +} +#endif /* CONFIG_BALLOON_COMPACTION */ +#endif /* _LINUX_BALLOON_COMPACTION_H */ diff --git a/include/linux/bcm47xx_wdt.h b/include/linux/bcm47xx_wdt.h new file mode 100644 index 000000000000..e5dfc256485b --- /dev/null +++ b/include/linux/bcm47xx_wdt.h @@ -0,0 +1,19 @@ +#ifndef LINUX_BCM47XX_WDT_H_ +#define LINUX_BCM47XX_WDT_H_ + +#include <linux/types.h> + + +struct bcm47xx_wdt { + u32 (*timer_set)(struct bcm47xx_wdt *, u32); + u32 (*timer_set_ms)(struct bcm47xx_wdt *, u32); + u32 max_timer_ms; + + void *driver_data; +}; + +static inline void *bcm47xx_wdt_get_drvdata(struct bcm47xx_wdt *wdt) +{ + return wdt->driver_data; +} +#endif /* LINUX_BCM47XX_WDT_H_ */ diff --git a/include/linux/bcma/bcma.h b/include/linux/bcma/bcma.h index 4180eb78d575..93b1e091b1e9 100644 --- a/include/linux/bcma/bcma.h +++ b/include/linux/bcma/bcma.h @@ -157,6 +157,7 @@ struct bcma_host_ops { /* Chip IDs of SoCs */ #define BCMA_CHIP_ID_BCM4706 0x5300 +#define BCMA_PKG_ID_BCM4706L 1 #define BCMA_CHIP_ID_BCM4716 0x4716 #define BCMA_PKG_ID_BCM4716 8 #define BCMA_PKG_ID_BCM4717 9 @@ -166,7 +167,11 @@ struct bcma_host_ops { #define BCMA_CHIP_ID_BCM4749 0x4749 #define BCMA_CHIP_ID_BCM5356 0x5356 #define BCMA_CHIP_ID_BCM5357 0x5357 +#define BCMA_PKG_ID_BCM5358 9 +#define BCMA_PKG_ID_BCM47186 10 +#define BCMA_PKG_ID_BCM5357 11 #define BCMA_CHIP_ID_BCM53572 53572 +#define BCMA_PKG_ID_BCM47188 9 struct bcma_device { struct bcma_bus *bus; @@ -251,7 +256,7 @@ struct bcma_bus { u8 num; struct bcma_drv_cc drv_cc; - struct bcma_drv_pci drv_pci; + struct bcma_drv_pci drv_pci[2]; struct bcma_drv_mips drv_mips; struct bcma_drv_gmac_cmn drv_gmac_cmn; diff --git a/include/linux/bcma/bcma_driver_chipcommon.h b/include/linux/bcma/bcma_driver_chipcommon.h index 1cf1749440ac..9a0e3fa3ca95 100644 --- a/include/linux/bcma/bcma_driver_chipcommon.h +++ b/include/linux/bcma/bcma_driver_chipcommon.h @@ -1,6 +1,9 @@ #ifndef LINUX_BCMA_DRIVER_CC_H_ #define LINUX_BCMA_DRIVER_CC_H_ +#include <linux/platform_device.h> +#include <linux/gpio.h> + /** ChipCommon core registers. **/ #define BCMA_CC_ID 0x0000 #define BCMA_CC_ID_ID 0x0000FFFF @@ -510,6 +513,7 @@ struct bcma_chipcommon_pmu { #ifdef CONFIG_BCMA_DRIVER_MIPS struct bcma_pflash { + bool present; u8 buswidth; u32 window; u32 window_size; @@ -532,6 +536,7 @@ struct mtd_info; struct bcma_nflash { bool present; + bool boot; /* This is the flash the SoC boots from */ struct mtd_info *mtd; }; @@ -552,6 +557,7 @@ struct bcma_drv_cc { u32 capabilities; u32 capabilities_ext; u8 setup_done:1; + u8 early_setup_done:1; /* Fast Powerup Delay constant */ u16 fast_pwrup_delay; struct bcma_chipcommon_pmu pmu; @@ -567,6 +573,14 @@ struct bcma_drv_cc { int nr_serial_ports; struct bcma_serial_port serial_ports[4]; #endif /* CONFIG_BCMA_DRIVER_MIPS */ + u32 ticks_per_ms; + struct platform_device *watchdog; + + /* Lock for GPIO register access. */ + spinlock_t gpio_lock; +#ifdef CONFIG_BCMA_DRIVER_GPIO + struct gpio_chip gpio; +#endif }; /* Register access */ @@ -583,14 +597,14 @@ struct bcma_drv_cc { bcma_cc_write32(cc, offset, (bcma_cc_read32(cc, offset) & (mask)) | (set)) extern void bcma_core_chipcommon_init(struct bcma_drv_cc *cc); +extern void bcma_core_chipcommon_early_init(struct bcma_drv_cc *cc); extern void bcma_chipco_suspend(struct bcma_drv_cc *cc); extern void bcma_chipco_resume(struct bcma_drv_cc *cc); void bcma_chipco_bcm4331_ext_pa_lines_ctl(struct bcma_drv_cc *cc, bool enable); -extern void bcma_chipco_watchdog_timer_set(struct bcma_drv_cc *cc, - u32 ticks); +extern u32 bcma_chipco_watchdog_timer_set(struct bcma_drv_cc *cc, u32 ticks); void bcma_chipco_irq_mask(struct bcma_drv_cc *cc, u32 mask, u32 value); @@ -603,9 +617,12 @@ u32 bcma_chipco_gpio_outen(struct bcma_drv_cc *cc, u32 mask, u32 value); u32 bcma_chipco_gpio_control(struct bcma_drv_cc *cc, u32 mask, u32 value); u32 bcma_chipco_gpio_intmask(struct bcma_drv_cc *cc, u32 mask, u32 value); u32 bcma_chipco_gpio_polarity(struct bcma_drv_cc *cc, u32 mask, u32 value); +u32 bcma_chipco_gpio_pullup(struct bcma_drv_cc *cc, u32 mask, u32 value); +u32 bcma_chipco_gpio_pulldown(struct bcma_drv_cc *cc, u32 mask, u32 value); /* PMU support */ extern void bcma_pmu_init(struct bcma_drv_cc *cc); +extern void bcma_pmu_early_init(struct bcma_drv_cc *cc); extern void bcma_chipco_pll_write(struct bcma_drv_cc *cc, u32 offset, u32 value); diff --git a/include/linux/bcma/bcma_driver_mips.h b/include/linux/bcma/bcma_driver_mips.h index c0043645cdcb..0baf8a56b794 100644 --- a/include/linux/bcma/bcma_driver_mips.h +++ b/include/linux/bcma/bcma_driver_mips.h @@ -35,13 +35,16 @@ struct bcma_device; struct bcma_drv_mips { struct bcma_device *core; u8 setup_done:1; + u8 early_setup_done:1; unsigned int assigned_irqs; }; #ifdef CONFIG_BCMA_DRIVER_MIPS extern void bcma_core_mips_init(struct bcma_drv_mips *mcore); +extern void bcma_core_mips_early_init(struct bcma_drv_mips *mcore); #else static inline void bcma_core_mips_init(struct bcma_drv_mips *mcore) { } +static inline void bcma_core_mips_early_init(struct bcma_drv_mips *mcore) { } #endif extern u32 bcma_cpu_clock(struct bcma_drv_mips *mcore); diff --git a/include/linux/bcma/bcma_regs.h b/include/linux/bcma/bcma_regs.h index 6c9cb93ae3de..7e8104bb7a7e 100644 --- a/include/linux/bcma/bcma_regs.h +++ b/include/linux/bcma/bcma_regs.h @@ -85,6 +85,9 @@ * (2 ZettaBytes), high 32 bits */ -#define BCMA_SFLASH 0x1c000000 +#define BCMA_SOC_FLASH1 0x1fc00000 /* MIPS Flash Region 1 */ +#define BCMA_SOC_FLASH1_SZ 0x00400000 /* MIPS Size of Flash Region 1 */ +#define BCMA_SOC_FLASH2 0x1c000000 /* Flash Region 2 (region 1 shadowed here) */ +#define BCMA_SOC_FLASH2_SZ 0x02000000 /* Size of Flash Region 2 */ #endif /* LINUX_BCMA_REGS_H_ */ diff --git a/include/linux/binfmts.h b/include/linux/binfmts.h index cfcc6bfcaec0..2630c9b41a86 100644 --- a/include/linux/binfmts.h +++ b/include/linux/binfmts.h @@ -72,7 +72,7 @@ struct coredump_params { struct linux_binfmt { struct list_head lh; struct module *module; - int (*load_binary)(struct linux_binprm *, struct pt_regs * regs); + int (*load_binary)(struct linux_binprm *); int (*load_shlib)(struct file *); int (*core_dump)(struct coredump_params *cprm); unsigned long min_coredump; /* minimal dump size */ @@ -95,7 +95,7 @@ extern void unregister_binfmt(struct linux_binfmt *); extern int prepare_binprm(struct linux_binprm *); extern int __must_check remove_arg_zero(struct linux_binprm *); -extern int search_binary_handler(struct linux_binprm *, struct pt_regs *); +extern int search_binary_handler(struct linux_binprm *); extern int flush_old_exec(struct linux_binprm * bprm); extern void setup_new_exec(struct linux_binprm * bprm); extern void would_dump(struct linux_binprm *, struct file *); diff --git a/include/linux/bootmem.h b/include/linux/bootmem.h index 6d6795d46a75..3f778c27f825 100644 --- a/include/linux/bootmem.h +++ b/include/linux/bootmem.h @@ -51,8 +51,8 @@ extern unsigned long free_all_bootmem(void); extern void free_bootmem_node(pg_data_t *pgdat, unsigned long addr, unsigned long size); -extern void free_bootmem(unsigned long addr, unsigned long size); -extern void free_bootmem_late(unsigned long addr, unsigned long size); +extern void free_bootmem(unsigned long physaddr, unsigned long size); +extern void free_bootmem_late(unsigned long physaddr, unsigned long size); /* * Flags for reserve_bootmem (also if CONFIG_HAVE_ARCH_BOOTMEM_NODE, @@ -137,9 +137,6 @@ extern void *__alloc_bootmem_low_node(pg_data_t *pgdat, #define alloc_bootmem_low_pages_node(pgdat, x) \ __alloc_bootmem_low_node(pgdat, x, PAGE_SIZE, 0) -extern int reserve_bootmem_generic(unsigned long addr, unsigned long size, - int flags); - #ifdef CONFIG_HAVE_ARCH_ALLOC_REMAP extern void *alloc_remap(int nid, unsigned long size); #else diff --git a/include/linux/bug.h b/include/linux/bug.h index aaac4bba6f5c..b1cf40de847e 100644 --- a/include/linux/bug.h +++ b/include/linux/bug.h @@ -15,6 +15,7 @@ struct pt_regs; #define BUILD_BUG_ON_NOT_POWER_OF_2(n) #define BUILD_BUG_ON_ZERO(e) (0) #define BUILD_BUG_ON_NULL(e) ((void*)0) +#define BUILD_BUG_ON_INVALID(e) (0) #define BUILD_BUG_ON(condition) #define BUILD_BUG() (0) #else /* __CHECKER__ */ diff --git a/include/linux/cgroup.h b/include/linux/cgroup.h index f8a030ced0c7..7d73905dcba2 100644 --- a/include/linux/cgroup.h +++ b/include/linux/cgroup.h @@ -12,6 +12,7 @@ #include <linux/cpumask.h> #include <linux/nodemask.h> #include <linux/rcupdate.h> +#include <linux/rculist.h> #include <linux/cgroupstats.h> #include <linux/prio_heap.h> #include <linux/rwsem.h> @@ -34,7 +35,6 @@ extern int cgroup_lock_is_held(void); extern bool cgroup_lock_live_group(struct cgroup *cgrp); extern void cgroup_unlock(void); extern void cgroup_fork(struct task_struct *p); -extern void cgroup_fork_callbacks(struct task_struct *p); extern void cgroup_post_fork(struct task_struct *p); extern void cgroup_exit(struct task_struct *p, int run_callbacks); extern int cgroupstats_build(struct cgroupstats *stats, @@ -66,7 +66,7 @@ struct cgroup_subsys_state { /* * State maintained by the cgroup system to allow subsystems * to be "busy". Should be accessed via css_get(), - * css_tryget() and and css_put(). + * css_tryget() and css_put(). */ atomic_t refcnt; @@ -81,9 +81,8 @@ struct cgroup_subsys_state { /* bits in struct cgroup_subsys_state flags field */ enum { - CSS_ROOT, /* This CSS is the root of the subsystem */ - CSS_REMOVED, /* This CSS is dead */ - CSS_CLEAR_CSS_REFS, /* @ss->__DEPRECATED_clear_css_refs */ + CSS_ROOT = (1 << 0), /* this CSS is the root of the subsystem */ + CSS_ONLINE = (1 << 1), /* between ->css_online() and ->css_offline() */ }; /* Caller must verify that the css is not for root cgroup */ @@ -102,15 +101,10 @@ static inline void __css_get(struct cgroup_subsys_state *css, int count) static inline void css_get(struct cgroup_subsys_state *css) { /* We don't need to reference count the root state */ - if (!test_bit(CSS_ROOT, &css->flags)) + if (!(css->flags & CSS_ROOT)) __css_get(css, 1); } -static inline bool css_is_removed(struct cgroup_subsys_state *css) -{ - return test_bit(CSS_REMOVED, &css->flags); -} - /* * Call css_tryget() to take a reference on a css if your existing * (known-valid) reference isn't already ref-counted. Returns false if @@ -120,7 +114,7 @@ static inline bool css_is_removed(struct cgroup_subsys_state *css) extern bool __css_tryget(struct cgroup_subsys_state *css); static inline bool css_tryget(struct cgroup_subsys_state *css) { - if (test_bit(CSS_ROOT, &css->flags)) + if (css->flags & CSS_ROOT) return true; return __css_tryget(css); } @@ -133,7 +127,7 @@ static inline bool css_tryget(struct cgroup_subsys_state *css) extern void __css_put(struct cgroup_subsys_state *css); static inline void css_put(struct cgroup_subsys_state *css) { - if (!test_bit(CSS_ROOT, &css->flags)) + if (!(css->flags & CSS_ROOT)) __css_put(css); } @@ -149,13 +143,11 @@ enum { /* Control Group requires release notifications to userspace */ CGRP_NOTIFY_ON_RELEASE, /* - * A thread in rmdir() is wating for this cgroup. - */ - CGRP_WAIT_ON_RMDIR, - /* - * Clone cgroup values when creating a new child cgroup + * Clone the parent's configuration when creating a new child + * cpuset cgroup. For historical reasons, this option can be + * specified at mount time and thus is implemented here. */ - CGRP_CLONE_CHILDREN, + CGRP_CPUSET_CLONE_CHILDREN, }; struct cgroup { @@ -167,6 +159,8 @@ struct cgroup { */ atomic_t count; + int id; /* ida allocated in-hierarchy ID */ + /* * We link our 'sibling' struct into our parent's 'children'. * Our children link their 'sibling' into our 'children'. @@ -176,7 +170,7 @@ struct cgroup { struct list_head files; /* my files */ struct cgroup *parent; /* my parent */ - struct dentry __rcu *dentry; /* cgroup fs entry, RCU protected */ + struct dentry *dentry; /* cgroup fs entry, RCU protected */ /* Private pointers for each registered subsystem */ struct cgroup_subsys_state *subsys[CGROUP_SUBSYS_COUNT]; @@ -282,7 +276,7 @@ struct cgroup_map_cb { /* cftype->flags */ #define CFTYPE_ONLY_ON_ROOT (1U << 0) /* only create on root cg */ -#define CFTYPE_NOT_ON_ROOT (1U << 1) /* don't create onp root cg */ +#define CFTYPE_NOT_ON_ROOT (1U << 1) /* don't create on root cg */ #define MAX_CFTYPE_NAME 64 @@ -422,23 +416,6 @@ int cgroup_task_count(const struct cgroup *cgrp); int cgroup_is_descendant(const struct cgroup *cgrp, struct task_struct *task); /* - * When the subsys has to access css and may add permanent refcnt to css, - * it should take care of racy conditions with rmdir(). Following set of - * functions, is for stop/restart rmdir if necessary. - * Because these will call css_get/put, "css" should be alive css. - * - * cgroup_exclude_rmdir(); - * ...do some jobs which may access arbitrary empty cgroup - * cgroup_release_and_wakeup_rmdir(); - * - * When someone removes a cgroup while cgroup_exclude_rmdir() holds it, - * it sleeps and cgroup_release_and_wakeup_rmdir() will wake him up. - */ - -void cgroup_exclude_rmdir(struct cgroup_subsys_state *css); -void cgroup_release_and_wakeup_rmdir(struct cgroup_subsys_state *css); - -/* * Control Group taskset, used to pass around set of tasks to cgroup_subsys * methods. */ @@ -466,16 +443,17 @@ int cgroup_taskset_size(struct cgroup_taskset *tset); */ struct cgroup_subsys { - struct cgroup_subsys_state *(*create)(struct cgroup *cgrp); - int (*pre_destroy)(struct cgroup *cgrp); - void (*destroy)(struct cgroup *cgrp); + struct cgroup_subsys_state *(*css_alloc)(struct cgroup *cgrp); + int (*css_online)(struct cgroup *cgrp); + void (*css_offline)(struct cgroup *cgrp); + void (*css_free)(struct cgroup *cgrp); + int (*can_attach)(struct cgroup *cgrp, struct cgroup_taskset *tset); void (*cancel_attach)(struct cgroup *cgrp, struct cgroup_taskset *tset); void (*attach)(struct cgroup *cgrp, struct cgroup_taskset *tset); void (*fork)(struct task_struct *task); void (*exit)(struct cgroup *cgrp, struct cgroup *old_cgrp, struct task_struct *task); - void (*post_clone)(struct cgroup *cgrp); void (*bind)(struct cgroup *root); int subsys_id; @@ -489,17 +467,6 @@ struct cgroup_subsys { bool use_id; /* - * If %true, cgroup removal will try to clear css refs by retrying - * ss->pre_destroy() until there's no css ref left. This behavior - * is strictly for backward compatibility and will be removed as - * soon as the current user (memcg) is updated. - * - * If %false, ss->pre_destroy() can't fail and cgroup removal won't - * wait for css refs to drop to zero before proceeding. - */ - bool __DEPRECATED_clear_css_refs; - - /* * If %false, this subsystem is properly hierarchical - * configuration, resource accounting and restriction on a parent * cgroup cover those of its children. If %true, hierarchy support @@ -572,6 +539,100 @@ static inline struct cgroup* task_cgroup(struct task_struct *task, return task_subsys_state(task, subsys_id)->cgroup; } +/** + * cgroup_for_each_child - iterate through children of a cgroup + * @pos: the cgroup * to use as the loop cursor + * @cgroup: cgroup whose children to walk + * + * Walk @cgroup's children. Must be called under rcu_read_lock(). A child + * cgroup which hasn't finished ->css_online() or already has finished + * ->css_offline() may show up during traversal and it's each subsystem's + * responsibility to verify that each @pos is alive. + * + * If a subsystem synchronizes against the parent in its ->css_online() and + * before starting iterating, a cgroup which finished ->css_online() is + * guaranteed to be visible in the future iterations. + */ +#define cgroup_for_each_child(pos, cgroup) \ + list_for_each_entry_rcu(pos, &(cgroup)->children, sibling) + +struct cgroup *cgroup_next_descendant_pre(struct cgroup *pos, + struct cgroup *cgroup); + +/** + * cgroup_for_each_descendant_pre - pre-order walk of a cgroup's descendants + * @pos: the cgroup * to use as the loop cursor + * @cgroup: cgroup whose descendants to walk + * + * Walk @cgroup's descendants. Must be called under rcu_read_lock(). A + * descendant cgroup which hasn't finished ->css_online() or already has + * finished ->css_offline() may show up during traversal and it's each + * subsystem's responsibility to verify that each @pos is alive. + * + * If a subsystem synchronizes against the parent in its ->css_online() and + * before starting iterating, and synchronizes against @pos on each + * iteration, any descendant cgroup which finished ->css_offline() is + * guaranteed to be visible in the future iterations. + * + * In other words, the following guarantees that a descendant can't escape + * state updates of its ancestors. + * + * my_online(@cgrp) + * { + * Lock @cgrp->parent and @cgrp; + * Inherit state from @cgrp->parent; + * Unlock both. + * } + * + * my_update_state(@cgrp) + * { + * Lock @cgrp; + * Update @cgrp's state; + * Unlock @cgrp; + * + * cgroup_for_each_descendant_pre(@pos, @cgrp) { + * Lock @pos; + * Verify @pos is alive and inherit state from @pos->parent; + * Unlock @pos; + * } + * } + * + * As long as the inheriting step, including checking the parent state, is + * enclosed inside @pos locking, double-locking the parent isn't necessary + * while inheriting. The state update to the parent is guaranteed to be + * visible by walking order and, as long as inheriting operations to the + * same @pos are atomic to each other, multiple updates racing each other + * still result in the correct state. It's guaranateed that at least one + * inheritance happens for any cgroup after the latest update to its + * parent. + * + * If checking parent's state requires locking the parent, each inheriting + * iteration should lock and unlock both @pos->parent and @pos. + * + * Alternatively, a subsystem may choose to use a single global lock to + * synchronize ->css_online() and ->css_offline() against tree-walking + * operations. + */ +#define cgroup_for_each_descendant_pre(pos, cgroup) \ + for (pos = cgroup_next_descendant_pre(NULL, (cgroup)); (pos); \ + pos = cgroup_next_descendant_pre((pos), (cgroup))) + +struct cgroup *cgroup_next_descendant_post(struct cgroup *pos, + struct cgroup *cgroup); + +/** + * cgroup_for_each_descendant_post - post-order walk of a cgroup's descendants + * @pos: the cgroup * to use as the loop cursor + * @cgroup: cgroup whose descendants to walk + * + * Similar to cgroup_for_each_descendant_pre() but performs post-order + * traversal instead. Note that the walk visibility guarantee described in + * pre-order walk doesn't apply the same to post-order walks. + */ +#define cgroup_for_each_descendant_post(pos, cgroup) \ + for (pos = cgroup_next_descendant_post(NULL, (cgroup)); (pos); \ + pos = cgroup_next_descendant_post((pos), (cgroup))) + /* A cgroup_iter should be treated as an opaque object */ struct cgroup_iter { struct list_head *cg_link; diff --git a/include/linux/clk-provider.h b/include/linux/clk-provider.h index f9f5e9eeb9dd..4989b8a7bed1 100644 --- a/include/linux/clk-provider.h +++ b/include/linux/clk-provider.h @@ -53,9 +53,18 @@ struct clk_hw; * @disable: Disable the clock atomically. Called with enable_lock held. * This function must not sleep. * - * @recalc_rate Recalculate the rate of this clock, by quering hardware. The + * @is_enabled: Queries the hardware to determine if the clock is enabled. + * This function must not sleep. Optional, if this op is not + * set then the enable count will be used. + * + * @disable_unused: Disable the clock atomically. Only called from + * clk_disable_unused for gate clocks with special needs. + * Called with enable_lock held. This function must not + * sleep. + * + * @recalc_rate Recalculate the rate of this clock, by querying hardware. The * parent rate is an input parameter. It is up to the caller to - * insure that the prepare_mutex is held across this call. + * ensure that the prepare_mutex is held across this call. * Returns the calculated rate. Optional, but recommended - if * this op is not set then clock rate will be initialized to 0. * @@ -89,7 +98,7 @@ struct clk_hw; * implementations to split any work between atomic (enable) and sleepable * (prepare) contexts. If enabling a clock requires code that might sleep, * this must be done in clk_prepare. Clock enable code that will never be - * called in a sleepable context may be implement in clk_enable. + * called in a sleepable context may be implemented in clk_enable. * * Typically, drivers will call clk_prepare when a clock may be needed later * (eg. when a device is opened), and clk_enable when the clock is actually @@ -102,6 +111,7 @@ struct clk_ops { int (*enable)(struct clk_hw *hw); void (*disable)(struct clk_hw *hw); int (*is_enabled)(struct clk_hw *hw); + void (*disable_unused)(struct clk_hw *hw); unsigned long (*recalc_rate)(struct clk_hw *hw, unsigned long parent_rate); long (*round_rate)(struct clk_hw *hw, unsigned long, @@ -327,19 +337,21 @@ struct clk *clk_register_fixed_factor(struct device *dev, const char *name, * error code; drivers must test for an error code after calling clk_register. */ struct clk *clk_register(struct device *dev, struct clk_hw *hw); +struct clk *devm_clk_register(struct device *dev, struct clk_hw *hw); void clk_unregister(struct clk *clk); +void devm_clk_unregister(struct device *dev, struct clk *clk); /* helper functions */ const char *__clk_get_name(struct clk *clk); struct clk_hw *__clk_get_hw(struct clk *clk); u8 __clk_get_num_parents(struct clk *clk); struct clk *__clk_get_parent(struct clk *clk); -int __clk_get_enable_count(struct clk *clk); -int __clk_get_prepare_count(struct clk *clk); +unsigned int __clk_get_enable_count(struct clk *clk); +unsigned int __clk_get_prepare_count(struct clk *clk); unsigned long __clk_get_rate(struct clk *clk); unsigned long __clk_get_flags(struct clk *clk); -int __clk_is_enabled(struct clk *clk); +bool __clk_is_enabled(struct clk *clk); struct clk *__clk_lookup(const char *name); /* diff --git a/include/linux/clk/mvebu.h b/include/linux/clk/mvebu.h new file mode 100644 index 000000000000..8c4ae713b063 --- /dev/null +++ b/include/linux/clk/mvebu.h @@ -0,0 +1,22 @@ +/* + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#ifndef __CLK_MVEBU_H_ +#define __CLK_MVEBU_H_ + +void __init mvebu_clocks_init(void); + +#endif diff --git a/include/linux/clk/sunxi.h b/include/linux/clk/sunxi.h new file mode 100644 index 000000000000..e074fdd5a236 --- /dev/null +++ b/include/linux/clk/sunxi.h @@ -0,0 +1,22 @@ +/* + * Copyright 2012 Maxime Ripard + * + * Maxime Ripard <maxime.ripard@free-electrons.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#ifndef __LINUX_CLK_SUNXI_H_ +#define __LINUX_CLK_SUNXI_H_ + +void __init sunxi_init_clocks(void); + +#endif diff --git a/include/linux/clk/zynq.h b/include/linux/clk/zynq.h new file mode 100644 index 000000000000..56be7cd9aa8b --- /dev/null +++ b/include/linux/clk/zynq.h @@ -0,0 +1,24 @@ +/* + * Copyright (C) 2012 National Instruments + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#ifndef __LINUX_CLK_ZYNQ_H_ +#define __LINUX_CLK_ZYNQ_H_ + +void __init xilinx_zynq_clocks_init(void __iomem *slcr); + +#endif diff --git a/include/linux/compat.h b/include/linux/compat.h index d0ced1011f2f..784ebfe63c48 100644 --- a/include/linux/compat.h +++ b/include/linux/compat.h @@ -284,12 +284,8 @@ asmlinkage ssize_t compat_sys_pwritev(unsigned long fd, const struct compat_iovec __user *vec, unsigned long vlen, u32 pos_low, u32 pos_high); -int compat_do_execve(const char *filename, const compat_uptr_t __user *argv, - const compat_uptr_t __user *envp, struct pt_regs *regs); -#ifdef __ARCH_WANT_SYS_EXECVE asmlinkage long compat_sys_execve(const char __user *filename, const compat_uptr_t __user *argv, const compat_uptr_t __user *envp); -#endif asmlinkage long compat_sys_select(int n, compat_ulong_t __user *inp, compat_ulong_t __user *outp, compat_ulong_t __user *exp, diff --git a/include/linux/context_tracking.h b/include/linux/context_tracking.h new file mode 100644 index 000000000000..e24339ccb7f0 --- /dev/null +++ b/include/linux/context_tracking.h @@ -0,0 +1,18 @@ +#ifndef _LINUX_CONTEXT_TRACKING_H +#define _LINUX_CONTEXT_TRACKING_H + +#ifdef CONFIG_CONTEXT_TRACKING +#include <linux/sched.h> + +extern void user_enter(void); +extern void user_exit(void); +extern void context_tracking_task_switch(struct task_struct *prev, + struct task_struct *next); +#else +static inline void user_enter(void) { } +static inline void user_exit(void) { } +static inline void context_tracking_task_switch(struct task_struct *prev, + struct task_struct *next) { } +#endif /* !CONFIG_CONTEXT_TRACKING */ + +#endif diff --git a/include/linux/coredump.h b/include/linux/coredump.h index 1d7399314a89..a98f1ca60407 100644 --- a/include/linux/coredump.h +++ b/include/linux/coredump.h @@ -13,9 +13,9 @@ extern int dump_write(struct file *file, const void *addr, int nr); extern int dump_seek(struct file *file, loff_t off); #ifdef CONFIG_COREDUMP -extern void do_coredump(siginfo_t *siginfo, struct pt_regs *regs); +extern void do_coredump(siginfo_t *siginfo); #else -static inline void do_coredump(siginfo_t *siginfo, struct pt_regs *regs) {} +static inline void do_coredump(siginfo_t *siginfo) {} #endif #endif /* _LINUX_COREDUMP_H */ diff --git a/include/linux/cpu_cooling.h b/include/linux/cpu_cooling.h index 851530128e65..40b4ef54cc7d 100644 --- a/include/linux/cpu_cooling.h +++ b/include/linux/cpu_cooling.h @@ -29,13 +29,13 @@ #define CPUFREQ_COOLING_START 0 #define CPUFREQ_COOLING_STOP 1 -#ifdef CONFIG_CPU_THERMAL +#if defined(CONFIG_CPU_THERMAL) || defined(CONFIG_CPU_THERMAL_MODULE) /** * cpufreq_cooling_register - function to create cpufreq cooling device. * @clip_cpus: cpumask of cpus where the frequency constraints will happen */ struct thermal_cooling_device *cpufreq_cooling_register( - struct cpumask *clip_cpus); + const struct cpumask *clip_cpus); /** * cpufreq_cooling_unregister - function to remove cpufreq cooling device. @@ -44,7 +44,7 @@ struct thermal_cooling_device *cpufreq_cooling_register( void cpufreq_cooling_unregister(struct thermal_cooling_device *cdev); #else /* !CONFIG_CPU_THERMAL */ static inline struct thermal_cooling_device *cpufreq_cooling_register( - struct cpumask *clip_cpus) + const struct cpumask *clip_cpus) { return NULL; } diff --git a/include/linux/cpufreq.h b/include/linux/cpufreq.h index b60f6ba01d0c..a55b88eaf96a 100644 --- a/include/linux/cpufreq.h +++ b/include/linux/cpufreq.h @@ -11,6 +11,7 @@ #ifndef _LINUX_CPUFREQ_H #define _LINUX_CPUFREQ_H +#include <asm/cputime.h> #include <linux/mutex.h> #include <linux/notifier.h> #include <linux/threads.h> @@ -22,6 +23,8 @@ #include <asm/div64.h> #define CPUFREQ_NAME_LEN 16 +/* Print length for names. Extra 1 space for accomodating '\n' in prints */ +#define CPUFREQ_NAME_PLEN (CPUFREQ_NAME_LEN + 1) /********************************************************************* @@ -404,6 +407,4 @@ void cpufreq_frequency_table_get_attr(struct cpufreq_frequency_table *table, unsigned int cpu); void cpufreq_frequency_table_put_attr(unsigned int cpu); - - #endif /* _LINUX_CPUFREQ_H */ diff --git a/include/linux/cpuidle.h b/include/linux/cpuidle.h index 279b1eaa8b73..3711b34dc4f9 100644 --- a/include/linux/cpuidle.h +++ b/include/linux/cpuidle.h @@ -82,13 +82,6 @@ cpuidle_set_statedata(struct cpuidle_state_usage *st_usage, void *data) st_usage->driver_data = data; } -struct cpuidle_state_kobj { - struct cpuidle_state *state; - struct cpuidle_state_usage *state_usage; - struct completion kobj_unregister; - struct kobject kobj; -}; - struct cpuidle_device { unsigned int registered:1; unsigned int enabled:1; @@ -98,7 +91,7 @@ struct cpuidle_device { int state_count; struct cpuidle_state_usage states_usage[CPUIDLE_STATE_MAX]; struct cpuidle_state_kobj *kobjs[CPUIDLE_STATE_MAX]; - + struct cpuidle_driver_kobj *kobj_driver; struct list_head device_list; struct kobject kobj; struct completion kobj_unregister; @@ -131,6 +124,7 @@ static inline int cpuidle_get_last_residency(struct cpuidle_device *dev) struct cpuidle_driver { const char *name; struct module *owner; + int refcnt; unsigned int power_specified:1; /* set to 1 to use the core cpuidle time keeping (for all states). */ @@ -163,6 +157,10 @@ extern int cpuidle_wrap_enter(struct cpuidle_device *dev, struct cpuidle_driver *drv, int index)); extern int cpuidle_play_dead(void); +extern struct cpuidle_driver *cpuidle_get_cpu_driver(struct cpuidle_device *dev); +extern int cpuidle_register_cpu_driver(struct cpuidle_driver *drv, int cpu); +extern void cpuidle_unregister_cpu_driver(struct cpuidle_driver *drv, int cpu); + #else static inline void disable_cpuidle(void) { } static inline int cpuidle_idle_call(void) { return -ENODEV; } @@ -189,7 +187,6 @@ static inline int cpuidle_wrap_enter(struct cpuidle_device *dev, struct cpuidle_driver *drv, int index)) { return -ENODEV; } static inline int cpuidle_play_dead(void) {return -ENODEV; } - #endif #ifdef CONFIG_ARCH_NEEDS_CPU_IDLE_COUPLED diff --git a/include/linux/cpuset.h b/include/linux/cpuset.h index 838320fc3d1d..8c8a60d29407 100644 --- a/include/linux/cpuset.h +++ b/include/linux/cpuset.h @@ -144,7 +144,7 @@ static inline nodemask_t cpuset_mems_allowed(struct task_struct *p) return node_possible_map; } -#define cpuset_current_mems_allowed (node_states[N_HIGH_MEMORY]) +#define cpuset_current_mems_allowed (node_states[N_MEMORY]) static inline void cpuset_init_current_mems_allowed(void) {} static inline int cpuset_nodemask_valid_mems_allowed(nodemask_t *nodemask) diff --git a/include/linux/devfreq.h b/include/linux/devfreq.h index 281c72a3b9d5..e83ef39b3bea 100644 --- a/include/linux/devfreq.h +++ b/include/linux/devfreq.h @@ -25,12 +25,12 @@ struct devfreq; * struct devfreq_dev_status - Data given from devfreq user device to * governors. Represents the performance * statistics. - * @total_time The total time represented by this instance of + * @total_time: The total time represented by this instance of * devfreq_dev_status - * @busy_time The time that the device was working among the + * @busy_time: The time that the device was working among the * total_time. - * @current_frequency The operating frequency. - * @private_data An entry not specified by the devfreq framework. + * @current_frequency: The operating frequency. + * @private_data: An entry not specified by the devfreq framework. * A device and a specific governor may have their * own protocol with private_data. However, because * this is governor-specific, a governor using this @@ -54,23 +54,27 @@ struct devfreq_dev_status { /** * struct devfreq_dev_profile - Devfreq's user device profile - * @initial_freq The operating frequency when devfreq_add_device() is + * @initial_freq: The operating frequency when devfreq_add_device() is * called. - * @polling_ms The polling interval in ms. 0 disables polling. - * @target The device should set its operating frequency at + * @polling_ms: The polling interval in ms. 0 disables polling. + * @target: The device should set its operating frequency at * freq or lowest-upper-than-freq value. If freq is * higher than any operable frequency, set maximum. * Before returning, target function should set * freq at the current frequency. * The "flags" parameter's possible values are * explained above with "DEVFREQ_FLAG_*" macros. - * @get_dev_status The device should provide the current performance + * @get_dev_status: The device should provide the current performance * status to devfreq, which is used by governors. - * @exit An optional callback that is called when devfreq + * @get_cur_freq: The device should provide the current frequency + * at which it is operating. + * @exit: An optional callback that is called when devfreq * is removing the devfreq object due to error or * from devfreq_remove_device() call. If the user * has registered devfreq->nb at a notifier-head, * this is the time to unregister it. + * @freq_table: Optional list of frequencies to support statistics. + * @max_state: The size of freq_table. */ struct devfreq_dev_profile { unsigned long initial_freq; @@ -79,63 +83,63 @@ struct devfreq_dev_profile { int (*target)(struct device *dev, unsigned long *freq, u32 flags); int (*get_dev_status)(struct device *dev, struct devfreq_dev_status *stat); + int (*get_cur_freq)(struct device *dev, unsigned long *freq); void (*exit)(struct device *dev); + + unsigned int *freq_table; + unsigned int max_state; }; /** * struct devfreq_governor - Devfreq policy governor - * @name Governor's name - * @get_target_freq Returns desired operating frequency for the device. + * @node: list node - contains registered devfreq governors + * @name: Governor's name + * @get_target_freq: Returns desired operating frequency for the device. * Basically, get_target_freq will run * devfreq_dev_profile.get_dev_status() to get the * status of the device (load = busy_time / total_time). * If no_central_polling is set, this callback is called * only with update_devfreq() notified by OPP. - * @init Called when the devfreq is being attached to a device - * @exit Called when the devfreq is being removed from a - * device. Governor should stop any internal routines - * before return because related data may be - * freed after exit(). - * @no_central_polling Do not use devfreq's central polling mechanism. - * When this is set, devfreq will not call - * get_target_freq with devfreq_monitor(). However, - * devfreq will call get_target_freq with - * devfreq_update() notified by OPP framework. + * @event_handler: Callback for devfreq core framework to notify events + * to governors. Events include per device governor + * init and exit, opp changes out of devfreq, suspend + * and resume of per device devfreq during device idle. * * Note that the callbacks are called with devfreq->lock locked by devfreq. */ struct devfreq_governor { + struct list_head node; + const char name[DEVFREQ_NAME_LEN]; int (*get_target_freq)(struct devfreq *this, unsigned long *freq); - int (*init)(struct devfreq *this); - void (*exit)(struct devfreq *this); - const bool no_central_polling; + int (*event_handler)(struct devfreq *devfreq, + unsigned int event, void *data); }; /** * struct devfreq - Device devfreq structure - * @node list node - contains the devices with devfreq that have been + * @node: list node - contains the devices with devfreq that have been * registered. - * @lock a mutex to protect accessing devfreq. - * @dev device registered by devfreq class. dev.parent is the device + * @lock: a mutex to protect accessing devfreq. + * @dev: device registered by devfreq class. dev.parent is the device * using devfreq. - * @profile device-specific devfreq profile - * @governor method how to choose frequency based on the usage. - * @nb notifier block used to notify devfreq object that it should + * @profile: device-specific devfreq profile + * @governor: method how to choose frequency based on the usage. + * @governor_name: devfreq governor name for use with this devfreq + * @nb: notifier block used to notify devfreq object that it should * reevaluate operable frequencies. Devfreq users may use * devfreq.nb to the corresponding register notifier call chain. - * @polling_jiffies interval in jiffies. - * @previous_freq previously configured frequency value. - * @next_polling the number of remaining jiffies to poll with - * "devfreq_monitor" executions to reevaluate - * frequency/voltage of the device. Set by - * profile's polling_ms interval. - * @data Private data of the governor. The devfreq framework does not + * @work: delayed work for load monitoring. + * @previous_freq: previously configured frequency value. + * @data: Private data of the governor. The devfreq framework does not * touch this. - * @being_removed a flag to mark that this object is being removed in - * order to prevent trying to remove the object multiple times. - * @min_freq Limit minimum frequency requested by user (0: none) - * @max_freq Limit maximum frequency requested by user (0: none) + * @min_freq: Limit minimum frequency requested by user (0: none) + * @max_freq: Limit maximum frequency requested by user (0: none) + * @stop_polling: devfreq polling status of a device. + * @total_trans: Number of devfreq transitions + * @trans_table: Statistics of devfreq transitions + * @time_in_state: Statistics of devfreq states + * @last_stat_updated: The last time stat updated * * This structure stores the devfreq information for a give device. * @@ -152,26 +156,33 @@ struct devfreq { struct device dev; struct devfreq_dev_profile *profile; const struct devfreq_governor *governor; + char governor_name[DEVFREQ_NAME_LEN]; struct notifier_block nb; + struct delayed_work work; - unsigned long polling_jiffies; unsigned long previous_freq; - unsigned int next_polling; void *data; /* private data for governors */ - bool being_removed; - unsigned long min_freq; unsigned long max_freq; + bool stop_polling; + + /* information for device freqeuncy transition */ + unsigned int total_trans; + unsigned int *trans_table; + unsigned long *time_in_state; + unsigned long last_stat_updated; }; #if defined(CONFIG_PM_DEVFREQ) extern struct devfreq *devfreq_add_device(struct device *dev, struct devfreq_dev_profile *profile, - const struct devfreq_governor *governor, + const char *governor_name, void *data); extern int devfreq_remove_device(struct devfreq *devfreq); +extern int devfreq_suspend_device(struct devfreq *devfreq); +extern int devfreq_resume_device(struct devfreq *devfreq); /* Helper functions for devfreq user device driver with OPP. */ extern struct opp *devfreq_recommended_opp(struct device *dev, @@ -181,23 +192,13 @@ extern int devfreq_register_opp_notifier(struct device *dev, extern int devfreq_unregister_opp_notifier(struct device *dev, struct devfreq *devfreq); -#ifdef CONFIG_DEVFREQ_GOV_POWERSAVE -extern const struct devfreq_governor devfreq_powersave; -#endif -#ifdef CONFIG_DEVFREQ_GOV_PERFORMANCE -extern const struct devfreq_governor devfreq_performance; -#endif -#ifdef CONFIG_DEVFREQ_GOV_USERSPACE -extern const struct devfreq_governor devfreq_userspace; -#endif -#ifdef CONFIG_DEVFREQ_GOV_SIMPLE_ONDEMAND -extern const struct devfreq_governor devfreq_simple_ondemand; +#if IS_ENABLED(CONFIG_DEVFREQ_GOV_SIMPLE_ONDEMAND) /** * struct devfreq_simple_ondemand_data - void *data fed to struct devfreq * and devfreq_add_device - * @ upthreshold If the load is over this value, the frequency jumps. + * @upthreshold: If the load is over this value, the frequency jumps. * Specify 0 to use the default. Valid value = 0 to 100. - * @ downdifferential If the load is under upthreshold - downdifferential, + * @downdifferential: If the load is under upthreshold - downdifferential, * the governor may consider slowing the frequency down. * Specify 0 to use the default. Valid value = 0 to 100. * downdifferential < upthreshold must hold. @@ -214,7 +215,7 @@ struct devfreq_simple_ondemand_data { #else /* !CONFIG_PM_DEVFREQ */ static struct devfreq *devfreq_add_device(struct device *dev, struct devfreq_dev_profile *profile, - struct devfreq_governor *governor, + const char *governor_name, void *data) { return NULL; @@ -225,6 +226,16 @@ static int devfreq_remove_device(struct devfreq *devfreq) return 0; } +static int devfreq_suspend_device(struct devfreq *devfreq) +{ + return 0; +} + +static int devfreq_resume_device(struct devfreq *devfreq) +{ + return 0; +} + static struct opp *devfreq_recommended_opp(struct device *dev, unsigned long *freq, u32 flags) { @@ -243,11 +254,6 @@ static int devfreq_unregister_opp_notifier(struct device *dev, return -EINVAL; } -#define devfreq_powersave NULL -#define devfreq_performance NULL -#define devfreq_userspace NULL -#define devfreq_simple_ondemand NULL - #endif /* CONFIG_PM_DEVFREQ */ #endif /* __LINUX_DEVFREQ_H__ */ diff --git a/include/linux/device.h b/include/linux/device.h index 86ef6ab553b1..43dcda937ddf 100644 --- a/include/linux/device.h +++ b/include/linux/device.h @@ -190,6 +190,7 @@ extern struct klist *bus_get_device_klist(struct bus_type *bus); * @mod_name: Used for built-in modules. * @suppress_bind_attrs: Disables bind/unbind via sysfs. * @of_match_table: The open firmware table. + * @acpi_match_table: The ACPI match table. * @probe: Called to query the existence of a specific device, * whether this driver can work with it, and bind the driver * to a specific device. @@ -223,6 +224,7 @@ struct device_driver { bool suppress_bind_attrs; /* disables bind/unbind via sysfs */ const struct of_device_id *of_match_table; + const struct acpi_device_id *acpi_match_table; int (*probe) (struct device *dev); int (*remove) (struct device *dev); @@ -496,6 +498,10 @@ ssize_t device_show_int(struct device *dev, struct device_attribute *attr, char *buf); ssize_t device_store_int(struct device *dev, struct device_attribute *attr, const char *buf, size_t count); +ssize_t device_show_bool(struct device *dev, struct device_attribute *attr, + char *buf); +ssize_t device_store_bool(struct device *dev, struct device_attribute *attr, + const char *buf, size_t count); #define DEVICE_ATTR(_name, _mode, _show, _store) \ struct device_attribute dev_attr_##_name = __ATTR(_name, _mode, _show, _store) @@ -505,6 +511,9 @@ ssize_t device_store_int(struct device *dev, struct device_attribute *attr, #define DEVICE_INT_ATTR(_name, _mode, _var) \ struct dev_ext_attribute dev_attr_##_name = \ { __ATTR(_name, _mode, device_show_int, device_store_int), &(_var) } +#define DEVICE_BOOL_ATTR(_name, _mode, _var) \ + struct dev_ext_attribute dev_attr_##_name = \ + { __ATTR(_name, _mode, device_show_bool, device_store_bool), &(_var) } #define DEVICE_ATTR_IGNORE_LOCKDEP(_name, _mode, _show, _store) \ struct device_attribute dev_attr_##_name = \ __ATTR_IGNORE_LOCKDEP(_name, _mode, _show, _store) @@ -576,6 +585,12 @@ struct device_dma_parameters { unsigned long segment_boundary_mask; }; +struct acpi_dev_node { +#ifdef CONFIG_ACPI + void *handle; +#endif +}; + /** * struct device - The basic device structure * @parent: The device's "parent" device, the device to which it is attached. @@ -616,6 +631,7 @@ struct device_dma_parameters { * @dma_mem: Internal for coherent mem override. * @archdata: For arch-specific additions. * @of_node: Associated device tree node. + * @acpi_node: Associated ACPI device node. * @devt: For creating the sysfs "dev". * @id: device instance * @devres_lock: Spinlock to protect the resource of the device. @@ -680,6 +696,7 @@ struct device { struct dev_archdata archdata; struct device_node *of_node; /* associated device tree node */ + struct acpi_dev_node acpi_node; /* associated ACPI device node */ dev_t devt; /* dev_t, creates the sysfs "dev" */ u32 id; /* device instance */ @@ -700,6 +717,14 @@ static inline struct device *kobj_to_dev(struct kobject *kobj) return container_of(kobj, struct device, kobj); } +#ifdef CONFIG_ACPI +#define ACPI_HANDLE(dev) ((dev)->acpi_node.handle) +#define ACPI_HANDLE_SET(dev, _handle_) (dev)->acpi_node.handle = (_handle_) +#else +#define ACPI_HANDLE(dev) (NULL) +#define ACPI_HANDLE_SET(dev, _handle_) do { } while (0) +#endif + /* Get the wakeup routines, which depend on struct device */ #include <linux/pm_wakeup.h> diff --git a/include/linux/devpts_fs.h b/include/linux/devpts_fs.h index 5ce0e5fd712e..251a2090a554 100644 --- a/include/linux/devpts_fs.h +++ b/include/linux/devpts_fs.h @@ -20,28 +20,28 @@ int devpts_new_index(struct inode *ptmx_inode); void devpts_kill_index(struct inode *ptmx_inode, int idx); /* mknod in devpts */ -int devpts_pty_new(struct inode *ptmx_inode, struct tty_struct *tty); -/* get tty structure */ -struct tty_struct *devpts_get_tty(struct inode *pts_inode, int number); +struct inode *devpts_pty_new(struct inode *ptmx_inode, dev_t device, int index, + void *priv); +/* get private structure */ +void *devpts_get_priv(struct inode *pts_inode); /* unlink */ -void devpts_pty_kill(struct tty_struct *tty); +void devpts_pty_kill(struct inode *inode); #else /* Dummy stubs in the no-pty case */ static inline int devpts_new_index(struct inode *ptmx_inode) { return -EINVAL; } static inline void devpts_kill_index(struct inode *ptmx_inode, int idx) { } -static inline int devpts_pty_new(struct inode *ptmx_inode, - struct tty_struct *tty) +static inline struct inode *devpts_pty_new(struct inode *ptmx_inode, + dev_t device, int index, void *priv) { - return -EINVAL; + return ERR_PTR(-EINVAL); } -static inline struct tty_struct *devpts_get_tty(struct inode *pts_inode, - int number) +static inline void *devpts_get_priv(struct inode *pts_inode) { return NULL; } -static inline void devpts_pty_kill(struct tty_struct *tty) { } +static inline void devpts_pty_kill(struct inode *inode) { } #endif diff --git a/include/linux/dlm.h b/include/linux/dlm.h index 1d47dcce11e1..d02da2c6fc1a 100644 --- a/include/linux/dlm.h +++ b/include/linux/dlm.h @@ -98,7 +98,7 @@ int dlm_release_lockspace(dlm_lockspace_t *lockspace, int force); /* * dlm_lock * - * Make an asyncronous request to acquire or convert a lock on a named + * Make an asynchronous request to acquire or convert a lock on a named * resource. * * lockspace: context for the request diff --git a/include/linux/dma-contiguous.h b/include/linux/dma-contiguous.h index 2f303e4b7ed3..01b5c84be828 100644 --- a/include/linux/dma-contiguous.h +++ b/include/linux/dma-contiguous.h @@ -68,7 +68,7 @@ struct device; extern struct cma *dma_contiguous_default_area; void dma_contiguous_reserve(phys_addr_t addr_limit); -int dma_declare_contiguous(struct device *dev, unsigned long size, +int dma_declare_contiguous(struct device *dev, phys_addr_t size, phys_addr_t base, phys_addr_t limit); struct page *dma_alloc_from_contiguous(struct device *dev, int count, @@ -83,7 +83,7 @@ bool dma_release_from_contiguous(struct device *dev, struct page *pages, static inline void dma_contiguous_reserve(phys_addr_t limit) { } static inline -int dma_declare_contiguous(struct device *dev, unsigned long size, +int dma_declare_contiguous(struct device *dev, phys_addr_t size, phys_addr_t base, phys_addr_t limit) { return -ENOSYS; diff --git a/include/linux/dma/ipu-dma.h b/include/linux/dma/ipu-dma.h new file mode 100644 index 000000000000..18031115c668 --- /dev/null +++ b/include/linux/dma/ipu-dma.h @@ -0,0 +1,177 @@ +/* + * Copyright (C) 2008 + * Guennadi Liakhovetski, DENX Software Engineering, <lg@denx.de> + * + * Copyright (C) 2005-2007 Freescale Semiconductor, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#ifndef __LINUX_DMA_IPU_DMA_H +#define __LINUX_DMA_IPU_DMA_H + +#include <linux/types.h> +#include <linux/dmaengine.h> + +/* IPU DMA Controller channel definitions. */ +enum ipu_channel { + IDMAC_IC_0 = 0, /* IC (encoding task) to memory */ + IDMAC_IC_1 = 1, /* IC (viewfinder task) to memory */ + IDMAC_ADC_0 = 1, + IDMAC_IC_2 = 2, + IDMAC_ADC_1 = 2, + IDMAC_IC_3 = 3, + IDMAC_IC_4 = 4, + IDMAC_IC_5 = 5, + IDMAC_IC_6 = 6, + IDMAC_IC_7 = 7, /* IC (sensor data) to memory */ + IDMAC_IC_8 = 8, + IDMAC_IC_9 = 9, + IDMAC_IC_10 = 10, + IDMAC_IC_11 = 11, + IDMAC_IC_12 = 12, + IDMAC_IC_13 = 13, + IDMAC_SDC_0 = 14, /* Background synchronous display data */ + IDMAC_SDC_1 = 15, /* Foreground data (overlay) */ + IDMAC_SDC_2 = 16, + IDMAC_SDC_3 = 17, + IDMAC_ADC_2 = 18, + IDMAC_ADC_3 = 19, + IDMAC_ADC_4 = 20, + IDMAC_ADC_5 = 21, + IDMAC_ADC_6 = 22, + IDMAC_ADC_7 = 23, + IDMAC_PF_0 = 24, + IDMAC_PF_1 = 25, + IDMAC_PF_2 = 26, + IDMAC_PF_3 = 27, + IDMAC_PF_4 = 28, + IDMAC_PF_5 = 29, + IDMAC_PF_6 = 30, + IDMAC_PF_7 = 31, +}; + +/* Order significant! */ +enum ipu_channel_status { + IPU_CHANNEL_FREE, + IPU_CHANNEL_INITIALIZED, + IPU_CHANNEL_READY, + IPU_CHANNEL_ENABLED, +}; + +#define IPU_CHANNELS_NUM 32 + +enum pixel_fmt { + /* 1 byte */ + IPU_PIX_FMT_GENERIC, + IPU_PIX_FMT_RGB332, + IPU_PIX_FMT_YUV420P, + IPU_PIX_FMT_YUV422P, + IPU_PIX_FMT_YUV420P2, + IPU_PIX_FMT_YVU422P, + /* 2 bytes */ + IPU_PIX_FMT_RGB565, + IPU_PIX_FMT_RGB666, + IPU_PIX_FMT_BGR666, + IPU_PIX_FMT_YUYV, + IPU_PIX_FMT_UYVY, + /* 3 bytes */ + IPU_PIX_FMT_RGB24, + IPU_PIX_FMT_BGR24, + /* 4 bytes */ + IPU_PIX_FMT_GENERIC_32, + IPU_PIX_FMT_RGB32, + IPU_PIX_FMT_BGR32, + IPU_PIX_FMT_ABGR32, + IPU_PIX_FMT_BGRA32, + IPU_PIX_FMT_RGBA32, +}; + +enum ipu_color_space { + IPU_COLORSPACE_RGB, + IPU_COLORSPACE_YCBCR, + IPU_COLORSPACE_YUV +}; + +/* + * Enumeration of IPU rotation modes + */ +enum ipu_rotate_mode { + /* Note the enum values correspond to BAM value */ + IPU_ROTATE_NONE = 0, + IPU_ROTATE_VERT_FLIP = 1, + IPU_ROTATE_HORIZ_FLIP = 2, + IPU_ROTATE_180 = 3, + IPU_ROTATE_90_RIGHT = 4, + IPU_ROTATE_90_RIGHT_VFLIP = 5, + IPU_ROTATE_90_RIGHT_HFLIP = 6, + IPU_ROTATE_90_LEFT = 7, +}; + +/* + * Enumeration of DI ports for ADC. + */ +enum display_port { + DISP0, + DISP1, + DISP2, + DISP3 +}; + +struct idmac_video_param { + unsigned short in_width; + unsigned short in_height; + uint32_t in_pixel_fmt; + unsigned short out_width; + unsigned short out_height; + uint32_t out_pixel_fmt; + unsigned short out_stride; + bool graphics_combine_en; + bool global_alpha_en; + bool key_color_en; + enum display_port disp; + unsigned short out_left; + unsigned short out_top; +}; + +/* + * Union of initialization parameters for a logical channel. So far only video + * parameters are used. + */ +union ipu_channel_param { + struct idmac_video_param video; +}; + +struct idmac_tx_desc { + struct dma_async_tx_descriptor txd; + struct scatterlist *sg; /* scatterlist for this */ + unsigned int sg_len; /* tx-descriptor. */ + struct list_head list; +}; + +struct idmac_channel { + struct dma_chan dma_chan; + dma_cookie_t completed; /* last completed cookie */ + union ipu_channel_param params; + enum ipu_channel link; /* input channel, linked to the output */ + enum ipu_channel_status status; + void *client; /* Only one client per channel */ + unsigned int n_tx_desc; + struct idmac_tx_desc *desc; /* allocated tx-descriptors */ + struct scatterlist *sg[2]; /* scatterlist elements in buffer-0 and -1 */ + struct list_head free_list; /* free tx-descriptors */ + struct list_head queue; /* queued tx-descriptors */ + spinlock_t lock; /* protects sg[0,1], queue */ + struct mutex chan_mutex; /* protects status, cookie, free_list */ + bool sec_chan_en; + int active_buffer; + unsigned int eof_irq; + char eof_name[16]; /* EOF IRQ name for request_irq() */ +}; + +#define to_tx_desc(tx) container_of(tx, struct idmac_tx_desc, txd) +#define to_idmac_chan(c) container_of(c, struct idmac_channel, dma_chan) + +#endif /* __LINUX_DMA_IPU_DMA_H */ diff --git a/include/linux/dvb/Kbuild b/include/linux/dvb/Kbuild deleted file mode 100644 index e69de29bb2d1..000000000000 --- a/include/linux/dvb/Kbuild +++ /dev/null diff --git a/include/linux/dvb/dmx.h b/include/linux/dvb/dmx.h deleted file mode 100644 index 0be6d8f2b52b..000000000000 --- a/include/linux/dvb/dmx.h +++ /dev/null @@ -1,29 +0,0 @@ -/* - * dmx.h - * - * Copyright (C) 2000 Marcus Metzler <marcus@convergence.de> - * & Ralph Metzler <ralph@convergence.de> - * for convergence integrated media GmbH - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU Lesser General Public License - * as published by the Free Software Foundation; either version 2.1 - * of the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU Lesser General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. - * - */ -#ifndef _DVBDMX_H_ -#define _DVBDMX_H_ - -#include <linux/time.h> -#include <uapi/linux/dvb/dmx.h> - -#endif /*_DVBDMX_H_*/ diff --git a/include/linux/dvb/video.h b/include/linux/dvb/video.h deleted file mode 100644 index 85c20d925696..000000000000 --- a/include/linux/dvb/video.h +++ /dev/null @@ -1,29 +0,0 @@ -/* - * video.h - * - * Copyright (C) 2000 Marcus Metzler <marcus@convergence.de> - * & Ralph Metzler <ralph@convergence.de> - * for convergence integrated media GmbH - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU Lesser General Public License - * as published by the Free Software Foundation; either version 2.1 - * of the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU Lesser General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. - * - */ -#ifndef _DVBVIDEO_H_ -#define _DVBVIDEO_H_ - -#include <linux/compiler.h> -#include <uapi/linux/dvb/video.h> - -#endif /*_DVBVIDEO_H_*/ diff --git a/include/linux/earlycpio.h b/include/linux/earlycpio.h new file mode 100644 index 000000000000..111f46d83d00 --- /dev/null +++ b/include/linux/earlycpio.h @@ -0,0 +1,17 @@ +#ifndef _LINUX_EARLYCPIO_H +#define _LINUX_EARLYCPIO_H + +#include <linux/types.h> + +#define MAX_CPIO_FILE_NAME 18 + +struct cpio_data { + void *data; + size_t size; + char name[MAX_CPIO_FILE_NAME]; +}; + +struct cpio_data find_cpio_data(const char *path, void *data, size_t len, + long *offset); + +#endif /* _LINUX_EARLYCPIO_H */ diff --git a/include/linux/edac.h b/include/linux/edac.h index bab9f8473dc1..1b8c02b36f76 100644 --- a/include/linux/edac.h +++ b/include/linux/edac.h @@ -533,6 +533,7 @@ struct csrow_info { u32 ue_count; /* Uncorrectable Errors for this csrow */ u32 ce_count; /* Correctable Errors for this csrow */ + u32 nr_pages; /* combined pages count of all channels */ struct mem_ctl_info *mci; /* the parent */ @@ -667,6 +668,8 @@ struct mem_ctl_info { u32 fake_inject_ue; u16 fake_inject_count; #endif + __u8 csbased : 1, /* csrow-based memory controller */ + __resv : 7; }; #endif diff --git a/include/linux/efi.h b/include/linux/efi.h index 8670eb1eb8cd..02a69418be18 100644 --- a/include/linux/efi.h +++ b/include/linux/efi.h @@ -29,7 +29,12 @@ #define EFI_UNSUPPORTED ( 3 | (1UL << (BITS_PER_LONG-1))) #define EFI_BAD_BUFFER_SIZE ( 4 | (1UL << (BITS_PER_LONG-1))) #define EFI_BUFFER_TOO_SMALL ( 5 | (1UL << (BITS_PER_LONG-1))) +#define EFI_NOT_READY ( 6 | (1UL << (BITS_PER_LONG-1))) +#define EFI_DEVICE_ERROR ( 7 | (1UL << (BITS_PER_LONG-1))) +#define EFI_WRITE_PROTECTED ( 8 | (1UL << (BITS_PER_LONG-1))) +#define EFI_OUT_OF_RESOURCES ( 9 | (1UL << (BITS_PER_LONG-1))) #define EFI_NOT_FOUND (14 | (1UL << (BITS_PER_LONG-1))) +#define EFI_SECURITY_VIOLATION (26 | (1UL << (BITS_PER_LONG-1))) typedef unsigned long efi_status_t; typedef u8 efi_bool_t; @@ -196,6 +201,77 @@ typedef struct { void *create_event_ex; } efi_boot_services_t; +typedef enum { + EfiPciIoWidthUint8, + EfiPciIoWidthUint16, + EfiPciIoWidthUint32, + EfiPciIoWidthUint64, + EfiPciIoWidthFifoUint8, + EfiPciIoWidthFifoUint16, + EfiPciIoWidthFifoUint32, + EfiPciIoWidthFifoUint64, + EfiPciIoWidthFillUint8, + EfiPciIoWidthFillUint16, + EfiPciIoWidthFillUint32, + EfiPciIoWidthFillUint64, + EfiPciIoWidthMaximum +} EFI_PCI_IO_PROTOCOL_WIDTH; + +typedef enum { + EfiPciIoAttributeOperationGet, + EfiPciIoAttributeOperationSet, + EfiPciIoAttributeOperationEnable, + EfiPciIoAttributeOperationDisable, + EfiPciIoAttributeOperationSupported, + EfiPciIoAttributeOperationMaximum +} EFI_PCI_IO_PROTOCOL_ATTRIBUTE_OPERATION; + + +typedef struct { + void *read; + void *write; +} efi_pci_io_protocol_access_t; + +typedef struct { + void *poll_mem; + void *poll_io; + efi_pci_io_protocol_access_t mem; + efi_pci_io_protocol_access_t io; + efi_pci_io_protocol_access_t pci; + void *copy_mem; + void *map; + void *unmap; + void *allocate_buffer; + void *free_buffer; + void *flush; + void *get_location; + void *attributes; + void *get_bar_attributes; + void *set_bar_attributes; + uint64_t romsize; + void *romimage; +} efi_pci_io_protocol; + +#define EFI_PCI_IO_ATTRIBUTE_ISA_MOTHERBOARD_IO 0x0001 +#define EFI_PCI_IO_ATTRIBUTE_ISA_IO 0x0002 +#define EFI_PCI_IO_ATTRIBUTE_VGA_PALETTE_IO 0x0004 +#define EFI_PCI_IO_ATTRIBUTE_VGA_MEMORY 0x0008 +#define EFI_PCI_IO_ATTRIBUTE_VGA_IO 0x0010 +#define EFI_PCI_IO_ATTRIBUTE_IDE_PRIMARY_IO 0x0020 +#define EFI_PCI_IO_ATTRIBUTE_IDE_SECONDARY_IO 0x0040 +#define EFI_PCI_IO_ATTRIBUTE_MEMORY_WRITE_COMBINE 0x0080 +#define EFI_PCI_IO_ATTRIBUTE_IO 0x0100 +#define EFI_PCI_IO_ATTRIBUTE_MEMORY 0x0200 +#define EFI_PCI_IO_ATTRIBUTE_BUS_MASTER 0x0400 +#define EFI_PCI_IO_ATTRIBUTE_MEMORY_CACHED 0x0800 +#define EFI_PCI_IO_ATTRIBUTE_MEMORY_DISABLE 0x1000 +#define EFI_PCI_IO_ATTRIBUTE_EMBEDDED_DEVICE 0x2000 +#define EFI_PCI_IO_ATTRIBUTE_EMBEDDED_ROM 0x4000 +#define EFI_PCI_IO_ATTRIBUTE_DUAL_ADDRESS_CYCLE 0x8000 +#define EFI_PCI_IO_ATTRIBUTE_ISA_IO_16 0x10000 +#define EFI_PCI_IO_ATTRIBUTE_VGA_PALETTE_IO_16 0x20000 +#define EFI_PCI_IO_ATTRIBUTE_VGA_IO_16 0x40000 + /* * Types and defines for EFI ResetSystem */ @@ -511,8 +587,6 @@ extern u64 efi_mem_attribute (unsigned long phys_addr, unsigned long size); extern int __init efi_uart_console_only (void); extern void efi_initialize_iomem_resources(struct resource *code_resource, struct resource *data_resource, struct resource *bss_resource); -extern unsigned long efi_get_time(void); -extern int efi_set_rtc_mmss(unsigned long nowtime); extern void efi_reserve_boot_services(void); extern struct efi_memory_map memmap; @@ -643,6 +717,7 @@ struct efivar_operations { efi_get_variable_t *get_variable; efi_get_next_variable_t *get_next_variable; efi_set_variable_t *set_variable; + efi_query_variable_info_t *query_variable_info; }; struct efivars { @@ -657,6 +732,7 @@ struct efivars { spinlock_t lock; struct list_head list; struct kset *kset; + struct kobject *kobject; struct bin_attribute *new_var, *del_var; const struct efivar_operations *ops; struct efivar_entry *walk_entry; diff --git a/include/linux/etherdevice.h b/include/linux/etherdevice.h index b006ba0a9f42..243eea1e33d8 100644 --- a/include/linux/etherdevice.h +++ b/include/linux/etherdevice.h @@ -51,6 +51,26 @@ extern struct net_device *alloc_etherdev_mqs(int sizeof_priv, unsigned int txqs, #define alloc_etherdev(sizeof_priv) alloc_etherdev_mq(sizeof_priv, 1) #define alloc_etherdev_mq(sizeof_priv, count) alloc_etherdev_mqs(sizeof_priv, count, count) +/* Reserved Ethernet Addresses per IEEE 802.1Q */ +static const u8 eth_reserved_addr_base[ETH_ALEN] __aligned(2) = +{ 0x01, 0x80, 0xc2, 0x00, 0x00, 0x00 }; + +/** + * is_link_local_ether_addr - Determine if given Ethernet address is link-local + * @addr: Pointer to a six-byte array containing the Ethernet address + * + * Return true if address is link local reserved addr (01:80:c2:00:00:0X) per + * IEEE 802.1Q 8.6.3 Frame filtering. + */ +static inline bool is_link_local_ether_addr(const u8 *addr) +{ + __be16 *a = (__be16 *)addr; + static const __be16 *b = (const __be16 *)eth_reserved_addr_base; + static const __be16 m = cpu_to_be16(0xfff0); + + return ((a[0] ^ b[0]) | (a[1] ^ b[1]) | ((a[2] ^ b[2]) & m)) == 0; +} + /** * is_zero_ether_addr - Determine if give Ethernet address is all zeros. * @addr: Pointer to a six-byte array containing the Ethernet address diff --git a/include/linux/fdtable.h b/include/linux/fdtable.h index 45052aa814c8..fb7dacae0522 100644 --- a/include/linux/fdtable.h +++ b/include/linux/fdtable.h @@ -95,7 +95,6 @@ struct task_struct; struct files_struct *get_files_struct(struct task_struct *); void put_files_struct(struct files_struct *fs); void reset_files_struct(struct files_struct *); -void daemonize_descriptors(void); int unshare_files(struct files_struct **); struct files_struct *dup_fd(struct files_struct *, int *); void do_close_on_exec(struct files_struct *); diff --git a/include/linux/filter.h b/include/linux/filter.h index 24d251f3bab0..c45eabc135e1 100644 --- a/include/linux/filter.h +++ b/include/linux/filter.h @@ -45,6 +45,7 @@ extern void sk_unattached_filter_destroy(struct sk_filter *fp); extern int sk_attach_filter(struct sock_fprog *fprog, struct sock *sk); extern int sk_detach_filter(struct sock *sk); extern int sk_chk_filter(struct sock_filter *filter, unsigned int flen); +extern int sk_get_filter(struct sock *sk, struct sock_filter __user *filter, unsigned len); #ifdef CONFIG_BPF_JIT extern void bpf_jit_compile(struct sk_filter *fp); @@ -123,6 +124,8 @@ enum { BPF_S_ANC_CPU, BPF_S_ANC_ALU_XOR_X, BPF_S_ANC_SECCOMP_LD_W, + BPF_S_ANC_VLAN_TAG, + BPF_S_ANC_VLAN_TAG_PRESENT, }; #endif /* __LINUX_FILTER_H__ */ diff --git a/include/linux/freezer.h b/include/linux/freezer.h index d09af4b67cf1..e4238ceaa4d6 100644 --- a/include/linux/freezer.h +++ b/include/linux/freezer.h @@ -75,35 +75,68 @@ static inline bool cgroup_freezing(struct task_struct *task) */ -/* Tell the freezer not to count the current task as freezable. */ +/** + * freezer_do_not_count - tell freezer to ignore %current + * + * Tell freezers to ignore the current task when determining whether the + * target frozen state is reached. IOW, the current task will be + * considered frozen enough by freezers. + * + * The caller shouldn't do anything which isn't allowed for a frozen task + * until freezer_cont() is called. Usually, freezer[_do_not]_count() pair + * wrap a scheduling operation and nothing much else. + */ static inline void freezer_do_not_count(void) { current->flags |= PF_FREEZER_SKIP; } -/* - * Tell the freezer to count the current task as freezable again and try to - * freeze it. +/** + * freezer_count - tell freezer to stop ignoring %current + * + * Undo freezer_do_not_count(). It tells freezers that %current should be + * considered again and tries to freeze if freezing condition is already in + * effect. */ static inline void freezer_count(void) { current->flags &= ~PF_FREEZER_SKIP; + /* + * If freezing is in progress, the following paired with smp_mb() + * in freezer_should_skip() ensures that either we see %true + * freezing() or freezer_should_skip() sees !PF_FREEZER_SKIP. + */ + smp_mb(); try_to_freeze(); } -/* - * Check if the task should be counted as freezable by the freezer +/** + * freezer_should_skip - whether to skip a task when determining frozen + * state is reached + * @p: task in quesion + * + * This function is used by freezers after establishing %true freezing() to + * test whether a task should be skipped when determining the target frozen + * state is reached. IOW, if this function returns %true, @p is considered + * frozen enough. */ -static inline int freezer_should_skip(struct task_struct *p) +static inline bool freezer_should_skip(struct task_struct *p) { - return !!(p->flags & PF_FREEZER_SKIP); + /* + * The following smp_mb() paired with the one in freezer_count() + * ensures that either freezer_count() sees %true freezing() or we + * see cleared %PF_FREEZER_SKIP and return %false. This makes it + * impossible for a task to slip frozen state testing after + * clearing %PF_FREEZER_SKIP. + */ + smp_mb(); + return p->flags & PF_FREEZER_SKIP; } /* - * These macros are intended to be used whenever you want allow a task that's - * sleeping in TASK_UNINTERRUPTIBLE or TASK_KILLABLE state to be frozen. Note - * that neither return any clear indication of whether a freeze event happened - * while in this function. + * These macros are intended to be used whenever you want allow a sleeping + * task to be frozen. Note that neither return any clear indication of + * whether a freeze event happened while in this function. */ /* Like schedule(), but should not block the freezer. */ @@ -177,6 +210,7 @@ static inline int freeze_kernel_threads(void) { return -ENOSYS; } static inline void thaw_processes(void) {} static inline void thaw_kernel_threads(void) {} +static inline bool try_to_freeze_nowarn(void) { return false; } static inline bool try_to_freeze(void) { return false; } static inline void freezer_do_not_count(void) {} diff --git a/include/linux/fs.h b/include/linux/fs.h index b33cfc97b9ca..408fb1e77a0a 100644 --- a/include/linux/fs.h +++ b/include/linux/fs.h @@ -418,7 +418,7 @@ struct address_space { struct backing_dev_info *backing_dev_info; /* device readahead, etc */ spinlock_t private_lock; /* for use by the address_space */ struct list_head private_list; /* ditto */ - struct address_space *assoc_mapping; /* ditto */ + void *private_data; /* ditto */ } __attribute__((aligned(sizeof(long)))); /* * On most architectures that alignment is already the case; but @@ -462,8 +462,6 @@ struct block_device { int bd_fsfreeze_count; /* Mutex for freeze */ struct mutex bd_fsfreeze_mutex; - /* A semaphore that prevents I/O while block size is being changed */ - struct percpu_rw_semaphore bd_block_size_semaphore; }; /* @@ -2049,7 +2047,6 @@ extern void unregister_blkdev(unsigned int, const char *); extern struct block_device *bdget(dev_t); extern struct block_device *bdgrab(struct block_device *bdev); extern void bd_set_size(struct block_device *, loff_t size); -extern sector_t blkdev_max_block(struct block_device *bdev); extern void bd_forget(struct inode *inode); extern void bdput(struct block_device *); extern void invalidate_bdev(struct block_device *); @@ -2379,8 +2376,6 @@ extern int generic_segment_checks(const struct iovec *iov, unsigned long *nr_segs, size_t *count, int access_flags); /* fs/block_dev.c */ -extern ssize_t blkdev_aio_read(struct kiocb *iocb, const struct iovec *iov, - unsigned long nr_segs, loff_t pos); extern ssize_t blkdev_aio_write(struct kiocb *iocb, const struct iovec *iov, unsigned long nr_segs, loff_t pos); extern int blkdev_fsync(struct file *filp, loff_t start, loff_t end, diff --git a/include/linux/fs_struct.h b/include/linux/fs_struct.h index 003dc0fd7347..d0ae3a84bcfb 100644 --- a/include/linux/fs_struct.h +++ b/include/linux/fs_struct.h @@ -21,7 +21,6 @@ extern void set_fs_root(struct fs_struct *, struct path *); extern void set_fs_pwd(struct fs_struct *, struct path *); extern struct fs_struct *copy_fs_struct(struct fs_struct *); extern void free_fs_struct(struct fs_struct *); -extern void daemonize_fs_struct(void); extern int unshare_fs_struct(void); static inline void get_fs_root(struct fs_struct *fs, struct path *root) diff --git a/include/linux/ftrace_event.h b/include/linux/ftrace_event.h index 642928cf57b4..a3d489531d83 100644 --- a/include/linux/ftrace_event.h +++ b/include/linux/ftrace_event.h @@ -86,6 +86,12 @@ struct trace_iterator { cpumask_var_t started; }; +enum trace_iter_flags { + TRACE_FILE_LAT_FMT = 1, + TRACE_FILE_ANNOTATE = 2, + TRACE_FILE_TIME_IN_NS = 4, +}; + struct trace_event; @@ -127,13 +133,13 @@ trace_current_buffer_lock_reserve(struct ring_buffer **current_buffer, void trace_current_buffer_unlock_commit(struct ring_buffer *buffer, struct ring_buffer_event *event, unsigned long flags, int pc); -void trace_nowake_buffer_unlock_commit(struct ring_buffer *buffer, - struct ring_buffer_event *event, - unsigned long flags, int pc); -void trace_nowake_buffer_unlock_commit_regs(struct ring_buffer *buffer, - struct ring_buffer_event *event, - unsigned long flags, int pc, - struct pt_regs *regs); +void trace_buffer_unlock_commit(struct ring_buffer *buffer, + struct ring_buffer_event *event, + unsigned long flags, int pc); +void trace_buffer_unlock_commit_regs(struct ring_buffer *buffer, + struct ring_buffer_event *event, + unsigned long flags, int pc, + struct pt_regs *regs); void trace_current_buffer_discard_commit(struct ring_buffer *buffer, struct ring_buffer_event *event); diff --git a/include/linux/gfp.h b/include/linux/gfp.h index 02c1c9710be0..f74856e17e48 100644 --- a/include/linux/gfp.h +++ b/include/linux/gfp.h @@ -31,8 +31,10 @@ struct vm_area_struct; #define ___GFP_THISNODE 0x40000u #define ___GFP_RECLAIMABLE 0x80000u #define ___GFP_NOTRACK 0x200000u +#define ___GFP_NO_KSWAPD 0x400000u #define ___GFP_OTHER_NODE 0x800000u #define ___GFP_WRITE 0x1000000u +/* If the above are modified, __GFP_BITS_SHIFT may need updating */ /* * GFP bitmasks.. @@ -85,6 +87,7 @@ struct vm_area_struct; #define __GFP_RECLAIMABLE ((__force gfp_t)___GFP_RECLAIMABLE) /* Page is reclaimable */ #define __GFP_NOTRACK ((__force gfp_t)___GFP_NOTRACK) /* Don't track with kmemcheck */ +#define __GFP_NO_KSWAPD ((__force gfp_t)___GFP_NO_KSWAPD) #define __GFP_OTHER_NODE ((__force gfp_t)___GFP_OTHER_NODE) /* On behalf of other node */ #define __GFP_WRITE ((__force gfp_t)___GFP_WRITE) /* Allocator intends to dirty page */ @@ -114,7 +117,8 @@ struct vm_area_struct; __GFP_MOVABLE) #define GFP_IOFS (__GFP_IO | __GFP_FS) #define GFP_TRANSHUGE (GFP_HIGHUSER_MOVABLE | __GFP_COMP | \ - __GFP_NOMEMALLOC | __GFP_NORETRY | __GFP_NOWARN) + __GFP_NOMEMALLOC | __GFP_NORETRY | __GFP_NOWARN | \ + __GFP_NO_KSWAPD) #ifdef CONFIG_NUMA #define GFP_THISNODE (__GFP_THISNODE | __GFP_NOWARN | __GFP_NORETRY) @@ -263,7 +267,7 @@ static inline enum zone_type gfp_zone(gfp_t flags) static inline int gfp_zonelist(gfp_t flags) { - if (NUMA_BUILD && unlikely(flags & __GFP_THISNODE)) + if (IS_ENABLED(CONFIG_NUMA) && unlikely(flags & __GFP_THISNODE)) return 1; return 0; diff --git a/include/linux/gpio.h b/include/linux/gpio.h index 2e31e8b3a190..bfe665621536 100644 --- a/include/linux/gpio.h +++ b/include/linux/gpio.h @@ -72,9 +72,9 @@ static inline int irq_to_gpio(unsigned int irq) return -EINVAL; } -#endif +#endif /* ! CONFIG_ARCH_HAVE_CUSTOM_GPIO_H */ -#else +#else /* ! CONFIG_GENERIC_GPIO */ #include <linux/kernel.h> #include <linux/types.h> @@ -231,6 +231,21 @@ static inline int irq_to_gpio(unsigned irq) return -EINVAL; } -#endif +static inline int +gpiochip_add_pin_range(struct gpio_chip *chip, const char *pinctl_name, + unsigned int gpio_offset, unsigned int pin_offset, + unsigned int npins) +{ + WARN_ON(1); + return -EINVAL; +} + +static inline void +gpiochip_remove_pin_ranges(struct gpio_chip *chip) +{ + WARN_ON(1); +} + +#endif /* ! CONFIG_GENERIC_GPIO */ #endif /* __LINUX_GPIO_H */ diff --git a/include/linux/hardirq.h b/include/linux/hardirq.h index cab3da3d0949..624ef3f45c8e 100644 --- a/include/linux/hardirq.h +++ b/include/linux/hardirq.h @@ -4,6 +4,7 @@ #include <linux/preempt.h> #include <linux/lockdep.h> #include <linux/ftrace_irq.h> +#include <linux/vtime.h> #include <asm/hardirq.h> /* @@ -129,16 +130,6 @@ extern void synchronize_irq(unsigned int irq); # define synchronize_irq(irq) barrier() #endif -struct task_struct; - -#if !defined(CONFIG_VIRT_CPU_ACCOUNTING) && !defined(CONFIG_IRQ_TIME_ACCOUNTING) -static inline void vtime_account(struct task_struct *tsk) -{ -} -#else -extern void vtime_account(struct task_struct *tsk); -#endif - #if defined(CONFIG_TINY_RCU) || defined(CONFIG_TINY_PREEMPT_RCU) static inline void rcu_nmi_enter(void) @@ -162,7 +153,7 @@ extern void rcu_nmi_exit(void); */ #define __irq_enter() \ do { \ - vtime_account(current); \ + vtime_account_irq_enter(current); \ add_preempt_count(HARDIRQ_OFFSET); \ trace_hardirq_enter(); \ } while (0) @@ -178,7 +169,7 @@ extern void irq_enter(void); #define __irq_exit() \ do { \ trace_hardirq_exit(); \ - vtime_account(current); \ + vtime_account_irq_exit(current); \ sub_preempt_count(HARDIRQ_OFFSET); \ } while (0) diff --git a/include/linux/hash.h b/include/linux/hash.h index 24df9e70406f..61c97ae22e01 100644 --- a/include/linux/hash.h +++ b/include/linux/hash.h @@ -1,7 +1,7 @@ #ifndef _LINUX_HASH_H #define _LINUX_HASH_H /* Fast hashing routine for ints, longs and pointers. - (C) 2002 William Lee Irwin III, IBM */ + (C) 2002 Nadia Yvette Chambers, IBM */ /* * Knuth recommends primes in approximately golden ratio to the maximum diff --git a/include/linux/hdlc/Kbuild b/include/linux/hdlc/Kbuild index 1fb26448faa9..e69de29bb2d1 100644 --- a/include/linux/hdlc/Kbuild +++ b/include/linux/hdlc/Kbuild @@ -1 +0,0 @@ -header-y += ioctl.h diff --git a/include/linux/hdlc/ioctl.h b/include/linux/hdlc/ioctl.h deleted file mode 100644 index 583972364357..000000000000 --- a/include/linux/hdlc/ioctl.h +++ /dev/null @@ -1,81 +0,0 @@ -#ifndef __HDLC_IOCTL_H__ -#define __HDLC_IOCTL_H__ - - -#define GENERIC_HDLC_VERSION 4 /* For synchronization with sethdlc utility */ - -#define CLOCK_DEFAULT 0 /* Default setting */ -#define CLOCK_EXT 1 /* External TX and RX clock - DTE */ -#define CLOCK_INT 2 /* Internal TX and RX clock - DCE */ -#define CLOCK_TXINT 3 /* Internal TX and external RX clock */ -#define CLOCK_TXFROMRX 4 /* TX clock derived from external RX clock */ - - -#define ENCODING_DEFAULT 0 /* Default setting */ -#define ENCODING_NRZ 1 -#define ENCODING_NRZI 2 -#define ENCODING_FM_MARK 3 -#define ENCODING_FM_SPACE 4 -#define ENCODING_MANCHESTER 5 - - -#define PARITY_DEFAULT 0 /* Default setting */ -#define PARITY_NONE 1 /* No parity */ -#define PARITY_CRC16_PR0 2 /* CRC16, initial value 0x0000 */ -#define PARITY_CRC16_PR1 3 /* CRC16, initial value 0xFFFF */ -#define PARITY_CRC16_PR0_CCITT 4 /* CRC16, initial 0x0000, ITU-T version */ -#define PARITY_CRC16_PR1_CCITT 5 /* CRC16, initial 0xFFFF, ITU-T version */ -#define PARITY_CRC32_PR0_CCITT 6 /* CRC32, initial value 0x00000000 */ -#define PARITY_CRC32_PR1_CCITT 7 /* CRC32, initial value 0xFFFFFFFF */ - -#define LMI_DEFAULT 0 /* Default setting */ -#define LMI_NONE 1 /* No LMI, all PVCs are static */ -#define LMI_ANSI 2 /* ANSI Annex D */ -#define LMI_CCITT 3 /* ITU-T Annex A */ -#define LMI_CISCO 4 /* The "original" LMI, aka Gang of Four */ - -typedef struct { - unsigned int clock_rate; /* bits per second */ - unsigned int clock_type; /* internal, external, TX-internal etc. */ - unsigned short loopback; -} sync_serial_settings; /* V.35, V.24, X.21 */ - -typedef struct { - unsigned int clock_rate; /* bits per second */ - unsigned int clock_type; /* internal, external, TX-internal etc. */ - unsigned short loopback; - unsigned int slot_map; -} te1_settings; /* T1, E1 */ - -typedef struct { - unsigned short encoding; - unsigned short parity; -} raw_hdlc_proto; - -typedef struct { - unsigned int t391; - unsigned int t392; - unsigned int n391; - unsigned int n392; - unsigned int n393; - unsigned short lmi; - unsigned short dce; /* 1 for DCE (network side) operation */ -} fr_proto; - -typedef struct { - unsigned int dlci; -} fr_proto_pvc; /* for creating/deleting FR PVCs */ - -typedef struct { - unsigned int dlci; - char master[IFNAMSIZ]; /* Name of master FRAD device */ -}fr_proto_pvc_info; /* for returning PVC information only */ - -typedef struct { - unsigned int interval; - unsigned int timeout; -} cisco_proto; - -/* PPP doesn't need any info now - supply length = 0 to ioctl */ - -#endif /* __HDLC_IOCTL_H__ */ diff --git a/include/linux/hid-sensor-ids.h b/include/linux/hid-sensor-ids.h index ca8d7e94eb3c..55f277372fed 100644 --- a/include/linux/hid-sensor-ids.h +++ b/include/linux/hid-sensor-ids.h @@ -19,7 +19,6 @@ #ifndef _HID_SENSORS_IDS_H #define _HID_SENSORS_IDS_H -#define HID_UP_SENSOR 0x00200000 #define HID_MAX_PHY_DEVICES 0xFF /* Accel 3D (200073) */ diff --git a/include/linux/hid.h b/include/linux/hid.h index c076041a069e..7330a0fef0c0 100644 --- a/include/linux/hid.h +++ b/include/linux/hid.h @@ -167,6 +167,7 @@ struct hid_item { #define HID_UP_MSVENDOR 0xff000000 #define HID_UP_CUSTOM 0x00ff0000 #define HID_UP_LOGIVENDOR 0xffbc0000 +#define HID_UP_SENSOR 0x00200000 #define HID_USAGE 0x0000ffff @@ -292,6 +293,7 @@ struct hid_item { */ #define HID_GROUP_GENERIC 0x0001 #define HID_GROUP_MULTITOUCH 0x0002 +#define HID_GROUP_SENSOR_HUB 0x0003 /* * This is the global environment of the parser. This information is @@ -342,6 +344,7 @@ struct hid_collection { struct hid_usage { unsigned hid; /* hid usage code */ unsigned collection_index; /* index into collection array */ + unsigned usage_index; /* index into usage array */ /* hidinput data */ __u16 code; /* input driver code */ __u8 type; /* input driver type */ @@ -684,6 +687,7 @@ struct hid_ll_driver { extern int hid_debug; +extern bool hid_ignore(struct hid_device *); extern int hid_add_device(struct hid_device *); extern void hid_destroy_device(struct hid_device *); @@ -706,6 +710,7 @@ int hid_input_report(struct hid_device *, int type, u8 *, int, int); int hidinput_find_field(struct hid_device *hid, unsigned int type, unsigned int code, struct hid_field **field); struct hid_field *hidinput_get_led_field(struct hid_device *hid); unsigned int hidinput_count_leds(struct hid_device *hid); +__s32 hidinput_calc_abs_res(const struct hid_field *field, __u16 code); void hid_output_report(struct hid_report *report, __u8 *data); struct hid_device *hid_allocate_device(void); struct hid_report *hid_register_report(struct hid_device *device, unsigned type, unsigned id); @@ -716,6 +721,7 @@ int hid_connect(struct hid_device *hid, unsigned int connect_mask); void hid_disconnect(struct hid_device *hid); const struct hid_device_id *hid_match_id(struct hid_device *hdev, const struct hid_device_id *id); +s32 hid_snto32(__u32 value, unsigned n); /** * hid_map_usage - map usage input bits diff --git a/include/linux/huge_mm.h b/include/linux/huge_mm.h index b31cb7da0346..092dc5305a32 100644 --- a/include/linux/huge_mm.h +++ b/include/linux/huge_mm.h @@ -8,6 +8,10 @@ extern int do_huge_pmd_anonymous_page(struct mm_struct *mm, extern int copy_huge_pmd(struct mm_struct *dst_mm, struct mm_struct *src_mm, pmd_t *dst_pmd, pmd_t *src_pmd, unsigned long addr, struct vm_area_struct *vma); +extern void huge_pmd_set_accessed(struct mm_struct *mm, + struct vm_area_struct *vma, + unsigned long address, pmd_t *pmd, + pmd_t orig_pmd, int dirty); extern int do_huge_pmd_wp_page(struct mm_struct *mm, struct vm_area_struct *vma, unsigned long address, pmd_t *pmd, pmd_t orig_pmd); @@ -35,6 +39,7 @@ enum transparent_hugepage_flag { TRANSPARENT_HUGEPAGE_DEFRAG_FLAG, TRANSPARENT_HUGEPAGE_DEFRAG_REQ_MADV_FLAG, TRANSPARENT_HUGEPAGE_DEFRAG_KHUGEPAGED_FLAG, + TRANSPARENT_HUGEPAGE_USE_ZERO_PAGE_FLAG, #ifdef CONFIG_DEBUG_VM TRANSPARENT_HUGEPAGE_DEBUG_COW_FLAG, #endif @@ -74,6 +79,9 @@ extern bool is_vma_temporary_stack(struct vm_area_struct *vma); (transparent_hugepage_flags & \ (1<<TRANSPARENT_HUGEPAGE_DEFRAG_REQ_MADV_FLAG) && \ (__vma)->vm_flags & VM_HUGEPAGE)) +#define transparent_hugepage_use_zero_page() \ + (transparent_hugepage_flags & \ + (1<<TRANSPARENT_HUGEPAGE_USE_ZERO_PAGE_FLAG)) #ifdef CONFIG_DEBUG_VM #define transparent_hugepage_debug_cow() \ (transparent_hugepage_flags & \ @@ -91,12 +99,14 @@ extern int handle_pte_fault(struct mm_struct *mm, struct vm_area_struct *vma, unsigned long address, pte_t *pte, pmd_t *pmd, unsigned int flags); extern int split_huge_page(struct page *page); -extern void __split_huge_page_pmd(struct mm_struct *mm, pmd_t *pmd); -#define split_huge_page_pmd(__mm, __pmd) \ +extern void __split_huge_page_pmd(struct vm_area_struct *vma, + unsigned long address, pmd_t *pmd); +#define split_huge_page_pmd(__vma, __address, __pmd) \ do { \ pmd_t *____pmd = (__pmd); \ if (unlikely(pmd_trans_huge(*____pmd))) \ - __split_huge_page_pmd(__mm, ____pmd); \ + __split_huge_page_pmd(__vma, __address, \ + ____pmd); \ } while (0) #define wait_split_huge_page(__anon_vma, __pmd) \ do { \ @@ -106,6 +116,8 @@ extern void __split_huge_page_pmd(struct mm_struct *mm, pmd_t *pmd); BUG_ON(pmd_trans_splitting(*____pmd) || \ pmd_trans_huge(*____pmd)); \ } while (0) +extern void split_huge_page_pmd_mm(struct mm_struct *mm, unsigned long address, + pmd_t *pmd); #if HPAGE_PMD_ORDER > MAX_ORDER #error "hugepages can't be allocated by the buddy allocator" #endif @@ -173,10 +185,12 @@ static inline int split_huge_page(struct page *page) { return 0; } -#define split_huge_page_pmd(__mm, __pmd) \ +#define split_huge_page_pmd(__vma, __address, __pmd) \ do { } while (0) #define wait_split_huge_page(__anon_vma, __pmd) \ do { } while (0) +#define split_huge_page_pmd_mm(__mm, __address, __pmd) \ + do { } while (0) #define compound_trans_head(page) compound_head(page) static inline int hugepage_madvise(struct vm_area_struct *vma, unsigned long *vm_flags, int advice) diff --git a/include/linux/hugetlb.h b/include/linux/hugetlb.h index 225164842ab6..3e7fa1acf09c 100644 --- a/include/linux/hugetlb.h +++ b/include/linux/hugetlb.h @@ -183,7 +183,8 @@ extern const struct file_operations hugetlbfs_file_operations; extern const struct vm_operations_struct hugetlb_vm_ops; struct file *hugetlb_file_setup(const char *name, unsigned long addr, size_t size, vm_flags_t acct, - struct user_struct **user, int creat_flags); + struct user_struct **user, int creat_flags, + int page_size_log); static inline int is_file_hugepages(struct file *file) { @@ -195,12 +196,14 @@ static inline int is_file_hugepages(struct file *file) return 0; } + #else /* !CONFIG_HUGETLBFS */ #define is_file_hugepages(file) 0 static inline struct file * hugetlb_file_setup(const char *name, unsigned long addr, size_t size, - vm_flags_t acctflag, struct user_struct **user, int creat_flags) + vm_flags_t acctflag, struct user_struct **user, int creat_flags, + int page_size_log) { return ERR_PTR(-ENOSYS); } diff --git a/include/linux/hw_breakpoint.h b/include/linux/hw_breakpoint.h index 6ae9c631a1be..0464c85e63fd 100644 --- a/include/linux/hw_breakpoint.h +++ b/include/linux/hw_breakpoint.h @@ -1,35 +1,8 @@ #ifndef _LINUX_HW_BREAKPOINT_H #define _LINUX_HW_BREAKPOINT_H -enum { - HW_BREAKPOINT_LEN_1 = 1, - HW_BREAKPOINT_LEN_2 = 2, - HW_BREAKPOINT_LEN_4 = 4, - HW_BREAKPOINT_LEN_8 = 8, -}; - -enum { - HW_BREAKPOINT_EMPTY = 0, - HW_BREAKPOINT_R = 1, - HW_BREAKPOINT_W = 2, - HW_BREAKPOINT_RW = HW_BREAKPOINT_R | HW_BREAKPOINT_W, - HW_BREAKPOINT_X = 4, - HW_BREAKPOINT_INVALID = HW_BREAKPOINT_RW | HW_BREAKPOINT_X, -}; - -enum bp_type_idx { - TYPE_INST = 0, -#ifdef CONFIG_HAVE_MIXED_BREAKPOINTS_REGS - TYPE_DATA = 0, -#else - TYPE_DATA = 1, -#endif - TYPE_MAX -}; - -#ifdef __KERNEL__ - #include <linux/perf_event.h> +#include <uapi/linux/hw_breakpoint.h> #ifdef CONFIG_HAVE_HW_BREAKPOINT @@ -151,6 +124,4 @@ static inline struct arch_hw_breakpoint *counter_arch_bp(struct perf_event *bp) } #endif /* CONFIG_HAVE_HW_BREAKPOINT */ -#endif /* __KERNEL__ */ - #endif /* _LINUX_HW_BREAKPOINT_H */ diff --git a/include/linux/i2c.h b/include/linux/i2c.h index 800de224336b..d0c4db7b4872 100644 --- a/include/linux/i2c.h +++ b/include/linux/i2c.h @@ -259,6 +259,7 @@ static inline void i2c_set_clientdata(struct i2c_client *dev, void *data) * @platform_data: stored in i2c_client.dev.platform_data * @archdata: copied into i2c_client.dev.archdata * @of_node: pointer to OpenFirmware device node + * @acpi_node: ACPI device node * @irq: stored in i2c_client.irq * * I2C doesn't actually support hardware probing, although controllers and @@ -279,6 +280,7 @@ struct i2c_board_info { void *platform_data; struct dev_archdata *archdata; struct device_node *of_node; + struct acpi_dev_node acpi_node; int irq; }; @@ -501,4 +503,11 @@ static inline int i2c_adapter_id(struct i2c_adapter *adap) i2c_del_driver) #endif /* I2C */ + +#if IS_ENABLED(CONFIG_ACPI_I2C) +extern void acpi_i2c_register_devices(struct i2c_adapter *adap); +#else +static inline void acpi_i2c_register_devices(struct i2c_adapter *adap) {} +#endif + #endif /* _LINUX_I2C_H */ diff --git a/include/linux/i2c/i2c-hid.h b/include/linux/i2c/i2c-hid.h new file mode 100644 index 000000000000..60e411d764d4 --- /dev/null +++ b/include/linux/i2c/i2c-hid.h @@ -0,0 +1,35 @@ +/* + * HID over I2C protocol implementation + * + * Copyright (c) 2012 Benjamin Tissoires <benjamin.tissoires@gmail.com> + * Copyright (c) 2012 Ecole Nationale de l'Aviation Civile, France + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file COPYING in the main directory of this archive for + * more details. + */ + +#ifndef __LINUX_I2C_HID_H +#define __LINUX_I2C_HID_H + +#include <linux/types.h> + +/** + * struct i2chid_platform_data - used by hid over i2c implementation. + * @hid_descriptor_address: i2c register where the HID descriptor is stored. + * + * Note that it is the responsibility of the platform driver (or the acpi 5.0 + * driver) to setup the irq related to the gpio in the struct i2c_board_info. + * The platform driver should also setup the gpio according to the device: + * + * A typical example is the following: + * irq = gpio_to_irq(intr_gpio); + * hkdk4412_i2c_devs5[0].irq = irq; // store the irq in i2c_board_info + * gpio_request(intr_gpio, "elan-irq"); + * s3c_gpio_setpull(intr_gpio, S3C_GPIO_PULL_UP); + */ +struct i2c_hid_platform_data { + u16 hid_descriptor_address; +}; + +#endif /* __LINUX_I2C_HID_H */ diff --git a/include/linux/i2c/pcf857x.h b/include/linux/i2c/pcf857x.h index 781e6bd06c34..0767a2a6b2f1 100644 --- a/include/linux/i2c/pcf857x.h +++ b/include/linux/i2c/pcf857x.h @@ -10,7 +10,6 @@ * @setup: optional callback issued once the GPIOs are valid * @teardown: optional callback issued before the GPIOs are invalidated * @context: optional parameter passed to setup() and teardown() - * @irq: optional interrupt number * * In addition to the I2C_BOARD_INFO() state appropriate to each chip, * the i2c_board_info used with the pcf875x driver must provide its @@ -40,8 +39,6 @@ struct pcf857x_platform_data { int gpio, unsigned ngpio, void *context); void *context; - - int irq; }; #endif /* __LINUX_PCF857X_H */ diff --git a/include/linux/ieee80211.h b/include/linux/ieee80211.h index 2385119f8bb0..f0859cc73861 100644 --- a/include/linux/ieee80211.h +++ b/include/linux/ieee80211.h @@ -131,6 +131,8 @@ #define IEEE80211_MAX_MESH_ID_LEN 32 +#define IEEE80211_NUM_TIDS 16 + #define IEEE80211_QOS_CTL_LEN 2 /* 1d tag mask */ #define IEEE80211_QOS_CTL_TAG1D_MASK 0x0007 @@ -666,6 +668,21 @@ struct ieee80211_meshconf_ie { } __attribute__ ((packed)); /** + * enum mesh_config_capab_flags - Mesh Configuration IE capability field flags + * + * @IEEE80211_MESHCONF_CAPAB_ACCEPT_PLINKS: STA is willing to establish + * additional mesh peerings with other mesh STAs + * @IEEE80211_MESHCONF_CAPAB_FORWARDING: the STA forwards MSDUs + * @IEEE80211_MESHCONF_CAPAB_TBTT_ADJUSTING: TBTT adjustment procedure + * is ongoing + */ +enum mesh_config_capab_flags { + IEEE80211_MESHCONF_CAPAB_ACCEPT_PLINKS = 0x01, + IEEE80211_MESHCONF_CAPAB_FORWARDING = 0x08, + IEEE80211_MESHCONF_CAPAB_TBTT_ADJUSTING = 0x20, +}; + +/** * struct ieee80211_rann_ie * * This structure refers to "Root Announcement information element" @@ -905,6 +922,38 @@ struct ieee80211_tdls_data { } u; } __packed; +/* + * Peer-to-Peer IE attribute related definitions. + */ +/** + * enum ieee80211_p2p_attr_id - identifies type of peer-to-peer attribute. + */ +enum ieee80211_p2p_attr_id { + IEEE80211_P2P_ATTR_STATUS = 0, + IEEE80211_P2P_ATTR_MINOR_REASON, + IEEE80211_P2P_ATTR_CAPABILITY, + IEEE80211_P2P_ATTR_DEVICE_ID, + IEEE80211_P2P_ATTR_GO_INTENT, + IEEE80211_P2P_ATTR_GO_CONFIG_TIMEOUT, + IEEE80211_P2P_ATTR_LISTEN_CHANNEL, + IEEE80211_P2P_ATTR_GROUP_BSSID, + IEEE80211_P2P_ATTR_EXT_LISTEN_TIMING, + IEEE80211_P2P_ATTR_INTENDED_IFACE_ADDR, + IEEE80211_P2P_ATTR_MANAGABILITY, + IEEE80211_P2P_ATTR_CHANNEL_LIST, + IEEE80211_P2P_ATTR_ABSENCE_NOTICE, + IEEE80211_P2P_ATTR_DEVICE_INFO, + IEEE80211_P2P_ATTR_GROUP_INFO, + IEEE80211_P2P_ATTR_GROUP_ID, + IEEE80211_P2P_ATTR_INTERFACE, + IEEE80211_P2P_ATTR_OPER_CHANNEL, + IEEE80211_P2P_ATTR_INVITE_FLAGS, + /* 19 - 220: Reserved */ + IEEE80211_P2P_ATTR_VENDOR_SPECIFIC = 221, + + IEEE80211_P2P_ATTR_MAX +}; + /** * struct ieee80211_bar - HT Block Ack Request * @@ -1107,20 +1156,6 @@ struct ieee80211_ht_operation { #define WLAN_HT_SMPS_CONTROL_STATIC 1 #define WLAN_HT_SMPS_CONTROL_DYNAMIC 3 -#define VHT_MCS_SUPPORTED_SET_SIZE 8 - -struct ieee80211_vht_capabilities { - __le32 vht_capabilities_info; - u8 vht_supported_mcs_set[VHT_MCS_SUPPORTED_SET_SIZE]; -} __packed; - -struct ieee80211_vht_operation { - u8 vht_op_info_chwidth; - u8 vht_op_info_chan_center_freq_seg1_idx; - u8 vht_op_info_chan_center_freq_seg2_idx; - __le16 vht_basic_mcs_set; -} __packed; - /** * struct ieee80211_vht_mcs_info - VHT MCS information * @rx_mcs_map: RX MCS map 2 bits for each stream, total 8 streams @@ -1128,11 +1163,13 @@ struct ieee80211_vht_operation { * STA can receive. Rate expressed in units of 1 Mbps. * If this field is 0 this value should not be used to * consider the highest RX data rate supported. + * The top 3 bits of this field are reserved. * @tx_mcs_map: TX MCS map 2 bits for each stream, total 8 streams * @tx_highest: Indicates highest long GI VHT PPDU data rate * STA can transmit. Rate expressed in units of 1 Mbps. * If this field is 0 this value should not be used to * consider the highest TX data rate supported. + * The top 3 bits of this field are reserved. */ struct ieee80211_vht_mcs_info { __le16 rx_mcs_map; @@ -1141,38 +1178,107 @@ struct ieee80211_vht_mcs_info { __le16 tx_highest; } __packed; +/** + * enum ieee80211_vht_mcs_support - VHT MCS support definitions + * @IEEE80211_VHT_MCS_SUPPORT_0_7: MCSes 0-7 are supported for the + * number of streams + * @IEEE80211_VHT_MCS_SUPPORT_0_8: MCSes 0-8 are supported + * @IEEE80211_VHT_MCS_SUPPORT_0_9: MCSes 0-9 are supported + * @IEEE80211_VHT_MCS_NOT_SUPPORTED: This number of streams isn't supported + * + * These definitions are used in each 2-bit subfield of the @rx_mcs_map + * and @tx_mcs_map fields of &struct ieee80211_vht_mcs_info, which are + * both split into 8 subfields by number of streams. These values indicate + * which MCSes are supported for the number of streams the value appears + * for. + */ +enum ieee80211_vht_mcs_support { + IEEE80211_VHT_MCS_SUPPORT_0_7 = 0, + IEEE80211_VHT_MCS_SUPPORT_0_8 = 1, + IEEE80211_VHT_MCS_SUPPORT_0_9 = 2, + IEEE80211_VHT_MCS_NOT_SUPPORTED = 3, +}; + +/** + * struct ieee80211_vht_cap - VHT capabilities + * + * This structure is the "VHT capabilities element" as + * described in 802.11ac D3.0 8.4.2.160 + * @vht_cap_info: VHT capability info + * @supp_mcs: VHT MCS supported rates + */ +struct ieee80211_vht_cap { + __le32 vht_cap_info; + struct ieee80211_vht_mcs_info supp_mcs; +} __packed; + +/** + * enum ieee80211_vht_chanwidth - VHT channel width + * @IEEE80211_VHT_CHANWIDTH_USE_HT: use the HT operation IE to + * determine the channel width (20 or 40 MHz) + * @IEEE80211_VHT_CHANWIDTH_80MHZ: 80 MHz bandwidth + * @IEEE80211_VHT_CHANWIDTH_160MHZ: 160 MHz bandwidth + * @IEEE80211_VHT_CHANWIDTH_80P80MHZ: 80+80 MHz bandwidth + */ +enum ieee80211_vht_chanwidth { + IEEE80211_VHT_CHANWIDTH_USE_HT = 0, + IEEE80211_VHT_CHANWIDTH_80MHZ = 1, + IEEE80211_VHT_CHANWIDTH_160MHZ = 2, + IEEE80211_VHT_CHANWIDTH_80P80MHZ = 3, +}; + +/** + * struct ieee80211_vht_operation - VHT operation IE + * + * This structure is the "VHT operation element" as + * described in 802.11ac D3.0 8.4.2.161 + * @chan_width: Operating channel width + * @center_freq_seg1_idx: center freq segment 1 index + * @center_freq_seg2_idx: center freq segment 2 index + * @basic_mcs_set: VHT Basic MCS rate set + */ +struct ieee80211_vht_operation { + u8 chan_width; + u8 center_freq_seg1_idx; + u8 center_freq_seg2_idx; + __le16 basic_mcs_set; +} __packed; + + #define IEEE80211_VHT_MCS_ZERO_TO_SEVEN_SUPPORT 0 #define IEEE80211_VHT_MCS_ZERO_TO_EIGHT_SUPPORT 1 #define IEEE80211_VHT_MCS_ZERO_TO_NINE_SUPPORT 2 #define IEEE80211_VHT_MCS_NOT_SUPPORTED 3 /* 802.11ac VHT Capabilities */ -#define IEEE80211_VHT_CAP_MAX_MPDU_LENGTH_3895 0x00000000 -#define IEEE80211_VHT_CAP_MAX_MPDU_LENGTH_7991 0x00000001 -#define IEEE80211_VHT_CAP_MAX_MPDU_LENGTH_11454 0x00000002 -#define IEEE80211_VHT_CAP_SUPP_CHAN_WIDTH_160MHZ 0x00000004 -#define IEEE80211_VHT_CAP_SUPP_CHAN_WIDTH_160_80PLUS80MHZ 0x00000008 -#define IEEE80211_VHT_CAP_RXLDPC 0x00000010 -#define IEEE80211_VHT_CAP_SHORT_GI_80 0x00000020 -#define IEEE80211_VHT_CAP_SHORT_GI_160 0x00000040 -#define IEEE80211_VHT_CAP_TXSTBC 0x00000080 -#define IEEE80211_VHT_CAP_RXSTBC_1 0x00000100 -#define IEEE80211_VHT_CAP_RXSTBC_2 0x00000200 -#define IEEE80211_VHT_CAP_RXSTBC_3 0x00000300 -#define IEEE80211_VHT_CAP_RXSTBC_4 0x00000400 -#define IEEE80211_VHT_CAP_SU_BEAMFORMER_CAPABLE 0x00000800 -#define IEEE80211_VHT_CAP_SU_BEAMFORMEE_CAPABLE 0x00001000 -#define IEEE80211_VHT_CAP_BEAMFORMER_ANTENNAS_MAX 0x00006000 -#define IEEE80211_VHT_CAP_SOUNDING_DIMENTION_MAX 0x00030000 -#define IEEE80211_VHT_CAP_MU_BEAMFORMER_CAPABLE 0x00080000 -#define IEEE80211_VHT_CAP_MU_BEAMFORMEE_CAPABLE 0x00100000 -#define IEEE80211_VHT_CAP_VHT_TXOP_PS 0x00200000 -#define IEEE80211_VHT_CAP_HTC_VHT 0x00400000 -#define IEEE80211_VHT_CAP_MAX_A_MPDU_LENGTH_EXPONENT 0x00800000 -#define IEEE80211_VHT_CAP_VHT_LINK_ADAPTATION_VHT_UNSOL_MFB 0x08000000 -#define IEEE80211_VHT_CAP_VHT_LINK_ADAPTATION_VHT_MRQ_MFB 0x0c000000 -#define IEEE80211_VHT_CAP_RX_ANTENNA_PATTERN 0x10000000 -#define IEEE80211_VHT_CAP_TX_ANTENNA_PATTERN 0x20000000 +#define IEEE80211_VHT_CAP_MAX_MPDU_LENGTH_3895 0x00000000 +#define IEEE80211_VHT_CAP_MAX_MPDU_LENGTH_7991 0x00000001 +#define IEEE80211_VHT_CAP_MAX_MPDU_LENGTH_11454 0x00000002 +#define IEEE80211_VHT_CAP_SUPP_CHAN_WIDTH_160MHZ 0x00000004 +#define IEEE80211_VHT_CAP_SUPP_CHAN_WIDTH_160_80PLUS80MHZ 0x00000008 +#define IEEE80211_VHT_CAP_RXLDPC 0x00000010 +#define IEEE80211_VHT_CAP_SHORT_GI_80 0x00000020 +#define IEEE80211_VHT_CAP_SHORT_GI_160 0x00000040 +#define IEEE80211_VHT_CAP_TXSTBC 0x00000080 +#define IEEE80211_VHT_CAP_RXSTBC_1 0x00000100 +#define IEEE80211_VHT_CAP_RXSTBC_2 0x00000200 +#define IEEE80211_VHT_CAP_RXSTBC_3 0x00000300 +#define IEEE80211_VHT_CAP_RXSTBC_4 0x00000400 +#define IEEE80211_VHT_CAP_SU_BEAMFORMER_CAPABLE 0x00000800 +#define IEEE80211_VHT_CAP_SU_BEAMFORMEE_CAPABLE 0x00001000 +#define IEEE80211_VHT_CAP_BEAMFORMER_ANTENNAS_MAX 0x00006000 +#define IEEE80211_VHT_CAP_SOUNDING_DIMENTION_MAX 0x00030000 +#define IEEE80211_VHT_CAP_MU_BEAMFORMER_CAPABLE 0x00080000 +#define IEEE80211_VHT_CAP_MU_BEAMFORMEE_CAPABLE 0x00100000 +#define IEEE80211_VHT_CAP_VHT_TXOP_PS 0x00200000 +#define IEEE80211_VHT_CAP_HTC_VHT 0x00400000 +#define IEEE80211_VHT_CAP_MAX_A_MPDU_LENGTH_EXPONENT_SHIFT 23 +#define IEEE80211_VHT_CAP_MAX_A_MPDU_LENGTH_EXPONENT_MASK \ + (7 << IEEE80211_VHT_CAP_MAX_A_MPDU_LENGTH_EXPONENT_SHIFT) +#define IEEE80211_VHT_CAP_VHT_LINK_ADAPTATION_VHT_UNSOL_MFB 0x08000000 +#define IEEE80211_VHT_CAP_VHT_LINK_ADAPTATION_VHT_MRQ_MFB 0x0c000000 +#define IEEE80211_VHT_CAP_RX_ANTENNA_PATTERN 0x10000000 +#define IEEE80211_VHT_CAP_TX_ANTENNA_PATTERN 0x20000000 /* Authentication algorithms */ #define WLAN_AUTH_OPEN 0 @@ -1440,8 +1546,6 @@ enum ieee80211_eid { WLAN_EID_RSN = 48, WLAN_EID_MMIE = 76, - WLAN_EID_WPA = 221, - WLAN_EID_GENERIC = 221, WLAN_EID_VENDOR_SPECIFIC = 221, WLAN_EID_QOS_PARAMETER = 222, diff --git a/include/linux/if_tunnel.h b/include/linux/if_tunnel.h index 1cc595a67cc9..f4e56ecd0b1a 100644 --- a/include/linux/if_tunnel.h +++ b/include/linux/if_tunnel.h @@ -4,5 +4,22 @@ #include <linux/ip.h> #include <linux/in6.h> #include <uapi/linux/if_tunnel.h> +#include <linux/u64_stats_sync.h> + +/* + * Locking : hash tables are protected by RCU and RTNL + */ + +#define for_each_ip_tunnel_rcu(pos, start) \ + for (pos = rcu_dereference(start); pos; pos = rcu_dereference(pos->next)) + +/* often modified stats are per cpu, other are shared (netdev->stats) */ +struct pcpu_tstats { + u64 rx_packets; + u64 rx_bytes; + u64 tx_packets; + u64 tx_bytes; + struct u64_stats_sync syncp; +}; #endif /* _IF_TUNNEL_H_ */ diff --git a/include/linux/iio/buffer.h b/include/linux/iio/buffer.h index c629b3a1d9a9..f3eea18fdf46 100644 --- a/include/linux/iio/buffer.h +++ b/include/linux/iio/buffer.h @@ -66,7 +66,8 @@ struct iio_buffer_access_funcs { * @stufftoread: [INTERN] flag to indicate new data. * @demux_list: [INTERN] list of operations required to demux the scan. * @demux_bounce: [INTERN] buffer for doing gather from incoming scan. - **/ + * @buffer_list: [INTERN] entry in the devices list of current buffers. + */ struct iio_buffer { int length; int bytes_per_datum; @@ -81,9 +82,22 @@ struct iio_buffer { const struct attribute_group *attrs; struct list_head demux_list; unsigned char *demux_bounce; + struct list_head buffer_list; }; /** + * iio_update_buffers() - add or remove buffer from active list + * @indio_dev: device to add buffer to + * @insert_buffer: buffer to insert + * @remove_buffer: buffer_to_remove + * + * Note this will tear down the all buffering and build it up again + */ +int iio_update_buffers(struct iio_dev *indio_dev, + struct iio_buffer *insert_buffer, + struct iio_buffer *remove_buffer); + +/** * iio_buffer_init() - Initialize the buffer structure * @buffer: buffer to be initialized **/ @@ -115,11 +129,11 @@ int iio_scan_mask_set(struct iio_dev *indio_dev, struct iio_buffer *buffer, int bit); /** - * iio_push_to_buffer() - push to a registered buffer. - * @buffer: IIO buffer structure for device - * @data: the data to push to the buffer + * iio_push_to_buffers() - push to a registered buffer. + * @indio_dev: iio_dev structure for device. + * @data: Full scan. */ -int iio_push_to_buffer(struct iio_buffer *buffer, unsigned char *data); +int iio_push_to_buffers(struct iio_dev *indio_dev, unsigned char *data); int iio_update_demux(struct iio_dev *indio_dev); @@ -181,7 +195,7 @@ bool iio_validate_scan_mask_onehot(struct iio_dev *indio_dev, #else /* CONFIG_IIO_BUFFER */ static inline int iio_buffer_register(struct iio_dev *indio_dev, - struct iio_chan_spec *channels, + const struct iio_chan_spec *channels, int num_channels) { return 0; diff --git a/include/linux/iio/consumer.h b/include/linux/iio/consumer.h index e875bcf0478f..16c35ac045bd 100644 --- a/include/linux/iio/consumer.h +++ b/include/linux/iio/consumer.h @@ -9,6 +9,8 @@ */ #ifndef _IIO_INKERN_CONSUMER_H_ #define _IIO_INKERN_CONSUMER_H_ + +#include <linux/types.h> #include <linux/iio/types.h> struct iio_dev; @@ -18,10 +20,12 @@ struct iio_chan_spec; * struct iio_channel - everything needed for a consumer to use a channel * @indio_dev: Device on which the channel exists. * @channel: Full description of the channel. + * @data: Data about the channel used by consumer. */ struct iio_channel { struct iio_dev *indio_dev; const struct iio_chan_spec *channel; + void *data; }; /** @@ -59,6 +63,52 @@ struct iio_channel *iio_channel_get_all(const char *name); */ void iio_channel_release_all(struct iio_channel *chan); +struct iio_cb_buffer; +/** + * iio_channel_get_all_cb() - register callback for triggered capture + * @name: Name of client device. + * @cb: Callback function. + * @private: Private data passed to callback. + * + * NB right now we have no ability to mux data from multiple devices. + * So if the channels requested come from different devices this will + * fail. + */ +struct iio_cb_buffer *iio_channel_get_all_cb(const char *name, + int (*cb)(u8 *data, + void *private), + void *private); +/** + * iio_channel_release_all_cb() - release and unregister the callback. + * @cb_buffer: The callback buffer that was allocated. + */ +void iio_channel_release_all_cb(struct iio_cb_buffer *cb_buffer); + +/** + * iio_channel_start_all_cb() - start the flow of data through callback. + * @cb_buff: The callback buffer we are starting. + */ +int iio_channel_start_all_cb(struct iio_cb_buffer *cb_buff); + +/** + * iio_channel_stop_all_cb() - stop the flow of data through the callback. + * @cb_buff: The callback buffer we are stopping. + */ +void iio_channel_stop_all_cb(struct iio_cb_buffer *cb_buff); + +/** + * iio_channel_cb_get_channels() - get access to the underlying channels. + * @cb_buff: The callback buffer from whom we want the channel + * information. + * + * This function allows one to obtain information about the channels. + * Whilst this may allow direct reading if all buffers are disabled, the + * primary aim is to allow drivers that are consuming a channel to query + * things like scaling of the channel. + */ +struct iio_channel +*iio_channel_cb_get_channels(const struct iio_cb_buffer *cb_buffer); + /** * iio_read_channel_raw() - read from a given channel * @chan: The channel being queried. diff --git a/include/linux/iio/iio.h b/include/linux/iio/iio.h index 7806c24e5bc8..da8c776ba0bd 100644 --- a/include/linux/iio/iio.h +++ b/include/linux/iio/iio.h @@ -410,6 +410,7 @@ struct iio_buffer_setup_ops { * and owner * @event_interface: [INTERN] event chrdevs associated with interrupt lines * @buffer: [DRIVER] any buffer present + * @buffer_list: [INTERN] list of all buffers currently attached * @scan_bytes: [INTERN] num bytes captured to be fed to buffer demux * @mlock: [INTERN] lock used to prevent simultaneous device state * changes @@ -448,6 +449,7 @@ struct iio_dev { struct iio_event_interface *event_interface; struct iio_buffer *buffer; + struct list_head buffer_list; int scan_bytes; struct mutex mlock; @@ -618,6 +620,9 @@ static inline struct dentry *iio_get_debugfs_dentry(struct iio_dev *indio_dev) }; #endif +int iio_str_to_fixpoint(const char *str, int fract_mult, int *integer, + int *fract); + /** * IIO_DEGREE_TO_RAD() - Convert degree to rad * @deg: A value in degree diff --git a/include/linux/iio/imu/adis.h b/include/linux/iio/imu/adis.h new file mode 100644 index 000000000000..ff781dca2e9a --- /dev/null +++ b/include/linux/iio/imu/adis.h @@ -0,0 +1,280 @@ +/* + * Common library for ADIS16XXX devices + * + * Copyright 2012 Analog Devices Inc. + * Author: Lars-Peter Clausen <lars@metafoo.de> + * + * Licensed under the GPL-2 or later. + */ + +#ifndef __IIO_ADIS_H__ +#define __IIO_ADIS_H__ + +#include <linux/spi/spi.h> +#include <linux/interrupt.h> +#include <linux/iio/types.h> + +#define ADIS_WRITE_REG(reg) ((0x80 | (reg))) +#define ADIS_READ_REG(reg) ((reg) & 0x7f) + +#define ADIS_PAGE_SIZE 0x80 +#define ADIS_REG_PAGE_ID 0x00 + +struct adis; + +/** + * struct adis_data - ADIS chip variant specific data + * @read_delay: SPI delay for read operations in us + * @write_delay: SPI delay for write operations in us + * @glob_cmd_reg: Register address of the GLOB_CMD register + * @msc_ctrl_reg: Register address of the MSC_CTRL register + * @diag_stat_reg: Register address of the DIAG_STAT register + * @status_error_msgs: Array of error messgaes + * @status_error_mask: + */ +struct adis_data { + unsigned int read_delay; + unsigned int write_delay; + + unsigned int glob_cmd_reg; + unsigned int msc_ctrl_reg; + unsigned int diag_stat_reg; + + unsigned int self_test_mask; + unsigned int startup_delay; + + const char * const *status_error_msgs; + unsigned int status_error_mask; + + int (*enable_irq)(struct adis *adis, bool enable); + + bool has_paging; +}; + +struct adis { + struct spi_device *spi; + struct iio_trigger *trig; + + const struct adis_data *data; + + struct mutex txrx_lock; + struct spi_message msg; + struct spi_transfer *xfer; + unsigned int current_page; + void *buffer; + + uint8_t tx[10] ____cacheline_aligned; + uint8_t rx[4]; +}; + +int adis_init(struct adis *adis, struct iio_dev *indio_dev, + struct spi_device *spi, const struct adis_data *data); +int adis_reset(struct adis *adis); + +int adis_write_reg(struct adis *adis, unsigned int reg, + unsigned int val, unsigned int size); +int adis_read_reg(struct adis *adis, unsigned int reg, + unsigned int *val, unsigned int size); + +/** + * adis_write_reg_8() - Write single byte to a register + * @adis: The adis device + * @reg: The address of the register to be written + * @value: The value to write + */ +static inline int adis_write_reg_8(struct adis *adis, unsigned int reg, + uint8_t val) +{ + return adis_write_reg(adis, reg, val, 1); +} + +/** + * adis_write_reg_16() - Write 2 bytes to a pair of registers + * @adis: The adis device + * @reg: The address of the lower of the two registers + * @value: Value to be written + */ +static inline int adis_write_reg_16(struct adis *adis, unsigned int reg, + uint16_t val) +{ + return adis_write_reg(adis, reg, val, 2); +} + +/** + * adis_write_reg_32() - write 4 bytes to four registers + * @adis: The adis device + * @reg: The address of the lower of the four register + * @value: Value to be written + */ +static inline int adis_write_reg_32(struct adis *adis, unsigned int reg, + uint32_t val) +{ + return adis_write_reg(adis, reg, val, 4); +} + +/** + * adis_read_reg_16() - read 2 bytes from a 16-bit register + * @adis: The adis device + * @reg: The address of the lower of the two registers + * @val: The value read back from the device + */ +static inline int adis_read_reg_16(struct adis *adis, unsigned int reg, + uint16_t *val) +{ + unsigned int tmp; + int ret; + + ret = adis_read_reg(adis, reg, &tmp, 2); + *val = tmp; + + return ret; +} + +/** + * adis_read_reg_32() - read 4 bytes from a 32-bit register + * @adis: The adis device + * @reg: The address of the lower of the two registers + * @val: The value read back from the device + */ +static inline int adis_read_reg_32(struct adis *adis, unsigned int reg, + uint32_t *val) +{ + unsigned int tmp; + int ret; + + ret = adis_read_reg(adis, reg, &tmp, 4); + *val = tmp; + + return ret; +} + +int adis_enable_irq(struct adis *adis, bool enable); +int adis_check_status(struct adis *adis); + +int adis_initial_startup(struct adis *adis); + +int adis_single_conversion(struct iio_dev *indio_dev, + const struct iio_chan_spec *chan, unsigned int error_mask, + int *val); + +#define ADIS_VOLTAGE_CHAN(addr, si, chan, name, bits) { \ + .type = IIO_VOLTAGE, \ + .indexed = 1, \ + .channel = (chan), \ + .extend_name = name, \ + .info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT | \ + IIO_CHAN_INFO_SCALE_SEPARATE_BIT, \ + .address = (addr), \ + .scan_index = (si), \ + .scan_type = { \ + .sign = 'u', \ + .realbits = (bits), \ + .storagebits = 16, \ + .endianness = IIO_BE, \ + }, \ +} + +#define ADIS_SUPPLY_CHAN(addr, si, bits) \ + ADIS_VOLTAGE_CHAN(addr, si, 0, "supply", bits) + +#define ADIS_AUX_ADC_CHAN(addr, si, bits) \ + ADIS_VOLTAGE_CHAN(addr, si, 1, NULL, bits) + +#define ADIS_TEMP_CHAN(addr, si, bits) { \ + .type = IIO_TEMP, \ + .indexed = 1, \ + .channel = 0, \ + .info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT | \ + IIO_CHAN_INFO_SCALE_SEPARATE_BIT | \ + IIO_CHAN_INFO_OFFSET_SEPARATE_BIT, \ + .address = (addr), \ + .scan_index = (si), \ + .scan_type = { \ + .sign = 'u', \ + .realbits = (bits), \ + .storagebits = 16, \ + .endianness = IIO_BE, \ + }, \ +} + +#define ADIS_MOD_CHAN(_type, mod, addr, si, info, bits) { \ + .type = (_type), \ + .modified = 1, \ + .channel2 = IIO_MOD_ ## mod, \ + .info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT | \ + IIO_CHAN_INFO_SCALE_SHARED_BIT | \ + info, \ + .address = (addr), \ + .scan_index = (si), \ + .scan_type = { \ + .sign = 's', \ + .realbits = (bits), \ + .storagebits = 16, \ + .endianness = IIO_BE, \ + }, \ +} + +#define ADIS_ACCEL_CHAN(mod, addr, si, info, bits) \ + ADIS_MOD_CHAN(IIO_ACCEL, mod, addr, si, info, bits) + +#define ADIS_GYRO_CHAN(mod, addr, si, info, bits) \ + ADIS_MOD_CHAN(IIO_ANGL_VEL, mod, addr, si, info, bits) + +#define ADIS_INCLI_CHAN(mod, addr, si, info, bits) \ + ADIS_MOD_CHAN(IIO_INCLI, mod, addr, si, info, bits) + +#define ADIS_ROT_CHAN(mod, addr, si, info, bits) \ + ADIS_MOD_CHAN(IIO_ROT, mod, addr, si, info, bits) + +#ifdef CONFIG_IIO_ADIS_LIB_BUFFER + +int adis_setup_buffer_and_trigger(struct adis *adis, + struct iio_dev *indio_dev, irqreturn_t (*trigger_handler)(int, void *)); +void adis_cleanup_buffer_and_trigger(struct adis *adis, + struct iio_dev *indio_dev); + +int adis_probe_trigger(struct adis *adis, struct iio_dev *indio_dev); +void adis_remove_trigger(struct adis *adis); + +int adis_update_scan_mode(struct iio_dev *indio_dev, + const unsigned long *scan_mask); + +#else /* CONFIG_IIO_BUFFER */ + +static inline int adis_setup_buffer_and_trigger(struct adis *adis, + struct iio_dev *indio_dev, irqreturn_t (*trigger_handler)(int, void *)) +{ + return 0; +} + +static inline void adis_cleanup_buffer_and_trigger(struct adis *adis, + struct iio_dev *indio_dev) +{ +} + +static inline int adis_probe_trigger(struct adis *adis, + struct iio_dev *indio_dev) +{ + return 0; +} + +static inline void adis_remove_trigger(struct adis *adis) +{ +} + +#define adis_update_scan_mode NULL + +#endif /* CONFIG_IIO_BUFFER */ + +#ifdef CONFIG_DEBUG_FS + +int adis_debugfs_reg_access(struct iio_dev *indio_dev, + unsigned int reg, unsigned int writeval, unsigned int *readval); + +#else + +#define adis_debugfs_reg_access NULL + +#endif + +#endif diff --git a/include/linux/iio/machine.h b/include/linux/iio/machine.h index 809a3f08d5a5..1601a2a63a72 100644 --- a/include/linux/iio/machine.h +++ b/include/linux/iio/machine.h @@ -19,11 +19,13 @@ * @consumer_dev_name: Name to uniquely identify the consumer device. * @consumer_channel: Unique name used to identify the channel on the * consumer side. + * @consumer_data: Data about the channel for use by the consumer driver. */ struct iio_map { const char *adc_channel_label; const char *consumer_dev_name; const char *consumer_channel; + void *consumer_data; }; #endif diff --git a/include/linux/iio/types.h b/include/linux/iio/types.h index 5c647ecfd5ba..88bf0f0d27b4 100644 --- a/include/linux/iio/types.h +++ b/include/linux/iio/types.h @@ -28,6 +28,7 @@ enum iio_chan_type { IIO_CAPACITANCE, IIO_ALTVOLTAGE, IIO_CCT, + IIO_PRESSURE, }; enum iio_modifier { @@ -58,5 +59,6 @@ enum iio_modifier { #define IIO_VAL_INT_PLUS_NANO 3 #define IIO_VAL_INT_PLUS_MICRO_DB 4 #define IIO_VAL_FRACTIONAL 10 +#define IIO_VAL_FRACTIONAL_LOG2 11 #endif /* _IIO_TYPES_H_ */ diff --git a/include/linux/inetdevice.h b/include/linux/inetdevice.h index d032780d0ce5..a9d828976a77 100644 --- a/include/linux/inetdevice.h +++ b/include/linux/inetdevice.h @@ -171,6 +171,9 @@ struct in_ifaddr { extern int register_inetaddr_notifier(struct notifier_block *nb); extern int unregister_inetaddr_notifier(struct notifier_block *nb); +extern void inet_netconf_notify_devconf(struct net *net, int type, int ifindex, + struct ipv4_devconf *devconf); + extern struct net_device *__ip_dev_find(struct net *net, __be32 addr, bool devref); static inline struct net_device *ip_dev_find(struct net *net, __be32 addr) { diff --git a/include/linux/init.h b/include/linux/init.h index e59041e21df3..f63692d6902e 100644 --- a/include/linux/init.h +++ b/include/linux/init.h @@ -93,13 +93,13 @@ #define __exit __section(.exit.text) __exitused __cold notrace -/* Used for HOTPLUG */ -#define __devinit __section(.devinit.text) __cold notrace -#define __devinitdata __section(.devinit.data) -#define __devinitconst __constsection(.devinit.rodata) -#define __devexit __section(.devexit.text) __exitused __cold notrace -#define __devexitdata __section(.devexit.data) -#define __devexitconst __constsection(.devexit.rodata) +/* Used for HOTPLUG, but that is always enabled now, so just make them noops */ +#define __devinit +#define __devinitdata +#define __devinitconst +#define __devexit +#define __devexitdata +#define __devexitconst /* Used for HOTPLUG_CPU */ #define __cpuinit __section(.cpuinit.text) __cold notrace @@ -126,10 +126,6 @@ #define __INITRODATA .section ".init.rodata","a",%progbits #define __FINITDATA .previous -#define __DEVINIT .section ".devinit.text", "ax" -#define __DEVINITDATA .section ".devinit.data", "aw" -#define __DEVINITRODATA .section ".devinit.rodata", "a" - #define __CPUINIT .section ".cpuinit.text", "ax" #define __CPUINITDATA .section ".cpuinit.data", "aw" #define __CPUINITRODATA .section ".cpuinit.rodata", "a" diff --git a/include/linux/input/mt.h b/include/linux/input/mt.h index cc5cca774bab..2e86bd0bfba1 100644 --- a/include/linux/input/mt.h +++ b/include/linux/input/mt.h @@ -69,6 +69,12 @@ static inline bool input_mt_is_active(const struct input_mt_slot *slot) return input_mt_get_value(slot, ABS_MT_TRACKING_ID) >= 0; } +static inline bool input_mt_is_used(const struct input_mt *mt, + const struct input_mt_slot *slot) +{ + return slot->frame == mt->frame; +} + int input_mt_init_slots(struct input_dev *dev, unsigned int num_slots, unsigned int flags); void input_mt_destroy_slots(struct input_dev *dev); diff --git a/include/linux/ip.h b/include/linux/ip.h index 58b82a22a52b..492bc6513533 100644 --- a/include/linux/ip.h +++ b/include/linux/ip.h @@ -25,6 +25,11 @@ static inline struct iphdr *ip_hdr(const struct sk_buff *skb) return (struct iphdr *)skb_network_header(skb); } +static inline struct iphdr *inner_ip_hdr(const struct sk_buff *skb) +{ + return (struct iphdr *)skb_inner_network_header(skb); +} + static inline struct iphdr *ipip_hdr(const struct sk_buff *skb) { return (struct iphdr *)skb_transport_header(skb); diff --git a/include/linux/ipack.h b/include/linux/ipack.h new file mode 100644 index 000000000000..fea12cbb2aeb --- /dev/null +++ b/include/linux/ipack.h @@ -0,0 +1,245 @@ +/* + * Industry-pack bus. + * + * Copyright (C) 2011-2012 CERN (www.cern.ch) + * Author: Samuel Iglesias Gonsalvez <siglesias@igalia.com> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the Free + * Software Foundation; version 2 of the License. + */ + +#include <linux/mod_devicetable.h> +#include <linux/device.h> +#include <linux/interrupt.h> + +#define IPACK_IDPROM_OFFSET_I 0x01 +#define IPACK_IDPROM_OFFSET_P 0x03 +#define IPACK_IDPROM_OFFSET_A 0x05 +#define IPACK_IDPROM_OFFSET_C 0x07 +#define IPACK_IDPROM_OFFSET_MANUFACTURER_ID 0x09 +#define IPACK_IDPROM_OFFSET_MODEL 0x0B +#define IPACK_IDPROM_OFFSET_REVISION 0x0D +#define IPACK_IDPROM_OFFSET_RESERVED 0x0F +#define IPACK_IDPROM_OFFSET_DRIVER_ID_L 0x11 +#define IPACK_IDPROM_OFFSET_DRIVER_ID_H 0x13 +#define IPACK_IDPROM_OFFSET_NUM_BYTES 0x15 +#define IPACK_IDPROM_OFFSET_CRC 0x17 + +/* + * IndustryPack Fromat, Vendor and Device IDs. + */ + +/* ID section format versions */ +#define IPACK_ID_VERSION_INVALID 0x00 +#define IPACK_ID_VERSION_1 0x01 +#define IPACK_ID_VERSION_2 0x02 + +/* Vendors and devices. Sort key: vendor first, device next. */ +#define IPACK1_VENDOR_ID_RESERVED1 0x00 +#define IPACK1_VENDOR_ID_RESERVED2 0xFF +#define IPACK1_VENDOR_ID_UNREGISTRED01 0x01 +#define IPACK1_VENDOR_ID_UNREGISTRED02 0x02 +#define IPACK1_VENDOR_ID_UNREGISTRED03 0x03 +#define IPACK1_VENDOR_ID_UNREGISTRED04 0x04 +#define IPACK1_VENDOR_ID_UNREGISTRED05 0x05 +#define IPACK1_VENDOR_ID_UNREGISTRED06 0x06 +#define IPACK1_VENDOR_ID_UNREGISTRED07 0x07 +#define IPACK1_VENDOR_ID_UNREGISTRED08 0x08 +#define IPACK1_VENDOR_ID_UNREGISTRED09 0x09 +#define IPACK1_VENDOR_ID_UNREGISTRED10 0x0A +#define IPACK1_VENDOR_ID_UNREGISTRED11 0x0B +#define IPACK1_VENDOR_ID_UNREGISTRED12 0x0C +#define IPACK1_VENDOR_ID_UNREGISTRED13 0x0D +#define IPACK1_VENDOR_ID_UNREGISTRED14 0x0E +#define IPACK1_VENDOR_ID_UNREGISTRED15 0x0F + +#define IPACK1_VENDOR_ID_SBS 0xF0 +#define IPACK1_DEVICE_ID_SBS_OCTAL_232 0x22 +#define IPACK1_DEVICE_ID_SBS_OCTAL_422 0x2A +#define IPACK1_DEVICE_ID_SBS_OCTAL_485 0x48 + +struct ipack_bus_ops; +struct ipack_driver; + +enum ipack_space { + IPACK_IO_SPACE = 0, + IPACK_ID_SPACE, + IPACK_INT_SPACE, + IPACK_MEM8_SPACE, + IPACK_MEM16_SPACE, + /* Dummy for counting the number of entries. Must remain the last + * entry */ + IPACK_SPACE_COUNT, +}; + +/** + */ +struct ipack_region { + phys_addr_t start; + size_t size; +}; + +/** + * struct ipack_device + * + * @slot: Slot where the device is plugged in the carrier board + * @bus: ipack_bus_device where the device is plugged to. + * @id_space: Virtual address to ID space. + * @io_space: Virtual address to IO space. + * @mem_space: Virtual address to MEM space. + * @dev: device in kernel representation. + * + * Warning: Direct access to mapped memory is possible but the endianness + * is not the same with PCI carrier or VME carrier. The endianness is managed + * by the carrier board throught bus->ops. + */ +struct ipack_device { + unsigned int slot; + struct ipack_bus_device *bus; + struct device dev; + void (*release) (struct ipack_device *dev); + struct ipack_region region[IPACK_SPACE_COUNT]; + u8 *id; + size_t id_avail; + u32 id_vendor; + u32 id_device; + u8 id_format; + unsigned int id_crc_correct:1; + unsigned int speed_8mhz:1; + unsigned int speed_32mhz:1; +}; + +/** + * struct ipack_driver_ops -- Callbacks to IPack device driver + * + * @probe: Probe function + * @remove: Prepare imminent removal of the device. Services provided by the + * device should be revoked. + */ + +struct ipack_driver_ops { + int (*probe) (struct ipack_device *dev); + void (*remove) (struct ipack_device *dev); +}; + +/** + * struct ipack_driver -- Specific data to each ipack device driver + * + * @driver: Device driver kernel representation + * @ops: Callbacks provided by the IPack device driver + */ +struct ipack_driver { + struct device_driver driver; + const struct ipack_device_id *id_table; + const struct ipack_driver_ops *ops; +}; + +/** + * struct ipack_bus_ops - available operations on a bridge module + * + * @map_space: map IP address space + * @unmap_space: unmap IP address space + * @request_irq: request IRQ + * @free_irq: free IRQ + * @get_clockrate: Returns the clockrate the carrier is currently + * communicating with the device at. + * @set_clockrate: Sets the clock-rate for carrier / module communication. + * Should return -EINVAL if the requested speed is not supported. + * @get_error: Returns the error state for the slot the device is attached + * to. + * @get_timeout: Returns 1 if the communication with the device has + * previously timed out. + * @reset_timeout: Resets the state returned by get_timeout. + */ +struct ipack_bus_ops { + int (*request_irq) (struct ipack_device *dev, + irqreturn_t (*handler)(void *), void *arg); + int (*free_irq) (struct ipack_device *dev); + int (*get_clockrate) (struct ipack_device *dev); + int (*set_clockrate) (struct ipack_device *dev, int mherz); + int (*get_error) (struct ipack_device *dev); + int (*get_timeout) (struct ipack_device *dev); + int (*reset_timeout) (struct ipack_device *dev); +}; + +/** + * struct ipack_bus_device + * + * @dev: pointer to carrier device + * @slots: number of slots available + * @bus_nr: ipack bus number + * @ops: bus operations for the mezzanine drivers + */ +struct ipack_bus_device { + struct device *parent; + int slots; + int bus_nr; + const struct ipack_bus_ops *ops; +}; + +/** + * ipack_bus_register -- register a new ipack bus + * + * @parent: pointer to the parent device, if any. + * @slots: number of slots available in the bus device. + * @ops: bus operations for the mezzanine drivers. + * + * The carrier board device should call this function to register itself as + * available bus device in ipack. + */ +struct ipack_bus_device *ipack_bus_register(struct device *parent, int slots, + const struct ipack_bus_ops *ops); + +/** + * ipack_bus_unregister -- unregister an ipack bus + */ +int ipack_bus_unregister(struct ipack_bus_device *bus); + +/** + * ipack_driver_register -- Register a new ipack device driver + * + * Called by a ipack driver to register itself as a driver + * that can manage ipack devices. + */ +int ipack_driver_register(struct ipack_driver *edrv, struct module *owner, + const char *name); +void ipack_driver_unregister(struct ipack_driver *edrv); + +/** + * ipack_device_register -- register an IPack device with the kernel + * @dev: the new device to register. + * + * Register a new IPack device ("module" in IndustryPack jargon). The call + * is done by the carrier driver. The carrier should populate the fields + * bus and slot as well as the region array of @dev prior to calling this + * function. The rest of the fields will be allocated and populated + * during registration. + * + * Return zero on success or error code on failure. + */ +int ipack_device_register(struct ipack_device *dev); +void ipack_device_unregister(struct ipack_device *dev); + +/** + * DEFINE_IPACK_DEVICE_TABLE - macro used to describe a IndustryPack table + * @_table: device table name + * + * This macro is used to create a struct ipack_device_id array (a device table) + * in a generic manner. + */ +#define DEFINE_IPACK_DEVICE_TABLE(_table) \ + const struct ipack_device_id _table[] +/** + * IPACK_DEVICE - macro used to describe a specific IndustryPack device + * @_format: the format version (currently either 1 or 2, 8 bit value) + * @vend: the 8 or 24 bit IndustryPack Vendor ID + * @dev: the 8 or 16 bit IndustryPack Device ID + * + * This macro is used to create a struct ipack_device_id that matches a specific + * device. + */ +#define IPACK_DEVICE(_format, vend, dev) \ + .format = (_format), \ + .vendor = (vend), \ + .device = (dev) diff --git a/include/linux/ipmi_smi.h b/include/linux/ipmi_smi.h index fcb5d44ea635..8ea3fe0b9759 100644 --- a/include/linux/ipmi_smi.h +++ b/include/linux/ipmi_smi.h @@ -216,7 +216,7 @@ int ipmi_unregister_smi(ipmi_smi_t intf); /* * The lower layer reports received messages through this interface. - * The data_size should be zero if this is an asyncronous message. If + * The data_size should be zero if this is an asynchronous message. If * the lower layer gets an error sending a message, it should format * an error response in the message response. */ diff --git a/include/linux/ipv6.h b/include/linux/ipv6.h index bcba48a97868..faed1e357dd6 100644 --- a/include/linux/ipv6.h +++ b/include/linux/ipv6.h @@ -47,6 +47,7 @@ struct ipv6_devconf { __s32 disable_ipv6; __s32 accept_dad; __s32 force_tllao; + __s32 ndisc_notify; void *sysctl; }; @@ -66,6 +67,11 @@ static inline struct ipv6hdr *ipv6_hdr(const struct sk_buff *skb) return (struct ipv6hdr *)skb_network_header(skb); } +static inline struct ipv6hdr *inner_ipv6_hdr(const struct sk_buff *skb) +{ + return (struct ipv6hdr *)skb_inner_network_header(skb); +} + static inline struct ipv6hdr *ipipv6_hdr(const struct sk_buff *skb) { return (struct ipv6hdr *)skb_transport_header(skb); @@ -363,20 +369,22 @@ static inline struct raw6_sock *raw6_sk(const struct sock *sk) #define inet_v6_ipv6only(__sk) 0 #endif /* IS_ENABLED(CONFIG_IPV6) */ -#define INET6_MATCH(__sk, __net, __hash, __saddr, __daddr, __ports, __dif)\ - (((__sk)->sk_hash == (__hash)) && sock_net((__sk)) == (__net) && \ - ((*((__portpair *)&(inet_sk(__sk)->inet_dport))) == (__ports)) && \ - ((__sk)->sk_family == AF_INET6) && \ - ipv6_addr_equal(&inet6_sk(__sk)->daddr, (__saddr)) && \ - ipv6_addr_equal(&inet6_sk(__sk)->rcv_saddr, (__daddr)) && \ - (!((__sk)->sk_bound_dev_if) || ((__sk)->sk_bound_dev_if == (__dif)))) - -#define INET6_TW_MATCH(__sk, __net, __hash, __saddr, __daddr, __ports, __dif) \ - (((__sk)->sk_hash == (__hash)) && sock_net((__sk)) == (__net) && \ - (*((__portpair *)&(inet_twsk(__sk)->tw_dport)) == (__ports)) && \ - ((__sk)->sk_family == PF_INET6) && \ - (ipv6_addr_equal(&inet6_twsk(__sk)->tw_v6_daddr, (__saddr))) && \ - (ipv6_addr_equal(&inet6_twsk(__sk)->tw_v6_rcv_saddr, (__daddr))) && \ - (!((__sk)->sk_bound_dev_if) || ((__sk)->sk_bound_dev_if == (__dif)))) +#define INET6_MATCH(__sk, __net, __saddr, __daddr, __ports, __dif) \ + ((inet_sk(__sk)->inet_portpair == (__ports)) && \ + ((__sk)->sk_family == AF_INET6) && \ + ipv6_addr_equal(&inet6_sk(__sk)->daddr, (__saddr)) && \ + ipv6_addr_equal(&inet6_sk(__sk)->rcv_saddr, (__daddr)) && \ + (!(__sk)->sk_bound_dev_if || \ + ((__sk)->sk_bound_dev_if == (__dif))) && \ + net_eq(sock_net(__sk), (__net))) + +#define INET6_TW_MATCH(__sk, __net, __saddr, __daddr, __ports, __dif) \ + ((inet_twsk(__sk)->tw_portpair == (__ports)) && \ + ((__sk)->sk_family == AF_INET6) && \ + ipv6_addr_equal(&inet6_twsk(__sk)->tw_v6_daddr, (__saddr)) && \ + ipv6_addr_equal(&inet6_twsk(__sk)->tw_v6_rcv_saddr, (__daddr)) && \ + (!(__sk)->sk_bound_dev_if || \ + ((__sk)->sk_bound_dev_if == (__dif))) && \ + net_eq(sock_net(__sk), (__net))) #endif /* _IPV6_H */ diff --git a/include/linux/irq.h b/include/linux/irq.h index 216b0ba109d7..fdf2c4a238cc 100644 --- a/include/linux/irq.h +++ b/include/linux/irq.h @@ -10,9 +10,6 @@ */ #include <linux/smp.h> - -#ifndef CONFIG_S390 - #include <linux/linkage.h> #include <linux/cache.h> #include <linux/spinlock.h> @@ -392,6 +389,15 @@ static inline void irq_move_masked_irq(struct irq_data *data) { } extern int no_irq_affinity; +#ifdef CONFIG_HARDIRQS_SW_RESEND +int irq_set_parent(int irq, int parent_irq); +#else +static inline int irq_set_parent(int irq, int parent_irq) +{ + return 0; +} +#endif + /* * Built-in IRQ handlers for various IRQ types, * callable via desc->handle_irq() @@ -737,8 +743,11 @@ static inline void irq_gc_lock(struct irq_chip_generic *gc) { } static inline void irq_gc_unlock(struct irq_chip_generic *gc) { } #endif -#endif /* CONFIG_GENERIC_HARDIRQS */ +#else /* !CONFIG_GENERIC_HARDIRQS */ -#endif /* !CONFIG_S390 */ +extern struct msi_desc *irq_get_msi_desc(unsigned int irq); +extern int irq_set_msi_desc(unsigned int irq, struct msi_desc *entry); + +#endif /* CONFIG_GENERIC_HARDIRQS */ #endif /* _LINUX_IRQ_H */ diff --git a/include/linux/irqchip/spear-shirq.h b/include/linux/irqchip/spear-shirq.h new file mode 100644 index 000000000000..c8be16d213a3 --- /dev/null +++ b/include/linux/irqchip/spear-shirq.h @@ -0,0 +1,64 @@ +/* + * SPEAr platform shared irq layer header file + * + * Copyright (C) 2009-2012 ST Microelectronics + * Viresh Kumar <viresh.linux@gmail.com> + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +#ifndef __SPEAR_SHIRQ_H +#define __SPEAR_SHIRQ_H + +#include <linux/irq.h> +#include <linux/types.h> + +/* + * struct shirq_regs: shared irq register configuration + * + * enb_reg: enable register offset + * reset_to_enb: val 1 indicates, we need to clear bit for enabling interrupt + * status_reg: status register offset + * status_reg_mask: status register valid mask + * clear_reg: clear register offset + * reset_to_clear: val 1 indicates, we need to clear bit for clearing interrupt + */ +struct shirq_regs { + u32 enb_reg; + u32 reset_to_enb; + u32 status_reg; + u32 clear_reg; + u32 reset_to_clear; +}; + +/* + * struct spear_shirq: shared irq structure + * + * irq: hardware irq number + * irq_base: base irq in linux domain + * irq_nr: no. of shared interrupts in a particular block + * irq_bit_off: starting bit offset in the status register + * invalid_irq: irq group is currently disabled + * base: base address of shared irq register + * regs: register configuration for shared irq block + */ +struct spear_shirq { + u32 irq; + u32 irq_base; + u32 irq_nr; + u32 irq_bit_off; + int invalid_irq; + void __iomem *base; + struct shirq_regs regs; +}; + +int __init spear300_shirq_of_init(struct device_node *np, + struct device_node *parent); +int __init spear310_shirq_of_init(struct device_node *np, + struct device_node *parent); +int __init spear320_shirq_of_init(struct device_node *np, + struct device_node *parent); + +#endif /* __SPEAR_SHIRQ_H */ diff --git a/include/linux/irqchip/sunxi.h b/include/linux/irqchip/sunxi.h new file mode 100644 index 000000000000..1fe2c2260e2b --- /dev/null +++ b/include/linux/irqchip/sunxi.h @@ -0,0 +1,27 @@ +/* + * Copyright 2012 Maxime Ripard + * + * Maxime Ripard <maxime.ripard@free-electrons.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#ifndef __LINUX_IRQCHIP_SUNXI_H +#define __LINUX_IRQCHIP_SUNXI_H + +#include <asm/exception.h> + +extern void sunxi_init_irq(void); + +extern asmlinkage void __exception_irq_entry sunxi_handle_irq( + struct pt_regs *regs); + +#endif diff --git a/include/linux/irqchip/versatile-fpga.h b/include/linux/irqchip/versatile-fpga.h new file mode 100644 index 000000000000..1fac9651d3ca --- /dev/null +++ b/include/linux/irqchip/versatile-fpga.h @@ -0,0 +1,13 @@ +#ifndef PLAT_FPGA_IRQ_H +#define PLAT_FPGA_IRQ_H + +struct device_node; +struct pt_regs; + +void fpga_handle_irq(struct pt_regs *regs); +void fpga_irq_init(void __iomem *, const char *, int, int, u32, + struct device_node *node); +int fpga_irq_of_init(struct device_node *node, + struct device_node *parent); + +#endif diff --git a/include/linux/irqdesc.h b/include/linux/irqdesc.h index 0ba014c55056..623325e2ff97 100644 --- a/include/linux/irqdesc.h +++ b/include/linux/irqdesc.h @@ -11,6 +11,8 @@ struct irq_affinity_notify; struct proc_dir_entry; struct module; +struct irq_desc; + /** * struct irq_desc - interrupt descriptor * @irq_data: per irq and chip data passed down to chip functions @@ -65,6 +67,7 @@ struct irq_desc { #ifdef CONFIG_PROC_FS struct proc_dir_entry *dir; #endif + int parent_irq; struct module *owner; const char *name; } ____cacheline_internodealigned_in_smp; diff --git a/include/linux/jiffies.h b/include/linux/jiffies.h index 6b87413da9d6..82ed068b1ebe 100644 --- a/include/linux/jiffies.h +++ b/include/linux/jiffies.h @@ -70,11 +70,12 @@ extern int register_refined_jiffies(long clock_tick_rate); /* * The 64-bit value is not atomic - you MUST NOT read it - * without sampling the sequence number in xtime_lock. + * without sampling the sequence number in jiffies_lock. * get_jiffies_64() will do this for you as appropriate. */ extern u64 __jiffy_data jiffies_64; extern unsigned long volatile __jiffy_data jiffies; +extern seqlock_t jiffies_lock; #if (BITS_PER_LONG < 64) u64 get_jiffies_64(void); diff --git a/include/linux/kernel.h b/include/linux/kernel.h index a123b13b70fd..d97ed5897447 100644 --- a/include/linux/kernel.h +++ b/include/linux/kernel.h @@ -527,9 +527,6 @@ __ftrace_vprintk(unsigned long ip, const char *fmt, va_list ap); extern void ftrace_dump(enum ftrace_dump_mode oops_dump_mode); #else -static inline __printf(1, 2) -int trace_printk(const char *fmt, ...); - static inline void tracing_start(void) { } static inline void tracing_stop(void) { } static inline void ftrace_off_permanent(void) { } @@ -539,8 +536,8 @@ static inline void tracing_on(void) { } static inline void tracing_off(void) { } static inline int tracing_is_on(void) { return 0; } -static inline int -trace_printk(const char *fmt, ...) +static inline __printf(1, 2) +int trace_printk(const char *fmt, ...) { return 0; } @@ -687,18 +684,11 @@ static inline void ftrace_dump(enum ftrace_dump_mode oops_dump_mode) { } /* Trap pasters of __FUNCTION__ at compile-time */ #define __FUNCTION__ (__func__) -/* This helps us to avoid #ifdef CONFIG_NUMA */ -#ifdef CONFIG_NUMA -#define NUMA_BUILD 1 -#else -#define NUMA_BUILD 0 -#endif - -/* This helps us avoid #ifdef CONFIG_COMPACTION */ -#ifdef CONFIG_COMPACTION -#define COMPACTION_BUILD 1 +/* This helps us to avoid #ifdef CONFIG_SYMBOL_PREFIX */ +#ifdef CONFIG_SYMBOL_PREFIX +#define SYMBOL_PREFIX CONFIG_SYMBOL_PREFIX #else -#define COMPACTION_BUILD 0 +#define SYMBOL_PREFIX "" #endif /* Rebuild everything on CONFIG_FTRACE_MCOUNT_RECORD */ diff --git a/include/linux/kernel_stat.h b/include/linux/kernel_stat.h index 36d12f0884c3..66b70780e910 100644 --- a/include/linux/kernel_stat.h +++ b/include/linux/kernel_stat.h @@ -7,6 +7,7 @@ #include <linux/cpumask.h> #include <linux/interrupt.h> #include <linux/sched.h> +#include <linux/vtime.h> #include <asm/irq.h> #include <asm/cputime.h> @@ -126,16 +127,16 @@ extern void account_system_time(struct task_struct *, int, cputime_t, cputime_t) extern void account_steal_time(cputime_t); extern void account_idle_time(cputime_t); -extern void account_process_tick(struct task_struct *, int user); -extern void account_steal_ticks(unsigned long ticks); -extern void account_idle_ticks(unsigned long ticks); - #ifdef CONFIG_VIRT_CPU_ACCOUNTING -extern void vtime_task_switch(struct task_struct *prev); -extern void vtime_account_system(struct task_struct *tsk); -extern void vtime_account_idle(struct task_struct *tsk); +static inline void account_process_tick(struct task_struct *tsk, int user) +{ + vtime_account_user(tsk); +} #else -static inline void vtime_task_switch(struct task_struct *prev) { } +extern void account_process_tick(struct task_struct *, int user); #endif +extern void account_steal_ticks(unsigned long ticks); +extern void account_idle_ticks(unsigned long ticks); + #endif /* _LINUX_KERNEL_STAT_H */ diff --git a/include/linux/kobject.h b/include/linux/kobject.h index 1e57449395b1..939b11268c86 100644 --- a/include/linux/kobject.h +++ b/include/linux/kobject.h @@ -203,7 +203,6 @@ extern struct kobject *power_kobj; /* The global /sys/firmware/ kobject for people to chain off of */ extern struct kobject *firmware_kobj; -#if defined(CONFIG_HOTPLUG) int kobject_uevent(struct kobject *kobj, enum kobject_action action); int kobject_uevent_env(struct kobject *kobj, enum kobject_action action, char *envp[]); @@ -213,22 +212,5 @@ int add_uevent_var(struct kobj_uevent_env *env, const char *format, ...); int kobject_action_type(const char *buf, size_t count, enum kobject_action *type); -#else -static inline int kobject_uevent(struct kobject *kobj, - enum kobject_action action) -{ return 0; } -static inline int kobject_uevent_env(struct kobject *kobj, - enum kobject_action action, - char *envp[]) -{ return 0; } - -static inline __printf(2, 3) -int add_uevent_var(struct kobj_uevent_env *env, const char *format, ...) -{ return -ENOMEM; } - -static inline int kobject_action_type(const char *buf, size_t count, - enum kobject_action *type) -{ return -EINVAL; } -#endif #endif /* _KOBJECT_H_ */ diff --git a/include/linux/ktime.h b/include/linux/ktime.h index 06177ba10a16..e83512f63df5 100644 --- a/include/linux/ktime.h +++ b/include/linux/ktime.h @@ -282,6 +282,25 @@ static inline int ktime_equal(const ktime_t cmp1, const ktime_t cmp2) return cmp1.tv64 == cmp2.tv64; } +/** + * ktime_compare - Compares two ktime_t variables for less, greater or equal + * @cmp1: comparable1 + * @cmp2: comparable2 + * + * Returns ... + * cmp1 < cmp2: return <0 + * cmp1 == cmp2: return 0 + * cmp1 > cmp2: return >0 + */ +static inline int ktime_compare(const ktime_t cmp1, const ktime_t cmp2) +{ + if (cmp1.tv64 < cmp2.tv64) + return -1; + if (cmp1.tv64 > cmp2.tv64) + return 1; + return 0; +} + static inline s64 ktime_to_us(const ktime_t kt) { struct timeval tv = ktime_to_timeval(kt); diff --git a/include/linux/kvm_host.h b/include/linux/kvm_host.h index ecc554374e44..2c497ab0d03d 100644 --- a/include/linux/kvm_host.h +++ b/include/linux/kvm_host.h @@ -47,28 +47,40 @@ /* * For the normal pfn, the highest 12 bits should be zero, - * so we can mask these bits to indicate the error. + * so we can mask bit 62 ~ bit 52 to indicate the error pfn, + * mask bit 63 to indicate the noslot pfn. */ -#define KVM_PFN_ERR_MASK (0xfffULL << 52) +#define KVM_PFN_ERR_MASK (0x7ffULL << 52) +#define KVM_PFN_ERR_NOSLOT_MASK (0xfffULL << 52) +#define KVM_PFN_NOSLOT (0x1ULL << 63) #define KVM_PFN_ERR_FAULT (KVM_PFN_ERR_MASK) #define KVM_PFN_ERR_HWPOISON (KVM_PFN_ERR_MASK + 1) -#define KVM_PFN_ERR_BAD (KVM_PFN_ERR_MASK + 2) -#define KVM_PFN_ERR_RO_FAULT (KVM_PFN_ERR_MASK + 3) +#define KVM_PFN_ERR_RO_FAULT (KVM_PFN_ERR_MASK + 2) +/* + * error pfns indicate that the gfn is in slot but faild to + * translate it to pfn on host. + */ static inline bool is_error_pfn(pfn_t pfn) { return !!(pfn & KVM_PFN_ERR_MASK); } -static inline bool is_noslot_pfn(pfn_t pfn) +/* + * error_noslot pfns indicate that the gfn can not be + * translated to pfn - it is not in slot or failed to + * translate it to pfn. + */ +static inline bool is_error_noslot_pfn(pfn_t pfn) { - return pfn == KVM_PFN_ERR_BAD; + return !!(pfn & KVM_PFN_ERR_NOSLOT_MASK); } -static inline bool is_invalid_pfn(pfn_t pfn) +/* noslot pfn indicates that the gfn is not in slot. */ +static inline bool is_noslot_pfn(pfn_t pfn) { - return !is_noslot_pfn(pfn) && is_error_pfn(pfn); + return pfn == KVM_PFN_NOSLOT; } #define KVM_HVA_ERR_BAD (PAGE_OFFSET) @@ -107,6 +119,9 @@ static inline bool is_error_page(struct page *page) #define KVM_REQ_IMMEDIATE_EXIT 15 #define KVM_REQ_PMU 16 #define KVM_REQ_PMI 17 +#define KVM_REQ_WATCHDOG 18 +#define KVM_REQ_MASTERCLOCK_UPDATE 19 +#define KVM_REQ_MCLOCK_INPROGRESS 20 #define KVM_USERSPACE_IRQ_SOURCE_ID 0 #define KVM_IRQFD_RESAMPLE_IRQ_SOURCE_ID 1 @@ -516,6 +531,7 @@ void kvm_put_guest_fpu(struct kvm_vcpu *vcpu); void kvm_flush_remote_tlbs(struct kvm *kvm); void kvm_reload_remote_mmus(struct kvm *kvm); +void kvm_make_mclock_inprogress_request(struct kvm *kvm); long kvm_arch_dev_ioctl(struct file *filp, unsigned int ioctl, unsigned long arg); @@ -569,9 +585,9 @@ void kvm_arch_vcpu_load(struct kvm_vcpu *vcpu, int cpu); void kvm_arch_vcpu_put(struct kvm_vcpu *vcpu); struct kvm_vcpu *kvm_arch_vcpu_create(struct kvm *kvm, unsigned int id); int kvm_arch_vcpu_setup(struct kvm_vcpu *vcpu); +int kvm_arch_vcpu_postcreate(struct kvm_vcpu *vcpu); void kvm_arch_vcpu_destroy(struct kvm_vcpu *vcpu); -int kvm_arch_vcpu_reset(struct kvm_vcpu *vcpu); int kvm_arch_hardware_enable(void *garbage); void kvm_arch_hardware_disable(void *garbage); int kvm_arch_hardware_setup(void); @@ -666,6 +682,7 @@ void kvm_get_intr_delivery_bitmask(struct kvm_ioapic *ioapic, unsigned long *deliver_bitmask); #endif int kvm_set_irq(struct kvm *kvm, int irq_source_id, u32 irq, int level); +int kvm_set_irq_inatomic(struct kvm *kvm, int irq_source_id, u32 irq, int level); int kvm_set_msi(struct kvm_kernel_irq_routing_entry *irq_entry, struct kvm *kvm, int irq_source_id, int level); void kvm_notify_acked_irq(struct kvm *kvm, unsigned irqchip, unsigned pin); @@ -726,7 +743,11 @@ static inline int kvm_deassign_device(struct kvm *kvm, static inline void kvm_guest_enter(void) { BUG_ON(preemptible()); - vtime_account(current); + /* + * This is running in ioctl context so we can avoid + * the call to vtime_account() with its unnecessary idle check. + */ + vtime_account_system_irqsafe(current); current->flags |= PF_VCPU; /* KVM does not hold any references to rcu protected data when it * switches CPU into a guest mode. In fact switching to a guest mode @@ -740,7 +761,11 @@ static inline void kvm_guest_enter(void) static inline void kvm_guest_exit(void) { - vtime_account(current); + /* + * This is running in ioctl context so we can avoid + * the call to vtime_account() with its unnecessary idle check. + */ + vtime_account_system_irqsafe(current); current->flags &= ~PF_VCPU; } @@ -830,9 +855,9 @@ extern struct kvm_stats_debugfs_item debugfs_entries[]; extern struct dentry *kvm_debugfs_dir; #if defined(CONFIG_MMU_NOTIFIER) && defined(KVM_ARCH_WANT_MMU_NOTIFIER) -static inline int mmu_notifier_retry(struct kvm_vcpu *vcpu, unsigned long mmu_seq) +static inline int mmu_notifier_retry(struct kvm *kvm, unsigned long mmu_seq) { - if (unlikely(vcpu->kvm->mmu_notifier_count)) + if (unlikely(kvm->mmu_notifier_count)) return 1; /* * Ensure the read of mmu_notifier_count happens before the read @@ -845,7 +870,7 @@ static inline int mmu_notifier_retry(struct kvm_vcpu *vcpu, unsigned long mmu_se * can't rely on kvm->mmu_lock to keep things ordered. */ smp_rmb(); - if (vcpu->kvm->mmu_notifier_seq != mmu_seq) + if (kvm->mmu_notifier_seq != mmu_seq) return 1; return 0; } @@ -873,10 +898,20 @@ static inline void kvm_free_irq_routing(struct kvm *kvm) {} #ifdef CONFIG_HAVE_KVM_EVENTFD void kvm_eventfd_init(struct kvm *kvm); +int kvm_ioeventfd(struct kvm *kvm, struct kvm_ioeventfd *args); + +#ifdef CONFIG_HAVE_KVM_IRQCHIP int kvm_irqfd(struct kvm *kvm, struct kvm_irqfd *args); void kvm_irqfd_release(struct kvm *kvm); void kvm_irq_routing_update(struct kvm *, struct kvm_irq_routing_table *); -int kvm_ioeventfd(struct kvm *kvm, struct kvm_ioeventfd *args); +#else +static inline int kvm_irqfd(struct kvm *kvm, struct kvm_irqfd *args) +{ + return -EINVAL; +} + +static inline void kvm_irqfd_release(struct kvm *kvm) {} +#endif #else diff --git a/include/linux/leds.h b/include/linux/leds.h index 6e53bb31c220..0d9b5eed714e 100644 --- a/include/linux/leds.h +++ b/include/linux/leds.h @@ -179,6 +179,23 @@ extern void led_trigger_blink_oneshot(struct led_trigger *trigger, unsigned long *delay_on, unsigned long *delay_off, int invert); +/** + * led_trigger_rename_static - rename a trigger + * @name: the new trigger name + * @trig: the LED trigger to rename + * + * Change a LED trigger name by copying the string passed in + * name into current trigger name, which MUST be large + * enough for the new string. + * + * Note that name must NOT point to the same string used + * during LED registration, as that could lead to races. + * + * This is meant to be used on triggers with statically + * allocated name. + */ +extern void led_trigger_rename_static(const char *name, + struct led_trigger *trig); #else diff --git a/include/linux/libata.h b/include/linux/libata.h index 77eeeda2b6e2..83ba0ab2c915 100644 --- a/include/linux/libata.h +++ b/include/linux/libata.h @@ -163,6 +163,7 @@ enum { ATA_DFLAG_DA = (1 << 26), /* device supports Device Attention */ ATA_DFLAG_DEVSLP = (1 << 27), /* device supports Device Sleep */ + ATA_DFLAG_ACPI_DISABLED = (1 << 28), /* ACPI for the device is disabled */ ATA_DEV_UNKNOWN = 0, /* unknown device */ ATA_DEV_ATA = 1, /* ATA device */ @@ -1114,6 +1115,10 @@ extern int ata_pci_device_resume(struct pci_dev *pdev); #endif /* CONFIG_PM */ #endif /* CONFIG_PCI */ +struct platform_device; + +extern int ata_platform_remove_one(struct platform_device *pdev); + /* * ACPI - drivers/ata/libata-acpi.c */ diff --git a/include/linux/lru_cache.h b/include/linux/lru_cache.h index 7a71ffad037c..cafc7f99e124 100644 --- a/include/linux/lru_cache.h +++ b/include/linux/lru_cache.h @@ -52,8 +52,8 @@ We replicate IO (more or less synchronously) to local and remote disk. For crash recovery after replication node failure, we need to resync all regions that have been target of in-flight WRITE IO - (in use, or "hot", regions), as we don't know wether or not those WRITEs have - made it to stable storage. + (in use, or "hot", regions), as we don't know whether or not those WRITEs + have made it to stable storage. To avoid a "full resync", we need to persistently track these regions. diff --git a/include/linux/memcontrol.h b/include/linux/memcontrol.h index 11ddc7ffeba8..e98a74c0c9c0 100644 --- a/include/linux/memcontrol.h +++ b/include/linux/memcontrol.h @@ -181,7 +181,14 @@ unsigned long mem_cgroup_soft_limit_reclaim(struct zone *zone, int order, gfp_t gfp_mask, unsigned long *total_scanned); -void mem_cgroup_count_vm_event(struct mm_struct *mm, enum vm_event_item idx); +void __mem_cgroup_count_vm_event(struct mm_struct *mm, enum vm_event_item idx); +static inline void mem_cgroup_count_vm_event(struct mm_struct *mm, + enum vm_event_item idx) +{ + if (mem_cgroup_disabled()) + return; + __mem_cgroup_count_vm_event(mm, idx); +} #ifdef CONFIG_TRANSPARENT_HUGEPAGE void mem_cgroup_split_huge_fixup(struct page *head); #endif diff --git a/include/linux/memory.h b/include/linux/memory.h index ff9a9f8e0ed9..45e93b468878 100644 --- a/include/linux/memory.h +++ b/include/linux/memory.h @@ -53,6 +53,8 @@ int arch_get_memory_phys_device(unsigned long start_pfn); struct memory_notify { unsigned long start_pfn; unsigned long nr_pages; + int status_change_nid_normal; + int status_change_nid_high; int status_change_nid; }; diff --git a/include/linux/memory_hotplug.h b/include/linux/memory_hotplug.h index 95573ec4ee6c..4a45c4e50025 100644 --- a/include/linux/memory_hotplug.h +++ b/include/linux/memory_hotplug.h @@ -26,6 +26,13 @@ enum { MEMORY_HOTPLUG_MAX_BOOTMEM_TYPE = NODE_INFO, }; +/* Types for control the zone type of onlined memory */ +enum { + ONLINE_KEEP, + ONLINE_KERNEL, + ONLINE_MOVABLE, +}; + /* * pgdat resizing functions */ @@ -46,6 +53,10 @@ void pgdat_resize_init(struct pglist_data *pgdat) } /* * Zone resizing functions + * + * Note: any attempt to resize a zone should has pgdat_resize_lock() + * zone_span_writelock() both held. This ensure the size of a zone + * can't be changed while pgdat_resize_lock() held. */ static inline unsigned zone_span_seqbegin(struct zone *zone) { @@ -71,7 +82,7 @@ extern int zone_grow_free_lists(struct zone *zone, unsigned long new_nr_pages); extern int zone_grow_waitqueues(struct zone *zone, unsigned long nr_pages); extern int add_one_highpage(struct page *page, int pfn, int bad_ppro); /* VM interface that may be used by firmware interface */ -extern int online_pages(unsigned long, unsigned long); +extern int online_pages(unsigned long, unsigned long, int); extern void __offline_isolated_pages(unsigned long, unsigned long); typedef void (*online_page_callback_t)(struct page *page); diff --git a/include/linux/mempolicy.h b/include/linux/mempolicy.h index e5ccb9ddd90e..dbd212723b74 100644 --- a/include/linux/mempolicy.h +++ b/include/linux/mempolicy.h @@ -82,16 +82,6 @@ static inline void mpol_cond_put(struct mempolicy *pol) __mpol_put(pol); } -extern struct mempolicy *__mpol_cond_copy(struct mempolicy *tompol, - struct mempolicy *frompol); -static inline struct mempolicy *mpol_cond_copy(struct mempolicy *tompol, - struct mempolicy *frompol) -{ - if (!frompol) - return frompol; - return __mpol_cond_copy(tompol, frompol); -} - extern struct mempolicy *__mpol_dup(struct mempolicy *pol); static inline struct mempolicy *mpol_dup(struct mempolicy *pol) { @@ -215,12 +205,6 @@ static inline void mpol_cond_put(struct mempolicy *pol) { } -static inline struct mempolicy *mpol_cond_copy(struct mempolicy *to, - struct mempolicy *from) -{ - return from; -} - static inline void mpol_get(struct mempolicy *pol) { } diff --git a/include/linux/mfd/88pm80x.h b/include/linux/mfd/88pm80x.h index a0ca0dca1244..478672ed0c3d 100644 --- a/include/linux/mfd/88pm80x.h +++ b/include/linux/mfd/88pm80x.h @@ -364,6 +364,6 @@ static inline int pm80x_dev_resume(struct device *dev) #endif extern int pm80x_init(struct i2c_client *client, - const struct i2c_device_id *id) __devinit; + const struct i2c_device_id *id); extern int pm80x_deinit(struct i2c_client *client); #endif /* __LINUX_MFD_88PM80X_H */ diff --git a/include/linux/mfd/abx500.h b/include/linux/mfd/abx500.h index 5d5298d56026..2138bd33021a 100644 --- a/include/linux/mfd/abx500.h +++ b/include/linux/mfd/abx500.h @@ -267,39 +267,21 @@ struct abx500_bm_data { int gnd_lift_resistance; const struct abx500_maxim_parameters *maxi; const struct abx500_bm_capacity_levels *cap_levels; - const struct abx500_battery_type *bat_type; + struct abx500_battery_type *bat_type; const struct abx500_bm_charger_parameters *chg_params; const struct abx500_fg_parameters *fg_params; }; -struct abx500_chargalg_platform_data { - char **supplied_to; - size_t num_supplicants; -}; - -struct abx500_charger_platform_data { - char **supplied_to; - size_t num_supplicants; - bool autopower_cfg; -}; +extern struct abx500_bm_data ab8500_bm_data; -struct abx500_btemp_platform_data { - char **supplied_to; - size_t num_supplicants; +enum { + NTC_EXTERNAL = 0, + NTC_INTERNAL, }; -struct abx500_fg_platform_data { - char **supplied_to; - size_t num_supplicants; -}; - -struct abx500_bm_plat_data { - struct abx500_bm_data *battery; - struct abx500_charger_platform_data *charger; - struct abx500_btemp_platform_data *btemp; - struct abx500_fg_platform_data *fg; - struct abx500_chargalg_platform_data *chargalg; -}; +int bmdevs_of_probe(struct device *dev, + struct device_node *np, + struct abx500_bm_data **battery); int abx500_set_register_interruptible(struct device *dev, u8 bank, u8 reg, u8 value); diff --git a/include/linux/mfd/abx500/ab8500.h b/include/linux/mfd/abx500/ab8500.h index 1491044efa10..1cb5698b4d76 100644 --- a/include/linux/mfd/abx500/ab8500.h +++ b/include/linux/mfd/abx500/ab8500.h @@ -291,9 +291,9 @@ struct ab8500_platform_data { struct ab8500_codec_platform_data *codec; }; -extern int __devinit ab8500_init(struct ab8500 *ab8500, +extern int ab8500_init(struct ab8500 *ab8500, enum ab8500_version version); -extern int __devexit ab8500_exit(struct ab8500 *ab8500); +extern int ab8500_exit(struct ab8500 *ab8500); extern int ab8500_suspend(struct ab8500 *ab8500); diff --git a/include/linux/mfd/arizona/core.h b/include/linux/mfd/arizona/core.h index dd231ac0bb1f..a580363a7d29 100644 --- a/include/linux/mfd/arizona/core.h +++ b/include/linux/mfd/arizona/core.h @@ -78,6 +78,8 @@ enum arizona_type { #define ARIZONA_NUM_IRQ 50 +struct snd_soc_dapm_context; + struct arizona { struct regmap *regmap; struct device *dev; @@ -98,6 +100,8 @@ struct arizona { struct mutex clk_lock; int clk32k_ref; + + struct snd_soc_dapm_context *dapm; }; int arizona_clk32k_enable(struct arizona *arizona); diff --git a/include/linux/mfd/arizona/pdata.h b/include/linux/mfd/arizona/pdata.h index 7ab442905a57..8b1d1daaae16 100644 --- a/include/linux/mfd/arizona/pdata.h +++ b/include/linux/mfd/arizona/pdata.h @@ -62,6 +62,9 @@ #define ARIZONA_MAX_OUTPUT 6 +#define ARIZONA_HAP_ACT_ERM 0 +#define ARIZONA_HAP_ACT_LRA 2 + #define ARIZONA_MAX_PDM_SPK 2 struct regulator_init_data; @@ -114,6 +117,9 @@ struct arizona_pdata { /** PDM speaker format */ unsigned int spk_fmt[ARIZONA_MAX_PDM_SPK]; + + /** Haptic actuator type */ + unsigned int hap_act; }; #endif diff --git a/include/linux/mfd/arizona/registers.h b/include/linux/mfd/arizona/registers.h index 7671a287dfee..ba26e99c388d 100644 --- a/include/linux/mfd/arizona/registers.h +++ b/include/linux/mfd/arizona/registers.h @@ -76,6 +76,7 @@ #define ARIZONA_RATE_ESTIMATOR_3 0x154 #define ARIZONA_RATE_ESTIMATOR_4 0x155 #define ARIZONA_RATE_ESTIMATOR_5 0x156 +#define ARIZONA_DYNAMIC_FREQUENCY_SCALING_1 0x161 #define ARIZONA_FLL1_CONTROL_1 0x171 #define ARIZONA_FLL1_CONTROL_2 0x172 #define ARIZONA_FLL1_CONTROL_3 0x173 @@ -110,6 +111,7 @@ #define ARIZONA_FLL2_GPIO_CLOCK 0x1AA #define ARIZONA_MIC_CHARGE_PUMP_1 0x200 #define ARIZONA_LDO1_CONTROL_1 0x210 +#define ARIZONA_LDO1_CONTROL_2 0x212 #define ARIZONA_LDO2_CONTROL_1 0x213 #define ARIZONA_MIC_BIAS_CTRL_1 0x218 #define ARIZONA_MIC_BIAS_CTRL_2 0x219 @@ -1574,6 +1576,13 @@ #define ARIZONA_SAMPLE_RATE_DETECT_D_WIDTH 5 /* SAMPLE_RATE_DETECT_D - [4:0] */ /* + * R353 (0x161) - Dynamic Frequency Scaling 1 + */ +#define ARIZONA_SUBSYS_MAX_FREQ 0x0001 /* SUBSYS_MAX_FREQ */ +#define ARIZONA_SUBSYS_MAX_FREQ_SHIFT 0 /* SUBSYS_MAX_FREQ */ +#define ARIZONA_SUBSYS_MAX_FREQ_WIDTH 1 /* SUBSYS_MAX_FREQ */ + +/* * R369 (0x171) - FLL1 Control 1 */ #define ARIZONA_FLL1_FREERUN 0x0002 /* FLL1_FREERUN */ @@ -1889,6 +1898,13 @@ #define ARIZONA_LDO1_ENA_WIDTH 1 /* LDO1_ENA */ /* + * R530 (0x212) - LDO1 Control 2 + */ +#define ARIZONA_LDO1_HI_PWR 0x0001 /* LDO1_HI_PWR */ +#define ARIZONA_LDO1_HI_PWR_SHIFT 0 /* LDO1_HI_PWR */ +#define ARIZONA_LDO1_HI_PWR_WIDTH 1 /* LDO1_HI_PWR */ + +/* * R531 (0x213) - LDO2 Control 1 */ #define ARIZONA_LDO2_VSEL_MASK 0x07E0 /* LDO2_VSEL - [10:5] */ diff --git a/include/linux/mfd/da9055/pdata.h b/include/linux/mfd/da9055/pdata.h index 147293b4471d..f87a6c172a91 100644 --- a/include/linux/mfd/da9055/pdata.h +++ b/include/linux/mfd/da9055/pdata.h @@ -25,8 +25,29 @@ struct da9055_pdata { int gpio_base; struct regulator_init_data *regulators[DA9055_MAX_REGULATORS]; - bool reset_enable; /* Enable RTC in RESET Mode */ - enum gpio_select *gpio_rsel; /* Select regulator set thru GPIO 1/2 */ - enum gpio_select *gpio_ren; /* Enable regulator thru GPIO 1/2 */ + /* Enable RTC in RESET Mode */ + bool reset_enable; + /* + * GPI muxed pin to control + * regulator state A/B, 0 if not available. + */ + int *gpio_ren; + /* + * GPI muxed pin to control + * regulator set, 0 if not available. + */ + int *gpio_rsel; + /* + * Regulator mode control bits value (GPI offset) that + * that controls the regulator state, 0 if not available. + */ + enum gpio_select *reg_ren; + /* + * Regulator mode control bits value (GPI offset) that + * controls the regulator set A/B, 0 if not available. + */ + enum gpio_select *reg_rsel; + /* GPIOs to enable regulator, 0 if not available */ + int *ena_gpio; }; #endif /* __DA9055_PDATA_H */ diff --git a/include/linux/mfd/db8500-prcmu.h b/include/linux/mfd/db8500-prcmu.h index b82f6ee66a0b..6ee4247df11e 100644 --- a/include/linux/mfd/db8500-prcmu.h +++ b/include/linux/mfd/db8500-prcmu.h @@ -515,7 +515,6 @@ enum romcode_read prcmu_get_rc_p2a(void); enum ap_pwrst prcmu_get_xp70_current_state(void); bool prcmu_has_arm_maxopp(void); struct prcmu_fw_version *prcmu_get_fw_version(void); -int prcmu_request_ape_opp_100_voltage(bool enable); int prcmu_release_usb_wakeup_state(void); void prcmu_configure_auto_pm(struct prcmu_auto_pm_config *sleep, struct prcmu_auto_pm_config *idle); @@ -564,6 +563,7 @@ int db8500_prcmu_set_arm_opp(u8 opp); int db8500_prcmu_get_arm_opp(void); int db8500_prcmu_set_ape_opp(u8 opp); int db8500_prcmu_get_ape_opp(void); +int db8500_prcmu_request_ape_opp_100_voltage(bool enable); int db8500_prcmu_set_ddr_opp(u8 opp); int db8500_prcmu_get_ddr_opp(void); @@ -610,7 +610,7 @@ static inline int db8500_prcmu_get_ape_opp(void) return APE_100_OPP; } -static inline int prcmu_request_ape_opp_100_voltage(bool enable) +static inline int db8500_prcmu_request_ape_opp_100_voltage(bool enable) { return 0; } diff --git a/include/linux/mfd/dbx500-prcmu.h b/include/linux/mfd/dbx500-prcmu.h index c410d99bd667..c202d6c4d879 100644 --- a/include/linux/mfd/dbx500-prcmu.h +++ b/include/linux/mfd/dbx500-prcmu.h @@ -336,6 +336,11 @@ static inline int prcmu_get_ape_opp(void) return db8500_prcmu_get_ape_opp(); } +static inline int prcmu_request_ape_opp_100_voltage(bool enable) +{ + return db8500_prcmu_request_ape_opp_100_voltage(enable); +} + static inline void prcmu_system_reset(u16 reset_code) { return db8500_prcmu_system_reset(reset_code); @@ -507,6 +512,11 @@ static inline int prcmu_get_ape_opp(void) return APE_100_OPP; } +static inline int prcmu_request_ape_opp_100_voltage(bool enable) +{ + return 0; +} + static inline int prcmu_set_arm_opp(u8 opp) { return 0; diff --git a/include/linux/mfd/lp8788.h b/include/linux/mfd/lp8788.h index cec364bdccfa..2a32b16f79cb 100644 --- a/include/linux/mfd/lp8788.h +++ b/include/linux/mfd/lp8788.h @@ -211,16 +211,16 @@ struct lp8788_chg_param { /* * struct lp8788_charger_platform_data - * @vbatt_adc : adc selection id for battery voltage - * @batt_temp_adc : adc selection id for battery temperature + * @adc_vbatt : adc channel name for battery voltage + * @adc_batt_temp : adc channel name for battery temperature * @max_vbatt_mv : used for calculating battery capacity * @chg_params : initial charging parameters * @num_chg_params : numbers of charging parameters * @charger_event : the charger event can be reported to the platform side */ struct lp8788_charger_platform_data { - enum lp8788_adc_id vbatt_adc; - enum lp8788_adc_id batt_temp_adc; + const char *adc_vbatt; + const char *adc_batt_temp; unsigned int max_vbatt_mv; struct lp8788_chg_param *chg_params; int num_chg_params; diff --git a/include/linux/mfd/max8997-private.h b/include/linux/mfd/max8997-private.h index 830152cfae33..6ae21bf47d64 100644 --- a/include/linux/mfd/max8997-private.h +++ b/include/linux/mfd/max8997-private.h @@ -316,6 +316,7 @@ enum max8997_irq { #define MAX8997_NUM_GPIO 12 struct max8997_dev { struct device *dev; + struct max8997_platform_data *pdata; struct i2c_client *i2c; /* 0xcc / PMIC, Battery Control, and FLASH */ struct i2c_client *rtc; /* slave addr 0x0c */ struct i2c_client *haptic; /* slave addr 0x90 */ diff --git a/include/linux/mfd/max8997.h b/include/linux/mfd/max8997.h index 328d8e24b533..1d4a4fe6ac33 100644 --- a/include/linux/mfd/max8997.h +++ b/include/linux/mfd/max8997.h @@ -75,6 +75,7 @@ enum max8998_regulators { struct max8997_regulator_data { int id; struct regulator_init_data *initdata; + struct device_node *reg_node; }; enum max8997_muic_usb_type { diff --git a/include/linux/mfd/menelaus.h b/include/linux/mfd/menelaus.h new file mode 100644 index 000000000000..f097e89134cb --- /dev/null +++ b/include/linux/mfd/menelaus.h @@ -0,0 +1,47 @@ +/* + * Functions to access Menelaus power management chip + */ + +#ifndef __ASM_ARCH_MENELAUS_H +#define __ASM_ARCH_MENELAUS_H + +struct device; + +struct menelaus_platform_data { + int (* late_init)(struct device *dev); +}; + +extern int menelaus_register_mmc_callback(void (*callback)(void *data, u8 card_mask), + void *data); +extern void menelaus_unregister_mmc_callback(void); +extern int menelaus_set_mmc_opendrain(int slot, int enable); +extern int menelaus_set_mmc_slot(int slot, int enable, int power, int cd_on); + +extern int menelaus_set_vmem(unsigned int mV); +extern int menelaus_set_vio(unsigned int mV); +extern int menelaus_set_vmmc(unsigned int mV); +extern int menelaus_set_vaux(unsigned int mV); +extern int menelaus_set_vdcdc(int dcdc, unsigned int mV); +extern int menelaus_set_slot_sel(int enable); +extern int menelaus_get_slot_pin_states(void); +extern int menelaus_set_vcore_sw(unsigned int mV); +extern int menelaus_set_vcore_hw(unsigned int roof_mV, unsigned int floor_mV); + +#define EN_VPLL_SLEEP (1 << 7) +#define EN_VMMC_SLEEP (1 << 6) +#define EN_VAUX_SLEEP (1 << 5) +#define EN_VIO_SLEEP (1 << 4) +#define EN_VMEM_SLEEP (1 << 3) +#define EN_DC3_SLEEP (1 << 2) +#define EN_DC2_SLEEP (1 << 1) +#define EN_VC_SLEEP (1 << 0) + +extern int menelaus_set_regulator_sleep(int enable, u32 val); + +#if defined(CONFIG_ARCH_OMAP2) && defined(CONFIG_MENELAUS) +#define omap_has_menelaus() 1 +#else +#define omap_has_menelaus() 0 +#endif + +#endif diff --git a/include/linux/mfd/pm8xxx/irq.h b/include/linux/mfd/pm8xxx/irq.h index 4b21769f4483..f83d6b43ecbb 100644 --- a/include/linux/mfd/pm8xxx/irq.h +++ b/include/linux/mfd/pm8xxx/irq.h @@ -37,21 +37,21 @@ struct pm_irq_chip; #ifdef CONFIG_MFD_PM8XXX_IRQ int pm8xxx_get_irq_stat(struct pm_irq_chip *chip, int irq); -struct pm_irq_chip * __devinit pm8xxx_irq_init(struct device *dev, +struct pm_irq_chip *pm8xxx_irq_init(struct device *dev, const struct pm8xxx_irq_platform_data *pdata); -int __devexit pm8xxx_irq_exit(struct pm_irq_chip *chip); +int pm8xxx_irq_exit(struct pm_irq_chip *chip); #else static inline int pm8xxx_get_irq_stat(struct pm_irq_chip *chip, int irq) { return -ENXIO; } -static inline struct pm_irq_chip * __devinit pm8xxx_irq_init( +static inline struct pm_irq_chip *pm8xxx_irq_init( const struct device *dev, const struct pm8xxx_irq_platform_data *pdata) { return ERR_PTR(-ENXIO); } -static inline int __devexit pm8xxx_irq_exit(struct pm_irq_chip *chip) +static inline int pm8xxx_irq_exit(struct pm_irq_chip *chip) { return -ENXIO; } diff --git a/include/linux/mfd/rtsx_common.h b/include/linux/mfd/rtsx_common.h new file mode 100644 index 000000000000..a8d393e3066b --- /dev/null +++ b/include/linux/mfd/rtsx_common.h @@ -0,0 +1,48 @@ +/* Driver for Realtek driver-based card reader + * + * Copyright(c) 2009 Realtek Semiconductor Corp. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2, or (at your option) any + * later version. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, see <http://www.gnu.org/licenses/>. + * + * Author: + * Wei WANG <wei_wang@realsil.com.cn> + * No. 450, Shenhu Road, Suzhou Industry Park, Suzhou, China + */ + +#ifndef __RTSX_COMMON_H +#define __RTSX_COMMON_H + +#define DRV_NAME_RTSX_PCI "rtsx_pci" +#define DRV_NAME_RTSX_PCI_SDMMC "rtsx_pci_sdmmc" +#define DRV_NAME_RTSX_PCI_MS "rtsx_pci_ms" + +#define RTSX_REG_PAIR(addr, val) (((u32)(addr) << 16) | (u8)(val)) + +#define RTSX_SSC_DEPTH_4M 0x01 +#define RTSX_SSC_DEPTH_2M 0x02 +#define RTSX_SSC_DEPTH_1M 0x03 +#define RTSX_SSC_DEPTH_500K 0x04 +#define RTSX_SSC_DEPTH_250K 0x05 + +#define RTSX_SD_CARD 0 +#define RTSX_MS_CARD 1 + +struct platform_device; + +struct rtsx_slot { + struct platform_device *p_dev; + void (*card_event)(struct platform_device *p_dev); +}; + +#endif diff --git a/include/linux/mfd/rtsx_pci.h b/include/linux/mfd/rtsx_pci.h new file mode 100644 index 000000000000..060b721fcbfb --- /dev/null +++ b/include/linux/mfd/rtsx_pci.h @@ -0,0 +1,794 @@ +/* Driver for Realtek PCI-Express card reader + * + * Copyright(c) 2009 Realtek Semiconductor Corp. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2, or (at your option) any + * later version. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, see <http://www.gnu.org/licenses/>. + * + * Author: + * Wei WANG <wei_wang@realsil.com.cn> + * No. 450, Shenhu Road, Suzhou Industry Park, Suzhou, China + */ + +#ifndef __RTSX_PCI_H +#define __RTSX_PCI_H + +#include <linux/sched.h> +#include <linux/pci.h> + +#include "rtsx_common.h" + +#define MAX_RW_REG_CNT 1024 + +/* PCI Operation Register Address */ +#define RTSX_HCBAR 0x00 +#define RTSX_HCBCTLR 0x04 +#define RTSX_HDBAR 0x08 +#define RTSX_HDBCTLR 0x0C +#define RTSX_HAIMR 0x10 +#define RTSX_BIPR 0x14 +#define RTSX_BIER 0x18 + +/* Host command buffer control register */ +#define STOP_CMD (0x01 << 28) + +/* Host data buffer control register */ +#define SDMA_MODE 0x00 +#define ADMA_MODE (0x02 << 26) +#define STOP_DMA (0x01 << 28) +#define TRIG_DMA (0x01 << 31) + +/* Host access internal memory register */ +#define HAIMR_TRANS_START (0x01 << 31) +#define HAIMR_READ 0x00 +#define HAIMR_WRITE (0x01 << 30) +#define HAIMR_READ_START (HAIMR_TRANS_START | HAIMR_READ) +#define HAIMR_WRITE_START (HAIMR_TRANS_START | HAIMR_WRITE) +#define HAIMR_TRANS_END (HAIMR_TRANS_START) + +/* Bus interrupt pending register */ +#define CMD_DONE_INT (1 << 31) +#define DATA_DONE_INT (1 << 30) +#define TRANS_OK_INT (1 << 29) +#define TRANS_FAIL_INT (1 << 28) +#define XD_INT (1 << 27) +#define MS_INT (1 << 26) +#define SD_INT (1 << 25) +#define GPIO0_INT (1 << 24) +#define OC_INT (1 << 23) +#define SD_WRITE_PROTECT (1 << 19) +#define XD_EXIST (1 << 18) +#define MS_EXIST (1 << 17) +#define SD_EXIST (1 << 16) +#define DELINK_INT GPIO0_INT +#define MS_OC_INT (1 << 23) +#define SD_OC_INT (1 << 22) + +#define CARD_INT (XD_INT | MS_INT | SD_INT) +#define NEED_COMPLETE_INT (DATA_DONE_INT | TRANS_OK_INT | TRANS_FAIL_INT) +#define RTSX_INT (CMD_DONE_INT | NEED_COMPLETE_INT | \ + CARD_INT | GPIO0_INT | OC_INT) + +#define CARD_EXIST (XD_EXIST | MS_EXIST | SD_EXIST) + +/* Bus interrupt enable register */ +#define CMD_DONE_INT_EN (1 << 31) +#define DATA_DONE_INT_EN (1 << 30) +#define TRANS_OK_INT_EN (1 << 29) +#define TRANS_FAIL_INT_EN (1 << 28) +#define XD_INT_EN (1 << 27) +#define MS_INT_EN (1 << 26) +#define SD_INT_EN (1 << 25) +#define GPIO0_INT_EN (1 << 24) +#define OC_INT_EN (1 << 23) +#define DELINK_INT_EN GPIO0_INT_EN +#define MS_OC_INT_EN (1 << 23) +#define SD_OC_INT_EN (1 << 22) + +#define READ_REG_CMD 0 +#define WRITE_REG_CMD 1 +#define CHECK_REG_CMD 2 + +/* + * macros for easy use + */ +#define rtsx_pci_writel(pcr, reg, value) \ + iowrite32(value, (pcr)->remap_addr + reg) +#define rtsx_pci_readl(pcr, reg) \ + ioread32((pcr)->remap_addr + reg) +#define rtsx_pci_writew(pcr, reg, value) \ + iowrite16(value, (pcr)->remap_addr + reg) +#define rtsx_pci_readw(pcr, reg) \ + ioread16((pcr)->remap_addr + reg) +#define rtsx_pci_writeb(pcr, reg, value) \ + iowrite8(value, (pcr)->remap_addr + reg) +#define rtsx_pci_readb(pcr, reg) \ + ioread8((pcr)->remap_addr + reg) + +#define rtsx_pci_read_config_byte(pcr, where, val) \ + pci_read_config_byte((pcr)->pci, where, val) + +#define rtsx_pci_write_config_byte(pcr, where, val) \ + pci_write_config_byte((pcr)->pci, where, val) + +#define rtsx_pci_read_config_dword(pcr, where, val) \ + pci_read_config_dword((pcr)->pci, where, val) + +#define rtsx_pci_write_config_dword(pcr, where, val) \ + pci_write_config_dword((pcr)->pci, where, val) + +#define STATE_TRANS_NONE 0 +#define STATE_TRANS_CMD 1 +#define STATE_TRANS_BUF 2 +#define STATE_TRANS_SG 3 + +#define TRANS_NOT_READY 0 +#define TRANS_RESULT_OK 1 +#define TRANS_RESULT_FAIL 2 +#define TRANS_NO_DEVICE 3 + +#define RTSX_RESV_BUF_LEN 4096 +#define HOST_CMDS_BUF_LEN 1024 +#define HOST_SG_TBL_BUF_LEN (RTSX_RESV_BUF_LEN - HOST_CMDS_BUF_LEN) +#define HOST_SG_TBL_ITEMS (HOST_SG_TBL_BUF_LEN / 8) +#define MAX_SG_ITEM_LEN 0x80000 + +#define HOST_TO_DEVICE 0 +#define DEVICE_TO_HOST 1 + +#define MAX_PHASE 31 +#define RX_TUNING_CNT 3 + +/* SG descriptor */ +#define SG_INT 0x04 +#define SG_END 0x02 +#define SG_VALID 0x01 + +#define SG_NO_OP 0x00 +#define SG_TRANS_DATA (0x02 << 4) +#define SG_LINK_DESC (0x03 << 4) + +/* SD bank voltage */ +#define SD_IO_3V3 0 +#define SD_IO_1V8 1 + + +/* Card Clock Enable Register */ +#define SD_CLK_EN 0x04 +#define MS_CLK_EN 0x08 + +/* Card Select Register */ +#define SD_MOD_SEL 2 +#define MS_MOD_SEL 3 + +/* Card Output Enable Register */ +#define SD_OUTPUT_EN 0x04 +#define MS_OUTPUT_EN 0x08 + +/* CARD_SHARE_MODE */ +#define CARD_SHARE_MASK 0x0F +#define CARD_SHARE_MULTI_LUN 0x00 +#define CARD_SHARE_NORMAL 0x00 +#define CARD_SHARE_48_SD 0x04 +#define CARD_SHARE_48_MS 0x08 +/* CARD_SHARE_MODE for barossa */ +#define CARD_SHARE_BAROSSA_SD 0x01 +#define CARD_SHARE_BAROSSA_MS 0x02 + +/* SD30_DRIVE_SEL */ +#define DRIVER_TYPE_A 0x05 +#define DRIVER_TYPE_B 0x03 +#define DRIVER_TYPE_C 0x02 +#define DRIVER_TYPE_D 0x01 + +/* FPDCTL */ +#define SSC_POWER_DOWN 0x01 +#define SD_OC_POWER_DOWN 0x02 +#define ALL_POWER_DOWN 0x07 +#define OC_POWER_DOWN 0x06 + +/* CLK_CTL */ +#define CHANGE_CLK 0x01 + +/* LDO_CTL */ +#define BPP_LDO_POWB 0x03 +#define BPP_LDO_ON 0x00 +#define BPP_LDO_SUSPEND 0x02 +#define BPP_LDO_OFF 0x03 + +/* CD_PAD_CTL */ +#define CD_DISABLE_MASK 0x07 +#define MS_CD_DISABLE 0x04 +#define SD_CD_DISABLE 0x02 +#define XD_CD_DISABLE 0x01 +#define CD_DISABLE 0x07 +#define CD_ENABLE 0x00 +#define MS_CD_EN_ONLY 0x03 +#define SD_CD_EN_ONLY 0x05 +#define XD_CD_EN_ONLY 0x06 +#define FORCE_CD_LOW_MASK 0x38 +#define FORCE_CD_XD_LOW 0x08 +#define FORCE_CD_SD_LOW 0x10 +#define FORCE_CD_MS_LOW 0x20 +#define CD_AUTO_DISABLE 0x40 + +/* SD_STAT1 */ +#define SD_CRC7_ERR 0x80 +#define SD_CRC16_ERR 0x40 +#define SD_CRC_WRITE_ERR 0x20 +#define SD_CRC_WRITE_ERR_MASK 0x1C +#define GET_CRC_TIME_OUT 0x02 +#define SD_TUNING_COMPARE_ERR 0x01 + +/* SD_STAT2 */ +#define SD_RSP_80CLK_TIMEOUT 0x01 + +/* SD_BUS_STAT */ +#define SD_CLK_TOGGLE_EN 0x80 +#define SD_CLK_FORCE_STOP 0x40 +#define SD_DAT3_STATUS 0x10 +#define SD_DAT2_STATUS 0x08 +#define SD_DAT1_STATUS 0x04 +#define SD_DAT0_STATUS 0x02 +#define SD_CMD_STATUS 0x01 + +/* SD_PAD_CTL */ +#define SD_IO_USING_1V8 0x80 +#define SD_IO_USING_3V3 0x7F +#define TYPE_A_DRIVING 0x00 +#define TYPE_B_DRIVING 0x01 +#define TYPE_C_DRIVING 0x02 +#define TYPE_D_DRIVING 0x03 + +/* SD_SAMPLE_POINT_CTL */ +#define DDR_FIX_RX_DAT 0x00 +#define DDR_VAR_RX_DAT 0x80 +#define DDR_FIX_RX_DAT_EDGE 0x00 +#define DDR_FIX_RX_DAT_14_DELAY 0x40 +#define DDR_FIX_RX_CMD 0x00 +#define DDR_VAR_RX_CMD 0x20 +#define DDR_FIX_RX_CMD_POS_EDGE 0x00 +#define DDR_FIX_RX_CMD_14_DELAY 0x10 +#define SD20_RX_POS_EDGE 0x00 +#define SD20_RX_14_DELAY 0x08 +#define SD20_RX_SEL_MASK 0x08 + +/* SD_PUSH_POINT_CTL */ +#define DDR_FIX_TX_CMD_DAT 0x00 +#define DDR_VAR_TX_CMD_DAT 0x80 +#define DDR_FIX_TX_DAT_14_TSU 0x00 +#define DDR_FIX_TX_DAT_12_TSU 0x40 +#define DDR_FIX_TX_CMD_NEG_EDGE 0x00 +#define DDR_FIX_TX_CMD_14_AHEAD 0x20 +#define SD20_TX_NEG_EDGE 0x00 +#define SD20_TX_14_AHEAD 0x10 +#define SD20_TX_SEL_MASK 0x10 +#define DDR_VAR_SDCLK_POL_SWAP 0x01 + +/* SD_TRANSFER */ +#define SD_TRANSFER_START 0x80 +#define SD_TRANSFER_END 0x40 +#define SD_STAT_IDLE 0x20 +#define SD_TRANSFER_ERR 0x10 +/* SD Transfer Mode definition */ +#define SD_TM_NORMAL_WRITE 0x00 +#define SD_TM_AUTO_WRITE_3 0x01 +#define SD_TM_AUTO_WRITE_4 0x02 +#define SD_TM_AUTO_READ_3 0x05 +#define SD_TM_AUTO_READ_4 0x06 +#define SD_TM_CMD_RSP 0x08 +#define SD_TM_AUTO_WRITE_1 0x09 +#define SD_TM_AUTO_WRITE_2 0x0A +#define SD_TM_NORMAL_READ 0x0C +#define SD_TM_AUTO_READ_1 0x0D +#define SD_TM_AUTO_READ_2 0x0E +#define SD_TM_AUTO_TUNING 0x0F + +/* SD_VPTX_CTL / SD_VPRX_CTL */ +#define PHASE_CHANGE 0x80 +#define PHASE_NOT_RESET 0x40 + +/* SD_DCMPS_TX_CTL / SD_DCMPS_RX_CTL */ +#define DCMPS_CHANGE 0x80 +#define DCMPS_CHANGE_DONE 0x40 +#define DCMPS_ERROR 0x20 +#define DCMPS_CURRENT_PHASE 0x1F + +/* SD Configure 1 Register */ +#define SD_CLK_DIVIDE_0 0x00 +#define SD_CLK_DIVIDE_256 0xC0 +#define SD_CLK_DIVIDE_128 0x80 +#define SD_BUS_WIDTH_1BIT 0x00 +#define SD_BUS_WIDTH_4BIT 0x01 +#define SD_BUS_WIDTH_8BIT 0x02 +#define SD_ASYNC_FIFO_NOT_RST 0x10 +#define SD_20_MODE 0x00 +#define SD_DDR_MODE 0x04 +#define SD_30_MODE 0x08 + +#define SD_CLK_DIVIDE_MASK 0xC0 + +/* SD_CMD_STATE */ +#define SD_CMD_IDLE 0x80 + +/* SD_DATA_STATE */ +#define SD_DATA_IDLE 0x80 + +/* DCM_DRP_CTL */ +#define DCM_RESET 0x08 +#define DCM_LOCKED 0x04 +#define DCM_208M 0x00 +#define DCM_TX 0x01 +#define DCM_RX 0x02 + +/* DCM_DRP_TRIG */ +#define DRP_START 0x80 +#define DRP_DONE 0x40 + +/* DCM_DRP_CFG */ +#define DRP_WRITE 0x80 +#define DRP_READ 0x00 +#define DCM_WRITE_ADDRESS_50 0x50 +#define DCM_WRITE_ADDRESS_51 0x51 +#define DCM_READ_ADDRESS_00 0x00 +#define DCM_READ_ADDRESS_51 0x51 + +/* IRQSTAT0 */ +#define DMA_DONE_INT 0x80 +#define SUSPEND_INT 0x40 +#define LINK_RDY_INT 0x20 +#define LINK_DOWN_INT 0x10 + +/* DMACTL */ +#define DMA_RST 0x80 +#define DMA_BUSY 0x04 +#define DMA_DIR_TO_CARD 0x00 +#define DMA_DIR_FROM_CARD 0x02 +#define DMA_EN 0x01 +#define DMA_128 (0 << 4) +#define DMA_256 (1 << 4) +#define DMA_512 (2 << 4) +#define DMA_1024 (3 << 4) +#define DMA_PACK_SIZE_MASK 0x30 + +/* SSC_CTL1 */ +#define SSC_RSTB 0x80 +#define SSC_8X_EN 0x40 +#define SSC_FIX_FRAC 0x20 +#define SSC_SEL_1M 0x00 +#define SSC_SEL_2M 0x08 +#define SSC_SEL_4M 0x10 +#define SSC_SEL_8M 0x18 + +/* SSC_CTL2 */ +#define SSC_DEPTH_MASK 0x07 +#define SSC_DEPTH_DISALBE 0x00 +#define SSC_DEPTH_4M 0x01 +#define SSC_DEPTH_2M 0x02 +#define SSC_DEPTH_1M 0x03 +#define SSC_DEPTH_500K 0x04 +#define SSC_DEPTH_250K 0x05 + +/* System Clock Control Register */ +#define CLK_LOW_FREQ 0x01 + +/* System Clock Divider Register */ +#define CLK_DIV_1 0x01 +#define CLK_DIV_2 0x02 +#define CLK_DIV_4 0x03 +#define CLK_DIV_8 0x04 + +/* MS_CFG */ +#define SAMPLE_TIME_RISING 0x00 +#define SAMPLE_TIME_FALLING 0x80 +#define PUSH_TIME_DEFAULT 0x00 +#define PUSH_TIME_ODD 0x40 +#define NO_EXTEND_TOGGLE 0x00 +#define EXTEND_TOGGLE_CHK 0x20 +#define MS_BUS_WIDTH_1 0x00 +#define MS_BUS_WIDTH_4 0x10 +#define MS_BUS_WIDTH_8 0x18 +#define MS_2K_SECTOR_MODE 0x04 +#define MS_512_SECTOR_MODE 0x00 +#define MS_TOGGLE_TIMEOUT_EN 0x00 +#define MS_TOGGLE_TIMEOUT_DISEN 0x01 +#define MS_NO_CHECK_INT 0x02 + +/* MS_TRANS_CFG */ +#define WAIT_INT 0x80 +#define NO_WAIT_INT 0x00 +#define NO_AUTO_READ_INT_REG 0x00 +#define AUTO_READ_INT_REG 0x40 +#define MS_CRC16_ERR 0x20 +#define MS_RDY_TIMEOUT 0x10 +#define MS_INT_CMDNK 0x08 +#define MS_INT_BREQ 0x04 +#define MS_INT_ERR 0x02 +#define MS_INT_CED 0x01 + +/* MS_TRANSFER */ +#define MS_TRANSFER_START 0x80 +#define MS_TRANSFER_END 0x40 +#define MS_TRANSFER_ERR 0x20 +#define MS_BS_STATE 0x10 +#define MS_TM_READ_BYTES 0x00 +#define MS_TM_NORMAL_READ 0x01 +#define MS_TM_WRITE_BYTES 0x04 +#define MS_TM_NORMAL_WRITE 0x05 +#define MS_TM_AUTO_READ 0x08 +#define MS_TM_AUTO_WRITE 0x0C + +/* SD Configure 2 Register */ +#define SD_CALCULATE_CRC7 0x00 +#define SD_NO_CALCULATE_CRC7 0x80 +#define SD_CHECK_CRC16 0x00 +#define SD_NO_CHECK_CRC16 0x40 +#define SD_NO_CHECK_WAIT_CRC_TO 0x20 +#define SD_WAIT_BUSY_END 0x08 +#define SD_NO_WAIT_BUSY_END 0x00 +#define SD_CHECK_CRC7 0x00 +#define SD_NO_CHECK_CRC7 0x04 +#define SD_RSP_LEN_0 0x00 +#define SD_RSP_LEN_6 0x01 +#define SD_RSP_LEN_17 0x02 +/* SD/MMC Response Type Definition */ +#define SD_RSP_TYPE_R0 0x04 +#define SD_RSP_TYPE_R1 0x01 +#define SD_RSP_TYPE_R1b 0x09 +#define SD_RSP_TYPE_R2 0x02 +#define SD_RSP_TYPE_R3 0x05 +#define SD_RSP_TYPE_R4 0x05 +#define SD_RSP_TYPE_R5 0x01 +#define SD_RSP_TYPE_R6 0x01 +#define SD_RSP_TYPE_R7 0x01 + +/* SD_CONFIURE3 */ +#define SD_RSP_80CLK_TIMEOUT_EN 0x01 + +/* Card Transfer Reset Register */ +#define SPI_STOP 0x01 +#define XD_STOP 0x02 +#define SD_STOP 0x04 +#define MS_STOP 0x08 +#define SPI_CLR_ERR 0x10 +#define XD_CLR_ERR 0x20 +#define SD_CLR_ERR 0x40 +#define MS_CLR_ERR 0x80 + +/* Card Data Source Register */ +#define PINGPONG_BUFFER 0x01 +#define RING_BUFFER 0x00 + +/* Card Power Control Register */ +#define PMOS_STRG_MASK 0x10 +#define PMOS_STRG_800mA 0x10 +#define PMOS_STRG_400mA 0x00 +#define SD_POWER_OFF 0x03 +#define SD_PARTIAL_POWER_ON 0x01 +#define SD_POWER_ON 0x00 +#define SD_POWER_MASK 0x03 +#define MS_POWER_OFF 0x0C +#define MS_PARTIAL_POWER_ON 0x04 +#define MS_POWER_ON 0x00 +#define MS_POWER_MASK 0x0C +#define BPP_POWER_OFF 0x0F +#define BPP_POWER_5_PERCENT_ON 0x0E +#define BPP_POWER_10_PERCENT_ON 0x0C +#define BPP_POWER_15_PERCENT_ON 0x08 +#define BPP_POWER_ON 0x00 +#define BPP_POWER_MASK 0x0F + +/* PWR_GATE_CTRL */ +#define PWR_GATE_EN 0x01 +#define LDO3318_PWR_MASK 0x06 +#define LDO_ON 0x00 +#define LDO_SUSPEND 0x04 +#define LDO_OFF 0x06 + +/* CARD_CLK_SOURCE */ +#define CRC_FIX_CLK (0x00 << 0) +#define CRC_VAR_CLK0 (0x01 << 0) +#define CRC_VAR_CLK1 (0x02 << 0) +#define SD30_FIX_CLK (0x00 << 2) +#define SD30_VAR_CLK0 (0x01 << 2) +#define SD30_VAR_CLK1 (0x02 << 2) +#define SAMPLE_FIX_CLK (0x00 << 4) +#define SAMPLE_VAR_CLK0 (0x01 << 4) +#define SAMPLE_VAR_CLK1 (0x02 << 4) + +#define MS_CFG 0xFD40 +#define MS_TPC 0xFD41 +#define MS_TRANS_CFG 0xFD42 +#define MS_TRANSFER 0xFD43 +#define MS_INT_REG 0xFD44 +#define MS_BYTE_CNT 0xFD45 +#define MS_SECTOR_CNT_L 0xFD46 +#define MS_SECTOR_CNT_H 0xFD47 +#define MS_DBUS_H 0xFD48 + +#define SD_CFG1 0xFDA0 +#define SD_CFG2 0xFDA1 +#define SD_CFG3 0xFDA2 +#define SD_STAT1 0xFDA3 +#define SD_STAT2 0xFDA4 +#define SD_BUS_STAT 0xFDA5 +#define SD_PAD_CTL 0xFDA6 +#define SD_SAMPLE_POINT_CTL 0xFDA7 +#define SD_PUSH_POINT_CTL 0xFDA8 +#define SD_CMD0 0xFDA9 +#define SD_CMD1 0xFDAA +#define SD_CMD2 0xFDAB +#define SD_CMD3 0xFDAC +#define SD_CMD4 0xFDAD +#define SD_CMD5 0xFDAE +#define SD_BYTE_CNT_L 0xFDAF +#define SD_BYTE_CNT_H 0xFDB0 +#define SD_BLOCK_CNT_L 0xFDB1 +#define SD_BLOCK_CNT_H 0xFDB2 +#define SD_TRANSFER 0xFDB3 +#define SD_CMD_STATE 0xFDB5 +#define SD_DATA_STATE 0xFDB6 + +#define SRCTL 0xFC13 + +#define DCM_DRP_CTL 0xFC23 +#define DCM_DRP_TRIG 0xFC24 +#define DCM_DRP_CFG 0xFC25 +#define DCM_DRP_WR_DATA_L 0xFC26 +#define DCM_DRP_WR_DATA_H 0xFC27 +#define DCM_DRP_RD_DATA_L 0xFC28 +#define DCM_DRP_RD_DATA_H 0xFC29 +#define SD_VPCLK0_CTL 0xFC2A +#define SD_VPCLK1_CTL 0xFC2B +#define SD_DCMPS0_CTL 0xFC2C +#define SD_DCMPS1_CTL 0xFC2D +#define SD_VPTX_CTL SD_VPCLK0_CTL +#define SD_VPRX_CTL SD_VPCLK1_CTL +#define SD_DCMPS_TX_CTL SD_DCMPS0_CTL +#define SD_DCMPS_RX_CTL SD_DCMPS1_CTL +#define CARD_CLK_SOURCE 0xFC2E + +#define CARD_PWR_CTL 0xFD50 +#define CARD_CLK_SWITCH 0xFD51 +#define CARD_SHARE_MODE 0xFD52 +#define CARD_DRIVE_SEL 0xFD53 +#define CARD_STOP 0xFD54 +#define CARD_OE 0xFD55 +#define CARD_AUTO_BLINK 0xFD56 +#define CARD_GPIO_DIR 0xFD57 +#define CARD_GPIO 0xFD58 +#define CARD_DATA_SOURCE 0xFD5B +#define CARD_SELECT 0xFD5C +#define SD30_DRIVE_SEL 0xFD5E +#define CARD_CLK_EN 0xFD69 +#define SDIO_CTRL 0xFD6B +#define CD_PAD_CTL 0xFD73 + +#define FPDCTL 0xFC00 +#define PDINFO 0xFC01 + +#define CLK_CTL 0xFC02 +#define CLK_DIV 0xFC03 +#define CLK_SEL 0xFC04 + +#define SSC_DIV_N_0 0xFC0F +#define SSC_DIV_N_1 0xFC10 +#define SSC_CTL1 0xFC11 +#define SSC_CTL2 0xFC12 + +#define RCCTL 0xFC14 + +#define FPGA_PULL_CTL 0xFC1D +#define OLT_LED_CTL 0xFC1E +#define GPIO_CTL 0xFC1F + +#define LDO_CTL 0xFC1E +#define SYS_VER 0xFC32 + +#define CARD_PULL_CTL1 0xFD60 +#define CARD_PULL_CTL2 0xFD61 +#define CARD_PULL_CTL3 0xFD62 +#define CARD_PULL_CTL4 0xFD63 +#define CARD_PULL_CTL5 0xFD64 +#define CARD_PULL_CTL6 0xFD65 + +/* PCI Express Related Registers */ +#define IRQEN0 0xFE20 +#define IRQSTAT0 0xFE21 +#define IRQEN1 0xFE22 +#define IRQSTAT1 0xFE23 +#define TLPRIEN 0xFE24 +#define TLPRISTAT 0xFE25 +#define TLPTIEN 0xFE26 +#define TLPTISTAT 0xFE27 +#define DMATC0 0xFE28 +#define DMATC1 0xFE29 +#define DMATC2 0xFE2A +#define DMATC3 0xFE2B +#define DMACTL 0xFE2C +#define BCTL 0xFE2D +#define RBBC0 0xFE2E +#define RBBC1 0xFE2F +#define RBDAT 0xFE30 +#define RBCTL 0xFE34 +#define CFGADDR0 0xFE35 +#define CFGADDR1 0xFE36 +#define CFGDATA0 0xFE37 +#define CFGDATA1 0xFE38 +#define CFGDATA2 0xFE39 +#define CFGDATA3 0xFE3A +#define CFGRWCTL 0xFE3B +#define PHYRWCTL 0xFE3C +#define PHYDATA0 0xFE3D +#define PHYDATA1 0xFE3E +#define PHYADDR 0xFE3F +#define MSGRXDATA0 0xFE40 +#define MSGRXDATA1 0xFE41 +#define MSGRXDATA2 0xFE42 +#define MSGRXDATA3 0xFE43 +#define MSGTXDATA0 0xFE44 +#define MSGTXDATA1 0xFE45 +#define MSGTXDATA2 0xFE46 +#define MSGTXDATA3 0xFE47 +#define MSGTXCTL 0xFE48 +#define PETXCFG 0xFE49 + +#define CDRESUMECTL 0xFE52 +#define WAKE_SEL_CTL 0xFE54 +#define PME_FORCE_CTL 0xFE56 +#define ASPM_FORCE_CTL 0xFE57 +#define PM_CLK_FORCE_CTL 0xFE58 +#define PERST_GLITCH_WIDTH 0xFE5C +#define CHANGE_LINK_STATE 0xFE5B +#define RESET_LOAD_REG 0xFE5E +#define EFUSE_CONTENT 0xFE5F +#define HOST_SLEEP_STATE 0xFE60 +#define SDIO_CFG 0xFE70 + +#define NFTS_TX_CTRL 0xFE72 + +#define PWR_GATE_CTRL 0xFE75 +#define PWD_SUSPEND_EN 0xFE76 +#define LDO_PWR_SEL 0xFE78 + +#define DUMMY_REG_RESET_0 0xFE90 + +/* Memory mapping */ +#define SRAM_BASE 0xE600 +#define RBUF_BASE 0xF400 +#define PPBUF_BASE1 0xF800 +#define PPBUF_BASE2 0xFA00 +#define IMAGE_FLAG_ADDR0 0xCE80 +#define IMAGE_FLAG_ADDR1 0xCE81 + +#define rtsx_pci_init_cmd(pcr) ((pcr)->ci = 0) + +struct rtsx_pcr; + +struct pcr_handle { + struct rtsx_pcr *pcr; +}; + +struct pcr_ops { + int (*extra_init_hw)(struct rtsx_pcr *pcr); + int (*optimize_phy)(struct rtsx_pcr *pcr); + int (*turn_on_led)(struct rtsx_pcr *pcr); + int (*turn_off_led)(struct rtsx_pcr *pcr); + int (*enable_auto_blink)(struct rtsx_pcr *pcr); + int (*disable_auto_blink)(struct rtsx_pcr *pcr); + int (*card_power_on)(struct rtsx_pcr *pcr, int card); + int (*card_power_off)(struct rtsx_pcr *pcr, int card); + unsigned int (*cd_deglitch)(struct rtsx_pcr *pcr); +}; + +enum PDEV_STAT {PDEV_STAT_IDLE, PDEV_STAT_RUN}; + +struct rtsx_pcr { + struct pci_dev *pci; + unsigned int id; + + /* pci resources */ + unsigned long addr; + void __iomem *remap_addr; + int irq; + + /* host reserved buffer */ + void *rtsx_resv_buf; + dma_addr_t rtsx_resv_buf_addr; + + void *host_cmds_ptr; + dma_addr_t host_cmds_addr; + int ci; + + void *host_sg_tbl_ptr; + dma_addr_t host_sg_tbl_addr; + int sgi; + + u32 bier; + char trans_result; + + unsigned int card_inserted; + unsigned int card_removed; + + struct delayed_work carddet_work; + struct delayed_work idle_work; + + spinlock_t lock; + struct mutex pcr_mutex; + struct completion *done; + struct completion *finish_me; + + unsigned int cur_clock; + bool ms_pmos; + bool remove_pci; + bool msi_en; + +#define EXTRA_CAPS_SD_SDR50 (1 << 0) +#define EXTRA_CAPS_SD_SDR104 (1 << 1) +#define EXTRA_CAPS_SD_DDR50 (1 << 2) +#define EXTRA_CAPS_MMC_HSDDR (1 << 3) +#define EXTRA_CAPS_MMC_HS200 (1 << 4) +#define EXTRA_CAPS_MMC_8BIT (1 << 5) + u32 extra_caps; + +#define IC_VER_A 0 +#define IC_VER_B 1 +#define IC_VER_C 2 +#define IC_VER_D 3 + u8 ic_version; + + const u32 *sd_pull_ctl_enable_tbl; + const u32 *sd_pull_ctl_disable_tbl; + const u32 *ms_pull_ctl_enable_tbl; + const u32 *ms_pull_ctl_disable_tbl; + + const struct pcr_ops *ops; + enum PDEV_STAT state; + + int num_slots; + struct rtsx_slot *slots; +}; + +#define CHK_PCI_PID(pcr, pid) ((pcr)->pci->device == (pid)) +#define PCI_VID(pcr) ((pcr)->pci->vendor) +#define PCI_PID(pcr) ((pcr)->pci->device) + +void rtsx_pci_start_run(struct rtsx_pcr *pcr); +int rtsx_pci_write_register(struct rtsx_pcr *pcr, u16 addr, u8 mask, u8 data); +int rtsx_pci_read_register(struct rtsx_pcr *pcr, u16 addr, u8 *data); +int rtsx_pci_write_phy_register(struct rtsx_pcr *pcr, u8 addr, u16 val); +int rtsx_pci_read_phy_register(struct rtsx_pcr *pcr, u8 addr, u16 *val); +void rtsx_pci_stop_cmd(struct rtsx_pcr *pcr); +void rtsx_pci_add_cmd(struct rtsx_pcr *pcr, + u8 cmd_type, u16 reg_addr, u8 mask, u8 data); +void rtsx_pci_send_cmd_no_wait(struct rtsx_pcr *pcr); +int rtsx_pci_send_cmd(struct rtsx_pcr *pcr, int timeout); +int rtsx_pci_transfer_data(struct rtsx_pcr *pcr, struct scatterlist *sglist, + int num_sg, bool read, int timeout); +int rtsx_pci_read_ppbuf(struct rtsx_pcr *pcr, u8 *buf, int buf_len); +int rtsx_pci_write_ppbuf(struct rtsx_pcr *pcr, u8 *buf, int buf_len); +int rtsx_pci_card_pull_ctl_enable(struct rtsx_pcr *pcr, int card); +int rtsx_pci_card_pull_ctl_disable(struct rtsx_pcr *pcr, int card); +int rtsx_pci_switch_clock(struct rtsx_pcr *pcr, unsigned int card_clock, + u8 ssc_depth, bool initial_mode, bool double_clk, bool vpclk); +int rtsx_pci_card_power_on(struct rtsx_pcr *pcr, int card); +int rtsx_pci_card_power_off(struct rtsx_pcr *pcr, int card); +unsigned int rtsx_pci_card_exist(struct rtsx_pcr *pcr); +void rtsx_pci_complete_unfinished_transfer(struct rtsx_pcr *pcr); + +static inline u8 *rtsx_pci_get_cmd_data(struct rtsx_pcr *pcr) +{ + return (u8 *)(pcr->host_cmds_ptr); +} + +#endif diff --git a/include/linux/mfd/tps65090.h b/include/linux/mfd/tps65090.h index 6bc31d854626..804e280c1e1d 100644 --- a/include/linux/mfd/tps65090.h +++ b/include/linux/mfd/tps65090.h @@ -24,6 +24,25 @@ #include <linux/irq.h> +/* TPS65090 Regulator ID */ +enum { + TPS65090_REGULATOR_DCDC1, + TPS65090_REGULATOR_DCDC2, + TPS65090_REGULATOR_DCDC3, + TPS65090_REGULATOR_FET1, + TPS65090_REGULATOR_FET2, + TPS65090_REGULATOR_FET3, + TPS65090_REGULATOR_FET4, + TPS65090_REGULATOR_FET5, + TPS65090_REGULATOR_FET6, + TPS65090_REGULATOR_FET7, + TPS65090_REGULATOR_LDO1, + TPS65090_REGULATOR_LDO2, + + /* Last entry for maximum ID */ + TPS65090_REGULATOR_MAX, +}; + struct tps65090 { struct mutex lock; struct device *dev; @@ -41,10 +60,26 @@ struct tps65090_subdev_info { void *platform_data; }; +/* + * struct tps65090_regulator_plat_data + * + * @reg_init_data: The regulator init data. + * @enable_ext_control: Enable extrenal control or not. Only available for + * DCDC1, DCDC2 and DCDC3. + * @gpio: Gpio number if external control is enabled and controlled through + * gpio. + */ +struct tps65090_regulator_plat_data { + struct regulator_init_data *reg_init_data; + bool enable_ext_control; + int gpio; +}; + struct tps65090_platform_data { int irq_base; int num_subdevs; struct tps65090_subdev_info *subdevs; + struct tps65090_regulator_plat_data *reg_pdata[TPS65090_REGULATOR_MAX]; }; /* diff --git a/include/linux/mfd/tps6586x.h b/include/linux/mfd/tps6586x.h index 2dd123194958..f8da0e152567 100644 --- a/include/linux/mfd/tps6586x.h +++ b/include/linux/mfd/tps6586x.h @@ -29,6 +29,7 @@ enum { TPS6586X_ID_LDO_8, TPS6586X_ID_LDO_9, TPS6586X_ID_LDO_RTC, + TPS6586X_ID_MAX_REGULATOR, }; enum { @@ -79,6 +80,8 @@ struct tps6586x_platform_data { int gpio_base; int irq_base; bool pm_off; + + struct regulator_init_data *reg_init_data[TPS6586X_ID_MAX_REGULATOR]; }; /* diff --git a/include/linux/mfd/wm8994/core.h b/include/linux/mfd/wm8994/core.h index 1f173306bf05..ae5c249530b4 100644 --- a/include/linux/mfd/wm8994/core.h +++ b/include/linux/mfd/wm8994/core.h @@ -19,6 +19,8 @@ #include <linux/interrupt.h> #include <linux/regmap.h> +#include <linux/mfd/wm8994/pdata.h> + enum wm8994_type { WM8994 = 0, WM8958 = 1, @@ -55,6 +57,8 @@ struct regulator_bulk_data; struct wm8994 { struct mutex irq_lock; + struct wm8994_pdata pdata; + enum wm8994_type type; int revision; int cust_id; diff --git a/include/linux/mfd/wm8994/pdata.h b/include/linux/mfd/wm8994/pdata.h index fc87be4fdc25..8e21a094836d 100644 --- a/include/linux/mfd/wm8994/pdata.h +++ b/include/linux/mfd/wm8994/pdata.h @@ -176,6 +176,11 @@ struct wm8994_pdata { unsigned int lineout1fb:1; unsigned int lineout2fb:1; + /* Delay between detecting a jack and starting microphone + * detect (specified in ms) + */ + int micdet_delay; + /* IRQ for microphone detection if brought out directly as a * signal. */ diff --git a/include/linux/micrel_phy.h b/include/linux/micrel_phy.h index de201203bc7c..adfe8c058f29 100644 --- a/include/linux/micrel_phy.h +++ b/include/linux/micrel_phy.h @@ -15,6 +15,7 @@ #define MICREL_PHY_ID_MASK 0x00fffff0 +#define PHY_ID_KSZ8873MLL 0x000e7237 #define PHY_ID_KSZ9021 0x00221610 #define PHY_ID_KS8737 0x00221720 #define PHY_ID_KSZ8021 0x00221555 diff --git a/include/linux/migrate.h b/include/linux/migrate.h index ce7e6671968b..0b5865c61efd 100644 --- a/include/linux/migrate.h +++ b/include/linux/migrate.h @@ -7,9 +7,27 @@ typedef struct page *new_page_t(struct page *, unsigned long private, int **); +/* + * Return values from addresss_space_operations.migratepage(): + * - negative errno on page migration failure; + * - zero on page migration success; + * + * The balloon page migration introduces this special case where a 'distinct' + * return code is used to flag a successful page migration to unmap_and_move(). + * This approach is necessary because page migration can race against balloon + * deflation procedure, and for such case we could introduce a nasty page leak + * if a successfully migrated balloon page gets released concurrently with + * migration's unmap_and_move() wrap-up steps. + */ +#define MIGRATEPAGE_SUCCESS 0 +#define MIGRATEPAGE_BALLOON_SUCCESS 1 /* special ret code for balloon page + * sucessful migration case. + */ + #ifdef CONFIG_MIGRATION extern void putback_lru_pages(struct list_head *l); +extern void putback_movable_pages(struct list_head *l); extern int migrate_page(struct address_space *, struct page *, struct page *, enum migrate_mode); extern int migrate_pages(struct list_head *l, new_page_t x, @@ -33,6 +51,7 @@ extern int migrate_huge_page_move_mapping(struct address_space *mapping, #else static inline void putback_lru_pages(struct list_head *l) {} +static inline void putback_movable_pages(struct list_head *l) {} static inline int migrate_pages(struct list_head *l, new_page_t x, unsigned long private, bool offlining, enum migrate_mode mode) { return -ENOSYS; } diff --git a/include/linux/miscdevice.h b/include/linux/miscdevice.h index e0deeb2cc939..09c2300ddb37 100644 --- a/include/linux/miscdevice.h +++ b/include/linux/miscdevice.h @@ -34,6 +34,7 @@ #define MWAVE_MINOR 219 /* ACP/Mwave Modem */ #define MPT_MINOR 220 #define MPT2SAS_MINOR 221 +#define MPT3SAS_MINOR 222 #define UINPUT_MINOR 223 #define MISC_MCELOG_MINOR 227 #define HPET_MINOR 228 diff --git a/include/linux/mlx4/device.h b/include/linux/mlx4/device.h index 6d1acb04cd17..21821da2abfd 100644 --- a/include/linux/mlx4/device.h +++ b/include/linux/mlx4/device.h @@ -142,6 +142,8 @@ enum { MLX4_DEV_CAP_FLAG_COUNTERS = 1LL << 48, MLX4_DEV_CAP_FLAG_SENSE_SUPPORT = 1LL << 55, MLX4_DEV_CAP_FLAG_PORT_MNG_CHG_EV = 1LL << 59, + MLX4_DEV_CAP_FLAG_64B_EQE = 1LL << 61, + MLX4_DEV_CAP_FLAG_64B_CQE = 1LL << 62 }; enum { @@ -151,6 +153,20 @@ enum { MLX4_DEV_CAP_FLAG2_FS_EN = 1LL << 3 }; +enum { + MLX4_DEV_CAP_64B_EQE_ENABLED = 1LL << 0, + MLX4_DEV_CAP_64B_CQE_ENABLED = 1LL << 1 +}; + +enum { + MLX4_USER_DEV_CAP_64B_CQE = 1L << 0 +}; + +enum { + MLX4_FUNC_CAP_64B_EQE_CQE = 1L << 0 +}; + + #define MLX4_ATTR_EXTENDED_PORT_INFO cpu_to_be16(0xff90) enum { @@ -419,6 +435,11 @@ struct mlx4_caps { u32 max_counters; u8 port_ib_mtu[MLX4_MAX_PORTS + 1]; u16 sqp_demux; + u32 eqe_size; + u32 cqe_size; + u8 eqe_factor; + u32 userspace_caps; /* userspace must be aware of these */ + u32 function_caps; /* VFs must be aware of these */ }; struct mlx4_buf_list { diff --git a/include/linux/mm.h b/include/linux/mm.h index bcaab4e6fe91..4af4f0b1be4c 100644 --- a/include/linux/mm.h +++ b/include/linux/mm.h @@ -1456,6 +1456,37 @@ extern unsigned long vm_mmap(struct file *, unsigned long, unsigned long, unsigned long, unsigned long, unsigned long); +struct vm_unmapped_area_info { +#define VM_UNMAPPED_AREA_TOPDOWN 1 + unsigned long flags; + unsigned long length; + unsigned long low_limit; + unsigned long high_limit; + unsigned long align_mask; + unsigned long align_offset; +}; + +extern unsigned long unmapped_area(struct vm_unmapped_area_info *info); +extern unsigned long unmapped_area_topdown(struct vm_unmapped_area_info *info); + +/* + * Search for an unmapped address range. + * + * We are looking for a range that: + * - does not intersect with any VMA; + * - is contained within the [low_limit, high_limit) interval; + * - is at least the desired size. + * - satisfies (begin_addr & align_mask) == (align_offset & align_mask) + */ +static inline unsigned long +vm_unmapped_area(struct vm_unmapped_area_info *info) +{ + if (!(info->flags & VM_UNMAPPED_AREA_TOPDOWN)) + return unmapped_area(info); + else + return unmapped_area_topdown(info); +} + /* truncate.c */ extern void truncate_inode_pages(struct address_space *, loff_t); extern void truncate_inode_pages_range(struct address_space *, diff --git a/include/linux/mm_types.h b/include/linux/mm_types.h index 31f8a3af7d94..7ade2731b5d6 100644 --- a/include/linux/mm_types.h +++ b/include/linux/mm_types.h @@ -224,7 +224,8 @@ struct vm_region { * library, the executable area etc). */ struct vm_area_struct { - struct mm_struct * vm_mm; /* The address space we belong to. */ + /* The first cache line has the info for VMA tree walking. */ + unsigned long vm_start; /* Our start address within vm_mm. */ unsigned long vm_end; /* The first byte after our end address within vm_mm. */ @@ -232,11 +233,22 @@ struct vm_area_struct { /* linked list of VM areas per task, sorted by address */ struct vm_area_struct *vm_next, *vm_prev; + struct rb_node vm_rb; + + /* + * Largest free memory gap in bytes to the left of this VMA. + * Either between this VMA and vma->vm_prev, or between one of the + * VMAs below us in the VMA rbtree and its ->vm_prev. This helps + * get_unmapped_area find a free area of the right size. + */ + unsigned long rb_subtree_gap; + + /* Second cache line starts here. */ + + struct mm_struct *vm_mm; /* The address space we belong to. */ pgprot_t vm_page_prot; /* Access permissions of this VMA. */ unsigned long vm_flags; /* Flags, see mm.h. */ - struct rb_node vm_rb; - /* * For areas with an address space and backing store, * linkage into the address_space->i_mmap interval tree, or @@ -322,6 +334,7 @@ struct mm_struct { unsigned long task_size; /* size of task vm space */ unsigned long cached_hole_size; /* if non-zero, the largest hole below free_area_cache */ unsigned long free_area_cache; /* first hole of size cached_hole_size or larger */ + unsigned long highest_vm_end; /* highest vma end address */ pgd_t * pgd; atomic_t mm_users; /* How many users with user space? */ atomic_t mm_count; /* How many references to "struct mm_struct" (users count as 1) */ diff --git a/include/linux/mman.h b/include/linux/mman.h index d09dde1e57fb..9aa863da287f 100644 --- a/include/linux/mman.h +++ b/include/linux/mman.h @@ -11,6 +11,8 @@ extern int sysctl_overcommit_memory; extern int sysctl_overcommit_ratio; extern struct percpu_counter vm_committed_as; +unsigned long vm_memory_committed(void); + static inline void vm_acct_memory(long pages) { percpu_counter_add(&vm_committed_as, pages); diff --git a/include/linux/mmc/card.h b/include/linux/mmc/card.h index 943550dfe9ea..5c69315d60cc 100644 --- a/include/linux/mmc/card.h +++ b/include/linux/mmc/card.h @@ -85,6 +85,7 @@ struct mmc_ext_csd { bool boot_ro_lockable; u8 raw_exception_status; /* 53 */ u8 raw_partition_support; /* 160 */ + u8 raw_rpmb_size_mult; /* 168 */ u8 raw_erased_mem_count; /* 181 */ u8 raw_ext_csd_structure; /* 194 */ u8 raw_card_type; /* 196 */ @@ -206,6 +207,7 @@ struct mmc_part { #define MMC_BLK_DATA_AREA_MAIN (1<<0) #define MMC_BLK_DATA_AREA_BOOT (1<<1) #define MMC_BLK_DATA_AREA_GP (1<<2) +#define MMC_BLK_DATA_AREA_RPMB (1<<3) }; /* diff --git a/include/linux/mmc/core.h b/include/linux/mmc/core.h index 9b9cdafc7737..5bf7c2274fcb 100644 --- a/include/linux/mmc/core.h +++ b/include/linux/mmc/core.h @@ -170,6 +170,8 @@ extern int mmc_erase_group_aligned(struct mmc_card *card, unsigned int from, extern unsigned int mmc_calc_max_discard(struct mmc_card *card); extern int mmc_set_blocklen(struct mmc_card *card, unsigned int blocklen); +extern int mmc_set_blockcount(struct mmc_card *card, unsigned int blockcount, + bool is_rel_write); extern int mmc_hw_reset(struct mmc_host *host); extern int mmc_hw_reset_check(struct mmc_host *host); extern int mmc_can_reset(struct mmc_card *card); diff --git a/include/linux/mmc/dw_mmc.h b/include/linux/mmc/dw_mmc.h index 96531664a061..34be4f47293c 100644 --- a/include/linux/mmc/dw_mmc.h +++ b/include/linux/mmc/dw_mmc.h @@ -229,8 +229,9 @@ struct dw_mci_board { u32 quirks; /* Workaround / Quirk flags */ unsigned int bus_hz; /* Clock speed at the cclk_in pad */ - unsigned int caps; /* Capabilities */ - unsigned int caps2; /* More capabilities */ + u32 caps; /* Capabilities */ + u32 caps2; /* More capabilities */ + u32 pm_caps; /* PM capabilities */ /* * Override fifo depth. If 0, autodetect it from the FIFOTH register, * but note that this may not be reliable after a bootloader has used diff --git a/include/linux/mmc/host.h b/include/linux/mmc/host.h index 7abb0e1f7bda..61a10c17aabd 100644 --- a/include/linux/mmc/host.h +++ b/include/linux/mmc/host.h @@ -53,12 +53,12 @@ struct mmc_ios { #define MMC_TIMING_LEGACY 0 #define MMC_TIMING_MMC_HS 1 #define MMC_TIMING_SD_HS 2 -#define MMC_TIMING_UHS_SDR12 MMC_TIMING_LEGACY -#define MMC_TIMING_UHS_SDR25 MMC_TIMING_SD_HS -#define MMC_TIMING_UHS_SDR50 3 -#define MMC_TIMING_UHS_SDR104 4 -#define MMC_TIMING_UHS_DDR50 5 -#define MMC_TIMING_MMC_HS200 6 +#define MMC_TIMING_UHS_SDR12 3 +#define MMC_TIMING_UHS_SDR25 4 +#define MMC_TIMING_UHS_SDR50 5 +#define MMC_TIMING_UHS_SDR104 6 +#define MMC_TIMING_UHS_DDR50 7 +#define MMC_TIMING_MMC_HS200 8 #define MMC_SDR_MODE 0 #define MMC_1_2V_DDR_MODE 1 @@ -136,6 +136,7 @@ struct mmc_host_ops { void (*enable_preset_value)(struct mmc_host *host, bool enable); int (*select_drive_strength)(unsigned int max_dtr, int host_drv, int card_drv); void (*hw_reset)(struct mmc_host *host); + void (*card_event)(struct mmc_host *host); }; struct mmc_card; @@ -211,7 +212,7 @@ struct mmc_host { #define MMC_VDD_34_35 0x00400000 /* VDD voltage 3.4 ~ 3.5 */ #define MMC_VDD_35_36 0x00800000 /* VDD voltage 3.5 ~ 3.6 */ - unsigned long caps; /* Host capabilities */ + u32 caps; /* Host capabilities */ #define MMC_CAP_4_BIT_DATA (1 << 0) /* Can the host do 4 bit transfers */ #define MMC_CAP_MMC_HIGHSPEED (1 << 1) /* Can do MMC high-speed timing */ @@ -241,7 +242,7 @@ struct mmc_host { #define MMC_CAP_CMD23 (1 << 30) /* CMD23 supported. */ #define MMC_CAP_HW_RESET (1 << 31) /* Hardware reset */ - unsigned int caps2; /* More host capabilities */ + u32 caps2; /* More host capabilities */ #define MMC_CAP2_BOOTPART_NOACC (1 << 0) /* Boot partition no access */ #define MMC_CAP2_CACHE_CTRL (1 << 1) /* Allow cache control */ diff --git a/include/linux/mmc/mmc.h b/include/linux/mmc/mmc.h index 01e4b394029b..94d532e41c61 100644 --- a/include/linux/mmc/mmc.h +++ b/include/linux/mmc/mmc.h @@ -286,6 +286,7 @@ struct _mmc_csd { #define EXT_CSD_BKOPS_START 164 /* W */ #define EXT_CSD_SANITIZE_START 165 /* W */ #define EXT_CSD_WR_REL_PARAM 166 /* RO */ +#define EXT_CSD_RPMB_MULT 168 /* RO */ #define EXT_CSD_BOOT_WP 173 /* R/W */ #define EXT_CSD_ERASE_GROUP_DEF 175 /* R/W */ #define EXT_CSD_PART_CONFIG 179 /* R/W */ @@ -339,6 +340,7 @@ struct _mmc_csd { #define EXT_CSD_PART_CONFIG_ACC_MASK (0x7) #define EXT_CSD_PART_CONFIG_ACC_BOOT0 (0x1) +#define EXT_CSD_PART_CONFIG_ACC_RPMB (0x3) #define EXT_CSD_PART_CONFIG_ACC_GP0 (0x4) #define EXT_CSD_PART_SUPPORT_PART_EN (0x1) diff --git a/include/linux/mmc/mxs-mmc.h b/include/linux/mmc/mxs-mmc.h deleted file mode 100644 index 7c2ad3a7f2f3..000000000000 --- a/include/linux/mmc/mxs-mmc.h +++ /dev/null @@ -1,19 +0,0 @@ -/* - * Copyright 2011 Freescale Semiconductor, Inc. All Rights Reserved. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#ifndef __LINUX_MMC_MXS_MMC_H__ -#define __LINUX_MMC_MXS_MMC_H__ - -struct mxs_mmc_platform_data { - int wp_gpio; /* write protect pin */ - unsigned int flags; -#define SLOTF_4_BIT_CAPABLE (1 << 0) -#define SLOTF_8_BIT_CAPABLE (1 << 1) -}; - -#endif /* __LINUX_MMC_MXS_MMC_H__ */ diff --git a/include/linux/mmc/sdhci.h b/include/linux/mmc/sdhci.h index 1edcb4dad8c4..4bbc3301fbbf 100644 --- a/include/linux/mmc/sdhci.h +++ b/include/linux/mmc/sdhci.h @@ -92,6 +92,8 @@ struct sdhci_host { #define SDHCI_QUIRK2_HOST_OFF_CARD_ON (1<<0) #define SDHCI_QUIRK2_HOST_NO_CMD23 (1<<1) +/* The system physically doesn't support 1.8v, even if the host does */ +#define SDHCI_QUIRK2_NO_1_8_V (1<<2) int irq; /* Device IRQ */ void __iomem *ioaddr; /* Mapped address */ @@ -158,8 +160,8 @@ struct sdhci_host { struct timer_list timer; /* Timer for timeouts */ - unsigned int caps; /* Alternative CAPABILITY_0 */ - unsigned int caps1; /* Alternative CAPABILITY_1 */ + u32 caps; /* Alternative CAPABILITY_0 */ + u32 caps1; /* Alternative CAPABILITY_1 */ unsigned int ocr_avail_sdio; /* OCR bit masks */ unsigned int ocr_avail_sd; diff --git a/include/linux/mmzone.h b/include/linux/mmzone.h index a23923ba8263..cd55dad56aac 100644 --- a/include/linux/mmzone.h +++ b/include/linux/mmzone.h @@ -63,10 +63,8 @@ enum { #ifdef CONFIG_CMA # define is_migrate_cma(migratetype) unlikely((migratetype) == MIGRATE_CMA) -# define cma_wmark_pages(zone) zone->min_cma_pages #else # define is_migrate_cma(migratetype) false -# define cma_wmark_pages(zone) 0 #endif #define for_each_migratetype_order(order, type) \ @@ -383,13 +381,6 @@ struct zone { /* see spanned/present_pages for more description */ seqlock_t span_seqlock; #endif -#ifdef CONFIG_CMA - /* - * CMA needs to increase watermark levels during the allocation - * process to make sure that the system is not starved. - */ - unsigned long min_cma_pages; -#endif struct free_area free_area[MAX_ORDER]; #ifndef CONFIG_SPARSEMEM @@ -469,17 +460,44 @@ struct zone { unsigned long zone_start_pfn; /* - * zone_start_pfn, spanned_pages and present_pages are all - * protected by span_seqlock. It is a seqlock because it has - * to be read outside of zone->lock, and it is done in the main - * allocator path. But, it is written quite infrequently. + * spanned_pages is the total pages spanned by the zone, including + * holes, which is calculated as: + * spanned_pages = zone_end_pfn - zone_start_pfn; + * + * present_pages is physical pages existing within the zone, which + * is calculated as: + * present_pages = spanned_pages - absent_pages(pags in holes); * - * The lock is declared along with zone->lock because it is + * managed_pages is present pages managed by the buddy system, which + * is calculated as (reserved_pages includes pages allocated by the + * bootmem allocator): + * managed_pages = present_pages - reserved_pages; + * + * So present_pages may be used by memory hotplug or memory power + * management logic to figure out unmanaged pages by checking + * (present_pages - managed_pages). And managed_pages should be used + * by page allocator and vm scanner to calculate all kinds of watermarks + * and thresholds. + * + * Locking rules: + * + * zone_start_pfn and spanned_pages are protected by span_seqlock. + * It is a seqlock because it has to be read outside of zone->lock, + * and it is done in the main allocator path. But, it is written + * quite infrequently. + * + * The span_seq lock is declared along with zone->lock because it is * frequently read in proximity to zone->lock. It's good to * give them a chance of being in the same cacheline. + * + * Write access to present_pages and managed_pages at runtime should + * be protected by lock_memory_hotplug()/unlock_memory_hotplug(). + * Any reader who can't tolerant drift of present_pages and + * managed_pages should hold memory hotplug lock to get a stable value. */ - unsigned long spanned_pages; /* total size, including holes */ - unsigned long present_pages; /* amount of memory (excluding holes) */ + unsigned long spanned_pages; + unsigned long present_pages; + unsigned long managed_pages; /* * rarely used fields: diff --git a/include/linux/netdevice.h b/include/linux/netdevice.h index f8eda0276f03..02e0f6b156c3 100644 --- a/include/linux/netdevice.h +++ b/include/linux/netdevice.h @@ -369,7 +369,7 @@ typedef enum gro_result gro_result_t; * * If the rx_handler consider the skb should be ignored, it should return * RX_HANDLER_EXACT. The skb will only be delivered to protocol handlers that - * are registred on exact device (ptype->dev == skb->dev). + * are registered on exact device (ptype->dev == skb->dev). * * If the rx_handler didn't changed skb->dev, but want the skb to be normally * delivered, it should return RX_HANDLER_PASS. @@ -887,6 +887,10 @@ struct netdev_fcoe_hbainfo { * struct net_device *dev, int idx) * Used to add FDB entries to dump requests. Implementers should add * entries to skb and update idx with the number of entries. + * + * int (*ndo_bridge_setlink)(struct net_device *dev, struct nlmsghdr *nlh) + * int (*ndo_bridge_getlink)(struct sk_buff *skb, u32 pid, u32 seq, + * struct net_device *dev) */ struct net_device_ops { int (*ndo_init)(struct net_device *dev); @@ -998,6 +1002,12 @@ struct net_device_ops { struct netlink_callback *cb, struct net_device *dev, int idx); + + int (*ndo_bridge_setlink)(struct net_device *dev, + struct nlmsghdr *nlh); + int (*ndo_bridge_getlink)(struct sk_buff *skb, + u32 pid, u32 seq, + struct net_device *dev); }; /* @@ -1053,6 +1063,12 @@ struct net_device { netdev_features_t wanted_features; /* mask of features inheritable by VLAN devices */ netdev_features_t vlan_features; + /* mask of features inherited by encapsulating devices + * This field indicates what encapsulation offloads + * the hardware is capable of doing, and drivers will + * need to set them appropriately. + */ + netdev_features_t hw_enc_features; /* Interface index. Unique device identifier */ int ifindex; @@ -1488,6 +1504,9 @@ struct napi_gro_cb { /* Used in ipv6_gro_receive() */ int proto; + + /* used in skb_gro_receive() slow path */ + struct sk_buff *last; }; #define NAPI_GRO_CB(skb) ((struct napi_gro_cb *)(skb)->cb) @@ -1499,16 +1518,25 @@ struct packet_type { struct net_device *, struct packet_type *, struct net_device *); + bool (*id_match)(struct packet_type *ptype, + struct sock *sk); + void *af_packet_priv; + struct list_head list; +}; + +struct offload_callbacks { struct sk_buff *(*gso_segment)(struct sk_buff *skb, netdev_features_t features); int (*gso_send_check)(struct sk_buff *skb); struct sk_buff **(*gro_receive)(struct sk_buff **head, struct sk_buff *skb); int (*gro_complete)(struct sk_buff *skb); - bool (*id_match)(struct packet_type *ptype, - struct sock *sk); - void *af_packet_priv; - struct list_head list; +}; + +struct packet_offload { + __be16 type; /* This is really htons(ether_type). */ + struct offload_callbacks callbacks; + struct list_head list; }; #include <linux/notifier.h> @@ -1548,6 +1576,8 @@ extern int call_netdevice_notifiers(unsigned long val, struct net_device *dev); extern rwlock_t dev_base_lock; /* Device list lock */ +extern seqlock_t devnet_rename_seq; /* Device rename lock */ + #define for_each_netdev(net, d) \ list_for_each_entry(d, &(net)->dev_base_head, dev_list) @@ -1605,6 +1635,9 @@ extern struct net_device *__dev_getfirstbyhwtype(struct net *net, unsigned short extern void dev_add_pack(struct packet_type *pt); extern void dev_remove_pack(struct packet_type *pt); extern void __dev_remove_pack(struct packet_type *pt); +extern void dev_add_offload(struct packet_offload *po); +extern void dev_remove_offload(struct packet_offload *po); +extern void __dev_remove_offload(struct packet_offload *po); extern struct net_device *dev_get_by_flags_rcu(struct net *net, unsigned short flags, unsigned short mask); @@ -2129,16 +2162,10 @@ extern void dev_kfree_skb_any(struct sk_buff *skb); extern int netif_rx(struct sk_buff *skb); extern int netif_rx_ni(struct sk_buff *skb); extern int netif_receive_skb(struct sk_buff *skb); -extern gro_result_t dev_gro_receive(struct napi_struct *napi, - struct sk_buff *skb); -extern gro_result_t napi_skb_finish(gro_result_t ret, struct sk_buff *skb); extern gro_result_t napi_gro_receive(struct napi_struct *napi, struct sk_buff *skb); extern void napi_gro_flush(struct napi_struct *napi, bool flush_old); extern struct sk_buff * napi_get_frags(struct napi_struct *napi); -extern gro_result_t napi_frags_finish(struct napi_struct *napi, - struct sk_buff *skb, - gro_result_t ret); extern gro_result_t napi_gro_frags(struct napi_struct *napi); static inline void napi_free_frags(struct napi_struct *napi) diff --git a/include/linux/netfilter_ipv6/ip6_tables.h b/include/linux/netfilter_ipv6/ip6_tables.h index 5f84c6229dc6..610208b18c05 100644 --- a/include/linux/netfilter_ipv6/ip6_tables.h +++ b/include/linux/netfilter_ipv6/ip6_tables.h @@ -47,15 +47,6 @@ ip6t_ext_hdr(u8 nexthdr) (nexthdr == IPPROTO_DSTOPTS); } -enum { - IP6T_FH_F_FRAG = (1 << 0), - IP6T_FH_F_AUTH = (1 << 1), -}; - -/* find specified header and get offset to it */ -extern int ipv6_find_hdr(const struct sk_buff *skb, unsigned int *offset, - int target, unsigned short *fragoff, int *fragflg); - #ifdef CONFIG_COMPAT #include <net/compat.h> diff --git a/include/linux/nfc/pn544.h b/include/linux/nfc/pn544.h deleted file mode 100644 index 9890bbaf4328..000000000000 --- a/include/linux/nfc/pn544.h +++ /dev/null @@ -1,104 +0,0 @@ -/* - * Driver include for the PN544 NFC chip. - * - * Copyright (C) Nokia Corporation - * - * Author: Jari Vanhala <ext-jari.vanhala@nokia.com> - * Contact: Matti Aaltoenn <matti.j.aaltonen@nokia.com> - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * version 2 as published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ - -#ifndef _PN544_H_ -#define _PN544_H_ - -#include <linux/i2c.h> - -#define PN544_DRIVER_NAME "pn544" -#define PN544_MAXWINDOW_SIZE 7 -#define PN544_WINDOW_SIZE 4 -#define PN544_RETRIES 10 -#define PN544_MAX_I2C_TRANSFER 0x0400 -#define PN544_MSG_MAX_SIZE 0x21 /* at normal HCI mode */ - -/* ioctl */ -#define PN544_CHAR_BASE 'P' -#define PN544_IOR(num, dtype) _IOR(PN544_CHAR_BASE, num, dtype) -#define PN544_IOW(num, dtype) _IOW(PN544_CHAR_BASE, num, dtype) -#define PN544_GET_FW_MODE PN544_IOW(1, unsigned int) -#define PN544_SET_FW_MODE PN544_IOW(2, unsigned int) -#define PN544_GET_DEBUG PN544_IOW(3, unsigned int) -#define PN544_SET_DEBUG PN544_IOW(4, unsigned int) - -/* Timing restrictions (ms) */ -#define PN544_RESETVEN_TIME 30 /* 7 */ -#define PN544_PVDDVEN_TIME 0 -#define PN544_VBATVEN_TIME 0 -#define PN544_GPIO4VEN_TIME 0 -#define PN544_WAKEUP_ACK 5 -#define PN544_WAKEUP_GUARD (PN544_WAKEUP_ACK + 1) -#define PN544_INACTIVITY_TIME 1000 -#define PN544_INTERFRAME_DELAY 200 /* us */ -#define PN544_BAUDRATE_CHANGE 150 /* us */ - -/* Debug bits */ -#define PN544_DEBUG_BUF 0x01 -#define PN544_DEBUG_READ 0x02 -#define PN544_DEBUG_WRITE 0x04 -#define PN544_DEBUG_IRQ 0x08 -#define PN544_DEBUG_CALLS 0x10 -#define PN544_DEBUG_MODE 0x20 - -/* Normal (HCI) mode */ -#define PN544_LLC_HCI_OVERHEAD 3 /* header + crc (to length) */ -#define PN544_LLC_MIN_SIZE (1 + PN544_LLC_HCI_OVERHEAD) /* length + */ -#define PN544_LLC_MAX_DATA (PN544_MSG_MAX_SIZE - 2) -#define PN544_LLC_MAX_HCI_SIZE (PN544_LLC_MAX_DATA - 2) - -struct pn544_llc_packet { - unsigned char length; /* of rest of packet */ - unsigned char header; - unsigned char data[PN544_LLC_MAX_DATA]; /* includes crc-ccitt */ -}; - -/* Firmware upgrade mode */ -#define PN544_FW_HEADER_SIZE 3 -/* max fw transfer is 1024bytes, but I2C limits it to 0xC0 */ -#define PN544_MAX_FW_DATA (PN544_MAX_I2C_TRANSFER - PN544_FW_HEADER_SIZE) - -struct pn544_fw_packet { - unsigned char command; /* status in answer */ - unsigned char length[2]; /* big-endian order (msf) */ - unsigned char data[PN544_MAX_FW_DATA]; -}; - -#ifdef __KERNEL__ -enum { - NFC_GPIO_ENABLE, - NFC_GPIO_FW_RESET, - NFC_GPIO_IRQ -}; - -/* board config */ -struct pn544_nfc_platform_data { - int (*request_resources) (struct i2c_client *client); - void (*free_resources) (void); - void (*enable) (int fw); - int (*test) (void); - void (*disable) (void); - int (*get_gpio)(int type); -}; -#endif /* __KERNEL__ */ - -#endif /* _PN544_H_ */ diff --git a/include/linux/node.h b/include/linux/node.h index 624e53cecc02..2115ad5d6f19 100644 --- a/include/linux/node.h +++ b/include/linux/node.h @@ -27,10 +27,9 @@ struct node { }; struct memory_block; -extern struct node node_devices[]; +extern struct node *node_devices[]; typedef void (*node_registration_func_t)(struct node *); -extern int register_node(struct node *, int, struct node *); extern void unregister_node(struct node *node); #ifdef CONFIG_NUMA extern int register_one_node(int nid); diff --git a/include/linux/nodemask.h b/include/linux/nodemask.h index 7afc36334d52..4e2cbfa640b7 100644 --- a/include/linux/nodemask.h +++ b/include/linux/nodemask.h @@ -380,6 +380,11 @@ enum node_states { #else N_HIGH_MEMORY = N_NORMAL_MEMORY, #endif +#ifdef CONFIG_MOVABLE_NODE + N_MEMORY, /* The node has memory(regular, high, movable) */ +#else + N_MEMORY = N_HIGH_MEMORY, +#endif N_CPU, /* The node has one or more cpus */ NR_NODE_STATES }; diff --git a/include/linux/of.h b/include/linux/of.h index b4e50d56fc74..6cfea9aa401f 100644 --- a/include/linux/of.h +++ b/include/linux/of.h @@ -46,7 +46,7 @@ struct device_node { const char *name; const char *type; phandle phandle; - char *full_name; + const char *full_name; struct property *properties; struct property *deadprops; /* removed properties */ @@ -60,7 +60,7 @@ struct device_node { unsigned long _flags; void *data; #if defined(CONFIG_SPARC) - char *path_component_name; + const char *path_component_name; unsigned int unique_id; struct of_irq_controller *irq_trans; #endif @@ -88,14 +88,14 @@ static inline void of_node_put(struct device_node *node) { } #ifdef CONFIG_OF /* Pointer for first entry in chain of all nodes. */ -extern struct device_node *allnodes; +extern struct device_node *of_allnodes; extern struct device_node *of_chosen; extern struct device_node *of_aliases; extern rwlock_t devtree_lock; static inline bool of_have_populated_dt(void) { - return allnodes != NULL; + return of_allnodes != NULL; } static inline bool of_node_is_root(const struct device_node *node) @@ -179,11 +179,22 @@ extern struct device_node *of_find_compatible_node(struct device_node *from, #define for_each_compatible_node(dn, type, compatible) \ for (dn = of_find_compatible_node(NULL, type, compatible); dn; \ dn = of_find_compatible_node(dn, type, compatible)) -extern struct device_node *of_find_matching_node(struct device_node *from, - const struct of_device_id *matches); +extern struct device_node *of_find_matching_node_and_match( + struct device_node *from, + const struct of_device_id *matches, + const struct of_device_id **match); +static inline struct device_node *of_find_matching_node( + struct device_node *from, + const struct of_device_id *matches) +{ + return of_find_matching_node_and_match(from, matches, NULL); +} #define for_each_matching_node(dn, matches) \ for (dn = of_find_matching_node(NULL, matches); dn; \ dn = of_find_matching_node(dn, matches)) +#define for_each_matching_node_and_match(dn, matches, match) \ + for (dn = of_find_matching_node_and_match(NULL, matches, match); \ + dn; dn = of_find_matching_node_and_match(dn, matches, match)) extern struct device_node *of_find_node_by_path(const char *path); extern struct device_node *of_find_node_by_phandle(phandle handle); extern struct device_node *of_get_parent(const struct device_node *node); @@ -223,6 +234,10 @@ extern struct device_node *of_find_node_with_property( extern struct property *of_find_property(const struct device_node *np, const char *name, int *lenp); +extern int of_property_read_u8_array(const struct device_node *np, + const char *propname, u8 *out_values, size_t sz); +extern int of_property_read_u16_array(const struct device_node *np, + const char *propname, u16 *out_values, size_t sz); extern int of_property_read_u32_array(const struct device_node *np, const char *propname, u32 *out_values, @@ -255,10 +270,10 @@ extern int of_n_size_cells(struct device_node *np); extern const struct of_device_id *of_match_node( const struct of_device_id *matches, const struct device_node *node); extern int of_modalias_node(struct device_node *node, char *modalias, int len); -extern struct device_node *of_parse_phandle(struct device_node *np, +extern struct device_node *of_parse_phandle(const struct device_node *np, const char *phandle_name, int index); -extern int of_parse_phandle_with_args(struct device_node *np, +extern int of_parse_phandle_with_args(const struct device_node *np, const char *list_name, const char *cells_name, int index, struct of_phandle_args *out_args); @@ -364,6 +379,18 @@ static inline struct device_node *of_find_compatible_node( return NULL; } +static inline int of_property_read_u8_array(const struct device_node *np, + const char *propname, u8 *out_values, size_t sz) +{ + return -ENOSYS; +} + +static inline int of_property_read_u16_array(const struct device_node *np, + const char *propname, u16 *out_values, size_t sz) +{ + return -ENOSYS; +} + static inline int of_property_read_u32_array(const struct device_node *np, const char *propname, u32 *out_values, size_t sz) @@ -411,7 +438,7 @@ static inline int of_property_match_string(struct device_node *np, return -ENOSYS; } -static inline struct device_node *of_parse_phandle(struct device_node *np, +static inline struct device_node *of_parse_phandle(const struct device_node *np, const char *phandle_name, int index) { @@ -470,6 +497,20 @@ static inline bool of_property_read_bool(const struct device_node *np, return prop ? true : false; } +static inline int of_property_read_u8(const struct device_node *np, + const char *propname, + u8 *out_value) +{ + return of_property_read_u8_array(np, propname, out_value, 1); +} + +static inline int of_property_read_u16(const struct device_node *np, + const char *propname, + u16 *out_value) +{ + return of_property_read_u16_array(np, propname, out_value, 1); +} + static inline int of_property_read_u32(const struct device_node *np, const char *propname, u32 *out_value) diff --git a/include/linux/of_i2c.h b/include/linux/of_i2c.h index 1cb775f8e663..cfb545cd86b5 100644 --- a/include/linux/of_i2c.h +++ b/include/linux/of_i2c.h @@ -29,6 +29,18 @@ static inline void of_i2c_register_devices(struct i2c_adapter *adap) { return; } + +static inline struct i2c_client *of_find_i2c_device_by_node(struct device_node *node) +{ + return NULL; +} + +/* must call put_device() when done with returned i2c_adapter device */ +static inline struct i2c_adapter *of_find_i2c_adapter_by_node( + struct device_node *node) +{ + return NULL; +} #endif /* CONFIG_OF_I2C */ #endif /* __LINUX_OF_I2C_H */ diff --git a/include/linux/omap-dma.h b/include/linux/omap-dma.h index eb475a8ea25b..7af25a9c9c51 100644 --- a/include/linux/omap-dma.h +++ b/include/linux/omap-dma.h @@ -19,4 +19,370 @@ static inline bool omap_dma_filter_fn(struct dma_chan *c, void *d) } #endif +/* + * Legacy OMAP DMA handling defines and functions + * + * NOTE: Do not use these any longer. + * + * Use the generic dmaengine functions as defined in + * include/linux/dmaengine.h. + * + * Copyright (C) 2003 Nokia Corporation + * Author: Juha Yrjölä <juha.yrjola@nokia.com> + * + */ + +#include <linux/platform_device.h> + +#define INT_DMA_LCD 25 + +#define OMAP1_DMA_TOUT_IRQ (1 << 0) +#define OMAP_DMA_DROP_IRQ (1 << 1) +#define OMAP_DMA_HALF_IRQ (1 << 2) +#define OMAP_DMA_FRAME_IRQ (1 << 3) +#define OMAP_DMA_LAST_IRQ (1 << 4) +#define OMAP_DMA_BLOCK_IRQ (1 << 5) +#define OMAP1_DMA_SYNC_IRQ (1 << 6) +#define OMAP2_DMA_PKT_IRQ (1 << 7) +#define OMAP2_DMA_TRANS_ERR_IRQ (1 << 8) +#define OMAP2_DMA_SECURE_ERR_IRQ (1 << 9) +#define OMAP2_DMA_SUPERVISOR_ERR_IRQ (1 << 10) +#define OMAP2_DMA_MISALIGNED_ERR_IRQ (1 << 11) + +#define OMAP_DMA_CCR_EN (1 << 7) +#define OMAP_DMA_CCR_RD_ACTIVE (1 << 9) +#define OMAP_DMA_CCR_WR_ACTIVE (1 << 10) +#define OMAP_DMA_CCR_SEL_SRC_DST_SYNC (1 << 24) +#define OMAP_DMA_CCR_BUFFERING_DISABLE (1 << 25) + +#define OMAP_DMA_DATA_TYPE_S8 0x00 +#define OMAP_DMA_DATA_TYPE_S16 0x01 +#define OMAP_DMA_DATA_TYPE_S32 0x02 + +#define OMAP_DMA_SYNC_ELEMENT 0x00 +#define OMAP_DMA_SYNC_FRAME 0x01 +#define OMAP_DMA_SYNC_BLOCK 0x02 +#define OMAP_DMA_SYNC_PACKET 0x03 + +#define OMAP_DMA_DST_SYNC_PREFETCH 0x02 +#define OMAP_DMA_SRC_SYNC 0x01 +#define OMAP_DMA_DST_SYNC 0x00 + +#define OMAP_DMA_PORT_EMIFF 0x00 +#define OMAP_DMA_PORT_EMIFS 0x01 +#define OMAP_DMA_PORT_OCP_T1 0x02 +#define OMAP_DMA_PORT_TIPB 0x03 +#define OMAP_DMA_PORT_OCP_T2 0x04 +#define OMAP_DMA_PORT_MPUI 0x05 + +#define OMAP_DMA_AMODE_CONSTANT 0x00 +#define OMAP_DMA_AMODE_POST_INC 0x01 +#define OMAP_DMA_AMODE_SINGLE_IDX 0x02 +#define OMAP_DMA_AMODE_DOUBLE_IDX 0x03 + +#define DMA_DEFAULT_FIFO_DEPTH 0x10 +#define DMA_DEFAULT_ARB_RATE 0x01 +/* Pass THREAD_RESERVE ORed with THREAD_FIFO for tparams */ +#define DMA_THREAD_RESERVE_NORM (0x00 << 12) /* Def */ +#define DMA_THREAD_RESERVE_ONET (0x01 << 12) +#define DMA_THREAD_RESERVE_TWOT (0x02 << 12) +#define DMA_THREAD_RESERVE_THREET (0x03 << 12) +#define DMA_THREAD_FIFO_NONE (0x00 << 14) /* Def */ +#define DMA_THREAD_FIFO_75 (0x01 << 14) +#define DMA_THREAD_FIFO_25 (0x02 << 14) +#define DMA_THREAD_FIFO_50 (0x03 << 14) + +/* DMA4_OCP_SYSCONFIG bits */ +#define DMA_SYSCONFIG_MIDLEMODE_MASK (3 << 12) +#define DMA_SYSCONFIG_CLOCKACTIVITY_MASK (3 << 8) +#define DMA_SYSCONFIG_EMUFREE (1 << 5) +#define DMA_SYSCONFIG_SIDLEMODE_MASK (3 << 3) +#define DMA_SYSCONFIG_SOFTRESET (1 << 2) +#define DMA_SYSCONFIG_AUTOIDLE (1 << 0) + +#define DMA_SYSCONFIG_MIDLEMODE(n) ((n) << 12) +#define DMA_SYSCONFIG_SIDLEMODE(n) ((n) << 3) + +#define DMA_IDLEMODE_SMARTIDLE 0x2 +#define DMA_IDLEMODE_NO_IDLE 0x1 +#define DMA_IDLEMODE_FORCE_IDLE 0x0 + +/* Chaining modes*/ +#ifndef CONFIG_ARCH_OMAP1 +#define OMAP_DMA_STATIC_CHAIN 0x1 +#define OMAP_DMA_DYNAMIC_CHAIN 0x2 +#define OMAP_DMA_CHAIN_ACTIVE 0x1 +#define OMAP_DMA_CHAIN_INACTIVE 0x0 +#endif + +#define DMA_CH_PRIO_HIGH 0x1 +#define DMA_CH_PRIO_LOW 0x0 /* Def */ + +/* Errata handling */ +#define IS_DMA_ERRATA(id) (errata & (id)) +#define SET_DMA_ERRATA(id) (errata |= (id)) + +#define DMA_ERRATA_IFRAME_BUFFERING BIT(0x0) +#define DMA_ERRATA_PARALLEL_CHANNELS BIT(0x1) +#define DMA_ERRATA_i378 BIT(0x2) +#define DMA_ERRATA_i541 BIT(0x3) +#define DMA_ERRATA_i88 BIT(0x4) +#define DMA_ERRATA_3_3 BIT(0x5) +#define DMA_ROMCODE_BUG BIT(0x6) + +/* Attributes for OMAP DMA Contrller */ +#define DMA_LINKED_LCH BIT(0x0) +#define GLOBAL_PRIORITY BIT(0x1) +#define RESERVE_CHANNEL BIT(0x2) +#define IS_CSSA_32 BIT(0x3) +#define IS_CDSA_32 BIT(0x4) +#define IS_RW_PRIORITY BIT(0x5) +#define ENABLE_1510_MODE BIT(0x6) +#define SRC_PORT BIT(0x7) +#define DST_PORT BIT(0x8) +#define SRC_INDEX BIT(0x9) +#define DST_INDEX BIT(0xa) +#define IS_BURST_ONLY4 BIT(0xb) +#define CLEAR_CSR_ON_READ BIT(0xc) +#define IS_WORD_16 BIT(0xd) +#define ENABLE_16XX_MODE BIT(0xe) +#define HS_CHANNELS_RESERVED BIT(0xf) + +/* Defines for DMA Capabilities */ +#define DMA_HAS_TRANSPARENT_CAPS (0x1 << 18) +#define DMA_HAS_CONSTANT_FILL_CAPS (0x1 << 19) +#define DMA_HAS_DESCRIPTOR_CAPS (0x3 << 20) + +enum omap_reg_offsets { + +GCR, GSCR, GRST1, HW_ID, +PCH2_ID, PCH0_ID, PCH1_ID, PCHG_ID, +PCHD_ID, CAPS_0, CAPS_1, CAPS_2, +CAPS_3, CAPS_4, PCH2_SR, PCH0_SR, +PCH1_SR, PCHD_SR, REVISION, IRQSTATUS_L0, +IRQSTATUS_L1, IRQSTATUS_L2, IRQSTATUS_L3, IRQENABLE_L0, +IRQENABLE_L1, IRQENABLE_L2, IRQENABLE_L3, SYSSTATUS, +OCP_SYSCONFIG, + +/* omap1+ specific */ +CPC, CCR2, LCH_CTRL, + +/* Common registers for all omap's */ +CSDP, CCR, CICR, CSR, +CEN, CFN, CSFI, CSEI, +CSAC, CDAC, CDEI, +CDFI, CLNK_CTRL, + +/* Channel specific registers */ +CSSA, CDSA, COLOR, +CCEN, CCFN, + +/* omap3630 and omap4 specific */ +CDP, CNDP, CCDN, + +}; + +enum omap_dma_burst_mode { + OMAP_DMA_DATA_BURST_DIS = 0, + OMAP_DMA_DATA_BURST_4, + OMAP_DMA_DATA_BURST_8, + OMAP_DMA_DATA_BURST_16, +}; + +enum end_type { + OMAP_DMA_LITTLE_ENDIAN = 0, + OMAP_DMA_BIG_ENDIAN +}; + +enum omap_dma_color_mode { + OMAP_DMA_COLOR_DIS = 0, + OMAP_DMA_CONSTANT_FILL, + OMAP_DMA_TRANSPARENT_COPY +}; + +enum omap_dma_write_mode { + OMAP_DMA_WRITE_NON_POSTED = 0, + OMAP_DMA_WRITE_POSTED, + OMAP_DMA_WRITE_LAST_NON_POSTED +}; + +enum omap_dma_channel_mode { + OMAP_DMA_LCH_2D = 0, + OMAP_DMA_LCH_G, + OMAP_DMA_LCH_P, + OMAP_DMA_LCH_PD +}; + +struct omap_dma_channel_params { + int data_type; /* data type 8,16,32 */ + int elem_count; /* number of elements in a frame */ + int frame_count; /* number of frames in a element */ + + int src_port; /* Only on OMAP1 REVISIT: Is this needed? */ + int src_amode; /* constant, post increment, indexed, + double indexed */ + unsigned long src_start; /* source address : physical */ + int src_ei; /* source element index */ + int src_fi; /* source frame index */ + + int dst_port; /* Only on OMAP1 REVISIT: Is this needed? */ + int dst_amode; /* constant, post increment, indexed, + double indexed */ + unsigned long dst_start; /* source address : physical */ + int dst_ei; /* source element index */ + int dst_fi; /* source frame index */ + + int trigger; /* trigger attached if the channel is + synchronized */ + int sync_mode; /* sycn on element, frame , block or packet */ + int src_or_dst_synch; /* source synch(1) or destination synch(0) */ + + int ie; /* interrupt enabled */ + + unsigned char read_prio;/* read priority */ + unsigned char write_prio;/* write priority */ + +#ifndef CONFIG_ARCH_OMAP1 + enum omap_dma_burst_mode burst_mode; /* Burst mode 4/8/16 words */ +#endif +}; + +struct omap_dma_lch { + int next_lch; + int dev_id; + u16 saved_csr; + u16 enabled_irqs; + const char *dev_name; + void (*callback)(int lch, u16 ch_status, void *data); + void *data; + long flags; + /* required for Dynamic chaining */ + int prev_linked_ch; + int next_linked_ch; + int state; + int chain_id; + int status; +}; + +struct omap_dma_dev_attr { + u32 dev_caps; + u16 lch_count; + u16 chan_count; + struct omap_dma_lch *chan; +}; + +/* System DMA platform data structure */ +struct omap_system_dma_plat_info { + struct omap_dma_dev_attr *dma_attr; + u32 errata; + void (*disable_irq_lch)(int lch); + void (*show_dma_caps)(void); + void (*clear_lch_regs)(int lch); + void (*clear_dma)(int lch); + void (*dma_write)(u32 val, int reg, int lch); + u32 (*dma_read)(int reg, int lch); +}; + +#ifdef CONFIG_ARCH_OMAP2PLUS +#define dma_omap2plus() 1 +#else +#define dma_omap2plus() 0 #endif +#define dma_omap1() (!dma_omap2plus()) +#define dma_omap15xx() ((dma_omap1() && (d->dev_caps & ENABLE_1510_MODE))) +#define dma_omap16xx() ((dma_omap1() && (d->dev_caps & ENABLE_16XX_MODE))) + +extern void omap_set_dma_priority(int lch, int dst_port, int priority); +extern int omap_request_dma(int dev_id, const char *dev_name, + void (*callback)(int lch, u16 ch_status, void *data), + void *data, int *dma_ch); +extern void omap_enable_dma_irq(int ch, u16 irq_bits); +extern void omap_disable_dma_irq(int ch, u16 irq_bits); +extern void omap_free_dma(int ch); +extern void omap_start_dma(int lch); +extern void omap_stop_dma(int lch); +extern void omap_set_dma_transfer_params(int lch, int data_type, + int elem_count, int frame_count, + int sync_mode, + int dma_trigger, int src_or_dst_synch); +extern void omap_set_dma_color_mode(int lch, enum omap_dma_color_mode mode, + u32 color); +extern void omap_set_dma_write_mode(int lch, enum omap_dma_write_mode mode); +extern void omap_set_dma_channel_mode(int lch, enum omap_dma_channel_mode mode); + +extern void omap_set_dma_src_params(int lch, int src_port, int src_amode, + unsigned long src_start, + int src_ei, int src_fi); +extern void omap_set_dma_src_index(int lch, int eidx, int fidx); +extern void omap_set_dma_src_data_pack(int lch, int enable); +extern void omap_set_dma_src_burst_mode(int lch, + enum omap_dma_burst_mode burst_mode); + +extern void omap_set_dma_dest_params(int lch, int dest_port, int dest_amode, + unsigned long dest_start, + int dst_ei, int dst_fi); +extern void omap_set_dma_dest_index(int lch, int eidx, int fidx); +extern void omap_set_dma_dest_data_pack(int lch, int enable); +extern void omap_set_dma_dest_burst_mode(int lch, + enum omap_dma_burst_mode burst_mode); + +extern void omap_set_dma_params(int lch, + struct omap_dma_channel_params *params); + +extern void omap_dma_link_lch(int lch_head, int lch_queue); +extern void omap_dma_unlink_lch(int lch_head, int lch_queue); + +extern int omap_set_dma_callback(int lch, + void (*callback)(int lch, u16 ch_status, void *data), + void *data); +extern dma_addr_t omap_get_dma_src_pos(int lch); +extern dma_addr_t omap_get_dma_dst_pos(int lch); +extern void omap_clear_dma(int lch); +extern int omap_get_dma_active_status(int lch); +extern int omap_dma_running(void); +extern void omap_dma_set_global_params(int arb_rate, int max_fifo_depth, + int tparams); +extern int omap_dma_set_prio_lch(int lch, unsigned char read_prio, + unsigned char write_prio); +extern void omap_set_dma_dst_endian_type(int lch, enum end_type etype); +extern void omap_set_dma_src_endian_type(int lch, enum end_type etype); +extern int omap_get_dma_index(int lch, int *ei, int *fi); + +void omap_dma_global_context_save(void); +void omap_dma_global_context_restore(void); + +extern void omap_dma_disable_irq(int lch); + +/* Chaining APIs */ +#ifndef CONFIG_ARCH_OMAP1 +extern int omap_request_dma_chain(int dev_id, const char *dev_name, + void (*callback) (int lch, u16 ch_status, + void *data), + int *chain_id, int no_of_chans, + int chain_mode, + struct omap_dma_channel_params params); +extern int omap_free_dma_chain(int chain_id); +extern int omap_dma_chain_a_transfer(int chain_id, int src_start, + int dest_start, int elem_count, + int frame_count, void *callbk_data); +extern int omap_start_dma_chain_transfers(int chain_id); +extern int omap_stop_dma_chain_transfers(int chain_id); +extern int omap_get_dma_chain_index(int chain_id, int *ei, int *fi); +extern int omap_get_dma_chain_dst_pos(int chain_id); +extern int omap_get_dma_chain_src_pos(int chain_id); + +extern int omap_modify_dma_chain_params(int chain_id, + struct omap_dma_channel_params params); +extern int omap_dma_chain_status(int chain_id); +#endif + +#if defined(CONFIG_ARCH_OMAP1) && defined(CONFIG_FB_OMAP) +#include <mach/lcd_dma.h> +#else +static inline int omap_lcd_dma_running(void) +{ + return 0; +} +#endif + +#endif /* __LINUX_OMAP_DMA_H */ diff --git a/include/linux/omap-iommu.h b/include/linux/omap-iommu.h new file mode 100644 index 000000000000..cac78de09c07 --- /dev/null +++ b/include/linux/omap-iommu.h @@ -0,0 +1,52 @@ +/* + * omap iommu: simple virtual address space management + * + * Copyright (C) 2008-2009 Nokia Corporation + * + * Written by Hiroshi DOYU <Hiroshi.DOYU@nokia.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#ifndef _INTEL_IOMMU_H_ +#define _INTEL_IOMMU_H_ + +struct iovm_struct { + struct omap_iommu *iommu; /* iommu object which this belongs to */ + u32 da_start; /* area definition */ + u32 da_end; + u32 flags; /* IOVMF_: see below */ + struct list_head list; /* linked in ascending order */ + const struct sg_table *sgt; /* keep 'page' <-> 'da' mapping */ + void *va; /* mpu side mapped address */ +}; + +#define MMU_RAM_ENDIAN_SHIFT 9 +#define MMU_RAM_ENDIAN_LITTLE (0 << MMU_RAM_ENDIAN_SHIFT) +#define MMU_RAM_ELSZ_8 (0 << MMU_RAM_ELSZ_SHIFT) +#define IOVMF_ENDIAN_LITTLE MMU_RAM_ENDIAN_LITTLE +#define MMU_RAM_ELSZ_SHIFT 7 +#define IOVMF_ELSZ_8 MMU_RAM_ELSZ_8 + +struct iommu_domain; + +extern struct iovm_struct *omap_find_iovm_area(struct device *dev, u32 da); +extern u32 +omap_iommu_vmap(struct iommu_domain *domain, struct device *dev, u32 da, + const struct sg_table *sgt, u32 flags); +extern struct sg_table *omap_iommu_vunmap(struct iommu_domain *domain, + struct device *dev, u32 da); +extern u32 +omap_iommu_vmalloc(struct iommu_domain *domain, struct device *dev, + u32 da, size_t bytes, u32 flags); +extern void +omap_iommu_vfree(struct iommu_domain *domain, struct device *dev, + const u32 da); +extern void *omap_da_to_va(struct device *dev, u32 da); + +extern void omap_iommu_save_ctx(struct device *dev); +extern void omap_iommu_restore_ctx(struct device *dev); + +#endif diff --git a/include/linux/oom.h b/include/linux/oom.h index fb9826847b89..da60007075b5 100644 --- a/include/linux/oom.h +++ b/include/linux/oom.h @@ -29,8 +29,23 @@ enum oom_scan_t { OOM_SCAN_SELECT, /* always select this thread first */ }; -extern void compare_swap_oom_score_adj(int old_val, int new_val); -extern int test_set_oom_score_adj(int new_val); +/* Thread is the potential origin of an oom condition; kill first on oom */ +#define OOM_FLAG_ORIGIN ((__force oom_flags_t)0x1) + +static inline void set_current_oom_origin(void) +{ + current->signal->oom_flags |= OOM_FLAG_ORIGIN; +} + +static inline void clear_current_oom_origin(void) +{ + current->signal->oom_flags &= ~OOM_FLAG_ORIGIN; +} + +static inline bool oom_task_origin(const struct task_struct *p) +{ + return !!(p->signal->oom_flags & OOM_FLAG_ORIGIN); +} extern unsigned long oom_badness(struct task_struct *p, struct mem_cgroup *memcg, const nodemask_t *nodemask, @@ -49,8 +64,6 @@ extern void check_panic_on_oom(enum oom_constraint constraint, gfp_t gfp_mask, extern enum oom_scan_t oom_scan_process_thread(struct task_struct *task, unsigned long totalpages, const nodemask_t *nodemask, bool force_kill); -extern void mem_cgroup_out_of_memory(struct mem_cgroup *memcg, gfp_t gfp_mask, - int order); extern void out_of_memory(struct zonelist *zonelist, gfp_t gfp_mask, int order, nodemask_t *mask, bool force_kill); diff --git a/include/linux/openvswitch.h b/include/linux/openvswitch.h index eb1efa54fe84..d42e174bd0c8 100644 --- a/include/linux/openvswitch.h +++ b/include/linux/openvswitch.h @@ -243,6 +243,7 @@ enum ovs_key_attr { OVS_KEY_ATTR_ICMPV6, /* struct ovs_key_icmpv6 */ OVS_KEY_ATTR_ARP, /* struct ovs_key_arp */ OVS_KEY_ATTR_ND, /* struct ovs_key_nd */ + OVS_KEY_ATTR_SKB_MARK, /* u32 skb mark */ __OVS_KEY_ATTR_MAX }; diff --git a/include/linux/page-isolation.h b/include/linux/page-isolation.h index 76a9539cfd3f..a92061e08d48 100644 --- a/include/linux/page-isolation.h +++ b/include/linux/page-isolation.h @@ -2,7 +2,8 @@ #define __LINUX_PAGEISOLATION_H -bool has_unmovable_pages(struct zone *zone, struct page *page, int count); +bool has_unmovable_pages(struct zone *zone, struct page *page, int count, + bool skip_hwpoisoned_pages); void set_pageblock_migratetype(struct page *page, int migratetype); int move_freepages_block(struct zone *zone, struct page *page, int migratetype); @@ -21,7 +22,7 @@ int move_freepages(struct zone *zone, */ int start_isolate_page_range(unsigned long start_pfn, unsigned long end_pfn, - unsigned migratetype); + unsigned migratetype, bool skip_hwpoisoned_pages); /* * Changes MIGRATE_ISOLATE to MIGRATE_MOVABLE. @@ -34,12 +35,13 @@ undo_isolate_page_range(unsigned long start_pfn, unsigned long end_pfn, /* * Test all pages in [start_pfn, end_pfn) are isolated or not. */ -int test_pages_isolated(unsigned long start_pfn, unsigned long end_pfn); +int test_pages_isolated(unsigned long start_pfn, unsigned long end_pfn, + bool skip_hwpoisoned_pages); /* * Internal functions. Changes pageblock's migrate type. */ -int set_migratetype_isolate(struct page *page); +int set_migratetype_isolate(struct page *page, bool skip_hwpoisoned_pages); void unset_migratetype_isolate(struct page *page, unsigned migratetype); struct page *alloc_migrate_target(struct page *page, unsigned long private, int **resultp); diff --git a/include/linux/pagemap.h b/include/linux/pagemap.h index e42c762f0dc7..6da609d14c15 100644 --- a/include/linux/pagemap.h +++ b/include/linux/pagemap.h @@ -24,6 +24,7 @@ enum mapping_flags { AS_ENOSPC = __GFP_BITS_SHIFT + 1, /* ENOSPC on async write */ AS_MM_ALL_LOCKS = __GFP_BITS_SHIFT + 2, /* under mm_take_all_locks() */ AS_UNEVICTABLE = __GFP_BITS_SHIFT + 3, /* e.g., ramdisk, SHM_LOCK */ + AS_BALLOON_MAP = __GFP_BITS_SHIFT + 4, /* balloon page special map */ }; static inline void mapping_set_error(struct address_space *mapping, int error) @@ -53,6 +54,21 @@ static inline int mapping_unevictable(struct address_space *mapping) return !!mapping; } +static inline void mapping_set_balloon(struct address_space *mapping) +{ + set_bit(AS_BALLOON_MAP, &mapping->flags); +} + +static inline void mapping_clear_balloon(struct address_space *mapping) +{ + clear_bit(AS_BALLOON_MAP, &mapping->flags); +} + +static inline int mapping_balloon(struct address_space *mapping) +{ + return mapping && test_bit(AS_BALLOON_MAP, &mapping->flags); +} + static inline gfp_t mapping_gfp_mask(struct address_space * mapping) { return (__force gfp_t)mapping->flags & __GFP_BITS_MASK; diff --git a/include/linux/pci.h b/include/linux/pci.h index ee2179546c63..15472d691ee6 100644 --- a/include/linux/pci.h +++ b/include/linux/pci.h @@ -333,6 +333,8 @@ struct pci_dev { }; struct pci_ats *ats; /* Address Translation Service */ #endif + phys_addr_t rom; /* Physical address of ROM if it's not from the BAR */ + size_t romlen; /* Length of ROM if it's not from the BAR */ }; static inline struct pci_dev *pci_physfn(struct pci_dev *dev) @@ -538,6 +540,9 @@ enum pci_ers_result { /* Device driver is fully recovered and operational */ PCI_ERS_RESULT_RECOVERED = (__force pci_ers_result_t) 5, + + /* No AER capabilities registered for the driver */ + PCI_ERS_RESULT_NO_AER_DRIVER = (__force pci_ers_result_t) 6, }; /* PCI bus error event callbacks */ @@ -573,6 +578,7 @@ struct pci_driver { int (*resume_early) (struct pci_dev *dev); int (*resume) (struct pci_dev *dev); /* Device woken up */ void (*shutdown) (struct pci_dev *dev); + int (*sriov_configure) (struct pci_dev *dev, int num_vfs); /* PF pdev */ const struct pci_error_handlers *err_handler; struct device_driver driver; struct pci_dynids dynids; @@ -588,7 +594,7 @@ struct pci_driver { * in a generic manner. */ #define DEFINE_PCI_DEVICE_TABLE(_table) \ - const struct pci_device_id _table[] __devinitconst + const struct pci_device_id _table[] /** * PCI_DEVICE - macro used to describe a specific pci device @@ -604,6 +610,20 @@ struct pci_driver { .subvendor = PCI_ANY_ID, .subdevice = PCI_ANY_ID /** + * PCI_DEVICE_SUB - macro used to describe a specific pci device with subsystem + * @vend: the 16 bit PCI Vendor ID + * @dev: the 16 bit PCI Device ID + * @subvend: the 16 bit PCI Subvendor ID + * @subdev: the 16 bit PCI Subdevice ID + * + * This macro is used to create a struct pci_device_id that matches a + * specific device with subsystem information. + */ +#define PCI_DEVICE_SUB(vend, dev, subvend, subdev) \ + .vendor = (vend), .device = (dev), \ + .subvendor = (subvend), .subdevice = (subdev) + +/** * PCI_DEVICE_CLASS - macro used to describe a specific pci device class * @dev_class: the class, subclass, prog-if triple for this device * @dev_class_mask: the class mask for this device @@ -686,7 +706,7 @@ struct pci_bus *pci_create_root_bus(struct device *parent, int bus, int pci_bus_insert_busn_res(struct pci_bus *b, int bus, int busmax); int pci_bus_update_busn_res_end(struct pci_bus *b, int busmax); void pci_bus_release_busn_res(struct pci_bus *b); -struct pci_bus * __devinit pci_scan_root_bus(struct device *parent, int bus, +struct pci_bus *pci_scan_root_bus(struct device *parent, int bus, struct pci_ops *ops, void *sysdata, struct list_head *resources); struct pci_bus *pci_add_new_bus(struct pci_bus *parent, struct pci_dev *dev, @@ -712,6 +732,8 @@ extern struct pci_dev *pci_dev_get(struct pci_dev *dev); extern void pci_dev_put(struct pci_dev *dev); extern void pci_remove_bus(struct pci_bus *b); extern void pci_stop_and_remove_bus_device(struct pci_dev *dev); +void pci_stop_root_bus(struct pci_bus *bus); +void pci_remove_root_bus(struct pci_bus *bus); void pci_setup_cardbus(struct pci_bus *bus); extern void pci_sort_breadthfirst(void); #define dev_is_pci(d) ((d)->bus == &pci_bus_type) @@ -941,10 +963,8 @@ void set_pcie_hotplug_bridge(struct pci_dev *pdev); /* Functions for PCI Hotplug drivers to use */ int pci_bus_find_capability(struct pci_bus *bus, unsigned int devfn, int cap); -#ifdef CONFIG_HOTPLUG unsigned int pci_rescan_bus_bridge_resize(struct pci_dev *bridge); unsigned int pci_rescan_bus(struct pci_bus *bus); -#endif /* Vital product data routines */ ssize_t pci_read_vpd(struct pci_dev *dev, loff_t pos, size_t count, void *buf); @@ -958,6 +978,7 @@ void pci_bus_size_bridges(struct pci_bus *bus); int pci_claim_resource(struct pci_dev *, int); void pci_assign_unassigned_resources(void); void pci_assign_unassigned_bridge_resources(struct pci_dev *bridge); +void pci_assign_unassigned_bus_resources(struct pci_bus *bus); void pdev_enable_device(struct pci_dev *); int pci_enable_resources(struct pci_dev *, int mask); void pci_fixup_irqs(u8 (*)(struct pci_dev *, u8 *), @@ -1580,7 +1601,7 @@ extern int pci_pci_problems; extern unsigned long pci_cardbus_io_size; extern unsigned long pci_cardbus_mem_size; -extern u8 __devinitdata pci_dfl_cache_line_size; +extern u8 pci_dfl_cache_line_size; extern u8 pci_cache_line_size; extern unsigned long pci_hotplug_io_size; @@ -1592,6 +1613,7 @@ void pcibios_disable_device(struct pci_dev *dev); void pcibios_set_master(struct pci_dev *dev); int pcibios_set_pcie_reset_state(struct pci_dev *dev, enum pcie_reset_state state); +int pcibios_add_device(struct pci_dev *dev); #ifdef CONFIG_PCI_MMCONFIG extern void __init pci_mmcfg_early_init(void); @@ -1601,7 +1623,7 @@ static inline void pci_mmcfg_early_init(void) { } static inline void pci_mmcfg_late_init(void) { } #endif -int pci_ext_cfg_avail(struct pci_dev *dev); +int pci_ext_cfg_avail(void); void __iomem *pci_ioremap_bar(struct pci_dev *pdev, int bar); @@ -1610,6 +1632,8 @@ extern int pci_enable_sriov(struct pci_dev *dev, int nr_virtfn); extern void pci_disable_sriov(struct pci_dev *dev); extern irqreturn_t pci_sriov_migration(struct pci_dev *dev); extern int pci_num_vf(struct pci_dev *dev); +extern int pci_sriov_set_totalvfs(struct pci_dev *dev, u16 numvfs); +extern int pci_sriov_get_totalvfs(struct pci_dev *dev); #else static inline int pci_enable_sriov(struct pci_dev *dev, int nr_virtfn) { @@ -1626,6 +1650,14 @@ static inline int pci_num_vf(struct pci_dev *dev) { return 0; } +static inline int pci_sriov_set_totalvfs(struct pci_dev *dev, u16 numvfs) +{ + return 0; +} +static inline int pci_sriov_get_totalvfs(struct pci_dev *dev) +{ + return 0; +} #endif #if defined(CONFIG_HOTPLUG_PCI) || defined(CONFIG_HOTPLUG_PCI_MODULE) diff --git a/include/linux/pci_ids.h b/include/linux/pci_ids.h index 9d36b829533a..0f8447376ddb 100644 --- a/include/linux/pci_ids.h +++ b/include/linux/pci_ids.h @@ -1985,6 +1985,9 @@ #define PCI_DEVICE_ID_EXAR_XR17C152 0x0152 #define PCI_DEVICE_ID_EXAR_XR17C154 0x0154 #define PCI_DEVICE_ID_EXAR_XR17C158 0x0158 +#define PCI_DEVICE_ID_EXAR_XR17V352 0x0352 +#define PCI_DEVICE_ID_EXAR_XR17V354 0x0354 +#define PCI_DEVICE_ID_EXAR_XR17V358 0x0358 #define PCI_VENDOR_ID_MICROGATE 0x13c0 #define PCI_DEVICE_ID_MICROGATE_USC 0x0010 @@ -2323,6 +2326,8 @@ #define PCI_VENDOR_ID_TOPSPIN 0x1867 +#define PCI_VENDOR_ID_COMMTECH 0x18f7 + #define PCI_VENDOR_ID_SILAN 0x1904 #define PCI_VENDOR_ID_RENESAS 0x1912 diff --git a/include/linux/percpu-rwsem.h b/include/linux/percpu-rwsem.h index 250a4acddb2b..bd1e86071e57 100644 --- a/include/linux/percpu-rwsem.h +++ b/include/linux/percpu-rwsem.h @@ -13,7 +13,7 @@ struct percpu_rw_semaphore { }; #define light_mb() barrier() -#define heavy_mb() synchronize_sched() +#define heavy_mb() synchronize_sched_expedited() static inline void percpu_down_read(struct percpu_rw_semaphore *p) { @@ -51,7 +51,7 @@ static inline void percpu_down_write(struct percpu_rw_semaphore *p) { mutex_lock(&p->mtx); p->locked = true; - synchronize_sched(); /* make sure that all readers exit the rcu_read_lock_sched region */ + synchronize_sched_expedited(); /* make sure that all readers exit the rcu_read_lock_sched region */ while (__percpu_count(p->counters)) msleep(1); heavy_mb(); /* C, between read of p->counter and write to data, paired with B */ diff --git a/include/linux/pinctrl/pinconf-generic.h b/include/linux/pinctrl/pinconf-generic.h index 4f0abb9f1c09..47a1bdd88878 100644 --- a/include/linux/pinctrl/pinconf-generic.h +++ b/include/linux/pinctrl/pinconf-generic.h @@ -46,11 +46,11 @@ * @PIN_CONFIG_DRIVE_OPEN_SOURCE: the pin will be driven with open source * (open emitter). Sending this config will enabale open drain mode, the * argument is ignored. + * @PIN_CONFIG_INPUT_SCHMITT_DISABLE: disable schmitt-trigger mode on the pin. * @PIN_CONFIG_INPUT_SCHMITT: this will configure an input pin to run in * schmitt-trigger mode. If the schmitt-trigger has adjustable hysteresis, * the threshold value is given on a custom format as argument when - * setting pins to this mode. The argument zero turns the schmitt trigger - * off. + * setting pins to this mode. * @PIN_CONFIG_INPUT_DEBOUNCE: this will configure the pin to debounce mode, * which means it will wait for signals to settle when reading inputs. The * argument gives the debounce time on a custom format. Setting the @@ -74,6 +74,7 @@ enum pin_config_param { PIN_CONFIG_DRIVE_PUSH_PULL, PIN_CONFIG_DRIVE_OPEN_DRAIN, PIN_CONFIG_DRIVE_OPEN_SOURCE, + PIN_CONFIG_INPUT_SCHMITT_DISABLE, PIN_CONFIG_INPUT_SCHMITT, PIN_CONFIG_INPUT_DEBOUNCE, PIN_CONFIG_POWER_SOURCE, diff --git a/include/linux/pinctrl/pinctrl.h b/include/linux/pinctrl/pinctrl.h index 7d087f03e91e..04d6700d99af 100644 --- a/include/linux/pinctrl/pinctrl.h +++ b/include/linux/pinctrl/pinctrl.h @@ -134,6 +134,25 @@ extern void pinctrl_add_gpio_range(struct pinctrl_dev *pctldev, extern void pinctrl_add_gpio_ranges(struct pinctrl_dev *pctldev, struct pinctrl_gpio_range *ranges, unsigned nranges); +extern void pinctrl_remove_gpio_range(struct pinctrl_dev *pctldev, + struct pinctrl_gpio_range *range); + +extern struct pinctrl_dev *pinctrl_find_and_add_gpio_range(const char *devname, + struct pinctrl_gpio_range *range); +extern struct pinctrl_gpio_range * +pinctrl_find_gpio_range_from_pin(struct pinctrl_dev *pctldev, + unsigned int pin); + +#ifdef CONFIG_OF +extern struct pinctrl_dev *of_pinctrl_get(struct device_node *np); +#else +static inline +struct pinctrl_dev *of_pinctrl_get(struct device_node *np) +{ + return NULL; +} +#endif /* CONFIG_OF */ + extern const char *pinctrl_dev_get_name(struct pinctrl_dev *pctldev); extern void *pinctrl_dev_get_drvdata(struct pinctrl_dev *pctldev); #else diff --git a/include/linux/platform_data/ad5449.h b/include/linux/platform_data/ad5449.h new file mode 100644 index 000000000000..bd712bd4b94e --- /dev/null +++ b/include/linux/platform_data/ad5449.h @@ -0,0 +1,40 @@ +/* + * AD5415, AD5426, AD5429, AD5432, AD5439, AD5443, AD5449 Digital to Analog + * Converter driver. + * + * Copyright 2012 Analog Devices Inc. + * Author: Lars-Peter Clausen <lars@metafoo.de> + * + * Licensed under the GPL-2. + */ + +#ifndef __LINUX_PLATFORM_DATA_AD5449_H__ +#define __LINUX_PLATFORM_DATA_AD5449_H__ + +/** + * enum ad5449_sdo_mode - AD5449 SDO pin configuration + * @AD5449_SDO_DRIVE_FULL: Drive the SDO pin with full strength. + * @AD5449_SDO_DRIVE_WEAK: Drive the SDO pin with not full strength. + * @AD5449_SDO_OPEN_DRAIN: Operate the SDO pin in open-drain mode. + * @AD5449_SDO_DISABLED: Disable the SDO pin, in this mode it is not possible to + * read back from the device. + */ +enum ad5449_sdo_mode { + AD5449_SDO_DRIVE_FULL = 0x0, + AD5449_SDO_DRIVE_WEAK = 0x1, + AD5449_SDO_OPEN_DRAIN = 0x2, + AD5449_SDO_DISABLED = 0x3, +}; + +/** + * struct ad5449_platform_data - Platform data for the ad5449 DAC driver + * @sdo_mode: SDO pin mode + * @hardware_clear_to_midscale: Whether asserting the hardware CLR pin sets the + * outputs to midscale (true) or to zero scale(false). + */ +struct ad5449_platform_data { + enum ad5449_sdo_mode sdo_mode; + bool hardware_clear_to_midscale; +}; + +#endif diff --git a/include/linux/platform_data/ad7298.h b/include/linux/platform_data/ad7298.h new file mode 100644 index 000000000000..fbf8adf1363a --- /dev/null +++ b/include/linux/platform_data/ad7298.h @@ -0,0 +1,20 @@ +/* + * AD7298 SPI ADC driver + * + * Copyright 2011 Analog Devices Inc. + * + * Licensed under the GPL-2. + */ + +#ifndef __LINUX_PLATFORM_DATA_AD7298_H__ +#define __LINUX_PLATFORM_DATA_AD7298_H__ + +/** + * struct ad7298_platform_data - Platform data for the ad7298 ADC driver + * @ext_ref: Whether to use an external reference voltage. + **/ +struct ad7298_platform_data { + bool ext_ref; +}; + +#endif /* IIO_ADC_AD7298_H_ */ diff --git a/include/linux/platform_data/ad7793.h b/include/linux/platform_data/ad7793.h new file mode 100644 index 000000000000..7ea6751aae6d --- /dev/null +++ b/include/linux/platform_data/ad7793.h @@ -0,0 +1,112 @@ +/* + * AD7792/AD7793 SPI ADC driver + * + * Copyright 2011 Analog Devices Inc. + * + * Licensed under the GPL-2. + */ +#ifndef __LINUX_PLATFORM_DATA_AD7793_H__ +#define __LINUX_PLATFORM_DATA_AD7793_H__ + +/** + * enum ad7793_clock_source - AD7793 clock source selection + * @AD7793_CLK_SRC_INT: Internal 64 kHz clock, not available at the CLK pin. + * @AD7793_CLK_SRC_INT_CO: Internal 64 kHz clock, available at the CLK pin. + * @AD7793_CLK_SRC_EXT: Use external clock. + * @AD7793_CLK_SRC_EXT_DIV2: Use external clock divided by 2. + */ +enum ad7793_clock_source { + AD7793_CLK_SRC_INT, + AD7793_CLK_SRC_INT_CO, + AD7793_CLK_SRC_EXT, + AD7793_CLK_SRC_EXT_DIV2, +}; + +/** + * enum ad7793_bias_voltage - AD7793 bias voltage selection + * @AD7793_BIAS_VOLTAGE_DISABLED: Bias voltage generator disabled + * @AD7793_BIAS_VOLTAGE_AIN1: Bias voltage connected to AIN1(-). + * @AD7793_BIAS_VOLTAGE_AIN2: Bias voltage connected to AIN2(-). + * @AD7793_BIAS_VOLTAGE_AIN3: Bias voltage connected to AIN3(-). + * Only valid for AD7795/AD7796. + */ +enum ad7793_bias_voltage { + AD7793_BIAS_VOLTAGE_DISABLED, + AD7793_BIAS_VOLTAGE_AIN1, + AD7793_BIAS_VOLTAGE_AIN2, + AD7793_BIAS_VOLTAGE_AIN3, +}; + +/** + * enum ad7793_refsel - AD7793 reference voltage selection + * @AD7793_REFSEL_REFIN1: External reference applied between REFIN1(+) + * and REFIN1(-). + * @AD7793_REFSEL_REFIN2: External reference applied between REFIN2(+) and + * and REFIN1(-). Only valid for AD7795/AD7796. + * @AD7793_REFSEL_INTERNAL: Internal 1.17 V reference. + */ +enum ad7793_refsel { + AD7793_REFSEL_REFIN1 = 0, + AD7793_REFSEL_REFIN2 = 1, + AD7793_REFSEL_INTERNAL = 2, +}; + +/** + * enum ad7793_current_source_direction - AD7793 excitation current direction + * @AD7793_IEXEC1_IOUT1_IEXEC2_IOUT2: Current source IEXC1 connected to pin + * IOUT1, current source IEXC2 connected to pin IOUT2. + * @AD7793_IEXEC1_IOUT2_IEXEC2_IOUT1: Current source IEXC2 connected to pin + * IOUT1, current source IEXC1 connected to pin IOUT2. + * @AD7793_IEXEC1_IEXEC2_IOUT1: Both current sources connected to pin IOUT1. + * Only valid when the current sources are set to 10 uA or 210 uA. + * @AD7793_IEXEC1_IEXEC2_IOUT2: Both current sources connected to Pin IOUT2. + * Only valid when the current ources are set to 10 uA or 210 uA. + */ +enum ad7793_current_source_direction { + AD7793_IEXEC1_IOUT1_IEXEC2_IOUT2 = 0, + AD7793_IEXEC1_IOUT2_IEXEC2_IOUT1 = 1, + AD7793_IEXEC1_IEXEC2_IOUT1 = 2, + AD7793_IEXEC1_IEXEC2_IOUT2 = 3, +}; + +/** + * enum ad7793_excitation_current - AD7793 excitation current selection + * @AD7793_IX_DISABLED: Excitation current Disabled. + * @AD7793_IX_10uA: Enable 10 micro-ampere excitation current. + * @AD7793_IX_210uA: Enable 210 micro-ampere excitation current. + * @AD7793_IX_1mA: Enable 1 milli-Ampere excitation current. + */ +enum ad7793_excitation_current { + AD7793_IX_DISABLED = 0, + AD7793_IX_10uA = 1, + AD7793_IX_210uA = 2, + AD7793_IX_1mA = 3, +}; + +/** + * struct ad7793_platform_data - AD7793 platform data + * @clock_src: Clock source selection + * @burnout_current: If set to true the 100nA burnout current is enabled. + * @boost_enable: Enable boost for the bias voltage generator. + * @buffered: If set to true configure the device for buffered input mode. + * @unipolar: If set to true sample in unipolar mode, if set to false sample in + * bipolar mode. + * @refsel: Reference voltage selection + * @bias_voltage: Bias voltage selection + * @exitation_current: Excitation current selection + * @current_source_direction: Excitation current direction selection + */ +struct ad7793_platform_data { + enum ad7793_clock_source clock_src; + bool burnout_current; + bool boost_enable; + bool buffered; + bool unipolar; + + enum ad7793_refsel refsel; + enum ad7793_bias_voltage bias_voltage; + enum ad7793_excitation_current exitation_current; + enum ad7793_current_source_direction current_source_direction; +}; + +#endif /* IIO_ADC_AD7793_H_ */ diff --git a/include/linux/platform_data/ad7887.h b/include/linux/platform_data/ad7887.h new file mode 100644 index 000000000000..1e06eac3174d --- /dev/null +++ b/include/linux/platform_data/ad7887.h @@ -0,0 +1,26 @@ +/* + * AD7887 SPI ADC driver + * + * Copyright 2010 Analog Devices Inc. + * + * Licensed under the GPL-2 or later. + */ +#ifndef IIO_ADC_AD7887_H_ +#define IIO_ADC_AD7887_H_ + +/** + * struct ad7887_platform_data - AD7887 ADC driver platform data + * @en_dual: Whether to use dual channel mode. If set to true AIN1 becomes the + * second input channel, and Vref is internally connected to Vdd. If set to + * false the device is used in single channel mode and AIN1/Vref is used as + * VREF input. + * @use_onchip_ref: Whether to use the onchip reference. If set to true the + * internal 2.5V reference is used. If set to false a external reference is + * used. + */ +struct ad7887_platform_data { + bool en_dual; + bool use_onchip_ref; +}; + +#endif /* IIO_ADC_AD7887_H_ */ diff --git a/include/linux/platform_data/ads7828.h b/include/linux/platform_data/ads7828.h new file mode 100644 index 000000000000..3245f45f9d77 --- /dev/null +++ b/include/linux/platform_data/ads7828.h @@ -0,0 +1,29 @@ +/* + * TI ADS7828 A/D Converter platform data definition + * + * Copyright (c) 2012 Savoir-faire Linux Inc. + * Vivien Didelot <vivien.didelot@savoirfairelinux.com> + * + * For further information, see the Documentation/hwmon/ads7828 file. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#ifndef _PDATA_ADS7828_H +#define _PDATA_ADS7828_H + +/** + * struct ads7828_platform_data - optional ADS7828 connectivity info + * @diff_input: Differential input mode. + * @ext_vref: Use an external voltage reference. + * @vref_mv: Voltage reference value, if external. + */ +struct ads7828_platform_data { + bool diff_input; + bool ext_vref; + unsigned int vref_mv; +}; + +#endif /* _PDATA_ADS7828_H */ diff --git a/include/linux/platform_data/asoc-imx-ssi.h b/include/linux/platform_data/asoc-imx-ssi.h index 63f3c2804239..92c7fd72f636 100644 --- a/include/linux/platform_data/asoc-imx-ssi.h +++ b/include/linux/platform_data/asoc-imx-ssi.h @@ -17,5 +17,7 @@ struct imx_ssi_platform_data { void (*ac97_warm_reset)(struct snd_ac97 *ac97); }; +extern int mxc_set_irq_fiq(unsigned int irq, unsigned int type); + #endif /* __MACH_SSI_H */ diff --git a/include/linux/platform_data/asoc-s3c.h b/include/linux/platform_data/asoc-s3c.h index aa9875f77c40..88272591a895 100644 --- a/include/linux/platform_data/asoc-s3c.h +++ b/include/linux/platform_data/asoc-s3c.h @@ -38,12 +38,6 @@ struct samsung_i2s { #define QUIRK_NEED_RSTCLR (1 << 3) /* Quirks of the I2S controller */ u32 quirks; - - /* - * Array of clock names that can be used to generate I2S signals. - * Also corresponds to clocks of I2SMOD[10] - */ - const char **src_clk; dma_addr_t idma_addr; }; diff --git a/include/linux/platform_data/atmel.h b/include/linux/platform_data/atmel.h index b0f2c56a8ea2..6a293b7fff3b 100644 --- a/include/linux/platform_data/atmel.h +++ b/include/linux/platform_data/atmel.h @@ -8,6 +8,55 @@ #define __ATMEL_H__ #include <linux/mtd/nand.h> +#include <linux/mtd/partitions.h> +#include <linux/device.h> +#include <linux/i2c.h> +#include <linux/leds.h> +#include <linux/spi/spi.h> +#include <linux/usb/atmel_usba_udc.h> +#include <linux/atmel-mci.h> +#include <sound/atmel-ac97c.h> +#include <linux/serial.h> +#include <linux/platform_data/macb.h> + +/* + * at91: 6 USARTs and one DBGU port (SAM9260) + * avr32: 4 + */ +#define ATMEL_MAX_UART 7 + + /* USB Device */ +struct at91_udc_data { + int vbus_pin; /* high == host powering us */ + u8 vbus_active_low; /* vbus polarity */ + u8 vbus_polled; /* Use polling, not interrupt */ + int pullup_pin; /* active == D+ pulled up */ + u8 pullup_active_low; /* true == pullup_pin is active low */ +}; + + /* Compact Flash */ +struct at91_cf_data { + int irq_pin; /* I/O IRQ */ + int det_pin; /* Card detect */ + int vcc_pin; /* power switching */ + int rst_pin; /* card reset */ + u8 chipselect; /* EBI Chip Select number */ + u8 flags; +#define AT91_CF_TRUE_IDE 0x01 +#define AT91_IDE_SWAP_A0_A2 0x02 +}; + + /* USB Host */ +#define AT91_MAX_USBH_PORTS 3 +struct at91_usbh_data { + int vbus_pin[AT91_MAX_USBH_PORTS]; /* port power-control pin */ + int overcurrent_pin[AT91_MAX_USBH_PORTS]; + u8 ports; /* number of ports on root hub */ + u8 overcurrent_supported; + u8 vbus_pin_active_low[AT91_MAX_USBH_PORTS]; + u8 overcurrent_status[AT91_MAX_USBH_PORTS]; + u8 overcurrent_changed[AT91_MAX_USBH_PORTS]; +}; /* NAND / SmartMedia */ struct atmel_nand_data { @@ -24,4 +73,28 @@ struct atmel_nand_data { unsigned int num_parts; }; + /* Serial */ +struct atmel_uart_data { + int num; /* port num */ + short use_dma_tx; /* use transmit DMA? */ + short use_dma_rx; /* use receive DMA? */ + void __iomem *regs; /* virt. base address, if any */ + struct serial_rs485 rs485; /* rs485 settings */ +}; + + /* Touchscreen Controller */ +struct at91_tsadcc_data { + unsigned int adc_clock; + u8 pendet_debounce; + u8 ts_sample_hold_time; +}; + +/* CAN */ +struct at91_can_data { + void (*transceiver_switch)(int on); +}; + +/* FIXME: this needs a better location, but gets stuff building again */ +extern int at91_suspend_entering_slow_clock(void); + #endif /* __ATMEL_H__ */ diff --git a/include/linux/platform_data/clk-integrator.h b/include/linux/platform_data/clk-integrator.h index 83fe9c283bb8..280edac9d0a5 100644 --- a/include/linux/platform_data/clk-integrator.h +++ b/include/linux/platform_data/clk-integrator.h @@ -1 +1,3 @@ void integrator_clk_init(bool is_cp); +void integrator_impd1_clk_init(void __iomem *base, unsigned int id); +void integrator_impd1_clk_exit(unsigned int id); diff --git a/include/linux/platform_data/clocksource-nomadik-mtu.h b/include/linux/platform_data/clocksource-nomadik-mtu.h new file mode 100644 index 000000000000..80088973b734 --- /dev/null +++ b/include/linux/platform_data/clocksource-nomadik-mtu.h @@ -0,0 +1,9 @@ +#ifndef __PLAT_MTU_H +#define __PLAT_MTU_H + +void nmdk_timer_init(void __iomem *base, int irq); +void nmdk_clkevt_reset(void); +void nmdk_clksrc_reset(void); + +#endif /* __PLAT_MTU_H */ + diff --git a/include/linux/platform_data/cpsw.h b/include/linux/platform_data/cpsw.h index c4e23d029498..24368a2e8b87 100644 --- a/include/linux/platform_data/cpsw.h +++ b/include/linux/platform_data/cpsw.h @@ -18,9 +18,7 @@ #include <linux/if_ether.h> struct cpsw_slave_data { - u32 slave_reg_ofs; - u32 sliver_reg_ofs; - const char *phy_id; + char phy_id[MII_BUS_ID_SIZE]; int phy_if; u8 mac_addr[ETH_ALEN]; }; @@ -28,27 +26,14 @@ struct cpsw_slave_data { struct cpsw_platform_data { u32 ss_reg_ofs; /* Subsystem control register offset */ u32 channels; /* number of cpdma channels (symmetric) */ - u32 cpdma_reg_ofs; /* cpdma register offset */ - u32 cpdma_sram_ofs; /* cpdma sram offset */ - u32 slaves; /* number of slave cpgmac ports */ struct cpsw_slave_data *slave_data; - - u32 ale_reg_ofs; /* address lookup engine reg offset */ + u32 cpts_active_slave; /* time stamping slave */ + u32 cpts_clock_mult; /* convert input clock ticks to nanoseconds */ + u32 cpts_clock_shift; /* convert input clock ticks to nanoseconds */ u32 ale_entries; /* ale table size */ - - u32 host_port_reg_ofs; /* cpsw cpdma host port registers */ - u32 host_port_num; /* The port number for the host port */ - - u32 hw_stats_reg_ofs; /* cpsw hardware statistics counters */ - - u32 bd_ram_ofs; /* embedded buffer descriptor RAM offset*/ u32 bd_ram_size; /*buffer descriptor ram size */ - u32 hw_ram_addr; /*if the HW address for BD RAM is different */ - bool no_bd_ram; /* no embedded BD ram*/ - u32 rx_descs; /* Number of Rx Descriptios */ - u32 mac_control; /* Mac control register */ }; diff --git a/include/linux/platform_data/crypto-ux500.h b/include/linux/platform_data/crypto-ux500.h index 5b2d0817e26a..94df96d9a336 100644 --- a/include/linux/platform_data/crypto-ux500.h +++ b/include/linux/platform_data/crypto-ux500.h @@ -7,7 +7,7 @@ #ifndef _CRYPTO_UX500_H #define _CRYPTO_UX500_H #include <linux/dmaengine.h> -#include <plat/ste_dma40.h> +#include <linux/platform_data/dma-ste-dma40.h> struct hash_platform_data { void *mem_to_engine; diff --git a/include/linux/platform_data/davinci_asp.h b/include/linux/platform_data/davinci_asp.h index d0c5825876f8..8db5ae03b6e3 100644 --- a/include/linux/platform_data/davinci_asp.h +++ b/include/linux/platform_data/davinci_asp.h @@ -16,12 +16,13 @@ #ifndef __DAVINCI_ASP_H #define __DAVINCI_ASP_H +#include <linux/genalloc.h> + struct snd_platform_data { u32 tx_dma_offset; u32 rx_dma_offset; int asp_chan_q; /* event queue number for ASP channel */ int ram_chan_q; /* event queue number for RAM channel */ - unsigned int codec_fmt; /* * Allowing this is more efficient and eliminates left and right swaps * caused by underruns, but will swap the left and right channels @@ -30,6 +31,7 @@ struct snd_platform_data { unsigned enable_channel_combine:1; unsigned sram_size_playback; unsigned sram_size_capture; + struct gen_pool *sram_pool; /* * If McBSP peripheral gets the clock from an external pin, diff --git a/include/linux/platform_data/db8500_thermal.h b/include/linux/platform_data/db8500_thermal.h new file mode 100644 index 000000000000..3bf60902e902 --- /dev/null +++ b/include/linux/platform_data/db8500_thermal.h @@ -0,0 +1,38 @@ +/* + * db8500_thermal.h - DB8500 Thermal Management Implementation + * + * Copyright (C) 2012 ST-Ericsson + * Copyright (C) 2012 Linaro Ltd. + * + * Author: Hongbo Zhang <hongbo.zhang@linaro.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#ifndef _DB8500_THERMAL_H_ +#define _DB8500_THERMAL_H_ + +#include <linux/thermal.h> + +#define COOLING_DEV_MAX 8 + +struct db8500_trip_point { + unsigned long temp; + enum thermal_trip_type type; + char cdev_name[COOLING_DEV_MAX][THERMAL_NAME_LENGTH]; +}; + +struct db8500_thsens_platform_data { + struct db8500_trip_point trip_points[THERMAL_MAX_TRIPS]; + int num_trips; +}; + +#endif /* _DB8500_THERMAL_H_ */ diff --git a/include/linux/platform_data/dma-imx.h b/include/linux/platform_data/dma-imx.h index 1b9080385b46..f6d30cc1cb77 100644 --- a/include/linux/platform_data/dma-imx.h +++ b/include/linux/platform_data/dma-imx.h @@ -61,7 +61,9 @@ static inline int imx_dma_is_ipu(struct dma_chan *chan) static inline int imx_dma_is_general_purpose(struct dma_chan *chan) { return strstr(dev_name(chan->device->dev), "sdma") || - !strcmp(dev_name(chan->device->dev), "imx-dma"); + !strcmp(dev_name(chan->device->dev), "imx1-dma") || + !strcmp(dev_name(chan->device->dev), "imx21-dma") || + !strcmp(dev_name(chan->device->dev), "imx27-dma"); } #endif diff --git a/include/linux/platform_data/dma-mv_xor.h b/include/linux/platform_data/dma-mv_xor.h index 2ba1f7d76eef..8ec18f64e396 100644 --- a/include/linux/platform_data/dma-mv_xor.h +++ b/include/linux/platform_data/dma-mv_xor.h @@ -10,15 +10,14 @@ #include <linux/dmaengine.h> #include <linux/mbus.h> -#define MV_XOR_SHARED_NAME "mv_xor_shared" -#define MV_XOR_NAME "mv_xor" +#define MV_XOR_NAME "mv_xor" -struct mv_xor_platform_data { - struct platform_device *shared; - int hw_id; +struct mv_xor_channel_data { dma_cap_mask_t cap_mask; - size_t pool_size; }; +struct mv_xor_platform_data { + struct mv_xor_channel_data *channels; +}; #endif diff --git a/include/linux/platform_data/dma-ste-dma40.h b/include/linux/platform_data/dma-ste-dma40.h new file mode 100644 index 000000000000..9ff93b065686 --- /dev/null +++ b/include/linux/platform_data/dma-ste-dma40.h @@ -0,0 +1,223 @@ +/* + * Copyright (C) ST-Ericsson SA 2007-2010 + * Author: Per Forlin <per.forlin@stericsson.com> for ST-Ericsson + * Author: Jonas Aaberg <jonas.aberg@stericsson.com> for ST-Ericsson + * License terms: GNU General Public License (GPL) version 2 + */ + + +#ifndef STE_DMA40_H +#define STE_DMA40_H + +#include <linux/dmaengine.h> +#include <linux/scatterlist.h> +#include <linux/workqueue.h> +#include <linux/interrupt.h> + +/* + * Maxium size for a single dma descriptor + * Size is limited to 16 bits. + * Size is in the units of addr-widths (1,2,4,8 bytes) + * Larger transfers will be split up to multiple linked desc + */ +#define STEDMA40_MAX_SEG_SIZE 0xFFFF + +/* dev types for memcpy */ +#define STEDMA40_DEV_DST_MEMORY (-1) +#define STEDMA40_DEV_SRC_MEMORY (-1) + +enum stedma40_mode { + STEDMA40_MODE_LOGICAL = 0, + STEDMA40_MODE_PHYSICAL, + STEDMA40_MODE_OPERATION, +}; + +enum stedma40_mode_opt { + STEDMA40_PCHAN_BASIC_MODE = 0, + STEDMA40_LCHAN_SRC_LOG_DST_LOG = 0, + STEDMA40_PCHAN_MODULO_MODE, + STEDMA40_PCHAN_DOUBLE_DST_MODE, + STEDMA40_LCHAN_SRC_PHY_DST_LOG, + STEDMA40_LCHAN_SRC_LOG_DST_PHY, +}; + +#define STEDMA40_ESIZE_8_BIT 0x0 +#define STEDMA40_ESIZE_16_BIT 0x1 +#define STEDMA40_ESIZE_32_BIT 0x2 +#define STEDMA40_ESIZE_64_BIT 0x3 + +/* The value 4 indicates that PEN-reg shall be set to 0 */ +#define STEDMA40_PSIZE_PHY_1 0x4 +#define STEDMA40_PSIZE_PHY_2 0x0 +#define STEDMA40_PSIZE_PHY_4 0x1 +#define STEDMA40_PSIZE_PHY_8 0x2 +#define STEDMA40_PSIZE_PHY_16 0x3 + +/* + * The number of elements differ in logical and + * physical mode + */ +#define STEDMA40_PSIZE_LOG_1 STEDMA40_PSIZE_PHY_2 +#define STEDMA40_PSIZE_LOG_4 STEDMA40_PSIZE_PHY_4 +#define STEDMA40_PSIZE_LOG_8 STEDMA40_PSIZE_PHY_8 +#define STEDMA40_PSIZE_LOG_16 STEDMA40_PSIZE_PHY_16 + +/* Maximum number of possible physical channels */ +#define STEDMA40_MAX_PHYS 32 + +enum stedma40_flow_ctrl { + STEDMA40_NO_FLOW_CTRL, + STEDMA40_FLOW_CTRL, +}; + +enum stedma40_periph_data_width { + STEDMA40_BYTE_WIDTH = STEDMA40_ESIZE_8_BIT, + STEDMA40_HALFWORD_WIDTH = STEDMA40_ESIZE_16_BIT, + STEDMA40_WORD_WIDTH = STEDMA40_ESIZE_32_BIT, + STEDMA40_DOUBLEWORD_WIDTH = STEDMA40_ESIZE_64_BIT +}; + +enum stedma40_xfer_dir { + STEDMA40_MEM_TO_MEM = 1, + STEDMA40_MEM_TO_PERIPH, + STEDMA40_PERIPH_TO_MEM, + STEDMA40_PERIPH_TO_PERIPH +}; + + +/** + * struct stedma40_chan_cfg - dst/src channel configuration + * + * @big_endian: true if the src/dst should be read as big endian + * @data_width: Data width of the src/dst hardware + * @p_size: Burst size + * @flow_ctrl: Flow control on/off. + */ +struct stedma40_half_channel_info { + bool big_endian; + enum stedma40_periph_data_width data_width; + int psize; + enum stedma40_flow_ctrl flow_ctrl; +}; + +/** + * struct stedma40_chan_cfg - Structure to be filled by client drivers. + * + * @dir: MEM 2 MEM, PERIPH 2 MEM , MEM 2 PERIPH, PERIPH 2 PERIPH + * @high_priority: true if high-priority + * @realtime: true if realtime mode is to be enabled. Only available on DMA40 + * version 3+, i.e DB8500v2+ + * @mode: channel mode: physical, logical, or operation + * @mode_opt: options for the chosen channel mode + * @src_dev_type: Src device type + * @dst_dev_type: Dst device type + * @src_info: Parameters for dst half channel + * @dst_info: Parameters for dst half channel + * @use_fixed_channel: if true, use physical channel specified by phy_channel + * @phy_channel: physical channel to use, only if use_fixed_channel is true + * + * This structure has to be filled by the client drivers. + * It is recommended to do all dma configurations for clients in the machine. + * + */ +struct stedma40_chan_cfg { + enum stedma40_xfer_dir dir; + bool high_priority; + bool realtime; + enum stedma40_mode mode; + enum stedma40_mode_opt mode_opt; + int src_dev_type; + int dst_dev_type; + struct stedma40_half_channel_info src_info; + struct stedma40_half_channel_info dst_info; + + bool use_fixed_channel; + int phy_channel; +}; + +/** + * struct stedma40_platform_data - Configuration struct for the dma device. + * + * @dev_len: length of dev_tx and dev_rx + * @dev_tx: mapping between destination event line and io address + * @dev_rx: mapping between source event line and io address + * @memcpy: list of memcpy event lines + * @memcpy_len: length of memcpy + * @memcpy_conf_phy: default configuration of physical channel memcpy + * @memcpy_conf_log: default configuration of logical channel memcpy + * @disabled_channels: A vector, ending with -1, that marks physical channels + * that are for different reasons not available for the driver. + */ +struct stedma40_platform_data { + u32 dev_len; + const dma_addr_t *dev_tx; + const dma_addr_t *dev_rx; + int *memcpy; + u32 memcpy_len; + struct stedma40_chan_cfg *memcpy_conf_phy; + struct stedma40_chan_cfg *memcpy_conf_log; + int disabled_channels[STEDMA40_MAX_PHYS]; + bool use_esram_lcla; +}; + +#ifdef CONFIG_STE_DMA40 + +/** + * stedma40_filter() - Provides stedma40_chan_cfg to the + * ste_dma40 dma driver via the dmaengine framework. + * does some checking of what's provided. + * + * Never directly called by client. It used by dmaengine. + * @chan: dmaengine handle. + * @data: Must be of type: struct stedma40_chan_cfg and is + * the configuration of the framework. + * + * + */ + +bool stedma40_filter(struct dma_chan *chan, void *data); + +/** + * stedma40_slave_mem() - Transfers a raw data buffer to or from a slave + * (=device) + * + * @chan: dmaengine handle + * @addr: source or destination physicall address. + * @size: bytes to transfer + * @direction: direction of transfer + * @flags: is actually enum dma_ctrl_flags. See dmaengine.h + */ + +static inline struct +dma_async_tx_descriptor *stedma40_slave_mem(struct dma_chan *chan, + dma_addr_t addr, + unsigned int size, + enum dma_transfer_direction direction, + unsigned long flags) +{ + struct scatterlist sg; + sg_init_table(&sg, 1); + sg.dma_address = addr; + sg.length = size; + + return dmaengine_prep_slave_sg(chan, &sg, 1, direction, flags); +} + +#else +static inline bool stedma40_filter(struct dma_chan *chan, void *data) +{ + return false; +} + +static inline struct +dma_async_tx_descriptor *stedma40_slave_mem(struct dma_chan *chan, + dma_addr_t addr, + unsigned int size, + enum dma_transfer_direction direction, + unsigned long flags) +{ + return NULL; +} +#endif + +#endif diff --git a/include/linux/platform_data/dmtimer-omap.h b/include/linux/platform_data/dmtimer-omap.h new file mode 100644 index 000000000000..a19b78d826e9 --- /dev/null +++ b/include/linux/platform_data/dmtimer-omap.h @@ -0,0 +1,31 @@ +/* + * DMTIMER platform data for TI OMAP platforms + * + * Copyright (C) 2012 Texas Instruments + * Author: Jon Hunter <jon-hunter@ti.com> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published by + * the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + * + * You should have received a copy of the GNU General Public License along with + * this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#ifndef __PLATFORM_DATA_DMTIMER_OMAP_H__ +#define __PLATFORM_DATA_DMTIMER_OMAP_H__ + +struct dmtimer_platform_data { + /* set_timer_src - Only used for OMAP1 devices */ + int (*set_timer_src)(struct platform_device *pdev, int source); + u32 timer_capability; + u32 timer_errata; + int (*get_context_loss_count)(struct device *); +}; + +#endif /* __PLATFORM_DATA_DMTIMER_OMAP_H__ */ diff --git a/include/linux/platform_data/gpio-omap.h b/include/linux/platform_data/gpio-omap.h index e8741c2678d5..5d50b25a73d7 100644 --- a/include/linux/platform_data/gpio-omap.h +++ b/include/linux/platform_data/gpio-omap.h @@ -26,7 +26,6 @@ #include <linux/io.h> #include <linux/platform_device.h> -#include <mach/irqs.h> #define OMAP1_MPUIO_BASE 0xfffb5000 diff --git a/include/linux/platform_data/gpio-ts5500.h b/include/linux/platform_data/gpio-ts5500.h new file mode 100644 index 000000000000..b10d11c9bb49 --- /dev/null +++ b/include/linux/platform_data/gpio-ts5500.h @@ -0,0 +1,27 @@ +/* + * GPIO (DIO) header for Technologic Systems TS-5500 + * + * Copyright (c) 2012 Savoir-faire Linux Inc. + * Vivien Didelot <vivien.didelot@savoirfairelinux.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#ifndef _PDATA_GPIO_TS5500_H +#define _PDATA_GPIO_TS5500_H + +/** + * struct ts5500_dio_platform_data - TS-5500 pin block configuration + * @base: The GPIO base number to use. + * @strap: The only pin connected to an interrupt in a block is input-only. + * If you need a bidirectional line which can trigger an IRQ, you + * may strap it with an in/out pin. This flag indicates this case. + */ +struct ts5500_dio_platform_data { + int base; + bool strap; +}; + +#endif /* _PDATA_GPIO_TS5500_H */ diff --git a/include/linux/platform_data/iommu-omap.h b/include/linux/platform_data/iommu-omap.h new file mode 100644 index 000000000000..c677b9f2fefa --- /dev/null +++ b/include/linux/platform_data/iommu-omap.h @@ -0,0 +1,49 @@ +/* + * omap iommu: main structures + * + * Copyright (C) 2008-2009 Nokia Corporation + * + * Written by Hiroshi DOYU <Hiroshi.DOYU@nokia.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#define MMU_REG_SIZE 256 + +/** + * struct iommu_arch_data - omap iommu private data + * @name: name of the iommu device + * @iommu_dev: handle of the iommu device + * + * This is an omap iommu private data object, which binds an iommu user + * to its iommu device. This object should be placed at the iommu user's + * dev_archdata so generic IOMMU API can be used without having to + * utilize omap-specific plumbing anymore. + */ +struct omap_iommu_arch_data { + const char *name; + struct omap_iommu *iommu_dev; +}; + +/** + * struct omap_mmu_dev_attr - OMAP mmu device attributes for omap_hwmod + * @da_start: device address where the va space starts. + * @da_end: device address where the va space ends. + * @nr_tlb_entries: number of entries supported by the translation + * look-aside buffer (TLB). + */ +struct omap_mmu_dev_attr { + u32 da_start; + u32 da_end; + int nr_tlb_entries; +}; + +struct iommu_platform_data { + const char *name; + const char *clk_name; + const int nr_tlb_entries; + u32 da_start; + u32 da_end; +}; diff --git a/include/linux/platform_data/leds-omap.h b/include/linux/platform_data/leds-omap.h new file mode 100644 index 000000000000..56c9b2a0ada5 --- /dev/null +++ b/include/linux/platform_data/leds-omap.h @@ -0,0 +1,22 @@ +/* + * Copyright (C) 2006 Samsung Electronics + * Kyungmin Park <kyungmin.park@samsung.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +#ifndef ASMARM_ARCH_LED_H +#define ASMARM_ARCH_LED_H + +struct omap_led_config { + struct led_classdev cdev; + s16 gpio; +}; + +struct omap_led_platform_data { + s16 nr_leds; + struct omap_led_config *leds; +}; + +#endif diff --git a/include/linux/platform_data/macb.h b/include/linux/platform_data/macb.h index b081c7245ec8..044a124bfbbc 100644 --- a/include/linux/platform_data/macb.h +++ b/include/linux/platform_data/macb.h @@ -12,6 +12,7 @@ struct macb_platform_data { u32 phy_mask; int phy_irq_pin; /* PHY IRQ */ u8 is_rmii; /* using RMII interface? */ + u8 rev_eth_addr; /* reverse Ethernet address byte order */ }; #endif /* __MACB_PDATA_H__ */ diff --git a/include/linux/platform_data/mmc-omap.h b/include/linux/platform_data/mmc-omap.h new file mode 100644 index 000000000000..2bf1b30cb5dc --- /dev/null +++ b/include/linux/platform_data/mmc-omap.h @@ -0,0 +1,151 @@ +/* + * MMC definitions for OMAP2 + * + * Copyright (C) 2006 Nokia Corporation + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#define OMAP_MMC_MAX_SLOTS 2 + +/* + * struct omap_mmc_dev_attr.flags possibilities + * + * OMAP_HSMMC_SUPPORTS_DUAL_VOLT: Some HSMMC controller instances can + * operate with either 1.8Vdc or 3.0Vdc card voltages; this flag + * should be set if this is the case. See for example Section 22.5.3 + * "MMC/SD/SDIO1 Bus Voltage Selection" of the OMAP34xx Multimedia + * Device Silicon Revision 3.1.x Revision ZR (July 2011) (SWPU223R). + * + * OMAP_HSMMC_BROKEN_MULTIBLOCK_READ: Multiple-block read transfers + * don't work correctly on some MMC controller instances on some + * OMAP3 SoCs; this flag should be set if this is the case. See + * for example Advisory 2.1.1.128 "MMC: Multiple Block Read + * Operation Issue" in _OMAP3530/3525/3515/3503 Silicon Errata_ + * Revision F (October 2010) (SPRZ278F). + */ +#define OMAP_HSMMC_SUPPORTS_DUAL_VOLT BIT(0) +#define OMAP_HSMMC_BROKEN_MULTIBLOCK_READ BIT(1) + +struct mmc_card; + +struct omap_mmc_dev_attr { + u8 flags; +}; + +struct omap_mmc_platform_data { + /* back-link to device */ + struct device *dev; + + /* number of slots per controller */ + unsigned nr_slots:2; + + /* set if your board has components or wiring that limits the + * maximum frequency on the MMC bus */ + unsigned int max_freq; + + /* switch the bus to a new slot */ + int (*switch_slot)(struct device *dev, int slot); + /* initialize board-specific MMC functionality, can be NULL if + * not supported */ + int (*init)(struct device *dev); + void (*cleanup)(struct device *dev); + void (*shutdown)(struct device *dev); + + /* To handle board related suspend/resume functionality for MMC */ + int (*suspend)(struct device *dev, int slot); + int (*resume)(struct device *dev, int slot); + + /* Return context loss count due to PM states changing */ + int (*get_context_loss_count)(struct device *dev); + + /* Integrating attributes from the omap_hwmod layer */ + u8 controller_flags; + + /* Register offset deviation */ + u16 reg_offset; + + struct omap_mmc_slot_data { + + /* + * 4/8 wires and any additional host capabilities + * need to OR'd all capabilities (ref. linux/mmc/host.h) + */ + u8 wires; /* Used for the MMC driver on omap1 and 2420 */ + u32 caps; /* Used for the MMC driver on 2430 and later */ + u32 pm_caps; /* PM capabilities of the mmc */ + + /* + * nomux means "standard" muxing is wrong on this board, and + * that board-specific code handled it before common init logic. + */ + unsigned nomux:1; + + /* switch pin can be for card detect (default) or card cover */ + unsigned cover:1; + + /* use the internal clock */ + unsigned internal_clock:1; + + /* nonremovable e.g. eMMC */ + unsigned nonremovable:1; + + /* Try to sleep or power off when possible */ + unsigned power_saving:1; + + /* If using power_saving and the MMC power is not to go off */ + unsigned no_off:1; + + /* eMMC does not handle power off when not in sleep state */ + unsigned no_regulator_off_init:1; + + /* Regulator off remapped to sleep */ + unsigned vcc_aux_disable_is_sleep:1; + + /* we can put the features above into this variable */ +#define HSMMC_HAS_PBIAS (1 << 0) +#define HSMMC_HAS_UPDATED_RESET (1 << 1) +#define HSMMC_HAS_HSPE_SUPPORT (1 << 2) +#define MMC_OMAP7XX (1 << 3) +#define MMC_OMAP15XX (1 << 4) +#define MMC_OMAP16XX (1 << 5) + unsigned features; + + int switch_pin; /* gpio (card detect) */ + int gpio_wp; /* gpio (write protect) */ + + int (*set_bus_mode)(struct device *dev, int slot, int bus_mode); + int (*set_power)(struct device *dev, int slot, + int power_on, int vdd); + int (*get_ro)(struct device *dev, int slot); + void (*remux)(struct device *dev, int slot, int power_on); + /* Call back before enabling / disabling regulators */ + void (*before_set_reg)(struct device *dev, int slot, + int power_on, int vdd); + /* Call back after enabling / disabling regulators */ + void (*after_set_reg)(struct device *dev, int slot, + int power_on, int vdd); + /* if we have special card, init it using this callback */ + void (*init_card)(struct mmc_card *card); + + /* return MMC cover switch state, can be NULL if not supported. + * + * possible return values: + * 0 - closed + * 1 - open + */ + int (*get_cover_state)(struct device *dev, int slot); + + const char *name; + u32 ocr_mask; + + /* Card detection IRQs */ + int card_detect_irq; + int (*card_detect)(struct device *dev, int slot); + + unsigned int ban_openended:1; + + } slots[OMAP_MMC_MAX_SLOTS]; +}; diff --git a/include/linux/platform_data/mtd-nand-omap2.h b/include/linux/platform_data/mtd-nand-omap2.h index 1a68c1e5fe53..24d32ca34bef 100644 --- a/include/linux/platform_data/mtd-nand-omap2.h +++ b/include/linux/platform_data/mtd-nand-omap2.h @@ -8,9 +8,13 @@ * published by the Free Software Foundation. */ -#include <plat/gpmc.h> +#ifndef _MTD_NAND_OMAP2_H +#define _MTD_NAND_OMAP2_H + #include <linux/mtd/partitions.h> +#define GPMC_BCH_NUM_REMAINDER 8 + enum nand_io { NAND_OMAP_PREFETCH_POLLED = 0, /* prefetch polled mode, default */ NAND_OMAP_POLLED, /* polled mode, without prefetch */ @@ -18,10 +22,38 @@ enum nand_io { NAND_OMAP_PREFETCH_IRQ /* prefetch enabled irq mode */ }; +enum omap_ecc { + /* 1-bit ecc: stored at end of spare area */ + OMAP_ECC_HAMMING_CODE_DEFAULT = 0, /* Default, s/w method */ + OMAP_ECC_HAMMING_CODE_HW, /* gpmc to detect the error */ + /* 1-bit ecc: stored at beginning of spare area as romcode */ + OMAP_ECC_HAMMING_CODE_HW_ROMCODE, /* gpmc method & romcode layout */ + OMAP_ECC_BCH4_CODE_HW, /* 4-bit BCH ecc code */ + OMAP_ECC_BCH8_CODE_HW, /* 8-bit BCH ecc code */ +}; + +struct gpmc_nand_regs { + void __iomem *gpmc_status; + void __iomem *gpmc_nand_command; + void __iomem *gpmc_nand_address; + void __iomem *gpmc_nand_data; + void __iomem *gpmc_prefetch_config1; + void __iomem *gpmc_prefetch_config2; + void __iomem *gpmc_prefetch_control; + void __iomem *gpmc_prefetch_status; + void __iomem *gpmc_ecc_config; + void __iomem *gpmc_ecc_control; + void __iomem *gpmc_ecc_size_config; + void __iomem *gpmc_ecc1_result; + void __iomem *gpmc_bch_result0[GPMC_BCH_NUM_REMAINDER]; + void __iomem *gpmc_bch_result1[GPMC_BCH_NUM_REMAINDER]; + void __iomem *gpmc_bch_result2[GPMC_BCH_NUM_REMAINDER]; + void __iomem *gpmc_bch_result3[GPMC_BCH_NUM_REMAINDER]; +}; + struct omap_nand_platform_data { int cs; struct mtd_partition *parts; - struct gpmc_timings *gpmc_t; int nr_parts; bool dev_ready; enum nand_io xfer_type; @@ -30,14 +62,4 @@ struct omap_nand_platform_data { struct gpmc_nand_regs reg; }; -/* minimum size for IO mapping */ -#define NAND_IO_SIZE 4 - -#if defined(CONFIG_MTD_NAND_OMAP2) || defined(CONFIG_MTD_NAND_OMAP2_MODULE) -extern int gpmc_nand_init(struct omap_nand_platform_data *d); -#else -static inline int gpmc_nand_init(struct omap_nand_platform_data *d) -{ - return 0; -} #endif diff --git a/include/linux/platform_data/mtd-onenand-omap2.h b/include/linux/platform_data/mtd-onenand-omap2.h index 2858667d2e4f..685af7e8b120 100644 --- a/include/linux/platform_data/mtd-onenand-omap2.h +++ b/include/linux/platform_data/mtd-onenand-omap2.h @@ -9,17 +9,15 @@ * published by the Free Software Foundation. */ +#ifndef __MTD_ONENAND_OMAP2_H +#define __MTD_ONENAND_OMAP2_H + #include <linux/mtd/mtd.h> #include <linux/mtd/partitions.h> #define ONENAND_SYNC_READ (1 << 0) #define ONENAND_SYNC_READWRITE (1 << 1) - -struct onenand_freq_info { - u16 maf_id; - u16 dev_id; - u16 ver_id; -}; +#define ONENAND_IN_OMAP34XX (1 << 2) struct omap_onenand_platform_data { int cs; @@ -27,27 +25,9 @@ struct omap_onenand_platform_data { struct mtd_partition *parts; int nr_parts; int (*onenand_setup)(void __iomem *, int *freq_ptr); - int (*get_freq)(const struct onenand_freq_info *freq_info, - bool *clk_dep); int dma_channel; u8 flags; u8 regulator_can_sleep; u8 skip_initial_unlocking; }; - -#define ONENAND_MAX_PARTITIONS 8 - -#if defined(CONFIG_MTD_ONENAND_OMAP2) || \ - defined(CONFIG_MTD_ONENAND_OMAP2_MODULE) - -extern void gpmc_onenand_init(struct omap_onenand_platform_data *d); - -#else - -#define board_onenand_data NULL - -static inline void gpmc_onenand_init(struct omap_onenand_platform_data *d) -{ -} - #endif diff --git a/include/linux/platform_data/omap-twl4030.h b/include/linux/platform_data/omap-twl4030.h index c7bef788daab..ee60ef79d792 100644 --- a/include/linux/platform_data/omap-twl4030.h +++ b/include/linux/platform_data/omap-twl4030.h @@ -25,8 +25,34 @@ #ifndef _OMAP_TWL4030_H_ #define _OMAP_TWL4030_H_ +/* To select if only one channel is connected in a stereo port */ +#define OMAP_TWL4030_LEFT (1 << 0) +#define OMAP_TWL4030_RIGHT (1 << 1) + struct omap_tw4030_pdata { const char *card_name; + /* Voice port is connected to McBSP3 */ + bool voice_connected; + + /* The driver will parse the connection flags if this flag is set */ + bool custom_routing; + /* Flags to indicate connected audio ports. */ + u8 has_hs; + u8 has_hf; + u8 has_predriv; + u8 has_carkit; + bool has_ear; + + bool has_mainmic; + bool has_submic; + bool has_hsmic; + bool has_carkitmic; + bool has_digimic0; + bool has_digimic1; + u8 has_linein; + + /* Jack detect GPIO or <= 0 if it is not implemented */ + int jack_detect; }; #endif /* _OMAP_TWL4030_H_ */ diff --git a/include/linux/platform_data/omap-wd-timer.h b/include/linux/platform_data/omap-wd-timer.h new file mode 100644 index 000000000000..d75f5f802d98 --- /dev/null +++ b/include/linux/platform_data/omap-wd-timer.h @@ -0,0 +1,38 @@ +/* + * OMAP2+ WDTIMER-specific function prototypes + * + * Copyright (C) 2012 Texas Instruments, Inc. + * Paul Walmsley + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +#ifndef __LINUX_PLATFORM_DATA_OMAP_WD_TIMER_H +#define __LINUX_PLATFORM_DATA_OMAP_WD_TIMER_H + +#include <linux/types.h> + +/* + * Standardized OMAP reset source bits + * + * This is a subset of the ones listed in arch/arm/mach-omap2/prm.h + * and are the only ones needed in the watchdog driver. + */ +#define OMAP_MPU_WD_RST_SRC_ID_SHIFT 3 + +/** + * struct omap_wd_timer_platform_data - WDTIMER integration to the host SoC + * @read_reset_sources - fn ptr for the SoC to indicate the last reset cause + * + * The function pointed to by @read_reset_sources must return its data + * in a standard format - search for RST_SRC_ID_SHIFT in + * arch/arm/mach-omap2 + */ +struct omap_wd_timer_platform_data { + u32 (*read_reset_sources)(void); +}; + +#endif diff --git a/include/linux/platform_data/omap_drm.h b/include/linux/platform_data/omap_drm.h index 3da73bdc2031..f4e4a237ebd2 100644 --- a/include/linux/platform_data/omap_drm.h +++ b/include/linux/platform_data/omap_drm.h @@ -46,6 +46,7 @@ struct omap_kms_platform_data { }; struct omap_drm_platform_data { + uint32_t omaprev; struct omap_kms_platform_data *kms_pdata; }; diff --git a/include/linux/platform_data/pinctrl-coh901.h b/include/linux/platform_data/pinctrl-coh901.h index 30dea251b835..dfbc65d10484 100644 --- a/include/linux/platform_data/pinctrl-coh901.h +++ b/include/linux/platform_data/pinctrl-coh901.h @@ -13,14 +13,10 @@ * struct u300_gpio_platform - U300 GPIO platform data * @ports: number of GPIO block ports * @gpio_base: first GPIO number for this block (use a free range) - * @gpio_irq_base: first GPIO IRQ number for this block (use a free range) - * @pinctrl_device: pin control device to spawn as child */ struct u300_gpio_platform { u8 ports; int gpio_base; - int gpio_irq_base; - struct platform_device *pinctrl_device; }; #endif /* __MACH_U300_GPIO_U300_H */ diff --git a/include/linux/platform_data/pinctrl-nomadik.h b/include/linux/platform_data/pinctrl-nomadik.h new file mode 100644 index 000000000000..f73b2f0c55b7 --- /dev/null +++ b/include/linux/platform_data/pinctrl-nomadik.h @@ -0,0 +1,266 @@ +/* + * Structures and registers for GPIO access in the Nomadik SoC + * + * Copyright (C) 2008 STMicroelectronics + * Author: Prafulla WADASKAR <prafulla.wadaskar@st.com> + * Copyright (C) 2009 Alessandro Rubini <rubini@unipv.it> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#ifndef __PLAT_NOMADIK_GPIO +#define __PLAT_NOMADIK_GPIO + +/* + * pin configurations are represented by 32-bit integers: + * + * bit 0.. 8 - Pin Number (512 Pins Maximum) + * bit 9..10 - Alternate Function Selection + * bit 11..12 - Pull up/down state + * bit 13 - Sleep mode behaviour + * bit 14 - Direction + * bit 15 - Value (if output) + * bit 16..18 - SLPM pull up/down state + * bit 19..20 - SLPM direction + * bit 21..22 - SLPM Value (if output) + * bit 23..25 - PDIS value (if input) + * bit 26 - Gpio mode + * bit 27 - Sleep mode + * + * to facilitate the definition, the following macros are provided + * + * PIN_CFG_DEFAULT - default config (0): + * pull up/down = disabled + * sleep mode = input/wakeup + * direction = input + * value = low + * SLPM direction = same as normal + * SLPM pull = same as normal + * SLPM value = same as normal + * + * PIN_CFG - default config with alternate function + */ + +typedef unsigned long pin_cfg_t; + +#define PIN_NUM_MASK 0x1ff +#define PIN_NUM(x) ((x) & PIN_NUM_MASK) + +#define PIN_ALT_SHIFT 9 +#define PIN_ALT_MASK (0x3 << PIN_ALT_SHIFT) +#define PIN_ALT(x) (((x) & PIN_ALT_MASK) >> PIN_ALT_SHIFT) +#define PIN_GPIO (NMK_GPIO_ALT_GPIO << PIN_ALT_SHIFT) +#define PIN_ALT_A (NMK_GPIO_ALT_A << PIN_ALT_SHIFT) +#define PIN_ALT_B (NMK_GPIO_ALT_B << PIN_ALT_SHIFT) +#define PIN_ALT_C (NMK_GPIO_ALT_C << PIN_ALT_SHIFT) + +#define PIN_PULL_SHIFT 11 +#define PIN_PULL_MASK (0x3 << PIN_PULL_SHIFT) +#define PIN_PULL(x) (((x) & PIN_PULL_MASK) >> PIN_PULL_SHIFT) +#define PIN_PULL_NONE (NMK_GPIO_PULL_NONE << PIN_PULL_SHIFT) +#define PIN_PULL_UP (NMK_GPIO_PULL_UP << PIN_PULL_SHIFT) +#define PIN_PULL_DOWN (NMK_GPIO_PULL_DOWN << PIN_PULL_SHIFT) + +#define PIN_SLPM_SHIFT 13 +#define PIN_SLPM_MASK (0x1 << PIN_SLPM_SHIFT) +#define PIN_SLPM(x) (((x) & PIN_SLPM_MASK) >> PIN_SLPM_SHIFT) +#define PIN_SLPM_MAKE_INPUT (NMK_GPIO_SLPM_INPUT << PIN_SLPM_SHIFT) +#define PIN_SLPM_NOCHANGE (NMK_GPIO_SLPM_NOCHANGE << PIN_SLPM_SHIFT) +/* These two replace the above in DB8500v2+ */ +#define PIN_SLPM_WAKEUP_ENABLE (NMK_GPIO_SLPM_WAKEUP_ENABLE << PIN_SLPM_SHIFT) +#define PIN_SLPM_WAKEUP_DISABLE (NMK_GPIO_SLPM_WAKEUP_DISABLE << PIN_SLPM_SHIFT) +#define PIN_SLPM_USE_MUX_SETTINGS_IN_SLEEP PIN_SLPM_WAKEUP_DISABLE + +#define PIN_SLPM_GPIO PIN_SLPM_WAKEUP_ENABLE /* In SLPM, pin is a gpio */ +#define PIN_SLPM_ALTFUNC PIN_SLPM_WAKEUP_DISABLE /* In SLPM, pin is altfunc */ + +#define PIN_DIR_SHIFT 14 +#define PIN_DIR_MASK (0x1 << PIN_DIR_SHIFT) +#define PIN_DIR(x) (((x) & PIN_DIR_MASK) >> PIN_DIR_SHIFT) +#define PIN_DIR_INPUT (0 << PIN_DIR_SHIFT) +#define PIN_DIR_OUTPUT (1 << PIN_DIR_SHIFT) + +#define PIN_VAL_SHIFT 15 +#define PIN_VAL_MASK (0x1 << PIN_VAL_SHIFT) +#define PIN_VAL(x) (((x) & PIN_VAL_MASK) >> PIN_VAL_SHIFT) +#define PIN_VAL_LOW (0 << PIN_VAL_SHIFT) +#define PIN_VAL_HIGH (1 << PIN_VAL_SHIFT) + +#define PIN_SLPM_PULL_SHIFT 16 +#define PIN_SLPM_PULL_MASK (0x7 << PIN_SLPM_PULL_SHIFT) +#define PIN_SLPM_PULL(x) \ + (((x) & PIN_SLPM_PULL_MASK) >> PIN_SLPM_PULL_SHIFT) +#define PIN_SLPM_PULL_NONE \ + ((1 + NMK_GPIO_PULL_NONE) << PIN_SLPM_PULL_SHIFT) +#define PIN_SLPM_PULL_UP \ + ((1 + NMK_GPIO_PULL_UP) << PIN_SLPM_PULL_SHIFT) +#define PIN_SLPM_PULL_DOWN \ + ((1 + NMK_GPIO_PULL_DOWN) << PIN_SLPM_PULL_SHIFT) + +#define PIN_SLPM_DIR_SHIFT 19 +#define PIN_SLPM_DIR_MASK (0x3 << PIN_SLPM_DIR_SHIFT) +#define PIN_SLPM_DIR(x) \ + (((x) & PIN_SLPM_DIR_MASK) >> PIN_SLPM_DIR_SHIFT) +#define PIN_SLPM_DIR_INPUT ((1 + 0) << PIN_SLPM_DIR_SHIFT) +#define PIN_SLPM_DIR_OUTPUT ((1 + 1) << PIN_SLPM_DIR_SHIFT) + +#define PIN_SLPM_VAL_SHIFT 21 +#define PIN_SLPM_VAL_MASK (0x3 << PIN_SLPM_VAL_SHIFT) +#define PIN_SLPM_VAL(x) \ + (((x) & PIN_SLPM_VAL_MASK) >> PIN_SLPM_VAL_SHIFT) +#define PIN_SLPM_VAL_LOW ((1 + 0) << PIN_SLPM_VAL_SHIFT) +#define PIN_SLPM_VAL_HIGH ((1 + 1) << PIN_SLPM_VAL_SHIFT) + +#define PIN_SLPM_PDIS_SHIFT 23 +#define PIN_SLPM_PDIS_MASK (0x3 << PIN_SLPM_PDIS_SHIFT) +#define PIN_SLPM_PDIS(x) \ + (((x) & PIN_SLPM_PDIS_MASK) >> PIN_SLPM_PDIS_SHIFT) +#define PIN_SLPM_PDIS_NO_CHANGE (0 << PIN_SLPM_PDIS_SHIFT) +#define PIN_SLPM_PDIS_DISABLED (1 << PIN_SLPM_PDIS_SHIFT) +#define PIN_SLPM_PDIS_ENABLED (2 << PIN_SLPM_PDIS_SHIFT) + +#define PIN_LOWEMI_SHIFT 25 +#define PIN_LOWEMI_MASK (0x1 << PIN_LOWEMI_SHIFT) +#define PIN_LOWEMI(x) (((x) & PIN_LOWEMI_MASK) >> PIN_LOWEMI_SHIFT) +#define PIN_LOWEMI_DISABLED (0 << PIN_LOWEMI_SHIFT) +#define PIN_LOWEMI_ENABLED (1 << PIN_LOWEMI_SHIFT) + +#define PIN_GPIOMODE_SHIFT 26 +#define PIN_GPIOMODE_MASK (0x1 << PIN_GPIOMODE_SHIFT) +#define PIN_GPIOMODE(x) (((x) & PIN_GPIOMODE_MASK) >> PIN_GPIOMODE_SHIFT) +#define PIN_GPIOMODE_DISABLED (0 << PIN_GPIOMODE_SHIFT) +#define PIN_GPIOMODE_ENABLED (1 << PIN_GPIOMODE_SHIFT) + +#define PIN_SLEEPMODE_SHIFT 27 +#define PIN_SLEEPMODE_MASK (0x1 << PIN_SLEEPMODE_SHIFT) +#define PIN_SLEEPMODE(x) (((x) & PIN_SLEEPMODE_MASK) >> PIN_SLEEPMODE_SHIFT) +#define PIN_SLEEPMODE_DISABLED (0 << PIN_SLEEPMODE_SHIFT) +#define PIN_SLEEPMODE_ENABLED (1 << PIN_SLEEPMODE_SHIFT) + + +/* Shortcuts. Use these instead of separate DIR, PULL, and VAL. */ +#define PIN_INPUT_PULLDOWN (PIN_DIR_INPUT | PIN_PULL_DOWN) +#define PIN_INPUT_PULLUP (PIN_DIR_INPUT | PIN_PULL_UP) +#define PIN_INPUT_NOPULL (PIN_DIR_INPUT | PIN_PULL_NONE) +#define PIN_OUTPUT_LOW (PIN_DIR_OUTPUT | PIN_VAL_LOW) +#define PIN_OUTPUT_HIGH (PIN_DIR_OUTPUT | PIN_VAL_HIGH) + +#define PIN_SLPM_INPUT_PULLDOWN (PIN_SLPM_DIR_INPUT | PIN_SLPM_PULL_DOWN) +#define PIN_SLPM_INPUT_PULLUP (PIN_SLPM_DIR_INPUT | PIN_SLPM_PULL_UP) +#define PIN_SLPM_INPUT_NOPULL (PIN_SLPM_DIR_INPUT | PIN_SLPM_PULL_NONE) +#define PIN_SLPM_OUTPUT_LOW (PIN_SLPM_DIR_OUTPUT | PIN_SLPM_VAL_LOW) +#define PIN_SLPM_OUTPUT_HIGH (PIN_SLPM_DIR_OUTPUT | PIN_SLPM_VAL_HIGH) + +#define PIN_CFG_DEFAULT (0) + +#define PIN_CFG(num, alt) \ + (PIN_CFG_DEFAULT |\ + (PIN_NUM(num) | PIN_##alt)) + +#define PIN_CFG_INPUT(num, alt, pull) \ + (PIN_CFG_DEFAULT |\ + (PIN_NUM(num) | PIN_##alt | PIN_INPUT_##pull)) + +#define PIN_CFG_OUTPUT(num, alt, val) \ + (PIN_CFG_DEFAULT |\ + (PIN_NUM(num) | PIN_##alt | PIN_OUTPUT_##val)) + +/* + * "nmk_gpio" and "NMK_GPIO" stand for "Nomadik GPIO", leaving + * the "gpio" namespace for generic and cross-machine functions + */ + +#define GPIO_BLOCK_SHIFT 5 +#define NMK_GPIO_PER_CHIP (1 << GPIO_BLOCK_SHIFT) + +/* Register in the logic block */ +#define NMK_GPIO_DAT 0x00 +#define NMK_GPIO_DATS 0x04 +#define NMK_GPIO_DATC 0x08 +#define NMK_GPIO_PDIS 0x0c +#define NMK_GPIO_DIR 0x10 +#define NMK_GPIO_DIRS 0x14 +#define NMK_GPIO_DIRC 0x18 +#define NMK_GPIO_SLPC 0x1c +#define NMK_GPIO_AFSLA 0x20 +#define NMK_GPIO_AFSLB 0x24 +#define NMK_GPIO_LOWEMI 0x28 + +#define NMK_GPIO_RIMSC 0x40 +#define NMK_GPIO_FIMSC 0x44 +#define NMK_GPIO_IS 0x48 +#define NMK_GPIO_IC 0x4c +#define NMK_GPIO_RWIMSC 0x50 +#define NMK_GPIO_FWIMSC 0x54 +#define NMK_GPIO_WKS 0x58 +/* These appear in DB8540 and later ASICs */ +#define NMK_GPIO_EDGELEVEL 0x5C +#define NMK_GPIO_LEVEL 0x60 + +/* Alternate functions: function C is set in hw by setting both A and B */ +#define NMK_GPIO_ALT_GPIO 0 +#define NMK_GPIO_ALT_A 1 +#define NMK_GPIO_ALT_B 2 +#define NMK_GPIO_ALT_C (NMK_GPIO_ALT_A | NMK_GPIO_ALT_B) + +#define NMK_GPIO_ALT_CX_SHIFT 2 +#define NMK_GPIO_ALT_C1 ((1<<NMK_GPIO_ALT_CX_SHIFT) | NMK_GPIO_ALT_C) +#define NMK_GPIO_ALT_C2 ((2<<NMK_GPIO_ALT_CX_SHIFT) | NMK_GPIO_ALT_C) +#define NMK_GPIO_ALT_C3 ((3<<NMK_GPIO_ALT_CX_SHIFT) | NMK_GPIO_ALT_C) +#define NMK_GPIO_ALT_C4 ((4<<NMK_GPIO_ALT_CX_SHIFT) | NMK_GPIO_ALT_C) + +/* Pull up/down values */ +enum nmk_gpio_pull { + NMK_GPIO_PULL_NONE, + NMK_GPIO_PULL_UP, + NMK_GPIO_PULL_DOWN, +}; + +/* Sleep mode */ +enum nmk_gpio_slpm { + NMK_GPIO_SLPM_INPUT, + NMK_GPIO_SLPM_WAKEUP_ENABLE = NMK_GPIO_SLPM_INPUT, + NMK_GPIO_SLPM_NOCHANGE, + NMK_GPIO_SLPM_WAKEUP_DISABLE = NMK_GPIO_SLPM_NOCHANGE, +}; + +/* Older deprecated pin config API that should go away soon */ +extern int nmk_config_pin(pin_cfg_t cfg, bool sleep); +extern int nmk_config_pins(pin_cfg_t *cfgs, int num); +extern int nmk_config_pins_sleep(pin_cfg_t *cfgs, int num); +extern int nmk_gpio_set_slpm(int gpio, enum nmk_gpio_slpm mode); +extern int nmk_gpio_set_pull(int gpio, enum nmk_gpio_pull pull); +#ifdef CONFIG_PINCTRL_NOMADIK +extern int nmk_gpio_set_mode(int gpio, int gpio_mode); +#else +static inline int nmk_gpio_set_mode(int gpio, int gpio_mode) +{ + return -ENODEV; +} +#endif +extern int nmk_gpio_get_mode(int gpio); + +extern void nmk_gpio_wakeups_suspend(void); +extern void nmk_gpio_wakeups_resume(void); + +extern void nmk_gpio_clocks_enable(void); +extern void nmk_gpio_clocks_disable(void); + +extern void nmk_gpio_read_pull(int gpio_bank, u32 *pull_up); + +/* + * Platform data to register a block: only the initial gpio/irq number. + */ +struct nmk_gpio_platform_data { + char *name; + int first_gpio; + int first_irq; + int num_gpio; + u32 (*get_secondary_status)(unsigned int bank); + void (*set_ioforce)(bool enable); + bool supports_sleepmode; +}; + +#endif /* __PLAT_NOMADIK_GPIO */ diff --git a/include/linux/platform_data/pn544.h b/include/linux/platform_data/pn544.h new file mode 100644 index 000000000000..713bfd703342 --- /dev/null +++ b/include/linux/platform_data/pn544.h @@ -0,0 +1,44 @@ +/* + * Driver include for the PN544 NFC chip. + * + * Copyright (C) Nokia Corporation + * + * Author: Jari Vanhala <ext-jari.vanhala@nokia.com> + * Contact: Matti Aaltoenn <matti.j.aaltonen@nokia.com> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#ifndef _PN544_H_ +#define _PN544_H_ + +#include <linux/i2c.h> + +enum { + NFC_GPIO_ENABLE, + NFC_GPIO_FW_RESET, + NFC_GPIO_IRQ +}; + +/* board config */ +struct pn544_nfc_platform_data { + int (*request_resources) (struct i2c_client *client); + void (*free_resources) (void); + void (*enable) (int fw); + int (*test) (void); + void (*disable) (void); + int (*get_gpio)(int type); +}; + +#endif /* _PN544_H_ */ diff --git a/include/linux/platform_data/pxa2xx_udc.h b/include/linux/platform_data/pxa2xx_udc.h new file mode 100644 index 000000000000..c6c5e98b5b82 --- /dev/null +++ b/include/linux/platform_data/pxa2xx_udc.h @@ -0,0 +1,27 @@ +/* + * This supports machine-specific differences in how the PXA2xx + * USB Device Controller (UDC) is wired. + * + * It is set in linux/arch/arm/mach-pxa/<machine>.c or in + * linux/arch/mach-ixp4xx/<machine>.c and used in + * the probe routine of linux/drivers/usb/gadget/pxa2xx_udc.c + */ +#ifndef PXA2XX_UDC_H +#define PXA2XX_UDC_H + +struct pxa2xx_udc_mach_info { + int (*udc_is_connected)(void); /* do we see host? */ + void (*udc_command)(int cmd); +#define PXA2XX_UDC_CMD_CONNECT 0 /* let host see us */ +#define PXA2XX_UDC_CMD_DISCONNECT 1 /* so host won't see us */ + + /* Boards following the design guidelines in the developer's manual, + * with on-chip GPIOs not Lubbock's weird hardware, can have a sane + * VBUS IRQ and omit the methods above. Store the GPIO number + * here. Note that sometimes the signals go through inverters... + */ + bool gpio_pullup_inverted; + int gpio_pullup; /* high == pullup activated */ +}; + +#endif diff --git a/include/linux/platform_data/pxa_sdhci.h b/include/linux/platform_data/pxa_sdhci.h index 59acd987ed34..27d3156d093a 100644 --- a/include/linux/platform_data/pxa_sdhci.h +++ b/include/linux/platform_data/pxa_sdhci.h @@ -38,6 +38,7 @@ * @max_speed: the maximum speed supported * @host_caps: Standard MMC host capabilities bit field. * @quirks: quirks of platfrom + * @quirks2: quirks2 of platfrom * @pm_caps: pm_caps of platfrom */ struct sdhci_pxa_platdata { @@ -48,9 +49,10 @@ struct sdhci_pxa_platdata { unsigned int ext_cd_gpio; bool ext_cd_gpio_invert; unsigned int max_speed; - unsigned int host_caps; - unsigned int host_caps2; + u32 host_caps; + u32 host_caps2; unsigned int quirks; + unsigned int quirks2; unsigned int pm_caps; }; diff --git a/include/linux/platform_data/sa11x0-serial.h b/include/linux/platform_data/sa11x0-serial.h new file mode 100644 index 000000000000..4504d5d592f0 --- /dev/null +++ b/include/linux/platform_data/sa11x0-serial.h @@ -0,0 +1,33 @@ +/* + * Author: Nicolas Pitre + * + * Moved and changed lots, Russell King + * + * Low level machine dependent UART functions. + */ +#ifndef SA11X0_SERIAL_H +#define SA11X0_SERIAL_H + +struct uart_port; +struct uart_info; + +/* + * This is a temporary structure for registering these + * functions; it is intended to be discarded after boot. + */ +struct sa1100_port_fns { + void (*set_mctrl)(struct uart_port *, u_int); + u_int (*get_mctrl)(struct uart_port *); + void (*pm)(struct uart_port *, u_int, u_int); + int (*set_wake)(struct uart_port *, u_int); +}; + +#ifdef CONFIG_SERIAL_SA1100 +void sa1100_register_uart_fns(struct sa1100_port_fns *fns); +void sa1100_register_uart(int idx, int port); +#else +#define sa1100_register_uart_fns(fns) do { } while (0) +#define sa1100_register_uart(idx,port) do { } while (0) +#endif + +#endif diff --git a/include/linux/platform_data/spi-clps711x.h b/include/linux/platform_data/spi-clps711x.h new file mode 100644 index 000000000000..301956e63143 --- /dev/null +++ b/include/linux/platform_data/spi-clps711x.h @@ -0,0 +1,21 @@ +/* + * CLPS711X SPI bus driver definitions + * + * Copyright (C) 2012 Alexander Shiyan <shc_work@mail.ru> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +#ifndef ____LINUX_PLATFORM_DATA_SPI_CLPS711X_H +#define ____LINUX_PLATFORM_DATA_SPI_CLPS711X_H + +/* Board specific platform_data */ +struct spi_clps711x_pdata { + int *chipselect; /* Array of GPIO-numbers */ + int num_chipselect; /* Total count of GPIOs */ +}; + +#endif diff --git a/include/linux/platform_data/spi-omap2-mcspi.h b/include/linux/platform_data/spi-omap2-mcspi.h index a357eb26bd25..a65572d53211 100644 --- a/include/linux/platform_data/spi-omap2-mcspi.h +++ b/include/linux/platform_data/spi-omap2-mcspi.h @@ -7,9 +7,13 @@ #define OMAP4_MCSPI_REG_OFFSET 0x100 +#define MCSPI_PINDIR_D0_IN_D1_OUT 0 +#define MCSPI_PINDIR_D0_OUT_D1_IN 1 + struct omap2_mcspi_platform_config { unsigned short num_cs; unsigned int regs_offset; + unsigned int pin_dir:1; }; struct omap2_mcspi_dev_attr { diff --git a/include/linux/platform_data/uio_dmem_genirq.h b/include/linux/platform_data/uio_dmem_genirq.h new file mode 100644 index 000000000000..973c1bb32168 --- /dev/null +++ b/include/linux/platform_data/uio_dmem_genirq.h @@ -0,0 +1,26 @@ +/* + * include/linux/platform_data/uio_dmem_genirq.h + * + * Copyright (C) 2012 Damian Hobson-Garcia + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation version 2. + * + * This program is distributed "as is" WITHOUT ANY WARRANTY of any + * kind, whether express or implied; without even the implied warranty + * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#ifndef _UIO_DMEM_GENIRQ_H +#define _UIO_DMEM_GENIRQ_H + +#include <linux/uio_driver.h> + +struct uio_dmem_genirq_pdata { + struct uio_info uioinfo; + unsigned int *dynamic_region_sizes; + unsigned int num_dynamic_regions; +}; +#endif /* _UIO_DMEM_GENIRQ_H */ diff --git a/include/linux/platform_data/uio_pruss.h b/include/linux/platform_data/uio_pruss.h index f39140aabc6f..3d47d219827f 100644 --- a/include/linux/platform_data/uio_pruss.h +++ b/include/linux/platform_data/uio_pruss.h @@ -20,6 +20,7 @@ /* To configure the PRUSS INTC base offset for UIO driver */ struct uio_pruss_pdata { - u32 pintc_base; + u32 pintc_base; + struct gen_pool *sram_pool; }; #endif /* _UIO_PRUSS_H_ */ diff --git a/include/linux/platform_data/usb-omap.h b/include/linux/platform_data/usb-omap.h new file mode 100644 index 000000000000..8570bcfe6311 --- /dev/null +++ b/include/linux/platform_data/usb-omap.h @@ -0,0 +1,80 @@ +/* + * usb-omap.h - Platform data for the various OMAP USB IPs + * + * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com + * + * This software is distributed under the terms of the GNU General Public + * License ("GPL") version 2, as published by the Free Software Foundation. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" + * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE + * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE + * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR + * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF + * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS + * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN + * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) + * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE + * POSSIBILITY OF SUCH DAMAGE. + */ + +#define OMAP3_HS_USB_PORTS 3 + +enum usbhs_omap_port_mode { + OMAP_USBHS_PORT_MODE_UNUSED, + OMAP_EHCI_PORT_MODE_PHY, + OMAP_EHCI_PORT_MODE_TLL, + OMAP_EHCI_PORT_MODE_HSIC, + OMAP_OHCI_PORT_MODE_PHY_6PIN_DATSE0, + OMAP_OHCI_PORT_MODE_PHY_6PIN_DPDM, + OMAP_OHCI_PORT_MODE_PHY_3PIN_DATSE0, + OMAP_OHCI_PORT_MODE_PHY_4PIN_DPDM, + OMAP_OHCI_PORT_MODE_TLL_6PIN_DATSE0, + OMAP_OHCI_PORT_MODE_TLL_6PIN_DPDM, + OMAP_OHCI_PORT_MODE_TLL_3PIN_DATSE0, + OMAP_OHCI_PORT_MODE_TLL_4PIN_DPDM, + OMAP_OHCI_PORT_MODE_TLL_2PIN_DATSE0, + OMAP_OHCI_PORT_MODE_TLL_2PIN_DPDM +}; + +struct usbtll_omap_platform_data { + enum usbhs_omap_port_mode port_mode[OMAP3_HS_USB_PORTS]; +}; + +struct ehci_hcd_omap_platform_data { + enum usbhs_omap_port_mode port_mode[OMAP3_HS_USB_PORTS]; + int reset_gpio_port[OMAP3_HS_USB_PORTS]; + struct regulator *regulator[OMAP3_HS_USB_PORTS]; + unsigned phy_reset:1; +}; + +struct ohci_hcd_omap_platform_data { + enum usbhs_omap_port_mode port_mode[OMAP3_HS_USB_PORTS]; + unsigned es2_compatibility:1; +}; + +struct usbhs_omap_platform_data { + enum usbhs_omap_port_mode port_mode[OMAP3_HS_USB_PORTS]; + + struct ehci_hcd_omap_platform_data *ehci_data; + struct ohci_hcd_omap_platform_data *ohci_data; +}; + +/*-------------------------------------------------------------------------*/ + +struct omap_musb_board_data { + u8 interface_type; + u8 mode; + u16 power; + unsigned extvbus:1; + void (*set_phy_power)(u8 on); + void (*clear_irq)(void); + void (*set_mode)(u8 mode); + void (*reset)(void); +}; + +enum musb_interface { + MUSB_INTERFACE_ULPI, + MUSB_INTERFACE_UTMI +}; diff --git a/include/linux/platform_device.h b/include/linux/platform_device.h index 5711e9525a2a..a9ded9a3c175 100644 --- a/include/linux/platform_device.h +++ b/include/linux/platform_device.h @@ -55,6 +55,7 @@ extern int platform_add_devices(struct platform_device **, int); struct platform_device_info { struct device *parent; + struct acpi_dev_node acpi_node; const char *name; int id; diff --git a/include/linux/pm.h b/include/linux/pm.h index 007e687c4f69..03d7bb145311 100644 --- a/include/linux/pm.h +++ b/include/linux/pm.h @@ -546,10 +546,9 @@ struct dev_pm_info { unsigned long active_jiffies; unsigned long suspended_jiffies; unsigned long accounting_timestamp; - struct dev_pm_qos_request *pq_req; #endif struct pm_subsys_data *subsys_data; /* Owned by the subsystem. */ - struct pm_qos_constraints *constraints; + struct dev_pm_qos *qos; }; extern void update_pm_runtime_accounting(struct device *dev); diff --git a/include/linux/pm_qos.h b/include/linux/pm_qos.h index 9924ea1f22e0..5a95013905c8 100644 --- a/include/linux/pm_qos.h +++ b/include/linux/pm_qos.h @@ -20,6 +20,13 @@ enum { PM_QOS_NUM_CLASSES, }; +enum pm_qos_flags_status { + PM_QOS_FLAGS_UNDEFINED = -1, + PM_QOS_FLAGS_NONE, + PM_QOS_FLAGS_SOME, + PM_QOS_FLAGS_ALL, +}; + #define PM_QOS_DEFAULT_VALUE -1 #define PM_QOS_CPU_DMA_LAT_DEFAULT_VALUE (2000 * USEC_PER_SEC) @@ -27,14 +34,31 @@ enum { #define PM_QOS_NETWORK_THROUGHPUT_DEFAULT_VALUE 0 #define PM_QOS_DEV_LAT_DEFAULT_VALUE 0 +#define PM_QOS_FLAG_NO_POWER_OFF (1 << 0) +#define PM_QOS_FLAG_REMOTE_WAKEUP (1 << 1) + struct pm_qos_request { struct plist_node node; int pm_qos_class; struct delayed_work work; /* for pm_qos_update_request_timeout */ }; +struct pm_qos_flags_request { + struct list_head node; + s32 flags; /* Do not change to 64 bit */ +}; + +enum dev_pm_qos_req_type { + DEV_PM_QOS_LATENCY = 1, + DEV_PM_QOS_FLAGS, +}; + struct dev_pm_qos_request { - struct plist_node node; + enum dev_pm_qos_req_type type; + union { + struct plist_node pnode; + struct pm_qos_flags_request flr; + } data; struct device *dev; }; @@ -45,8 +69,8 @@ enum pm_qos_type { }; /* - * Note: The lockless read path depends on the CPU accessing - * target_value atomically. Atomic access is only guaranteed on all CPU + * Note: The lockless read path depends on the CPU accessing target_value + * or effective_flags atomically. Atomic access is only guaranteed on all CPU * types linux supports for 32 bit quantites */ struct pm_qos_constraints { @@ -57,6 +81,18 @@ struct pm_qos_constraints { struct blocking_notifier_head *notifiers; }; +struct pm_qos_flags { + struct list_head list; + s32 effective_flags; /* Do not change to 64 bit */ +}; + +struct dev_pm_qos { + struct pm_qos_constraints latency; + struct pm_qos_flags flags; + struct dev_pm_qos_request *latency_req; + struct dev_pm_qos_request *flags_req; +}; + /* Action requested to pm_qos_update_target */ enum pm_qos_req_action { PM_QOS_ADD_REQ, /* Add a new request */ @@ -71,6 +107,9 @@ static inline int dev_pm_qos_request_active(struct dev_pm_qos_request *req) int pm_qos_update_target(struct pm_qos_constraints *c, struct plist_node *node, enum pm_qos_req_action action, int value); +bool pm_qos_update_flags(struct pm_qos_flags *pqf, + struct pm_qos_flags_request *req, + enum pm_qos_req_action action, s32 val); void pm_qos_add_request(struct pm_qos_request *req, int pm_qos_class, s32 value); void pm_qos_update_request(struct pm_qos_request *req, @@ -86,10 +125,12 @@ int pm_qos_request_active(struct pm_qos_request *req); s32 pm_qos_read_value(struct pm_qos_constraints *c); #ifdef CONFIG_PM +enum pm_qos_flags_status __dev_pm_qos_flags(struct device *dev, s32 mask); +enum pm_qos_flags_status dev_pm_qos_flags(struct device *dev, s32 mask); s32 __dev_pm_qos_read_value(struct device *dev); s32 dev_pm_qos_read_value(struct device *dev); int dev_pm_qos_add_request(struct device *dev, struct dev_pm_qos_request *req, - s32 value); + enum dev_pm_qos_req_type type, s32 value); int dev_pm_qos_update_request(struct dev_pm_qos_request *req, s32 new_value); int dev_pm_qos_remove_request(struct dev_pm_qos_request *req); int dev_pm_qos_add_notifier(struct device *dev, @@ -103,12 +144,19 @@ void dev_pm_qos_constraints_destroy(struct device *dev); int dev_pm_qos_add_ancestor_request(struct device *dev, struct dev_pm_qos_request *req, s32 value); #else +static inline enum pm_qos_flags_status __dev_pm_qos_flags(struct device *dev, + s32 mask) + { return PM_QOS_FLAGS_UNDEFINED; } +static inline enum pm_qos_flags_status dev_pm_qos_flags(struct device *dev, + s32 mask) + { return PM_QOS_FLAGS_UNDEFINED; } static inline s32 __dev_pm_qos_read_value(struct device *dev) { return 0; } static inline s32 dev_pm_qos_read_value(struct device *dev) { return 0; } static inline int dev_pm_qos_add_request(struct device *dev, struct dev_pm_qos_request *req, + enum dev_pm_qos_req_type type, s32 value) { return 0; } static inline int dev_pm_qos_update_request(struct dev_pm_qos_request *req, @@ -144,10 +192,31 @@ static inline int dev_pm_qos_add_ancestor_request(struct device *dev, #ifdef CONFIG_PM_RUNTIME int dev_pm_qos_expose_latency_limit(struct device *dev, s32 value); void dev_pm_qos_hide_latency_limit(struct device *dev); +int dev_pm_qos_expose_flags(struct device *dev, s32 value); +void dev_pm_qos_hide_flags(struct device *dev); +int dev_pm_qos_update_flags(struct device *dev, s32 mask, bool set); + +static inline s32 dev_pm_qos_requested_latency(struct device *dev) +{ + return dev->power.qos->latency_req->data.pnode.prio; +} + +static inline s32 dev_pm_qos_requested_flags(struct device *dev) +{ + return dev->power.qos->flags_req->data.flr.flags; +} #else static inline int dev_pm_qos_expose_latency_limit(struct device *dev, s32 value) { return 0; } static inline void dev_pm_qos_hide_latency_limit(struct device *dev) {} +static inline int dev_pm_qos_expose_flags(struct device *dev, s32 value) + { return 0; } +static inline void dev_pm_qos_hide_flags(struct device *dev) {} +static inline int dev_pm_qos_update_flags(struct device *dev, s32 m, bool set) + { return 0; } + +static inline s32 dev_pm_qos_requested_latency(struct device *dev) { return 0; } +static inline s32 dev_pm_qos_requested_flags(struct device *dev) { return 0; } #endif #endif diff --git a/include/linux/power/bq2415x_charger.h b/include/linux/power/bq2415x_charger.h new file mode 100644 index 000000000000..97a1665eaeaf --- /dev/null +++ b/include/linux/power/bq2415x_charger.h @@ -0,0 +1,95 @@ +/* + * bq2415x charger driver + * + * Copyright (C) 2011-2012 Pali Rohár <pali.rohar@gmail.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA. + */ + +#ifndef BQ2415X_CHARGER_H +#define BQ2415X_CHARGER_H + +/* + * This is platform data for bq2415x chip. It contains default board + * voltages and currents which can be also later configured via sysfs. If + * value is -1 then default chip value (specified in datasheet) will be + * used. + * + * Value resistor_sense is needed for for configuring charge and + * termination current. It it is less or equal to zero, configuring charge + * and termination current will not be possible. + * + * Function set_mode_hook is needed for automode (setting correct current + * limit when charger is connected/disconnected or setting boost mode). + * When is NULL, automode function is disabled. When is not NULL, it must + * have this prototype: + * + * int (*set_mode_hook)( + * void (*hook)(enum bq2415x_mode mode, void *data), + * void *data) + * + * hook is hook function (see below) and data is pointer to driver private + * data + * + * bq2415x driver will call it as: + * + * platform_data->set_mode_hook(bq2415x_hook_function, bq2415x_device); + * + * Board/platform function set_mode_hook return non zero value when hook + * function was successful registered. Platform code should call that hook + * function (which get from pointer, with data) every time when charger + * was connected/disconnected or require to enable boost mode. bq2415x + * driver then will set correct current limit, enable/disable charger or + * boost mode. + * + * Hook function has this prototype: + * + * void hook(enum bq2415x_mode mode, void *data); + * + * mode is bq2415x mode (charger or boost) + * data is pointer to driver private data (which get from + * set_charger_type_hook) + * + * When bq driver is being unloaded, it call function: + * + * platform_data->set_mode_hook(NULL, NULL); + * + * (hook function and driver private data are NULL) + * + * After that board/platform code must not call driver hook function! It + * is possible that pointer to hook function will not be valid and calling + * will cause undefined result. + */ + +/* Supported modes with maximal current limit */ +enum bq2415x_mode { + BQ2415X_MODE_NONE, /* unknown or no charger (100mA) */ + BQ2415X_MODE_HOST_CHARGER, /* usb host/hub charger (500mA) */ + BQ2415X_MODE_DEDICATED_CHARGER, /* dedicated charger (unlimited) */ + BQ2415X_MODE_BOOST, /* boost mode (charging disabled) */ +}; + +struct bq2415x_platform_data { + int current_limit; /* mA */ + int weak_battery_voltage; /* mV */ + int battery_regulation_voltage; /* mV */ + int charge_current; /* mA */ + int termination_current; /* mA */ + int resistor_sense; /* m ohm */ + int (*set_mode_hook)(void (*hook)(enum bq2415x_mode mode, void *data), + void *data); +}; + +#endif diff --git a/include/linux/power/smartreflex.h b/include/linux/power/smartreflex.h index 4a496ebc7d73..c0f44c2b006d 100644 --- a/include/linux/power/smartreflex.h +++ b/include/linux/power/smartreflex.h @@ -260,8 +260,13 @@ struct omap_sr_nvalue_table { * * @name: instance name * @ip_type: Smartreflex IP type. - * @senp_mod: SENPENABLE value for the sr - * @senn_mod: SENNENABLE value for sr + * @senp_mod: SENPENABLE value of the sr CONFIG register + * @senn_mod: SENNENABLE value for sr CONFIG register + * @err_weight ERRWEIGHT value of the sr ERRCONFIG register + * @err_maxlimit ERRMAXLIMIT value of the sr ERRCONFIG register + * @accum_data ACCUMDATA value of the sr CONFIG register + * @senn_avgweight SENNAVGWEIGHT value of the sr AVGWEIGHT register + * @senp_avgweight SENPAVGWEIGHT value of the sr AVGWEIGHT register * @nvalue_count: Number of distinct nvalues in the nvalue table * @enable_on_init: whether this sr module needs to enabled at * boot up or not. @@ -274,6 +279,11 @@ struct omap_sr_data { int ip_type; u32 senp_mod; u32 senn_mod; + u32 err_weight; + u32 err_maxlimit; + u32 accum_data; + u32 senn_avgweight; + u32 senp_avgweight; int nvalue_count; bool enable_on_init; struct omap_sr_nvalue_table *nvalue_table; diff --git a/include/linux/power_supply.h b/include/linux/power_supply.h index e5ef45834c3c..1f0ab90aff00 100644 --- a/include/linux/power_supply.h +++ b/include/linux/power_supply.h @@ -114,6 +114,8 @@ enum power_supply_property { POWER_SUPPLY_PROP_CONSTANT_CHARGE_CURRENT_MAX, POWER_SUPPLY_PROP_CONSTANT_CHARGE_VOLTAGE, POWER_SUPPLY_PROP_CONSTANT_CHARGE_VOLTAGE_MAX, + POWER_SUPPLY_PROP_CHARGE_CONTROL_LIMIT, + POWER_SUPPLY_PROP_CHARGE_CONTROL_LIMIT_MAX, POWER_SUPPLY_PROP_ENERGY_FULL_DESIGN, POWER_SUPPLY_PROP_ENERGY_EMPTY_DESIGN, POWER_SUPPLY_PROP_ENERGY_FULL, @@ -186,6 +188,7 @@ struct power_supply { struct work_struct changed_work; #ifdef CONFIG_THERMAL struct thermal_zone_device *tzd; + struct thermal_cooling_device *tcd; #endif #ifdef CONFIG_LEDS_TRIGGERS diff --git a/include/linux/pstore.h b/include/linux/pstore.h index ee3034a40884..1788909d9a99 100644 --- a/include/linux/pstore.h +++ b/include/linux/pstore.h @@ -50,16 +50,18 @@ struct pstore_info { int (*open)(struct pstore_info *psi); int (*close)(struct pstore_info *psi); ssize_t (*read)(u64 *id, enum pstore_type_id *type, - struct timespec *time, char **buf, + int *count, struct timespec *time, char **buf, struct pstore_info *psi); int (*write)(enum pstore_type_id type, enum kmsg_dump_reason reason, u64 *id, - unsigned int part, size_t size, struct pstore_info *psi); + unsigned int part, int count, size_t size, + struct pstore_info *psi); int (*write_buf)(enum pstore_type_id type, enum kmsg_dump_reason reason, u64 *id, unsigned int part, const char *buf, size_t size, struct pstore_info *psi); int (*erase)(enum pstore_type_id type, u64 id, + int count, struct timespec time, struct pstore_info *psi); void *data; }; diff --git a/include/linux/ptrace.h b/include/linux/ptrace.h index e0ff4689d35a..a89ff04bddd9 100644 --- a/include/linux/ptrace.h +++ b/include/linux/ptrace.h @@ -329,6 +329,19 @@ static inline void user_single_step_siginfo(struct task_struct *tsk, #define current_pt_regs() task_pt_regs(current) #endif +#ifndef ptrace_signal_deliver +#define ptrace_signal_deliver() ((void)0) +#endif + +/* + * unlike current_pt_regs(), this one is equal to task_pt_regs(current) + * on *all* architectures; the only reason to have a per-arch definition + * is optimisation. + */ +#ifndef signal_pt_regs +#define signal_pt_regs() task_pt_regs(current) +#endif + extern int task_current_syscall(struct task_struct *target, long *callno, unsigned long args[6], unsigned int maxargs, unsigned long *sp, unsigned long *pc); diff --git a/include/linux/pvclock_gtod.h b/include/linux/pvclock_gtod.h new file mode 100644 index 000000000000..0ca75825b60d --- /dev/null +++ b/include/linux/pvclock_gtod.h @@ -0,0 +1,9 @@ +#ifndef _PVCLOCK_GTOD_H +#define _PVCLOCK_GTOD_H + +#include <linux/notifier.h> + +extern int pvclock_gtod_register_notifier(struct notifier_block *nb); +extern int pvclock_gtod_unregister_notifier(struct notifier_block *nb); + +#endif /* _PVCLOCK_GTOD_H */ diff --git a/include/linux/rculist.h b/include/linux/rculist.h index e0f0fab20415..c92dd28eaa6c 100644 --- a/include/linux/rculist.h +++ b/include/linux/rculist.h @@ -286,23 +286,6 @@ static inline void list_splice_init_rcu(struct list_head *list, &pos->member != (head); \ pos = list_entry_rcu(pos->member.next, typeof(*pos), member)) - -/** - * list_for_each_continue_rcu - * @pos: the &struct list_head to use as a loop cursor. - * @head: the head for your list. - * - * Iterate over an rcu-protected list, continuing after current point. - * - * This list-traversal primitive may safely run concurrently with - * the _rcu list-mutation primitives such as list_add_rcu() - * as long as the traversal is guarded by rcu_read_lock(). - */ -#define list_for_each_continue_rcu(pos, head) \ - for ((pos) = rcu_dereference_raw(list_next_rcu(pos)); \ - (pos) != (head); \ - (pos) = rcu_dereference_raw(list_next_rcu(pos))) - /** * list_for_each_entry_continue_rcu - continue iteration over list of given type * @pos: the type * to use as a loop cursor. diff --git a/include/linux/rcupdate.h b/include/linux/rcupdate.h index 7c968e4f929e..275aa3f1062d 100644 --- a/include/linux/rcupdate.h +++ b/include/linux/rcupdate.h @@ -90,6 +90,25 @@ extern void do_trace_rcu_torture_read(char *rcutorturename, * that started after call_rcu() was invoked. RCU read-side critical * sections are delimited by rcu_read_lock() and rcu_read_unlock(), * and may be nested. + * + * Note that all CPUs must agree that the grace period extended beyond + * all pre-existing RCU read-side critical section. On systems with more + * than one CPU, this means that when "func()" is invoked, each CPU is + * guaranteed to have executed a full memory barrier since the end of its + * last RCU read-side critical section whose beginning preceded the call + * to call_rcu(). It also means that each CPU executing an RCU read-side + * critical section that continues beyond the start of "func()" must have + * executed a memory barrier after the call_rcu() but before the beginning + * of that RCU read-side critical section. Note that these guarantees + * include CPUs that are offline, idle, or executing in user mode, as + * well as CPUs that are executing in the kernel. + * + * Furthermore, if CPU A invoked call_rcu() and CPU B invoked the + * resulting RCU callback function "func()", then both CPU A and CPU B are + * guaranteed to execute a full memory barrier during the time interval + * between the call to call_rcu() and the invocation of "func()" -- even + * if CPU A and CPU B are the same CPU (but again only if the system has + * more than one CPU). */ extern void call_rcu(struct rcu_head *head, void (*func)(struct rcu_head *head)); @@ -118,6 +137,9 @@ extern void call_rcu(struct rcu_head *head, * OR * - rcu_read_lock_bh() and rcu_read_unlock_bh(), if in process context. * These may be nested. + * + * See the description of call_rcu() for more detailed information on + * memory ordering guarantees. */ extern void call_rcu_bh(struct rcu_head *head, void (*func)(struct rcu_head *head)); @@ -137,6 +159,9 @@ extern void call_rcu_bh(struct rcu_head *head, * OR * anything that disables preemption. * These may be nested. + * + * See the description of call_rcu() for more detailed information on + * memory ordering guarantees. */ extern void call_rcu_sched(struct rcu_head *head, void (*func)(struct rcu_head *rcu)); @@ -197,13 +222,13 @@ extern void rcu_user_enter(void); extern void rcu_user_exit(void); extern void rcu_user_enter_after_irq(void); extern void rcu_user_exit_after_irq(void); -extern void rcu_user_hooks_switch(struct task_struct *prev, - struct task_struct *next); #else static inline void rcu_user_enter(void) { } static inline void rcu_user_exit(void) { } static inline void rcu_user_enter_after_irq(void) { } static inline void rcu_user_exit_after_irq(void) { } +static inline void rcu_user_hooks_switch(struct task_struct *prev, + struct task_struct *next) { } #endif /* CONFIG_RCU_USER_QS */ extern void exit_rcu(void); diff --git a/include/linux/regmap.h b/include/linux/regmap.h index e3bcc3f4dcb8..b7e95bf942c9 100644 --- a/include/linux/regmap.h +++ b/include/linux/regmap.h @@ -19,6 +19,7 @@ struct module; struct device; struct i2c_client; +struct irq_domain; struct spi_device; struct regmap; struct regmap_range_cfg; @@ -54,6 +55,39 @@ enum regmap_endian { }; /** + * A register range, used for access related checks + * (readable/writeable/volatile/precious checks) + * + * @range_min: address of first register + * @range_max: address of last register + */ +struct regmap_range { + unsigned int range_min; + unsigned int range_max; +}; + +/* + * A table of ranges including some yes ranges and some no ranges. + * If a register belongs to a no_range, the corresponding check function + * will return false. If a register belongs to a yes range, the corresponding + * check function will return true. "no_ranges" are searched first. + * + * @yes_ranges : pointer to an array of regmap ranges used as "yes ranges" + * @n_yes_ranges: size of the above array + * @no_ranges: pointer to an array of regmap ranges used as "no ranges" + * @n_no_ranges: size of the above array + */ +struct regmap_access_table { + const struct regmap_range *yes_ranges; + unsigned int n_yes_ranges; + const struct regmap_range *no_ranges; + unsigned int n_no_ranges; +}; + +typedef void (*regmap_lock)(void *); +typedef void (*regmap_unlock)(void *); + +/** * Configuration for the register map of a device. * * @name: Optional name of the regmap. Useful when a device has multiple @@ -67,16 +101,39 @@ enum regmap_endian { * @val_bits: Number of bits in a register value, mandatory. * * @writeable_reg: Optional callback returning true if the register - * can be written to. + * can be written to. If this field is NULL but wr_table + * (see below) is not, the check is performed on such table + * (a register is writeable if it belongs to one of the ranges + * specified by wr_table). * @readable_reg: Optional callback returning true if the register - * can be read from. + * can be read from. If this field is NULL but rd_table + * (see below) is not, the check is performed on such table + * (a register is readable if it belongs to one of the ranges + * specified by rd_table). * @volatile_reg: Optional callback returning true if the register - * value can't be cached. + * value can't be cached. If this field is NULL but + * volatile_table (see below) is not, the check is performed on + * such table (a register is volatile if it belongs to one of + * the ranges specified by volatile_table). * @precious_reg: Optional callback returning true if the rgister - * should not be read outside of a call from the driver - * (eg, a clear on read interrupt status register). + * should not be read outside of a call from the driver + * (eg, a clear on read interrupt status register). If this + * field is NULL but precious_table (see below) is not, the + * check is performed on such table (a register is precious if + * it belongs to one of the ranges specified by precious_table). + * @lock: Optional lock callback (overrides regmap's default lock + * function, based on spinlock or mutex). + * @unlock: As above for unlocking. + * @lock_arg: this field is passed as the only argument of lock/unlock + * functions (ignored in case regular lock/unlock functions + * are not overridden). * * @max_register: Optional, specifies the maximum valid register index. + * @wr_table: Optional, points to a struct regmap_access_table specifying + * valid ranges for write access. + * @rd_table: As above, for read access. + * @volatile_table: As above, for volatile registers. + * @precious_table: As above, for precious registers. * @reg_defaults: Power on reset values for registers (for use with * register cache support). * @num_reg_defaults: Number of elements in reg_defaults. @@ -116,8 +173,15 @@ struct regmap_config { bool (*readable_reg)(struct device *dev, unsigned int reg); bool (*volatile_reg)(struct device *dev, unsigned int reg); bool (*precious_reg)(struct device *dev, unsigned int reg); + regmap_lock lock; + regmap_unlock unlock; + void *lock_arg; unsigned int max_register; + const struct regmap_access_table *wr_table; + const struct regmap_access_table *rd_table; + const struct regmap_access_table *volatile_table; + const struct regmap_access_table *precious_table; const struct reg_default *reg_defaults; unsigned int num_reg_defaults; enum regcache_type cache_type; @@ -133,7 +197,7 @@ struct regmap_config { enum regmap_endian val_format_endian; const struct regmap_range_cfg *ranges; - unsigned int n_ranges; + unsigned int num_ranges; }; /** @@ -142,6 +206,8 @@ struct regmap_config { * 1. page selector register update; * 2. access through data window registers. * + * @name: Descriptive name for diagnostics + * * @range_min: Address of the lowest register address in virtual range. * @range_max: Address of the highest register in virtual range. * @@ -153,6 +219,8 @@ struct regmap_config { * @window_len: Number of registers in data window. */ struct regmap_range_cfg { + const char *name; + /* Registers of virtual address range */ unsigned int range_min; unsigned int range_max; @@ -181,7 +249,9 @@ typedef void (*regmap_hw_free_context)(void *context); * Description of a hardware bus for the register map infrastructure. * * @fast_io: Register IO is fast. Use a spinlock instead of a mutex - * to perform locking. + * to perform locking. This field is ignored if custom lock/unlock + * functions are used (see fields lock/unlock of + * struct regmap_config). * @write: Write operation. * @gather_write: Write operation with split register/value, return -ENOTSUPP * if not implemented on a given device. @@ -262,6 +332,16 @@ void regcache_mark_dirty(struct regmap *map); int regmap_register_patch(struct regmap *map, const struct reg_default *regs, int num_regs); +static inline bool regmap_reg_in_range(unsigned int reg, + const struct regmap_range *range) +{ + return reg >= range->range_min && reg <= range->range_max; +} + +bool regmap_reg_in_ranges(unsigned int reg, + const struct regmap_range *ranges, + unsigned int nranges); + /** * Description of an IRQ for the generic regmap irq_chip. * @@ -317,6 +397,7 @@ int regmap_add_irq_chip(struct regmap *map, int irq, int irq_flags, void regmap_del_irq_chip(int irq, struct regmap_irq_chip_data *data); int regmap_irq_chip_get_base(struct regmap_irq_chip_data *data); int regmap_irq_get_virq(struct regmap_irq_chip_data *data, int irq); +struct irq_domain *regmap_irq_get_domain(struct regmap_irq_chip_data *data); #else diff --git a/include/linux/regulator/consumer.h b/include/linux/regulator/consumer.h index c43cd3556b1f..7bc732ce6e50 100644 --- a/include/linux/regulator/consumer.h +++ b/include/linux/regulator/consumer.h @@ -160,6 +160,7 @@ int regulator_bulk_force_disable(int num_consumers, void regulator_bulk_free(int num_consumers, struct regulator_bulk_data *consumers); +int regulator_can_change_voltage(struct regulator *regulator); int regulator_count_voltages(struct regulator *regulator); int regulator_list_voltage(struct regulator *regulator, unsigned selector); int regulator_is_supported_voltage(struct regulator *regulator, @@ -358,6 +359,10 @@ static inline void regulator_set_drvdata(struct regulator *regulator, { } +static inline int regulator_count_voltages(struct regulator *regulator) +{ + return 0; +} #endif static inline int regulator_set_voltage_tol(struct regulator *regulator, @@ -367,4 +372,12 @@ static inline int regulator_set_voltage_tol(struct regulator *regulator, new_uV - tol_uV, new_uV + tol_uV); } +static inline int regulator_is_supported_voltage_tol(struct regulator *regulator, + int target_uV, int tol_uV) +{ + return regulator_is_supported_voltage(regulator, + target_uV - tol_uV, + target_uV + tol_uV); +} + #endif diff --git a/include/linux/regulator/driver.h b/include/linux/regulator/driver.h index 7932a3bf21bd..d10bb0f39c5e 100644 --- a/include/linux/regulator/driver.h +++ b/include/linux/regulator/driver.h @@ -181,10 +181,13 @@ enum regulator_type { * @type: Indicates if the regulator is a voltage or current regulator. * @owner: Module providing the regulator, used for refcounting. * + * @continuous_voltage_range: Indicates if the regulator can set any + * voltage within constrains range. * @n_voltages: Number of selectors available for ops.list_voltage(). * * @min_uV: Voltage given by the lowest selector (if linear mapping) * @uV_step: Voltage increase with each selector (if linear mapping) + * @linear_min_sel: Minimal selector for starting linear mapping * @ramp_delay: Time to settle down after voltage change (unit: uV/us) * @volt_table: Voltage mapping table (if table based mapping) * @@ -199,6 +202,7 @@ struct regulator_desc { const char *name; const char *supply_name; int id; + bool continuous_voltage_range; unsigned n_voltages; struct regulator_ops *ops; int irq; @@ -207,6 +211,7 @@ struct regulator_desc { unsigned int min_uV; unsigned int uV_step; + unsigned int linear_min_sel; unsigned int ramp_delay; const unsigned int *volt_table; diff --git a/include/linux/regulator/max8973-regulator.h b/include/linux/regulator/max8973-regulator.h new file mode 100644 index 000000000000..f8acc052e353 --- /dev/null +++ b/include/linux/regulator/max8973-regulator.h @@ -0,0 +1,72 @@ +/* + * max8973-regulator.h -- MAXIM 8973 regulator + * + * Interface for regulator driver for MAXIM 8973 DC-DC step-down + * switching regulator. + * + * Copyright (C) 2012 NVIDIA Corporation + + * Author: Laxman Dewangan <ldewangan@nvidia.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA. + * + */ + +#ifndef __LINUX_REGULATOR_MAX8973_H +#define __LINUX_REGULATOR_MAX8973_H + +/* + * Control flags for configuration of the device. + * Client need to pass this information with ORed + */ +#define MAX8973_CONTROL_REMOTE_SENSE_ENABLE 0x00000001 +#define MAX8973_CONTROL_FALLING_SLEW_RATE_ENABLE 0x00000002 +#define MAX8973_CONTROL_OUTPUT_ACTIVE_DISCH_ENABLE 0x00000004 +#define MAX8973_CONTROL_BIAS_ENABLE 0x00000008 +#define MAX8973_CONTROL_PULL_DOWN_ENABLE 0x00000010 +#define MAX8973_CONTROL_FREQ_SHIFT_9PER_ENABLE 0x00000020 + +#define MAX8973_CONTROL_CLKADV_TRIP_DISABLED 0x00000000 +#define MAX8973_CONTROL_CLKADV_TRIP_75mV_PER_US 0x00010000 +#define MAX8973_CONTROL_CLKADV_TRIP_150mV_PER_US 0x00020000 +#define MAX8973_CONTROL_CLKADV_TRIP_75mV_PER_US_HIST_DIS 0x00030000 + +#define MAX8973_CONTROL_INDUCTOR_VALUE_NOMINAL 0x00000000 +#define MAX8973_CONTROL_INDUCTOR_VALUE_MINUS_30_PER 0x00100000 +#define MAX8973_CONTROL_INDUCTOR_VALUE_PLUS_30_PER 0x00200000 +#define MAX8973_CONTROL_INDUCTOR_VALUE_PLUS_60_PER 0x00300000 + +/* + * struct max8973_regulator_platform_data - max8973 regulator platform data. + * + * @reg_init_data: The regulator init data. + * @control_flags: Control flags which are ORed value of above flags to + * configure device. + * @enable_ext_control: Enable the voltage enable/disable through external + * control signal from EN input pin. If it is false then + * voltage output will be enabled/disabled through EN bit of + * device register. + * @dvs_gpio: GPIO for dvs. It should be -1 if this is tied with fixed logic. + * @dvs_def_state: Default state of dvs. 1 if it is high else 0. + */ +struct max8973_regulator_platform_data { + struct regulator_init_data *reg_init_data; + unsigned long control_flags; + bool enable_ext_control; + int dvs_gpio; + unsigned dvs_def_state:1; +}; + +#endif /* __LINUX_REGULATOR_MAX8973_H */ diff --git a/include/linux/regulator/tps51632-regulator.h b/include/linux/regulator/tps51632-regulator.h new file mode 100644 index 000000000000..d00841e1a75a --- /dev/null +++ b/include/linux/regulator/tps51632-regulator.h @@ -0,0 +1,47 @@ +/* + * tps51632-regulator.h -- TPS51632 regulator + * + * Interface for regulator driver for TPS51632 3-2-1 Phase D-Cap Step Down + * Driverless Controller with serial VID control and DVFS. + * + * Copyright (C) 2012 NVIDIA Corporation + + * Author: Laxman Dewangan <ldewangan@nvidia.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA. + * + */ + +#ifndef __LINUX_REGULATOR_TPS51632_H +#define __LINUX_REGULATOR_TPS51632_H + +/* + * struct tps51632_regulator_platform_data - tps51632 regulator platform data. + * + * @reg_init_data: The regulator init data. + * @enable_pwm_dvfs: Enable PWM DVFS or not. + * @dvfs_step_20mV: Step for DVFS is 20mV or 10mV. + * @max_voltage_uV: Maximum possible voltage in PWM-DVFS mode. + * @base_voltage_uV: Base voltage when PWM-DVFS enabled. + */ +struct tps51632_regulator_platform_data { + struct regulator_init_data *reg_init_data; + bool enable_pwm_dvfs; + bool dvfs_step_20mV; + int max_voltage_uV; + int base_voltage_uV; +}; + +#endif /* __LINUX_REGULATOR_TPS51632_H */ diff --git a/include/linux/regulator/tps65090-regulator.h b/include/linux/regulator/tps65090-regulator.h deleted file mode 100644 index 0fa04b64db3e..000000000000 --- a/include/linux/regulator/tps65090-regulator.h +++ /dev/null @@ -1,50 +0,0 @@ -/* - * Regulator driver interface for TI TPS65090 PMIC family - * - * Copyright (c) 2012, NVIDIA CORPORATION. All rights reserved. - - * This program is free software; you can redistribute it and/or modify it - * under the terms and conditions of the GNU General Public License, - * version 2, as published by the Free Software Foundation. - - * This program is distributed in the hope it will be useful, but WITHOUT - * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or - * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for - * more details. - - * You should have received a copy of the GNU General Public License - * along with this program. If not, see <http://www.gnu.org/licenses/>. - */ - -#ifndef __REGULATOR_TPS65090_H -#define __REGULATOR_TPS65090_H - -#include <linux/regulator/machine.h> - -#define tps65090_rails(_name) "tps65090_"#_name - -enum { - TPS65090_ID_DCDC1, - TPS65090_ID_DCDC2, - TPS65090_ID_DCDC3, - TPS65090_ID_FET1, - TPS65090_ID_FET2, - TPS65090_ID_FET3, - TPS65090_ID_FET4, - TPS65090_ID_FET5, - TPS65090_ID_FET6, - TPS65090_ID_FET7, -}; - -/* - * struct tps65090_regulator_platform_data - * - * @regulator: The regulator init data. - * @slew_rate_uV_per_us: Slew rate microvolt per microsec. - */ - -struct tps65090_regulator_platform_data { - struct regulator_init_data regulator; -}; - -#endif /* __REGULATOR_TPS65090_H */ diff --git a/include/linux/res_counter.h b/include/linux/res_counter.h index 7d7fbe2ef782..6f54e40fa218 100644 --- a/include/linux/res_counter.h +++ b/include/linux/res_counter.h @@ -74,14 +74,9 @@ ssize_t res_counter_read(struct res_counter *counter, int member, const char __user *buf, size_t nbytes, loff_t *pos, int (*read_strategy)(unsigned long long val, char *s)); -typedef int (*write_strategy_fn)(const char *buf, unsigned long long *val); - int res_counter_memparse_write_strategy(const char *buf, unsigned long long *res); -int res_counter_write(struct res_counter *counter, int member, - const char *buffer, write_strategy_fn write_strategy); - /* * the field descriptors. one for each member of res_counter */ diff --git a/include/linux/ring_buffer.h b/include/linux/ring_buffer.h index 6c8835f74f79..519777e3fa01 100644 --- a/include/linux/ring_buffer.h +++ b/include/linux/ring_buffer.h @@ -159,13 +159,14 @@ int ring_buffer_record_is_on(struct ring_buffer *buffer); void ring_buffer_record_disable_cpu(struct ring_buffer *buffer, int cpu); void ring_buffer_record_enable_cpu(struct ring_buffer *buffer, int cpu); -unsigned long ring_buffer_oldest_event_ts(struct ring_buffer *buffer, int cpu); +u64 ring_buffer_oldest_event_ts(struct ring_buffer *buffer, int cpu); unsigned long ring_buffer_bytes_cpu(struct ring_buffer *buffer, int cpu); unsigned long ring_buffer_entries(struct ring_buffer *buffer); unsigned long ring_buffer_overruns(struct ring_buffer *buffer); unsigned long ring_buffer_entries_cpu(struct ring_buffer *buffer, int cpu); unsigned long ring_buffer_overrun_cpu(struct ring_buffer *buffer, int cpu); unsigned long ring_buffer_commit_overrun_cpu(struct ring_buffer *buffer, int cpu); +unsigned long ring_buffer_dropped_events_cpu(struct ring_buffer *buffer, int cpu); u64 ring_buffer_time_stamp(struct ring_buffer *buffer, int cpu); void ring_buffer_normalize_time_stamp(struct ring_buffer *buffer, diff --git a/include/linux/rtnetlink.h b/include/linux/rtnetlink.h index 7002bbfd5d4a..489dd7bb28ec 100644 --- a/include/linux/rtnetlink.h +++ b/include/linux/rtnetlink.h @@ -69,4 +69,7 @@ extern int ndo_dflt_fdb_dump(struct sk_buff *skb, struct netlink_callback *cb, struct net_device *dev, int idx); + +extern int ndo_dflt_bridge_getlink(struct sk_buff *skb, u32 pid, u32 seq, + struct net_device *dev, u16 mode); #endif /* __LINUX_RTNETLINK_H */ diff --git a/include/linux/sched.h b/include/linux/sched.h index 0dd42a02df2e..2c2f3072beef 100644 --- a/include/linux/sched.h +++ b/include/linux/sched.h @@ -107,8 +107,18 @@ extern unsigned long this_cpu_load(void); extern void calc_global_load(unsigned long ticks); extern void update_cpu_load_nohz(void); +/* Notifier for when a task gets migrated to a new CPU */ +struct task_migration_notifier { + struct task_struct *task; + int from_cpu; + int to_cpu; +}; +extern void register_task_migration_notifier(struct notifier_block *n); + extern unsigned long get_parent_ip(unsigned long addr); +extern void dump_cpu_task(int cpu); + struct seq_file; struct cfs_rq; struct task_group; @@ -434,13 +444,28 @@ struct cpu_itimer { }; /** + * struct cputime - snaphsot of system and user cputime + * @utime: time spent in user mode + * @stime: time spent in system mode + * + * Gathers a generic snapshot of user and system time. + */ +struct cputime { + cputime_t utime; + cputime_t stime; +}; + +/** * struct task_cputime - collected CPU time counts * @utime: time spent in user mode, in &cputime_t units * @stime: time spent in kernel mode, in &cputime_t units * @sum_exec_runtime: total time spent on the CPU, in nanoseconds * - * This structure groups together three kinds of CPU time that are - * tracked for threads and thread groups. Most things considering + * This is an extension of struct cputime that includes the total runtime + * spent by the task from the scheduler point of view. + * + * As a result, this structure groups together three kinds of CPU time + * that are tracked for threads and thread groups. Most things considering * CPU time want to group these counts together and treat all three * of them in parallel. */ @@ -581,7 +606,7 @@ struct signal_struct { cputime_t gtime; cputime_t cgtime; #ifndef CONFIG_VIRT_CPU_ACCOUNTING - cputime_t prev_utime, prev_stime; + struct cputime prev_cputime; #endif unsigned long nvcsw, nivcsw, cnvcsw, cnivcsw; unsigned long min_flt, maj_flt, cmin_flt, cmaj_flt; @@ -631,9 +656,10 @@ struct signal_struct { struct rw_semaphore group_rwsem; #endif - int oom_score_adj; /* OOM kill score adjustment */ - int oom_score_adj_min; /* OOM kill score adjustment minimum value. - * Only settable by CAP_SYS_RESOURCE. */ + oom_flags_t oom_flags; + short oom_score_adj; /* OOM kill score adjustment */ + short oom_score_adj_min; /* OOM kill score adjustment min value. + * Only settable by CAP_SYS_RESOURCE. */ struct mutex cred_guard_mutex; /* guard against foreign influences on * credential calculations @@ -1061,6 +1087,7 @@ struct sched_class { #ifdef CONFIG_SMP int (*select_task_rq)(struct task_struct *p, int sd_flag, int flags); + void (*migrate_task_rq)(struct task_struct *p, int next_cpu); void (*pre_schedule) (struct rq *this_rq, struct task_struct *task); void (*post_schedule) (struct rq *this_rq); @@ -1095,6 +1122,18 @@ struct load_weight { unsigned long weight, inv_weight; }; +struct sched_avg { + /* + * These sums represent an infinite geometric series and so are bound + * above by 1024/(1-y). Thus we only need a u32 to store them for for all + * choices of y < 1-2^(-32)*1024. + */ + u32 runnable_avg_sum, runnable_avg_period; + u64 last_runnable_update; + s64 decay_count; + unsigned long load_avg_contrib; +}; + #ifdef CONFIG_SCHEDSTATS struct sched_statistics { u64 wait_start; @@ -1155,6 +1194,15 @@ struct sched_entity { /* rq "owned" by this entity/group: */ struct cfs_rq *my_q; #endif +/* + * Load-tracking only depends on SMP, FAIR_GROUP_SCHED dependency below may be + * removed when useful for applications beyond shares distribution (e.g. + * load-balance). + */ +#if defined(CONFIG_SMP) && defined(CONFIG_FAIR_GROUP_SCHED) + /* Per-entity load-tracking */ + struct sched_avg avg; +#endif }; struct sched_rt_entity { @@ -1318,7 +1366,7 @@ struct task_struct { cputime_t utime, stime, utimescaled, stimescaled; cputime_t gtime; #ifndef CONFIG_VIRT_CPU_ACCOUNTING - cputime_t prev_utime, prev_stime; + struct cputime prev_cputime; #endif unsigned long nvcsw, nivcsw; /* context switch counts */ struct timespec start_time; /* monotonic time */ @@ -1729,8 +1777,8 @@ static inline void put_task_struct(struct task_struct *t) __put_task_struct(t); } -extern void task_times(struct task_struct *p, cputime_t *ut, cputime_t *st); -extern void thread_group_times(struct task_struct *p, cputime_t *ut, cputime_t *st); +extern void task_cputime_adjusted(struct task_struct *p, cputime_t *ut, cputime_t *st); +extern void thread_group_cputime_adjusted(struct task_struct *p, cputime_t *ut, cputime_t *st); /* * Per process flags @@ -1844,14 +1892,6 @@ static inline void rcu_copy_process(struct task_struct *p) #endif -static inline void rcu_switch(struct task_struct *prev, - struct task_struct *next) -{ -#ifdef CONFIG_RCU_USER_QS - rcu_user_hooks_switch(prev, next); -#endif -} - static inline void tsk_restore_flags(struct task_struct *task, unsigned long orig_flags, unsigned long flags) { @@ -2271,7 +2311,7 @@ extern void mm_release(struct task_struct *, struct mm_struct *); extern struct mm_struct *dup_mm(struct task_struct *tsk); extern int copy_thread(unsigned long, unsigned long, unsigned long, - struct task_struct *, struct pt_regs *); + struct task_struct *); extern void flush_thread(void); extern void exit_thread(void); @@ -2283,14 +2323,13 @@ extern void flush_itimer_signals(void); extern void do_group_exit(int); -extern void daemonize(const char *, ...); extern int allow_signal(int); extern int disallow_signal(int); extern int do_execve(const char *, const char __user * const __user *, - const char __user * const __user *, struct pt_regs *); -extern long do_fork(unsigned long, unsigned long, struct pt_regs *, unsigned long, int __user *, int __user *); + const char __user * const __user *); +extern long do_fork(unsigned long, unsigned long, unsigned long, int __user *, int __user *); struct task_struct *fork_idle(int); #ifdef CONFIG_GENERIC_KERNEL_THREAD extern pid_t kernel_thread(int (*fn)(void *), void *arg, unsigned long flags); diff --git a/include/linux/serial_8250.h b/include/linux/serial_8250.h index c174c90fb3fb..c490d20b3fb8 100644 --- a/include/linux/serial_8250.h +++ b/include/linux/serial_8250.h @@ -105,6 +105,8 @@ extern int early_serial_setup(struct uart_port *port); extern int serial8250_find_port(struct uart_port *p); extern int serial8250_find_port_for_earlycon(void); +extern unsigned int serial8250_early_in(struct uart_port *port, int offset); +extern void serial8250_early_out(struct uart_port *port, int offset, int value); extern int setup_early_serial8250_console(char *cmdline); extern void serial8250_do_set_termios(struct uart_port *port, struct ktermios *termios, struct ktermios *old); diff --git a/include/linux/serial_core.h b/include/linux/serial_core.h index 3c430228d232..c6690a2a27fb 100644 --- a/include/linux/serial_core.h +++ b/include/linux/serial_core.h @@ -46,6 +46,8 @@ struct uart_ops { unsigned int (*get_mctrl)(struct uart_port *); void (*stop_tx)(struct uart_port *); void (*start_tx)(struct uart_port *); + void (*throttle)(struct uart_port *); + void (*unthrottle)(struct uart_port *); void (*send_xchar)(struct uart_port *, char ch); void (*stop_rx)(struct uart_port *); void (*enable_ms)(struct uart_port *); @@ -163,6 +165,10 @@ struct uart_port { #define UPF_BUGGY_UART ((__force upf_t) (1 << 14)) #define UPF_NO_TXEN_TEST ((__force upf_t) (1 << 15)) #define UPF_MAGIC_MULTIPLIER ((__force upf_t) (1 << 16)) +/* Port has hardware-assisted h/w flow control (iow, auto-RTS *not* auto-CTS) */ +#define UPF_HARD_FLOW ((__force upf_t) (1 << 21)) +/* Port has hardware-assisted s/w flow control */ +#define UPF_SOFT_FLOW ((__force upf_t) (1 << 22)) #define UPF_CONS_FLOW ((__force upf_t) (1 << 23)) #define UPF_SHARE_IRQ ((__force upf_t) (1 << 24)) #define UPF_EXAR_EFR ((__force upf_t) (1 << 25)) diff --git a/include/linux/sh_clk.h b/include/linux/sh_clk.h index 50910913b268..60c72395ec6b 100644 --- a/include/linux/sh_clk.h +++ b/include/linux/sh_clk.h @@ -199,4 +199,13 @@ int sh_clk_div6_reparent_register(struct clk *clks, int nr); #define CLKDEV_DEV_ID(_id, _clk) { .dev_id = _id, .clk = _clk } #define CLKDEV_ICK_ID(_cid, _did, _clk) { .con_id = _cid, .dev_id = _did, .clk = _clk } +/* .enable_reg will be updated to .mapping on sh_clk_fsidiv_register() */ +#define SH_CLK_FSIDIV(_reg, _parent) \ +{ \ + .enable_reg = (void __iomem *)_reg, \ + .parent = _parent, \ +} + +int sh_clk_fsidiv_register(struct clk *clks, int nr); + #endif /* __SH_CLOCK_H */ diff --git a/include/linux/shm.h b/include/linux/shm.h index bcf8a6a3ec00..429c1995d756 100644 --- a/include/linux/shm.h +++ b/include/linux/shm.h @@ -29,6 +29,21 @@ struct shmid_kernel /* private to the kernel */ #define SHM_HUGETLB 04000 /* segment will use huge TLB pages */ #define SHM_NORESERVE 010000 /* don't check for reservations */ +/* Bits [26:31] are reserved */ + +/* + * When SHM_HUGETLB is set bits [26:31] encode the log2 of the huge page size. + * This gives us 6 bits, which is enough until someone invents 128 bit address + * spaces. + * + * Assume these are all power of twos. + * When 0 use the default page size. + */ +#define SHM_HUGE_SHIFT 26 +#define SHM_HUGE_MASK 0x3f +#define SHM_HUGE_2MB (21 << SHM_HUGE_SHIFT) +#define SHM_HUGE_1GB (30 << SHM_HUGE_SHIFT) + #ifdef CONFIG_SYSVIPC long do_shmat(int shmid, char __user *shmaddr, int shmflg, unsigned long *addr, unsigned long shmlba); diff --git a/include/linux/skbuff.h b/include/linux/skbuff.h index 6a2c34e6d962..320e976d5ab8 100644 --- a/include/linux/skbuff.h +++ b/include/linux/skbuff.h @@ -235,11 +235,13 @@ enum { /* * The callback notifies userspace to release buffers when skb DMA is done in * lower device, the skb last reference should be 0 when calling this. + * The zerocopy_success argument is true if zero copy transmit occurred, + * false on data copy or out of memory error caused by data copy attempt. * The ctx field is used to track device context. * The desc field is used to track userspace buffer index. */ struct ubuf_info { - void (*callback)(struct ubuf_info *); + void (*callback)(struct ubuf_info *, bool zerocopy_success); void *ctx; unsigned long desc; }; @@ -374,6 +376,8 @@ typedef unsigned char *sk_buff_data_t; * @mark: Generic packet mark * @dropcount: total number of sk_receive_queue overflows * @vlan_tci: vlan tag control information + * @inner_transport_header: Inner transport layer header (encapsulation) + * @inner_network_header: Network layer header (encapsulation) * @transport_header: Transport layer header * @network_header: Network layer header * @mac_header: Link layer header @@ -469,7 +473,13 @@ struct sk_buff { __u8 wifi_acked:1; __u8 no_fcs:1; __u8 head_frag:1; - /* 8/10 bit hole (depending on ndisc_nodetype presence) */ + /* Encapsulation protocol and NIC drivers should use + * this flag to indicate to each other if the skb contains + * encapsulated packet or not and maybe use the inner packet + * headers if needed + */ + __u8 encapsulation:1; + /* 7/9 bit hole (depending on ndisc_nodetype presence) */ kmemcheck_bitfield_end(flags2); #ifdef CONFIG_NET_DMA @@ -484,6 +494,8 @@ struct sk_buff { __u32 avail_size; }; + sk_buff_data_t inner_transport_header; + sk_buff_data_t inner_network_header; sk_buff_data_t transport_header; sk_buff_data_t network_header; sk_buff_data_t mac_header; @@ -566,6 +578,7 @@ static inline struct rtable *skb_rtable(const struct sk_buff *skb) } extern void kfree_skb(struct sk_buff *skb); +extern void skb_tx_error(struct sk_buff *skb); extern void consume_skb(struct sk_buff *skb); extern void __kfree_skb(struct sk_buff *skb); extern struct kmem_cache *skbuff_head_cache; @@ -643,7 +656,7 @@ extern unsigned int skb_find_text(struct sk_buff *skb, unsigned int from, extern void __skb_get_rxhash(struct sk_buff *skb); static inline __u32 skb_get_rxhash(struct sk_buff *skb) { - if (!skb->rxhash) + if (!skb->l4_rxhash) __skb_get_rxhash(skb); return skb->rxhash; @@ -1432,12 +1445,53 @@ static inline void skb_reserve(struct sk_buff *skb, int len) skb->tail += len; } +static inline void skb_reset_inner_headers(struct sk_buff *skb) +{ + skb->inner_network_header = skb->network_header; + skb->inner_transport_header = skb->transport_header; +} + static inline void skb_reset_mac_len(struct sk_buff *skb) { skb->mac_len = skb->network_header - skb->mac_header; } #ifdef NET_SKBUFF_DATA_USES_OFFSET +static inline unsigned char *skb_inner_transport_header(const struct sk_buff + *skb) +{ + return skb->head + skb->inner_transport_header; +} + +static inline void skb_reset_inner_transport_header(struct sk_buff *skb) +{ + skb->inner_transport_header = skb->data - skb->head; +} + +static inline void skb_set_inner_transport_header(struct sk_buff *skb, + const int offset) +{ + skb_reset_inner_transport_header(skb); + skb->inner_transport_header += offset; +} + +static inline unsigned char *skb_inner_network_header(const struct sk_buff *skb) +{ + return skb->head + skb->inner_network_header; +} + +static inline void skb_reset_inner_network_header(struct sk_buff *skb) +{ + skb->inner_network_header = skb->data - skb->head; +} + +static inline void skb_set_inner_network_header(struct sk_buff *skb, + const int offset) +{ + skb_reset_inner_network_header(skb); + skb->inner_network_header += offset; +} + static inline unsigned char *skb_transport_header(const struct sk_buff *skb) { return skb->head + skb->transport_header; @@ -1493,6 +1547,38 @@ static inline void skb_set_mac_header(struct sk_buff *skb, const int offset) } #else /* NET_SKBUFF_DATA_USES_OFFSET */ +static inline unsigned char *skb_inner_transport_header(const struct sk_buff + *skb) +{ + return skb->inner_transport_header; +} + +static inline void skb_reset_inner_transport_header(struct sk_buff *skb) +{ + skb->inner_transport_header = skb->data; +} + +static inline void skb_set_inner_transport_header(struct sk_buff *skb, + const int offset) +{ + skb->inner_transport_header = skb->data + offset; +} + +static inline unsigned char *skb_inner_network_header(const struct sk_buff *skb) +{ + return skb->inner_network_header; +} + +static inline void skb_reset_inner_network_header(struct sk_buff *skb) +{ + skb->inner_network_header = skb->data; +} + +static inline void skb_set_inner_network_header(struct sk_buff *skb, + const int offset) +{ + skb->inner_network_header = skb->data + offset; +} static inline unsigned char *skb_transport_header(const struct sk_buff *skb) { @@ -1571,11 +1657,21 @@ static inline u32 skb_network_header_len(const struct sk_buff *skb) return skb->transport_header - skb->network_header; } +static inline u32 skb_inner_network_header_len(const struct sk_buff *skb) +{ + return skb->inner_transport_header - skb->inner_network_header; +} + static inline int skb_network_offset(const struct sk_buff *skb) { return skb_network_header(skb) - skb->data; } +static inline int skb_inner_network_offset(const struct sk_buff *skb) +{ + return skb_inner_network_header(skb) - skb->data; +} + static inline int pskb_network_may_pull(struct sk_buff *skb, unsigned int len) { return pskb_may_pull(skb, skb_network_offset(skb) + len); diff --git a/include/linux/smscphy.h b/include/linux/smscphy.h index ce718cbce435..f4bf16e16e16 100644 --- a/include/linux/smscphy.h +++ b/include/linux/smscphy.h @@ -4,6 +4,7 @@ #define MII_LAN83C185_ISF 29 /* Interrupt Source Flags */ #define MII_LAN83C185_IM 30 /* Interrupt Mask */ #define MII_LAN83C185_CTRL_STATUS 17 /* Mode/Status Register */ +#define MII_LAN83C185_SPECIAL_MODES 18 /* Special Modes Register */ #define MII_LAN83C185_ISF_INT1 (1<<1) /* Auto-Negotiation Page Received */ #define MII_LAN83C185_ISF_INT2 (1<<2) /* Parallel Detection Fault */ @@ -22,4 +23,8 @@ #define MII_LAN83C185_EDPWRDOWN (1 << 13) /* EDPWRDOWN */ #define MII_LAN83C185_ENERGYON (1 << 1) /* ENERGYON */ +#define MII_LAN83C185_MODE_MASK 0xE0 +#define MII_LAN83C185_MODE_POWERDOWN 0xC0 /* Power Down mode */ +#define MII_LAN83C185_MODE_ALL 0xE0 /* All capable mode */ + #endif /* __LINUX_SMSCPHY_H__ */ diff --git a/include/linux/spi/spi-tegra.h b/include/linux/spi/spi-tegra.h new file mode 100644 index 000000000000..786932c62edb --- /dev/null +++ b/include/linux/spi/spi-tegra.h @@ -0,0 +1,40 @@ +/* + * spi-tegra.h: SPI interface for Nvidia Tegra20 SLINK controller. + * + * Copyright (C) 2011 NVIDIA Corporation + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA. + */ + +#ifndef _LINUX_SPI_TEGRA_H +#define _LINUX_SPI_TEGRA_H + +struct tegra_spi_platform_data { + int dma_req_sel; + unsigned int spi_max_frequency; +}; + +/* + * Controller data from device to pass some info like + * hw based chip select can be used or not and if yes + * then CS hold and setup time. + */ +struct tegra_spi_device_controller_data { + bool is_hw_based_cs; + int cs_setup_clk_count; + int cs_hold_clk_count; +}; + +#endif /* _LINUX_SPI_TEGRA_H */ diff --git a/include/linux/spi/spi.h b/include/linux/spi/spi.h index fa702aeb5038..f62918946d86 100644 --- a/include/linux/spi/spi.h +++ b/include/linux/spi/spi.h @@ -90,6 +90,7 @@ struct spi_device { void *controller_state; void *controller_data; char modalias[SPI_NAME_SIZE]; + int cs_gpio; /* chip select gpio */ /* * likely need more hooks for more protocol options affecting how @@ -362,6 +363,8 @@ struct spi_master { int (*transfer_one_message)(struct spi_master *master, struct spi_message *mesg); int (*unprepare_transfer_hardware)(struct spi_master *master); + /* gpio chip select */ + int *cs_gpios; }; static inline void *spi_master_get_devdata(struct spi_master *master) diff --git a/include/linux/srcu.h b/include/linux/srcu.h index 55a5c52cbb25..6eb691b08358 100644 --- a/include/linux/srcu.h +++ b/include/linux/srcu.h @@ -16,8 +16,10 @@ * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. * * Copyright (C) IBM Corporation, 2006 + * Copyright (C) Fujitsu, 2012 * * Author: Paul McKenney <paulmck@us.ibm.com> + * Lai Jiangshan <laijs@cn.fujitsu.com> * * For detailed explanation of Read-Copy Update mechanism see - * Documentation/RCU/ *.txt @@ -40,6 +42,8 @@ struct rcu_batch { struct rcu_head *head, **tail; }; +#define RCU_BATCH_INIT(name) { NULL, &(name.head) } + struct srcu_struct { unsigned completed; struct srcu_struct_array __percpu *per_cpu_ref; @@ -70,12 +74,42 @@ int __init_srcu_struct(struct srcu_struct *sp, const char *name, __init_srcu_struct((sp), #sp, &__srcu_key); \ }) +#define __SRCU_DEP_MAP_INIT(srcu_name) .dep_map = { .name = #srcu_name }, #else /* #ifdef CONFIG_DEBUG_LOCK_ALLOC */ int init_srcu_struct(struct srcu_struct *sp); +#define __SRCU_DEP_MAP_INIT(srcu_name) #endif /* #else #ifdef CONFIG_DEBUG_LOCK_ALLOC */ +void process_srcu(struct work_struct *work); + +#define __SRCU_STRUCT_INIT(name) \ + { \ + .completed = -300, \ + .per_cpu_ref = &name##_srcu_array, \ + .queue_lock = __SPIN_LOCK_UNLOCKED(name.queue_lock), \ + .running = false, \ + .batch_queue = RCU_BATCH_INIT(name.batch_queue), \ + .batch_check0 = RCU_BATCH_INIT(name.batch_check0), \ + .batch_check1 = RCU_BATCH_INIT(name.batch_check1), \ + .batch_done = RCU_BATCH_INIT(name.batch_done), \ + .work = __DELAYED_WORK_INITIALIZER(name.work, process_srcu, 0),\ + __SRCU_DEP_MAP_INIT(name) \ + } + +/* + * define and init a srcu struct at build time. + * dont't call init_srcu_struct() nor cleanup_srcu_struct() on it. + */ +#define DEFINE_SRCU(name) \ + static DEFINE_PER_CPU(struct srcu_struct_array, name##_srcu_array);\ + struct srcu_struct name = __SRCU_STRUCT_INIT(name); + +#define DEFINE_STATIC_SRCU(name) \ + static DEFINE_PER_CPU(struct srcu_struct_array, name##_srcu_array);\ + static struct srcu_struct name = __SRCU_STRUCT_INIT(name); + /** * call_srcu() - Queue a callback for invocation after an SRCU grace period * @sp: srcu_struct in queue the callback diff --git a/include/linux/ssb/ssb.h b/include/linux/ssb/ssb.h index bb674c02f306..22958d68ecfe 100644 --- a/include/linux/ssb/ssb.h +++ b/include/linux/ssb/ssb.h @@ -6,8 +6,10 @@ #include <linux/types.h> #include <linux/spinlock.h> #include <linux/pci.h> +#include <linux/gpio.h> #include <linux/mod_devicetable.h> #include <linux/dma-mapping.h> +#include <linux/platform_device.h> #include <linux/ssb/ssb_regs.h> @@ -432,7 +434,11 @@ struct ssb_bus { #ifdef CONFIG_SSB_EMBEDDED /* Lock for GPIO register access. */ spinlock_t gpio_lock; + struct platform_device *watchdog; #endif /* EMBEDDED */ +#ifdef CONFIG_SSB_DRIVER_GPIO + struct gpio_chip gpio; +#endif /* DRIVER_GPIO */ /* Internal-only stuff follows. Do not touch. */ struct list_head list; diff --git a/include/linux/ssb/ssb_driver_chipcommon.h b/include/linux/ssb/ssb_driver_chipcommon.h index c2b02a5c86ae..9e492be5244b 100644 --- a/include/linux/ssb/ssb_driver_chipcommon.h +++ b/include/linux/ssb/ssb_driver_chipcommon.h @@ -590,7 +590,10 @@ struct ssb_chipcommon { u32 status; /* Fast Powerup Delay constant */ u16 fast_pwrup_delay; + spinlock_t gpio_lock; struct ssb_chipcommon_pmu pmu; + u32 ticks_per_ms; + u32 max_timer_ms; }; static inline bool ssb_chipco_available(struct ssb_chipcommon *cc) @@ -630,8 +633,7 @@ enum ssb_clkmode { extern void ssb_chipco_set_clockmode(struct ssb_chipcommon *cc, enum ssb_clkmode mode); -extern void ssb_chipco_watchdog_timer_set(struct ssb_chipcommon *cc, - u32 ticks); +extern u32 ssb_chipco_watchdog_timer_set(struct ssb_chipcommon *cc, u32 ticks); void ssb_chipco_irq_mask(struct ssb_chipcommon *cc, u32 mask, u32 value); @@ -644,6 +646,8 @@ u32 ssb_chipco_gpio_outen(struct ssb_chipcommon *cc, u32 mask, u32 value); u32 ssb_chipco_gpio_control(struct ssb_chipcommon *cc, u32 mask, u32 value); u32 ssb_chipco_gpio_intmask(struct ssb_chipcommon *cc, u32 mask, u32 value); u32 ssb_chipco_gpio_polarity(struct ssb_chipcommon *cc, u32 mask, u32 value); +u32 ssb_chipco_gpio_pullup(struct ssb_chipcommon *cc, u32 mask, u32 value); +u32 ssb_chipco_gpio_pulldown(struct ssb_chipcommon *cc, u32 mask, u32 value); #ifdef CONFIG_SSB_SERIAL extern int ssb_chipco_serial_init(struct ssb_chipcommon *cc, diff --git a/include/linux/ssb/ssb_driver_extif.h b/include/linux/ssb/ssb_driver_extif.h index 91161f0aa22b..a410e841eb91 100644 --- a/include/linux/ssb/ssb_driver_extif.h +++ b/include/linux/ssb/ssb_driver_extif.h @@ -152,12 +152,16 @@ /* watchdog */ #define SSB_EXTIF_WATCHDOG_CLK 48000000 /* Hz */ +#define SSB_EXTIF_WATCHDOG_MAX_TIMER ((1 << 28) - 1) +#define SSB_EXTIF_WATCHDOG_MAX_TIMER_MS (SSB_EXTIF_WATCHDOG_MAX_TIMER \ + / (SSB_EXTIF_WATCHDOG_CLK / 1000)) #ifdef CONFIG_SSB_DRIVER_EXTIF struct ssb_extif { struct ssb_device *dev; + spinlock_t gpio_lock; }; static inline bool ssb_extif_available(struct ssb_extif *extif) @@ -171,8 +175,7 @@ extern void ssb_extif_get_clockcontrol(struct ssb_extif *extif, extern void ssb_extif_timing_init(struct ssb_extif *extif, unsigned long ns); -extern void ssb_extif_watchdog_timer_set(struct ssb_extif *extif, - u32 ticks); +extern u32 ssb_extif_watchdog_timer_set(struct ssb_extif *extif, u32 ticks); /* Extif GPIO pin access */ u32 ssb_extif_gpio_in(struct ssb_extif *extif, u32 mask); @@ -205,10 +208,52 @@ void ssb_extif_get_clockcontrol(struct ssb_extif *extif, } static inline -void ssb_extif_watchdog_timer_set(struct ssb_extif *extif, - u32 ticks) +void ssb_extif_timing_init(struct ssb_extif *extif, unsigned long ns) { } +static inline +u32 ssb_extif_watchdog_timer_set(struct ssb_extif *extif, u32 ticks) +{ + return 0; +} + +static inline u32 ssb_extif_gpio_in(struct ssb_extif *extif, u32 mask) +{ + return 0; +} + +static inline u32 ssb_extif_gpio_out(struct ssb_extif *extif, u32 mask, + u32 value) +{ + return 0; +} + +static inline u32 ssb_extif_gpio_outen(struct ssb_extif *extif, u32 mask, + u32 value) +{ + return 0; +} + +static inline u32 ssb_extif_gpio_polarity(struct ssb_extif *extif, u32 mask, + u32 value) +{ + return 0; +} + +static inline u32 ssb_extif_gpio_intmask(struct ssb_extif *extif, u32 mask, + u32 value) +{ + return 0; +} + +#ifdef CONFIG_SSB_SERIAL +static inline int ssb_extif_serial_init(struct ssb_extif *extif, + struct ssb_serial_port *ports) +{ + return 0; +} +#endif /* CONFIG_SSB_SERIAL */ + #endif /* CONFIG_SSB_DRIVER_EXTIF */ #endif /* LINUX_SSB_EXTIFCORE_H_ */ diff --git a/include/linux/ssb/ssb_driver_mips.h b/include/linux/ssb/ssb_driver_mips.h index 5f44e9740cd2..07a9c7a2e088 100644 --- a/include/linux/ssb/ssb_driver_mips.h +++ b/include/linux/ssb/ssb_driver_mips.h @@ -13,6 +13,12 @@ struct ssb_serial_port { unsigned int reg_shift; }; +struct ssb_pflash { + bool present; + u8 buswidth; + u32 window; + u32 window_size; +}; struct ssb_mipscore { struct ssb_device *dev; @@ -20,9 +26,7 @@ struct ssb_mipscore { int nr_serial_ports; struct ssb_serial_port serial_ports[4]; - u8 flash_buswidth; - u32 flash_window; - u32 flash_window_size; + struct ssb_pflash pflash; }; extern void ssb_mipscore_init(struct ssb_mipscore *mcore); diff --git a/include/linux/ssb/ssb_regs.h b/include/linux/ssb/ssb_regs.h index a0525019e1d1..6ecfa02ddbac 100644 --- a/include/linux/ssb/ssb_regs.h +++ b/include/linux/ssb/ssb_regs.h @@ -485,7 +485,7 @@ #define SSB_SPROM8_HWIQ_IQSWP_IQCAL_SWP_SHIFT 4 #define SSB_SPROM8_HWIQ_IQSWP_HW_IQCAL 0x0020 #define SSB_SPROM8_HWIQ_IQSWP_HW_IQCAL_SHIFT 5 -#define SSB_SPROM8_TEMPDELTA 0x00BA +#define SSB_SPROM8_TEMPDELTA 0x00BC #define SSB_SPROM8_TEMPDELTA_PHYCAL 0x00ff #define SSB_SPROM8_TEMPDELTA_PHYCAL_SHIFT 0 #define SSB_SPROM8_TEMPDELTA_PERIOD 0x0f00 diff --git a/include/linux/stmmac.h b/include/linux/stmmac.h index a1547ea3920d..c1b3ed3fb787 100644 --- a/include/linux/stmmac.h +++ b/include/linux/stmmac.h @@ -61,7 +61,7 @@ #define STMMAC_CSR_I_16 0xE /* clk_csr_i/16 */ #define STMMAC_CSR_I_18 0xF /* clk_csr_i/18 */ -/* AXI DMA Burst length suported */ +/* AXI DMA Burst length supported */ #define DMA_AXI_BLEN_4 (1 << 1) #define DMA_AXI_BLEN_8 (1 << 2) #define DMA_AXI_BLEN_16 (1 << 3) @@ -104,6 +104,7 @@ struct plat_stmmacenet_data { int bugged_jumbo; int pmt; int force_sf_dma_mode; + int riwt_off; void (*fix_mac_speed)(void *priv, unsigned int speed); void (*bus_setup)(void __iomem *ioaddr); int (*init)(struct platform_device *pdev); diff --git a/include/linux/sunxi_timer.h b/include/linux/sunxi_timer.h new file mode 100644 index 000000000000..b9165bba6e61 --- /dev/null +++ b/include/linux/sunxi_timer.h @@ -0,0 +1,24 @@ +/* + * Copyright 2012 Maxime Ripard + * + * Maxime Ripard <maxime.ripard@free-electrons.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#ifndef __SUNXI_TIMER_H +#define __SUNXI_TIMER_H + +#include <asm/mach/time.h> + +extern struct sys_timer sunxi_timer; + +#endif diff --git a/include/linux/syscalls.h b/include/linux/syscalls.h index 727f0cd73921..91835e7f364d 100644 --- a/include/linux/syscalls.h +++ b/include/linux/syscalls.h @@ -833,10 +833,22 @@ int kernel_execve(const char *filename, const char *const argv[], const char *co #define kernel_execve(filename, argv, envp) \ do_execve(filename, \ (const char __user *const __user *)argv, \ - (const char __user *const __user *)envp, \ - current_pt_regs()) + (const char __user *const __user *)envp) #endif +asmlinkage long sys_fork(void); +asmlinkage long sys_vfork(void); +#ifdef CONFIG_CLONE_BACKWARDS +asmlinkage long sys_clone(unsigned long, unsigned long, int __user *, int, + int __user *); +#else +asmlinkage long sys_clone(unsigned long, unsigned long, int __user *, + int __user *, int); +#endif + +asmlinkage long sys_execve(const char __user *filename, + const char __user *const __user *argv, + const char __user *const __user *envp); asmlinkage long sys_perf_event_open( struct perf_event_attr __user *attr_uptr, diff --git a/include/linux/sysctl.h b/include/linux/sysctl.h index cd844a6a8d5f..14a8ff2de11e 100644 --- a/include/linux/sysctl.h +++ b/include/linux/sysctl.h @@ -158,8 +158,7 @@ struct ctl_table_root { struct ctl_table_set default_set; struct ctl_table_set *(*lookup)(struct ctl_table_root *root, struct nsproxy *namespaces); - int (*permissions)(struct ctl_table_root *root, - struct nsproxy *namespaces, struct ctl_table *table); + int (*permissions)(struct ctl_table_header *head, struct ctl_table *table); }; /* struct ctl_path describes where in the hierarchy a table is added */ diff --git a/include/linux/tcp.h b/include/linux/tcp.h index 60b7aac15e0e..4e1d2283e3cc 100644 --- a/include/linux/tcp.h +++ b/include/linux/tcp.h @@ -35,6 +35,16 @@ static inline unsigned int tcp_hdrlen(const struct sk_buff *skb) return tcp_hdr(skb)->doff * 4; } +static inline struct tcphdr *inner_tcp_hdr(const struct sk_buff *skb) +{ + return (struct tcphdr *)skb_inner_transport_header(skb); +} + +static inline unsigned int inner_tcp_hdrlen(const struct sk_buff *skb) +{ + return inner_tcp_hdr(skb)->doff * 4; +} + static inline unsigned int tcp_optlen(const struct sk_buff *skb) { return (tcp_hdr(skb)->doff - 5) * 4; diff --git a/include/linux/tegra-ahb.h b/include/linux/tegra-ahb.h new file mode 100644 index 000000000000..f1cd075ceee1 --- /dev/null +++ b/include/linux/tegra-ahb.h @@ -0,0 +1,19 @@ +/* + * Copyright (c) 2012, NVIDIA CORPORATION. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms and conditions of the GNU General Public License, + * version 2, as published by the Free Software Foundation. + * + * This program is distributed in the hope it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + */ + +#ifndef __LINUX_AHB_H__ +#define __LINUX_AHB_H__ + +extern int tegra_ahb_enable_smmu(struct device_node *ahb); + +#endif /* __LINUX_AHB_H__ */ diff --git a/include/linux/thermal.h b/include/linux/thermal.h index 91b34812cd84..fe82022478e7 100644 --- a/include/linux/thermal.h +++ b/include/linux/thermal.h @@ -29,6 +29,32 @@ #include <linux/device.h> #include <linux/workqueue.h> +#define THERMAL_TRIPS_NONE -1 +#define THERMAL_MAX_TRIPS 12 +#define THERMAL_NAME_LENGTH 20 + +/* No upper/lower limit requirement */ +#define THERMAL_NO_LIMIT -1UL + +/* Unit conversion macros */ +#define KELVIN_TO_CELSIUS(t) (long)(((long)t-2732 >= 0) ? \ + ((long)t-2732+5)/10 : ((long)t-2732-5)/10) +#define CELSIUS_TO_KELVIN(t) ((t)*10+2732) + +/* Adding event notification support elements */ +#define THERMAL_GENL_FAMILY_NAME "thermal_event" +#define THERMAL_GENL_VERSION 0x01 +#define THERMAL_GENL_MCAST_GROUP_NAME "thermal_mc_group" + +/* Default Thermal Governor */ +#if defined(CONFIG_THERMAL_DEFAULT_GOV_STEP_WISE) +#define DEFAULT_THERMAL_GOVERNOR "step_wise" +#elif defined(CONFIG_THERMAL_DEFAULT_GOV_FAIR_SHARE) +#define DEFAULT_THERMAL_GOVERNOR "fair_share" +#elif defined(CONFIG_THERMAL_DEFAULT_GOV_USER_SPACE) +#define DEFAULT_THERMAL_GOVERNOR "user_space" +#endif + struct thermal_zone_device; struct thermal_cooling_device; @@ -50,6 +76,30 @@ enum thermal_trend { THERMAL_TREND_DROPPING, /* temperature is dropping */ }; +/* Events supported by Thermal Netlink */ +enum events { + THERMAL_AUX0, + THERMAL_AUX1, + THERMAL_CRITICAL, + THERMAL_DEV_FAULT, +}; + +/* attributes of thermal_genl_family */ +enum { + THERMAL_GENL_ATTR_UNSPEC, + THERMAL_GENL_ATTR_EVENT, + __THERMAL_GENL_ATTR_MAX, +}; +#define THERMAL_GENL_ATTR_MAX (__THERMAL_GENL_ATTR_MAX - 1) + +/* commands supported by the thermal_genl_family */ +enum { + THERMAL_GENL_CMD_UNSPEC, + THERMAL_GENL_CMD_EVENT, + __THERMAL_GENL_CMD_MAX, +}; +#define THERMAL_GENL_CMD_MAX (__THERMAL_GENL_CMD_MAX - 1) + struct thermal_zone_device_ops { int (*bind) (struct thermal_zone_device *, struct thermal_cooling_device *); @@ -83,11 +133,6 @@ struct thermal_cooling_device_ops { int (*set_cur_state) (struct thermal_cooling_device *, unsigned long); }; -#define THERMAL_NO_LIMIT -1UL /* no upper/lower limit requirement */ - -#define THERMAL_TRIPS_NONE -1 -#define THERMAL_MAX_TRIPS 12 -#define THERMAL_NAME_LENGTH 20 struct thermal_cooling_device { int id; char type[THERMAL_NAME_LENGTH]; @@ -100,10 +145,6 @@ struct thermal_cooling_device { struct list_head node; }; -#define KELVIN_TO_CELSIUS(t) (long)(((long)t-2732 >= 0) ? \ - ((long)t-2732+5)/10 : ((long)t-2732-5)/10) -#define CELSIUS_TO_KELVIN(t) ((t)*10+2732) - struct thermal_attr { struct device_attribute attr; char name[THERMAL_NAME_LENGTH]; @@ -125,46 +166,61 @@ struct thermal_zone_device { int passive; unsigned int forced_passive; const struct thermal_zone_device_ops *ops; + const struct thermal_zone_params *tzp; + struct thermal_governor *governor; struct list_head thermal_instances; struct idr idr; struct mutex lock; /* protect thermal_instances list */ struct list_head node; struct delayed_work poll_queue; }; -/* Adding event notification support elements */ -#define THERMAL_GENL_FAMILY_NAME "thermal_event" -#define THERMAL_GENL_VERSION 0x01 -#define THERMAL_GENL_MCAST_GROUP_NAME "thermal_mc_group" -enum events { - THERMAL_AUX0, - THERMAL_AUX1, - THERMAL_CRITICAL, - THERMAL_DEV_FAULT, +/* Structure that holds thermal governor information */ +struct thermal_governor { + char name[THERMAL_NAME_LENGTH]; + int (*throttle)(struct thermal_zone_device *tz, int trip); + struct list_head governor_list; + struct module *owner; }; -struct thermal_genl_event { - u32 orig; - enum events event; +/* Structure that holds binding parameters for a zone */ +struct thermal_bind_params { + struct thermal_cooling_device *cdev; + + /* + * This is a measure of 'how effectively these devices can + * cool 'this' thermal zone. The shall be determined by platform + * characterization. This is on a 'percentage' scale. + * See Documentation/thermal/sysfs-api.txt for more information. + */ + int weight; + + /* + * This is a bit mask that gives the binding relation between this + * thermal zone and cdev, for a particular trip point. + * See Documentation/thermal/sysfs-api.txt for more information. + */ + int trip_mask; + int (*match) (struct thermal_zone_device *tz, + struct thermal_cooling_device *cdev); }; -/* attributes of thermal_genl_family */ -enum { - THERMAL_GENL_ATTR_UNSPEC, - THERMAL_GENL_ATTR_EVENT, - __THERMAL_GENL_ATTR_MAX, + +/* Structure to define Thermal Zone parameters */ +struct thermal_zone_params { + char governor_name[THERMAL_NAME_LENGTH]; + int num_tbps; /* Number of tbp entries */ + struct thermal_bind_params *tbp; }; -#define THERMAL_GENL_ATTR_MAX (__THERMAL_GENL_ATTR_MAX - 1) -/* commands supported by the thermal_genl_family */ -enum { - THERMAL_GENL_CMD_UNSPEC, - THERMAL_GENL_CMD_EVENT, - __THERMAL_GENL_CMD_MAX, +struct thermal_genl_event { + u32 orig; + enum events event; }; -#define THERMAL_GENL_CMD_MAX (__THERMAL_GENL_CMD_MAX - 1) +/* Function declarations */ struct thermal_zone_device *thermal_zone_device_register(const char *, int, int, - void *, const struct thermal_zone_device_ops *, int, int); + void *, const struct thermal_zone_device_ops *, + const struct thermal_zone_params *, int, int); void thermal_zone_device_unregister(struct thermal_zone_device *); int thermal_zone_bind_cooling_device(struct thermal_zone_device *, int, @@ -173,10 +229,20 @@ int thermal_zone_bind_cooling_device(struct thermal_zone_device *, int, int thermal_zone_unbind_cooling_device(struct thermal_zone_device *, int, struct thermal_cooling_device *); void thermal_zone_device_update(struct thermal_zone_device *); + struct thermal_cooling_device *thermal_cooling_device_register(char *, void *, const struct thermal_cooling_device_ops *); void thermal_cooling_device_unregister(struct thermal_cooling_device *); +int get_tz_trend(struct thermal_zone_device *, int); +struct thermal_instance *get_thermal_instance(struct thermal_zone_device *, + struct thermal_cooling_device *, int); +void thermal_cdev_update(struct thermal_cooling_device *); +void notify_thermal_framework(struct thermal_zone_device *, int); + +int thermal_register_governor(struct thermal_governor *); +void thermal_unregister_governor(struct thermal_governor *); + #ifdef CONFIG_NET extern int thermal_generate_netlink_event(u32 orig, enum events event); #else diff --git a/include/linux/tick.h b/include/linux/tick.h index f37fceb69b73..1a6567b48492 100644 --- a/include/linux/tick.h +++ b/include/linux/tick.h @@ -142,4 +142,10 @@ static inline u64 get_cpu_idle_time_us(int cpu, u64 *unused) { return -1; } static inline u64 get_cpu_iowait_time_us(int cpu, u64 *unused) { return -1; } # endif /* !NO_HZ */ +# ifdef CONFIG_CPU_IDLE_GOV_MENU +extern void menu_hrtimer_cancel(void); +# else +static inline void menu_hrtimer_cancel(void) {} +# endif /* CONFIG_CPU_IDLE_GOV_MENU */ + #endif diff --git a/include/linux/timecompare.h b/include/linux/timecompare.h deleted file mode 100644 index 546e2234e4b3..000000000000 --- a/include/linux/timecompare.h +++ /dev/null @@ -1,125 +0,0 @@ -/* - * Utility code which helps transforming between two different time - * bases, called "source" and "target" time in this code. - * - * Source time has to be provided via the timecounter API while target - * time is accessed via a function callback whose prototype - * intentionally matches ktime_get() and ktime_get_real(). These - * interfaces where chosen like this so that the code serves its - * initial purpose without additional glue code. - * - * This purpose is synchronizing a hardware clock in a NIC with system - * time, in order to implement the Precision Time Protocol (PTP, - * IEEE1588) with more accurate hardware assisted time stamping. In - * that context only synchronization against system time (= - * ktime_get_real()) is currently needed. But this utility code might - * become useful in other situations, which is why it was written as - * general purpose utility code. - * - * The source timecounter is assumed to return monotonically - * increasing time (but this code does its best to compensate if that - * is not the case) whereas target time may jump. - * - * The target time corresponding to a source time is determined by - * reading target time, reading source time, reading target time - * again, then assuming that average target time corresponds to source - * time. In other words, the assumption is that reading the source - * time is slow and involves equal time for sending the request and - * receiving the reply, whereas reading target time is assumed to be - * fast. - * - * Copyright (C) 2009 Intel Corporation. - * Author: Patrick Ohly <patrick.ohly@intel.com> - * - * This program is free software; you can redistribute it and/or modify it - * under the terms and conditions of the GNU General Public License, - * version 2, as published by the Free Software Foundation. - * - * This program is distributed in the hope it will be useful, but WITHOUT - * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or - * FITNESS FOR A PARTICULAR PURPOSE. * See the GNU General Public License for - * more details. - * - * You should have received a copy of the GNU General Public License along with - * this program; if not, write to the Free Software Foundation, Inc., - * 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. - */ -#ifndef _LINUX_TIMECOMPARE_H -#define _LINUX_TIMECOMPARE_H - -#include <linux/clocksource.h> -#include <linux/ktime.h> - -/** - * struct timecompare - stores state and configuration for the two clocks - * - * Initialize to zero, then set source/target/num_samples. - * - * Transformation between source time and target time is done with: - * target_time = source_time + offset + - * (source_time - last_update) * skew / - * TIMECOMPARE_SKEW_RESOLUTION - * - * @source: used to get source time stamps via timecounter_read() - * @target: function returning target time (for example, ktime_get - * for monotonic time, or ktime_get_real for wall clock) - * @num_samples: number of times that source time and target time are to - * be compared when determining their offset - * @offset: (target time - source time) at the time of the last update - * @skew: average (target time - source time) / delta source time * - * TIMECOMPARE_SKEW_RESOLUTION - * @last_update: last source time stamp when time offset was measured - */ -struct timecompare { - struct timecounter *source; - ktime_t (*target)(void); - int num_samples; - - s64 offset; - s64 skew; - u64 last_update; -}; - -/** - * timecompare_transform - transform source time stamp into target time base - * @sync: context for time sync - * @source_tstamp: the result of timecounter_read() or - * timecounter_cyc2time() - */ -extern ktime_t timecompare_transform(struct timecompare *sync, - u64 source_tstamp); - -/** - * timecompare_offset - measure current (target time - source time) offset - * @sync: context for time sync - * @offset: average offset during sample period returned here - * @source_tstamp: average source time during sample period returned here - * - * Returns number of samples used. Might be zero (= no result) in the - * unlikely case that target time was monotonically decreasing for all - * samples (= broken). - */ -extern int timecompare_offset(struct timecompare *sync, - s64 *offset, - u64 *source_tstamp); - -extern void __timecompare_update(struct timecompare *sync, - u64 source_tstamp); - -/** - * timecompare_update - update offset and skew by measuring current offset - * @sync: context for time sync - * @source_tstamp: the result of timecounter_read() or - * timecounter_cyc2time(), pass zero to force update - * - * Updates are only done at most once per second. - */ -static inline void timecompare_update(struct timecompare *sync, - u64 source_tstamp) -{ - if (!source_tstamp || - (s64)(source_tstamp - sync->last_update) >= NSEC_PER_SEC) - __timecompare_update(sync, source_tstamp); -} - -#endif /* _LINUX_TIMECOMPARE_H */ diff --git a/include/linux/trace_clock.h b/include/linux/trace_clock.h index 4eb490237d4c..d563f37e1a1d 100644 --- a/include/linux/trace_clock.h +++ b/include/linux/trace_clock.h @@ -12,6 +12,8 @@ #include <linux/compiler.h> #include <linux/types.h> +#include <asm/trace_clock.h> + extern u64 notrace trace_clock_local(void); extern u64 notrace trace_clock(void); extern u64 notrace trace_clock_global(void); diff --git a/include/linux/tty.h b/include/linux/tty.h index f0b4eb47297c..8db1b569c37a 100644 --- a/include/linux/tty.h +++ b/include/linux/tty.h @@ -188,7 +188,9 @@ struct tty_port_operations { }; struct tty_port { + struct tty_bufhead buf; /* Locked internally */ struct tty_struct *tty; /* Back pointer */ + struct tty_struct *itty; /* internal back ptr */ const struct tty_port_operations *ops; /* Port operations */ spinlock_t lock; /* Lock protecting tty field */ int blocked_open; /* Waiting to open */ @@ -197,6 +199,9 @@ struct tty_port { wait_queue_head_t close_wait; /* Close waiters */ wait_queue_head_t delta_msr_wait; /* Modem status change */ unsigned long flags; /* TTY flags ASY_*/ + unsigned long iflags; /* TTYP_ internal flags */ +#define TTYP_FLUSHING 1 /* Flushing to ldisc in progress */ +#define TTYP_FLUSHPENDING 2 /* Queued buffer flush pending */ unsigned char console:1; /* port is a console */ struct mutex mutex; /* Locking */ struct mutex buf_mutex; /* Buffer alloc lock */ @@ -235,6 +240,7 @@ struct tty_struct { struct mutex ldisc_mutex; struct tty_ldisc *ldisc; + struct mutex atomic_write_lock; struct mutex legacy_mutex; struct mutex termios_mutex; spinlock_t ctrl_lock; @@ -254,7 +260,6 @@ struct tty_struct { struct tty_struct *link; struct fasync_struct *fasync; - struct tty_bufhead buf; /* Locked internally */ int alt_speed; /* For magic substitution of 38400 bps */ wait_queue_head_t write_wait; wait_queue_head_t read_wait; @@ -265,37 +270,10 @@ struct tty_struct { #define N_TTY_BUF_SIZE 4096 - /* - * The following is data for the N_TTY line discipline. For - * historical reasons, this is included in the tty structure. - * Mostly locked by the BKL. - */ - unsigned int column; - unsigned char lnext:1, erasing:1, raw:1, real_raw:1, icanon:1; unsigned char closing:1; - unsigned char echo_overrun:1; unsigned short minimum_to_wake; - unsigned long overrun_time; - int num_overrun; - unsigned long process_char_map[256/(8*sizeof(unsigned long))]; - char *read_buf; - int read_head; - int read_tail; - int read_cnt; - unsigned long read_flags[N_TTY_BUF_SIZE/(8*sizeof(unsigned long))]; - unsigned char *echo_buf; - unsigned int echo_pos; - unsigned int echo_cnt; - int canon_data; - unsigned long canon_head; - unsigned int canon_column; - struct mutex atomic_read_lock; - struct mutex atomic_write_lock; - struct mutex output_lock; - struct mutex echo_lock; unsigned char *write_buf; int write_cnt; - spinlock_t read_lock; /* If the tty has a pending do_SAK, queue it here - akpm */ struct work_struct SAK_work; struct tty_port *port; @@ -335,8 +313,6 @@ struct tty_file_private { #define TTY_PTY_LOCK 16 /* pty private */ #define TTY_NO_WRITE_SPLIT 17 /* Preserve write boundaries to driver */ #define TTY_HUPPED 18 /* Post driver->hangup() */ -#define TTY_FLUSHING 19 /* Flushing to ldisc in progress */ -#define TTY_FLUSHPENDING 20 /* Queued buffer flush pending */ #define TTY_HUPPING 21 /* ->hangup() in progress */ #define TTY_WRITE_FLUSH(tty) tty_write_flush((tty)) @@ -412,9 +388,9 @@ extern void disassociate_ctty(int priv); extern void no_tty(void); extern void tty_flip_buffer_push(struct tty_struct *tty); extern void tty_flush_to_ldisc(struct tty_struct *tty); -extern void tty_buffer_free_all(struct tty_struct *tty); +extern void tty_buffer_free_all(struct tty_port *port); extern void tty_buffer_flush(struct tty_struct *tty); -extern void tty_buffer_init(struct tty_struct *tty); +extern void tty_buffer_init(struct tty_port *port); extern speed_t tty_get_baud_rate(struct tty_struct *tty); extern speed_t tty_termios_baud_rate(struct ktermios *termios); extern speed_t tty_termios_input_baud_rate(struct ktermios *termios); @@ -479,6 +455,7 @@ extern struct device *tty_port_register_device_attr(struct tty_port *port, const struct attribute_group **attr_grp); extern int tty_port_alloc_xmit_buf(struct tty_port *port); extern void tty_port_free_xmit_buf(struct tty_port *port); +extern void tty_port_destroy(struct tty_port *port); extern void tty_port_put(struct tty_port *port); static inline struct tty_port *tty_port_get(struct tty_port *port) @@ -535,7 +512,7 @@ extern void n_tty_inherit_ops(struct tty_ldisc_ops *ops); /* tty_audit.c */ #ifdef CONFIG_AUDIT extern void tty_audit_add_data(struct tty_struct *tty, unsigned char *data, - size_t size); + size_t size, unsigned icanon); extern void tty_audit_exit(void); extern void tty_audit_fork(struct signal_struct *sig); extern void tty_audit_tiocsti(struct tty_struct *tty, char ch); @@ -544,7 +521,7 @@ extern int tty_audit_push_task(struct task_struct *tsk, kuid_t loginuid, u32 sessionid); #else static inline void tty_audit_add_data(struct tty_struct *tty, - unsigned char *data, size_t size) + unsigned char *data, size_t size, unsigned icanon) { } static inline void tty_audit_tiocsti(struct tty_struct *tty, char ch) diff --git a/include/linux/tty_flip.h b/include/linux/tty_flip.h index 9239d033a0a3..2002344ed36a 100644 --- a/include/linux/tty_flip.h +++ b/include/linux/tty_flip.h @@ -11,7 +11,7 @@ void tty_schedule_flip(struct tty_struct *tty); static inline int tty_insert_flip_char(struct tty_struct *tty, unsigned char ch, char flag) { - struct tty_buffer *tb = tty->buf.tail; + struct tty_buffer *tb = tty->port->buf.tail; if (tb && tb->used < tb->size) { tb->flag_buf_ptr[tb->used] = flag; tb->char_buf_ptr[tb->used++] = ch; diff --git a/include/linux/types.h b/include/linux/types.h index 1cc0e4b9a048..4d118ba11349 100644 --- a/include/linux/types.h +++ b/include/linux/types.h @@ -156,6 +156,7 @@ typedef u32 dma_addr_t; #endif typedef unsigned __bitwise__ gfp_t; typedef unsigned __bitwise__ fmode_t; +typedef unsigned __bitwise__ oom_flags_t; #ifdef CONFIG_PHYS_ADDR_T_64BIT typedef u64 phys_addr_t; diff --git a/include/linux/udp.h b/include/linux/udp.h index 0b67d7793520..9d81de123c90 100644 --- a/include/linux/udp.h +++ b/include/linux/udp.h @@ -27,6 +27,11 @@ static inline struct udphdr *udp_hdr(const struct sk_buff *skb) return (struct udphdr *)skb_transport_header(skb); } +static inline struct udphdr *inner_udp_hdr(const struct sk_buff *skb) +{ + return (struct udphdr *)skb_inner_transport_header(skb); +} + #define UDP_HTABLE_SIZE_MIN (CONFIG_BASE_SMALL ? 128 : 256) static inline int udp_hashfn(struct net *net, unsigned num, unsigned mask) diff --git a/include/linux/uprobes.h b/include/linux/uprobes.h index 24594571c5a3..4f628a6fc5b4 100644 --- a/include/linux/uprobes.h +++ b/include/linux/uprobes.h @@ -97,12 +97,12 @@ extern int uprobe_register(struct inode *inode, loff_t offset, struct uprobe_con extern void uprobe_unregister(struct inode *inode, loff_t offset, struct uprobe_consumer *uc); extern int uprobe_mmap(struct vm_area_struct *vma); extern void uprobe_munmap(struct vm_area_struct *vma, unsigned long start, unsigned long end); +extern void uprobe_start_dup_mmap(void); +extern void uprobe_end_dup_mmap(void); extern void uprobe_dup_mmap(struct mm_struct *oldmm, struct mm_struct *newmm); extern void uprobe_free_utask(struct task_struct *t); extern void uprobe_copy_process(struct task_struct *t); extern unsigned long __weak uprobe_get_swbp_addr(struct pt_regs *regs); -extern void __weak arch_uprobe_enable_step(struct arch_uprobe *arch); -extern void __weak arch_uprobe_disable_step(struct arch_uprobe *arch); extern int uprobe_post_sstep_notifier(struct pt_regs *regs); extern int uprobe_pre_sstep_notifier(struct pt_regs *regs); extern void uprobe_notify_resume(struct pt_regs *regs); @@ -129,6 +129,12 @@ static inline void uprobe_munmap(struct vm_area_struct *vma, unsigned long start, unsigned long end) { } +static inline void uprobe_start_dup_mmap(void) +{ +} +static inline void uprobe_end_dup_mmap(void) +{ +} static inline void uprobe_dup_mmap(struct mm_struct *oldmm, struct mm_struct *newmm) { diff --git a/include/linux/usb.h b/include/linux/usb.h index 10278d18709c..689b14b26c8d 100644 --- a/include/linux/usb.h +++ b/include/linux/usb.h @@ -482,6 +482,7 @@ struct usb3_lpm_parameters { * @connect_time: time device was first connected * @do_remote_wakeup: remote wakeup should be enabled * @reset_resume: needs reset instead of resume + * @port_is_suspended: the upstream port is suspended (L2 or U3) * @wusb_dev: if this is a Wireless USB device, link to the WUSB * specific data for the device. * @slot_id: Slot ID assigned by xHCI @@ -560,6 +561,7 @@ struct usb_device { unsigned do_remote_wakeup:1; unsigned reset_resume:1; + unsigned port_is_suspended:1; #endif struct wusb_dev *wusb_dev; int slot_id; @@ -588,8 +590,9 @@ extern struct usb_device *usb_hub_find_child(struct usb_device *hdev, */ #define usb_hub_for_each_child(hdev, port1, child) \ for (port1 = 1, child = usb_hub_find_child(hdev, port1); \ - port1 <= hdev->maxchild; \ - child = usb_hub_find_child(hdev, ++port1)) + port1 <= hdev->maxchild; \ + child = usb_hub_find_child(hdev, ++port1)) \ + if (!child) continue; else /* USB device locking */ #define usb_lock_device(udev) device_lock(&(udev)->dev) @@ -805,6 +808,22 @@ static inline int usb_make_path(struct usb_device *dev, char *buf, size_t size) .bcdDevice_hi = (hi) /** + * USB_DEVICE_INTERFACE_CLASS - describe a usb device with a specific interface class + * @vend: the 16 bit USB Vendor ID + * @prod: the 16 bit USB Product ID + * @cl: bInterfaceClass value + * + * This macro is used to create a struct usb_device_id that matches a + * specific interface class of devices. + */ +#define USB_DEVICE_INTERFACE_CLASS(vend, prod, cl) \ + .match_flags = USB_DEVICE_ID_MATCH_DEVICE | \ + USB_DEVICE_ID_MATCH_INT_CLASS, \ + .idVendor = (vend), \ + .idProduct = (prod), \ + .bInterfaceClass = (cl) + +/** * USB_DEVICE_INTERFACE_PROTOCOL - describe a usb device with a specific interface protocol * @vend: the 16 bit USB Vendor ID * @prod: the 16 bit USB Product ID @@ -1129,8 +1148,8 @@ extern int usb_disabled(void); * Note: URB_DIR_IN/OUT is automatically set in usb_submit_urb(). */ #define URB_SHORT_NOT_OK 0x0001 /* report short reads as errors */ -#define URB_ISO_ASAP 0x0002 /* iso-only, urb->start_frame - * ignored */ +#define URB_ISO_ASAP 0x0002 /* iso-only; use the first unexpired + * slot in the schedule */ #define URB_NO_TRANSFER_DMA_MAP 0x0004 /* urb->transfer_dma valid on submit */ #define URB_NO_FSBR 0x0020 /* UHCI-specific */ #define URB_ZERO_PACKET 0x0040 /* Finish bulk OUT with short packet */ @@ -1309,15 +1328,20 @@ typedef void (*usb_complete_t)(struct urb *); * the transfer interval in the endpoint descriptor is logarithmic. * Device drivers must convert that value to linear units themselves.) * - * Isochronous URBs normally use the URB_ISO_ASAP transfer flag, telling - * the host controller to schedule the transfer as soon as bandwidth - * utilization allows, and then set start_frame to reflect the actual frame - * selected during submission. Otherwise drivers must specify the start_frame - * and handle the case where the transfer can't begin then. However, drivers - * won't know how bandwidth is currently allocated, and while they can - * find the current frame using usb_get_current_frame_number () they can't - * know the range for that frame number. (Ranges for frame counter values - * are HC-specific, and can go from 256 to 65536 frames from "now".) + * If an isochronous endpoint queue isn't already running, the host + * controller will schedule a new URB to start as soon as bandwidth + * utilization allows. If the queue is running then a new URB will be + * scheduled to start in the first transfer slot following the end of the + * preceding URB, if that slot has not already expired. If the slot has + * expired (which can happen when IRQ delivery is delayed for a long time), + * the scheduling behavior depends on the URB_ISO_ASAP flag. If the flag + * is clear then the URB will be scheduled to start in the expired slot, + * implying that some of its packets will not be transferred; if the flag + * is set then the URB will be scheduled in the first unexpired slot, + * breaking the queue's synchronization. Upon URB completion, the + * start_frame field will be set to the (micro)frame number in which the + * transfer was scheduled. Ranges for frame counter values are HC-specific + * and can go from as low as 256 to as high as 65536 frames. * * Isochronous URBs have a different data transfer model, in part because * the quality of service is only "best effort". Callers provide specially diff --git a/include/linux/usb/cdc_ncm.h b/include/linux/usb/cdc_ncm.h new file mode 100644 index 000000000000..3b8f9d4fc3fe --- /dev/null +++ b/include/linux/usb/cdc_ncm.h @@ -0,0 +1,134 @@ +/* + * Copyright (C) ST-Ericsson 2010-2012 + * Contact: Alexey Orishko <alexey.orishko@stericsson.com> + * Original author: Hans Petter Selasky <hans.petter.selasky@stericsson.com> + * + * USB Host Driver for Network Control Model (NCM) + * http://www.usb.org/developers/devclass_docs/NCM10.zip + * + * The NCM encoding, decoding and initialization logic + * derives from FreeBSD 8.x. if_cdce.c and if_cdcereg.h + * + * This software is available to you under a choice of one of two + * licenses. You may choose this file to be licensed under the terms + * of the GNU General Public License (GPL) Version 2 or the 2-clause + * BSD license listed below: + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * + * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND + * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE + * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS + * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) + * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT + * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY + * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF + * SUCH DAMAGE. + */ + +#define CDC_NCM_COMM_ALTSETTING_NCM 0 +#define CDC_NCM_COMM_ALTSETTING_MBIM 1 + +#define CDC_NCM_DATA_ALTSETTING_NCM 1 +#define CDC_NCM_DATA_ALTSETTING_MBIM 2 + +/* CDC NCM subclass 3.2.1 */ +#define USB_CDC_NCM_NDP16_LENGTH_MIN 0x10 + +/* Maximum NTB length */ +#define CDC_NCM_NTB_MAX_SIZE_TX 32768 /* bytes */ +#define CDC_NCM_NTB_MAX_SIZE_RX 32768 /* bytes */ + +/* Minimum value for MaxDatagramSize, ch. 6.2.9 */ +#define CDC_NCM_MIN_DATAGRAM_SIZE 1514 /* bytes */ + +/* Minimum value for MaxDatagramSize, ch. 8.1.3 */ +#define CDC_MBIM_MIN_DATAGRAM_SIZE 2048 /* bytes */ + +#define CDC_NCM_MIN_TX_PKT 512 /* bytes */ + +/* Default value for MaxDatagramSize */ +#define CDC_NCM_MAX_DATAGRAM_SIZE 8192 /* bytes */ + +/* + * Maximum amount of datagrams in NCM Datagram Pointer Table, not counting + * the last NULL entry. + */ +#define CDC_NCM_DPT_DATAGRAMS_MAX 40 + +/* Restart the timer, if amount of datagrams is less than given value */ +#define CDC_NCM_RESTART_TIMER_DATAGRAM_CNT 3 +#define CDC_NCM_TIMER_PENDING_CNT 2 +#define CDC_NCM_TIMER_INTERVAL (400UL * NSEC_PER_USEC) + +/* The following macro defines the minimum header space */ +#define CDC_NCM_MIN_HDR_SIZE \ + (sizeof(struct usb_cdc_ncm_nth16) + sizeof(struct usb_cdc_ncm_ndp16) + \ + (CDC_NCM_DPT_DATAGRAMS_MAX + 1) * sizeof(struct usb_cdc_ncm_dpe16)) + +#define CDC_NCM_NDP_SIZE \ + (sizeof(struct usb_cdc_ncm_ndp16) + \ + (CDC_NCM_DPT_DATAGRAMS_MAX + 1) * sizeof(struct usb_cdc_ncm_dpe16)) + +#define cdc_ncm_comm_intf_is_mbim(x) ((x)->desc.bInterfaceSubClass == USB_CDC_SUBCLASS_MBIM && \ + (x)->desc.bInterfaceProtocol == USB_CDC_PROTO_NONE) +#define cdc_ncm_data_intf_is_mbim(x) ((x)->desc.bInterfaceProtocol == USB_CDC_MBIM_PROTO_NTB) + +struct cdc_ncm_ctx { + struct usb_cdc_ncm_ntb_parameters ncm_parm; + struct hrtimer tx_timer; + struct tasklet_struct bh; + + const struct usb_cdc_ncm_desc *func_desc; + const struct usb_cdc_mbim_desc *mbim_desc; + const struct usb_cdc_header_desc *header_desc; + const struct usb_cdc_union_desc *union_desc; + const struct usb_cdc_ether_desc *ether_desc; + + struct net_device *netdev; + struct usb_device *udev; + struct usb_host_endpoint *in_ep; + struct usb_host_endpoint *out_ep; + struct usb_host_endpoint *status_ep; + struct usb_interface *intf; + struct usb_interface *control; + struct usb_interface *data; + + struct sk_buff *tx_curr_skb; + struct sk_buff *tx_rem_skb; + __le32 tx_rem_sign; + + spinlock_t mtx; + atomic_t stop; + + u32 tx_timer_pending; + u32 tx_curr_frame_num; + u32 rx_speed; + u32 tx_speed; + u32 rx_max; + u32 tx_max; + u32 max_datagram_size; + u16 tx_max_datagrams; + u16 tx_remainder; + u16 tx_modulus; + u16 tx_ndp_modulus; + u16 tx_seq; + u16 rx_seq; + u16 connected; +}; + +extern int cdc_ncm_bind_common(struct usbnet *dev, struct usb_interface *intf, u8 data_altsetting); +extern void cdc_ncm_unbind(struct usbnet *dev, struct usb_interface *intf); +extern struct sk_buff *cdc_ncm_fill_tx_frame(struct cdc_ncm_ctx *ctx, struct sk_buff *skb, __le32 sign); +extern int cdc_ncm_rx_verify_nth16(struct cdc_ncm_ctx *ctx, struct sk_buff *skb_in); +extern int cdc_ncm_rx_verify_ndp16(struct sk_buff *skb_in, int ndpoffset); diff --git a/include/linux/usb/composite.h b/include/linux/usb/composite.h index f8dda0621800..b09c37e04a91 100644 --- a/include/linux/usb/composite.h +++ b/include/linux/usb/composite.h @@ -38,6 +38,7 @@ #include <linux/version.h> #include <linux/usb/ch9.h> #include <linux/usb/gadget.h> +#include <linux/log2.h> /* * USB function drivers should return USB_GADGET_DELAYED_STATUS if they @@ -51,6 +52,7 @@ /* big enough to hold our biggest descriptor */ #define USB_COMP_EP0_BUFSIZ 1024 +#define USB_MS_TO_HS_INTERVAL(x) (ilog2((x * 1000 / 125)) + 1) struct usb_configuration; /** @@ -117,7 +119,7 @@ struct usb_configuration; struct usb_function { const char *name; struct usb_gadget_strings **strings; - struct usb_descriptor_header **descriptors; + struct usb_descriptor_header **fs_descriptors; struct usb_descriptor_header **hs_descriptors; struct usb_descriptor_header **ss_descriptors; diff --git a/include/linux/usb/ehci_pdriver.h b/include/linux/usb/ehci_pdriver.h index c9d09f8b7ff2..99238b096f7e 100644 --- a/include/linux/usb/ehci_pdriver.h +++ b/include/linux/usb/ehci_pdriver.h @@ -29,6 +29,8 @@ * initialization. * @port_power_off: set to 1 if the controller needs to be powered down * after initialization. + * @no_io_watchdog: set to 1 if the controller does not need the I/O + * watchdog to run. * * These are general configuration options for the EHCI controller. All of * these options are activating more or less workarounds for some hardware. @@ -39,8 +41,7 @@ struct usb_ehci_pdata { unsigned has_synopsys_hc_bug:1; unsigned big_endian_desc:1; unsigned big_endian_mmio:1; - unsigned port_power_on:1; - unsigned port_power_off:1; + unsigned no_io_watchdog:1; /* Turn on all power and clocks */ int (*power_on)(struct platform_device *pdev); diff --git a/include/linux/usb/ezusb.h b/include/linux/usb/ezusb.h index fc618d8d1e92..639ee45779fb 100644 --- a/include/linux/usb/ezusb.h +++ b/include/linux/usb/ezusb.h @@ -1,16 +1,8 @@ #ifndef __EZUSB_H #define __EZUSB_H - -extern int ezusb_writememory(struct usb_device *dev, int address, - unsigned char *data, int length, __u8 bRequest); - extern int ezusb_fx1_set_reset(struct usb_device *dev, unsigned char reset_bit); -extern int ezusb_fx2_set_reset(struct usb_device *dev, unsigned char reset_bit); - extern int ezusb_fx1_ihex_firmware_download(struct usb_device *dev, const char *firmware_path); -extern int ezusb_fx2_ihex_firmware_download(struct usb_device *dev, - const char *firmware_path); #endif /* __EZUSB_H */ diff --git a/include/linux/usb/gadget.h b/include/linux/usb/gadget.h index 5b6e50888248..0af6569b8cc6 100644 --- a/include/linux/usb/gadget.h +++ b/include/linux/usb/gadget.h @@ -939,6 +939,13 @@ static inline void usb_free_descriptors(struct usb_descriptor_header **v) kfree(v); } +struct usb_function; +int usb_assign_descriptors(struct usb_function *f, + struct usb_descriptor_header **fs, + struct usb_descriptor_header **hs, + struct usb_descriptor_header **ss); +void usb_free_all_descriptors(struct usb_function *f); + /*-------------------------------------------------------------------------*/ /* utility to simplify map/unmap of usb_requests to/from DMA */ diff --git a/include/linux/usb/ohci_pdriver.h b/include/linux/usb/ohci_pdriver.h index 74e7755168b7..012f2b7eb2b6 100644 --- a/include/linux/usb/ohci_pdriver.h +++ b/include/linux/usb/ohci_pdriver.h @@ -25,6 +25,7 @@ * @big_endian_desc: BE descriptors * @big_endian_mmio: BE registers * @no_big_frame_no: no big endian frame_no shift + * @num_ports: number of ports * * These are general configuration options for the OHCI controller. All of * these options are activating more or less workarounds for some hardware. @@ -33,6 +34,7 @@ struct usb_ohci_pdata { unsigned big_endian_desc:1; unsigned big_endian_mmio:1; unsigned no_big_frame_no:1; + unsigned int num_ports; /* Turn on all power and clocks */ int (*power_on)(struct platform_device *pdev); diff --git a/include/linux/usb/phy.h b/include/linux/usb/phy.h index 06b5bae35b29..a29ae1eb9346 100644 --- a/include/linux/usb/phy.h +++ b/include/linux/usb/phy.h @@ -10,6 +10,7 @@ #define __LINUX_USB_PHY_H #include <linux/notifier.h> +#include <linux/usb.h> enum usb_phy_events { USB_EVENT_NONE, /* no events or cable disconnected */ @@ -99,8 +100,10 @@ struct usb_phy { int suspend); /* notify phy connect status change */ - int (*notify_connect)(struct usb_phy *x, int port); - int (*notify_disconnect)(struct usb_phy *x, int port); + int (*notify_connect)(struct usb_phy *x, + enum usb_device_speed speed); + int (*notify_disconnect)(struct usb_phy *x, + enum usb_device_speed speed); }; @@ -189,19 +192,19 @@ usb_phy_set_suspend(struct usb_phy *x, int suspend) } static inline int -usb_phy_notify_connect(struct usb_phy *x, int port) +usb_phy_notify_connect(struct usb_phy *x, enum usb_device_speed speed) { if (x->notify_connect) - return x->notify_connect(x, port); + return x->notify_connect(x, speed); else return 0; } static inline int -usb_phy_notify_disconnect(struct usb_phy *x, int port) +usb_phy_notify_disconnect(struct usb_phy *x, enum usb_device_speed speed) { if (x->notify_disconnect) - return x->notify_disconnect(x, port); + return x->notify_disconnect(x, speed); else return 0; } diff --git a/include/linux/usb/usbnet.h b/include/linux/usb/usbnet.h index ddbbb7de894b..9bbeabf66c54 100644 --- a/include/linux/usb/usbnet.h +++ b/include/linux/usb/usbnet.h @@ -163,6 +163,16 @@ extern int usbnet_resume(struct usb_interface *); extern void usbnet_disconnect(struct usb_interface *); extern void usbnet_device_suggests_idle(struct usbnet *dev); +extern int usbnet_read_cmd(struct usbnet *dev, u8 cmd, u8 reqtype, + u16 value, u16 index, void *data, u16 size); +extern int usbnet_write_cmd(struct usbnet *dev, u8 cmd, u8 reqtype, + u16 value, u16 index, const void *data, u16 size); +extern int usbnet_read_cmd_nopm(struct usbnet *dev, u8 cmd, u8 reqtype, + u16 value, u16 index, void *data, u16 size); +extern int usbnet_write_cmd_nopm(struct usbnet *dev, u8 cmd, u8 reqtype, + u16 value, u16 index, const void *data, u16 size); +extern int usbnet_write_cmd_async(struct usbnet *dev, u8 cmd, u8 reqtype, + u16 value, u16 index, const void *data, u16 size); /* Drivers that reuse some of the standard USB CDC infrastructure * (notably, using multiple interfaces according to the CDC diff --git a/include/linux/vexpress.h b/include/linux/vexpress.h new file mode 100644 index 000000000000..c52215ff4245 --- /dev/null +++ b/include/linux/vexpress.h @@ -0,0 +1,121 @@ +/* + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Copyright (C) 2012 ARM Limited + */ + +#ifndef _LINUX_VEXPRESS_H +#define _LINUX_VEXPRESS_H + +#include <linux/device.h> + +#define VEXPRESS_SITE_MB 0 +#define VEXPRESS_SITE_DB1 1 +#define VEXPRESS_SITE_DB2 2 +#define VEXPRESS_SITE_MASTER 0xf + +#define VEXPRESS_CONFIG_STATUS_DONE 0 +#define VEXPRESS_CONFIG_STATUS_WAIT 1 + +#define VEXPRESS_GPIO_MMC_CARDIN 0 +#define VEXPRESS_GPIO_MMC_WPROT 1 +#define VEXPRESS_GPIO_FLASH_WPn 2 + +#define VEXPRESS_RES_FUNC(_site, _func) \ +{ \ + .start = (_site), \ + .end = (_func), \ + .flags = IORESOURCE_BUS, \ +} + +/* Config bridge API */ + +/** + * struct vexpress_config_bridge_info - description of the platform + * configuration infrastructure bridge. + * + * @name: Bridge name + * + * @func_get: Obtains pointer to a configuration function for a given + * device or a Device Tree node, to be used with @func_put + * and @func_exec. The node pointer should take precedence + * over device pointer when both are passed. + * + * @func_put: Tells the bridge that the function will not be used any + * more, so all allocated resources can be released. + * + * @func_exec: Executes a configuration function read or write operation. + * The offset selects a 32 bit word of the value accessed. + * Must return VEXPRESS_CONFIG_STATUS_DONE when operation + * is finished immediately, VEXPRESS_CONFIG_STATUS_WAIT when + * will be completed in some time or negative value in case + * of error. + */ +struct vexpress_config_bridge_info { + const char *name; + void *(*func_get)(struct device *dev, struct device_node *node); + void (*func_put)(void *func); + int (*func_exec)(void *func, int offset, bool write, u32 *data); +}; + +struct vexpress_config_bridge; + +struct vexpress_config_bridge *vexpress_config_bridge_register( + struct device_node *node, + struct vexpress_config_bridge_info *info); +void vexpress_config_bridge_unregister(struct vexpress_config_bridge *bridge); + +void vexpress_config_complete(struct vexpress_config_bridge *bridge, + int status); + +/* Config function API */ + +struct vexpress_config_func; + +struct vexpress_config_func *__vexpress_config_func_get(struct device *dev, + struct device_node *node); +#define vexpress_config_func_get_by_dev(dev) \ + __vexpress_config_func_get(dev, NULL) +#define vexpress_config_func_get_by_node(node) \ + __vexpress_config_func_get(NULL, node) +void vexpress_config_func_put(struct vexpress_config_func *func); + +/* Both may sleep! */ +int vexpress_config_read(struct vexpress_config_func *func, int offset, + u32 *data); +int vexpress_config_write(struct vexpress_config_func *func, int offset, + u32 data); + +/* Platform control */ + +u32 vexpress_get_procid(int site); +u32 vexpress_get_hbi(int site); +void *vexpress_get_24mhz_clock_base(void); +void vexpress_flags_set(u32 data); + +#define vexpress_get_site_by_node(node) __vexpress_get_site(NULL, node) +#define vexpress_get_site_by_dev(dev) __vexpress_get_site(dev, NULL) +unsigned __vexpress_get_site(struct device *dev, struct device_node *node); + +void vexpress_sysreg_early_init(void __iomem *base); +void vexpress_sysreg_of_early_init(void); + +void vexpress_power_off(void); +void vexpress_restart(char str, const char *cmd); + +/* Clocks */ + +struct clk *vexpress_osc_setup(struct device *dev); +void vexpress_osc_of_setup(struct device_node *node); + +void vexpress_clk_init(void __iomem *sp810_base); +void vexpress_clk_of_init(void); + +#endif diff --git a/include/linux/vgaarb.h b/include/linux/vgaarb.h index 0ee42d9acdc0..2c02f3a8d2ba 100644 --- a/include/linux/vgaarb.h +++ b/include/linux/vgaarb.h @@ -78,7 +78,7 @@ extern void vga_set_legacy_decoding(struct pci_dev *pdev, * This function acquires VGA resources for the given * card and mark those resources locked. If the resource requested * are "normal" (and not legacy) resources, the arbiter will first check - * wether the card is doing legacy decoding for that type of resource. If + * whether the card is doing legacy decoding for that type of resource. If * yes, the lock is "converted" into a legacy resource lock. * The arbiter will first look for all VGA cards that might conflict * and disable their IOs and/or Memory access, including VGA forwarding @@ -89,7 +89,7 @@ extern void vga_set_legacy_decoding(struct pci_dev *pdev, * This function will block if some conflicting card is already locking * one of the required resources (or any resource on a different bus * segment, since P2P bridges don't differenciate VGA memory and IO - * afaik). You can indicate wether this blocking should be interruptible + * afaik). You can indicate whether this blocking should be interruptible * by a signal (for userland interface) or not. * Must not be called at interrupt time or in atomic context. * If the card already owns the resources, the function succeeds. diff --git a/include/linux/vm_event_item.h b/include/linux/vm_event_item.h index 3d3114594370..fe786f07d2bd 100644 --- a/include/linux/vm_event_item.h +++ b/include/linux/vm_event_item.h @@ -58,6 +58,8 @@ enum vm_event_item { PGPGIN, PGPGOUT, PSWPIN, PSWPOUT, THP_COLLAPSE_ALLOC, THP_COLLAPSE_ALLOC_FAILED, THP_SPLIT, + THP_ZERO_PAGE_ALLOC, + THP_ZERO_PAGE_ALLOC_FAILED, #endif NR_VM_EVENT_ITEMS }; diff --git a/include/linux/vtime.h b/include/linux/vtime.h new file mode 100644 index 000000000000..ae30ab58431a --- /dev/null +++ b/include/linux/vtime.h @@ -0,0 +1,48 @@ +#ifndef _LINUX_KERNEL_VTIME_H +#define _LINUX_KERNEL_VTIME_H + +struct task_struct; + +#ifdef CONFIG_VIRT_CPU_ACCOUNTING +extern void vtime_task_switch(struct task_struct *prev); +extern void vtime_account_system(struct task_struct *tsk); +extern void vtime_account_system_irqsafe(struct task_struct *tsk); +extern void vtime_account_idle(struct task_struct *tsk); +extern void vtime_account_user(struct task_struct *tsk); +extern void vtime_account(struct task_struct *tsk); +#else +static inline void vtime_task_switch(struct task_struct *prev) { } +static inline void vtime_account_system(struct task_struct *tsk) { } +static inline void vtime_account_system_irqsafe(struct task_struct *tsk) { } +static inline void vtime_account(struct task_struct *tsk) { } +#endif + +#ifdef CONFIG_IRQ_TIME_ACCOUNTING +extern void irqtime_account_irq(struct task_struct *tsk); +#else +static inline void irqtime_account_irq(struct task_struct *tsk) { } +#endif + +static inline void vtime_account_irq_enter(struct task_struct *tsk) +{ + /* + * Hardirq can interrupt idle task anytime. So we need vtime_account() + * that performs the idle check in CONFIG_VIRT_CPU_ACCOUNTING. + * Softirq can also interrupt idle task directly if it calls + * local_bh_enable(). Such case probably don't exist but we never know. + * Ksoftirqd is not concerned because idle time is flushed on context + * switch. Softirqs in the end of hardirqs are also not a problem because + * the idle time is flushed on hardirq time already. + */ + vtime_account(tsk); + irqtime_account_irq(tsk); +} + +static inline void vtime_account_irq_exit(struct task_struct *tsk) +{ + /* On hard|softirq exit we always account to hard|softirq cputime */ + vtime_account_system(tsk); + irqtime_account_irq(tsk); +} + +#endif /* _LINUX_KERNEL_VTIME_H */ diff --git a/include/linux/watchdog.h b/include/linux/watchdog.h index b7f45d48b2de..87490ac4bd87 100644 --- a/include/linux/watchdog.h +++ b/include/linux/watchdog.h @@ -105,7 +105,7 @@ struct watchdog_device { #define WATCHDOG_NOWAYOUT_INIT_STATUS 0 #endif -/* Use the following function to check wether or not the watchdog is active */ +/* Use the following function to check whether or not the watchdog is active */ static inline bool watchdog_active(struct watchdog_device *wdd) { return test_bit(WDOG_ACTIVE, &wdd->status); diff --git a/include/linux/writeback.h b/include/linux/writeback.h index 50c3e8fa06a8..b82a83aba311 100644 --- a/include/linux/writeback.h +++ b/include/linux/writeback.h @@ -161,14 +161,7 @@ void __bdi_update_bandwidth(struct backing_dev_info *bdi, unsigned long start_time); void page_writeback_init(void); -void balance_dirty_pages_ratelimited_nr(struct address_space *mapping, - unsigned long nr_pages_dirtied); - -static inline void -balance_dirty_pages_ratelimited(struct address_space *mapping) -{ - balance_dirty_pages_ratelimited_nr(mapping, 1); -} +void balance_dirty_pages_ratelimited(struct address_space *mapping); typedef int (*writepage_t)(struct page *page, struct writeback_control *wbc, void *data); |