4 files changed, 67 insertions, 8 deletions

diff --git a/include/linux/bpf.h b/include/linux/bpf.h
index c13e92b00bf5..36da0749205a 100644
--- a/include/linux/bpf.h
+++ b/include/linux/bpf.h
@@ -224,6 +224,7 @@ void bpf_register_map_type(struct bpf_map_type_list *tl);
 
 struct bpf_prog *bpf_prog_get(u32 ufd);
 struct bpf_prog *bpf_prog_get_type(u32 ufd, enum bpf_prog_type type);
+struct bpf_prog *bpf_prog_add(struct bpf_prog *prog, int i);
 struct bpf_prog *bpf_prog_inc(struct bpf_prog *prog);
 void bpf_prog_put(struct bpf_prog *prog);
 
@@ -288,6 +289,10 @@ static inline struct bpf_prog *bpf_prog_get_type(u32 ufd,
 {
 	return ERR_PTR(-EOPNOTSUPP);
 }
+static inline struct bpf_prog *bpf_prog_add(struct bpf_prog *prog, int i)
+{
+	return ERR_PTR(-EOPNOTSUPP);
+}
 
 static inline void bpf_prog_put(struct bpf_prog *prog)
 {
diff --git a/include/linux/filter.h b/include/linux/filter.h
index 6fc31ef1da2d..15d816a8b755 100644
--- a/include/linux/filter.h
+++ b/include/linux/filter.h
@@ -368,6 +368,11 @@ struct bpf_skb_data_end {
 	void *data_end;
 };
 
+struct xdp_buff {
+	void *data;
+	void *data_end;
+};
+
 /* compute the linear packet data range [data, data_end) which
  * will be accessed by cls_bpf and act_bpf programs
  */
@@ -429,6 +434,18 @@ static inline u32 bpf_prog_run_clear_cb(const struct bpf_prog *prog,
 	return BPF_PROG_RUN(prog, skb);
 }
 
+static inline u32 bpf_prog_run_xdp(const struct bpf_prog *prog,
+				   struct xdp_buff *xdp)
+{
+	u32 ret;
+
+	rcu_read_lock();
+	ret = BPF_PROG_RUN(prog, (void *)xdp);
+	rcu_read_unlock();
+
+	return ret;
+}
+
 static inline unsigned int bpf_prog_size(unsigned int proglen)
 {
 	return max(sizeof(struct bpf_prog),
@@ -509,6 +526,7 @@ bool bpf_helper_changes_skb_data(void *func);
 
 struct bpf_prog *bpf_patch_insn_single(struct bpf_prog *prog, u32 off,
 				       const struct bpf_insn *patch, u32 len);
+void bpf_warn_invalid_xdp_action(u32 act);
 
 #ifdef CONFIG_BPF_JIT
 extern int bpf_jit_enable;
diff --git a/include/linux/mlx4/qp.h b/include/linux/mlx4/qp.h
index 587cdf943b52..deaa2217214d 100644
--- a/include/linux/mlx4/qp.h
+++ b/include/linux/mlx4/qp.h
@@ -291,16 +291,18 @@ enum {
 	MLX4_WQE_CTRL_FORCE_LOOPBACK	= 1 << 0,
 };
 
+union mlx4_wqe_qpn_vlan {
+	struct {
+		__be16	vlan_tag;
+		u8	ins_vlan;
+		u8	fence_size;
+	};
+	__be32		bf_qpn;
+};
+
 struct mlx4_wqe_ctrl_seg {
 	__be32			owner_opcode;
-	union {
-		struct {
-			__be16			vlan_tag;
-			u8			ins_vlan;
-			u8			fence_size;
-		};
-		__be32			bf_qpn;
-	};
+	union mlx4_wqe_qpn_vlan	qpn_vlan;
 	/*
 	 * High 24 bits are SRC remote buffer; low 8 bits are flags:
 	 * [7]   SO (strong ordering)
diff --git a/include/linux/netdevice.h b/include/linux/netdevice.h
index 49736a31acaa..fab9a1c2a2ac 100644
--- a/include/linux/netdevice.h
+++ b/include/linux/netdevice.h
@@ -63,6 +63,7 @@ struct wpan_dev;
 struct mpls_dev;
 /* UDP Tunnel offloads */
 struct udp_tunnel_info;
+struct bpf_prog;
 
 void netdev_set_default_ethtool_ops(struct net_device *dev,
 				    const struct ethtool_ops *ops);
@@ -799,6 +800,33 @@ struct tc_to_netdev {
 	};
 };
 
+/* These structures hold the attributes of xdp state that are being passed
+ * to the netdevice through the xdp op.
+ */
+enum xdp_netdev_command {
+	/* Set or clear a bpf program used in the earliest stages of packet
+	 * rx. The prog will have been loaded as BPF_PROG_TYPE_XDP. The callee
+	 * is responsible for calling bpf_prog_put on any old progs that are
+	 * stored. In case of error, the callee need not release the new prog
+	 * reference, but on success it takes ownership and must bpf_prog_put
+	 * when it is no longer used.
+	 */
+	XDP_SETUP_PROG,
+	/* Check if a bpf program is set on the device.  The callee should
+	 * return true if a program is currently attached and running.
+	 */
+	XDP_QUERY_PROG,
+};
+
+struct netdev_xdp {
+	enum xdp_netdev_command command;
+	union {
+		/* XDP_SETUP_PROG */
+		struct bpf_prog *prog;
+		/* XDP_QUERY_PROG */
+		bool prog_attached;
+	};
+};
 
 /*
  * This structure defines the management hooks for network devices.
@@ -1087,6 +1115,9 @@ struct tc_to_netdev {
  *	appropriate rx headroom value allows avoiding skb head copy on
  *	forward. Setting a negative value resets the rx headroom to the
  *	default value.
+ * int (*ndo_xdp)(struct net_device *dev, struct netdev_xdp *xdp);
+ *	This function is used to set or query state related to XDP on the
+ *	netdevice. See definition of enum xdp_netdev_command for details.
  *
  */
 struct net_device_ops {
@@ -1271,6 +1302,8 @@ struct net_device_ops {
 						       struct sk_buff *skb);
 	void			(*ndo_set_rx_headroom)(struct net_device *dev,
 						       int needed_headroom);
+	int			(*ndo_xdp)(struct net_device *dev,
+					   struct netdev_xdp *xdp);
 };
 
 /**
@@ -3257,6 +3290,7 @@ int dev_get_phys_port_id(struct net_device *dev,
 int dev_get_phys_port_name(struct net_device *dev,
 			   char *name, size_t len);
 int dev_change_proto_down(struct net_device *dev, bool proto_down);
+int dev_change_xdp_fd(struct net_device *dev, int fd);
 struct sk_buff *validate_xmit_skb_list(struct sk_buff *skb, struct net_device *dev);
 struct sk_buff *dev_hard_start_xmit(struct sk_buff *skb, struct net_device *dev,
 				    struct netdev_queue *txq, int *ret);