aboutsummaryrefslogtreecommitdiffstats
path: root/include/linux
diff options
context:
space:
mode:
Diffstat (limited to 'include/linux')
-rw-r--r--include/linux/fsl_devices.h18
-rw-r--r--include/linux/init.h13
-rw-r--r--include/linux/usb/cdc.h79
-rw-r--r--include/linux/usb/ch9.h68
-rw-r--r--include/linux/usb/composite.h40
-rw-r--r--include/linux/usb/gadget.h20
-rw-r--r--include/linux/usb/hcd.h2
-rw-r--r--include/linux/usb/intel_mid_otg.h180
-rw-r--r--include/linux/usb/langwell_otg.h139
-rw-r--r--include/linux/usb/ncm.h114
-rw-r--r--include/linux/usb/otg.h11
-rw-r--r--include/linux/usb/storage.h48
-rw-r--r--include/linux/usb_usual.h43
13 files changed, 577 insertions, 198 deletions
diff --git a/include/linux/fsl_devices.h b/include/linux/fsl_devices.h
index 28e33fea5107..4eb56ed75fbc 100644
--- a/include/linux/fsl_devices.h
+++ b/include/linux/fsl_devices.h
@@ -58,17 +58,35 @@ enum fsl_usb2_phy_modes {
FSL_USB2_PHY_SERIAL,
};
+struct clk;
+struct platform_device;
+
struct fsl_usb2_platform_data {
/* board specific information */
enum fsl_usb2_operating_modes operating_mode;
enum fsl_usb2_phy_modes phy_mode;
unsigned int port_enables;
+ unsigned int workaround;
+
+ int (*init)(struct platform_device *);
+ void (*exit)(struct platform_device *);
+ void __iomem *regs; /* ioremap'd register base */
+ struct clk *clk;
+ unsigned big_endian_mmio:1;
+ unsigned big_endian_desc:1;
+ unsigned es:1; /* need USBMODE:ES */
+ unsigned le_setup_buf:1;
+ unsigned have_sysif_regs:1;
+ unsigned invert_drvvbus:1;
+ unsigned invert_pwr_fault:1;
};
/* Flags in fsl_usb2_mph_platform_data */
#define FSL_USB2_PORT0_ENABLED 0x00000001
#define FSL_USB2_PORT1_ENABLED 0x00000002
+#define FLS_USB2_WORKAROUND_ENGCM09152 (1 << 0)
+
struct spi_device;
struct fsl_spi_platform_data {
diff --git a/include/linux/init.h b/include/linux/init.h
index de994304e0bb..577671c55153 100644
--- a/include/linux/init.h
+++ b/include/linux/init.h
@@ -46,16 +46,23 @@
#define __exitdata __section(.exit.data)
#define __exit_call __used __section(.exitcall.exit)
-/* modpost check for section mismatches during the kernel build.
+/*
+ * modpost check for section mismatches during the kernel build.
* A section mismatch happens when there are references from a
* code or data section to an init section (both code or data).
* The init sections are (for most archs) discarded by the kernel
* when early init has completed so all such references are potential bugs.
* For exit sections the same issue exists.
+ *
* The following markers are used for the cases where the reference to
* the *init / *exit section (code or data) is valid and will teach
- * modpost not to issue a warning.
- * The markers follow same syntax rules as __init / __initdata. */
+ * modpost not to issue a warning. Intended semantics is that a code or
+ * data tagged __ref* can reference code or data from init section without
+ * producing a warning (of course, no warning does not mean code is
+ * correct, so optimally document why the __ref is needed and why it's OK).
+ *
+ * The markers follow same syntax rules as __init / __initdata.
+ */
#define __ref __section(.ref.text) noinline
#define __refdata __section(.ref.data)
#define __refconst __section(.ref.rodata)
diff --git a/include/linux/usb/cdc.h b/include/linux/usb/cdc.h
index c117a68d04a7..5e86dc771da4 100644
--- a/include/linux/usb/cdc.h
+++ b/include/linux/usb/cdc.h
@@ -32,6 +32,8 @@
#define USB_CDC_PROTO_EEM 7
+#define USB_CDC_NCM_PROTO_NTB 1
+
/*-------------------------------------------------------------------------*/
/*
@@ -274,13 +276,13 @@ struct usb_cdc_notification {
/*
* Class Specific structures and constants
*
- * CDC NCM parameter structure, CDC NCM subclass 6.2.1
+ * CDC NCM NTB parameters structure, CDC NCM subclass 6.2.1
*
*/
-struct usb_cdc_ncm_ntb_parameter {
+struct usb_cdc_ncm_ntb_parameters {
__le16 wLength;
- __le16 bmNtbFormatSupported;
+ __le16 bmNtbFormatsSupported;
__le32 dwNtbInMaxSize;
__le16 wNdpInDivisor;
__le16 wNdpInPayloadRemainder;
@@ -297,8 +299,8 @@ struct usb_cdc_ncm_ntb_parameter {
* CDC NCM transfer headers, CDC NCM subclass 3.2
*/
-#define NCM_NTH16_SIGN 0x484D434E /* NCMH */
-#define NCM_NTH32_SIGN 0x686D636E /* ncmh */
+#define USB_CDC_NCM_NTH16_SIGN 0x484D434E /* NCMH */
+#define USB_CDC_NCM_NTH32_SIGN 0x686D636E /* ncmh */
struct usb_cdc_ncm_nth16 {
__le32 dwSignature;
@@ -320,25 +322,78 @@ struct usb_cdc_ncm_nth32 {
* CDC NCM datagram pointers, CDC NCM subclass 3.3
*/
-#define NCM_NDP16_CRC_SIGN 0x314D434E /* NCM1 */
-#define NCM_NDP16_NOCRC_SIGN 0x304D434E /* NCM0 */
-#define NCM_NDP32_CRC_SIGN 0x316D636E /* ncm1 */
-#define NCM_NDP32_NOCRC_SIGN 0x306D636E /* ncm0 */
+#define USB_CDC_NCM_NDP16_CRC_SIGN 0x314D434E /* NCM1 */
+#define USB_CDC_NCM_NDP16_NOCRC_SIGN 0x304D434E /* NCM0 */
+#define USB_CDC_NCM_NDP32_CRC_SIGN 0x316D636E /* ncm1 */
+#define USB_CDC_NCM_NDP32_NOCRC_SIGN 0x306D636E /* ncm0 */
+
+/* 16-bit NCM Datagram Pointer Entry */
+struct usb_cdc_ncm_dpe16 {
+ __le16 wDatagramIndex;
+ __le16 wDatagramLength;
+} __attribute__((__packed__));
+/* 16-bit NCM Datagram Pointer Table */
struct usb_cdc_ncm_ndp16 {
__le32 dwSignature;
__le16 wLength;
__le16 wNextFpIndex;
- __u8 data[0];
+ struct usb_cdc_ncm_dpe16 dpe16[0];
} __attribute__ ((packed));
+/* 32-bit NCM Datagram Pointer Entry */
+struct usb_cdc_ncm_dpe32 {
+ __le32 dwDatagramIndex;
+ __le32 dwDatagramLength;
+} __attribute__((__packed__));
+
+/* 32-bit NCM Datagram Pointer Table */
struct usb_cdc_ncm_ndp32 {
__le32 dwSignature;
__le16 wLength;
__le16 wReserved6;
- __le32 dwNextFpIndex;
+ __le32 dwNextNdpIndex;
__le32 dwReserved12;
- __u8 data[0];
+ struct usb_cdc_ncm_dpe32 dpe32[0];
} __attribute__ ((packed));
+/* CDC NCM subclass 3.2.1 and 3.2.2 */
+#define USB_CDC_NCM_NDP16_INDEX_MIN 0x000C
+#define USB_CDC_NCM_NDP32_INDEX_MIN 0x0010
+
+/* CDC NCM subclass 3.3.3 Datagram Formatting */
+#define USB_CDC_NCM_DATAGRAM_FORMAT_CRC 0x30
+#define USB_CDC_NCM_DATAGRAM_FORMAT_NOCRC 0X31
+
+/* CDC NCM subclass 4.2 NCM Communications Interface Protocol Code */
+#define USB_CDC_NCM_PROTO_CODE_NO_ENCAP_COMMANDS 0x00
+#define USB_CDC_NCM_PROTO_CODE_EXTERN_PROTO 0xFE
+
+/* CDC NCM subclass 5.2.1 NCM Functional Descriptor, bmNetworkCapabilities */
+#define USB_CDC_NCM_NCAP_ETH_FILTER (1 << 0)
+#define USB_CDC_NCM_NCAP_NET_ADDRESS (1 << 1)
+#define USB_CDC_NCM_NCAP_ENCAP_COMMAND (1 << 2)
+#define USB_CDC_NCM_NCAP_MAX_DATAGRAM_SIZE (1 << 3)
+#define USB_CDC_NCM_NCAP_CRC_MODE (1 << 4)
+
+/* CDC NCM subclass Table 6-3: NTB Parameter Structure */
+#define USB_CDC_NCM_NTB16_SUPPORTED (1 << 0)
+#define USB_CDC_NCM_NTB32_SUPPORTED (1 << 1)
+
+/* CDC NCM subclass Table 6-3: NTB Parameter Structure */
+#define USB_CDC_NCM_NDP_ALIGN_MIN_SIZE 0x04
+#define USB_CDC_NCM_NTB_MAX_LENGTH 0x1C
+
+/* CDC NCM subclass 6.2.5 SetNtbFormat */
+#define USB_CDC_NCM_NTB16_FORMAT 0x00
+#define USB_CDC_NCM_NTB32_FORMAT 0x01
+
+/* CDC NCM subclass 6.2.7 SetNtbInputSize */
+#define USB_CDC_NCM_NTB_MIN_IN_SIZE 2048
+#define USB_CDC_NCM_NTB_MIN_OUT_SIZE 2048
+
+/* CDC NCM subclass 6.2.11 SetCrcMode */
+#define USB_CDC_NCM_CRC_NOT_APPENDED 0x00
+#define USB_CDC_NCM_CRC_APPENDED 0x01
+
#endif /* __LINUX_USB_CDC_H */
diff --git a/include/linux/usb/ch9.h b/include/linux/usb/ch9.h
index da2ed77d3e8d..f917bbbc8901 100644
--- a/include/linux/usb/ch9.h
+++ b/include/linux/usb/ch9.h
@@ -123,8 +123,23 @@
#define USB_DEVICE_A_ALT_HNP_SUPPORT 5 /* (otg) other RH port does */
#define USB_DEVICE_DEBUG_MODE 6 /* (special devices only) */
+/*
+ * New Feature Selectors as added by USB 3.0
+ * See USB 3.0 spec Table 9-6
+ */
+#define USB_DEVICE_U1_ENABLE 48 /* dev may initiate U1 transition */
+#define USB_DEVICE_U2_ENABLE 49 /* dev may initiate U2 transition */
+#define USB_DEVICE_LTM_ENABLE 50 /* dev may send LTM */
+#define USB_INTRF_FUNC_SUSPEND 0 /* function suspend */
+
+#define USB_INTR_FUNC_SUSPEND_OPT_MASK 0xFF00
+
#define USB_ENDPOINT_HALT 0 /* IN/OUT will STALL */
+/* Bit array elements as returned by the USB_REQ_GET_STATUS request. */
+#define USB_DEV_STAT_U1_ENABLED 2 /* transition into U1 state */
+#define USB_DEV_STAT_U2_ENABLED 3 /* transition into U2 state */
+#define USB_DEV_STAT_LTM_ENABLED 4 /* Latency tolerance messages */
/**
* struct usb_ctrlrequest - SETUP data for a USB device control request
@@ -675,6 +690,7 @@ struct usb_bos_descriptor {
__u8 bNumDeviceCaps;
} __attribute__((packed));
+#define USB_DT_BOS_SIZE 5
/*-------------------------------------------------------------------------*/
/* USB_DT_DEVICE_CAPABILITY: grouped with BOS */
@@ -712,16 +728,56 @@ struct usb_wireless_cap_descriptor { /* Ultra Wide Band */
__u8 bReserved;
} __attribute__((packed));
+/* USB 2.0 Extension descriptor */
#define USB_CAP_TYPE_EXT 2
struct usb_ext_cap_descriptor { /* Link Power Management */
__u8 bLength;
__u8 bDescriptorType;
__u8 bDevCapabilityType;
- __u8 bmAttributes;
+ __le32 bmAttributes;
#define USB_LPM_SUPPORT (1 << 1) /* supports LPM */
} __attribute__((packed));
+#define USB_DT_USB_EXT_CAP_SIZE 7
+
+/*
+ * SuperSpeed USB Capability descriptor: Defines the set of SuperSpeed USB
+ * specific device level capabilities
+ */
+#define USB_SS_CAP_TYPE 3
+struct usb_ss_cap_descriptor { /* Link Power Management */
+ __u8 bLength;
+ __u8 bDescriptorType;
+ __u8 bDevCapabilityType;
+ __u8 bmAttributes;
+#define USB_LTM_SUPPORT (1 << 1) /* supports LTM */
+ __le16 wSpeedSupported;
+#define USB_LOW_SPEED_OPERATION (1) /* Low speed operation */
+#define USB_FULL_SPEED_OPERATION (1 << 1) /* Full speed operation */
+#define USB_HIGH_SPEED_OPERATION (1 << 2) /* High speed operation */
+#define USB_5GBPS_OPERATION (1 << 3) /* Operation at 5Gbps */
+ __u8 bFunctionalitySupport;
+ __u8 bU1devExitLat;
+ __le16 bU2DevExitLat;
+} __attribute__((packed));
+
+#define USB_DT_USB_SS_CAP_SIZE 10
+
+/*
+ * Container ID Capability descriptor: Defines the instance unique ID used to
+ * identify the instance across all operating modes
+ */
+#define CONTAINER_ID_TYPE 4
+struct usb_ss_container_id_descriptor {
+ __u8 bLength;
+ __u8 bDescriptorType;
+ __u8 bDevCapabilityType;
+ __u8 bReserved;
+ __u8 ContainerID[16]; /* 128-bit number */
+} __attribute__((packed));
+
+#define USB_DT_USB_SS_CONTN_ID_SIZE 20
/*-------------------------------------------------------------------------*/
/* USB_DT_WIRELESS_ENDPOINT_COMP: companion descriptor associated with
@@ -808,4 +864,14 @@ enum usb_device_state {
*/
};
+/*-------------------------------------------------------------------------*/
+
+/*
+ * As per USB compliance update, a device that is actively drawing
+ * more than 100mA from USB must report itself as bus-powered in
+ * the GetStatus(DEVICE) call.
+ * http://compliance.usb.org/index.asp?UpdateFile=Electrical&Format=Standard#34
+ */
+#define USB_SELF_POWER_VBUS_MAX_DRAW 100
+
#endif /* __LINUX_USB_CH9_H */
diff --git a/include/linux/usb/composite.h b/include/linux/usb/composite.h
index 617068134ae8..3d29a7dcac2d 100644
--- a/include/linux/usb/composite.h
+++ b/include/linux/usb/composite.h
@@ -161,8 +161,6 @@ ep_choose(struct usb_gadget *g, struct usb_endpoint_descriptor *hs,
* and by language IDs provided in control requests.
* @descriptors: Table of descriptors preceding all function descriptors.
* Examples include OTG and vendor-specific descriptors.
- * @bind: Called from @usb_add_config() to allocate resources unique to this
- * configuration and to call @usb_add_function() for each function used.
* @unbind: Reverses @bind; called as a side effect of unregistering the
* driver which added this configuration.
* @setup: Used to delegate control requests that aren't handled by standard
@@ -207,8 +205,7 @@ struct usb_configuration {
* we can't restructure things to avoid mismatching...
*/
- /* configuration management: bind/unbind */
- int (*bind)(struct usb_configuration *);
+ /* configuration management: unbind/setup */
void (*unbind)(struct usb_configuration *);
int (*setup)(struct usb_configuration *,
const struct usb_ctrlrequest *);
@@ -232,20 +229,24 @@ struct usb_configuration {
};
int usb_add_config(struct usb_composite_dev *,
- struct usb_configuration *);
+ struct usb_configuration *,
+ int (*)(struct usb_configuration *));
/**
* struct usb_composite_driver - groups configurations into a gadget
* @name: For diagnostics, identifies the driver.
+ * @iProduct: Used as iProduct override if @dev->iProduct is not set.
+ * If NULL value of @name is taken.
+ * @iManufacturer: Used as iManufacturer override if @dev->iManufacturer is
+ * not set. If NULL a default "<system> <release> with <udc>" value
+ * will be used.
* @dev: Template descriptor for the device, including default device
* identifiers.
* @strings: tables of strings, keyed by identifiers assigned during bind()
* and language IDs provided in control requests
- * @bind: (REQUIRED) Used to allocate resources that are shared across the
- * whole device, such as string IDs, and add its configurations using
- * @usb_add_config(). This may fail by returning a negative errno
- * value; it should return zero on successful initialization.
- * @unbind: Reverses @bind(); called as a side effect of unregistering
+ * @needs_serial: set to 1 if the gadget needs userspace to provide
+ * a serial number. If one is not provided, warning will be printed.
+ * @unbind: Reverses bind; called as a side effect of unregistering
* this driver.
* @disconnect: optional driver disconnect method
* @suspend: Notifies when the host stops sending USB traffic,
@@ -256,7 +257,7 @@ int usb_add_config(struct usb_composite_dev *,
* Devices default to reporting self powered operation. Devices which rely
* on bus powered operation should report this in their @bind() method.
*
- * Before returning from @bind, various fields in the template descriptor
+ * Before returning from bind, various fields in the template descriptor
* may be overridden. These include the idVendor/idProduct/bcdDevice values
* normally to bind the appropriate host side driver, and the three strings
* (iManufacturer, iProduct, iSerialNumber) normally used to provide user
@@ -266,15 +267,12 @@ int usb_add_config(struct usb_composite_dev *,
*/
struct usb_composite_driver {
const char *name;
+ const char *iProduct;
+ const char *iManufacturer;
const struct usb_device_descriptor *dev;
struct usb_gadget_strings **strings;
+ unsigned needs_serial:1;
- /* REVISIT: bind() functions can be marked __init, which
- * makes trouble for section mismatch analysis. See if
- * we can't restructure things to avoid mismatching...
- */
-
- int (*bind)(struct usb_composite_dev *);
int (*unbind)(struct usb_composite_dev *);
void (*disconnect)(struct usb_composite_dev *);
@@ -284,8 +282,9 @@ struct usb_composite_driver {
void (*resume)(struct usb_composite_dev *);
};
-extern int usb_composite_register(struct usb_composite_driver *);
-extern void usb_composite_unregister(struct usb_composite_driver *);
+extern int usb_composite_probe(struct usb_composite_driver *driver,
+ int (*bind)(struct usb_composite_dev *cdev));
+extern void usb_composite_unregister(struct usb_composite_driver *driver);
/**
@@ -334,6 +333,9 @@ struct usb_composite_dev {
struct list_head configs;
struct usb_composite_driver *driver;
u8 next_string_id;
+ u8 manufacturer_override;
+ u8 product_override;
+ u8 serial_override;
/* the gadget driver won't enable the data pullup
* while the deactivation count is nonzero.
diff --git a/include/linux/usb/gadget.h b/include/linux/usb/gadget.h
index d3ef42d7d2f0..006412ce2303 100644
--- a/include/linux/usb/gadget.h
+++ b/include/linux/usb/gadget.h
@@ -705,11 +705,6 @@ static inline int usb_gadget_disconnect(struct usb_gadget *gadget)
* struct usb_gadget_driver - driver for usb 'slave' devices
* @function: String describing the gadget's function
* @speed: Highest speed the driver handles.
- * @bind: Invoked when the driver is bound to a gadget, usually
- * after registering the driver.
- * At that point, ep0 is fully initialized, and ep_list holds
- * the currently-available endpoints.
- * Called in a context that permits sleeping.
* @setup: Invoked for ep0 control requests that aren't handled by
* the hardware level driver. Most calls must be handled by
* the gadget driver, including descriptor and configuration
@@ -774,7 +769,6 @@ static inline int usb_gadget_disconnect(struct usb_gadget *gadget)
struct usb_gadget_driver {
char *function;
enum usb_device_speed speed;
- int (*bind)(struct usb_gadget *);
void (*unbind)(struct usb_gadget *);
int (*setup)(struct usb_gadget *,
const struct usb_ctrlrequest *);
@@ -798,17 +792,19 @@ struct usb_gadget_driver {
*/
/**
- * usb_gadget_register_driver - register a gadget driver
- * @driver:the driver being registered
+ * usb_gadget_probe_driver - probe a gadget driver
+ * @driver: the driver being registered
+ * @bind: the driver's bind callback
* Context: can sleep
*
* Call this in your gadget driver's module initialization function,
* to tell the underlying usb controller driver about your driver.
- * The driver's bind() function will be called to bind it to a
- * gadget before this registration call returns. It's expected that
- * the bind() functions will be in init sections.
+ * The @bind() function will be called to bind it to a gadget before this
+ * registration call returns. It's expected that the @bind() function will
+ * be in init sections.
*/
-int usb_gadget_register_driver(struct usb_gadget_driver *driver);
+int usb_gadget_probe_driver(struct usb_gadget_driver *driver,
+ int (*bind)(struct usb_gadget *));
/**
* usb_gadget_unregister_driver - unregister a gadget driver
diff --git a/include/linux/usb/hcd.h b/include/linux/usb/hcd.h
index 3b571f1ffbb3..0b6e751ea0b1 100644
--- a/include/linux/usb/hcd.h
+++ b/include/linux/usb/hcd.h
@@ -329,6 +329,8 @@ extern int usb_hcd_submit_urb(struct urb *urb, gfp_t mem_flags);
extern int usb_hcd_unlink_urb(struct urb *urb, int status);
extern void usb_hcd_giveback_urb(struct usb_hcd *hcd, struct urb *urb,
int status);
+extern void unmap_urb_setup_for_dma(struct usb_hcd *, struct urb *);
+extern void unmap_urb_for_dma(struct usb_hcd *, struct urb *);
extern void usb_hcd_flush_endpoint(struct usb_device *udev,
struct usb_host_endpoint *ep);
extern void usb_hcd_disable_endpoint(struct usb_device *udev,
diff --git a/include/linux/usb/intel_mid_otg.h b/include/linux/usb/intel_mid_otg.h
new file mode 100644
index 000000000000..a0ccf795f362
--- /dev/null
+++ b/include/linux/usb/intel_mid_otg.h
@@ -0,0 +1,180 @@
+/*
+ * Intel MID (Langwell/Penwell) USB OTG Transceiver driver
+ * Copyright (C) 2008 - 2010, Intel Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
+ *
+ */
+
+#ifndef __INTEL_MID_OTG_H
+#define __INTEL_MID_OTG_H
+
+#include <linux/pm.h>
+#include <linux/usb/otg.h>
+#include <linux/notifier.h>
+
+struct intel_mid_otg_xceiv;
+
+/* This is a common data structure for Intel MID platform to
+ * save values of the OTG state machine */
+struct otg_hsm {
+ /* Input */
+ int a_bus_resume;
+ int a_bus_suspend;
+ int a_conn;
+ int a_sess_vld;
+ int a_srp_det;
+ int a_vbus_vld;
+ int b_bus_resume;
+ int b_bus_suspend;
+ int b_conn;
+ int b_se0_srp;
+ int b_ssend_srp;
+ int b_sess_end;
+ int b_sess_vld;
+ int id;
+/* id values */
+#define ID_B 0x05
+#define ID_A 0x04
+#define ID_ACA_C 0x03
+#define ID_ACA_B 0x02
+#define ID_ACA_A 0x01
+ int power_up;
+ int adp_change;
+ int test_device;
+
+ /* Internal variables */
+ int a_set_b_hnp_en;
+ int b_srp_done;
+ int b_hnp_enable;
+ int hnp_poll_enable;
+
+ /* Timeout indicator for timers */
+ int a_wait_vrise_tmout;
+ int a_wait_bcon_tmout;
+ int a_aidl_bdis_tmout;
+ int a_bidl_adis_tmout;
+ int a_bidl_adis_tmr;
+ int a_wait_vfall_tmout;
+ int b_ase0_brst_tmout;
+ int b_bus_suspend_tmout;
+ int b_srp_init_tmout;
+ int b_srp_fail_tmout;
+ int b_srp_fail_tmr;
+ int b_adp_sense_tmout;
+
+ /* Informative variables */
+ int a_bus_drop;
+ int a_bus_req;
+ int a_clr_err;
+ int b_bus_req;
+ int a_suspend_req;
+ int b_bus_suspend_vld;
+
+ /* Output */
+ int drv_vbus;
+ int loc_conn;
+ int loc_sof;
+
+ /* Others */
+ int vbus_srp_up;
+};
+
+/* must provide ULPI access function to read/write registers implemented in
+ * ULPI address space */
+struct iotg_ulpi_access_ops {
+ int (*read)(struct intel_mid_otg_xceiv *iotg, u8 reg, u8 *val);
+ int (*write)(struct intel_mid_otg_xceiv *iotg, u8 reg, u8 val);
+};
+
+#define OTG_A_DEVICE 0x0
+#define OTG_B_DEVICE 0x1
+
+/*
+ * the Intel MID (Langwell/Penwell) otg transceiver driver needs to interact
+ * with device and host drivers to implement the USB OTG related feature. More
+ * function members are added based on otg_transceiver data structure for this
+ * purpose.
+ */
+struct intel_mid_otg_xceiv {
+ struct otg_transceiver otg;
+ struct otg_hsm hsm;
+
+ /* base address */
+ void __iomem *base;
+
+ /* ops to access ulpi */
+ struct iotg_ulpi_access_ops ulpi_ops;
+
+ /* atomic notifier for interrupt context */
+ struct atomic_notifier_head iotg_notifier;
+
+ /* start/stop USB Host function */
+ int (*start_host)(struct intel_mid_otg_xceiv *iotg);
+ int (*stop_host)(struct intel_mid_otg_xceiv *iotg);
+
+ /* start/stop USB Peripheral function */
+ int (*start_peripheral)(struct intel_mid_otg_xceiv *iotg);
+ int (*stop_peripheral)(struct intel_mid_otg_xceiv *iotg);
+
+ /* start/stop ADP sense/probe function */
+ int (*set_adp_probe)(struct intel_mid_otg_xceiv *iotg,
+ bool enabled, int dev);
+ int (*set_adp_sense)(struct intel_mid_otg_xceiv *iotg,
+ bool enabled);
+
+#ifdef CONFIG_PM
+ /* suspend/resume USB host function */
+ int (*suspend_host)(struct intel_mid_otg_xceiv *iotg,
+ pm_message_t message);
+ int (*resume_host)(struct intel_mid_otg_xceiv *iotg);
+
+ int (*suspend_peripheral)(struct intel_mid_otg_xceiv *iotg,
+ pm_message_t message);
+ int (*resume_peripheral)(struct intel_mid_otg_xceiv *iotg);
+#endif
+
+};
+static inline
+struct intel_mid_otg_xceiv *otg_to_mid_xceiv(struct otg_transceiver *otg)
+{
+ return container_of(otg, struct intel_mid_otg_xceiv, otg);
+}
+
+#define MID_OTG_NOTIFY_CONNECT 0x0001
+#define MID_OTG_NOTIFY_DISCONN 0x0002
+#define MID_OTG_NOTIFY_HSUSPEND 0x0003
+#define MID_OTG_NOTIFY_HRESUME 0x0004
+#define MID_OTG_NOTIFY_CSUSPEND 0x0005
+#define MID_OTG_NOTIFY_CRESUME 0x0006
+#define MID_OTG_NOTIFY_HOSTADD 0x0007
+#define MID_OTG_NOTIFY_HOSTREMOVE 0x0008
+#define MID_OTG_NOTIFY_CLIENTADD 0x0009
+#define MID_OTG_NOTIFY_CLIENTREMOVE 0x000a
+
+static inline int
+intel_mid_otg_register_notifier(struct intel_mid_otg_xceiv *iotg,
+ struct notifier_block *nb)
+{
+ return atomic_notifier_chain_register(&iotg->iotg_notifier, nb);
+}
+
+static inline void
+intel_mid_otg_unregister_notifier(struct intel_mid_otg_xceiv *iotg,
+ struct notifier_block *nb)
+{
+ atomic_notifier_chain_unregister(&iotg->iotg_notifier, nb);
+}
+
+#endif /* __INTEL_MID_OTG_H */
diff --git a/include/linux/usb/langwell_otg.h b/include/linux/usb/langwell_otg.h
new file mode 100644
index 000000000000..51f17b16d312
--- /dev/null
+++ b/include/linux/usb/langwell_otg.h
@@ -0,0 +1,139 @@
+/*
+ * Intel Langwell USB OTG transceiver driver
+ * Copyright (C) 2008 - 2010, Intel Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
+ *
+ */
+
+#ifndef __LANGWELL_OTG_H
+#define __LANGWELL_OTG_H
+
+#include <linux/usb/intel_mid_otg.h>
+
+#define CI_USBCMD 0x30
+# define USBCMD_RST BIT(1)
+# define USBCMD_RS BIT(0)
+#define CI_USBSTS 0x34
+# define USBSTS_SLI BIT(8)
+# define USBSTS_URI BIT(6)
+# define USBSTS_PCI BIT(2)
+#define CI_PORTSC1 0x74
+# define PORTSC_PP BIT(12)
+# define PORTSC_LS (BIT(11) | BIT(10))
+# define PORTSC_SUSP BIT(7)
+# define PORTSC_CCS BIT(0)
+#define CI_HOSTPC1 0xb4
+# define HOSTPC1_PHCD BIT(22)
+#define CI_OTGSC 0xf4
+# define OTGSC_DPIE BIT(30)
+# define OTGSC_1MSE BIT(29)
+# define OTGSC_BSEIE BIT(28)
+# define OTGSC_BSVIE BIT(27)
+# define OTGSC_ASVIE BIT(26)
+# define OTGSC_AVVIE BIT(25)
+# define OTGSC_IDIE BIT(24)
+# define OTGSC_DPIS BIT(22)
+# define OTGSC_1MSS BIT(21)
+# define OTGSC_BSEIS BIT(20)
+# define OTGSC_BSVIS BIT(19)
+# define OTGSC_ASVIS BIT(18)
+# define OTGSC_AVVIS BIT(17)
+# define OTGSC_IDIS BIT(16)
+# define OTGSC_DPS BIT(14)
+# define OTGSC_1MST BIT(13)
+# define OTGSC_BSE BIT(12)
+# define OTGSC_BSV BIT(11)
+# define OTGSC_ASV BIT(10)
+# define OTGSC_AVV BIT(9)
+# define OTGSC_ID BIT(8)
+# define OTGSC_HABA BIT(7)
+# define OTGSC_HADP BIT(6)
+# define OTGSC_IDPU BIT(5)
+# define OTGSC_DP BIT(4)
+# define OTGSC_OT BIT(3)
+# define OTGSC_HAAR BIT(2)
+# define OTGSC_VC BIT(1)
+# define OTGSC_VD BIT(0)
+# define OTGSC_INTEN_MASK (0x7f << 24)
+# define OTGSC_INT_MASK (0x5f << 24)
+# define OTGSC_INTSTS_MASK (0x7f << 16)
+#define CI_USBMODE 0xf8
+# define USBMODE_CM (BIT(1) | BIT(0))
+# define USBMODE_IDLE 0
+# define USBMODE_DEVICE 0x2
+# define USBMODE_HOST 0x3
+#define USBCFG_ADDR 0xff10801c
+#define USBCFG_LEN 4
+# define USBCFG_VBUSVAL BIT(14)
+# define USBCFG_AVALID BIT(13)
+# define USBCFG_BVALID BIT(12)
+# define USBCFG_SESEND BIT(11)
+
+#define INTR_DUMMY_MASK (USBSTS_SLI | USBSTS_URI | USBSTS_PCI)
+
+enum langwell_otg_timer_type {
+ TA_WAIT_VRISE_TMR,
+ TA_WAIT_BCON_TMR,
+ TA_AIDL_BDIS_TMR,
+ TB_ASE0_BRST_TMR,
+ TB_SE0_SRP_TMR,
+ TB_SRP_INIT_TMR,
+ TB_SRP_FAIL_TMR,
+ TB_BUS_SUSPEND_TMR
+};
+
+#define TA_WAIT_VRISE 100
+#define TA_WAIT_BCON 30000
+#define TA_AIDL_BDIS 15000
+#define TB_ASE0_BRST 5000
+#define TB_SE0_SRP 2
+#define TB_SRP_INIT 100
+#define TB_SRP_FAIL 5500
+#define TB_BUS_SUSPEND 500
+
+struct langwell_otg_timer {
+ unsigned long expires; /* Number of count increase to timeout */
+ unsigned long count; /* Tick counter */
+ void (*function)(unsigned long); /* Timeout function */
+ unsigned long data; /* Data passed to function */
+ struct list_head list;
+};
+
+struct langwell_otg {
+ struct intel_mid_otg_xceiv iotg;
+ struct device *dev;
+
+ void __iomem *usbcfg; /* SCCBUSB config Reg */
+
+ unsigned region;
+ unsigned cfg_region;
+
+ struct work_struct work;
+ struct workqueue_struct *qwork;
+ struct timer_list hsm_timer;
+
+ spinlock_t lock;
+ spinlock_t wq_lock;
+
+ struct notifier_block iotg_notifier;
+};
+
+static inline
+struct langwell_otg *mid_xceiv_to_lnw(struct intel_mid_otg_xceiv *iotg)
+{
+ return container_of(iotg, struct langwell_otg, iotg);
+}
+
+#endif /* __LANGWELL_OTG_H__ */
diff --git a/include/linux/usb/ncm.h b/include/linux/usb/ncm.h
deleted file mode 100644
index 006d1064c8b2..000000000000
--- a/include/linux/usb/ncm.h
+++ /dev/null
@@ -1,114 +0,0 @@
-/*
- * USB CDC NCM auxiliary definitions
- */
-
-#ifndef __LINUX_USB_NCM_H
-#define __LINUX_USB_NCM_H
-
-#include <linux/types.h>
-#include <linux/usb/cdc.h>
-#include <asm/unaligned.h>
-
-#define NCM_NTB_MIN_IN_SIZE 2048
-#define NCM_NTB_MIN_OUT_SIZE 2048
-
-#define NCM_CONTROL_TIMEOUT (5 * 1000)
-
-/* bmNetworkCapabilities */
-
-#define NCM_NCAP_ETH_FILTER (1 << 0)
-#define NCM_NCAP_NET_ADDRESS (1 << 1)
-#define NCM_NCAP_ENCAP_COMM (1 << 2)
-#define NCM_NCAP_MAX_DGRAM (1 << 3)
-#define NCM_NCAP_CRC_MODE (1 << 4)
-
-/*
- * Here are options for NCM Datagram Pointer table (NDP) parser.
- * There are 2 different formats: NDP16 and NDP32 in the spec (ch. 3),
- * in NDP16 offsets and sizes fields are 1 16bit word wide,
- * in NDP32 -- 2 16bit words wide. Also signatures are different.
- * To make the parser code the same, put the differences in the structure,
- * and switch pointers to the structures when the format is changed.
- */
-
-struct ndp_parser_opts {
- u32 nth_sign;
- u32 ndp_sign;
- unsigned nth_size;
- unsigned ndp_size;
- unsigned ndplen_align;
- /* sizes in u16 units */
- unsigned dgram_item_len; /* index or length */
- unsigned block_length;
- unsigned fp_index;
- unsigned reserved1;
- unsigned reserved2;
- unsigned next_fp_index;
-};
-
-#define INIT_NDP16_OPTS { \
- .nth_sign = NCM_NTH16_SIGN, \
- .ndp_sign = NCM_NDP16_NOCRC_SIGN, \
- .nth_size = sizeof(struct usb_cdc_ncm_nth16), \
- .ndp_size = sizeof(struct usb_cdc_ncm_ndp16), \
- .ndplen_align = 4, \
- .dgram_item_len = 1, \
- .block_length = 1, \
- .fp_index = 1, \
- .reserved1 = 0, \
- .reserved2 = 0, \
- .next_fp_index = 1, \
- }
-
-
-#define INIT_NDP32_OPTS { \
- .nth_sign = NCM_NTH32_SIGN, \
- .ndp_sign = NCM_NDP32_NOCRC_SIGN, \
- .nth_size = sizeof(struct usb_cdc_ncm_nth32), \
- .ndp_size = sizeof(struct usb_cdc_ncm_ndp32), \
- .ndplen_align = 8, \
- .dgram_item_len = 2, \
- .block_length = 2, \
- .fp_index = 2, \
- .reserved1 = 1, \
- .reserved2 = 2, \
- .next_fp_index = 2, \
- }
-
-static inline void put_ncm(__le16 **p, unsigned size, unsigned val)
-{
- switch (size) {
- case 1:
- put_unaligned_le16((u16)val, *p);
- break;
- case 2:
- put_unaligned_le32((u32)val, *p);
-
- break;
- default:
- BUG();
- }
-
- *p += size;
-}
-
-static inline unsigned get_ncm(__le16 **p, unsigned size)
-{
- unsigned tmp;
-
- switch (size) {
- case 1:
- tmp = get_unaligned_le16(*p);
- break;
- case 2:
- tmp = get_unaligned_le32(*p);
- break;
- default:
- BUG();
- }
-
- *p += size;
- return tmp;
-}
-
-#endif /* __LINUX_USB_NCM_H */
diff --git a/include/linux/usb/otg.h b/include/linux/usb/otg.h
index 545cba73ccaf..0a5b3711e502 100644
--- a/include/linux/usb/otg.h
+++ b/include/linux/usb/otg.h
@@ -164,8 +164,19 @@ otg_shutdown(struct otg_transceiver *otg)
}
/* for usb host and peripheral controller drivers */
+#ifdef CONFIG_USB_OTG_UTILS
extern struct otg_transceiver *otg_get_transceiver(void);
extern void otg_put_transceiver(struct otg_transceiver *);
+#else
+static inline struct otg_transceiver *otg_get_transceiver(void)
+{
+ return NULL;
+}
+
+static inline void otg_put_transceiver(struct otg_transceiver *x)
+{
+}
+#endif
/* Context: can sleep */
static inline int
diff --git a/include/linux/usb/storage.h b/include/linux/usb/storage.h
new file mode 100644
index 000000000000..d7fc910f1dc4
--- /dev/null
+++ b/include/linux/usb/storage.h
@@ -0,0 +1,48 @@
+#ifndef __LINUX_USB_STORAGE_H
+#define __LINUX_USB_STORAGE_H
+
+/*
+ * linux/usb/storage.h
+ *
+ * Copyright Matthew Wilcox for Intel Corp, 2010
+ *
+ * This file contains definitions taken from the
+ * USB Mass Storage Class Specification Overview
+ *
+ * Distributed under the terms of the GNU GPL, version two.
+ */
+
+/* Storage subclass codes */
+
+#define USB_SC_RBC 0x01 /* Typically, flash devices */
+#define USB_SC_8020 0x02 /* CD-ROM */
+#define USB_SC_QIC 0x03 /* QIC-157 Tapes */
+#define USB_SC_UFI 0x04 /* Floppy */
+#define USB_SC_8070 0x05 /* Removable media */
+#define USB_SC_SCSI 0x06 /* Transparent */
+#define USB_SC_LOCKABLE 0x07 /* Password-protected */
+
+#define USB_SC_ISD200 0xf0 /* ISD200 ATA */
+#define USB_SC_CYP_ATACB 0xf1 /* Cypress ATACB */
+#define USB_SC_DEVICE 0xff /* Use device's value */
+
+/* Storage protocol codes */
+
+#define USB_PR_CBI 0x00 /* Control/Bulk/Interrupt */
+#define USB_PR_CB 0x01 /* Control/Bulk w/o interrupt */
+#define USB_PR_BULK 0x50 /* bulk only */
+#define USB_PR_UAS 0x62 /* USB Attached SCSI */
+
+#define USB_PR_USBAT 0x80 /* SCM-ATAPI bridge */
+#define USB_PR_EUSB_SDDR09 0x81 /* SCM-SCSI bridge for SDDR-09 */
+#define USB_PR_SDDR55 0x82 /* SDDR-55 (made up) */
+#define USB_PR_DPCM_USB 0xf0 /* Combination CB/SDDR09 */
+#define USB_PR_FREECOM 0xf1 /* Freecom */
+#define USB_PR_DATAFAB 0xf2 /* Datafab chipsets */
+#define USB_PR_JUMPSHOT 0xf3 /* Lexar Jumpshot */
+#define USB_PR_ALAUDA 0xf4 /* Alauda chipsets */
+#define USB_PR_KARMA 0xf5 /* Rio Karma */
+
+#define USB_PR_DEVICE 0xff /* Use device's value */
+
+#endif
diff --git a/include/linux/usb_usual.h b/include/linux/usb_usual.h
index a4b947e470a5..71693d4a4fe1 100644
--- a/include/linux/usb_usual.h
+++ b/include/linux/usb_usual.h
@@ -58,7 +58,11 @@
US_FLAG(CAPACITY_OK, 0x00010000) \
/* READ CAPACITY response is correct */ \
US_FLAG(BAD_SENSE, 0x00020000) \
- /* Bad Sense (never more than 18 bytes) */
+ /* Bad Sense (never more than 18 bytes) */ \
+ US_FLAG(NO_READ_DISC_INFO, 0x00040000) \
+ /* cannot handle READ_DISC_INFO */ \
+ US_FLAG(NO_READ_CAPACITY_16, 0x00080000) \
+ /* cannot handle READ_CAPACITY_16 */
#define US_FLAG(name, value) US_FL_##name = value ,
enum { US_DO_ALL_FLAGS };
@@ -74,42 +78,7 @@ enum { US_DO_ALL_FLAGS };
#define USB_US_TYPE(flags) (((flags) >> 24) & 0xFF)
#define USB_US_ORIG_FLAGS(flags) ((flags) & 0x00FFFFFF)
-/*
- * This is probably not the best place to keep these constants, conceptually.
- * But it's the only header included into all places which need them.
- */
-
-/* Sub Classes */
-
-#define US_SC_RBC 0x01 /* Typically, flash devices */
-#define US_SC_8020 0x02 /* CD-ROM */
-#define US_SC_QIC 0x03 /* QIC-157 Tapes */
-#define US_SC_UFI 0x04 /* Floppy */
-#define US_SC_8070 0x05 /* Removable media */
-#define US_SC_SCSI 0x06 /* Transparent */
-#define US_SC_LOCKABLE 0x07 /* Password-protected */
-
-#define US_SC_ISD200 0xf0 /* ISD200 ATA */
-#define US_SC_CYP_ATACB 0xf1 /* Cypress ATACB */
-#define US_SC_DEVICE 0xff /* Use device's value */
-
-/* Protocols */
-
-#define US_PR_CBI 0x00 /* Control/Bulk/Interrupt */
-#define US_PR_CB 0x01 /* Control/Bulk w/o interrupt */
-#define US_PR_BULK 0x50 /* bulk only */
-
-#define US_PR_USBAT 0x80 /* SCM-ATAPI bridge */
-#define US_PR_EUSB_SDDR09 0x81 /* SCM-SCSI bridge for SDDR-09 */
-#define US_PR_SDDR55 0x82 /* SDDR-55 (made up) */
-#define US_PR_DPCM_USB 0xf0 /* Combination CB/SDDR09 */
-#define US_PR_FREECOM 0xf1 /* Freecom */
-#define US_PR_DATAFAB 0xf2 /* Datafab chipsets */
-#define US_PR_JUMPSHOT 0xf3 /* Lexar Jumpshot */
-#define US_PR_ALAUDA 0xf4 /* Alauda chipsets */
-#define US_PR_KARMA 0xf5 /* Rio Karma */
-
-#define US_PR_DEVICE 0xff /* Use device's value */
+#include <linux/usb/storage.h>
/*
*/