1 files changed, 0 insertions, 214 deletions
diff --git a/include/media/ir-core.h b/include/media/ir-core.h
deleted file mode 100644
index 6dc37fae6606..000000000000
--- a/include/media/ir-core.h
+++ /dev/null
@@ -1,214 +0,0 @@
-/*
- * Remote Controller core header
- *
- * Copyright (C) 2009-2010 by Mauro Carvalho Chehab <mchehab@redhat.com>
- *
- * This program is free software; you can redistribute it and/or modify
- *  it under the terms of the GNU General Public License as published by
- *  the Free Software Foundation version 2 of the License.
- *
- *  This program is distributed in the hope that it will be useful,
- *  but WITHOUT ANY WARRANTY; without even the implied warranty of
- *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *  GNU General Public License for more details.
- */
-
-#ifndef _IR_CORE
-#define _IR_CORE
-
-#include <linux/spinlock.h>
-#include <linux/kfifo.h>
-#include <linux/time.h>
-#include <linux/timer.h>
-#include <media/rc-map.h>
-
-extern int ir_core_debug;
-#define IR_dprintk(level, fmt, arg...)	if (ir_core_debug >= level) \
-	printk(KERN_DEBUG "%s: " fmt , __func__, ## arg)
-
-enum rc_driver_type {
-	RC_DRIVER_SCANCODE = 0,	/* Driver or hardware generates a scancode */
-	RC_DRIVER_IR_RAW,	/* Needs a Infra-Red pulse/space decoder */
-};
-
-/**
- * struct ir_dev_props - Allow caller drivers to set special properties
- * @driver_type: specifies if the driver or hardware have already a decoder,
- *	or if it needs to use the IR raw event decoders to produce a scancode
- * @allowed_protos: bitmask with the supported IR_TYPE_* protocols
- * @scanmask: some hardware decoders are not capable of providing the full
- *	scancode to the application. As this is a hardware limit, we can't do
- *	anything with it. Yet, as the same keycode table can be used with other
- *	devices, a mask is provided to allow its usage. Drivers should generally
- *	leave this field in blank
- * @timeout: optional time after which device stops sending data
- * @min_timeout: minimum timeout supported by device
- * @max_timeout: maximum timeout supported by device
- * @rx_resolution : resolution (in ns) of input sampler
- * @tx_resolution: resolution (in ns) of output sampler
- * @priv: driver-specific data, to be used on the callbacks
- * @change_protocol: allow changing the protocol used on hardware decoders
- * @open: callback to allow drivers to enable polling/irq when IR input device
- *	is opened.
- * @close: callback to allow drivers to disable polling/irq when IR input device
- *	is opened.
- * @s_tx_mask: set transmitter mask (for devices with multiple tx outputs)
- * @s_tx_carrier: set transmit carrier frequency
- * @s_tx_duty_cycle: set transmit duty cycle (0% - 100%)
- * @s_rx_carrier: inform driver about carrier it is expected to handle
- * @tx_ir: transmit IR
- * @s_idle: optional: enable/disable hardware idle mode, upon which,
-	device doesn't interrupt host until it sees IR pulses
- * @s_learning_mode: enable wide band receiver used for learning
- * @s_carrier_report: enable carrier reports
- */
-struct ir_dev_props {
-	enum rc_driver_type	driver_type;
-	unsigned long		allowed_protos;
-	u32			scanmask;
-
-	u32			timeout;
-	u32			min_timeout;
-	u32			max_timeout;
-
-	u32			rx_resolution;
-	u32			tx_resolution;
-
-	void			*priv;
-	int			(*change_protocol)(void *priv, u64 ir_type);
-	int			(*open)(void *priv);
-	void			(*close)(void *priv);
-	int			(*s_tx_mask)(void *priv, u32 mask);
-	int			(*s_tx_carrier)(void *priv, u32 carrier);
-	int			(*s_tx_duty_cycle)(void *priv, u32 duty_cycle);
-	int			(*s_rx_carrier_range)(void *priv, u32 min, u32 max);
-	int			(*tx_ir)(void *priv, int *txbuf, u32 n);
-	void			(*s_idle)(void *priv, bool enable);
-	int			(*s_learning_mode)(void *priv, int enable);
-	int			(*s_carrier_report) (void *priv, int enable);
-};
-
-struct ir_input_dev {
-	struct device			dev;		/* device */
-	char				*driver_name;	/* Name of the driver module */
-	struct ir_scancode_table	rc_tab;		/* scan/key table */
-	unsigned long			devno;		/* device number */
-	struct ir_dev_props		*props;		/* Device properties */
-	struct ir_raw_event_ctrl	*raw;		/* for raw pulse/space events */
-	struct input_dev		*input_dev;	/* the input device associated with this device */
-	bool				idle;
-
-	/* key info - needed by IR keycode handlers */
-	spinlock_t			keylock;	/* protects the below members */
-	bool				keypressed;	/* current state */
-	unsigned long			keyup_jiffies;	/* when should the current keypress be released? */
-	struct timer_list		timer_keyup;	/* timer for releasing a keypress */
-	u32				last_keycode;	/* keycode of last command */
-	u32				last_scancode;	/* scancode of last command */
-	u8				last_toggle;	/* toggle of last command */
-};
-
-enum raw_event_type {
-	IR_SPACE        = (1 << 0),
-	IR_PULSE        = (1 << 1),
-	IR_START_EVENT  = (1 << 2),
-	IR_STOP_EVENT   = (1 << 3),
-};
-
-#define to_ir_input_dev(_attr) container_of(_attr, struct ir_input_dev, attr)
-
-/* From ir-keytable.c */
-int __ir_input_register(struct input_dev *dev,
-		      const struct ir_scancode_table *ir_codes,
-		      struct ir_dev_props *props,
-		      const char *driver_name);
-
-static inline int ir_input_register(struct input_dev *dev,
-		      const char *map_name,
-		      struct ir_dev_props *props,
-		      const char *driver_name) {
-	struct ir_scancode_table *ir_codes;
-	struct ir_input_dev *ir_dev;
-	int rc;
-
-	if (!map_name)
-		return -EINVAL;
-
-	ir_codes = get_rc_map(map_name);
-	if (!ir_codes) {
-		ir_codes = get_rc_map(RC_MAP_EMPTY);
-
-		if (!ir_codes)
-			return -EINVAL;
-	}
-
-	rc = __ir_input_register(dev, ir_codes, props, driver_name);
-	if (rc < 0)
-		return -EINVAL;
-
-	ir_dev = input_get_drvdata(dev);
-
-	if (!rc && ir_dev->props && ir_dev->props->change_protocol)
-		rc = ir_dev->props->change_protocol(ir_dev->props->priv,
-						    ir_codes->ir_type);
-
-	return rc;
-}
-
-void ir_input_unregister(struct input_dev *input_dev);
-
-void ir_repeat(struct input_dev *dev);
-void ir_keydown(struct input_dev *dev, int scancode, u8 toggle);
-void ir_keyup(struct ir_input_dev *ir);
-u32 ir_g_keycode_from_table(struct input_dev *input_dev, u32 scancode);
-
-/* From ir-raw-event.c */
-
-struct ir_raw_event {
-	union {
-		u32             duration;
-
-		struct {
-			u32     carrier;
-			u8      duty_cycle;
-		};
-	};
-
-	unsigned                pulse:1;
-	unsigned                reset:1;
-	unsigned                timeout:1;
-	unsigned                carrier_report:1;
-};
-
-#define DEFINE_IR_RAW_EVENT(event) \
-	struct ir_raw_event event = { \
-		{ .duration = 0 } , \
-		.pulse = 0, \
-		.reset = 0, \
-		.timeout = 0, \
-		.carrier_report = 0 }
-
-static inline void init_ir_raw_event(struct ir_raw_event *ev)
-{
-	memset(ev, 0, sizeof(*ev));
-}
-
-#define IR_MAX_DURATION         0xFFFFFFFF      /* a bit more than 4 seconds */
-
-void ir_raw_event_handle(struct input_dev *input_dev);
-int ir_raw_event_store(struct input_dev *input_dev, struct ir_raw_event *ev);
-int ir_raw_event_store_edge(struct input_dev *input_dev, enum raw_event_type type);
-int ir_raw_event_store_with_filter(struct input_dev *input_dev,
-				struct ir_raw_event *ev);
-void ir_raw_event_set_idle(struct input_dev *input_dev, bool idle);
-
-static inline void ir_raw_event_reset(struct input_dev *input_dev)
-{
-	DEFINE_IR_RAW_EVENT(ev);
-	ev.reset = true;
-
-	ir_raw_event_store(input_dev, &ev);
-	ir_raw_event_handle(input_dev);
-}
-
-#endif /* _IR_CORE */