diff options
Diffstat (limited to '')
| -rw-r--r-- | include/net/cfg80211.h | 150 |
1 files changed, 127 insertions, 23 deletions
diff --git a/include/net/cfg80211.h b/include/net/cfg80211.h index 0d6f7ec86061..911fae42b0c0 100644 --- a/include/net/cfg80211.h +++ b/include/net/cfg80211.h @@ -1460,6 +1460,7 @@ int cfg80211_check_station_change(struct wiphy *wiphy, * @RATE_INFO_FLAGS_DMG: 60GHz MCS * @RATE_INFO_FLAGS_HE_MCS: HE MCS information * @RATE_INFO_FLAGS_EDMG: 60GHz MCS in EDMG mode + * @RATE_INFO_FLAGS_EXTENDED_SC_DMG: 60GHz extended SC MCS */ enum rate_info_flags { RATE_INFO_FLAGS_MCS = BIT(0), @@ -1468,6 +1469,7 @@ enum rate_info_flags { RATE_INFO_FLAGS_DMG = BIT(3), RATE_INFO_FLAGS_HE_MCS = BIT(4), RATE_INFO_FLAGS_EDMG = BIT(5), + RATE_INFO_FLAGS_EXTENDED_SC_DMG = BIT(6), }; /** @@ -2581,12 +2583,14 @@ struct cfg80211_auth_request { * authentication capability. Drivers can offload authentication to * userspace if this flag is set. Only applicable for cfg80211_connect() * request (connect callback). + * @ASSOC_REQ_DISABLE_HE: Disable HE */ enum cfg80211_assoc_req_flags { ASSOC_REQ_DISABLE_HT = BIT(0), ASSOC_REQ_DISABLE_VHT = BIT(1), ASSOC_REQ_USE_RRM = BIT(2), CONNECT_REQ_EXTERNAL_AUTH_SUPPORT = BIT(3), + ASSOC_REQ_DISABLE_HE = BIT(4), }; /** @@ -3630,9 +3634,10 @@ struct mgmt_frame_regs { * All callbacks except where otherwise noted should return 0 * on success or a negative error code. * - * All operations are currently invoked under rtnl for consistency with the - * wireless extensions but this is subject to reevaluation as soon as this - * code is used more widely and we have a first user without wext. + * All operations are invoked with the wiphy mutex held. The RTNL may be + * held in addition (due to wireless extensions) but this cannot be relied + * upon except in cases where documented below. Note that due to ordering, + * the RTNL also cannot be acquired in any handlers. * * @suspend: wiphy device needs to be suspended. The variable @wow will * be %NULL or contain the enabled Wake-on-Wireless triggers that are @@ -3647,11 +3652,14 @@ struct mgmt_frame_regs { * the new netdev in the wiphy's network namespace! Returns the struct * wireless_dev, or an ERR_PTR. For P2P device wdevs, the driver must * also set the address member in the wdev. + * This additionally holds the RTNL to be able to do netdev changes. * * @del_virtual_intf: remove the virtual interface + * This additionally holds the RTNL to be able to do netdev changes. * * @change_virtual_intf: change type/configuration of virtual interface, * keep the struct wireless_dev's iftype updated. + * This additionally holds the RTNL to be able to do netdev changes. * * @add_key: add a key with the given parameters. @mac_addr will be %NULL * when adding a group key. @@ -4741,6 +4749,7 @@ struct wiphy_iftype_akm_suites { /** * struct wiphy - wireless hardware description + * @mtx: mutex for the data (structures) of this device * @reg_notifier: the driver's regulatory notification callback, * note that if your driver uses wiphy_apply_custom_regulatory() * the reg_notifier's request can be passed as NULL @@ -4934,6 +4943,8 @@ struct wiphy_iftype_akm_suites { * @sar_capa: SAR control capabilities */ struct wiphy { + struct mutex mtx; + /* assign these fields before you register the wiphy */ u8 perm_addr[ETH_ALEN]; @@ -5186,6 +5197,37 @@ static inline struct wiphy *wiphy_new(const struct cfg80211_ops *ops, */ int wiphy_register(struct wiphy *wiphy); +/* this is a define for better error reporting (file/line) */ +#define lockdep_assert_wiphy(wiphy) lockdep_assert_held(&(wiphy)->mtx) + +/** + * rcu_dereference_wiphy - rcu_dereference with debug checking + * @wiphy: the wiphy to check the locking on + * @p: The pointer to read, prior to dereferencing + * + * Do an rcu_dereference(p), but check caller either holds rcu_read_lock() + * or RTNL. Note: Please prefer wiphy_dereference() or rcu_dereference(). + */ +#define rcu_dereference_wiphy(wiphy, p) \ + rcu_dereference_check(p, lockdep_is_held(&wiphy->mtx)) + +/** + * wiphy_dereference - fetch RCU pointer when updates are prevented by wiphy mtx + * @wiphy: the wiphy to check the locking on + * @p: The pointer to read, prior to dereferencing + * + * Return the value of the specified RCU-protected pointer, but omit the + * READ_ONCE(), because caller holds the wiphy mutex used for updates. + */ +#define wiphy_dereference(wiphy, p) \ + rcu_dereference_protected(p, lockdep_is_held(&wiphy->mtx)) + +/** + * get_wiphy_regdom - get custom regdomain for the given wiphy + * @wiphy: the wiphy to get the regdomain from + */ +const struct ieee80211_regdomain *get_wiphy_regdom(struct wiphy *wiphy); + /** * wiphy_unregister - deregister a wiphy from cfg80211 * @@ -5211,13 +5253,45 @@ struct cfg80211_cached_keys; struct cfg80211_cqm_config; /** + * wiphy_lock - lock the wiphy + * @wiphy: the wiphy to lock + * + * This is mostly exposed so it can be done around registering and + * unregistering netdevs that aren't created through cfg80211 calls, + * since that requires locking in cfg80211 when the notifiers is + * called, but that cannot differentiate which way it's called. + * + * When cfg80211 ops are called, the wiphy is already locked. + */ +static inline void wiphy_lock(struct wiphy *wiphy) + __acquires(&wiphy->mtx) +{ + mutex_lock(&wiphy->mtx); + __acquire(&wiphy->mtx); +} + +/** + * wiphy_unlock - unlock the wiphy again + * @wiphy: the wiphy to unlock + */ +static inline void wiphy_unlock(struct wiphy *wiphy) + __releases(&wiphy->mtx) +{ + __release(&wiphy->mtx); + mutex_unlock(&wiphy->mtx); +} + +/** * struct wireless_dev - wireless device state * * For netdevs, this structure must be allocated by the driver * that uses the ieee80211_ptr field in struct net_device (this * is intentional so it can be allocated along with the netdev.) * It need not be registered then as netdev registration will - * be intercepted by cfg80211 to see the new wireless device. + * be intercepted by cfg80211 to see the new wireless device, + * however, drivers must lock the wiphy before registering or + * unregistering netdevs if they pre-create any netdevs (in ops + * called from cfg80211, the wiphy is already locked.) * * For non-netdev uses, it must also be allocated by the driver * in response to the cfg80211 callbacks that require it, as @@ -5226,6 +5300,9 @@ struct cfg80211_cqm_config; * * @wiphy: pointer to hardware description * @iftype: interface type + * @registered: is this wdev already registered with cfg80211 + * @registering: indicates we're doing registration under wiphy lock + * for the notifier * @list: (private) Used to collect the interfaces * @netdev: (private) Used to reference back to the netdev, may be %NULL * @identifier: (private) Identifier used in nl80211 to identify this @@ -5309,7 +5386,7 @@ struct wireless_dev { struct mutex mtx; - bool use_4addr, is_running; + bool use_4addr, is_running, registered, registering; u8 address[ETH_ALEN] __aligned(sizeof(u16)); @@ -5978,18 +6055,18 @@ int regulatory_set_wiphy_regd(struct wiphy *wiphy, struct ieee80211_regdomain *rd); /** - * regulatory_set_wiphy_regd_sync_rtnl - set regdom for self-managed drivers + * regulatory_set_wiphy_regd_sync - set regdom for self-managed drivers * @wiphy: the wireless device we want to process the regulatory domain on * @rd: the regulatory domain information to use for this wiphy * - * This functions requires the RTNL to be held and applies the new regdomain - * synchronously to this wiphy. For more details see - * regulatory_set_wiphy_regd(). + * This functions requires the RTNL and the wiphy mutex to be held and + * applies the new regdomain synchronously to this wiphy. For more details + * see regulatory_set_wiphy_regd(). * * Return: 0 on success. -EINVAL, -EPERM */ -int regulatory_set_wiphy_regd_sync_rtnl(struct wiphy *wiphy, - struct ieee80211_regdomain *rd); +int regulatory_set_wiphy_regd_sync(struct wiphy *wiphy, + struct ieee80211_regdomain *rd); /** * wiphy_apply_custom_regulatory - apply a custom driver regulatory domain @@ -6107,7 +6184,7 @@ void cfg80211_sched_scan_results(struct wiphy *wiphy, u64 reqid); void cfg80211_sched_scan_stopped(struct wiphy *wiphy, u64 reqid); /** - * cfg80211_sched_scan_stopped_rtnl - notify that the scheduled scan has stopped + * cfg80211_sched_scan_stopped_locked - notify that the scheduled scan has stopped * * @wiphy: the wiphy on which the scheduled scan stopped * @reqid: identifier for the related scheduled scan request @@ -6115,9 +6192,9 @@ void cfg80211_sched_scan_stopped(struct wiphy *wiphy, u64 reqid); * The driver can call this function to inform cfg80211 that the * scheduled scan had to be stopped, for whatever reason. The driver * is then called back via the sched_scan_stop operation when done. - * This function should be called with rtnl locked. + * This function should be called with the wiphy mutex held. */ -void cfg80211_sched_scan_stopped_rtnl(struct wiphy *wiphy, u64 reqid); +void cfg80211_sched_scan_stopped_locked(struct wiphy *wiphy, u64 reqid); /** * cfg80211_inform_bss_frame_data - inform cfg80211 of a received BSS frame @@ -7554,7 +7631,7 @@ bool cfg80211_reg_can_beacon(struct wiphy *wiphy, * also checks if IR-relaxation conditions apply, to allow beaconing under * more permissive conditions. * - * Requires the RTNL to be held. + * Requires the wiphy mutex to be held. */ bool cfg80211_reg_can_beacon_relax(struct wiphy *wiphy, struct cfg80211_chan_def *chandef, @@ -7652,19 +7729,46 @@ u32 cfg80211_calculate_bitrate(struct rate_info *rate); * cfg80211_unregister_wdev - remove the given wdev * @wdev: struct wireless_dev to remove * - * Call this function only for wdevs that have no netdev assigned, - * e.g. P2P Devices. It removes the device from the list so that - * it can no longer be used. It is necessary to call this function - * even when cfg80211 requests the removal of the interface by - * calling the del_virtual_intf() callback. The function must also - * be called when the driver wishes to unregister the wdev, e.g. - * when the device is unbound from the driver. + * This function removes the device so it can no longer be used. It is necessary + * to call this function even when cfg80211 requests the removal of the device + * by calling the del_virtual_intf() callback. The function must also be called + * when the driver wishes to unregister the wdev, e.g. when the hardware device + * is unbound from the driver. * - * Requires the RTNL to be held. + * Requires the RTNL and wiphy mutex to be held. */ void cfg80211_unregister_wdev(struct wireless_dev *wdev); /** + * cfg80211_register_netdevice - register the given netdev + * @dev: the netdev to register + * + * Note: In contexts coming from cfg80211 callbacks, you must call this rather + * than register_netdevice(), unregister_netdev() is impossible as the RTNL is + * held. Otherwise, both register_netdevice() and register_netdev() are usable + * instead as well. + * + * Requires the RTNL and wiphy mutex to be held. + */ +int cfg80211_register_netdevice(struct net_device *dev); + +/** + * cfg80211_unregister_netdevice - unregister the given netdev + * @dev: the netdev to register + * + * Note: In contexts coming from cfg80211 callbacks, you must call this rather + * than unregister_netdevice(), unregister_netdev() is impossible as the RTNL + * is held. Otherwise, both unregister_netdevice() and unregister_netdev() are + * usable instead as well. + * + * Requires the RTNL and wiphy mutex to be held. + */ +static inline void cfg80211_unregister_netdevice(struct net_device *dev) +{ + cfg80211_unregister_wdev(dev->ieee80211_ptr); +} + +/** * struct cfg80211_ft_event_params - FT Information Elements * @ies: FT IEs * @ies_len: length of the FT IE in bytes |