diff options
Diffstat (limited to 'include/net/mac80211.h')
-rw-r--r-- | include/net/mac80211.h | 93 |
1 files changed, 64 insertions, 29 deletions
diff --git a/include/net/mac80211.h b/include/net/mac80211.h index ac2ed8ec662b..72080d9d617e 100644 --- a/include/net/mac80211.h +++ b/include/net/mac80211.h @@ -807,6 +807,7 @@ enum mac80211_tx_info_flags { * @IEEE80211_TX_CTRL_RATE_INJECT: This frame is injected with rate information * @IEEE80211_TX_CTRL_AMSDU: This frame is an A-MSDU frame * @IEEE80211_TX_CTRL_FAST_XMIT: This frame is going through the fast_xmit path + * @IEEE80211_TX_CTRL_SKIP_MPATH_LOOKUP: This frame skips mesh path lookup * * These flags are used in tx_info->control.flags. */ @@ -816,6 +817,7 @@ enum mac80211_tx_control_flags { IEEE80211_TX_CTRL_RATE_INJECT = BIT(2), IEEE80211_TX_CTRL_AMSDU = BIT(3), IEEE80211_TX_CTRL_FAST_XMIT = BIT(4), + IEEE80211_TX_CTRL_SKIP_MPATH_LOOKUP = BIT(5), }; /* @@ -1697,6 +1699,7 @@ struct wireless_dev *ieee80211_vif_to_wdev(struct ieee80211_vif *vif); * @IEEE80211_KEY_FLAG_PUT_MIC_SPACE: This flag should be set by the driver for * a TKIP key if it only requires MIC space. Do not set together with * @IEEE80211_KEY_FLAG_GENERATE_MMIC on the same key. + * @IEEE80211_KEY_FLAG_NO_AUTO_TX: Key needs explicit Tx activation. */ enum ieee80211_key_flags { IEEE80211_KEY_FLAG_GENERATE_IV_MGMT = BIT(0), @@ -1708,6 +1711,7 @@ enum ieee80211_key_flags { IEEE80211_KEY_FLAG_RX_MGMT = BIT(6), IEEE80211_KEY_FLAG_RESERVE_TAILROOM = BIT(7), IEEE80211_KEY_FLAG_PUT_MIC_SPACE = BIT(8), + IEEE80211_KEY_FLAG_NO_AUTO_TX = BIT(9), }; /** @@ -1888,6 +1892,24 @@ struct ieee80211_sta_rates { }; /** + * struct ieee80211_sta_txpwr - station txpower configuration + * + * Used to configure txpower for station. + * + * @power: indicates the tx power, in dBm, to be used when sending data frames + * to the STA. + * @type: In particular if TPC %type is NL80211_TX_POWER_LIMITED then tx power + * will be less than or equal to specified from userspace, whereas if TPC + * %type is NL80211_TX_POWER_AUTOMATIC then it indicates default tx power. + * NL80211_TX_POWER_FIXED is not a valid configuration option for + * per peer TPC. + */ +struct ieee80211_sta_txpwr { + s16 power; + enum nl80211_tx_power_setting type; +}; + +/** * struct ieee80211_sta - station table entry * * A station table entry represents a station we are possibly @@ -1973,6 +1995,7 @@ struct ieee80211_sta { bool support_p2p_ps; u16 max_rc_amsdu_len; u16 max_tid_amsdu_len[IEEE80211_NUM_TIDS]; + struct ieee80211_sta_txpwr txpwr; struct ieee80211_txq *txq[IEEE80211_NUM_TIDS + 1]; @@ -2243,6 +2266,9 @@ struct ieee80211_txq { * @IEEE80211_HW_SUPPORTS_ONLY_HE_MULTI_BSSID: Hardware supports multi BSSID * only for HE APs. Applies if @IEEE80211_HW_SUPPORTS_MULTI_BSSID is set. * + * @IEEE80211_HW_EXT_KEY_ID_NATIVE: Driver and hardware are supporting Extended + * Key ID and can handle two unicast keys per station for Rx and Tx. + * * @NUM_IEEE80211_HW_FLAGS: number of hardware flags, used for sizing arrays */ enum ieee80211_hw_flags { @@ -2294,6 +2320,7 @@ enum ieee80211_hw_flags { IEEE80211_HW_TX_STATUS_NO_AMPDU_LEN, IEEE80211_HW_SUPPORTS_MULTI_BSSID, IEEE80211_HW_SUPPORTS_ONLY_HE_MULTI_BSSID, + IEEE80211_HW_EXT_KEY_ID_NATIVE, /* keep last, obviously */ NUM_IEEE80211_HW_FLAGS @@ -3794,6 +3821,9 @@ struct ieee80211_ops { #endif void (*sta_notify)(struct ieee80211_hw *hw, struct ieee80211_vif *vif, enum sta_notify_cmd, struct ieee80211_sta *sta); + int (*sta_set_txpwr)(struct ieee80211_hw *hw, + struct ieee80211_vif *vif, + struct ieee80211_sta *sta); int (*sta_state)(struct ieee80211_hw *hw, struct ieee80211_vif *vif, struct ieee80211_sta *sta, enum ieee80211_sta_state old_state, @@ -6231,8 +6261,6 @@ struct sk_buff *ieee80211_tx_dequeue(struct ieee80211_hw *hw, * @hw: pointer as obtained from ieee80211_alloc_hw() * @ac: AC number to return packets from. * - * Should only be called between calls to ieee80211_txq_schedule_start() - * and ieee80211_txq_schedule_end(). * Returns the next txq if successful, %NULL if no queue is eligible. If a txq * is returned, it should be returned with ieee80211_return_txq() after the * driver has finished scheduling it. @@ -6240,51 +6268,58 @@ struct sk_buff *ieee80211_tx_dequeue(struct ieee80211_hw *hw, struct ieee80211_txq *ieee80211_next_txq(struct ieee80211_hw *hw, u8 ac); /** - * ieee80211_return_txq - return a TXQ previously acquired by ieee80211_next_txq() - * - * @hw: pointer as obtained from ieee80211_alloc_hw() - * @txq: pointer obtained from station or virtual interface - * - * Should only be called between calls to ieee80211_txq_schedule_start() - * and ieee80211_txq_schedule_end(). - */ -void ieee80211_return_txq(struct ieee80211_hw *hw, struct ieee80211_txq *txq); - -/** - * ieee80211_txq_schedule_start - acquire locks for safe scheduling of an AC + * ieee80211_txq_schedule_start - start new scheduling round for TXQs * * @hw: pointer as obtained from ieee80211_alloc_hw() * @ac: AC number to acquire locks for * - * Acquire locks needed to schedule TXQs from the given AC. Should be called - * before ieee80211_next_txq() or ieee80211_return_txq(). + * Should be called before ieee80211_next_txq() or ieee80211_return_txq(). + * The driver must not call multiple TXQ scheduling rounds concurrently. */ -void ieee80211_txq_schedule_start(struct ieee80211_hw *hw, u8 ac) - __acquires(txq_lock); +void ieee80211_txq_schedule_start(struct ieee80211_hw *hw, u8 ac); + +/* (deprecated) */ +static inline void ieee80211_txq_schedule_end(struct ieee80211_hw *hw, u8 ac) +{ +} + +void __ieee80211_schedule_txq(struct ieee80211_hw *hw, + struct ieee80211_txq *txq, bool force); /** - * ieee80211_txq_schedule_end - release locks for safe scheduling of an AC + * ieee80211_schedule_txq - schedule a TXQ for transmission * * @hw: pointer as obtained from ieee80211_alloc_hw() - * @ac: AC number to acquire locks for + * @txq: pointer obtained from station or virtual interface + * + * Schedules a TXQ for transmission if it is not already scheduled, + * even if mac80211 does not have any packets buffered. * - * Release locks previously acquired by ieee80211_txq_schedule_end(). + * The driver may call this function if it has buffered packets for + * this TXQ internally. */ -void ieee80211_txq_schedule_end(struct ieee80211_hw *hw, u8 ac) - __releases(txq_lock); +static inline void +ieee80211_schedule_txq(struct ieee80211_hw *hw, struct ieee80211_txq *txq) +{ + __ieee80211_schedule_txq(hw, txq, true); +} /** - * ieee80211_schedule_txq - schedule a TXQ for transmission + * ieee80211_return_txq - return a TXQ previously acquired by ieee80211_next_txq() * * @hw: pointer as obtained from ieee80211_alloc_hw() * @txq: pointer obtained from station or virtual interface + * @force: schedule txq even if mac80211 does not have any buffered packets. * - * Schedules a TXQ for transmission if it is not already scheduled. Takes a - * lock, which means it must *not* be called between - * ieee80211_txq_schedule_start() and ieee80211_txq_schedule_end() + * The driver may set force=true if it has buffered packets for this TXQ + * internally. */ -void ieee80211_schedule_txq(struct ieee80211_hw *hw, struct ieee80211_txq *txq) - __acquires(txq_lock) __releases(txq_lock); +static inline void +ieee80211_return_txq(struct ieee80211_hw *hw, struct ieee80211_txq *txq, + bool force) +{ + __ieee80211_schedule_txq(hw, txq, force); +} /** * ieee80211_txq_may_transmit - check whether TXQ is allowed to transmit |