diff options
Diffstat (limited to '')
| -rw-r--r-- | include/uapi/linux/bpf.h | 123 |
1 files changed, 110 insertions, 13 deletions
diff --git a/include/uapi/linux/bpf.h b/include/uapi/linux/bpf.h index 77d7c1bb2923..4c24daa43bac 100644 --- a/include/uapi/linux/bpf.h +++ b/include/uapi/linux/bpf.h @@ -19,7 +19,8 @@ /* ld/ldx fields */ #define BPF_DW 0x18 /* double word (64-bit) */ -#define BPF_XADD 0xc0 /* exclusive add */ +#define BPF_ATOMIC 0xc0 /* atomic memory ops - op type in immediate */ +#define BPF_XADD 0xc0 /* exclusive add - legacy name */ /* alu/jmp fields */ #define BPF_MOV 0xb0 /* mov reg to reg */ @@ -43,6 +44,11 @@ #define BPF_CALL 0x80 /* function call */ #define BPF_EXIT 0x90 /* function return */ +/* atomic op type fields (stored in immediate) */ +#define BPF_FETCH 0x01 /* not an opcode on its own, used to build others */ +#define BPF_XCHG (0xe0 | BPF_FETCH) /* atomic exchange */ +#define BPF_CMPXCHG (0xf0 | BPF_FETCH) /* atomic compare-and-write */ + /* Register numbers */ enum { BPF_REG_0 = 0, @@ -1650,22 +1656,30 @@ union bpf_attr { * networking traffic statistics as it provides a global socket * identifier that can be assumed unique. * Return - * A 8-byte long non-decreasing number on success, or 0 if the - * socket field is missing inside *skb*. + * A 8-byte long unique number on success, or 0 if the socket + * field is missing inside *skb*. * * u64 bpf_get_socket_cookie(struct bpf_sock_addr *ctx) * Description * Equivalent to bpf_get_socket_cookie() helper that accepts * *skb*, but gets socket from **struct bpf_sock_addr** context. * Return - * A 8-byte long non-decreasing number. + * A 8-byte long unique number. * * u64 bpf_get_socket_cookie(struct bpf_sock_ops *ctx) * Description * Equivalent to **bpf_get_socket_cookie**\ () helper that accepts * *skb*, but gets socket from **struct bpf_sock_ops** context. * Return - * A 8-byte long non-decreasing number. + * A 8-byte long unique number. + * + * u64 bpf_get_socket_cookie(struct sock *sk) + * Description + * Equivalent to **bpf_get_socket_cookie**\ () helper that accepts + * *sk*, but gets socket from a BTF **struct sock**. This helper + * also works for sleepable programs. + * Return + * A 8-byte long unique number or 0 if *sk* is NULL. * * u32 bpf_get_socket_uid(struct sk_buff *skb) * Return @@ -2225,6 +2239,9 @@ union bpf_attr { * * > 0 one of **BPF_FIB_LKUP_RET_** codes explaining why the * packet is not forwarded or needs assist from full stack * + * If lookup fails with BPF_FIB_LKUP_RET_FRAG_NEEDED, then the MTU + * was exceeded and output params->mtu_result contains the MTU. + * * long bpf_sock_hash_update(struct bpf_sock_ops *skops, struct bpf_map *map, void *key, u64 flags) * Description * Add an entry to, or update a sockhash *map* referencing sockets. @@ -2448,7 +2465,7 @@ union bpf_attr { * running simultaneously. * * A user should care about the synchronization by himself. - * For example, by using the **BPF_STX_XADD** instruction to alter + * For example, by using the **BPF_ATOMIC** instructions to alter * the shared data. * Return * A pointer to the local storage area. @@ -2993,10 +3010,10 @@ union bpf_attr { * string length is larger than *size*, just *size*-1 bytes are * copied and the last byte is set to NUL. * - * On success, the length of the copied string is returned. This - * makes this helper useful in tracing programs for reading - * strings, and more importantly to get its length at runtime. See - * the following snippet: + * On success, returns the number of bytes that were written, + * including the terminal NUL. This makes this helper useful in + * tracing programs for reading strings, and more importantly to + * get its length at runtime. See the following snippet: * * :: * @@ -3024,7 +3041,7 @@ union bpf_attr { * **->mm->env_start**: using this helper and the return value, * one can quickly iterate at the right offset of the memory area. * Return - * On success, the strictly positive length of the string, + * On success, the strictly positive length of the output string, * including the trailing NUL character. On error, a negative * value. * @@ -3830,6 +3847,69 @@ union bpf_attr { * Return * A pointer to a struct socket on success or NULL if the file is * not a socket. + * + * long bpf_check_mtu(void *ctx, u32 ifindex, u32 *mtu_len, s32 len_diff, u64 flags) + * Description + + * Check ctx packet size against exceeding MTU of net device (based + * on *ifindex*). This helper will likely be used in combination + * with helpers that adjust/change the packet size. + * + * The argument *len_diff* can be used for querying with a planned + * size change. This allows to check MTU prior to changing packet + * ctx. Providing an *len_diff* adjustment that is larger than the + * actual packet size (resulting in negative packet size) will in + * principle not exceed the MTU, why it is not considered a + * failure. Other BPF-helpers are needed for performing the + * planned size change, why the responsability for catch a negative + * packet size belong in those helpers. + * + * Specifying *ifindex* zero means the MTU check is performed + * against the current net device. This is practical if this isn't + * used prior to redirect. + * + * The Linux kernel route table can configure MTUs on a more + * specific per route level, which is not provided by this helper. + * For route level MTU checks use the **bpf_fib_lookup**\ () + * helper. + * + * *ctx* is either **struct xdp_md** for XDP programs or + * **struct sk_buff** for tc cls_act programs. + * + * The *flags* argument can be a combination of one or more of the + * following values: + * + * **BPF_MTU_CHK_SEGS** + * This flag will only works for *ctx* **struct sk_buff**. + * If packet context contains extra packet segment buffers + * (often knows as GSO skb), then MTU check is harder to + * check at this point, because in transmit path it is + * possible for the skb packet to get re-segmented + * (depending on net device features). This could still be + * a MTU violation, so this flag enables performing MTU + * check against segments, with a different violation + * return code to tell it apart. Check cannot use len_diff. + * + * On return *mtu_len* pointer contains the MTU value of the net + * device. Remember the net device configured MTU is the L3 size, + * which is returned here and XDP and TX length operate at L2. + * Helper take this into account for you, but remember when using + * MTU value in your BPF-code. On input *mtu_len* must be a valid + * pointer and be initialized (to zero), else verifier will reject + * BPF program. + * + * Return + * * 0 on success, and populate MTU value in *mtu_len* pointer. + * + * * < 0 if any input argument is invalid (*mtu_len* not updated) + * + * MTU violations return positive values, but also populate MTU + * value in *mtu_len* pointer, as this can be needed for + * implementing PMTU handing: + * + * * **BPF_MTU_CHK_RET_FRAG_NEEDED** + * * **BPF_MTU_CHK_RET_SEGS_TOOBIG** + * */ #define __BPF_FUNC_MAPPER(FN) \ FN(unspec), \ @@ -3995,6 +4075,7 @@ union bpf_attr { FN(ktime_get_coarse_ns), \ FN(ima_inode_hash), \ FN(sock_from_file), \ + FN(check_mtu), \ /* */ /* integer value in 'imm' field of BPF_CALL instruction selects which helper @@ -4495,6 +4576,7 @@ struct bpf_prog_info { __aligned_u64 prog_tags; __u64 run_time_ns; __u64 run_cnt; + __u64 recursion_misses; } __attribute__((aligned(8))); struct bpf_map_info { @@ -4975,9 +5057,13 @@ struct bpf_fib_lookup { __be16 sport; __be16 dport; - /* total length of packet from network header - used for MTU check */ - __u16 tot_len; + union { /* used for MTU check */ + /* input to lookup */ + __u16 tot_len; /* L3 length from network hdr (iph->tot_len) */ + /* output: MTU value */ + __u16 mtu_result; + }; /* input: L3 device index for lookup * output: device index from FIB lookup */ @@ -5023,6 +5109,17 @@ struct bpf_redir_neigh { }; }; +/* bpf_check_mtu flags*/ +enum bpf_check_mtu_flags { + BPF_MTU_CHK_SEGS = (1U << 0), +}; + +enum bpf_check_mtu_ret { + BPF_MTU_CHK_RET_SUCCESS, /* check and lookup successful */ + BPF_MTU_CHK_RET_FRAG_NEEDED, /* fragmentation required to fwd */ + BPF_MTU_CHK_RET_SEGS_TOOBIG, /* GSO re-segmentation needed to fwd */ +}; + enum bpf_task_fd_type { BPF_FD_TYPE_RAW_TRACEPOINT, /* tp name */ BPF_FD_TYPE_TRACEPOINT, /* tp name */ |