aboutsummaryrefslogtreecommitdiffstats
path: root/include
diff options
context:
space:
mode:
Diffstat (limited to 'include')
-rw-r--r--include/linux/mtd/nand.h25
-rw-r--r--include/linux/mtd/onenand.h6
-rw-r--r--include/linux/mtd/onenand_regs.h4
-rw-r--r--include/mtd/Kbuild3
-rw-r--r--include/mtd/mtd-abi.h6
5 files changed, 31 insertions, 13 deletions
diff --git a/include/linux/mtd/nand.h b/include/linux/mtd/nand.h
index 0b4cd2fa64aa..70420bbae82b 100644
--- a/include/linux/mtd/nand.h
+++ b/include/linux/mtd/nand.h
@@ -27,9 +27,17 @@
struct mtd_info;
/* Scan and identify a NAND device */
extern int nand_scan (struct mtd_info *mtd, int max_chips);
+/* Separate phases of nand_scan(), allowing board driver to intervene
+ * and override command or ECC setup according to flash type */
+extern int nand_scan_ident(struct mtd_info *mtd, int max_chips);
+extern int nand_scan_tail(struct mtd_info *mtd);
+
/* Free resources held by the NAND device */
extern void nand_release (struct mtd_info *mtd);
+/* Internal helper for board drivers which need to override command function */
+extern void nand_wait_ready(struct mtd_info *mtd);
+
/* The maximum number of NAND chips in an array */
#define NAND_MAX_CHIPS 8
@@ -178,7 +186,9 @@ typedef enum {
#define NAND_USE_FLASH_BBT 0x00010000
/* This option skips the bbt scan during initialization. */
#define NAND_SKIP_BBTSCAN 0x00020000
-
+/* This option is defined if the board driver allocates its own buffers
+ (e.g. because it needs them DMA-coherent */
+#define NAND_OWN_BUFFERS 0x00040000
/* Options set by nand scan */
/* Nand scan has allocated controller struct */
#define NAND_CONTROLLER_ALLOC 0x80000000
@@ -228,6 +238,8 @@ struct nand_hw_control {
* be provided if an hardware ECC is available
* @calculate: function for ecc calculation or readback from ecc hardware
* @correct: function for ecc correction, matching to ecc generator (sw/hw)
+ * @read_page_raw: function to read a raw page without ECC
+ * @write_page_raw: function to write a raw page without ECC
* @read_page: function to read a page according to the ecc generator requirements
* @write_page: function to write a page according to the ecc generator requirements
* @read_oob: function to read chip OOB data
@@ -249,6 +261,12 @@ struct nand_ecc_ctrl {
int (*correct)(struct mtd_info *mtd, uint8_t *dat,
uint8_t *read_ecc,
uint8_t *calc_ecc);
+ int (*read_page_raw)(struct mtd_info *mtd,
+ struct nand_chip *chip,
+ uint8_t *buf);
+ void (*write_page_raw)(struct mtd_info *mtd,
+ struct nand_chip *chip,
+ const uint8_t *buf);
int (*read_page)(struct mtd_info *mtd,
struct nand_chip *chip,
uint8_t *buf);
@@ -337,6 +355,7 @@ struct nand_buffers {
* @priv: [OPTIONAL] pointer to private chip date
* @errstat: [OPTIONAL] hardware specific function to perform additional error status checks
* (determine if errors are correctable)
+ * @write_page [REPLACEABLE] High-level page write function
*/
struct nand_chip {
@@ -359,6 +378,8 @@ struct nand_chip {
void (*erase_cmd)(struct mtd_info *mtd, int page);
int (*scan_bbt)(struct mtd_info *mtd);
int (*errstat)(struct mtd_info *mtd, struct nand_chip *this, int state, int status, int page);
+ int (*write_page)(struct mtd_info *mtd, struct nand_chip *chip,
+ const uint8_t *buf, int page, int cached, int raw);
int chip_delay;
unsigned int options;
@@ -380,7 +401,7 @@ struct nand_chip {
struct nand_ecclayout *ecclayout;
struct nand_ecc_ctrl ecc;
- struct nand_buffers buffers;
+ struct nand_buffers *buffers;
struct nand_hw_control hwcontrol;
struct mtd_oob_ops ops;
diff --git a/include/linux/mtd/onenand.h b/include/linux/mtd/onenand.h
index 1f4972155249..6f045b586e76 100644
--- a/include/linux/mtd/onenand.h
+++ b/include/linux/mtd/onenand.h
@@ -1,7 +1,7 @@
/*
* linux/include/linux/mtd/onenand.h
*
- * Copyright (C) 2005 Samsung Electronics
+ * Copyright (C) 2005-2006 Samsung Electronics
* Kyungmin Park <kyungmin.park@samsung.com>
*
* This program is free software; you can redistribute it and/or modify
@@ -96,6 +96,7 @@ struct onenand_chip {
void __iomem *base;
unsigned int chipsize;
unsigned int device_id;
+ unsigned int version_id;
unsigned int density_mask;
unsigned int options;
@@ -149,7 +150,8 @@ struct onenand_chip {
/*
* Options bits
*/
-#define ONENAND_CONT_LOCK (0x0001)
+#define ONENAND_HAS_CONT_LOCK (0x0001)
+#define ONENAND_HAS_UNLOCK_ALL (0x0002)
#define ONENAND_PAGEBUF_ALLOC (0x1000)
/*
diff --git a/include/linux/mtd/onenand_regs.h b/include/linux/mtd/onenand_regs.h
index 4a72818d2545..9e409fe6ded6 100644
--- a/include/linux/mtd/onenand_regs.h
+++ b/include/linux/mtd/onenand_regs.h
@@ -3,7 +3,7 @@
*
* OneNAND Register header file
*
- * Copyright (C) 2005 Samsung Electronics
+ * Copyright (C) 2005-2006 Samsung Electronics
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
@@ -72,6 +72,7 @@
#define ONENAND_DEVICE_VCC_MASK (0x3)
#define ONENAND_DEVICE_DENSITY_512Mb (0x002)
+#define ONENAND_DEVICE_DENSITY_1Gb (0x003)
/*
* Version ID Register F002h (R)
@@ -110,6 +111,7 @@
#define ONENAND_CMD_UNLOCK (0x23)
#define ONENAND_CMD_LOCK (0x2A)
#define ONENAND_CMD_LOCK_TIGHT (0x2C)
+#define ONENAND_CMD_UNLOCK_ALL (0x27)
#define ONENAND_CMD_ERASE (0x94)
#define ONENAND_CMD_RESET (0xF0)
#define ONENAND_CMD_OTP_ACCESS (0x65)
diff --git a/include/mtd/Kbuild b/include/mtd/Kbuild
index 13e7a3c6d794..e0fe92b03a4e 100644
--- a/include/mtd/Kbuild
+++ b/include/mtd/Kbuild
@@ -1,6 +1,5 @@
header-y += inftl-user.h
header-y += jffs2-user.h
+header-y += mtd-abi.h
header-y += mtd-user.h
header-y += nftl-user.h
-
-unifdef-y += mtd-abi.h
diff --git a/include/mtd/mtd-abi.h b/include/mtd/mtd-abi.h
index b0a67b7ffdcd..f913c30d7b89 100644
--- a/include/mtd/mtd-abi.h
+++ b/include/mtd/mtd-abi.h
@@ -7,12 +7,6 @@
#ifndef __MTD_ABI_H__
#define __MTD_ABI_H__
-#ifndef __KERNEL__
-/* Urgh. The whole point of splitting this out into
- separate files was to avoid #ifdef __KERNEL__ */
-#define __user
-#endif
-
struct erase_info_user {
uint32_t start;
uint32_t length;