diff options
Diffstat (limited to 'include')
| -rw-r--r-- | include/asm-generic/simd.h | 14 | ||||
| -rw-r--r-- | include/crypto/ablk_helper.h | 31 | ||||
| -rw-r--r-- | include/crypto/algapi.h | 18 | ||||
| -rw-r--r-- | include/crypto/authenc.h | 12 | ||||
| -rw-r--r-- | include/linux/padata.h | 3 | ||||
| -rw-r--r-- | include/linux/slab.h | 102 | ||||
| -rw-r--r-- | include/linux/tegra-powergate.h | 27 | ||||
| -rw-r--r-- | include/trace/ftrace.h | 5 |
8 files changed, 150 insertions, 62 deletions
diff --git a/include/asm-generic/simd.h b/include/asm-generic/simd.h new file mode 100644 index 000000000000..f57eb7b5c23b --- /dev/null +++ b/include/asm-generic/simd.h @@ -0,0 +1,14 @@ + +#include <linux/hardirq.h> + +/* + * may_use_simd - whether it is allowable at this time to issue SIMD + * instructions or access the SIMD register file + * + * As architectures typically don't preserve the SIMD register file when + * taking an interrupt, !in_interrupt() should be a reasonable default. + */ +static __must_check inline bool may_use_simd(void) +{ + return !in_interrupt(); +} diff --git a/include/crypto/ablk_helper.h b/include/crypto/ablk_helper.h new file mode 100644 index 000000000000..4f93df50c23e --- /dev/null +++ b/include/crypto/ablk_helper.h @@ -0,0 +1,31 @@ +/* + * Shared async block cipher helpers + */ + +#ifndef _CRYPTO_ABLK_HELPER_H +#define _CRYPTO_ABLK_HELPER_H + +#include <linux/crypto.h> +#include <linux/kernel.h> +#include <crypto/cryptd.h> + +struct async_helper_ctx { + struct cryptd_ablkcipher *cryptd_tfm; +}; + +extern int ablk_set_key(struct crypto_ablkcipher *tfm, const u8 *key, + unsigned int key_len); + +extern int __ablk_encrypt(struct ablkcipher_request *req); + +extern int ablk_encrypt(struct ablkcipher_request *req); + +extern int ablk_decrypt(struct ablkcipher_request *req); + +extern void ablk_exit(struct crypto_tfm *tfm); + +extern int ablk_init_common(struct crypto_tfm *tfm, const char *drv_name); + +extern int ablk_init(struct crypto_tfm *tfm); + +#endif /* _CRYPTO_ABLK_HELPER_H */ diff --git a/include/crypto/algapi.h b/include/crypto/algapi.h index 418d270e1806..e73c19e90e38 100644 --- a/include/crypto/algapi.h +++ b/include/crypto/algapi.h @@ -386,5 +386,21 @@ static inline int crypto_requires_sync(u32 type, u32 mask) return (type ^ CRYPTO_ALG_ASYNC) & mask & CRYPTO_ALG_ASYNC; } -#endif /* _CRYPTO_ALGAPI_H */ +noinline unsigned long __crypto_memneq(const void *a, const void *b, size_t size); + +/** + * crypto_memneq - Compare two areas of memory without leaking + * timing information. + * + * @a: One area of memory + * @b: Another area of memory + * @size: The size of the area. + * + * Returns 0 when data is equal, 1 otherwise. + */ +static inline int crypto_memneq(const void *a, const void *b, size_t size) +{ + return __crypto_memneq(a, b, size) != 0UL ? 1 : 0; +} +#endif /* _CRYPTO_ALGAPI_H */ diff --git a/include/crypto/authenc.h b/include/crypto/authenc.h index e47b044929a8..6775059539b5 100644 --- a/include/crypto/authenc.h +++ b/include/crypto/authenc.h @@ -23,5 +23,15 @@ struct crypto_authenc_key_param { __be32 enckeylen; }; -#endif /* _CRYPTO_AUTHENC_H */ +struct crypto_authenc_keys { + const u8 *authkey; + const u8 *enckey; + + unsigned int authkeylen; + unsigned int enckeylen; +}; +int crypto_authenc_extractkeys(struct crypto_authenc_keys *keys, const u8 *key, + unsigned int keylen); + +#endif /* _CRYPTO_AUTHENC_H */ diff --git a/include/linux/padata.h b/include/linux/padata.h index 86292beebfe2..438694650471 100644 --- a/include/linux/padata.h +++ b/include/linux/padata.h @@ -129,10 +129,9 @@ struct parallel_data { struct padata_serial_queue __percpu *squeue; atomic_t reorder_objects; atomic_t refcnt; + atomic_t seq_nr; struct padata_cpumask cpumask; spinlock_t lock ____cacheline_aligned; - spinlock_t seq_lock; - unsigned int seq_nr; unsigned int processed; struct timer_list timer; }; diff --git a/include/linux/slab.h b/include/linux/slab.h index c2bba248fa63..1e2f4fe12773 100644 --- a/include/linux/slab.h +++ b/include/linux/slab.h @@ -388,10 +388,55 @@ static __always_inline void *kmalloc_large(size_t size, gfp_t flags) /** * kmalloc - allocate memory * @size: how many bytes of memory are required. - * @flags: the type of memory to allocate (see kcalloc). + * @flags: the type of memory to allocate. * * kmalloc is the normal method of allocating memory * for objects smaller than page size in the kernel. + * + * The @flags argument may be one of: + * + * %GFP_USER - Allocate memory on behalf of user. May sleep. + * + * %GFP_KERNEL - Allocate normal kernel ram. May sleep. + * + * %GFP_ATOMIC - Allocation will not sleep. May use emergency pools. + * For example, use this inside interrupt handlers. + * + * %GFP_HIGHUSER - Allocate pages from high memory. + * + * %GFP_NOIO - Do not do any I/O at all while trying to get memory. + * + * %GFP_NOFS - Do not make any fs calls while trying to get memory. + * + * %GFP_NOWAIT - Allocation will not sleep. + * + * %GFP_THISNODE - Allocate node-local memory only. + * + * %GFP_DMA - Allocation suitable for DMA. + * Should only be used for kmalloc() caches. Otherwise, use a + * slab created with SLAB_DMA. + * + * Also it is possible to set different flags by OR'ing + * in one or more of the following additional @flags: + * + * %__GFP_COLD - Request cache-cold pages instead of + * trying to return cache-warm pages. + * + * %__GFP_HIGH - This allocation has high priority and may use emergency pools. + * + * %__GFP_NOFAIL - Indicate that this allocation is in no way allowed to fail + * (think twice before using). + * + * %__GFP_NORETRY - If memory is not immediately available, + * then give up at once. + * + * %__GFP_NOWARN - If allocation fails, don't issue any warnings. + * + * %__GFP_REPEAT - If allocation fails initially, try once more before failing. + * + * There are other flags available as well, but these are not intended + * for general use, and so are not documented here. For a full list of + * potential flags, always refer to linux/gfp.h. */ static __always_inline void *kmalloc(size_t size, gfp_t flags) { @@ -502,61 +547,6 @@ int cache_show(struct kmem_cache *s, struct seq_file *m); void print_slabinfo_header(struct seq_file *m); /** - * kmalloc - allocate memory - * @size: how many bytes of memory are required. - * @flags: the type of memory to allocate. - * - * The @flags argument may be one of: - * - * %GFP_USER - Allocate memory on behalf of user. May sleep. - * - * %GFP_KERNEL - Allocate normal kernel ram. May sleep. - * - * %GFP_ATOMIC - Allocation will not sleep. May use emergency pools. - * For example, use this inside interrupt handlers. - * - * %GFP_HIGHUSER - Allocate pages from high memory. - * - * %GFP_NOIO - Do not do any I/O at all while trying to get memory. - * - * %GFP_NOFS - Do not make any fs calls while trying to get memory. - * - * %GFP_NOWAIT - Allocation will not sleep. - * - * %GFP_THISNODE - Allocate node-local memory only. - * - * %GFP_DMA - Allocation suitable for DMA. - * Should only be used for kmalloc() caches. Otherwise, use a - * slab created with SLAB_DMA. - * - * Also it is possible to set different flags by OR'ing - * in one or more of the following additional @flags: - * - * %__GFP_COLD - Request cache-cold pages instead of - * trying to return cache-warm pages. - * - * %__GFP_HIGH - This allocation has high priority and may use emergency pools. - * - * %__GFP_NOFAIL - Indicate that this allocation is in no way allowed to fail - * (think twice before using). - * - * %__GFP_NORETRY - If memory is not immediately available, - * then give up at once. - * - * %__GFP_NOWARN - If allocation fails, don't issue any warnings. - * - * %__GFP_REPEAT - If allocation fails initially, try once more before failing. - * - * There are other flags available as well, but these are not intended - * for general use, and so are not documented here. For a full list of - * potential flags, always refer to linux/gfp.h. - * - * kmalloc is the normal method of allocating memory - * in the kernel. - */ -static __always_inline void *kmalloc(size_t size, gfp_t flags); - -/** * kmalloc_array - allocate memory for an array. * @n: number of elements. * @size: element size. diff --git a/include/linux/tegra-powergate.h b/include/linux/tegra-powergate.h index c98cfa406952..fd4498329c7c 100644 --- a/include/linux/tegra-powergate.h +++ b/include/linux/tegra-powergate.h @@ -45,6 +45,7 @@ struct clk; #define TEGRA_POWERGATE_3D0 TEGRA_POWERGATE_3D +#ifdef CONFIG_ARCH_TEGRA int tegra_powergate_is_powered(int id); int tegra_powergate_power_on(int id); int tegra_powergate_power_off(int id); @@ -52,5 +53,31 @@ int tegra_powergate_remove_clamping(int id); /* Must be called with clk disabled, and returns with clk enabled */ int tegra_powergate_sequence_power_up(int id, struct clk *clk); +#else +static inline int tegra_powergate_is_powered(int id) +{ + return -ENOSYS; +} + +static inline int tegra_powergate_power_on(int id) +{ + return -ENOSYS; +} + +static inline int tegra_powergate_power_off(int id) +{ + return -ENOSYS; +} + +static inline int tegra_powergate_remove_clamping(int id) +{ + return -ENOSYS; +} + +static inline int tegra_powergate_sequence_power_up(int id, struct clk *clk) +{ + return -ENOSYS; +} +#endif #endif /* _MACH_TEGRA_POWERGATE_H_ */ diff --git a/include/trace/ftrace.h b/include/trace/ftrace.h index 52594b20179e..d17a35c6537e 100644 --- a/include/trace/ftrace.h +++ b/include/trace/ftrace.h @@ -372,7 +372,8 @@ ftrace_define_fields_##call(struct ftrace_event_call *event_call) \ __data_size += (len) * sizeof(type); #undef __string -#define __string(item, src) __dynamic_array(char, item, strlen(src) + 1) +#define __string(item, src) __dynamic_array(char, item, \ + strlen((src) ? (const char *)(src) : "(null)") + 1) #undef DECLARE_EVENT_CLASS #define DECLARE_EVENT_CLASS(call, proto, args, tstruct, assign, print) \ @@ -501,7 +502,7 @@ static inline notrace int ftrace_get_offsets_##call( \ #undef __assign_str #define __assign_str(dst, src) \ - strcpy(__get_str(dst), src); + strcpy(__get_str(dst), (src) ? (const char *)(src) : "(null)"); #undef TP_fast_assign #define TP_fast_assign(args...) args |