1 files changed, 104 insertions, 1 deletions

diff --git a/net/dsa/slave.c b/net/dsa/slave.c
index 5f782fa3029f..1a99bbab0722 100644
--- a/net/dsa/slave.c
+++ b/net/dsa/slave.c
@@ -1218,6 +1218,96 @@ static int dsa_slave_vlan_rx_kill_vid(struct net_device *dev, __be16 proto,
 	return dsa_port_vid_del(dp, vid);
 }
 
+static int dsa_slave_change_mtu(struct net_device *dev, int new_mtu)
+{
+	struct net_device *master = dsa_slave_to_master(dev);
+	struct dsa_port *dp = dsa_slave_to_port(dev);
+	struct dsa_slave_priv *p = netdev_priv(dev);
+	struct dsa_switch *ds = p->dp->ds;
+	struct dsa_port *cpu_dp;
+	int port = p->dp->index;
+	int largest_mtu = 0;
+	int new_master_mtu;
+	int old_master_mtu;
+	int mtu_limit;
+	int cpu_mtu;
+	int err, i;
+
+	if (!ds->ops->port_change_mtu)
+		return -EOPNOTSUPP;
+
+	for (i = 0; i < ds->num_ports; i++) {
+		int slave_mtu;
+
+		if (!dsa_is_user_port(ds, i))
+			continue;
+
+		/* During probe, this function will be called for each slave
+		 * device, while not all of them have been allocated. That's
+		 * ok, it doesn't change what the maximum is, so ignore it.
+		 */
+		if (!dsa_to_port(ds, i)->slave)
+			continue;
+
+		/* Pretend that we already applied the setting, which we
+		 * actually haven't (still haven't done all integrity checks)
+		 */
+		if (i == port)
+			slave_mtu = new_mtu;
+		else
+			slave_mtu = dsa_to_port(ds, i)->slave->mtu;
+
+		if (largest_mtu < slave_mtu)
+			largest_mtu = slave_mtu;
+	}
+
+	cpu_dp = dsa_to_port(ds, port)->cpu_dp;
+
+	mtu_limit = min_t(int, master->max_mtu, dev->max_mtu);
+	old_master_mtu = master->mtu;
+	new_master_mtu = largest_mtu + cpu_dp->tag_ops->overhead;
+	if (new_master_mtu > mtu_limit)
+		return -ERANGE;
+
+	/* If the master MTU isn't over limit, there's no need to check the CPU
+	 * MTU, since that surely isn't either.
+	 */
+	cpu_mtu = largest_mtu;
+
+	/* Start applying stuff */
+	if (new_master_mtu != old_master_mtu) {
+		err = dev_set_mtu(master, new_master_mtu);
+		if (err < 0)
+			goto out_master_failed;
+
+		/* We only need to propagate the MTU of the CPU port to
+		 * upstream switches.
+		 */
+		err = dsa_port_mtu_change(cpu_dp, cpu_mtu, true);
+		if (err)
+			goto out_cpu_failed;
+	}
+
+	err = dsa_port_mtu_change(dp, new_mtu, false);
+	if (err)
+		goto out_port_failed;
+
+	dev->mtu = new_mtu;
+
+	return 0;
+
+out_port_failed:
+	if (new_master_mtu != old_master_mtu)
+		dsa_port_mtu_change(cpu_dp, old_master_mtu -
+				    cpu_dp->tag_ops->overhead,
+				    true);
+out_cpu_failed:
+	if (new_master_mtu != old_master_mtu)
+		dev_set_mtu(master, old_master_mtu);
+out_master_failed:
+	return err;
+}
+
 static const struct ethtool_ops dsa_slave_ethtool_ops = {
 	.get_drvinfo		= dsa_slave_get_drvinfo,
 	.get_regs_len		= dsa_slave_get_regs_len,
@@ -1295,6 +1385,7 @@ static const struct net_device_ops dsa_slave_netdev_ops = {
 	.ndo_vlan_rx_add_vid	= dsa_slave_vlan_rx_add_vid,
 	.ndo_vlan_rx_kill_vid	= dsa_slave_vlan_rx_kill_vid,
 	.ndo_get_devlink_port	= dsa_slave_get_devlink_port,
+	.ndo_change_mtu		= dsa_slave_change_mtu,
 };
 
 static struct device_type dsa_type = {
@@ -1465,7 +1556,10 @@ int dsa_slave_create(struct dsa_port *port)
 	slave_dev->priv_flags |= IFF_NO_QUEUE;
 	slave_dev->netdev_ops = &dsa_slave_netdev_ops;
 	slave_dev->min_mtu = 0;
-	slave_dev->max_mtu = ETH_MAX_MTU;
+	if (ds->ops->port_max_mtu)
+		slave_dev->max_mtu = ds->ops->port_max_mtu(ds, port->index);
+	else
+		slave_dev->max_mtu = ETH_MAX_MTU;
 	SET_NETDEV_DEVTYPE(slave_dev, &dsa_type);
 
 	SET_NETDEV_DEV(slave_dev, port->ds->dev);
@@ -1483,6 +1577,15 @@ int dsa_slave_create(struct dsa_port *port)
 	p->xmit = cpu_dp->tag_ops->xmit;
 	port->slave = slave_dev;
 
+	rtnl_lock();
+	ret = dsa_slave_change_mtu(slave_dev, ETH_DATA_LEN);
+	rtnl_unlock();
+	if (ret && ret != -EOPNOTSUPP) {
+		dev_err(ds->dev, "error %d setting MTU on port %d\n",
+			ret, port->index);
+		goto out_free;
+	}
+
 	netif_carrier_off(slave_dev);
 
 	ret = dsa_slave_phy_setup(slave_dev);