1 files changed, 124 insertions, 0 deletions
diff --git a/net/dsa/tag_rtl4_a.c b/net/dsa/tag_rtl4_a.c
new file mode 100644
index 000000000000..6d928ee3ef7a
--- /dev/null
+++ b/net/dsa/tag_rtl4_a.c
@@ -0,0 +1,124 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Handler for Realtek 4 byte DSA switch tags
+ * Currently only supports protocol "A" found in RTL8366RB
+ * Copyright (c) 2020 Linus Walleij <linus.walleij@linaro.org>
+ *
+ * This "proprietary tag" header looks like so:
+ *
+ * -------------------------------------------------
+ * | MAC DA | MAC SA | 0x8899 | 2 bytes tag | Type |
+ * -------------------------------------------------
+ *
+ * The 2 bytes tag form a 16 bit big endian word. The exact
+ * meaning has been guessed from packet dumps from ingress
+ * frames.
+ */
+
+#include <linux/etherdevice.h>
+#include <linux/bits.h>
+
+#include "dsa_priv.h"
+
+#define RTL4_A_HDR_LEN		4
+#define RTL4_A_ETHERTYPE	0x8899
+#define RTL4_A_PROTOCOL_SHIFT	12
+/*
+ * 0x1 = Realtek Remote Control protocol (RRCP)
+ * 0x2/0x3 seems to be used for loopback testing
+ * 0x9 = RTL8306 DSA protocol
+ * 0xa = RTL8366RB DSA protocol
+ */
+#define RTL4_A_PROTOCOL_RTL8366RB	0xa
+
+static struct sk_buff *rtl4a_tag_xmit(struct sk_buff *skb,
+				      struct net_device *dev)
+{
+	struct dsa_port *dp = dsa_slave_to_port(dev);
+	__be16 *p;
+	u8 *tag;
+	u16 out;
+
+	/* Pad out to at least 60 bytes */
+	if (unlikely(__skb_put_padto(skb, ETH_ZLEN, false)))
+		return NULL;
+
+	netdev_dbg(dev, "add realtek tag to package to port %d\n",
+		   dp->index);
+	skb_push(skb, RTL4_A_HDR_LEN);
+
+	dsa_alloc_etype_header(skb, RTL4_A_HDR_LEN);
+	tag = dsa_etype_header_pos_tx(skb);
+
+	/* Set Ethertype */
+	p = (__be16 *)tag;
+	*p = htons(RTL4_A_ETHERTYPE);
+
+	out = (RTL4_A_PROTOCOL_RTL8366RB << RTL4_A_PROTOCOL_SHIFT);
+	/* The lower bits indicate the port number */
+	out |= BIT(dp->index);
+
+	p = (__be16 *)(tag + 2);
+	*p = htons(out);
+
+	return skb;
+}
+
+static struct sk_buff *rtl4a_tag_rcv(struct sk_buff *skb,
+				     struct net_device *dev)
+{
+	u16 protport;
+	__be16 *p;
+	u16 etype;
+	u8 *tag;
+	u8 prot;
+	u8 port;
+
+	if (unlikely(!pskb_may_pull(skb, RTL4_A_HDR_LEN)))
+		return NULL;
+
+	tag = dsa_etype_header_pos_rx(skb);
+	p = (__be16 *)tag;
+	etype = ntohs(*p);
+	if (etype != RTL4_A_ETHERTYPE) {
+		/* Not custom, just pass through */
+		netdev_dbg(dev, "non-realtek ethertype 0x%04x\n", etype);
+		return skb;
+	}
+	p = (__be16 *)(tag + 2);
+	protport = ntohs(*p);
+	/* The 4 upper bits are the protocol */
+	prot = (protport >> RTL4_A_PROTOCOL_SHIFT) & 0x0f;
+	if (prot != RTL4_A_PROTOCOL_RTL8366RB) {
+		netdev_err(dev, "unknown realtek protocol 0x%01x\n", prot);
+		return NULL;
+	}
+	port = protport & 0xff;
+
+	skb->dev = dsa_master_find_slave(dev, 0, port);
+	if (!skb->dev) {
+		netdev_dbg(dev, "could not find slave for port %d\n", port);
+		return NULL;
+	}
+
+	/* Remove RTL4 tag and recalculate checksum */
+	skb_pull_rcsum(skb, RTL4_A_HDR_LEN);
+
+	dsa_strip_etype_header(skb, RTL4_A_HDR_LEN);
+
+	dsa_default_offload_fwd_mark(skb);
+
+	return skb;
+}
+
+static const struct dsa_device_ops rtl4a_netdev_ops = {
+	.name	= "rtl4a",
+	.proto	= DSA_TAG_PROTO_RTL4_A,
+	.xmit	= rtl4a_tag_xmit,
+	.rcv	= rtl4a_tag_rcv,
+	.needed_headroom = RTL4_A_HDR_LEN,
+};
+module_dsa_tag_driver(rtl4a_netdev_ops);
+
+MODULE_LICENSE("GPL");
+MODULE_ALIAS_DSA_TAG_DRIVER(DSA_TAG_PROTO_RTL4_A);