diff options
Diffstat (limited to 'sound/pci/hda')
| -rw-r--r-- | sound/pci/hda/patch_realtek.c | 68 |
1 files changed, 67 insertions, 1 deletions
diff --git a/sound/pci/hda/patch_realtek.c b/sound/pci/hda/patch_realtek.c index c8b0ec814375..219ddf0b8d43 100644 --- a/sound/pci/hda/patch_realtek.c +++ b/sound/pci/hda/patch_realtek.c @@ -395,6 +395,60 @@ static int alc_gpio_data_put(struct snd_kcontrol *kcontrol, struct snd_ctl_elem_ .private_value = nid | (mask<<16) } #endif /* CONFIG_SND_DEBUG */ +/* A switch control to allow the enabling of the digital IO pins on the + * ALC260. This is incredibly simplistic; the intention of this control is + * to provide something in the test model allowing digital outputs to be + * identified if present. If models are found which can utilise these + * outputs a more complete mixer control can be devised for those models if + * necessary. + */ +#ifdef CONFIG_SND_DEBUG +static int alc_spdif_ctrl_info(struct snd_kcontrol *kcontrol, struct snd_ctl_elem_info *uinfo) +{ + uinfo->type = SNDRV_CTL_ELEM_TYPE_BOOLEAN; + uinfo->count = 1; + uinfo->value.integer.min = 0; + uinfo->value.integer.max = 1; + return 0; +} +static int alc_spdif_ctrl_get(struct snd_kcontrol *kcontrol, struct snd_ctl_elem_value *ucontrol) +{ + struct hda_codec *codec = snd_kcontrol_chip(kcontrol); + hda_nid_t nid = kcontrol->private_value & 0xffff; + unsigned char mask = (kcontrol->private_value >> 16) & 0xff; + long *valp = ucontrol->value.integer.value; + unsigned int val = snd_hda_codec_read(codec,nid,0,AC_VERB_GET_DIGI_CONVERT,0x00); + + *valp = (val & mask) != 0; + return 0; +} +static int alc_spdif_ctrl_put(struct snd_kcontrol *kcontrol, struct snd_ctl_elem_value *ucontrol) +{ + signed int change; + struct hda_codec *codec = snd_kcontrol_chip(kcontrol); + hda_nid_t nid = kcontrol->private_value & 0xffff; + unsigned char mask = (kcontrol->private_value >> 16) & 0xff; + long val = *ucontrol->value.integer.value; + unsigned int ctrl_data = snd_hda_codec_read(codec,nid,0,AC_VERB_GET_DIGI_CONVERT,0x00); + + /* Set/unset the masked control bit(s) as needed */ + change = (val==0?0:mask) != (ctrl_data & mask); + if (val==0) + ctrl_data &= ~mask; + else + ctrl_data |= mask; + snd_hda_codec_write(codec,nid,0,AC_VERB_SET_DIGI_CONVERT_1,ctrl_data); + + return change; +} +#define ALC_SPDIF_CTRL_SWITCH(xname, nid, mask) \ + { .iface = SNDRV_CTL_ELEM_IFACE_MIXER, .name = xname, .index = 0, \ + .info = alc_spdif_ctrl_info, \ + .get = alc_spdif_ctrl_get, \ + .put = alc_spdif_ctrl_put, \ + .private_value = nid | (mask<<16) } +#endif /* CONFIG_SND_DEBUG */ + /* * set up from the preset table */ @@ -3048,6 +3102,13 @@ static struct snd_kcontrol_new alc260_test_mixer[] = { ALC_GPIO_DATA_SWITCH("GPIO pin 2", 0x01, 0x04), ALC_GPIO_DATA_SWITCH("GPIO pin 3", 0x01, 0x08), + /* Switches to allow the digital IO pins to be enabled. The datasheet + * is ambigious as to which NID is which; testing on laptops which + * make this output available should provide clarification. + */ + ALC_SPDIF_CTRL_SWITCH("SPDIF Playback Switch", 0x03, 0x01), + ALC_SPDIF_CTRL_SWITCH("SPDIF Capture Switch", 0x06, 0x01), + { } /* end */ }; static struct hda_verb alc260_test_init_verbs[] = { @@ -3064,7 +3125,12 @@ static struct hda_verb alc260_test_init_verbs[] = { {0x13, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT}, {0x12, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT}, - /* Disable digital (SPDIF) pins for now */ + /* Disable digital (SPDIF) pins initially, but users can enable + * them via a mixer switch. In the case of SPDIF-out, this initverb + * payload also sets the generation to 0, output to be in "consumer" + * PCM format, copyright asserted, no pre-emphasis and no validity + * control. + */ {0x03, AC_VERB_SET_DIGI_CONVERT_1, 0}, {0x06, AC_VERB_SET_DIGI_CONVERT_1, 0}, |