diff options
Diffstat (limited to 'sound/usb/quirks.c')
| -rw-r--r-- | sound/usb/quirks.c | 93 |
1 files changed, 91 insertions, 2 deletions
diff --git a/sound/usb/quirks.c b/sound/usb/quirks.c index 0f58b4b6d702..acc12f004c23 100644 --- a/sound/usb/quirks.c +++ b/sound/usb/quirks.c @@ -497,6 +497,92 @@ static int snd_usb_nativeinstruments_boot_quirk(struct usb_device *dev) return -EAGAIN; } +static void mbox2_setup_48_24_magic(struct usb_device *dev) +{ + u8 srate[3]; + u8 temp[12]; + + /* Choose 48000Hz permanently */ + srate[0] = 0x80; + srate[1] = 0xbb; + srate[2] = 0x00; + + /* Send the magic! */ + snd_usb_ctl_msg(dev, usb_rcvctrlpipe(dev, 0), + 0x01, 0x22, 0x0100, 0x0085, &temp, 0x0003); + snd_usb_ctl_msg(dev, usb_sndctrlpipe(dev, 0), + 0x81, 0xa2, 0x0100, 0x0085, &srate, 0x0003); + snd_usb_ctl_msg(dev, usb_sndctrlpipe(dev, 0), + 0x81, 0xa2, 0x0100, 0x0086, &srate, 0x0003); + snd_usb_ctl_msg(dev, usb_sndctrlpipe(dev, 0), + 0x81, 0xa2, 0x0100, 0x0003, &srate, 0x0003); + return; +} + +/* Digidesign Mbox 2 needs to load firmware onboard + * and driver must wait a few seconds for initialisation. + */ + +#define MBOX2_FIRMWARE_SIZE 646 +#define MBOX2_BOOT_LOADING 0x01 /* Hard coded into the device */ +#define MBOX2_BOOT_READY 0x02 /* Hard coded into the device */ + +static int snd_usb_mbox2_boot_quirk(struct usb_device *dev) +{ + struct usb_host_config *config = dev->actconfig; + int err; + u8 bootresponse[12]; + int fwsize; + int count; + + fwsize = le16_to_cpu(get_cfg_desc(config)->wTotalLength); + + if (fwsize != MBOX2_FIRMWARE_SIZE) { + snd_printk(KERN_ERR "usb-audio: Invalid firmware size=%d.\n", fwsize); + return -ENODEV; + } + + snd_printd("usb-audio: Sending Digidesign Mbox 2 boot sequence...\n"); + + count = 0; + bootresponse[0] = MBOX2_BOOT_LOADING; + while ((bootresponse[0] == MBOX2_BOOT_LOADING) && (count < 10)) { + msleep(500); /* 0.5 second delay */ + snd_usb_ctl_msg(dev, usb_rcvctrlpipe(dev, 0), + /* Control magic - load onboard firmware */ + 0x85, 0xc0, 0x0001, 0x0000, &bootresponse, 0x0012); + if (bootresponse[0] == MBOX2_BOOT_READY) + break; + snd_printd("usb-audio: device not ready, resending boot sequence...\n"); + count++; + } + + if (bootresponse[0] != MBOX2_BOOT_READY) { + snd_printk(KERN_ERR "usb-audio: Unknown bootresponse=%d, or timed out, ignoring device.\n", bootresponse[0]); + return -ENODEV; + } + + snd_printdd("usb-audio: device initialised!\n"); + + err = usb_get_descriptor(dev, USB_DT_DEVICE, 0, + &dev->descriptor, sizeof(dev->descriptor)); + config = dev->actconfig; + if (err < 0) + snd_printd("error usb_get_descriptor: %d\n", err); + + err = usb_reset_configuration(dev); + if (err < 0) + snd_printd("error usb_reset_configuration: %d\n", err); + snd_printdd("mbox2_boot: new boot length = %d\n", + le16_to_cpu(get_cfg_desc(config)->wTotalLength)); + + mbox2_setup_48_24_magic(dev); + + snd_printk(KERN_INFO "usb-audio: Digidesign Mbox 2: 24bit 48kHz"); + + return 0; /* Successful boot */ +} + /* * Setup quirks */ @@ -573,7 +659,6 @@ static int audiophile_skip_setting_quirk(struct snd_usb_audio *chip, return 0; /* keep this altsetting */ } - static int fasttrackpro_skip_setting_quirk(struct snd_usb_audio *chip, int iface, int altno) { @@ -655,6 +740,10 @@ int snd_usb_apply_boot_quirk(struct usb_device *dev, case USB_ID(0x0ccd, 0x00b1): /* Terratec Aureon 7.1 USB */ return snd_usb_cm6206_boot_quirk(dev); + case USB_ID(0x0dba, 0x3000): + /* Digidesign Mbox 2 */ + return snd_usb_mbox2_boot_quirk(dev); + case USB_ID(0x133e, 0x0815): /* Access Music VirusTI Desktop */ return snd_usb_accessmusic_boot_quirk(dev); @@ -675,7 +764,7 @@ int snd_usb_apply_boot_quirk(struct usb_device *dev, */ int snd_usb_is_big_endian_format(struct snd_usb_audio *chip, struct audioformat *fp) { - /* it depends on altsetting wether the device is big-endian or not */ + /* it depends on altsetting whether the device is big-endian or not */ switch (chip->usb_id) { case USB_ID(0x0763, 0x2001): /* M-Audio Quattro: captured data only */ if (fp->altsetting == 2 || fp->altsetting == 3 || |