diff options
Diffstat (limited to 'tools/power/pm-graph')
| -rw-r--r-- | tools/power/pm-graph/README | 4 | ||||
| -rwxr-xr-x | tools/power/pm-graph/sleepgraph.py | 387 |
2 files changed, 227 insertions, 164 deletions
diff --git a/tools/power/pm-graph/README b/tools/power/pm-graph/README index 89d0a7dab4bc..da468bd510ca 100644 --- a/tools/power/pm-graph/README +++ b/tools/power/pm-graph/README @@ -6,7 +6,7 @@ |_| |___/ |_| pm-graph: suspend/resume/boot timing analysis tools - Version: 5.7 + Version: 5.8 Author: Todd Brandt <todd.e.brandt@intel.com> Home Page: https://01.org/pm-graph @@ -61,7 +61,7 @@ - runs with python2 or python3, choice is made by /usr/bin/python link - python - python-configparser (for python2 sleepgraph) - - python-requests (for googlesheet.py) + - python-requests (for stresstester.py) - linux-tools-common (for turbostat usage in sleepgraph) Ubuntu: diff --git a/tools/power/pm-graph/sleepgraph.py b/tools/power/pm-graph/sleepgraph.py index 1bc36a1db14f..81f4b8abbdf7 100755 --- a/tools/power/pm-graph/sleepgraph.py +++ b/tools/power/pm-graph/sleepgraph.py @@ -81,7 +81,7 @@ def ascii(text): # store system values and test parameters class SystemValues: title = 'SleepGraph' - version = '5.7' + version = '5.8' ansi = False rs = 0 display = '' @@ -92,8 +92,9 @@ class SystemValues: testlog = True dmesglog = True ftracelog = False + acpidebug = True tstat = True - mindevlen = 0.0 + mindevlen = 0.0001 mincglen = 0.0 cgphase = '' cgtest = -1 @@ -115,6 +116,7 @@ class SystemValues: fpdtpath = '/sys/firmware/acpi/tables/FPDT' epath = '/sys/kernel/debug/tracing/events/power/' pmdpath = '/sys/power/pm_debug_messages' + acpipath='/sys/module/acpi/parameters/debug_level' traceevents = [ 'suspend_resume', 'wakeup_source_activate', @@ -162,16 +164,16 @@ class SystemValues: devdump = False mixedphaseheight = True devprops = dict() + cfgdef = dict() platinfo = [] predelay = 0 postdelay = 0 - pmdebug = '' tmstart = 'SUSPEND START %Y%m%d-%H:%M:%S.%f' tmend = 'RESUME COMPLETE %Y%m%d-%H:%M:%S.%f' tracefuncs = { 'sys_sync': {}, 'ksys_sync': {}, - 'pm_notifier_call_chain_robust': {}, + '__pm_notifier_call_chain': {}, 'pm_prepare_console': {}, 'pm_notifier_call_chain': {}, 'freeze_processes': {}, @@ -490,9 +492,9 @@ class SystemValues: call('echo 0 > %s/wakealarm' % self.rtcpath, shell=True) def initdmesg(self): # get the latest time stamp from the dmesg log - fp = Popen('dmesg', stdout=PIPE).stdout + lines = Popen('dmesg', stdout=PIPE).stdout.readlines() ktime = '0' - for line in fp: + for line in reversed(lines): line = ascii(line).replace('\r\n', '') idx = line.find('[') if idx > 1: @@ -500,7 +502,7 @@ class SystemValues: m = re.match('[ \t]*(\[ *)(?P<ktime>[0-9\.]*)(\]) (?P<msg>.*)', line) if(m): ktime = m.group('ktime') - fp.close() + break self.dmesgstart = float(ktime) def getdmesg(self, testdata): op = self.writeDatafileHeader(self.dmesgfile, testdata) @@ -715,8 +717,6 @@ class SystemValues: self.fsetVal('0', 'events/kprobes/enable') self.fsetVal('', 'kprobe_events') self.fsetVal('1024', 'buffer_size_kb') - if self.pmdebug: - self.setVal(self.pmdebug, self.pmdpath) def setupAllKprobes(self): for name in self.tracefuncs: self.defaultKprobe(name, self.tracefuncs[name]) @@ -740,11 +740,7 @@ class SystemValues: # turn trace off self.fsetVal('0', 'tracing_on') self.cleanupFtrace() - # pm debug messages - pv = self.getVal(self.pmdpath) - if pv != '1': - self.setVal('1', self.pmdpath) - self.pmdebug = pv + self.testVal(self.pmdpath, 'basic', '1') # set the trace clock to global self.fsetVal('global', 'trace_clock') self.fsetVal('nop', 'current_tracer') @@ -900,6 +896,14 @@ class SystemValues: if isgz: return gzip.open(filename, mode+'t') return open(filename, mode) + def putlog(self, filename, text): + with self.openlog(filename, 'a') as fp: + fp.write(text) + fp.close() + def dlog(self, text): + self.putlog(self.dmesgfile, '# %s\n' % text) + def flog(self, text): + self.putlog(self.ftracefile, text) def b64unzip(self, data): try: out = codecs.decode(base64.b64decode(data), 'zlib').decode() @@ -992,9 +996,7 @@ class SystemValues: # add a line for each of these commands with their outputs for name, cmdline, info in cmdafter: footer += '# platform-%s: %s | %s\n' % (name, cmdline, self.b64zip(info)) - - with self.openlog(self.ftracefile, 'a') as fp: - fp.write(footer) + self.flog(footer) return True def commonPrefix(self, list): if len(list) < 2: @@ -1034,6 +1036,7 @@ class SystemValues: cmdline, cmdpath = ' '.join(cargs[2:]), self.getExec(cargs[2]) if not cmdpath or (begin and not delta): continue + self.dlog('[%s]' % cmdline) try: fp = Popen([cmdpath]+cargs[3:], stdout=PIPE, stderr=PIPE).stdout info = ascii(fp.read()).strip() @@ -1060,6 +1063,29 @@ class SystemValues: else: out.append((name, cmdline, '\tnothing' if not info else info)) return out + def testVal(self, file, fmt='basic', value=''): + if file == 'restoreall': + for f in self.cfgdef: + if os.path.exists(f): + fp = open(f, 'w') + fp.write(self.cfgdef[f]) + fp.close() + self.cfgdef = dict() + elif value and os.path.exists(file): + fp = open(file, 'r+') + if fmt == 'radio': + m = re.match('.*\[(?P<v>.*)\].*', fp.read()) + if m: + self.cfgdef[file] = m.group('v') + elif fmt == 'acpi': + line = fp.read().strip().split('\n')[-1] + m = re.match('.* (?P<v>[0-9A-Fx]*) .*', line) + if m: + self.cfgdef[file] = m.group('v') + else: + self.cfgdef[file] = fp.read().strip() + fp.write(value) + fp.close() def haveTurbostat(self): if not self.tstat: return False @@ -1201,6 +1227,57 @@ class SystemValues: self.multitest[sz] *= 1440 elif unit == 'h': self.multitest[sz] *= 60 + def displayControl(self, cmd): + xset, ret = 'timeout 10 xset -d :0.0 {0}', 0 + if self.sudouser: + xset = 'sudo -u %s %s' % (self.sudouser, xset) + if cmd == 'init': + ret = call(xset.format('dpms 0 0 0'), shell=True) + if not ret: + ret = call(xset.format('s off'), shell=True) + elif cmd == 'reset': + ret = call(xset.format('s reset'), shell=True) + elif cmd in ['on', 'off', 'standby', 'suspend']: + b4 = self.displayControl('stat') + ret = call(xset.format('dpms force %s' % cmd), shell=True) + if not ret: + curr = self.displayControl('stat') + self.vprint('Display Switched: %s -> %s' % (b4, curr)) + if curr != cmd: + self.vprint('WARNING: Display failed to change to %s' % cmd) + if ret: + self.vprint('WARNING: Display failed to change to %s with xset' % cmd) + return ret + elif cmd == 'stat': + fp = Popen(xset.format('q').split(' '), stdout=PIPE).stdout + ret = 'unknown' + for line in fp: + m = re.match('[\s]*Monitor is (?P<m>.*)', ascii(line)) + if(m and len(m.group('m')) >= 2): + out = m.group('m').lower() + ret = out[3:] if out[0:2] == 'in' else out + break + fp.close() + return ret + def setRuntimeSuspend(self, before=True): + if before: + # runtime suspend disable or enable + if self.rs > 0: + self.rstgt, self.rsval, self.rsdir = 'on', 'auto', 'enabled' + else: + self.rstgt, self.rsval, self.rsdir = 'auto', 'on', 'disabled' + pprint('CONFIGURING RUNTIME SUSPEND...') + self.rslist = deviceInfo(self.rstgt) + for i in self.rslist: + self.setVal(self.rsval, i) + pprint('runtime suspend %s on all devices (%d changed)' % (self.rsdir, len(self.rslist))) + pprint('waiting 5 seconds...') + time.sleep(5) + else: + # runtime suspend re-enable or re-disable + for i in self.rslist: + self.setVal(self.rstgt, i) + pprint('runtime suspend settings restored on %d devices' % len(self.rslist)) sysvals = SystemValues() switchvalues = ['enable', 'disable', 'on', 'off', 'true', 'false', '1', '0'] @@ -1640,15 +1717,20 @@ class Data: if 'resume_machine' in phase and 'suspend_machine' in lp: tS, tR = self.dmesg[lp]['end'], self.dmesg[phase]['start'] tL = tR - tS - if tL > 0: - left = True if tR > tZero else False - self.trimTime(tS, tL, left) - if 'trying' in self.dmesg[lp] and self.dmesg[lp]['trying'] >= 0.001: - tTry = round(self.dmesg[lp]['trying'] * 1000) - text = '%.0f (-%.0f waking)' % (tL * 1000, tTry) + if tL <= 0: + continue + left = True if tR > tZero else False + self.trimTime(tS, tL, left) + if 'waking' in self.dmesg[lp]: + tCnt = self.dmesg[lp]['waking'][0] + if self.dmesg[lp]['waking'][1] >= 0.001: + tTry = '-%.0f' % (round(self.dmesg[lp]['waking'][1] * 1000)) else: - text = '%.0f' % (tL * 1000) - self.tLow.append(text) + tTry = '-%.3f' % (self.dmesg[lp]['waking'][1] * 1000) + text = '%.0f (%s ms waking %d times)' % (tL * 1000, tTry, tCnt) + else: + text = '%.0f' % (tL * 1000) + self.tLow.append(text) lp = phase def getMemTime(self): if not self.hwstart or not self.hwend: @@ -1921,7 +2003,7 @@ class Data: for dev in list: length = (list[dev]['end'] - list[dev]['start']) * 1000 width = widfmt % (((list[dev]['end']-list[dev]['start'])*100)/tTotal) - if width != '0.000000' and length >= mindevlen: + if length >= mindevlen: devlist.append(dev) self.tdevlist[phase] = devlist def addHorizontalDivider(self, devname, devend): @@ -3316,9 +3398,10 @@ def parseTraceLog(live=False): # trim out s2idle loops, track time trying to freeze llp = data.lastPhase(2) if llp.startswith('suspend_machine'): - if 'trying' not in data.dmesg[llp]: - data.dmesg[llp]['trying'] = 0 - data.dmesg[llp]['trying'] += \ + if 'waking' not in data.dmesg[llp]: + data.dmesg[llp]['waking'] = [0, 0.0] + data.dmesg[llp]['waking'][0] += 1 + data.dmesg[llp]['waking'][1] += \ t.time - data.dmesg[lp]['start'] data.currphase = '' del data.dmesg[lp] @@ -4555,7 +4638,7 @@ def createHTML(testruns, testfail): # draw the devices for this phase phaselist = data.dmesg[b]['list'] for d in sorted(data.tdevlist[b]): - dname = d if '[' not in d else d.split('[')[0] + dname = d if ('[' not in d or 'CPU' in d) else d.split('[')[0] name, dev = dname, phaselist[d] drv = xtraclass = xtrainfo = xtrastyle = '' if 'htmlclass' in dev: @@ -5194,156 +5277,146 @@ def addScriptCode(hf, testruns): '</script>\n' hf.write(script_code); -def setRuntimeSuspend(before=True): - global sysvals - sv = sysvals - if sv.rs == 0: - return - if before: - # runtime suspend disable or enable - if sv.rs > 0: - sv.rstgt, sv.rsval, sv.rsdir = 'on', 'auto', 'enabled' - else: - sv.rstgt, sv.rsval, sv.rsdir = 'auto', 'on', 'disabled' - pprint('CONFIGURING RUNTIME SUSPEND...') - sv.rslist = deviceInfo(sv.rstgt) - for i in sv.rslist: - sv.setVal(sv.rsval, i) - pprint('runtime suspend %s on all devices (%d changed)' % (sv.rsdir, len(sv.rslist))) - pprint('waiting 5 seconds...') - time.sleep(5) - else: - # runtime suspend re-enable or re-disable - for i in sv.rslist: - sv.setVal(sv.rstgt, i) - pprint('runtime suspend settings restored on %d devices' % len(sv.rslist)) - # Function: executeSuspend # Description: # Execute system suspend through the sysfs interface, then copy the output # dmesg and ftrace files to the test output directory. def executeSuspend(quiet=False): - pm = ProcessMonitor() - tp = sysvals.tpath - if sysvals.wifi: - wifi = sysvals.checkWifi() + sv, tp, pm = sysvals, sysvals.tpath, ProcessMonitor() + if sv.wifi: + wifi = sv.checkWifi() + sv.dlog('wifi check, connected device is "%s"' % wifi) testdata = [] # run these commands to prepare the system for suspend - if sysvals.display: + if sv.display: if not quiet: - pprint('SET DISPLAY TO %s' % sysvals.display.upper()) - displayControl(sysvals.display) + pprint('SET DISPLAY TO %s' % sv.display.upper()) + ret = sv.displayControl(sv.display) + sv.dlog('xset display %s, ret = %d' % (sv.display, ret)) time.sleep(1) - if sysvals.sync: + if sv.sync: if not quiet: pprint('SYNCING FILESYSTEMS') + sv.dlog('syncing filesystems') call('sync', shell=True) - # mark the start point in the kernel ring buffer just as we start - sysvals.initdmesg() + sv.dlog('read dmesg') + sv.initdmesg() # start ftrace - if(sysvals.usecallgraph or sysvals.usetraceevents): + if(sv.usecallgraph or sv.usetraceevents): if not quiet: pprint('START TRACING') - sysvals.fsetVal('1', 'tracing_on') - if sysvals.useprocmon: + sv.dlog('start ftrace tracing') + sv.fsetVal('1', 'tracing_on') + if sv.useprocmon: + sv.dlog('start the process monitor') pm.start() - sysvals.cmdinfo(True) + sv.dlog('run the cmdinfo list before') + sv.cmdinfo(True) # execute however many s/r runs requested - for count in range(1,sysvals.execcount+1): + for count in range(1,sv.execcount+1): # x2delay in between test runs - if(count > 1 and sysvals.x2delay > 0): - sysvals.fsetVal('WAIT %d' % sysvals.x2delay, 'trace_marker') - time.sleep(sysvals.x2delay/1000.0) - sysvals.fsetVal('WAIT END', 'trace_marker') + if(count > 1 and sv.x2delay > 0): + sv.fsetVal('WAIT %d' % sv.x2delay, 'trace_marker') + time.sleep(sv.x2delay/1000.0) + sv.fsetVal('WAIT END', 'trace_marker') # start message - if sysvals.testcommand != '': + if sv.testcommand != '': pprint('COMMAND START') else: - if(sysvals.rtcwake): + if(sv.rtcwake): pprint('SUSPEND START') else: pprint('SUSPEND START (press a key to resume)') # set rtcwake - if(sysvals.rtcwake): + if(sv.rtcwake): if not quiet: - pprint('will issue an rtcwake in %d seconds' % sysvals.rtcwaketime) - sysvals.rtcWakeAlarmOn() + pprint('will issue an rtcwake in %d seconds' % sv.rtcwaketime) + sv.dlog('enable RTC wake alarm') + sv.rtcWakeAlarmOn() # start of suspend trace marker - if(sysvals.usecallgraph or sysvals.usetraceevents): - sysvals.fsetVal(datetime.now().strftime(sysvals.tmstart), 'trace_marker') + if(sv.usecallgraph or sv.usetraceevents): + sv.fsetVal(datetime.now().strftime(sv.tmstart), 'trace_marker') # predelay delay - if(count == 1 and sysvals.predelay > 0): - sysvals.fsetVal('WAIT %d' % sysvals.predelay, 'trace_marker') - time.sleep(sysvals.predelay/1000.0) - sysvals.fsetVal('WAIT END', 'trace_marker') + if(count == 1 and sv.predelay > 0): + sv.fsetVal('WAIT %d' % sv.predelay, 'trace_marker') + time.sleep(sv.predelay/1000.0) + sv.fsetVal('WAIT END', 'trace_marker') # initiate suspend or command + sv.dlog('system executing a suspend') tdata = {'error': ''} - if sysvals.testcommand != '': - res = call(sysvals.testcommand+' 2>&1', shell=True); + if sv.testcommand != '': + res = call(sv.testcommand+' 2>&1', shell=True); if res != 0: tdata['error'] = 'cmd returned %d' % res else: - mode = sysvals.suspendmode - if sysvals.memmode and os.path.exists(sysvals.mempowerfile): + mode = sv.suspendmode + if sv.memmode and os.path.exists(sv.mempowerfile): mode = 'mem' - pf = open(sysvals.mempowerfile, 'w') - pf.write(sysvals.memmode) - pf.close() - if sysvals.diskmode and os.path.exists(sysvals.diskpowerfile): + sv.testVal(sv.mempowerfile, 'radio', sv.memmode) + if sv.diskmode and os.path.exists(sv.diskpowerfile): mode = 'disk' - pf = open(sysvals.diskpowerfile, 'w') - pf.write(sysvals.diskmode) - pf.close() - if mode == 'freeze' and sysvals.haveTurbostat(): + sv.testVal(sv.diskpowerfile, 'radio', sv.diskmode) + if sv.acpidebug: + sv.testVal(sv.acpipath, 'acpi', '0xe') + if mode == 'freeze' and sv.haveTurbostat(): # execution will pause here - turbo = sysvals.turbostat() + turbo = sv.turbostat() if turbo: tdata['turbo'] = turbo else: - pf = open(sysvals.powerfile, 'w') + pf = open(sv.powerfile, 'w') pf.write(mode) # execution will pause here try: pf.close() except Exception as e: tdata['error'] = str(e) - if(sysvals.rtcwake): - sysvals.rtcWakeAlarmOff() + sv.dlog('system returned from resume') + # reset everything + sv.testVal('restoreall') + if(sv.rtcwake): + sv.dlog('disable RTC wake alarm') + sv.rtcWakeAlarmOff() # postdelay delay - if(count == sysvals.execcount and sysvals.postdelay > 0): - sysvals.fsetVal('WAIT %d' % sysvals.postdelay, 'trace_marker') - time.sleep(sysvals.postdelay/1000.0) - sysvals.fsetVal('WAIT END', 'trace_marker') + if(count == sv.execcount and sv.postdelay > 0): + sv.fsetVal('WAIT %d' % sv.postdelay, 'trace_marker') + time.sleep(sv.postdelay/1000.0) + sv.fsetVal('WAIT END', 'trace_marker') # return from suspend pprint('RESUME COMPLETE') - if(sysvals.usecallgraph or sysvals.usetraceevents): - sysvals.fsetVal(datetime.now().strftime(sysvals.tmend), 'trace_marker') - if sysvals.wifi and wifi: - tdata['wifi'] = sysvals.pollWifi(wifi) - if(sysvals.suspendmode == 'mem' or sysvals.suspendmode == 'command'): + if(sv.usecallgraph or sv.usetraceevents): + sv.fsetVal(datetime.now().strftime(sv.tmend), 'trace_marker') + if sv.wifi and wifi: + tdata['wifi'] = sv.pollWifi(wifi) + sv.dlog('wifi check, %s' % tdata['wifi']) + if(sv.suspendmode == 'mem' or sv.suspendmode == 'command'): + sv.dlog('read the ACPI FPDT') tdata['fw'] = getFPDT(False) testdata.append(tdata) - cmdafter = sysvals.cmdinfo(False) + sv.dlog('run the cmdinfo list after') + cmdafter = sv.cmdinfo(False) # stop ftrace - if(sysvals.usecallgraph or sysvals.usetraceevents): - if sysvals.useprocmon: + if(sv.usecallgraph or sv.usetraceevents): + if sv.useprocmon: + sv.dlog('stop the process monitor') pm.stop() - sysvals.fsetVal('0', 'tracing_on') + sv.fsetVal('0', 'tracing_on') # grab a copy of the dmesg output if not quiet: pprint('CAPTURING DMESG') - sysvals.getdmesg(testdata) + sysvals.dlog('EXECUTION TRACE END') + sv.getdmesg(testdata) # grab a copy of the ftrace output - if(sysvals.usecallgraph or sysvals.usetraceevents): + if(sv.usecallgraph or sv.usetraceevents): if not quiet: pprint('CAPTURING TRACE') - op = sysvals.writeDatafileHeader(sysvals.ftracefile, testdata) + op = sv.writeDatafileHeader(sv.ftracefile, testdata) fp = open(tp+'trace', 'r') for line in fp: op.write(line) op.close() - sysvals.fsetVal('', 'trace') - sysvals.platforminfo(cmdafter) + sv.fsetVal('', 'trace') + sv.platforminfo(cmdafter) def readFile(file): if os.path.islink(file): @@ -5586,39 +5659,6 @@ def dmidecode(mempath, fatal=False): count += 1 return out -def displayControl(cmd): - xset, ret = 'timeout 10 xset -d :0.0 {0}', 0 - if sysvals.sudouser: - xset = 'sudo -u %s %s' % (sysvals.sudouser, xset) - if cmd == 'init': - ret = call(xset.format('dpms 0 0 0'), shell=True) - if not ret: - ret = call(xset.format('s off'), shell=True) - elif cmd == 'reset': - ret = call(xset.format('s reset'), shell=True) - elif cmd in ['on', 'off', 'standby', 'suspend']: - b4 = displayControl('stat') - ret = call(xset.format('dpms force %s' % cmd), shell=True) - if not ret: - curr = displayControl('stat') - sysvals.vprint('Display Switched: %s -> %s' % (b4, curr)) - if curr != cmd: - sysvals.vprint('WARNING: Display failed to change to %s' % cmd) - if ret: - sysvals.vprint('WARNING: Display failed to change to %s with xset' % cmd) - return ret - elif cmd == 'stat': - fp = Popen(xset.format('q').split(' '), stdout=PIPE).stdout - ret = 'unknown' - for line in fp: - m = re.match('[\s]*Monitor is (?P<m>.*)', ascii(line)) - if(m and len(m.group('m')) >= 2): - out = m.group('m').lower() - ret = out[3:] if out[0:2] == 'in' else out - break - fp.close() - return ret - # Function: getFPDT # Description: # Read the acpi bios tables and pull out FPDT, the firmware data @@ -6001,8 +6041,19 @@ def rerunTest(htmlfile=''): # execute a suspend/resume, gather the logs, and generate the output def runTest(n=0, quiet=False): # prepare for the test - sysvals.initFtrace(quiet) sysvals.initTestOutput('suspend') + op = sysvals.writeDatafileHeader(sysvals.dmesgfile, []) + op.write('# EXECUTION TRACE START\n') + op.close() + if n <= 1: + if sysvals.rs != 0: + sysvals.dlog('%sabling runtime suspend' % ('en' if sysvals.rs > 0 else 'dis')) + sysvals.setRuntimeSuspend(True) + if sysvals.display: + ret = sysvals.displayControl('init') + sysvals.dlog('xset display init, ret = %d' % ret) + sysvals.dlog('initialize ftrace') + sysvals.initFtrace(quiet) # execute the test executeSuspend(quiet) @@ -6098,8 +6149,16 @@ def data_from_html(file, outpath, issues, fulldetail=False): if wifi: extra['wifi'] = wifi low = find_in_html(html, 'freeze time: <b>', ' ms</b>') - if low and 'waking' in low: - issue = 'FREEZEWAKE' + for lowstr in ['waking', '+']: + if not low: + break + if lowstr not in low: + continue + if lowstr == '+': + issue = 'S2LOOPx%d' % len(low.split('+')) + else: + m = re.match('.*waking *(?P<n>[0-9]*) *times.*', low) + issue = 'S2WAKEx%s' % m.group('n') if m else 'S2WAKExNaN' match = [i for i in issues if i['match'] == issue] if len(match) > 0: match[0]['count'] += 1 @@ -6605,6 +6664,11 @@ if __name__ == '__main__': val = next(args) except: doError('-info requires one string argument', True) + elif(arg == '-desc'): + try: + val = next(args) + except: + doError('-desc requires one string argument', True) elif(arg == '-rs'): try: val = next(args) @@ -6814,9 +6878,9 @@ if __name__ == '__main__': runSummary(sysvals.outdir, True, genhtml) elif(cmd in ['xon', 'xoff', 'xstandby', 'xsuspend', 'xinit', 'xreset']): sysvals.verbose = True - ret = displayControl(cmd[1:]) + ret = sysvals.displayControl(cmd[1:]) elif(cmd == 'xstat'): - pprint('Display Status: %s' % displayControl('stat').upper()) + pprint('Display Status: %s' % sysvals.displayControl('stat').upper()) elif(cmd == 'wificheck'): dev = sysvals.checkWifi() if dev: @@ -6854,12 +6918,8 @@ if __name__ == '__main__': if mode.startswith('disk-'): sysvals.diskmode = mode.split('-', 1)[-1] sysvals.suspendmode = 'disk' - sysvals.systemInfo(dmidecode(sysvals.mempath)) - setRuntimeSuspend(True) - if sysvals.display: - displayControl('init') failcnt, ret = 0, 0 if sysvals.multitest['run']: # run multiple tests in a separate subdirectory @@ -6900,7 +6960,10 @@ if __name__ == '__main__': sysvals.testdir = sysvals.outdir # run the test in the current directory ret = runTest() + + # reset to default values after testing if sysvals.display: - displayControl('reset') - setRuntimeSuspend(False) + sysvals.displayControl('reset') + if sysvals.rs != 0: + sysvals.setRuntimeSuspend(False) sys.exit(ret) |