diff options
Diffstat (limited to '')
3 files changed, 678 insertions, 106 deletions
diff --git a/tools/testing/selftests/drivers/net/ocelot/basic_qos.sh b/tools/testing/selftests/drivers/net/ocelot/basic_qos.sh new file mode 100755 index 000000000000..c51c83421c61 --- /dev/null +++ b/tools/testing/selftests/drivers/net/ocelot/basic_qos.sh @@ -0,0 +1,253 @@ +#!/bin/bash +# SPDX-License-Identifier: GPL-2.0 +# Copyright 2022 NXP + +# The script is mostly generic, with the exception of the +# ethtool per-TC counter names ("rx_green_prio_${tc}") + +WAIT_TIME=1 +NUM_NETIFS=4 +STABLE_MAC_ADDRS=yes +NETIF_CREATE=no +lib_dir=$(dirname $0)/../../../net/forwarding +source $lib_dir/tc_common.sh +source $lib_dir/lib.sh + +require_command dcb + +h1=${NETIFS[p1]} +swp1=${NETIFS[p2]} +swp2=${NETIFS[p3]} +h2=${NETIFS[p4]} + +H1_IPV4="192.0.2.1" +H2_IPV4="192.0.2.2" +H1_IPV6="2001:db8:1::1" +H2_IPV6="2001:db8:1::2" + +h1_create() +{ + simple_if_init $h1 $H1_IPV4/24 $H1_IPV6/64 +} + +h1_destroy() +{ + simple_if_fini $h1 $H1_IPV4/24 $H1_IPV6/64 +} + +h2_create() +{ + simple_if_init $h2 $H2_IPV4/24 $H2_IPV6/64 +} + +h2_destroy() +{ + simple_if_fini $h2 $H2_IPV4/24 $H2_IPV6/64 +} + +h1_vlan_create() +{ + local vid=$1 + + vlan_create $h1 $vid + simple_if_init $h1.$vid $H1_IPV4/24 $H1_IPV6/64 + ip link set $h1.$vid type vlan \ + egress-qos-map 0:0 1:1 2:2 3:3 4:4 5:5 6:6 7:7 \ + ingress-qos-map 0:0 1:1 2:2 3:3 4:4 5:5 6:6 7:7 +} + +h1_vlan_destroy() +{ + local vid=$1 + + simple_if_fini $h1.$vid $H1_IPV4/24 $H1_IPV6/64 + vlan_destroy $h1 $vid +} + +h2_vlan_create() +{ + local vid=$1 + + vlan_create $h2 $vid + simple_if_init $h2.$vid $H2_IPV4/24 $H2_IPV6/64 + ip link set $h2.$vid type vlan \ + egress-qos-map 0:0 1:1 2:2 3:3 4:4 5:5 6:6 7:7 \ + ingress-qos-map 0:0 1:1 2:2 3:3 4:4 5:5 6:6 7:7 +} + +h2_vlan_destroy() +{ + local vid=$1 + + simple_if_fini $h2.$vid $H2_IPV4/24 $H2_IPV6/64 + vlan_destroy $h2 $vid +} + +vlans_prepare() +{ + h1_vlan_create 100 + h2_vlan_create 100 + + tc qdisc add dev ${h1}.100 clsact + tc filter add dev ${h1}.100 egress protocol ipv4 \ + flower ip_proto icmp action skbedit priority 3 + tc filter add dev ${h1}.100 egress protocol ipv6 \ + flower ip_proto icmpv6 action skbedit priority 3 +} + +vlans_destroy() +{ + tc qdisc del dev ${h1}.100 clsact + + h1_vlan_destroy 100 + h2_vlan_destroy 100 +} + +switch_create() +{ + ip link set ${swp1} up + ip link set ${swp2} up + + # Ports should trust VLAN PCP even with vlan_filtering=0 + ip link add br0 type bridge + ip link set ${swp1} master br0 + ip link set ${swp2} master br0 + ip link set br0 up +} + +switch_destroy() +{ + ip link del br0 +} + +setup_prepare() +{ + vrf_prepare + + h1_create + h2_create + switch_create +} + +cleanup() +{ + pre_cleanup + + h2_destroy + h1_destroy + switch_destroy + + vrf_cleanup +} + +dscp_cs_to_tos() +{ + local dscp_cs=$1 + + # https://datatracker.ietf.org/doc/html/rfc2474 + # 4.2.2.1 The Class Selector Codepoints + echo $((${dscp_cs} << 5)) +} + +run_test() +{ + local test_name=$1; shift + local if_name=$1; shift + local tc=$1; shift + local tos=$1; shift + local counter_name="rx_green_prio_${tc}" + local ipv4_before + local ipv4_after + local ipv6_before + local ipv6_after + + ipv4_before=$(ethtool_stats_get ${swp1} "${counter_name}") + ping_do ${if_name} $H2_IPV4 "-Q ${tos}" + ipv4_after=$(ethtool_stats_get ${swp1} "${counter_name}") + + if [ $((${ipv4_after} - ${ipv4_before})) -lt ${PING_COUNT} ]; then + RET=1 + else + RET=0 + fi + log_test "IPv4 ${test_name}" + + ipv6_before=$(ethtool_stats_get ${swp1} "${counter_name}") + ping_do ${if_name} $H2_IPV6 "-Q ${tos}" + ipv6_after=$(ethtool_stats_get ${swp1} "${counter_name}") + + if [ $((${ipv6_after} - ${ipv6_before})) -lt ${PING_COUNT} ]; then + RET=1 + else + RET=0 + fi + log_test "IPv6 ${test_name}" +} + +port_default_prio_get() +{ + local if_name=$1 + local prio + + prio="$(dcb -j app show dev ${if_name} default-prio | \ + jq '.default_prio[]')" + if [ -z "${prio}" ]; then + prio=0 + fi + + echo ${prio} +} + +test_port_default() +{ + local orig=$(port_default_prio_get ${swp1}) + local dmac=$(mac_get ${h2}) + + dcb app replace dev ${swp1} default-prio 5 + + run_test "Port-default QoS classification" ${h1} 5 0 + + dcb app replace dev ${swp1} default-prio ${orig} +} + +test_vlan_pcp() +{ + vlans_prepare + + run_test "Trusted VLAN PCP QoS classification" ${h1}.100 3 0 + + vlans_destroy +} + +test_ip_dscp() +{ + local port_default=$(port_default_prio_get ${swp1}) + local tos=$(dscp_cs_to_tos 4) + + dcb app add dev ${swp1} dscp-prio CS4:4 + run_test "Trusted DSCP QoS classification" ${h1} 4 ${tos} + dcb app del dev ${swp1} dscp-prio CS4:4 + + vlans_prepare + run_test "Untrusted DSCP QoS classification follows VLAN PCP" \ + ${h1}.100 3 ${tos} + vlans_destroy + + run_test "Untrusted DSCP QoS classification follows port default" \ + ${h1} ${port_default} ${tos} +} + +trap cleanup EXIT + +ALL_TESTS=" + test_port_default + test_vlan_pcp + test_ip_dscp +" + +setup_prepare +setup_wait + +tests_run + +exit $EXIT_STATUS diff --git a/tools/testing/selftests/drivers/net/ocelot/psfp.sh b/tools/testing/selftests/drivers/net/ocelot/psfp.sh new file mode 100755 index 000000000000..bed748dde4b0 --- /dev/null +++ b/tools/testing/selftests/drivers/net/ocelot/psfp.sh @@ -0,0 +1,327 @@ +#!/bin/bash +# SPDX-License-Identifier: GPL-2.0 +# Copyright 2021-2022 NXP + +# Note: On LS1028A, in lack of enough user ports, this setup requires patching +# the device tree to use the second CPU port as a user port + +WAIT_TIME=1 +NUM_NETIFS=4 +STABLE_MAC_ADDRS=yes +NETIF_CREATE=no +lib_dir=$(dirname $0)/../../../net/forwarding +source $lib_dir/tc_common.sh +source $lib_dir/lib.sh +source $lib_dir/tsn_lib.sh + +UDS_ADDRESS_H1="/var/run/ptp4l_h1" +UDS_ADDRESS_SWP1="/var/run/ptp4l_swp1" + +# Tunables +NUM_PKTS=1000 +STREAM_VID=100 +STREAM_PRIO=6 +# Use a conservative cycle of 10 ms to allow the test to still pass when the +# kernel has some extra overhead like lockdep etc +CYCLE_TIME_NS=10000000 +# Create two Gate Control List entries, one OPEN and one CLOSE, of equal +# durations +GATE_DURATION_NS=$((${CYCLE_TIME_NS} / 2)) +# Give 2/3 of the cycle time to user space and 1/3 to the kernel +FUDGE_FACTOR=$((${CYCLE_TIME_NS} / 3)) +# Shift the isochron base time by half the gate time, so that packets are +# always received by swp1 close to the middle of the time slot, to minimize +# inaccuracies due to network sync +SHIFT_TIME_NS=$((${GATE_DURATION_NS} / 2)) + +h1=${NETIFS[p1]} +swp1=${NETIFS[p2]} +swp2=${NETIFS[p3]} +h2=${NETIFS[p4]} + +H1_IPV4="192.0.2.1" +H2_IPV4="192.0.2.2" +H1_IPV6="2001:db8:1::1" +H2_IPV6="2001:db8:1::2" + +# Chain number exported by the ocelot driver for +# Per-Stream Filtering and Policing filters +PSFP() +{ + echo 30000 +} + +psfp_chain_create() +{ + local if_name=$1 + + tc qdisc add dev $if_name clsact + + tc filter add dev $if_name ingress chain 0 pref 49152 flower \ + skip_sw action goto chain $(PSFP) +} + +psfp_chain_destroy() +{ + local if_name=$1 + + tc qdisc del dev $if_name clsact +} + +psfp_filter_check() +{ + local expected=$1 + local packets="" + local drops="" + local stats="" + + stats=$(tc -j -s filter show dev ${swp1} ingress chain $(PSFP) pref 1) + packets=$(echo ${stats} | jq ".[1].options.actions[].stats.packets") + drops=$(echo ${stats} | jq ".[1].options.actions[].stats.drops") + + if ! [ "${packets}" = "${expected}" ]; then + printf "Expected filter to match on %d packets but matched on %d instead\n" \ + "${expected}" "${packets}" + fi + + echo "Hardware filter reports ${drops} drops" +} + +h1_create() +{ + simple_if_init $h1 $H1_IPV4/24 $H1_IPV6/64 +} + +h1_destroy() +{ + simple_if_fini $h1 $H1_IPV4/24 $H1_IPV6/64 +} + +h2_create() +{ + simple_if_init $h2 $H2_IPV4/24 $H2_IPV6/64 +} + +h2_destroy() +{ + simple_if_fini $h2 $H2_IPV4/24 $H2_IPV6/64 +} + +switch_create() +{ + local h2_mac_addr=$(mac_get $h2) + + ip link set ${swp1} up + ip link set ${swp2} up + + ip link add br0 type bridge vlan_filtering 1 + ip link set ${swp1} master br0 + ip link set ${swp2} master br0 + ip link set br0 up + + bridge vlan add dev ${swp2} vid ${STREAM_VID} + bridge vlan add dev ${swp1} vid ${STREAM_VID} + # PSFP on Ocelot requires the filter to also be added to the bridge + # FDB, and not be removed + bridge fdb add dev ${swp2} \ + ${h2_mac_addr} vlan ${STREAM_VID} static master + + psfp_chain_create ${swp1} + + tc filter add dev ${swp1} ingress chain $(PSFP) pref 1 \ + protocol 802.1Q flower skip_sw \ + dst_mac ${h2_mac_addr} vlan_id ${STREAM_VID} \ + action gate base-time 0.000000000 \ + sched-entry OPEN ${GATE_DURATION_NS} -1 -1 \ + sched-entry CLOSE ${GATE_DURATION_NS} -1 -1 +} + +switch_destroy() +{ + psfp_chain_destroy ${swp1} + ip link del br0 +} + +txtime_setup() +{ + local if_name=$1 + + tc qdisc add dev ${if_name} clsact + # Classify PTP on TC 7 and isochron on TC 6 + tc filter add dev ${if_name} egress protocol 0x88f7 \ + flower action skbedit priority 7 + tc filter add dev ${if_name} egress protocol 802.1Q \ + flower vlan_ethtype 0xdead action skbedit priority 6 + tc qdisc add dev ${if_name} handle 100: parent root mqprio num_tc 8 \ + queues 1@0 1@1 1@2 1@3 1@4 1@5 1@6 1@7 \ + map 0 1 2 3 4 5 6 7 \ + hw 1 + # Set up TC 6 for SO_TXTIME. tc-mqprio queues count from 1. + tc qdisc replace dev ${if_name} parent 100:$((${STREAM_PRIO} + 1)) etf \ + clockid CLOCK_TAI offload delta ${FUDGE_FACTOR} +} + +txtime_cleanup() +{ + local if_name=$1 + + tc qdisc del dev ${if_name} root + tc qdisc del dev ${if_name} clsact +} + +setup_prepare() +{ + vrf_prepare + + h1_create + h2_create + switch_create + + txtime_setup ${h1} + + # Set up swp1 as a master PHC for h1, synchronized to the local + # CLOCK_REALTIME. + phc2sys_start ${UDS_ADDRESS_SWP1} + + # Assumption true for LS1028A: h1 and h2 use the same PHC. So by + # synchronizing h1 to swp1 via PTP, h2 is also implicitly synchronized + # to swp1 (and both to CLOCK_REALTIME). + ptp4l_start ${h1} true ${UDS_ADDRESS_H1} + ptp4l_start ${swp1} false ${UDS_ADDRESS_SWP1} + + # Make sure there are no filter matches at the beginning of the test + psfp_filter_check 0 +} + +cleanup() +{ + pre_cleanup + + ptp4l_stop ${swp1} + ptp4l_stop ${h1} + phc2sys_stop + isochron_recv_stop + + txtime_cleanup ${h1} + + h2_destroy + h1_destroy + switch_destroy + + vrf_cleanup +} + +debug_incorrectly_dropped_packets() +{ + local isochron_dat=$1 + local dropped_seqids + local seqid + + echo "Packets incorrectly dropped:" + + dropped_seqids=$(isochron report \ + --input-file "${isochron_dat}" \ + --printf-format "%u RX hw %T\n" \ + --printf-args "qR" | \ + grep 'RX hw 0.000000000' | \ + awk '{print $1}') + + for seqid in ${dropped_seqids}; do + isochron report \ + --input-file "${isochron_dat}" \ + --start ${seqid} --stop ${seqid} \ + --printf-format "seqid %u scheduled for %T, HW TX timestamp %T\n" \ + --printf-args "qST" + done +} + +debug_incorrectly_received_packets() +{ + local isochron_dat=$1 + + echo "Packets incorrectly received:" + + isochron report \ + --input-file "${isochron_dat}" \ + --printf-format "seqid %u scheduled for %T, HW TX timestamp %T, HW RX timestamp %T\n" \ + --printf-args "qSTR" | + grep -v 'HW RX timestamp 0.000000000' +} + +run_test() +{ + local base_time=$1 + local expected=$2 + local test_name=$3 + local debug=$4 + local isochron_dat="$(mktemp)" + local extra_args="" + local received + + isochron_do \ + "${h1}" \ + "${h2}" \ + "${UDS_ADDRESS_H1}" \ + "" \ + "${base_time}" \ + "${CYCLE_TIME_NS}" \ + "${SHIFT_TIME_NS}" \ + "${NUM_PKTS}" \ + "${STREAM_VID}" \ + "${STREAM_PRIO}" \ + "" \ + "${isochron_dat}" + + # Count all received packets by looking at the non-zero RX timestamps + received=$(isochron report \ + --input-file "${isochron_dat}" \ + --printf-format "%u\n" --printf-args "R" | \ + grep -w -v '0' | wc -l) + + if [ "${received}" = "${expected}" ]; then + RET=0 + else + RET=1 + echo "Expected isochron to receive ${expected} packets but received ${received}" + fi + + log_test "${test_name}" + + if [ "$RET" = "1" ]; then + ${debug} "${isochron_dat}" + fi + + rm ${isochron_dat} 2> /dev/null +} + +test_gate_in_band() +{ + # Send packets in-band with the OPEN gate entry + run_test 0.000000000 ${NUM_PKTS} "In band" \ + debug_incorrectly_dropped_packets + + psfp_filter_check ${NUM_PKTS} +} + +test_gate_out_of_band() +{ + # Send packets in-band with the CLOSE gate entry + run_test 0.005000000 0 "Out of band" \ + debug_incorrectly_received_packets + + psfp_filter_check $((2 * ${NUM_PKTS})) +} + +trap cleanup EXIT + +ALL_TESTS=" + test_gate_in_band + test_gate_out_of_band +" + +setup_prepare +setup_wait + +tests_run + +exit $EXIT_STATUS diff --git a/tools/testing/selftests/drivers/net/ocelot/tc_flower_chains.sh b/tools/testing/selftests/drivers/net/ocelot/tc_flower_chains.sh index eaf8a04a7ca5..9c79bbcce5a8 100755 --- a/tools/testing/selftests/drivers/net/ocelot/tc_flower_chains.sh +++ b/tools/testing/selftests/drivers/net/ocelot/tc_flower_chains.sh @@ -4,35 +4,17 @@ WAIT_TIME=1 NUM_NETIFS=4 +STABLE_MAC_ADDRS=yes lib_dir=$(dirname $0)/../../../net/forwarding source $lib_dir/tc_common.sh source $lib_dir/lib.sh require_command tcpdump -# -# +---------------------------------------------+ -# | DUT ports Generator ports | -# | +--------+ +--------+ +--------+ +--------+ | -# | | | | | | | | | | -# | | eth0 | | eth1 | | eth2 | | eth3 | | -# | | | | | | | | | | -# +-+--------+-+--------+-+--------+-+--------+-+ -# | | | | -# | | | | -# | +-----------+ | -# | | -# +--------------------------------+ - -eth0=${NETIFS[p1]} -eth1=${NETIFS[p2]} -eth2=${NETIFS[p3]} -eth3=${NETIFS[p4]} - -eth0_mac="de:ad:be:ef:00:00" -eth1_mac="de:ad:be:ef:00:01" -eth2_mac="de:ad:be:ef:00:02" -eth3_mac="de:ad:be:ef:00:03" +h1=${NETIFS[p1]} +swp1=${NETIFS[p2]} +swp2=${NETIFS[p3]} +h2=${NETIFS[p4]} # Helpers to map a VCAP IS1 and VCAP IS2 lookup and policy to a chain number # used by the kernel driver. The numbers are: @@ -156,190 +138,200 @@ create_tcam_skeleton() setup_prepare() { - ip link set $eth0 up - ip link set $eth1 up - ip link set $eth2 up - ip link set $eth3 up + ip link set $swp1 up + ip link set $swp2 up + ip link set $h2 up + ip link set $h1 up - create_tcam_skeleton $eth0 + create_tcam_skeleton $swp1 ip link add br0 type bridge - ip link set $eth0 master br0 - ip link set $eth1 master br0 + ip link set $swp1 master br0 + ip link set $swp2 master br0 ip link set br0 up - ip link add link $eth3 name $eth3.100 type vlan id 100 - ip link set $eth3.100 up + ip link add link $h1 name $h1.100 type vlan id 100 + ip link set $h1.100 up - ip link add link $eth3 name $eth3.200 type vlan id 200 - ip link set $eth3.200 up + ip link add link $h1 name $h1.200 type vlan id 200 + ip link set $h1.200 up - tc filter add dev $eth0 ingress chain $(IS1 1) pref 1 \ + tc filter add dev $swp1 ingress chain $(IS1 1) pref 1 \ protocol 802.1Q flower skip_sw vlan_id 100 \ action vlan pop \ action goto chain $(IS1 2) - tc filter add dev $eth0 egress chain $(ES0) pref 1 \ - flower skip_sw indev $eth1 \ + tc filter add dev $swp1 egress chain $(ES0) pref 1 \ + flower skip_sw indev $swp2 \ action vlan push protocol 802.1Q id 100 - tc filter add dev $eth0 ingress chain $(IS1 0) pref 2 \ + tc filter add dev $swp1 ingress chain $(IS1 0) pref 2 \ protocol ipv4 flower skip_sw src_ip 10.1.1.2 \ action skbedit priority 7 \ action goto chain $(IS1 1) - tc filter add dev $eth0 ingress chain $(IS2 0 0) pref 1 \ + tc filter add dev $swp1 ingress chain $(IS2 0 0) pref 1 \ protocol ipv4 flower skip_sw ip_proto udp dst_port 5201 \ - action police rate 50mbit burst 64k \ + action police rate 50mbit burst 64k conform-exceed drop/pipe \ action goto chain $(IS2 1 0) } cleanup() { - ip link del $eth3.200 - ip link del $eth3.100 - tc qdisc del dev $eth0 clsact + ip link del $h1.200 + ip link del $h1.100 + tc qdisc del dev $swp1 clsact ip link del br0 } test_vlan_pop() { - printf "Testing VLAN pop.. " + local h1_mac=$(mac_get $h1) + local h2_mac=$(mac_get $h2) + + RET=0 - tcpdump_start $eth2 + tcpdump_start $h2 # Work around Mausezahn VLAN builder bug # (https://github.com/netsniff-ng/netsniff-ng/issues/225) by using # an 8021q upper - $MZ $eth3.100 -q -c 1 -p 64 -a $eth3_mac -b $eth2_mac -t ip + $MZ $h1.100 -q -c 1 -p 64 -a $h1_mac -b $h2_mac -t ip sleep 1 - tcpdump_stop + tcpdump_stop $h2 - if tcpdump_show | grep -q "$eth3_mac > $eth2_mac, ethertype IPv4"; then - echo "OK" - else - echo "FAIL" - fi + tcpdump_show $h2 | grep -q "$h1_mac > $h2_mac, ethertype IPv4" + check_err "$?" "untagged reception" + + tcpdump_cleanup $h2 - tcpdump_cleanup + log_test "VLAN pop" } test_vlan_push() { - printf "Testing VLAN push.. " + local h1_mac=$(mac_get $h1) + local h2_mac=$(mac_get $h2) - tcpdump_start $eth3.100 + RET=0 - $MZ $eth2 -q -c 1 -p 64 -a $eth2_mac -b $eth3_mac -t ip + tcpdump_start $h1.100 + + $MZ $h2 -q -c 1 -p 64 -a $h2_mac -b $h1_mac -t ip sleep 1 - tcpdump_stop + tcpdump_stop $h1.100 - if tcpdump_show | grep -q "$eth2_mac > $eth3_mac"; then - echo "OK" - else - echo "FAIL" - fi + tcpdump_show $h1.100 | grep -q "$h2_mac > $h1_mac" + check_err "$?" "tagged reception" - tcpdump_cleanup + tcpdump_cleanup $h1.100 + + log_test "VLAN push" } test_vlan_ingress_modify() { - printf "Testing ingress VLAN modification.. " + local h1_mac=$(mac_get $h1) + local h2_mac=$(mac_get $h2) + + RET=0 ip link set br0 type bridge vlan_filtering 1 - bridge vlan add dev $eth0 vid 200 - bridge vlan add dev $eth0 vid 300 - bridge vlan add dev $eth1 vid 300 + bridge vlan add dev $swp1 vid 200 + bridge vlan add dev $swp1 vid 300 + bridge vlan add dev $swp2 vid 300 - tc filter add dev $eth0 ingress chain $(IS1 2) pref 3 \ + tc filter add dev $swp1 ingress chain $(IS1 2) pref 3 \ protocol 802.1Q flower skip_sw vlan_id 200 \ action vlan modify id 300 \ action goto chain $(IS2 0 0) - tcpdump_start $eth2 + tcpdump_start $h2 - $MZ $eth3.200 -q -c 1 -p 64 -a $eth3_mac -b $eth2_mac -t ip + $MZ $h1.200 -q -c 1 -p 64 -a $h1_mac -b $h2_mac -t ip sleep 1 - tcpdump_stop + tcpdump_stop $h2 - if tcpdump_show | grep -q "$eth3_mac > $eth2_mac, .* vlan 300"; then - echo "OK" - else - echo "FAIL" - fi + tcpdump_show $h2 | grep -q "$h1_mac > $h2_mac, .* vlan 300" + check_err "$?" "tagged reception" - tcpdump_cleanup + tcpdump_cleanup $h2 - tc filter del dev $eth0 ingress chain $(IS1 2) pref 3 + tc filter del dev $swp1 ingress chain $(IS1 2) pref 3 - bridge vlan del dev $eth0 vid 200 - bridge vlan del dev $eth0 vid 300 - bridge vlan del dev $eth1 vid 300 + bridge vlan del dev $swp1 vid 200 + bridge vlan del dev $swp1 vid 300 + bridge vlan del dev $swp2 vid 300 ip link set br0 type bridge vlan_filtering 0 + + log_test "Ingress VLAN modification" } test_vlan_egress_modify() { - printf "Testing egress VLAN modification.. " + local h1_mac=$(mac_get $h1) + local h2_mac=$(mac_get $h2) - tc qdisc add dev $eth1 clsact + RET=0 + + tc qdisc add dev $swp2 clsact ip link set br0 type bridge vlan_filtering 1 - bridge vlan add dev $eth0 vid 200 - bridge vlan add dev $eth1 vid 200 + bridge vlan add dev $swp1 vid 200 + bridge vlan add dev $swp2 vid 200 - tc filter add dev $eth1 egress chain $(ES0) pref 3 \ + tc filter add dev $swp2 egress chain $(ES0) pref 3 \ protocol 802.1Q flower skip_sw vlan_id 200 vlan_prio 0 \ action vlan modify id 300 priority 7 - tcpdump_start $eth2 + tcpdump_start $h2 - $MZ $eth3.200 -q -c 1 -p 64 -a $eth3_mac -b $eth2_mac -t ip + $MZ $h1.200 -q -c 1 -p 64 -a $h1_mac -b $h2_mac -t ip sleep 1 - tcpdump_stop + tcpdump_stop $h2 - if tcpdump_show | grep -q "$eth3_mac > $eth2_mac, .* vlan 300"; then - echo "OK" - else - echo "FAIL" - fi + tcpdump_show $h2 | grep -q "$h1_mac > $h2_mac, .* vlan 300" + check_err "$?" "tagged reception" - tcpdump_cleanup + tcpdump_cleanup $h2 - tc filter del dev $eth1 egress chain $(ES0) pref 3 - tc qdisc del dev $eth1 clsact + tc filter del dev $swp2 egress chain $(ES0) pref 3 + tc qdisc del dev $swp2 clsact - bridge vlan del dev $eth0 vid 200 - bridge vlan del dev $eth1 vid 200 + bridge vlan del dev $swp1 vid 200 + bridge vlan del dev $swp2 vid 200 ip link set br0 type bridge vlan_filtering 0 + + log_test "Egress VLAN modification" } test_skbedit_priority() { + local h1_mac=$(mac_get $h1) + local h2_mac=$(mac_get $h2) local num_pkts=100 - printf "Testing frame prioritization.. " + before=$(ethtool_stats_get $swp1 'rx_green_prio_7') - before=$(ethtool_stats_get $eth0 'rx_green_prio_7') + $MZ $h1 -q -c $num_pkts -p 64 -a $h1_mac -b $h2_mac -t ip -A 10.1.1.2 - $MZ $eth3 -q -c $num_pkts -p 64 -a $eth3_mac -b $eth2_mac -t ip -A 10.1.1.2 - - after=$(ethtool_stats_get $eth0 'rx_green_prio_7') + after=$(ethtool_stats_get $swp1 'rx_green_prio_7') if [ $((after - before)) = $num_pkts ]; then - echo "OK" + RET=0 else - echo "FAIL" + RET=1 fi + + log_test "Frame prioritization" } trap cleanup EXIT |