diff options
Diffstat (limited to 'tools/testing/selftests/net/forwarding')
| -rw-r--r-- | tools/testing/selftests/net/forwarding/devlink_lib.sh | 55 | ||||
| -rwxr-xr-x | tools/testing/selftests/net/forwarding/ethtool.sh | 318 | ||||
| -rwxr-xr-x | tools/testing/selftests/net/forwarding/ethtool_lib.sh | 69 | ||||
| -rw-r--r-- | tools/testing/selftests/net/forwarding/lib.sh | 36 | ||||
| -rw-r--r-- | tools/testing/selftests/net/forwarding/tc_common.sh | 11 |
5 files changed, 485 insertions, 4 deletions
diff --git a/tools/testing/selftests/net/forwarding/devlink_lib.sh b/tools/testing/selftests/net/forwarding/devlink_lib.sh index 13d03a6d85ba..40b076983239 100644 --- a/tools/testing/selftests/net/forwarding/devlink_lib.sh +++ b/tools/testing/selftests/net/forwarding/devlink_lib.sh @@ -355,3 +355,58 @@ devlink_trap_group_stats_idle_test() return 1 fi } + +devlink_trap_exception_test() +{ + local trap_name=$1; shift + local group_name=$1; shift + + devlink_trap_stats_idle_test $trap_name + check_fail $? "Trap stats idle when packets should have been trapped" + + devlink_trap_group_stats_idle_test $group_name + check_fail $? "Trap group idle when packets should have been trapped" +} + +devlink_trap_drop_test() +{ + local trap_name=$1; shift + local group_name=$1; shift + local dev=$1; shift + + # This is the common part of all the tests. It checks that stats are + # initially idle, then non-idle after changing the trap action and + # finally idle again. It also makes sure the packets are dropped and + # never forwarded. + devlink_trap_stats_idle_test $trap_name + check_err $? "Trap stats not idle with initial drop action" + devlink_trap_group_stats_idle_test $group_name + check_err $? "Trap group stats not idle with initial drop action" + + + devlink_trap_action_set $trap_name "trap" + devlink_trap_stats_idle_test $trap_name + check_fail $? "Trap stats idle after setting action to trap" + devlink_trap_group_stats_idle_test $group_name + check_fail $? "Trap group stats idle after setting action to trap" + + devlink_trap_action_set $trap_name "drop" + + devlink_trap_stats_idle_test $trap_name + check_err $? "Trap stats not idle after setting action to drop" + devlink_trap_group_stats_idle_test $group_name + check_err $? "Trap group stats not idle after setting action to drop" + + tc_check_packets "dev $dev egress" 101 0 + check_err $? "Packets were not dropped" +} + +devlink_trap_drop_cleanup() +{ + local mz_pid=$1; shift + local dev=$1; shift + local proto=$1; shift + + kill $mz_pid && wait $mz_pid &> /dev/null + tc filter del dev $dev egress protocol $proto pref 1 handle 101 flower +} diff --git a/tools/testing/selftests/net/forwarding/ethtool.sh b/tools/testing/selftests/net/forwarding/ethtool.sh new file mode 100755 index 000000000000..eb8e2a23bbb4 --- /dev/null +++ b/tools/testing/selftests/net/forwarding/ethtool.sh @@ -0,0 +1,318 @@ +#!/bin/bash +# SPDX-License-Identifier: GPL-2.0 + +ALL_TESTS=" + same_speeds_autoneg_off + different_speeds_autoneg_off + combination_of_neg_on_and_off + advertise_subset_of_speeds + check_highest_speed_is_chosen + different_speeds_autoneg_on +" +NUM_NETIFS=2 +source lib.sh +source ethtool_lib.sh + +h1_create() +{ + simple_if_init $h1 192.0.2.1/24 +} + +h1_destroy() +{ + simple_if_fini $h1 192.0.2.1/24 +} + +h2_create() +{ + simple_if_init $h2 192.0.2.2/24 +} + +h2_destroy() +{ + simple_if_fini $h2 192.0.2.2/24 +} + +setup_prepare() +{ + h1=${NETIFS[p1]} + h2=${NETIFS[p2]} + + h1_create + h2_create +} + +cleanup() +{ + pre_cleanup + + h2_destroy + h1_destroy +} + +different_speeds_get() +{ + local dev1=$1; shift + local dev2=$1; shift + local with_mode=$1; shift + local adver=$1; shift + + local -a speeds_arr + + speeds_arr=($(common_speeds_get $dev1 $dev2 $with_mode $adver)) + if [[ ${#speeds_arr[@]} < 2 ]]; then + check_err 1 "cannot check different speeds. There are not enough speeds" + fi + + echo ${speeds_arr[0]} ${speeds_arr[1]} +} + +same_speeds_autoneg_off() +{ + # Check that when each of the reported speeds is forced, the links come + # up and are operational. + local -a speeds_arr=($(common_speeds_get $h1 $h2 0 0)) + + for speed in "${speeds_arr[@]}"; do + RET=0 + ethtool_set $h1 speed $speed autoneg off + ethtool_set $h2 speed $speed autoneg off + + setup_wait_dev_with_timeout $h1 + setup_wait_dev_with_timeout $h2 + ping_do $h1 192.0.2.2 + check_err $? "speed $speed autoneg off" + log_test "force of same speed autoneg off" + log_info "speed = $speed" + done + + ethtool -s $h2 autoneg on + ethtool -s $h1 autoneg on +} + +different_speeds_autoneg_off() +{ + # Test that when we force different speeds, links are not up and ping + # fails. + RET=0 + + local -a speeds_arr=($(different_speeds_get $h1 $h2 0 0)) + local speed1=${speeds_arr[0]} + local speed2=${speeds_arr[1]} + + ethtool_set $h1 speed $speed1 autoneg off + ethtool_set $h2 speed $speed2 autoneg off + + setup_wait_dev_with_timeout $h1 + setup_wait_dev_with_timeout $h2 + ping_do $h1 192.0.2.2 + check_fail $? "ping with different speeds" + + log_test "force of different speeds autoneg off" + + ethtool -s $h2 autoneg on + ethtool -s $h1 autoneg on +} + +combination_of_neg_on_and_off() +{ + # Test that when one device is forced to a speed supported by both + # endpoints and the other device is configured to autoneg on, the links + # are up and ping passes. + local -a speeds_arr=($(common_speeds_get $h1 $h2 0 1)) + + for speed in "${speeds_arr[@]}"; do + RET=0 + ethtool_set $h1 speed $speed autoneg off + + setup_wait_dev_with_timeout $h1 + setup_wait_dev_with_timeout $h2 + ping_do $h1 192.0.2.2 + check_err $? "h1-speed=$speed autoneg off, h2 autoneg on" + log_test "one side with autoneg off and another with autoneg on" + log_info "force speed = $speed" + done + + ethtool -s $h1 autoneg on +} + +hex_speed_value_get() +{ + local speed=$1; shift + + local shift_size=${speed_values[$speed]} + speed=$((0x1 << $"shift_size")) + printf "%#x" "$speed" +} + +subset_of_common_speeds_get() +{ + local dev1=$1; shift + local dev2=$1; shift + local adver=$1; shift + + local -a speeds_arr=($(common_speeds_get $dev1 $dev2 0 $adver)) + local speed_to_advertise=0 + local speed_to_remove=${speeds_arr[0]} + speed_to_remove+='base' + + local -a speeds_mode_arr=($(common_speeds_get $dev1 $dev2 1 $adver)) + + for speed in ${speeds_mode_arr[@]}; do + if [[ $speed != $speed_to_remove* ]]; then + speed=$(hex_speed_value_get $speed) + speed_to_advertise=$(($speed_to_advertise | \ + $speed)) + fi + + done + + # Convert to hex. + printf "%#x" "$speed_to_advertise" +} + +speed_to_advertise_get() +{ + # The function returns the hex number that is composed by OR-ing all + # the modes corresponding to the provided speed. + local speed_without_mode=$1; shift + local supported_speeds=("$@"); shift + local speed_to_advertise=0 + + speed_without_mode+='base' + + for speed in ${supported_speeds[@]}; do + if [[ $speed == $speed_without_mode* ]]; then + speed=$(hex_speed_value_get $speed) + speed_to_advertise=$(($speed_to_advertise | \ + $speed)) + fi + + done + + # Convert to hex. + printf "%#x" "$speed_to_advertise" +} + +advertise_subset_of_speeds() +{ + # Test that when one device advertises a subset of speeds and another + # advertises a specific speed (but all modes of this speed), the links + # are up and ping passes. + RET=0 + + local speed_1_to_advertise=$(subset_of_common_speeds_get $h1 $h2 1) + ethtool_set $h1 advertise $speed_1_to_advertise + + if [ $RET != 0 ]; then + log_test "advertise subset of speeds" + return + fi + + local -a speeds_arr_without_mode=($(common_speeds_get $h1 $h2 0 1)) + # Check only speeds that h1 advertised. Remove the first speed. + unset speeds_arr_without_mode[0] + local -a speeds_arr_with_mode=($(common_speeds_get $h1 $h2 1 1)) + + for speed_value in ${speeds_arr_without_mode[@]}; do + RET=0 + local speed_2_to_advertise=$(speed_to_advertise_get $speed_value \ + "${speeds_arr_with_mode[@]}") + ethtool_set $h2 advertise $speed_2_to_advertise + + setup_wait_dev_with_timeout $h1 + setup_wait_dev_with_timeout $h2 + ping_do $h1 192.0.2.2 + check_err $? "h1=$speed_1_to_advertise, h2=$speed_2_to_advertise ($speed_value)" + + log_test "advertise subset of speeds" + log_info "h1=$speed_1_to_advertise, h2=$speed_2_to_advertise" + done + + ethtool -s $h2 autoneg on + ethtool -s $h1 autoneg on +} + +check_highest_speed_is_chosen() +{ + # Test that when one device advertises a subset of speeds, the other + # chooses the highest speed. This test checks configuration without + # traffic. + RET=0 + + local max_speed + local chosen_speed + local speed_to_advertise=$(subset_of_common_speeds_get $h1 $h2 1) + + ethtool_set $h1 advertise $speed_to_advertise + + if [ $RET != 0 ]; then + log_test "check highest speed" + return + fi + + local -a speeds_arr=($(common_speeds_get $h1 $h2 0 1)) + # Remove the first speed, h1 does not advertise this speed. + unset speeds_arr[0] + + max_speed=${speeds_arr[0]} + for current in ${speeds_arr[@]}; do + if [[ $current -gt $max_speed ]]; then + max_speed=$current + fi + done + + setup_wait_dev_with_timeout $h1 + setup_wait_dev_with_timeout $h2 + chosen_speed=$(ethtool $h1 | grep 'Speed:') + chosen_speed=${chosen_speed%"Mb/s"*} + chosen_speed=${chosen_speed#*"Speed: "} + ((chosen_speed == max_speed)) + check_err $? "h1 advertise $speed_to_advertise, h2 sync to speed $chosen_speed" + + log_test "check highest speed" + + ethtool -s $h2 autoneg on + ethtool -s $h1 autoneg on +} + +different_speeds_autoneg_on() +{ + # Test that when we configure links to advertise different speeds, + # links are not up and ping fails. + RET=0 + + local -a speeds=($(different_speeds_get $h1 $h2 1 1)) + local speed1=${speeds[0]} + local speed2=${speeds[1]} + + speed1=$(hex_speed_value_get $speed1) + speed2=$(hex_speed_value_get $speed2) + + ethtool_set $h1 advertise $speed1 + ethtool_set $h2 advertise $speed2 + + if (($RET)); then + setup_wait_dev_with_timeout $h1 + setup_wait_dev_with_timeout $h2 + ping_do $h1 192.0.2.2 + check_fail $? "ping with different speeds autoneg on" + fi + + log_test "advertise different speeds autoneg on" + + ethtool -s $h2 autoneg on + ethtool -s $h1 autoneg on +} + +trap cleanup EXIT + +setup_prepare +setup_wait + +declare -gA speed_values +eval "speed_values=($(speeds_arr_get))" + +tests_run + +exit $EXIT_STATUS diff --git a/tools/testing/selftests/net/forwarding/ethtool_lib.sh b/tools/testing/selftests/net/forwarding/ethtool_lib.sh new file mode 100755 index 000000000000..925d229a59d8 --- /dev/null +++ b/tools/testing/selftests/net/forwarding/ethtool_lib.sh @@ -0,0 +1,69 @@ +#!/bin/bash +# SPDX-License-Identifier: GPL-2.0 + +speeds_arr_get() +{ + cmd='/ETHTOOL_LINK_MODE_[^[:space:]]*_BIT[[:space:]]+=[[:space:]]+/ \ + {sub(/,$/, "") \ + sub(/ETHTOOL_LINK_MODE_/,"") \ + sub(/_BIT/,"") \ + sub(/_Full/,"/Full") \ + sub(/_Half/,"/Half");\ + print "["$1"]="$3}' + + awk "${cmd}" /usr/include/linux/ethtool.h +} + +ethtool_set() +{ + local cmd="$@" + local out=$(ethtool -s $cmd 2>&1 | wc -l) + + check_err $out "error in configuration. $cmd" +} + +dev_speeds_get() +{ + local dev=$1; shift + local with_mode=$1; shift + local adver=$1; shift + local speeds_str + + if (($adver)); then + mode="Advertised link modes" + else + mode="Supported link modes" + fi + + speeds_str=$(ethtool "$dev" | \ + # Snip everything before the link modes section. + sed -n '/'"$mode"':/,$p' | \ + # Quit processing the rest at the start of the next section. + # When checking, skip the header of this section (hence the 2,). + sed -n '2,${/^[\t][^ \t]/q};p' | \ + # Drop the section header of the current section. + cut -d':' -f2) + + local -a speeds_arr=($speeds_str) + if [[ $with_mode -eq 0 ]]; then + for ((i=0; i<${#speeds_arr[@]}; i++)); do + speeds_arr[$i]=${speeds_arr[$i]%base*} + done + fi + echo ${speeds_arr[@]} +} + +common_speeds_get() +{ + dev1=$1; shift + dev2=$1; shift + with_mode=$1; shift + adver=$1; shift + + local -a dev1_speeds=($(dev_speeds_get $dev1 $with_mode $adver)) + local -a dev2_speeds=($(dev_speeds_get $dev2 $with_mode $adver)) + + comm -12 \ + <(printf '%s\n' "${dev1_speeds[@]}" | sort -u) \ + <(printf '%s\n' "${dev2_speeds[@]}" | sort -u) +} diff --git a/tools/testing/selftests/net/forwarding/lib.sh b/tools/testing/selftests/net/forwarding/lib.sh index 85c587a03c8a..1f64e7348f69 100644 --- a/tools/testing/selftests/net/forwarding/lib.sh +++ b/tools/testing/selftests/net/forwarding/lib.sh @@ -18,6 +18,8 @@ NETIF_CREATE=${NETIF_CREATE:=yes} MCD=${MCD:=smcrouted} MC_CLI=${MC_CLI:=smcroutectl} PING_TIMEOUT=${PING_TIMEOUT:=5} +WAIT_TIMEOUT=${WAIT_TIMEOUT:=20} +INTERFACE_TIMEOUT=${INTERFACE_TIMEOUT:=600} relative_path="${BASH_SOURCE%/*}" if [[ "$relative_path" == "${BASH_SOURCE}" ]]; then @@ -226,24 +228,45 @@ log_info() setup_wait_dev() { local dev=$1; shift + local wait_time=${1:-$WAIT_TIME}; shift - while true; do + setup_wait_dev_with_timeout "$dev" $INTERFACE_TIMEOUT $wait_time + + if (($?)); then + check_err 1 + log_test setup_wait_dev ": Interface $dev does not come up." + exit 1 + fi +} + +setup_wait_dev_with_timeout() +{ + local dev=$1; shift + local max_iterations=${1:-$WAIT_TIMEOUT}; shift + local wait_time=${1:-$WAIT_TIME}; shift + local i + + for ((i = 1; i <= $max_iterations; ++i)); do ip link show dev $dev up \ | grep 'state UP' &> /dev/null if [[ $? -ne 0 ]]; then sleep 1 else - break + sleep $wait_time + return 0 fi done + + return 1 } setup_wait() { local num_netifs=${1:-$NUM_NETIFS} + local i for ((i = 1; i <= num_netifs; ++i)); do - setup_wait_dev ${NETIFS[p$i]} + setup_wait_dev ${NETIFS[p$i]} 0 done # Make sure links are ready. @@ -254,6 +277,7 @@ cmd_jq() { local cmd=$1 local jq_exp=$2 + local jq_opts=$3 local ret local output @@ -263,7 +287,11 @@ cmd_jq() if [[ $ret -ne 0 ]]; then return $ret fi - output=$(echo $output | jq -r "$jq_exp") + output=$(echo $output | jq -r $jq_opts "$jq_exp") + ret=$? + if [[ $ret -ne 0 ]]; then + return $ret + fi echo $output # return success only in case of non-empty output [ ! -z "$output" ] diff --git a/tools/testing/selftests/net/forwarding/tc_common.sh b/tools/testing/selftests/net/forwarding/tc_common.sh index 315e934358d4..d93589bd4d1d 100644 --- a/tools/testing/selftests/net/forwarding/tc_common.sh +++ b/tools/testing/selftests/net/forwarding/tc_common.sh @@ -14,3 +14,14 @@ tc_check_packets() select(.options.actions[0].stats.packets == $count)" \ &> /dev/null } + +tc_check_packets_hitting() +{ + local id=$1 + local handle=$2 + + cmd_jq "tc -j -s filter show $id" \ + ".[] | select(.options.handle == $handle) | \ + select(.options.actions[0].stats.packets > 0)" \ + &> /dev/null +} |