diff options
Diffstat (limited to 'tools/testing/selftests')
53 files changed, 1055 insertions, 448 deletions
diff --git a/tools/testing/selftests/bpf/prog_tests/flow_dissector.c b/tools/testing/selftests/bpf/prog_tests/flow_dissector.c index bcbd928c96ab..fc818bc1d729 100644 --- a/tools/testing/selftests/bpf/prog_tests/flow_dissector.c +++ b/tools/testing/selftests/bpf/prog_tests/flow_dissector.c @@ -39,6 +39,58 @@ static struct bpf_flow_keys pkt_v6_flow_keys = { .n_proto = __bpf_constant_htons(ETH_P_IPV6), }; +#define VLAN_HLEN 4 + +static struct { + struct ethhdr eth; + __u16 vlan_tci; + __u16 vlan_proto; + struct iphdr iph; + struct tcphdr tcp; +} __packed pkt_vlan_v4 = { + .eth.h_proto = __bpf_constant_htons(ETH_P_8021Q), + .vlan_proto = __bpf_constant_htons(ETH_P_IP), + .iph.ihl = 5, + .iph.protocol = IPPROTO_TCP, + .iph.tot_len = __bpf_constant_htons(MAGIC_BYTES), + .tcp.urg_ptr = 123, + .tcp.doff = 5, +}; + +static struct bpf_flow_keys pkt_vlan_v4_flow_keys = { + .nhoff = VLAN_HLEN, + .thoff = VLAN_HLEN + sizeof(struct iphdr), + .addr_proto = ETH_P_IP, + .ip_proto = IPPROTO_TCP, + .n_proto = __bpf_constant_htons(ETH_P_IP), +}; + +static struct { + struct ethhdr eth; + __u16 vlan_tci; + __u16 vlan_proto; + __u16 vlan_tci2; + __u16 vlan_proto2; + struct ipv6hdr iph; + struct tcphdr tcp; +} __packed pkt_vlan_v6 = { + .eth.h_proto = __bpf_constant_htons(ETH_P_8021AD), + .vlan_proto = __bpf_constant_htons(ETH_P_8021Q), + .vlan_proto2 = __bpf_constant_htons(ETH_P_IPV6), + .iph.nexthdr = IPPROTO_TCP, + .iph.payload_len = __bpf_constant_htons(MAGIC_BYTES), + .tcp.urg_ptr = 123, + .tcp.doff = 5, +}; + +static struct bpf_flow_keys pkt_vlan_v6_flow_keys = { + .nhoff = VLAN_HLEN * 2, + .thoff = VLAN_HLEN * 2 + sizeof(struct ipv6hdr), + .addr_proto = ETH_P_IPV6, + .ip_proto = IPPROTO_TCP, + .n_proto = __bpf_constant_htons(ETH_P_IPV6), +}; + void test_flow_dissector(void) { struct bpf_flow_keys flow_keys; @@ -68,5 +120,21 @@ void test_flow_dissector(void) err, errno, retval, duration, size, sizeof(flow_keys)); CHECK_FLOW_KEYS("ipv6_flow_keys", flow_keys, pkt_v6_flow_keys); + err = bpf_prog_test_run(prog_fd, 10, &pkt_vlan_v4, sizeof(pkt_vlan_v4), + &flow_keys, &size, &retval, &duration); + CHECK(size != sizeof(flow_keys) || err || retval != 1, "vlan_ipv4", + "err %d errno %d retval %d duration %d size %u/%lu\n", + err, errno, retval, duration, size, sizeof(flow_keys)); + CHECK_FLOW_KEYS("vlan_ipv4_flow_keys", flow_keys, + pkt_vlan_v4_flow_keys); + + err = bpf_prog_test_run(prog_fd, 10, &pkt_vlan_v6, sizeof(pkt_vlan_v6), + &flow_keys, &size, &retval, &duration); + CHECK(size != sizeof(flow_keys) || err || retval != 1, "vlan_ipv6", + "err %d errno %d retval %d duration %d size %u/%lu\n", + err, errno, retval, duration, size, sizeof(flow_keys)); + CHECK_FLOW_KEYS("vlan_ipv6_flow_keys", flow_keys, + pkt_vlan_v6_flow_keys); + bpf_object__close(obj); } diff --git a/tools/testing/selftests/bpf/progs/bpf_flow.c b/tools/testing/selftests/bpf/progs/bpf_flow.c index 284660f5aa95..75b17cada539 100644 --- a/tools/testing/selftests/bpf/progs/bpf_flow.c +++ b/tools/testing/selftests/bpf/progs/bpf_flow.c @@ -92,7 +92,6 @@ static __always_inline int parse_eth_proto(struct __sk_buff *skb, __be16 proto) { struct bpf_flow_keys *keys = skb->flow_keys; - keys->n_proto = proto; switch (proto) { case bpf_htons(ETH_P_IP): bpf_tail_call(skb, &jmp_table, IP); @@ -119,10 +118,9 @@ static __always_inline int parse_eth_proto(struct __sk_buff *skb, __be16 proto) SEC("flow_dissector") int _dissect(struct __sk_buff *skb) { - if (!skb->vlan_present) - return parse_eth_proto(skb, skb->protocol); - else - return parse_eth_proto(skb, skb->vlan_proto); + struct bpf_flow_keys *keys = skb->flow_keys; + + return parse_eth_proto(skb, keys->n_proto); } /* Parses on IPPROTO_* */ @@ -336,15 +334,9 @@ PROG(VLAN)(struct __sk_buff *skb) { struct bpf_flow_keys *keys = skb->flow_keys; struct vlan_hdr *vlan, _vlan; - __be16 proto; - - /* Peek back to see if single or double-tagging */ - if (bpf_skb_load_bytes(skb, keys->thoff - sizeof(proto), &proto, - sizeof(proto))) - return BPF_DROP; /* Account for double-tagging */ - if (proto == bpf_htons(ETH_P_8021AD)) { + if (keys->n_proto == bpf_htons(ETH_P_8021AD)) { vlan = bpf_flow_dissect_get_header(skb, sizeof(*vlan), &_vlan); if (!vlan) return BPF_DROP; @@ -352,6 +344,7 @@ PROG(VLAN)(struct __sk_buff *skb) if (vlan->h_vlan_encapsulated_proto != bpf_htons(ETH_P_8021Q)) return BPF_DROP; + keys->nhoff += sizeof(*vlan); keys->thoff += sizeof(*vlan); } @@ -359,12 +352,14 @@ PROG(VLAN)(struct __sk_buff *skb) if (!vlan) return BPF_DROP; + keys->nhoff += sizeof(*vlan); keys->thoff += sizeof(*vlan); /* Only allow 8021AD + 8021Q double tagging and no triple tagging.*/ if (vlan->h_vlan_encapsulated_proto == bpf_htons(ETH_P_8021AD) || vlan->h_vlan_encapsulated_proto == bpf_htons(ETH_P_8021Q)) return BPF_DROP; + keys->n_proto = vlan->h_vlan_encapsulated_proto; return parse_eth_proto(skb, vlan->h_vlan_encapsulated_proto); } diff --git a/tools/testing/selftests/bpf/test_btf.c b/tools/testing/selftests/bpf/test_btf.c index 23e3b314ca60..ec5794e4205b 100644 --- a/tools/testing/selftests/bpf/test_btf.c +++ b/tools/testing/selftests/bpf/test_btf.c @@ -5777,6 +5777,53 @@ const struct btf_dedup_test dedup_tests[] = { }, }, { + .descr = "dedup: void equiv check", + /* + * // CU 1: + * struct s { + * struct {} *x; + * }; + * // CU 2: + * struct s { + * int *x; + * }; + */ + .input = { + .raw_types = { + /* CU 1 */ + BTF_STRUCT_ENC(0, 0, 1), /* [1] struct {} */ + BTF_PTR_ENC(1), /* [2] ptr -> [1] */ + BTF_STRUCT_ENC(NAME_NTH(1), 1, 8), /* [3] struct s */ + BTF_MEMBER_ENC(NAME_NTH(2), 2, 0), + /* CU 2 */ + BTF_PTR_ENC(0), /* [4] ptr -> void */ + BTF_STRUCT_ENC(NAME_NTH(1), 1, 8), /* [5] struct s */ + BTF_MEMBER_ENC(NAME_NTH(2), 4, 0), + BTF_END_RAW, + }, + BTF_STR_SEC("\0s\0x"), + }, + .expect = { + .raw_types = { + /* CU 1 */ + BTF_STRUCT_ENC(0, 0, 1), /* [1] struct {} */ + BTF_PTR_ENC(1), /* [2] ptr -> [1] */ + BTF_STRUCT_ENC(NAME_NTH(1), 1, 8), /* [3] struct s */ + BTF_MEMBER_ENC(NAME_NTH(2), 2, 0), + /* CU 2 */ + BTF_PTR_ENC(0), /* [4] ptr -> void */ + BTF_STRUCT_ENC(NAME_NTH(1), 1, 8), /* [5] struct s */ + BTF_MEMBER_ENC(NAME_NTH(2), 4, 0), + BTF_END_RAW, + }, + BTF_STR_SEC("\0s\0x"), + }, + .opts = { + .dont_resolve_fwds = false, + .dedup_table_size = 1, /* force hash collisions */ + }, +}, +{ .descr = "dedup: all possible kinds (no duplicates)", .input = { .raw_types = { diff --git a/tools/testing/selftests/bpf/verifier/calls.c b/tools/testing/selftests/bpf/verifier/calls.c index f2ccae39ee66..9093a8f64dc6 100644 --- a/tools/testing/selftests/bpf/verifier/calls.c +++ b/tools/testing/selftests/bpf/verifier/calls.c @@ -375,6 +375,31 @@ .flags = F_NEEDS_EFFICIENT_UNALIGNED_ACCESS, }, { + "calls: ptr null check in subprog", + .insns = { + BPF_ST_MEM(BPF_DW, BPF_REG_10, -8, 0), + BPF_MOV64_REG(BPF_REG_2, BPF_REG_10), + BPF_ALU64_IMM(BPF_ADD, BPF_REG_2, -8), + BPF_LD_MAP_FD(BPF_REG_1, 0), + BPF_EMIT_CALL(BPF_FUNC_map_lookup_elem), + BPF_MOV64_REG(BPF_REG_1, BPF_REG_0), + BPF_MOV64_REG(BPF_REG_6, BPF_REG_0), + BPF_RAW_INSN(BPF_JMP | BPF_CALL, 0, 1, 0, 3), + BPF_JMP_IMM(BPF_JEQ, BPF_REG_0, 0, 1), + BPF_LDX_MEM(BPF_B, BPF_REG_0, BPF_REG_6, 0), + BPF_EXIT_INSN(), + BPF_MOV64_IMM(BPF_REG_0, 0), + BPF_JMP_IMM(BPF_JEQ, BPF_REG_1, 0, 1), + BPF_MOV64_IMM(BPF_REG_0, 1), + BPF_EXIT_INSN(), + }, + .errstr_unpriv = "function calls to other bpf functions are allowed for root only", + .fixup_map_hash_48b = { 3 }, + .result_unpriv = REJECT, + .result = ACCEPT, + .retval = 0, +}, +{ "calls: two calls with args", .insns = { BPF_RAW_INSN(BPF_JMP | BPF_CALL, 0, 1, 0, 1), @@ -908,6 +933,44 @@ .result = REJECT, }, { + "calls: stack depth check in dead code", + .insns = { + /* main */ + BPF_MOV64_IMM(BPF_REG_1, 0), + BPF_RAW_INSN(BPF_JMP|BPF_CALL, 0, 1, 0, 1), /* call A */ + BPF_EXIT_INSN(), + /* A */ + BPF_JMP_IMM(BPF_JEQ, BPF_REG_1, 0, 1), + BPF_RAW_INSN(BPF_JMP|BPF_CALL, 0, 1, 0, 2), /* call B */ + BPF_MOV64_IMM(BPF_REG_0, 0), + BPF_EXIT_INSN(), + /* B */ + BPF_RAW_INSN(BPF_JMP|BPF_CALL, 0, 1, 0, 1), /* call C */ + BPF_EXIT_INSN(), + /* C */ + BPF_RAW_INSN(BPF_JMP|BPF_CALL, 0, 1, 0, 1), /* call D */ + BPF_EXIT_INSN(), + /* D */ + BPF_RAW_INSN(BPF_JMP|BPF_CALL, 0, 1, 0, 1), /* call E */ + BPF_EXIT_INSN(), + /* E */ + BPF_RAW_INSN(BPF_JMP|BPF_CALL, 0, 1, 0, 1), /* call F */ + BPF_EXIT_INSN(), + /* F */ + BPF_RAW_INSN(BPF_JMP|BPF_CALL, 0, 1, 0, 1), /* call G */ + BPF_EXIT_INSN(), + /* G */ + BPF_RAW_INSN(BPF_JMP|BPF_CALL, 0, 1, 0, 1), /* call H */ + BPF_EXIT_INSN(), + /* H */ + BPF_MOV64_IMM(BPF_REG_0, 0), + BPF_EXIT_INSN(), + }, + .prog_type = BPF_PROG_TYPE_XDP, + .errstr = "call stack", + .result = REJECT, +}, +{ "calls: spill into caller stack frame", .insns = { BPF_ST_MEM(BPF_DW, BPF_REG_10, -8, 0), diff --git a/tools/testing/selftests/bpf/verifier/direct_packet_access.c b/tools/testing/selftests/bpf/verifier/direct_packet_access.c index e3fc22e672c2..d5c596fdc4b9 100644 --- a/tools/testing/selftests/bpf/verifier/direct_packet_access.c +++ b/tools/testing/selftests/bpf/verifier/direct_packet_access.c @@ -631,3 +631,25 @@ .errstr = "invalid access to packet", .prog_type = BPF_PROG_TYPE_SCHED_CLS, }, +{ + "direct packet access: test29 (reg > pkt_end in subprog)", + .insns = { + BPF_LDX_MEM(BPF_W, BPF_REG_6, BPF_REG_1, + offsetof(struct __sk_buff, data)), + BPF_LDX_MEM(BPF_W, BPF_REG_2, BPF_REG_1, + offsetof(struct __sk_buff, data_end)), + BPF_MOV64_REG(BPF_REG_3, BPF_REG_6), + BPF_ALU64_IMM(BPF_ADD, BPF_REG_3, 8), + BPF_RAW_INSN(BPF_JMP | BPF_CALL, 0, 1, 0, 4), + BPF_JMP_IMM(BPF_JEQ, BPF_REG_0, 0, 1), + BPF_LDX_MEM(BPF_B, BPF_REG_0, BPF_REG_6, 0), + BPF_MOV64_IMM(BPF_REG_0, 0), + BPF_EXIT_INSN(), + BPF_MOV64_IMM(BPF_REG_0, 0), + BPF_JMP_REG(BPF_JGT, BPF_REG_3, BPF_REG_2, 1), + BPF_MOV64_IMM(BPF_REG_0, 1), + BPF_EXIT_INSN(), + }, + .result = ACCEPT, + .prog_type = BPF_PROG_TYPE_SCHED_CLS, +}, diff --git a/tools/testing/selftests/drivers/net/mlxsw/rtnetlink.sh b/tools/testing/selftests/drivers/net/mlxsw/rtnetlink.sh index c4cf6e6d800e..a6c196c8534c 100755 --- a/tools/testing/selftests/drivers/net/mlxsw/rtnetlink.sh +++ b/tools/testing/selftests/drivers/net/mlxsw/rtnetlink.sh @@ -11,6 +11,7 @@ lib_dir=$(dirname $0)/../../../net/forwarding ALL_TESTS=" rif_set_addr_test + rif_vrf_set_addr_test rif_inherit_bridge_addr_test rif_non_inherit_bridge_addr_test vlan_interface_deletion_test @@ -98,6 +99,25 @@ rif_set_addr_test() ip link set dev $swp1 addr $swp1_mac } +rif_vrf_set_addr_test() +{ + # Test that it is possible to set an IP address on a VRF upper despite + # its random MAC address. + RET=0 + + ip link add name vrf-test type vrf table 10 + ip link set dev $swp1 master vrf-test + + ip -4 address add 192.0.2.1/24 dev vrf-test + check_err $? "failed to set IPv4 address on VRF" + ip -6 address add 2001:db8:1::1/64 dev vrf-test + check_err $? "failed to set IPv6 address on VRF" + + log_test "RIF - setting IP address on VRF" + + ip link del dev vrf-test +} + rif_inherit_bridge_addr_test() { RET=0 diff --git a/tools/testing/selftests/kvm/Makefile b/tools/testing/selftests/kvm/Makefile index 3c1f4bdf9000..f8588cca2bef 100644 --- a/tools/testing/selftests/kvm/Makefile +++ b/tools/testing/selftests/kvm/Makefile @@ -1,3 +1,5 @@ +include ../../../../scripts/Kbuild.include + all: top_srcdir = ../../../.. @@ -17,6 +19,7 @@ TEST_GEN_PROGS_x86_64 += x86_64/state_test TEST_GEN_PROGS_x86_64 += x86_64/evmcs_test TEST_GEN_PROGS_x86_64 += x86_64/hyperv_cpuid TEST_GEN_PROGS_x86_64 += x86_64/vmx_close_while_nested_test +TEST_GEN_PROGS_x86_64 += x86_64/smm_test TEST_GEN_PROGS_x86_64 += dirty_log_test TEST_GEN_PROGS_x86_64 += clear_dirty_log_test @@ -29,8 +32,12 @@ LIBKVM += $(LIBKVM_$(UNAME_M)) INSTALL_HDR_PATH = $(top_srcdir)/usr LINUX_HDR_PATH = $(INSTALL_HDR_PATH)/include/ LINUX_TOOL_INCLUDE = $(top_srcdir)/tools/include -CFLAGS += -O2 -g -std=gnu99 -I$(LINUX_TOOL_INCLUDE) -I$(LINUX_HDR_PATH) -Iinclude -I$(<D) -Iinclude/$(UNAME_M) -I.. -LDFLAGS += -pthread +CFLAGS += -O2 -g -std=gnu99 -fno-stack-protector -fno-PIE -I$(LINUX_TOOL_INCLUDE) -I$(LINUX_HDR_PATH) -Iinclude -I$(<D) -Iinclude/$(UNAME_M) -I.. + +no-pie-option := $(call try-run, echo 'int main() { return 0; }' | \ + $(CC) -Werror $(KBUILD_CPPFLAGS) $(CC_OPTION_CFLAGS) -no-pie -x c - -o "$$TMP", -no-pie) + +LDFLAGS += -pthread $(no-pie-option) # After inclusion, $(OUTPUT) is defined and # $(TEST_GEN_PROGS) starts with $(OUTPUT)/ diff --git a/tools/testing/selftests/kvm/dirty_log_test.c b/tools/testing/selftests/kvm/dirty_log_test.c index 4715cfba20dc..93f99c6b7d79 100644 --- a/tools/testing/selftests/kvm/dirty_log_test.c +++ b/tools/testing/selftests/kvm/dirty_log_test.c @@ -288,8 +288,11 @@ static void run_test(enum vm_guest_mode mode, unsigned long iterations, #endif max_gfn = (1ul << (guest_pa_bits - guest_page_shift)) - 1; guest_page_size = (1ul << guest_page_shift); - /* 1G of guest page sized pages */ - guest_num_pages = (1ul << (30 - guest_page_shift)); + /* + * A little more than 1G of guest page sized pages. Cover the + * case where the size is not aligned to 64 pages. + */ + guest_num_pages = (1ul << (30 - guest_page_shift)) + 3; host_page_size = getpagesize(); host_num_pages = (guest_num_pages * guest_page_size) / host_page_size + !!((guest_num_pages * guest_page_size) % host_page_size); @@ -359,7 +362,7 @@ static void run_test(enum vm_guest_mode mode, unsigned long iterations, kvm_vm_get_dirty_log(vm, TEST_MEM_SLOT_INDEX, bmap); #ifdef USE_CLEAR_DIRTY_LOG kvm_vm_clear_dirty_log(vm, TEST_MEM_SLOT_INDEX, bmap, 0, - DIV_ROUND_UP(host_num_pages, 64) * 64); + host_num_pages); #endif vm_dirty_log_verify(bmap); iteration++; diff --git a/tools/testing/selftests/kvm/include/kvm_util.h b/tools/testing/selftests/kvm/include/kvm_util.h index a84785b02557..07b71ad9734a 100644 --- a/tools/testing/selftests/kvm/include/kvm_util.h +++ b/tools/testing/selftests/kvm/include/kvm_util.h @@ -102,6 +102,7 @@ vm_paddr_t addr_gva2gpa(struct kvm_vm *vm, vm_vaddr_t gva); struct kvm_run *vcpu_state(struct kvm_vm *vm, uint32_t vcpuid); void vcpu_run(struct kvm_vm *vm, uint32_t vcpuid); int _vcpu_run(struct kvm_vm *vm, uint32_t vcpuid); +void vcpu_run_complete_io(struct kvm_vm *vm, uint32_t vcpuid); void vcpu_set_mp_state(struct kvm_vm *vm, uint32_t vcpuid, struct kvm_mp_state *mp_state); void vcpu_regs_get(struct kvm_vm *vm, uint32_t vcpuid, struct kvm_regs *regs); diff --git a/tools/testing/selftests/kvm/include/x86_64/processor.h b/tools/testing/selftests/kvm/include/x86_64/processor.h index e2884c2b81ff..6063d5b2f356 100644 --- a/tools/testing/selftests/kvm/include/x86_64/processor.h +++ b/tools/testing/selftests/kvm/include/x86_64/processor.h @@ -778,6 +778,33 @@ void vcpu_set_msr(struct kvm_vm *vm, uint32_t vcpuid, uint64_t msr_index, #define MSR_IA32_APICBASE_ENABLE (1<<11) #define MSR_IA32_APICBASE_BASE (0xfffff<<12) +#define APIC_BASE_MSR 0x800 +#define X2APIC_ENABLE (1UL << 10) +#define APIC_ICR 0x300 +#define APIC_DEST_SELF 0x40000 +#define APIC_DEST_ALLINC 0x80000 +#define APIC_DEST_ALLBUT 0xC0000 +#define APIC_ICR_RR_MASK 0x30000 +#define APIC_ICR_RR_INVALID 0x00000 +#define APIC_ICR_RR_INPROG 0x10000 +#define APIC_ICR_RR_VALID 0x20000 +#define APIC_INT_LEVELTRIG 0x08000 +#define APIC_INT_ASSERT 0x04000 +#define APIC_ICR_BUSY 0x01000 +#define APIC_DEST_LOGICAL 0x00800 +#define APIC_DEST_PHYSICAL 0x00000 +#define APIC_DM_FIXED 0x00000 +#define APIC_DM_FIXED_MASK 0x00700 +#define APIC_DM_LOWEST 0x00100 +#define APIC_DM_SMI 0x00200 +#define APIC_DM_REMRD 0x00300 +#define APIC_DM_NMI 0x00400 +#define APIC_DM_INIT 0x00500 +#define APIC_DM_STARTUP 0x00600 +#define APIC_DM_EXTINT 0x00700 +#define APIC_VECTOR_MASK 0x000FF +#define APIC_ICR2 0x310 + #define MSR_IA32_TSCDEADLINE 0x000006e0 #define MSR_IA32_UCODE_WRITE 0x00000079 diff --git a/tools/testing/selftests/kvm/lib/kvm_util.c b/tools/testing/selftests/kvm/lib/kvm_util.c index b52cfdefecbf..4ca96b228e46 100644 --- a/tools/testing/selftests/kvm/lib/kvm_util.c +++ b/tools/testing/selftests/kvm/lib/kvm_util.c @@ -91,6 +91,11 @@ static void vm_open(struct kvm_vm *vm, int perm, unsigned long type) if (vm->kvm_fd < 0) exit(KSFT_SKIP); + if (!kvm_check_cap(KVM_CAP_IMMEDIATE_EXIT)) { + fprintf(stderr, "immediate_exit not available, skipping test\n"); + exit(KSFT_SKIP); + } + vm->fd = ioctl(vm->kvm_fd, KVM_CREATE_VM, type); TEST_ASSERT(vm->fd >= 0, "KVM_CREATE_VM ioctl failed, " "rc: %i errno: %i", vm->fd, errno); @@ -1121,6 +1126,22 @@ int _vcpu_run(struct kvm_vm *vm, uint32_t vcpuid) return rc; } +void vcpu_run_complete_io(struct kvm_vm *vm, uint32_t vcpuid) +{ + struct vcpu *vcpu = vcpu_find(vm, vcpuid); + int ret; + + TEST_ASSERT(vcpu != NULL, "vcpu not found, vcpuid: %u", vcpuid); + + vcpu->state->immediate_exit = 1; + ret = ioctl(vcpu->fd, KVM_RUN, NULL); + vcpu->state->immediate_exit = 0; + + TEST_ASSERT(ret == -1 && errno == EINTR, + "KVM_RUN IOCTL didn't exit immediately, rc: %i, errno: %i", + ret, errno); +} + /* * VM VCPU Set MP State * diff --git a/tools/testing/selftests/kvm/lib/x86_64/processor.c b/tools/testing/selftests/kvm/lib/x86_64/processor.c index f28127f4a3af..dc7fae9fa424 100644 --- a/tools/testing/selftests/kvm/lib/x86_64/processor.c +++ b/tools/testing/selftests/kvm/lib/x86_64/processor.c @@ -1030,6 +1030,14 @@ struct kvm_x86_state *vcpu_save_state(struct kvm_vm *vm, uint32_t vcpuid) nested_size, sizeof(state->nested_)); } + /* + * When KVM exits to userspace with KVM_EXIT_IO, KVM guarantees + * guest state is consistent only after userspace re-enters the + * kernel with KVM_RUN. Complete IO prior to migrating state + * to a new VM. + */ + vcpu_run_complete_io(vm, vcpuid); + nmsrs = kvm_get_num_msrs(vm); list = malloc(sizeof(*list) + nmsrs * sizeof(list->indices[0])); list->nmsrs = nmsrs; @@ -1093,12 +1101,6 @@ void vcpu_load_state(struct kvm_vm *vm, uint32_t vcpuid, struct kvm_x86_state *s struct vcpu *vcpu = vcpu_find(vm, vcpuid); int r; - if (state->nested.size) { - r = ioctl(vcpu->fd, KVM_SET_NESTED_STATE, &state->nested); - TEST_ASSERT(r == 0, "Unexpected result from KVM_SET_NESTED_STATE, r: %i", - r); - } - r = ioctl(vcpu->fd, KVM_SET_XSAVE, &state->xsave); TEST_ASSERT(r == 0, "Unexpected result from KVM_SET_XSAVE, r: %i", r); @@ -1130,4 +1132,10 @@ void vcpu_load_state(struct kvm_vm *vm, uint32_t vcpuid, struct kvm_x86_state *s r = ioctl(vcpu->fd, KVM_SET_REGS, &state->regs); TEST_ASSERT(r == 0, "Unexpected result from KVM_SET_REGS, r: %i", r); + + if (state->nested.size) { + r = ioctl(vcpu->fd, KVM_SET_NESTED_STATE, &state->nested); + TEST_ASSERT(r == 0, "Unexpected result from KVM_SET_NESTED_STATE, r: %i", + r); + } } diff --git a/tools/testing/selftests/kvm/x86_64/cr4_cpuid_sync_test.c b/tools/testing/selftests/kvm/x86_64/cr4_cpuid_sync_test.c index d503a51fad30..7c2c4d4055a8 100644 --- a/tools/testing/selftests/kvm/x86_64/cr4_cpuid_sync_test.c +++ b/tools/testing/selftests/kvm/x86_64/cr4_cpuid_sync_test.c @@ -87,22 +87,25 @@ int main(int argc, char *argv[]) while (1) { rc = _vcpu_run(vm, VCPU_ID); - if (run->exit_reason == KVM_EXIT_IO) { - switch (get_ucall(vm, VCPU_ID, &uc)) { - case UCALL_SYNC: - /* emulate hypervisor clearing CR4.OSXSAVE */ - vcpu_sregs_get(vm, VCPU_ID, &sregs); - sregs.cr4 &= ~X86_CR4_OSXSAVE; - vcpu_sregs_set(vm, VCPU_ID, &sregs); - break; - case UCALL_ABORT: - TEST_ASSERT(false, "Guest CR4 bit (OSXSAVE) unsynchronized with CPUID bit."); - break; - case UCALL_DONE: - goto done; - default: - TEST_ASSERT(false, "Unknown ucall 0x%x.", uc.cmd); - } + TEST_ASSERT(run->exit_reason == KVM_EXIT_IO, + "Unexpected exit reason: %u (%s),\n", + run->exit_reason, + exit_reason_str(run->exit_reason)); + + switch (get_ucall(vm, VCPU_ID, &uc)) { + case UCALL_SYNC: + /* emulate hypervisor clearing CR4.OSXSAVE */ + vcpu_sregs_get(vm, VCPU_ID, &sregs); + sregs.cr4 &= ~X86_CR4_OSXSAVE; + vcpu_sregs_set(vm, VCPU_ID, &sregs); + break; + case UCALL_ABORT: + TEST_ASSERT(false, "Guest CR4 bit (OSXSAVE) unsynchronized with CPUID bit."); + break; + case UCALL_DONE: + goto done; + default: + TEST_ASSERT(false, "Unknown ucall 0x%x.", uc.cmd); } } diff --git a/tools/testing/selftests/kvm/x86_64/evmcs_test.c b/tools/testing/selftests/kvm/x86_64/evmcs_test.c index c49c2a28b0eb..36669684eca5 100644 --- a/tools/testing/selftests/kvm/x86_64/evmcs_test.c +++ b/tools/testing/selftests/kvm/x86_64/evmcs_test.c @@ -123,8 +123,6 @@ int main(int argc, char *argv[]) stage, run->exit_reason, exit_reason_str(run->exit_reason)); - memset(®s1, 0, sizeof(regs1)); - vcpu_regs_get(vm, VCPU_ID, ®s1); switch (get_ucall(vm, VCPU_ID, &uc)) { case UCALL_ABORT: TEST_ASSERT(false, "%s at %s:%d", (const char *)uc.args[0], @@ -144,6 +142,9 @@ int main(int argc, char *argv[]) stage, (ulong)uc.args[1]); state = vcpu_save_state(vm, VCPU_ID); + memset(®s1, 0, sizeof(regs1)); + vcpu_regs_get(vm, VCPU_ID, ®s1); + kvm_vm_release(vm); /* Restore state in a new VM. */ diff --git a/tools/testing/selftests/kvm/x86_64/hyperv_cpuid.c b/tools/testing/selftests/kvm/x86_64/hyperv_cpuid.c index 264425f75806..9a21e912097c 100644 --- a/tools/testing/selftests/kvm/x86_64/hyperv_cpuid.c +++ b/tools/testing/selftests/kvm/x86_64/hyperv_cpuid.c @@ -141,7 +141,13 @@ int main(int argc, char *argv[]) free(hv_cpuid_entries); - vcpu_ioctl(vm, VCPU_ID, KVM_ENABLE_CAP, &enable_evmcs_cap); + rv = _vcpu_ioctl(vm, VCPU_ID, KVM_ENABLE_CAP, &enable_evmcs_cap); + + if (rv) { + fprintf(stderr, + "Enlightened VMCS is unsupported, skip related test\n"); + goto vm_free; + } hv_cpuid_entries = kvm_get_supported_hv_cpuid(vm); if (!hv_cpuid_entries) @@ -151,6 +157,7 @@ int main(int argc, char *argv[]) free(hv_cpuid_entries); +vm_free: kvm_vm_free(vm); return 0; diff --git a/tools/testing/selftests/kvm/x86_64/smm_test.c b/tools/testing/selftests/kvm/x86_64/smm_test.c new file mode 100644 index 000000000000..fb8086964d83 --- /dev/null +++ b/tools/testing/selftests/kvm/x86_64/smm_test.c @@ -0,0 +1,157 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright (C) 2018, Red Hat, Inc. + * + * Tests for SMM. + */ +#define _GNU_SOURCE /* for program_invocation_short_name */ +#include <fcntl.h> +#include <stdio.h> +#include <stdlib.h> +#include <stdint.h> +#include <string.h> +#include <sys/ioctl.h> + +#include "test_util.h" + +#include "kvm_util.h" + +#include "vmx.h" + +#define VCPU_ID 1 + +#define PAGE_SIZE 4096 + +#define SMRAM_SIZE 65536 +#define SMRAM_MEMSLOT ((1 << 16) | 1) +#define SMRAM_PAGES (SMRAM_SIZE / PAGE_SIZE) +#define SMRAM_GPA 0x1000000 +#define SMRAM_STAGE 0xfe + +#define STR(x) #x +#define XSTR(s) STR(s) + +#define SYNC_PORT 0xe +#define DONE 0xff + +/* + * This is compiled as normal 64-bit code, however, SMI handler is executed + * in real-address mode. To stay simple we're limiting ourselves to a mode + * independent subset of asm here. + * SMI handler always report back fixed stage SMRAM_STAGE. + */ +uint8_t smi_handler[] = { + 0xb0, SMRAM_STAGE, /* mov $SMRAM_STAGE, %al */ + 0xe4, SYNC_PORT, /* in $SYNC_PORT, %al */ + 0x0f, 0xaa, /* rsm */ +}; + +void sync_with_host(uint64_t phase) +{ + asm volatile("in $" XSTR(SYNC_PORT)", %%al \n" + : : "a" (phase)); +} + +void self_smi(void) +{ + wrmsr(APIC_BASE_MSR + (APIC_ICR >> 4), + APIC_DEST_SELF | APIC_INT_ASSERT | APIC_DM_SMI); +} + +void guest_code(struct vmx_pages *vmx_pages) +{ + uint64_t apicbase = rdmsr(MSR_IA32_APICBASE); + + sync_with_host(1); + + wrmsr(MSR_IA32_APICBASE, apicbase | X2APIC_ENABLE); + + sync_with_host(2); + + self_smi(); + + sync_with_host(4); + + if (vmx_pages) { + GUEST_ASSERT(prepare_for_vmx_operation(vmx_pages)); + + sync_with_host(5); + + self_smi(); + + sync_with_host(7); + } + + sync_with_host(DONE); +} + +int main(int argc, char *argv[]) +{ + struct vmx_pages *vmx_pages = NULL; + vm_vaddr_t vmx_pages_gva = 0; + + struct kvm_regs regs; + struct kvm_vm *vm; + struct kvm_run *run; + struct kvm_x86_state *state; + int stage, stage_reported; + + /* Create VM */ + vm = vm_create_default(VCPU_ID, 0, guest_code); + + vcpu_set_cpuid(vm, VCPU_ID, kvm_get_supported_cpuid()); + + run = vcpu_state(vm, VCPU_ID); + + vm_userspace_mem_region_add(vm, VM_MEM_SRC_ANONYMOUS, SMRAM_GPA, + SMRAM_MEMSLOT, SMRAM_PAGES, 0); + TEST_ASSERT(vm_phy_pages_alloc(vm, SMRAM_PAGES, SMRAM_GPA, SMRAM_MEMSLOT) + == SMRAM_GPA, "could not allocate guest physical addresses?"); + + memset(addr_gpa2hva(vm, SMRAM_GPA), 0x0, SMRAM_SIZE); + memcpy(addr_gpa2hva(vm, SMRAM_GPA) + 0x8000, smi_handler, + sizeof(smi_handler)); + + vcpu_set_msr(vm, VCPU_ID, MSR_IA32_SMBASE, SMRAM_GPA); + + if (kvm_check_cap(KVM_CAP_NESTED_STATE)) { + vmx_pages = vcpu_alloc_vmx(vm, &vmx_pages_gva); + vcpu_args_set(vm, VCPU_ID, 1, vmx_pages_gva); + } else { + printf("will skip SMM test with VMX enabled\n"); + vcpu_args_set(vm, VCPU_ID, 1, 0); + } + + for (stage = 1;; stage++) { + _vcpu_run(vm, VCPU_ID); + TEST_ASSERT(run->exit_reason == KVM_EXIT_IO, + "Stage %d: unexpected exit reason: %u (%s),\n", + stage, run->exit_reason, + exit_reason_str(run->exit_reason)); + + memset(®s, 0, sizeof(regs)); + vcpu_regs_get(vm, VCPU_ID, ®s); + + stage_reported = regs.rax & 0xff; + + if (stage_reported == DONE) + goto done; + + TEST_ASSERT(stage_reported == stage || + stage_reported == SMRAM_STAGE, + "Unexpected stage: #%x, got %x", + stage, stage_reported); + + state = vcpu_save_state(vm, VCPU_ID); + kvm_vm_release(vm); + kvm_vm_restart(vm, O_RDWR); + vm_vcpu_add(vm, VCPU_ID, 0, 0); + vcpu_set_cpuid(vm, VCPU_ID, kvm_get_supported_cpuid()); + vcpu_load_state(vm, VCPU_ID, state); + run = vcpu_state(vm, VCPU_ID); + free(state); + } + +done: + kvm_vm_free(vm); +} diff --git a/tools/testing/selftests/kvm/x86_64/state_test.c b/tools/testing/selftests/kvm/x86_64/state_test.c index 4b3f556265f1..e0a3c0204b7c 100644 --- a/tools/testing/selftests/kvm/x86_64/state_test.c +++ b/tools/testing/selftests/kvm/x86_64/state_test.c @@ -156,8 +156,6 @@ int main(int argc, char *argv[]) stage, run->exit_reason, exit_reason_str(run->exit_reason)); - memset(®s1, 0, sizeof(regs1)); - vcpu_regs_get(vm, VCPU_ID, ®s1); switch (get_ucall(vm, VCPU_ID, &uc)) { case UCALL_ABORT: TEST_ASSERT(false, "%s at %s:%d", (const char *)uc.args[0], @@ -177,6 +175,9 @@ int main(int argc, char *argv[]) stage, (ulong)uc.args[1]); state = vcpu_save_state(vm, VCPU_ID); + memset(®s1, 0, sizeof(regs1)); + vcpu_regs_get(vm, VCPU_ID, ®s1); + kvm_vm_release(vm); /* Restore state in a new VM. */ diff --git a/tools/testing/selftests/net/fib_rule_tests.sh b/tools/testing/selftests/net/fib_rule_tests.sh index d4cfb6a7a086..4b7e107865bf 100755 --- a/tools/testing/selftests/net/fib_rule_tests.sh +++ b/tools/testing/selftests/net/fib_rule_tests.sh @@ -27,6 +27,7 @@ log_test() nsuccess=$((nsuccess+1)) printf "\n TEST: %-50s [ OK ]\n" "${msg}" else + ret=1 nfail=$((nfail+1)) printf "\n TEST: %-50s [FAIL]\n" "${msg}" if [ "${PAUSE_ON_FAIL}" = "yes" ]; then @@ -147,8 +148,8 @@ fib_rule6_test() fib_check_iproute_support "ipproto" "ipproto" if [ $? -eq 0 ]; then - match="ipproto icmp" - fib_rule6_test_match_n_redirect "$match" "$match" "ipproto icmp match" + match="ipproto ipv6-icmp" + fib_rule6_test_match_n_redirect "$match" "$match" "ipproto ipv6-icmp match" fi } @@ -245,4 +246,9 @@ setup run_fibrule_tests cleanup +if [ "$TESTS" != "none" ]; then + printf "\nTests passed: %3d\n" ${nsuccess} + printf "Tests failed: %3d\n" ${nfail} +fi + exit $ret diff --git a/tools/testing/selftests/net/fib_tests.sh b/tools/testing/selftests/net/fib_tests.sh index 1080ff55a788..0d2a5f4f1e63 100755 --- a/tools/testing/selftests/net/fib_tests.sh +++ b/tools/testing/selftests/net/fib_tests.sh @@ -605,6 +605,39 @@ run_cmd() return $rc } +check_expected() +{ + local out="$1" + local expected="$2" + local rc=0 + + [ "${out}" = "${expected}" ] && return 0 + + if [ -z "${out}" ]; then + if [ "$VERBOSE" = "1" ]; then + printf "\nNo route entry found\n" + printf "Expected:\n" + printf " ${expected}\n" + fi + return 1 + fi + + # tricky way to convert output to 1-line without ip's + # messy '\'; this drops all extra white space + out=$(echo ${out}) + if [ "${out}" != "${expected}" ]; then + rc=1 + if [ "${VERBOSE}" = "1" ]; then + printf " Unexpected route entry. Have:\n" + printf " ${out}\n" + printf " Expected:\n" + printf " ${expected}\n\n" + fi + fi + + return $rc +} + # add route for a prefix, flushing any existing routes first # expected to be the first step of a test add_route6() @@ -652,31 +685,7 @@ check_route6() pfx=$1 out=$($IP -6 ro ls match ${pfx} | sed -e 's/ pref medium//') - [ "${out}" = "${expected}" ] && return 0 - - if [ -z "${out}" ]; then - if [ "$VERBOSE" = "1" ]; then - printf "\nNo route entry found\n" - printf "Expected:\n" - printf " ${expected}\n" - fi - return 1 - fi - - # tricky way to convert output to 1-line without ip's - # messy '\'; this drops all extra white space - out=$(echo ${out}) - if [ "${out}" != "${expected}" ]; then - rc=1 - if [ "${VERBOSE}" = "1" ]; then - printf " Unexpected route entry. Have:\n" - printf " ${out}\n" - printf " Expected:\n" - printf " ${expected}\n\n" - fi - fi - - return $rc + check_expected "${out}" "${expected}" } route_cleanup() @@ -725,7 +734,7 @@ route_setup() ip -netns ns2 addr add 172.16.103.2/24 dev veth4 ip -netns ns2 addr add 172.16.104.1/24 dev dummy1 - set +ex + set +e } # assumption is that basic add of a single path route works @@ -960,7 +969,8 @@ ipv6_addr_metric_test() run_cmd "$IP li set dev dummy2 down" rc=$? if [ $rc -eq 0 ]; then - check_route6 "" + out=$($IP -6 ro ls match 2001:db8:104::/64) + check_expected "${out}" "" rc=$? fi log_test $rc 0 "Prefix route removed on link down" @@ -1091,38 +1101,13 @@ check_route() local pfx local expected="$1" local out - local rc=0 set -- $expected pfx=$1 [ "${pfx}" = "unreachable" ] && pfx=$2 out=$($IP ro ls match ${pfx}) - [ "${out}" = "${expected}" ] && return 0 - - if [ -z "${out}" ]; then - if [ "$VERBOSE" = "1" ]; then - printf "\nNo route entry found\n" - printf "Expected:\n" - printf " ${expected}\n" - fi - return 1 - fi - - # tricky way to convert output to 1-line without ip's - # messy '\'; this drops all extra white space - out=$(echo ${out}) - if [ "${out}" != "${expected}" ]; then - rc=1 - if [ "${VERBOSE}" = "1" ]; then - printf " Unexpected route entry. Have:\n" - printf " ${out}\n" - printf " Expected:\n" - printf " ${expected}\n\n" - fi - fi - - return $rc + check_expected "${out}" "${expected}" } # assumption is that basic add of a single path route works @@ -1387,7 +1372,8 @@ ipv4_addr_metric_test() run_cmd "$IP li set dev dummy2 down" rc=$? if [ $rc -eq 0 ]; then - check_route "" + out=$($IP ro ls match 172.16.104.0/24) + check_expected "${out}" "" rc=$? fi log_test $rc 0 "Prefix route removed on link down" diff --git a/tools/testing/selftests/net/run_afpackettests b/tools/testing/selftests/net/run_afpackettests index 2dc95fda7ef7..ea5938ec009a 100755 --- a/tools/testing/selftests/net/run_afpackettests +++ b/tools/testing/selftests/net/run_afpackettests @@ -6,12 +6,14 @@ if [ $(id -u) != 0 ]; then exit 0 fi +ret=0 echo "--------------------" echo "running psock_fanout test" echo "--------------------" ./in_netns.sh ./psock_fanout if [ $? -ne 0 ]; then echo "[FAIL]" + ret=1 else echo "[PASS]" fi @@ -22,6 +24,7 @@ echo "--------------------" ./in_netns.sh ./psock_tpacket if [ $? -ne 0 ]; then echo "[FAIL]" + ret=1 else echo "[PASS]" fi @@ -32,6 +35,8 @@ echo "--------------------" ./in_netns.sh ./txring_overwrite if [ $? -ne 0 ]; then echo "[FAIL]" + ret=1 else echo "[PASS]" fi +exit $ret diff --git a/tools/testing/selftests/net/run_netsocktests b/tools/testing/selftests/net/run_netsocktests index b093f39c298c..14e41faf2c57 100755 --- a/tools/testing/selftests/net/run_netsocktests +++ b/tools/testing/selftests/net/run_netsocktests @@ -7,7 +7,7 @@ echo "--------------------" ./socket if [ $? -ne 0 ]; then echo "[FAIL]" + exit 1 else echo "[PASS]" fi - diff --git a/tools/testing/selftests/netfilter/Makefile b/tools/testing/selftests/netfilter/Makefile index c9ff2b47bd1c..a37cb1192c6a 100644 --- a/tools/testing/selftests/netfilter/Makefile +++ b/tools/testing/selftests/netfilter/Makefile @@ -1,6 +1,6 @@ # SPDX-License-Identifier: GPL-2.0 # Makefile for netfilter selftests -TEST_PROGS := nft_trans_stress.sh nft_nat.sh +TEST_PROGS := nft_trans_stress.sh nft_nat.sh conntrack_icmp_related.sh include ../lib.mk diff --git a/tools/testing/selftests/netfilter/conntrack_icmp_related.sh b/tools/testing/selftests/netfilter/conntrack_icmp_related.sh new file mode 100755 index 000000000000..b48e1833bc89 --- /dev/null +++ b/tools/testing/selftests/netfilter/conntrack_icmp_related.sh @@ -0,0 +1,283 @@ +#!/bin/bash +# +# check that ICMP df-needed/pkttoobig icmp are set are set as related +# state +# +# Setup is: +# +# nsclient1 -> nsrouter1 -> nsrouter2 -> nsclient2 +# MTU 1500, except for nsrouter2 <-> nsclient2 link (1280). +# ping nsclient2 from nsclient1, checking that conntrack did set RELATED +# 'fragmentation needed' icmp packet. +# +# In addition, nsrouter1 will perform IP masquerading, i.e. also +# check the icmp errors are propagated to the correct host as per +# nat of "established" icmp-echo "connection". + +# Kselftest framework requirement - SKIP code is 4. +ksft_skip=4 +ret=0 + +nft --version > /dev/null 2>&1 +if [ $? -ne 0 ];then + echo "SKIP: Could not run test without nft tool" + exit $ksft_skip +fi + +ip -Version > /dev/null 2>&1 +if [ $? -ne 0 ];then + echo "SKIP: Could not run test without ip tool" + exit $ksft_skip +fi + +cleanup() { + for i in 1 2;do ip netns del nsclient$i;done + for i in 1 2;do ip netns del nsrouter$i;done +} + +ipv4() { + echo -n 192.168.$1.2 +} + +ipv6 () { + echo -n dead:$1::2 +} + +check_counter() +{ + ns=$1 + name=$2 + expect=$3 + local lret=0 + + cnt=$(ip netns exec $ns nft list counter inet filter "$name" | grep -q "$expect") + if [ $? -ne 0 ]; then + echo "ERROR: counter $name in $ns has unexpected value (expected $expect)" 1>&2 + ip netns exec $ns nft list counter inet filter "$name" 1>&2 + lret=1 + fi + + return $lret +} + +check_unknown() +{ + expect="packets 0 bytes 0" + for n in nsclient1 nsclient2 nsrouter1 nsrouter2; do + check_counter $n "unknown" "$expect" + if [ $? -ne 0 ] ;then + return 1 + fi + done + + return 0 +} + +for n in nsclient1 nsclient2 nsrouter1 nsrouter2; do + ip netns add $n + ip -net $n link set lo up +done + +DEV=veth0 +ip link add $DEV netns nsclient1 type veth peer name eth1 netns nsrouter1 +DEV=veth0 +ip link add $DEV netns nsclient2 type veth peer name eth1 netns nsrouter2 + +DEV=veth0 +ip link add $DEV netns nsrouter1 type veth peer name eth2 netns nsrouter2 + +DEV=veth0 +for i in 1 2; do + ip -net nsclient$i link set $DEV up + ip -net nsclient$i addr add $(ipv4 $i)/24 dev $DEV + ip -net nsclient$i addr add $(ipv6 $i)/64 dev $DEV +done + +ip -net nsrouter1 link set eth1 up +ip -net nsrouter1 link set veth0 up + +ip -net nsrouter2 link set eth1 up +ip -net nsrouter2 link set eth2 up + +ip -net nsclient1 route add default via 192.168.1.1 +ip -net nsclient1 -6 route add default via dead:1::1 + +ip -net nsclient2 route add default via 192.168.2.1 +ip -net nsclient2 route add default via dead:2::1 + +i=3 +ip -net nsrouter1 addr add 192.168.1.1/24 dev eth1 +ip -net nsrouter1 addr add 192.168.3.1/24 dev veth0 +ip -net nsrouter1 addr add dead:1::1/64 dev eth1 +ip -net nsrouter1 addr add dead:3::1/64 dev veth0 +ip -net nsrouter1 route add default via 192.168.3.10 +ip -net nsrouter1 -6 route add default via dead:3::10 + +ip -net nsrouter2 addr add 192.168.2.1/24 dev eth1 +ip -net nsrouter2 addr add 192.168.3.10/24 dev eth2 +ip -net nsrouter2 addr add dead:2::1/64 dev eth1 +ip -net nsrouter2 addr add dead:3::10/64 dev eth2 +ip -net nsrouter2 route add default via 192.168.3.1 +ip -net nsrouter2 route add default via dead:3::1 + +sleep 2 +for i in 4 6; do + ip netns exec nsrouter1 sysctl -q net.ipv$i.conf.all.forwarding=1 + ip netns exec nsrouter2 sysctl -q net.ipv$i.conf.all.forwarding=1 +done + +for netns in nsrouter1 nsrouter2; do +ip netns exec $netns nft -f - <<EOF +table inet filter { + counter unknown { } + counter related { } + chain forward { + type filter hook forward priority 0; policy accept; + meta l4proto icmpv6 icmpv6 type "packet-too-big" ct state "related" counter name "related" accept + meta l4proto icmp icmp type "destination-unreachable" ct state "related" counter name "related" accept + meta l4proto { icmp, icmpv6 } ct state new,established accept + counter name "unknown" drop + } +} +EOF +done + +ip netns exec nsclient1 nft -f - <<EOF +table inet filter { + counter unknown { } + counter related { } + chain input { + type filter hook input priority 0; policy accept; + meta l4proto { icmp, icmpv6 } ct state established,untracked accept + + meta l4proto { icmp, icmpv6 } ct state "related" counter name "related" accept + counter name "unknown" drop + } +} +EOF + +ip netns exec nsclient2 nft -f - <<EOF +table inet filter { + counter unknown { } + counter new { } + counter established { } + + chain input { + type filter hook input priority 0; policy accept; + meta l4proto { icmp, icmpv6 } ct state established,untracked accept + + meta l4proto { icmp, icmpv6 } ct state "new" counter name "new" accept + meta l4proto { icmp, icmpv6 } ct state "established" counter name "established" accept + counter name "unknown" drop + } + chain output { + type filter hook output priority 0; policy accept; + meta l4proto { icmp, icmpv6 } ct state established,untracked accept + + meta l4proto { icmp, icmpv6 } ct state "new" counter name "new" + meta l4proto { icmp, icmpv6 } ct state "established" counter name "established" + counter name "unknown" drop + } +} +EOF + + +# make sure NAT core rewrites adress of icmp error if nat is used according to +# conntrack nat information (icmp error will be directed at nsrouter1 address, +# but it needs to be routed to nsclient1 address). +ip netns exec nsrouter1 nft -f - <<EOF +table ip nat { + chain postrouting { + type nat hook postrouting priority 0; policy accept; + ip protocol icmp oifname "veth0" counter masquerade + } +} +table ip6 nat { + chain postrouting { + type nat hook postrouting priority 0; policy accept; + ip6 nexthdr icmpv6 oifname "veth0" counter masquerade + } +} +EOF + +ip netns exec nsrouter2 ip link set eth1 mtu 1280 +ip netns exec nsclient2 ip link set veth0 mtu 1280 +sleep 1 + +ip netns exec nsclient1 ping -c 1 -s 1000 -q -M do 192.168.2.2 >/dev/null +if [ $? -ne 0 ]; then + echo "ERROR: netns ip routing/connectivity broken" 1>&2 + cleanup + exit 1 +fi +ip netns exec nsclient1 ping6 -q -c 1 -s 1000 dead:2::2 >/dev/null +if [ $? -ne 0 ]; then + echo "ERROR: netns ipv6 routing/connectivity broken" 1>&2 + cleanup + exit 1 +fi + +check_unknown +if [ $? -ne 0 ]; then + ret=1 +fi + +expect="packets 0 bytes 0" +for netns in nsrouter1 nsrouter2 nsclient1;do + check_counter "$netns" "related" "$expect" + if [ $? -ne 0 ]; then + ret=1 + fi +done + +expect="packets 2 bytes 2076" +check_counter nsclient2 "new" "$expect" +if [ $? -ne 0 ]; then + ret=1 +fi + +ip netns exec nsclient1 ping -q -c 1 -s 1300 -M do 192.168.2.2 > /dev/null +if [ $? -eq 0 ]; then + echo "ERROR: ping should have failed with PMTU too big error" 1>&2 + ret=1 +fi + +# nsrouter2 should have generated the icmp error, so +# related counter should be 0 (its in forward). +expect="packets 0 bytes 0" +check_counter "nsrouter2" "related" "$expect" +if [ $? -ne 0 ]; then + ret=1 +fi + +# but nsrouter1 should have seen it, same for nsclient1. +expect="packets 1 bytes 576" +for netns in nsrouter1 nsclient1;do + check_counter "$netns" "related" "$expect" + if [ $? -ne 0 ]; then + ret=1 + fi +done + +ip netns exec nsclient1 ping6 -c 1 -s 1300 dead:2::2 > /dev/null +if [ $? -eq 0 ]; then + echo "ERROR: ping6 should have failed with PMTU too big error" 1>&2 + ret=1 +fi + +expect="packets 2 bytes 1856" +for netns in nsrouter1 nsclient1;do + check_counter "$netns" "related" "$expect" + if [ $? -ne 0 ]; then + ret=1 + fi +done + +if [ $ret -eq 0 ];then + echo "PASS: icmp mtu error had RELATED state" +else + echo "ERROR: icmp error RELATED state test has failed" +fi + +cleanup +exit $ret diff --git a/tools/testing/selftests/netfilter/nft_nat.sh b/tools/testing/selftests/netfilter/nft_nat.sh index 8ec76681605c..3194007cf8d1 100755 --- a/tools/testing/selftests/netfilter/nft_nat.sh +++ b/tools/testing/selftests/netfilter/nft_nat.sh @@ -321,6 +321,7 @@ EOF test_masquerade6() { + local natflags=$1 local lret=0 ip netns exec ns0 sysctl net.ipv6.conf.all.forwarding=1 > /dev/null @@ -354,13 +355,13 @@ ip netns exec ns0 nft -f - <<EOF table ip6 nat { chain postrouting { type nat hook postrouting priority 0; policy accept; - meta oif veth0 masquerade + meta oif veth0 masquerade $natflags } } EOF ip netns exec ns2 ping -q -c 1 dead:1::99 > /dev/null # ping ns2->ns1 if [ $? -ne 0 ] ; then - echo "ERROR: cannot ping ns1 from ns2 with active ipv6 masquerading" + echo "ERROR: cannot ping ns1 from ns2 with active ipv6 masquerade $natflags" lret=1 fi @@ -397,19 +398,26 @@ EOF fi done + ip netns exec ns2 ping -q -c 1 dead:1::99 > /dev/null # ping ns2->ns1 + if [ $? -ne 0 ] ; then + echo "ERROR: cannot ping ns1 from ns2 with active ipv6 masquerade $natflags (attempt 2)" + lret=1 + fi + ip netns exec ns0 nft flush chain ip6 nat postrouting if [ $? -ne 0 ]; then echo "ERROR: Could not flush ip6 nat postrouting" 1>&2 lret=1 fi - test $lret -eq 0 && echo "PASS: IPv6 masquerade for ns2" + test $lret -eq 0 && echo "PASS: IPv6 masquerade $natflags for ns2" return $lret } test_masquerade() { + local natflags=$1 local lret=0 ip netns exec ns0 sysctl net.ipv4.conf.veth0.forwarding=1 > /dev/null @@ -417,7 +425,7 @@ test_masquerade() ip netns exec ns2 ping -q -c 1 10.0.1.99 > /dev/null # ping ns2->ns1 if [ $? -ne 0 ] ; then - echo "ERROR: canot ping ns1 from ns2" + echo "ERROR: cannot ping ns1 from ns2 $natflags" lret=1 fi @@ -443,13 +451,13 @@ ip netns exec ns0 nft -f - <<EOF table ip nat { chain postrouting { type nat hook postrouting priority 0; policy accept; - meta oif veth0 masquerade + meta oif veth0 masquerade $natflags } } EOF ip netns exec ns2 ping -q -c 1 10.0.1.99 > /dev/null # ping ns2->ns1 if [ $? -ne 0 ] ; then - echo "ERROR: cannot ping ns1 from ns2 with active ip masquerading" + echo "ERROR: cannot ping ns1 from ns2 with active ip masquere $natflags" lret=1 fi @@ -485,13 +493,19 @@ EOF fi done + ip netns exec ns2 ping -q -c 1 10.0.1.99 > /dev/null # ping ns2->ns1 + if [ $? -ne 0 ] ; then + echo "ERROR: cannot ping ns1 from ns2 with active ip masquerade $natflags (attempt 2)" + lret=1 + fi + ip netns exec ns0 nft flush chain ip nat postrouting if [ $? -ne 0 ]; then echo "ERROR: Could not flush nat postrouting" 1>&2 lret=1 fi - test $lret -eq 0 && echo "PASS: IP masquerade for ns2" + test $lret -eq 0 && echo "PASS: IP masquerade $natflags for ns2" return $lret } @@ -750,8 +764,12 @@ test_local_dnat test_local_dnat6 reset_counters -test_masquerade -test_masquerade6 +test_masquerade "" +test_masquerade6 "" + +reset_counters +test_masquerade "fully-random" +test_masquerade6 "fully-random" reset_counters test_redirect diff --git a/tools/testing/selftests/proc/proc-pid-vm.c b/tools/testing/selftests/proc/proc-pid-vm.c index 7202bbac976e..853aa164a401 100644 --- a/tools/testing/selftests/proc/proc-pid-vm.c +++ b/tools/testing/selftests/proc/proc-pid-vm.c @@ -187,8 +187,8 @@ static int make_exe(const uint8_t *payload, size_t len) ph.p_offset = 0; ph.p_vaddr = VADDR; ph.p_paddr = 0; - ph.p_filesz = sizeof(struct elf64_hdr) + sizeof(struct elf64_phdr) + sizeof(payload); - ph.p_memsz = sizeof(struct elf64_hdr) + sizeof(struct elf64_phdr) + sizeof(payload); + ph.p_filesz = sizeof(struct elf64_hdr) + sizeof(struct elf64_phdr) + len; + ph.p_memsz = sizeof(struct elf64_hdr) + sizeof(struct elf64_phdr) + len; ph.p_align = 4096; fd = openat(AT_FDCWD, "/tmp", O_WRONLY|O_EXCL|O_TMPFILE, 0700); diff --git a/tools/testing/selftests/proc/proc-self-map-files-002.c b/tools/testing/selftests/proc/proc-self-map-files-002.c index 762cb01f2ca7..47b7473dedef 100644 --- a/tools/testing/selftests/proc/proc-self-map-files-002.c +++ b/tools/testing/selftests/proc/proc-self-map-files-002.c @@ -46,12 +46,9 @@ static void fail(const char *fmt, unsigned long a, unsigned long b) int main(void) { - const unsigned int PAGE_SIZE = sysconf(_SC_PAGESIZE); -#ifdef __arm__ - unsigned long va = 2 * PAGE_SIZE; -#else - unsigned long va = 0; -#endif + const int PAGE_SIZE = sysconf(_SC_PAGESIZE); + const unsigned long va_max = 1UL << 32; + unsigned long va; void *p; int fd; unsigned long a, b; @@ -60,10 +57,13 @@ int main(void) if (fd == -1) return 1; - p = mmap((void *)va, PAGE_SIZE, PROT_NONE, MAP_PRIVATE|MAP_FILE|MAP_FIXED, fd, 0); - if (p == MAP_FAILED) { - if (errno == EPERM) - return 4; + for (va = 0; va < va_max; va += PAGE_SIZE) { + p = mmap((void *)va, PAGE_SIZE, PROT_NONE, MAP_PRIVATE|MAP_FILE|MAP_FIXED, fd, 0); + if (p == (void *)va) + break; + } + if (va == va_max) { + fprintf(stderr, "error: mmap doesn't like you\n"); return 1; } diff --git a/tools/testing/selftests/rcutorture/bin/configNR_CPUS.sh b/tools/testing/selftests/rcutorture/bin/configNR_CPUS.sh index 43540f1828cc..2deea2169fc2 100755 --- a/tools/testing/selftests/rcutorture/bin/configNR_CPUS.sh +++ b/tools/testing/selftests/rcutorture/bin/configNR_CPUS.sh @@ -1,4 +1,5 @@ #!/bin/bash +# SPDX-License-Identifier: GPL-2.0+ # # Extract the number of CPUs expected from the specified Kconfig-file # fragment by checking CONFIG_SMP and CONFIG_NR_CPUS. If the specified @@ -7,23 +8,9 @@ # # Usage: configNR_CPUS.sh config-frag # -# This program is free software; you can redistribute it and/or modify -# it under the terms of the GNU General Public License as published by -# the Free Software Foundation; either version 2 of the License, or -# (at your option) any later version. -# -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -# GNU General Public License for more details. -# -# You should have received a copy of the GNU General Public License -# along with this program; if not, you can access it online at -# http://www.gnu.org/licenses/gpl-2.0.html. -# # Copyright (C) IBM Corporation, 2013 # -# Authors: Paul E. McKenney <paulmck@linux.vnet.ibm.com> +# Authors: Paul E. McKenney <paulmck@linux.ibm.com> cf=$1 if test ! -r $cf diff --git a/tools/testing/selftests/rcutorture/bin/config_override.sh b/tools/testing/selftests/rcutorture/bin/config_override.sh index ef7fcbac3d42..90016c359e83 100755 --- a/tools/testing/selftests/rcutorture/bin/config_override.sh +++ b/tools/testing/selftests/rcutorture/bin/config_override.sh @@ -1,4 +1,5 @@ #!/bin/bash +# SPDX-License-Identifier: GPL-2.0+ # # config_override.sh base override # @@ -6,23 +7,9 @@ # that conflict with any in override, concatenating what remains and # sending the result to standard output. # -# This program is free software; you can redistribute it and/or modify -# it under the terms of the GNU General Public License as published by -# the Free Software Foundation; either version 2 of the License, or -# (at your option) any later version. -# -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -# GNU General Public License for more details. -# -# You should have received a copy of the GNU General Public License -# along with this program; if not, you can access it online at -# http://www.gnu.org/licenses/gpl-2.0.html. -# # Copyright (C) IBM Corporation, 2017 # -# Authors: Paul E. McKenney <paulmck@linux.vnet.ibm.com> +# Authors: Paul E. McKenney <paulmck@linux.ibm.com> base=$1 if test -r $base diff --git a/tools/testing/selftests/rcutorture/bin/configcheck.sh b/tools/testing/selftests/rcutorture/bin/configcheck.sh index 197deece7c7c..31584cee84d7 100755 --- a/tools/testing/selftests/rcutorture/bin/configcheck.sh +++ b/tools/testing/selftests/rcutorture/bin/configcheck.sh @@ -1,23 +1,11 @@ #!/bin/bash -# Usage: configcheck.sh .config .config-template -# -# This program is free software; you can redistribute it and/or modify -# it under the terms of the GNU General Public License as published by -# the Free Software Foundation; either version 2 of the License, or -# (at your option) any later version. +# SPDX-License-Identifier: GPL-2.0+ # -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -# GNU General Public License for more details. -# -# You should have received a copy of the GNU General Public License -# along with this program; if not, you can access it online at -# http://www.gnu.org/licenses/gpl-2.0.html. +# Usage: configcheck.sh .config .config-template # # Copyright (C) IBM Corporation, 2011 # -# Authors: Paul E. McKenney <paulmck@linux.vnet.ibm.com> +# Authors: Paul E. McKenney <paulmck@linux.ibm.com> T=${TMPDIR-/tmp}/abat-chk-config.sh.$$ trap 'rm -rf $T' 0 @@ -26,6 +14,7 @@ mkdir $T cat $1 > $T/.config cat $2 | sed -e 's/\(.*\)=n/# \1 is not set/' -e 's/^#CHECK#//' | +grep -v '^CONFIG_INITRAMFS_SOURCE' | awk ' { print "if grep -q \"" $0 "\" < '"$T/.config"'"; diff --git a/tools/testing/selftests/rcutorture/bin/configinit.sh b/tools/testing/selftests/rcutorture/bin/configinit.sh index 65541c21a544..40359486b3a8 100755 --- a/tools/testing/selftests/rcutorture/bin/configinit.sh +++ b/tools/testing/selftests/rcutorture/bin/configinit.sh @@ -1,4 +1,5 @@ #!/bin/bash +# SPDX-License-Identifier: GPL-2.0+ # # Usage: configinit.sh config-spec-file build-output-dir results-dir # @@ -14,23 +15,9 @@ # for example, "O=/tmp/foo". If this argument is omitted, the .config # file will be generated directly in the current directory. # -# This program is free software; you can redistribute it and/or modify -# it under the terms of the GNU General Public License as published by -# the Free Software Foundation; either version 2 of the License, or -# (at your option) any later version. -# -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -# GNU General Public License for more details. -# -# You should have received a copy of the GNU General Public License -# along with this program; if not, you can access it online at -# http://www.gnu.org/licenses/gpl-2.0.html. -# # Copyright (C) IBM Corporation, 2013 # -# Authors: Paul E. McKenney <paulmck@linux.vnet.ibm.com> +# Authors: Paul E. McKenney <paulmck@linux.ibm.com> T=${TMPDIR-/tmp}/configinit.sh.$$ trap 'rm -rf $T' 0 diff --git a/tools/testing/selftests/rcutorture/bin/cpus2use.sh b/tools/testing/selftests/rcutorture/bin/cpus2use.sh index bb99cde3f5f9..ff7102212703 100755 --- a/tools/testing/selftests/rcutorture/bin/cpus2use.sh +++ b/tools/testing/selftests/rcutorture/bin/cpus2use.sh @@ -1,26 +1,13 @@ #!/bin/bash +# SPDX-License-Identifier: GPL-2.0+ # # Get an estimate of how CPU-hoggy to be. # # Usage: cpus2use.sh # -# This program is free software; you can redistribute it and/or modify -# it under the terms of the GNU General Public License as published by -# the Free Software Foundation; either version 2 of the License, or -# (at your option) any later version. -# -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -# GNU General Public License for more details. -# -# You should have received a copy of the GNU General Public License -# along with this program; if not, you can access it online at -# http://www.gnu.org/licenses/gpl-2.0.html. -# # Copyright (C) IBM Corporation, 2013 # -# Authors: Paul E. McKenney <paulmck@linux.vnet.ibm.com> +# Authors: Paul E. McKenney <paulmck@linux.ibm.com> ncpus=`grep '^processor' /proc/cpuinfo | wc -l` idlecpus=`mpstat | tail -1 | \ diff --git a/tools/testing/selftests/rcutorture/bin/functions.sh b/tools/testing/selftests/rcutorture/bin/functions.sh index 65f6655026f0..6bcb8b5b2ff2 100644 --- a/tools/testing/selftests/rcutorture/bin/functions.sh +++ b/tools/testing/selftests/rcutorture/bin/functions.sh @@ -1,24 +1,11 @@ #!/bin/bash +# SPDX-License-Identifier: GPL-2.0+ # # Shell functions for the rest of the scripts. # -# This program is free software; you can redistribute it and/or modify -# it under the terms of the GNU General Public License as published by -# the Free Software Foundation; either version 2 of the License, or -# (at your option) any later version. -# -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -# GNU General Public License for more details. -# -# You should have received a copy of the GNU General Public License -# along with this program; if not, you can access it online at -# http://www.gnu.org/licenses/gpl-2.0.html. -# # Copyright (C) IBM Corporation, 2013 # -# Authors: Paul E. McKenney <paulmck@linux.vnet.ibm.com> +# Authors: Paul E. McKenney <paulmck@linux.ibm.com> # bootparam_hotplug_cpu bootparam-string # diff --git a/tools/testing/selftests/rcutorture/bin/jitter.sh b/tools/testing/selftests/rcutorture/bin/jitter.sh index 3633828375e3..435b60933985 100755 --- a/tools/testing/selftests/rcutorture/bin/jitter.sh +++ b/tools/testing/selftests/rcutorture/bin/jitter.sh @@ -1,4 +1,5 @@ #!/bin/bash +# SPDX-License-Identifier: GPL-2.0+ # # Alternate sleeping and spinning on randomly selected CPUs. The purpose # of this script is to inflict random OS jitter on a concurrently running @@ -11,23 +12,9 @@ # sleepmax: Maximum microseconds to sleep, defaults to one second. # spinmax: Maximum microseconds to spin, defaults to one millisecond. # -# This program is free software; you can redistribute it and/or modify -# it under the terms of the GNU General Public License as published by -# the Free Software Foundation; either version 2 of the License, or -# (at your option) any later version. -# -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -# GNU General Public License for more details. -# -# You should have received a copy of the GNU General Public License -# along with this program; if not, you can access it online at -# http://www.gnu.org/licenses/gpl-2.0.html. -# # Copyright (C) IBM Corporation, 2016 # -# Authors: Paul E. McKenney <paulmck@linux.vnet.ibm.com> +# Authors: Paul E. McKenney <paulmck@linux.ibm.com> me=$(($1 * 1000)) duration=$2 diff --git a/tools/testing/selftests/rcutorture/bin/kvm-build.sh b/tools/testing/selftests/rcutorture/bin/kvm-build.sh index 9115fcdb5617..c27a0bbb9c02 100755 --- a/tools/testing/selftests/rcutorture/bin/kvm-build.sh +++ b/tools/testing/selftests/rcutorture/bin/kvm-build.sh @@ -1,26 +1,13 @@ #!/bin/bash +# SPDX-License-Identifier: GPL-2.0+ # # Build a kvm-ready Linux kernel from the tree in the current directory. # # Usage: kvm-build.sh config-template build-dir resdir # -# This program is free software; you can redistribute it and/or modify -# it under the terms of the GNU General Public License as published by -# the Free Software Foundation; either version 2 of the License, or -# (at your option) any later version. -# -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -# GNU General Public License for more details. -# -# You should have received a copy of the GNU General Public License -# along with this program; if not, you can access it online at -# http://www.gnu.org/licenses/gpl-2.0.html. -# # Copyright (C) IBM Corporation, 2011 # -# Authors: Paul E. McKenney <paulmck@linux.vnet.ibm.com> +# Authors: Paul E. McKenney <paulmck@linux.ibm.com> config_template=${1} if test -z "$config_template" -o ! -f "$config_template" -o ! -r "$config_template" diff --git a/tools/testing/selftests/rcutorture/bin/kvm-find-errors.sh b/tools/testing/selftests/rcutorture/bin/kvm-find-errors.sh index 98f650c9bf54..8426fe1f15ee 100755 --- a/tools/testing/selftests/rcutorture/bin/kvm-find-errors.sh +++ b/tools/testing/selftests/rcutorture/bin/kvm-find-errors.sh @@ -1,4 +1,5 @@ #!/bin/sh +# SPDX-License-Identifier: GPL-2.0+ # # Invoke a text editor on all console.log files for all runs with diagnostics, # that is, on all such files having a console.log.diags counterpart. @@ -10,6 +11,10 @@ # # The "directory" above should end with the date/time directory, for example, # "tools/testing/selftests/rcutorture/res/2018.02.25-14:27:27". +# +# Copyright (C) IBM Corporation, 2018 +# +# Author: Paul E. McKenney <paulmck@linux.ibm.com> rundir="${1}" if test -z "$rundir" -o ! -d "$rundir" diff --git a/tools/testing/selftests/rcutorture/bin/kvm-recheck-lock.sh b/tools/testing/selftests/rcutorture/bin/kvm-recheck-lock.sh index 2de92f43ee8c..f3a7a5e2b89d 100755 --- a/tools/testing/selftests/rcutorture/bin/kvm-recheck-lock.sh +++ b/tools/testing/selftests/rcutorture/bin/kvm-recheck-lock.sh @@ -1,26 +1,13 @@ #!/bin/bash +# SPDX-License-Identifier: GPL-2.0+ # # Analyze a given results directory for locktorture progress. # # Usage: kvm-recheck-lock.sh resdir # -# This program is free software; you can redistribute it and/or modify -# it under the terms of the GNU General Public License as published by -# the Free Software Foundation; either version 2 of the License, or -# (at your option) any later version. -# -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -# GNU General Public License for more details. -# -# You should have received a copy of the GNU General Public License -# along with this program; if not, you can access it online at -# http://www.gnu.org/licenses/gpl-2.0.html. -# # Copyright (C) IBM Corporation, 2014 # -# Authors: Paul E. McKenney <paulmck@linux.vnet.ibm.com> +# Authors: Paul E. McKenney <paulmck@linux.ibm.com> i="$1" if test -d "$i" -a -r "$i" diff --git a/tools/testing/selftests/rcutorture/bin/kvm-recheck-rcu.sh b/tools/testing/selftests/rcutorture/bin/kvm-recheck-rcu.sh index 0fa8a61ccb7b..2a7f3f4756a7 100755 --- a/tools/testing/selftests/rcutorture/bin/kvm-recheck-rcu.sh +++ b/tools/testing/selftests/rcutorture/bin/kvm-recheck-rcu.sh @@ -1,26 +1,13 @@ #!/bin/bash +# SPDX-License-Identifier: GPL-2.0+ # # Analyze a given results directory for rcutorture progress. # # Usage: kvm-recheck-rcu.sh resdir # -# This program is free software; you can redistribute it and/or modify -# it under the terms of the GNU General Public License as published by -# the Free Software Foundation; either version 2 of the License, or -# (at your option) any later version. -# -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -# GNU General Public License for more details. -# -# You should have received a copy of the GNU General Public License -# along with this program; if not, you can access it online at -# http://www.gnu.org/licenses/gpl-2.0.html. -# # Copyright (C) IBM Corporation, 2014 # -# Authors: Paul E. McKenney <paulmck@linux.vnet.ibm.com> +# Authors: Paul E. McKenney <paulmck@linux.ibm.com> i="$1" if test -d "$i" -a -r "$i" diff --git a/tools/testing/selftests/rcutorture/bin/kvm-recheck-rcuperf-ftrace.sh b/tools/testing/selftests/rcutorture/bin/kvm-recheck-rcuperf-ftrace.sh index 8948f7926b21..7d3c2be66c64 100755 --- a/tools/testing/selftests/rcutorture/bin/kvm-recheck-rcuperf-ftrace.sh +++ b/tools/testing/selftests/rcutorture/bin/kvm-recheck-rcuperf-ftrace.sh @@ -1,4 +1,5 @@ #!/bin/bash +# SPDX-License-Identifier: GPL-2.0+ # # Analyze a given results directory for rcuperf performance measurements, # looking for ftrace data. Exits with 0 if data was found, analyzed, and @@ -7,23 +8,9 @@ # # Usage: kvm-recheck-rcuperf-ftrace.sh resdir # -# This program is free software; you can redistribute it and/or modify -# it under the terms of the GNU General Public License as published by -# the Free Software Foundation; either version 2 of the License, or -# (at your option) any later version. -# -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -# GNU General Public License for more details. -# -# You should have received a copy of the GNU General Public License -# along with this program; if not, you can access it online at -# http://www.gnu.org/licenses/gpl-2.0.html. -# # Copyright (C) IBM Corporation, 2016 # -# Authors: Paul E. McKenney <paulmck@linux.vnet.ibm.com> +# Authors: Paul E. McKenney <paulmck@linux.ibm.com> i="$1" . functions.sh diff --git a/tools/testing/selftests/rcutorture/bin/kvm-recheck-rcuperf.sh b/tools/testing/selftests/rcutorture/bin/kvm-recheck-rcuperf.sh index ccebf772fa1e..db0375a57f28 100755 --- a/tools/testing/selftests/rcutorture/bin/kvm-recheck-rcuperf.sh +++ b/tools/testing/selftests/rcutorture/bin/kvm-recheck-rcuperf.sh @@ -1,26 +1,13 @@ #!/bin/bash +# SPDX-License-Identifier: GPL-2.0+ # # Analyze a given results directory for rcuperf performance measurements. # # Usage: kvm-recheck-rcuperf.sh resdir # -# This program is free software; you can redistribute it and/or modify -# it under the terms of the GNU General Public License as published by -# the Free Software Foundation; either version 2 of the License, or -# (at your option) any later version. -# -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -# GNU General Public License for more details. -# -# You should have received a copy of the GNU General Public License -# along with this program; if not, you can access it online at -# http://www.gnu.org/licenses/gpl-2.0.html. -# # Copyright (C) IBM Corporation, 2016 # -# Authors: Paul E. McKenney <paulmck@linux.vnet.ibm.com> +# Authors: Paul E. McKenney <paulmck@linux.ibm.com> i="$1" if test -d "$i" -a -r "$i" diff --git a/tools/testing/selftests/rcutorture/bin/kvm-recheck.sh b/tools/testing/selftests/rcutorture/bin/kvm-recheck.sh index c9bab57a77eb..2adde6aaafdb 100755 --- a/tools/testing/selftests/rcutorture/bin/kvm-recheck.sh +++ b/tools/testing/selftests/rcutorture/bin/kvm-recheck.sh @@ -1,4 +1,5 @@ #!/bin/bash +# SPDX-License-Identifier: GPL-2.0+ # # Given the results directories for previous KVM-based torture runs, # check the build and console output for errors. Given a directory @@ -6,23 +7,9 @@ # # Usage: kvm-recheck.sh resdir ... # -# This program is free software; you can redistribute it and/or modify -# it under the terms of the GNU General Public License as published by -# the Free Software Foundation; either version 2 of the License, or -# (at your option) any later version. -# -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -# GNU General Public License for more details. -# -# You should have received a copy of the GNU General Public License -# along with this program; if not, you can access it online at -# http://www.gnu.org/licenses/gpl-2.0.html. -# # Copyright (C) IBM Corporation, 2011 # -# Authors: Paul E. McKenney <paulmck@linux.vnet.ibm.com> +# Authors: Paul E. McKenney <paulmck@linux.ibm.com> PATH=`pwd`/tools/testing/selftests/rcutorture/bin:$PATH; export PATH . functions.sh diff --git a/tools/testing/selftests/rcutorture/bin/kvm-test-1-run.sh b/tools/testing/selftests/rcutorture/bin/kvm-test-1-run.sh index 58ca758a5786..0eb1ec16d78a 100755 --- a/tools/testing/selftests/rcutorture/bin/kvm-test-1-run.sh +++ b/tools/testing/selftests/rcutorture/bin/kvm-test-1-run.sh @@ -1,4 +1,5 @@ #!/bin/bash +# SPDX-License-Identifier: GPL-2.0+ # # Run a kvm-based test of the specified tree on the specified configs. # Fully automated run and error checking, no graphics console. @@ -20,23 +21,9 @@ # # More sophisticated argument parsing is clearly needed. # -# This program is free software; you can redistribute it and/or modify -# it under the terms of the GNU General Public License as published by -# the Free Software Foundation; either version 2 of the License, or -# (at your option) any later version. -# -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -# GNU General Public License for more details. -# -# You should have received a copy of the GNU General Public License -# along with this program; if not, you can access it online at -# http://www.gnu.org/licenses/gpl-2.0.html. -# # Copyright (C) IBM Corporation, 2011 # -# Authors: Paul E. McKenney <paulmck@linux.vnet.ibm.com> +# Authors: Paul E. McKenney <paulmck@linux.ibm.com> T=${TMPDIR-/tmp}/kvm-test-1-run.sh.$$ trap 'rm -rf $T' 0 diff --git a/tools/testing/selftests/rcutorture/bin/kvm.sh b/tools/testing/selftests/rcutorture/bin/kvm.sh index 19864f1cb27a..8f1e337b9b54 100755 --- a/tools/testing/selftests/rcutorture/bin/kvm.sh +++ b/tools/testing/selftests/rcutorture/bin/kvm.sh @@ -1,4 +1,5 @@ #!/bin/bash +# SPDX-License-Identifier: GPL-2.0+ # # Run a series of tests under KVM. By default, this series is specified # by the relevant CFLIST file, but can be overridden by the --configs @@ -6,23 +7,9 @@ # # Usage: kvm.sh [ options ] # -# This program is free software; you can redistribute it and/or modify -# it under the terms of the GNU General Public License as published by -# the Free Software Foundation; either version 2 of the License, or -# (at your option) any later version. -# -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -# GNU General Public License for more details. -# -# You should have received a copy of the GNU General Public License -# along with this program; if not, you can access it online at -# http://www.gnu.org/licenses/gpl-2.0.html. -# # Copyright (C) IBM Corporation, 2011 # -# Authors: Paul E. McKenney <paulmck@linux.vnet.ibm.com> +# Authors: Paul E. McKenney <paulmck@linux.ibm.com> scriptname=$0 args="$*" diff --git a/tools/testing/selftests/rcutorture/bin/mkinitrd.sh b/tools/testing/selftests/rcutorture/bin/mkinitrd.sh index 83552bb007b4..6fa9bd1ddc09 100755 --- a/tools/testing/selftests/rcutorture/bin/mkinitrd.sh +++ b/tools/testing/selftests/rcutorture/bin/mkinitrd.sh @@ -1,21 +1,8 @@ #!/bin/bash +# SPDX-License-Identifier: GPL-2.0+ # # Create an initrd directory if one does not already exist. # -# This program is free software; you can redistribute it and/or modify -# it under the terms of the GNU General Public License as published by -# the Free Software Foundation; either version 2 of the License, or -# (at your option) any later version. -# -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -# GNU General Public License for more details. -# -# You should have received a copy of the GNU General Public License -# along with this program; if not, you can access it online at -# http://www.gnu.org/licenses/gpl-2.0.html. -# # Copyright (C) IBM Corporation, 2013 # # Author: Connor Shu <Connor.Shu@ibm.com> diff --git a/tools/testing/selftests/rcutorture/bin/parse-build.sh b/tools/testing/selftests/rcutorture/bin/parse-build.sh index 24fe5f822b28..0701b3bf6ade 100755 --- a/tools/testing/selftests/rcutorture/bin/parse-build.sh +++ b/tools/testing/selftests/rcutorture/bin/parse-build.sh @@ -1,4 +1,5 @@ #!/bin/bash +# SPDX-License-Identifier: GPL-2.0+ # # Check the build output from an rcutorture run for goodness. # The "file" is a pathname on the local system, and "title" is @@ -8,23 +9,9 @@ # # Usage: parse-build.sh file title # -# This program is free software; you can redistribute it and/or modify -# it under the terms of the GNU General Public License as published by -# the Free Software Foundation; either version 2 of the License, or -# (at your option) any later version. -# -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -# GNU General Public License for more details. -# -# You should have received a copy of the GNU General Public License -# along with this program; if not, you can access it online at -# http://www.gnu.org/licenses/gpl-2.0.html. -# # Copyright (C) IBM Corporation, 2011 # -# Authors: Paul E. McKenney <paulmck@linux.vnet.ibm.com> +# Authors: Paul E. McKenney <paulmck@linux.ibm.com> F=$1 title=$2 diff --git a/tools/testing/selftests/rcutorture/bin/parse-console.sh b/tools/testing/selftests/rcutorture/bin/parse-console.sh index 84933f6aed77..4508373a922f 100755 --- a/tools/testing/selftests/rcutorture/bin/parse-console.sh +++ b/tools/testing/selftests/rcutorture/bin/parse-console.sh @@ -1,4 +1,5 @@ #!/bin/bash +# SPDX-License-Identifier: GPL-2.0+ # # Check the console output from an rcutorture run for oopses. # The "file" is a pathname on the local system, and "title" is @@ -6,23 +7,9 @@ # # Usage: parse-console.sh file title # -# This program is free software; you can redistribute it and/or modify -# it under the terms of the GNU General Public License as published by -# the Free Software Foundation; either version 2 of the License, or -# (at your option) any later version. -# -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -# GNU General Public License for more details. -# -# You should have received a copy of the GNU General Public License -# along with this program; if not, you can access it online at -# http://www.gnu.org/licenses/gpl-2.0.html. -# # Copyright (C) IBM Corporation, 2011 # -# Authors: Paul E. McKenney <paulmck@linux.vnet.ibm.com> +# Authors: Paul E. McKenney <paulmck@linux.ibm.com> T=${TMPDIR-/tmp}/parse-console.sh.$$ file="$1" diff --git a/tools/testing/selftests/rcutorture/configs/lock/ver_functions.sh b/tools/testing/selftests/rcutorture/configs/lock/ver_functions.sh index 80eb646e1319..d3e4b2971f92 100644 --- a/tools/testing/selftests/rcutorture/configs/lock/ver_functions.sh +++ b/tools/testing/selftests/rcutorture/configs/lock/ver_functions.sh @@ -1,24 +1,11 @@ #!/bin/bash +# SPDX-License-Identifier: GPL-2.0+ # # Kernel-version-dependent shell functions for the rest of the scripts. # -# This program is free software; you can redistribute it and/or modify -# it under the terms of the GNU General Public License as published by -# the Free Software Foundation; either version 2 of the License, or -# (at your option) any later version. -# -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -# GNU General Public License for more details. -# -# You should have received a copy of the GNU General Public License -# along with this program; if not, you can access it online at -# http://www.gnu.org/licenses/gpl-2.0.html. -# # Copyright (C) IBM Corporation, 2014 # -# Authors: Paul E. McKenney <paulmck@linux.vnet.ibm.com> +# Authors: Paul E. McKenney <paulmck@linux.ibm.com> # locktorture_param_onoff bootparam-string config-file # diff --git a/tools/testing/selftests/rcutorture/configs/rcu/ver_functions.sh b/tools/testing/selftests/rcutorture/configs/rcu/ver_functions.sh index 7bab8246392b..effa415f9b92 100644 --- a/tools/testing/selftests/rcutorture/configs/rcu/ver_functions.sh +++ b/tools/testing/selftests/rcutorture/configs/rcu/ver_functions.sh @@ -1,24 +1,11 @@ #!/bin/bash +# SPDX-License-Identifier: GPL-2.0+ # # Kernel-version-dependent shell functions for the rest of the scripts. # -# This program is free software; you can redistribute it and/or modify -# it under the terms of the GNU General Public License as published by -# the Free Software Foundation; either version 2 of the License, or -# (at your option) any later version. -# -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -# GNU General Public License for more details. -# -# You should have received a copy of the GNU General Public License -# along with this program; if not, you can access it online at -# http://www.gnu.org/licenses/gpl-2.0.html. -# # Copyright (C) IBM Corporation, 2013 # -# Authors: Paul E. McKenney <paulmck@linux.vnet.ibm.com> +# Authors: Paul E. McKenney <paulmck@linux.ibm.com> # rcutorture_param_n_barrier_cbs bootparam-string # diff --git a/tools/testing/selftests/rcutorture/configs/rcuperf/ver_functions.sh b/tools/testing/selftests/rcutorture/configs/rcuperf/ver_functions.sh index d36b8fd6f0fc..777d5b0c190f 100644 --- a/tools/testing/selftests/rcutorture/configs/rcuperf/ver_functions.sh +++ b/tools/testing/selftests/rcutorture/configs/rcuperf/ver_functions.sh @@ -1,24 +1,11 @@ #!/bin/bash +# SPDX-License-Identifier: GPL-2.0+ # # Torture-suite-dependent shell functions for the rest of the scripts. # -# This program is free software; you can redistribute it and/or modify -# it under the terms of the GNU General Public License as published by -# the Free Software Foundation; either version 2 of the License, or -# (at your option) any later version. -# -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -# GNU General Public License for more details. -# -# You should have received a copy of the GNU General Public License -# along with this program; if not, you can access it online at -# http://www.gnu.org/licenses/gpl-2.0.html. -# # Copyright (C) IBM Corporation, 2015 # -# Authors: Paul E. McKenney <paulmck@linux.vnet.ibm.com> +# Authors: Paul E. McKenney <paulmck@linux.ibm.com> # per_version_boot_params bootparam-string config-file seconds # diff --git a/tools/testing/selftests/seccomp/seccomp_bpf.c b/tools/testing/selftests/seccomp/seccomp_bpf.c index f69d2ee29742..5019cdae5d0b 100644 --- a/tools/testing/selftests/seccomp/seccomp_bpf.c +++ b/tools/testing/selftests/seccomp/seccomp_bpf.c @@ -2166,11 +2166,14 @@ TEST(detect_seccomp_filter_flags) SECCOMP_FILTER_FLAG_LOG, SECCOMP_FILTER_FLAG_SPEC_ALLOW, SECCOMP_FILTER_FLAG_NEW_LISTENER }; - unsigned int flag, all_flags; + unsigned int exclusive[] = { + SECCOMP_FILTER_FLAG_TSYNC, + SECCOMP_FILTER_FLAG_NEW_LISTENER }; + unsigned int flag, all_flags, exclusive_mask; int i; long ret; - /* Test detection of known-good filter flags */ + /* Test detection of individual known-good filter flags */ for (i = 0, all_flags = 0; i < ARRAY_SIZE(flags); i++) { int bits = 0; @@ -2197,16 +2200,29 @@ TEST(detect_seccomp_filter_flags) all_flags |= flag; } - /* Test detection of all known-good filter flags */ - ret = seccomp(SECCOMP_SET_MODE_FILTER, all_flags, NULL); - EXPECT_EQ(-1, ret); - EXPECT_EQ(EFAULT, errno) { - TH_LOG("Failed to detect that all known-good filter flags (0x%X) are supported!", - all_flags); + /* + * Test detection of all known-good filter flags combined. But + * for the exclusive flags we need to mask them out and try them + * individually for the "all flags" testing. + */ + exclusive_mask = 0; + for (i = 0; i < ARRAY_SIZE(exclusive); i++) + exclusive_mask |= exclusive[i]; + for (i = 0; i < ARRAY_SIZE(exclusive); i++) { + flag = all_flags & ~exclusive_mask; + flag |= exclusive[i]; + + ret = seccomp(SECCOMP_SET_MODE_FILTER, flag, NULL); + EXPECT_EQ(-1, ret); + EXPECT_EQ(EFAULT, errno) { + TH_LOG("Failed to detect that all known-good filter flags (0x%X) are supported!", + flag); + } } - /* Test detection of an unknown filter flag */ + /* Test detection of an unknown filter flags, without exclusives. */ flag = -1; + flag &= ~exclusive_mask; ret = seccomp(SECCOMP_SET_MODE_FILTER, flag, NULL); EXPECT_EQ(-1, ret); EXPECT_EQ(EINVAL, errno) { diff --git a/tools/testing/selftests/tc-testing/tc-tests/actions/sample.json b/tools/testing/selftests/tc-testing/tc-tests/actions/sample.json index 27f0acaed880..ddabb160a11b 100644 --- a/tools/testing/selftests/tc-testing/tc-tests/actions/sample.json +++ b/tools/testing/selftests/tc-testing/tc-tests/actions/sample.json @@ -144,6 +144,30 @@ ] }, { + "id": "7571", + "name": "Add sample action with invalid rate", + "category": [ + "actions", + "sample" + ], + "setup": [ + [ + "$TC actions flush action sample", + 0, + 1, + 255 + ] + ], + "cmdUnderTest": "$TC actions add action sample rate 0 group 1 index 2", + "expExitCode": "255", + "verifyCmd": "$TC actions get action sample index 2", + "matchPattern": "action order [0-9]+: sample rate 1/0 group 1.*index 2 ref", + "matchCount": "0", + "teardown": [ + "$TC actions flush action sample" + ] + }, + { "id": "b6d4", "name": "Add sample action with mandatory arguments and invalid control action", "category": [ diff --git a/tools/testing/selftests/tc-testing/tc-tests/filters/tests.json b/tools/testing/selftests/tc-testing/tc-tests/filters/tests.json index 99a5ffca1088..2d096b2abf2c 100644 --- a/tools/testing/selftests/tc-testing/tc-tests/filters/tests.json +++ b/tools/testing/selftests/tc-testing/tc-tests/filters/tests.json @@ -19,6 +19,26 @@ ] }, { + "id": "2638", + "name": "Add matchall and try to get it", + "category": [ + "filter", + "matchall" + ], + "setup": [ + "$TC qdisc add dev $DEV1 clsact", + "$TC filter add dev $DEV1 protocol all pref 1 ingress handle 0x1234 matchall action ok" + ], + "cmdUnderTest": "$TC filter get dev $DEV1 protocol all pref 1 ingress handle 0x1234 matchall", + "expExitCode": "0", + "verifyCmd": "$TC filter show dev $DEV1 ingress", + "matchPattern": "filter protocol all pref 1 matchall chain 0 handle 0x1234", + "matchCount": "1", + "teardown": [ + "$TC qdisc del dev $DEV1 clsact" + ] + }, + { "id": "d052", "name": "Add 1M filters with the same action", "category": [ diff --git a/tools/testing/selftests/tpm2/tpm2.py b/tools/testing/selftests/tpm2/tpm2.py index 40ea95ce2ead..828c18584624 100644 --- a/tools/testing/selftests/tpm2/tpm2.py +++ b/tools/testing/selftests/tpm2/tpm2.py @@ -22,6 +22,7 @@ TPM2_CC_UNSEAL = 0x015E TPM2_CC_FLUSH_CONTEXT = 0x0165 TPM2_CC_START_AUTH_SESSION = 0x0176 TPM2_CC_GET_CAPABILITY = 0x017A +TPM2_CC_GET_RANDOM = 0x017B TPM2_CC_PCR_READ = 0x017E TPM2_CC_POLICY_PCR = 0x017F TPM2_CC_PCR_EXTEND = 0x0182 @@ -357,9 +358,9 @@ class Client: self.flags = flags if (self.flags & Client.FLAG_SPACE) == 0: - self.tpm = open('/dev/tpm0', 'r+b') + self.tpm = open('/dev/tpm0', 'r+b', buffering=0) else: - self.tpm = open('/dev/tpmrm0', 'r+b') + self.tpm = open('/dev/tpmrm0', 'r+b', buffering=0) def close(self): self.tpm.close() diff --git a/tools/testing/selftests/tpm2/tpm2_tests.py b/tools/testing/selftests/tpm2/tpm2_tests.py index 3bb066fea4a0..d4973be53493 100644 --- a/tools/testing/selftests/tpm2/tpm2_tests.py +++ b/tools/testing/selftests/tpm2/tpm2_tests.py @@ -158,6 +158,69 @@ class SmokeTest(unittest.TestCase): pass self.assertEqual(rejected, True) + def test_read_partial_resp(self): + try: + fmt = '>HIIH' + cmd = struct.pack(fmt, + tpm2.TPM2_ST_NO_SESSIONS, + struct.calcsize(fmt), + tpm2.TPM2_CC_GET_RANDOM, + 0x20) + self.client.tpm.write(cmd) + hdr = self.client.tpm.read(10) + sz = struct.unpack('>I', hdr[2:6])[0] + rsp = self.client.tpm.read() + except: + pass + self.assertEqual(sz, 10 + 2 + 32) + self.assertEqual(len(rsp), 2 + 32) + + def test_read_partial_overwrite(self): + try: + fmt = '>HIIH' + cmd = struct.pack(fmt, + tpm2.TPM2_ST_NO_SESSIONS, + struct.calcsize(fmt), + tpm2.TPM2_CC_GET_RANDOM, + 0x20) + self.client.tpm.write(cmd) + # Read part of the respone + rsp1 = self.client.tpm.read(15) + + # Send a new cmd + self.client.tpm.write(cmd) + + # Read the whole respone + rsp2 = self.client.tpm.read() + except: + pass + self.assertEqual(len(rsp1), 15) + self.assertEqual(len(rsp2), 10 + 2 + 32) + + def test_send_two_cmds(self): + rejected = False + try: + fmt = '>HIIH' + cmd = struct.pack(fmt, + tpm2.TPM2_ST_NO_SESSIONS, + struct.calcsize(fmt), + tpm2.TPM2_CC_GET_RANDOM, + 0x20) + self.client.tpm.write(cmd) + + # expect the second one to raise -EBUSY error + self.client.tpm.write(cmd) + rsp = self.client.tpm.read() + + except IOError, e: + # read the response + rsp = self.client.tpm.read() + rejected = True + pass + except: + pass + self.assertEqual(rejected, True) + class SpaceTest(unittest.TestCase): def setUp(self): logging.basicConfig(filename='SpaceTest.log', level=logging.DEBUG) |