diff options
Diffstat (limited to 'tools/testing/selftests')
-rw-r--r-- | tools/testing/selftests/bpf/Makefile | 3 | ||||
-rwxr-xr-x | tools/testing/selftests/bpf/test_xdp_vlan.sh | 57 | ||||
-rwxr-xr-x | tools/testing/selftests/bpf/test_xdp_vlan_mode_generic.sh | 9 | ||||
-rwxr-xr-x | tools/testing/selftests/bpf/test_xdp_vlan_mode_native.sh | 9 | ||||
-rw-r--r-- | tools/testing/selftests/cgroup/cgroup_util.c | 3 | ||||
-rwxr-xr-x | tools/testing/selftests/drivers/net/mlxsw/qos_mc_aware.sh | 4 | ||||
-rwxr-xr-x | tools/testing/selftests/kmod/kmod.sh | 6 | ||||
-rw-r--r-- | tools/testing/selftests/kselftest.h | 15 | ||||
-rw-r--r-- | tools/testing/selftests/livepatch/functions.sh | 46 | ||||
-rw-r--r-- | tools/testing/selftests/net/tls.c | 47 | ||||
-rw-r--r-- | tools/testing/selftests/pidfd/pidfd_test.c | 6 | ||||
-rw-r--r-- | tools/testing/selftests/tc-testing/tc-tests/actions/skbedit.json | 47 | ||||
-rw-r--r-- | tools/testing/selftests/tc-testing/tc-tests/actions/vlan.json | 94 | ||||
-rw-r--r-- | tools/testing/selftests/x86/test_vsyscall.c | 2 |
14 files changed, 307 insertions, 41 deletions
diff --git a/tools/testing/selftests/bpf/Makefile b/tools/testing/selftests/bpf/Makefile index 11c9c62c3362..c085964e1d05 100644 --- a/tools/testing/selftests/bpf/Makefile +++ b/tools/testing/selftests/bpf/Makefile @@ -57,7 +57,8 @@ TEST_PROGS := test_kmod.sh \ test_lirc_mode2.sh \ test_skb_cgroup_id.sh \ test_flow_dissector.sh \ - test_xdp_vlan.sh \ + test_xdp_vlan_mode_generic.sh \ + test_xdp_vlan_mode_native.sh \ test_lwt_ip_encap.sh \ test_tcp_check_syncookie.sh \ test_tc_tunnel.sh \ diff --git a/tools/testing/selftests/bpf/test_xdp_vlan.sh b/tools/testing/selftests/bpf/test_xdp_vlan.sh index 51a3a31d1aac..bb8b0da91686 100755 --- a/tools/testing/selftests/bpf/test_xdp_vlan.sh +++ b/tools/testing/selftests/bpf/test_xdp_vlan.sh @@ -1,6 +1,14 @@ #!/bin/bash +# SPDX-License-Identifier: GPL-2.0 +# Author: Jesper Dangaard Brouer <hawk@kernel.org> -TESTNAME=xdp_vlan +# Allow wrapper scripts to name test +if [ -z "$TESTNAME" ]; then + TESTNAME=xdp_vlan +fi + +# Default XDP mode +XDP_MODE=xdpgeneric usage() { echo "Testing XDP + TC eBPF VLAN manipulations: $TESTNAME" @@ -9,9 +17,23 @@ usage() { echo " -v | --verbose : Verbose" echo " --flush : Flush before starting (e.g. after --interactive)" echo " --interactive : Keep netns setup running after test-run" + echo " --mode=XXX : Choose XDP mode (xdp | xdpgeneric | xdpdrv)" echo "" } +valid_xdp_mode() +{ + local mode=$1 + + case "$mode" in + xdpgeneric | xdpdrv | xdp) + return 0 + ;; + *) + return 1 + esac +} + cleanup() { local status=$? @@ -37,7 +59,7 @@ cleanup() # Using external program "getopt" to get --long-options OPTIONS=$(getopt -o hvfi: \ - --long verbose,flush,help,interactive,debug -- "$@") + --long verbose,flush,help,interactive,debug,mode: -- "$@") if (( $? != 0 )); then usage echo "selftests: $TESTNAME [FAILED] Error calling getopt, unknown option?" @@ -60,6 +82,11 @@ while true; do cleanup shift ;; + --mode ) + shift + XDP_MODE=$1 + shift + ;; -- ) shift break @@ -81,8 +108,14 @@ if [ "$EUID" -ne 0 ]; then exit 1 fi -ip link set dev lo xdp off 2>/dev/null > /dev/null -if [ $? -ne 0 ];then +valid_xdp_mode $XDP_MODE +if [ $? -ne 0 ]; then + echo "selftests: $TESTNAME [FAILED] unknown XDP mode ($XDP_MODE)" + exit 1 +fi + +ip link set dev lo xdpgeneric off 2>/dev/null > /dev/null +if [ $? -ne 0 ]; then echo "selftests: $TESTNAME [SKIP] need ip xdp support" exit 0 fi @@ -155,7 +188,7 @@ ip netns exec ns2 ip link set lo up # At this point, the hosts cannot reach each-other, # because ns2 are using VLAN tags on the packets. -ip netns exec ns2 sh -c 'ping -W 1 -c 1 100.64.41.1 || echo "Okay ping fails"' +ip netns exec ns2 sh -c 'ping -W 1 -c 1 100.64.41.1 || echo "Success: First ping must fail"' # Now we can use the test_xdp_vlan.c program to pop/push these VLAN tags @@ -166,7 +199,7 @@ export FILE=test_xdp_vlan.o # First test: Remove VLAN by setting VLAN ID 0, using "xdp_vlan_change" export XDP_PROG=xdp_vlan_change -ip netns exec ns1 ip link set $DEVNS1 xdp object $FILE section $XDP_PROG +ip netns exec ns1 ip link set $DEVNS1 $XDP_MODE object $FILE section $XDP_PROG # In ns1: egress use TC to add back VLAN tag 4011 # (del cmd) @@ -177,8 +210,8 @@ ip netns exec ns1 tc filter add dev $DEVNS1 egress \ prio 1 handle 1 bpf da obj $FILE sec tc_vlan_push # Now the namespaces can reach each-other, test with ping: -ip netns exec ns2 ping -W 2 -c 3 $IPADDR1 -ip netns exec ns1 ping -W 2 -c 3 $IPADDR2 +ip netns exec ns2 ping -i 0.2 -W 2 -c 2 $IPADDR1 +ip netns exec ns1 ping -i 0.2 -W 2 -c 2 $IPADDR2 # Second test: Replace xdp prog, that fully remove vlan header # @@ -187,9 +220,9 @@ ip netns exec ns1 ping -W 2 -c 3 $IPADDR2 # ETH_P_8021Q indication, and this cause overwriting of our changes. # export XDP_PROG=xdp_vlan_remove_outer2 -ip netns exec ns1 ip link set $DEVNS1 xdp off -ip netns exec ns1 ip link set $DEVNS1 xdp object $FILE section $XDP_PROG +ip netns exec ns1 ip link set $DEVNS1 $XDP_MODE off +ip netns exec ns1 ip link set $DEVNS1 $XDP_MODE object $FILE section $XDP_PROG # Now the namespaces should still be able reach each-other, test with ping: -ip netns exec ns2 ping -W 2 -c 3 $IPADDR1 -ip netns exec ns1 ping -W 2 -c 3 $IPADDR2 +ip netns exec ns2 ping -i 0.2 -W 2 -c 2 $IPADDR1 +ip netns exec ns1 ping -i 0.2 -W 2 -c 2 $IPADDR2 diff --git a/tools/testing/selftests/bpf/test_xdp_vlan_mode_generic.sh b/tools/testing/selftests/bpf/test_xdp_vlan_mode_generic.sh new file mode 100755 index 000000000000..c515326d6d59 --- /dev/null +++ b/tools/testing/selftests/bpf/test_xdp_vlan_mode_generic.sh @@ -0,0 +1,9 @@ +#!/bin/bash +# SPDX-License-Identifier: GPL-2.0 + +# Exit on failure +set -e + +# Wrapper script to test generic-XDP +export TESTNAME=xdp_vlan_mode_generic +./test_xdp_vlan.sh --mode=xdpgeneric diff --git a/tools/testing/selftests/bpf/test_xdp_vlan_mode_native.sh b/tools/testing/selftests/bpf/test_xdp_vlan_mode_native.sh new file mode 100755 index 000000000000..5cf7ce1f16c1 --- /dev/null +++ b/tools/testing/selftests/bpf/test_xdp_vlan_mode_native.sh @@ -0,0 +1,9 @@ +#!/bin/bash +# SPDX-License-Identifier: GPL-2.0 + +# Exit on failure +set -e + +# Wrapper script to test native-XDP +export TESTNAME=xdp_vlan_mode_native +./test_xdp_vlan.sh --mode=xdpdrv diff --git a/tools/testing/selftests/cgroup/cgroup_util.c b/tools/testing/selftests/cgroup/cgroup_util.c index 4c223266299a..bdb69599c4bd 100644 --- a/tools/testing/selftests/cgroup/cgroup_util.c +++ b/tools/testing/selftests/cgroup/cgroup_util.c @@ -191,8 +191,7 @@ int cg_find_unified_root(char *root, size_t len) strtok(NULL, delim); strtok(NULL, delim); - if (strcmp(fs, "cgroup") == 0 && - strcmp(type, "cgroup2") == 0) { + if (strcmp(type, "cgroup2") == 0) { strncpy(root, mount, len); return 0; } diff --git a/tools/testing/selftests/drivers/net/mlxsw/qos_mc_aware.sh b/tools/testing/selftests/drivers/net/mlxsw/qos_mc_aware.sh index 71231ad2dbfb..47315fe48d5a 100755 --- a/tools/testing/selftests/drivers/net/mlxsw/qos_mc_aware.sh +++ b/tools/testing/selftests/drivers/net/mlxsw/qos_mc_aware.sh @@ -262,7 +262,7 @@ test_mc_aware() stop_traffic - log_test "UC performace under MC overload" + log_test "UC performance under MC overload" echo "UC-only throughput $(humanize $ucth1)" echo "UC+MC throughput $(humanize $ucth2)" @@ -316,7 +316,7 @@ test_uc_aware() stop_traffic - log_test "MC performace under UC overload" + log_test "MC performance under UC overload" echo " ingress UC throughput $(humanize ${uc_ir})" echo " egress UC throughput $(humanize ${uc_er})" echo " sent $attempts BC ARPs, got $passes responses" diff --git a/tools/testing/selftests/kmod/kmod.sh b/tools/testing/selftests/kmod/kmod.sh index 0a76314b4414..8b944cf042f6 100755 --- a/tools/testing/selftests/kmod/kmod.sh +++ b/tools/testing/selftests/kmod/kmod.sh @@ -28,7 +28,7 @@ # override by exporting to your environment prior running this script. # For instance this script assumes you do not have xfs loaded upon boot. # If this is false, export DEFAULT_KMOD_FS="ext4" prior to running this -# script if the filesyste module you don't have loaded upon bootup +# script if the filesystem module you don't have loaded upon bootup # is ext4 instead. Refer to allow_user_defaults() for a list of user # override variables possible. # @@ -263,7 +263,7 @@ config_get_test_result() config_reset() { if ! echo -n "1" >"$DIR"/reset; then - echo "$0: reset shuld have worked" >&2 + echo "$0: reset should have worked" >&2 exit 1 fi } @@ -488,7 +488,7 @@ usage() echo Example uses: echo echo "${TEST_NAME}.sh -- executes all tests" - echo "${TEST_NAME}.sh -t 0008 -- Executes test ID 0008 number of times is recomended" + echo "${TEST_NAME}.sh -t 0008 -- Executes test ID 0008 number of times is recommended" echo "${TEST_NAME}.sh -w 0008 -- Watch test ID 0008 run until an error occurs" echo "${TEST_NAME}.sh -s 0008 -- Run test ID 0008 once" echo "${TEST_NAME}.sh -c 0008 3 -- Run test ID 0008 three times" diff --git a/tools/testing/selftests/kselftest.h b/tools/testing/selftests/kselftest.h index ec15c4f6af55..0ac49d91a260 100644 --- a/tools/testing/selftests/kselftest.h +++ b/tools/testing/selftests/kselftest.h @@ -10,6 +10,7 @@ #ifndef __KSELFTEST_H #define __KSELFTEST_H +#include <errno.h> #include <stdlib.h> #include <unistd.h> #include <stdarg.h> @@ -81,58 +82,68 @@ static inline void ksft_print_cnts(void) static inline void ksft_print_msg(const char *msg, ...) { + int saved_errno = errno; va_list args; va_start(args, msg); printf("# "); + errno = saved_errno; vprintf(msg, args); va_end(args); } static inline void ksft_test_result_pass(const char *msg, ...) { + int saved_errno = errno; va_list args; ksft_cnt.ksft_pass++; va_start(args, msg); printf("ok %d ", ksft_test_num()); + errno = saved_errno; vprintf(msg, args); va_end(args); } static inline void ksft_test_result_fail(const char *msg, ...) { + int saved_errno = errno; va_list args; ksft_cnt.ksft_fail++; va_start(args, msg); printf("not ok %d ", ksft_test_num()); + errno = saved_errno; vprintf(msg, args); va_end(args); } static inline void ksft_test_result_skip(const char *msg, ...) { + int saved_errno = errno; va_list args; ksft_cnt.ksft_xskip++; va_start(args, msg); printf("not ok %d # SKIP ", ksft_test_num()); + errno = saved_errno; vprintf(msg, args); va_end(args); } static inline void ksft_test_result_error(const char *msg, ...) { + int saved_errno = errno; va_list args; ksft_cnt.ksft_error++; va_start(args, msg); printf("not ok %d # error ", ksft_test_num()); + errno = saved_errno; vprintf(msg, args); va_end(args); } @@ -152,10 +163,12 @@ static inline int ksft_exit_fail(void) static inline int ksft_exit_fail_msg(const char *msg, ...) { + int saved_errno = errno; va_list args; va_start(args, msg); printf("Bail out! "); + errno = saved_errno; vprintf(msg, args); va_end(args); @@ -178,10 +191,12 @@ static inline int ksft_exit_xpass(void) static inline int ksft_exit_skip(const char *msg, ...) { if (msg) { + int saved_errno = errno; va_list args; va_start(args, msg); printf("not ok %d # SKIP ", 1 + ksft_test_num()); + errno = saved_errno; vprintf(msg, args); va_end(args); } else { diff --git a/tools/testing/selftests/livepatch/functions.sh b/tools/testing/selftests/livepatch/functions.sh index 30195449c63c..79b0affd21fb 100644 --- a/tools/testing/selftests/livepatch/functions.sh +++ b/tools/testing/selftests/livepatch/functions.sh @@ -13,6 +13,14 @@ function log() { echo "$1" > /dev/kmsg } +# skip(msg) - testing can't proceed +# msg - explanation +function skip() { + log "SKIP: $1" + echo "SKIP: $1" >&2 + exit 4 +} + # die(msg) - game over, man # msg - dying words function die() { @@ -21,13 +29,27 @@ function die() { exit 1 } -# set_dynamic_debug() - setup kernel dynamic debug -# TODO - push and pop this config? +function push_dynamic_debug() { + DYNAMIC_DEBUG=$(grep '^kernel/livepatch' /sys/kernel/debug/dynamic_debug/control | \ + awk -F'[: ]' '{print "file " $1 " line " $2 " " $4}') +} + +function pop_dynamic_debug() { + if [[ -n "$DYNAMIC_DEBUG" ]]; then + echo -n "$DYNAMIC_DEBUG" > /sys/kernel/debug/dynamic_debug/control + fi +} + +# set_dynamic_debug() - save the current dynamic debug config and tweak +# it for the self-tests. Set a script exit trap +# that restores the original config. function set_dynamic_debug() { - cat << EOF > /sys/kernel/debug/dynamic_debug/control -file kernel/livepatch/* +p -func klp_try_switch_task -p -EOF + push_dynamic_debug + trap pop_dynamic_debug EXIT INT TERM HUP + cat <<-EOF > /sys/kernel/debug/dynamic_debug/control + file kernel/livepatch/* +p + func klp_try_switch_task -p + EOF } # loop_until(cmd) - loop a command until it is successful or $MAX_RETRIES, @@ -43,6 +65,12 @@ function loop_until() { done } +function assert_mod() { + local mod="$1" + + modprobe --dry-run "$mod" &>/dev/null +} + function is_livepatch_mod() { local mod="$1" @@ -75,6 +103,9 @@ function __load_mod() { function load_mod() { local mod="$1"; shift + assert_mod "$mod" || + skip "unable to load module ${mod}, verify CONFIG_TEST_LIVEPATCH=m and run self-tests as root" + is_livepatch_mod "$mod" && die "use load_lp() to load the livepatch module $mod" @@ -88,6 +119,9 @@ function load_mod() { function load_lp_nowait() { local mod="$1"; shift + assert_mod "$mod" || + skip "unable to load module ${mod}, verify CONFIG_TEST_LIVEPATCH=m and run self-tests as root" + is_livepatch_mod "$mod" || die "module $mod is not a livepatch" diff --git a/tools/testing/selftests/net/tls.c b/tools/testing/selftests/net/tls.c index 630c5b884d43..4c285b6e1db8 100644 --- a/tools/testing/selftests/net/tls.c +++ b/tools/testing/selftests/net/tls.c @@ -69,7 +69,7 @@ FIXTURE_SETUP(tls_basic) ret = setsockopt(self->fd, IPPROTO_TCP, TCP_ULP, "tls", sizeof("tls")); if (ret != 0) { - ASSERT_EQ(errno, ENOTSUPP); + ASSERT_EQ(errno, ENOENT); self->notls = true; printf("Failure setting TCP_ULP, testing without tls\n"); return; @@ -696,21 +696,26 @@ TEST_F(tls, recv_lowat) TEST_F(tls, bidir) { - struct tls12_crypto_info_aes_gcm_128 tls12; char const *test_str = "test_read"; int send_len = 10; char buf[10]; int ret; - memset(&tls12, 0, sizeof(tls12)); - tls12.info.version = TLS_1_3_VERSION; - tls12.info.cipher_type = TLS_CIPHER_AES_GCM_128; + if (!self->notls) { + struct tls12_crypto_info_aes_gcm_128 tls12; - ret = setsockopt(self->fd, SOL_TLS, TLS_RX, &tls12, sizeof(tls12)); - ASSERT_EQ(ret, 0); + memset(&tls12, 0, sizeof(tls12)); + tls12.info.version = TLS_1_3_VERSION; + tls12.info.cipher_type = TLS_CIPHER_AES_GCM_128; - ret = setsockopt(self->cfd, SOL_TLS, TLS_TX, &tls12, sizeof(tls12)); - ASSERT_EQ(ret, 0); + ret = setsockopt(self->fd, SOL_TLS, TLS_RX, &tls12, + sizeof(tls12)); + ASSERT_EQ(ret, 0); + + ret = setsockopt(self->cfd, SOL_TLS, TLS_TX, &tls12, + sizeof(tls12)); + ASSERT_EQ(ret, 0); + } ASSERT_EQ(strlen(test_str) + 1, send_len); @@ -979,6 +984,30 @@ TEST_F(tls, shutdown_unsent) shutdown(self->cfd, SHUT_RDWR); } +TEST_F(tls, shutdown_reuse) +{ + struct sockaddr_in addr; + int ret; + + shutdown(self->fd, SHUT_RDWR); + shutdown(self->cfd, SHUT_RDWR); + close(self->cfd); + + addr.sin_family = AF_INET; + addr.sin_addr.s_addr = htonl(INADDR_ANY); + addr.sin_port = 0; + + ret = bind(self->fd, &addr, sizeof(addr)); + EXPECT_EQ(ret, 0); + ret = listen(self->fd, 10); + EXPECT_EQ(ret, -1); + EXPECT_EQ(errno, EINVAL); + + ret = connect(self->fd, &addr, sizeof(addr)); + EXPECT_EQ(ret, -1); + EXPECT_EQ(errno, EISCONN); +} + TEST(non_established) { struct tls12_crypto_info_aes_gcm_256 tls12; struct sockaddr_in addr; diff --git a/tools/testing/selftests/pidfd/pidfd_test.c b/tools/testing/selftests/pidfd/pidfd_test.c index 7eaa8a3de262..b632965e60eb 100644 --- a/tools/testing/selftests/pidfd/pidfd_test.c +++ b/tools/testing/selftests/pidfd/pidfd_test.c @@ -339,13 +339,9 @@ static int test_pidfd_send_signal_syscall_support(void) ret = sys_pidfd_send_signal(pidfd, 0, NULL, 0); if (ret < 0) { - /* - * pidfd_send_signal() will currently return ENOSYS when - * CONFIG_PROC_FS is not set. - */ if (errno == ENOSYS) ksft_exit_skip( - "%s test: pidfd_send_signal() syscall not supported (Ensure that CONFIG_PROC_FS=y is set)\n", + "%s test: pidfd_send_signal() syscall not supported\n", test_name); ksft_exit_fail_msg("%s test: Failed to send signal\n", diff --git a/tools/testing/selftests/tc-testing/tc-tests/actions/skbedit.json b/tools/testing/selftests/tc-testing/tc-tests/actions/skbedit.json index bf5ebf59c2d4..9cdd2e31ac2c 100644 --- a/tools/testing/selftests/tc-testing/tc-tests/actions/skbedit.json +++ b/tools/testing/selftests/tc-testing/tc-tests/actions/skbedit.json @@ -670,5 +670,52 @@ "teardown": [ "$TC actions flush action skbedit" ] + }, + { + "id": "630c", + "name": "Add batch of 32 skbedit actions with all parameters and cookie", + "category": [ + "actions", + "skbedit" + ], + "setup": [ + [ + "$TC actions flush action skbedit", + 0, + 1, + 255 + ] + ], + "cmdUnderTest": "bash -c \"for i in \\`seq 1 32\\`; do cmd=\\\"action skbedit queue_mapping 2 priority 10 mark 7/0xaabbccdd ptype host inheritdsfield index \\$i cookie aabbccddeeff112233445566778800a1 \\\"; args=\"\\$args\\$cmd\"; done && $TC actions add \\$args\"", + "expExitCode": "0", + "verifyCmd": "$TC actions list action skbedit", + "matchPattern": "^[ \t]+index [0-9]+ ref", + "matchCount": "32", + "teardown": [ + "$TC actions flush action skbedit" + ] + }, + { + "id": "706d", + "name": "Delete batch of 32 skbedit actions with all parameters", + "category": [ + "actions", + "skbedit" + ], + "setup": [ + [ + "$TC actions flush action skbedit", + 0, + 1, + 255 + ], + "bash -c \"for i in \\`seq 1 32\\`; do cmd=\\\"action skbedit queue_mapping 2 priority 10 mark 7/0xaabbccdd ptype host inheritdsfield index \\$i \\\"; args=\\\"\\$args\\$cmd\\\"; done && $TC actions add \\$args\"" + ], + "cmdUnderTest": "bash -c \"for i in \\`seq 1 32\\`; do cmd=\\\"action skbedit index \\$i \\\"; args=\"\\$args\\$cmd\"; done && $TC actions del \\$args\"", + "expExitCode": "0", + "verifyCmd": "$TC actions list action skbedit", + "matchPattern": "^[ \t]+index [0-9]+ ref", + "matchCount": "0", + "teardown": [] } ] diff --git a/tools/testing/selftests/tc-testing/tc-tests/actions/vlan.json b/tools/testing/selftests/tc-testing/tc-tests/actions/vlan.json index cc7c7d758008..6503b1ce091f 100644 --- a/tools/testing/selftests/tc-testing/tc-tests/actions/vlan.json +++ b/tools/testing/selftests/tc-testing/tc-tests/actions/vlan.json @@ -713,5 +713,99 @@ "teardown": [ "$TC actions flush action vlan" ] + }, + { + "id": "294e", + "name": "Add batch of 32 vlan push actions with cookie", + "category": [ + "actions", + "vlan" + ], + "setup": [ + [ + "$TC actions flush action vlan", + 0, + 1, + 255 + ] + ], + "cmdUnderTest": "bash -c \"for i in \\`seq 1 32\\`; do cmd=\\\"action vlan push protocol 802.1q id 4094 priority 7 pipe index \\$i cookie aabbccddeeff112233445566778800a1 \\\"; args=\"\\$args\\$cmd\"; done && $TC actions add \\$args\"", + "expExitCode": "0", + "verifyCmd": "$TC actions list action vlan", + "matchPattern": "^[ \t]+index [0-9]+ ref", + "matchCount": "32", + "teardown": [ + "$TC actions flush action vlan" + ] + }, + { + "id": "56f7", + "name": "Delete batch of 32 vlan push actions", + "category": [ + "actions", + "vlan" + ], + "setup": [ + [ + "$TC actions flush action vlan", + 0, + 1, + 255 + ], + "bash -c \"for i in \\`seq 1 32\\`; do cmd=\\\"action vlan push protocol 802.1q id 4094 priority 7 pipe index \\$i \\\"; args=\\\"\\$args\\$cmd\\\"; done && $TC actions add \\$args\"" + ], + "cmdUnderTest": "bash -c \"for i in \\`seq 1 32\\`; do cmd=\\\"action vlan index \\$i \\\"; args=\"\\$args\\$cmd\"; done && $TC actions del \\$args\"", + "expExitCode": "0", + "verifyCmd": "$TC actions list action vlan", + "matchPattern": "^[ \t]+index [0-9]+ ref", + "matchCount": "0", + "teardown": [] + }, + { + "id": "759f", + "name": "Add batch of 32 vlan pop actions with cookie", + "category": [ + "actions", + "vlan" + ], + "setup": [ + [ + "$TC actions flush action vlan", + 0, + 1, + 255 + ] + ], + "cmdUnderTest": "bash -c \"for i in \\`seq 1 32\\`; do cmd=\\\"action vlan pop continue index \\$i cookie aabbccddeeff112233445566778800a1 \\\"; args=\"\\$args\\$cmd\"; done && $TC actions add \\$args\"", + "expExitCode": "0", + "verifyCmd": "$TC actions list action vlan", + "matchPattern": "^[ \t]+index [0-9]+ ref", + "matchCount": "32", + "teardown": [ + "$TC actions flush action vlan" + ] + }, + { + "id": "c84a", + "name": "Delete batch of 32 vlan pop actions", + "category": [ + "actions", + "vlan" + ], + "setup": [ + [ + "$TC actions flush action vlan", + 0, + 1, + 255 + ], + "bash -c \"for i in \\`seq 1 32\\`; do cmd=\\\"action vlan pop index \\$i \\\"; args=\\\"\\$args\\$cmd\\\"; done && $TC actions add \\$args\"" + ], + "cmdUnderTest": "bash -c \"for i in \\`seq 1 32\\`; do cmd=\\\"action vlan index \\$i \\\"; args=\"\\$args\\$cmd\"; done && $TC actions del \\$args\"", + "expExitCode": "0", + "verifyCmd": "$TC actions list action vlan", + "matchPattern": "^[ \t]+index [0-9]+ ref", + "matchCount": "0", + "teardown": [] } ] diff --git a/tools/testing/selftests/x86/test_vsyscall.c b/tools/testing/selftests/x86/test_vsyscall.c index 4602326b8f5b..a4f4d4cf22c3 100644 --- a/tools/testing/selftests/x86/test_vsyscall.c +++ b/tools/testing/selftests/x86/test_vsyscall.c @@ -451,7 +451,7 @@ static int test_vsys_x(void) printf("[OK]\tExecuting the vsyscall page failed: #PF(0x%lx)\n", segv_err); } else { - printf("[FAILT]\tExecution failed with the wrong error: #PF(0x%lx)\n", + printf("[FAIL]\tExecution failed with the wrong error: #PF(0x%lx)\n", segv_err); return 1; } |