aboutsummaryrefslogtreecommitdiffstats
path: root/tools/testing/selftests
diff options
context:
space:
mode:
Diffstat (limited to 'tools/testing/selftests')
-rwxr-xr-xtools/testing/selftests/net/pmtu.sh96
1 files changed, 80 insertions, 16 deletions
diff --git a/tools/testing/selftests/net/pmtu.sh b/tools/testing/selftests/net/pmtu.sh
index e2c94e47707c..912b2dc50be3 100755
--- a/tools/testing/selftests/net/pmtu.sh
+++ b/tools/testing/selftests/net/pmtu.sh
@@ -103,6 +103,15 @@
# and check that configured MTU is used on link creation and changes, and
# that MTU is properly calculated instead when MTU is not configured from
# userspace
+#
+# - cleanup_ipv4_exception
+# Similar to pmtu_ipv4_vxlan4_exception, but explicitly generate PMTU
+# exceptions on multiple CPUs and check that the veth device tear-down
+# happens in a timely manner
+#
+# - cleanup_ipv6_exception
+# Same as above, but use IPv6 transport from A to B
+
# Kselftest framework requirement - SKIP code is 4.
ksft_skip=4
@@ -135,7 +144,9 @@ tests="
pmtu_vti6_default_mtu vti6: default MTU assignment
pmtu_vti4_link_add_mtu vti4: MTU setting on link creation
pmtu_vti6_link_add_mtu vti6: MTU setting on link creation
- pmtu_vti6_link_change_mtu vti6: MTU changes on link changes"
+ pmtu_vti6_link_change_mtu vti6: MTU changes on link changes
+ cleanup_ipv4_exception ipv4: cleanup of cached exceptions
+ cleanup_ipv6_exception ipv6: cleanup of cached exceptions"
NS_A="ns-$(mktemp -u XXXXXX)"
NS_B="ns-$(mktemp -u XXXXXX)"
@@ -263,8 +274,6 @@ setup_fou_or_gue() {
${ns_a} ip link set ${encap}_a up
${ns_b} ip link set ${encap}_b up
-
- sleep 1
}
setup_fou44() {
@@ -302,6 +311,10 @@ setup_gue66() {
setup_namespaces() {
for n in ${NS_A} ${NS_B} ${NS_R1} ${NS_R2}; do
ip netns add ${n} || return 1
+
+ # Disable DAD, so that we don't have to wait to use the
+ # configured IPv6 addresses
+ ip netns exec ${n} sysctl -q net/ipv6/conf/default/accept_dad=0
done
}
@@ -337,8 +350,6 @@ setup_vti() {
${ns_a} ip link set vti${proto}_a up
${ns_b} ip link set vti${proto}_b up
-
- sleep 1
}
setup_vti4() {
@@ -375,8 +386,6 @@ setup_vxlan_or_geneve() {
${ns_a} ip link set ${type}_a up
${ns_b} ip link set ${type}_b up
-
- sleep 1
}
setup_geneve4() {
@@ -588,8 +597,8 @@ test_pmtu_ipvX() {
mtu "${ns_b}" veth_B-R2 1500
# Create route exceptions
- ${ns_a} ${ping} -q -M want -i 0.1 -w 2 -s 1800 ${dst1} > /dev/null
- ${ns_a} ${ping} -q -M want -i 0.1 -w 2 -s 1800 ${dst2} > /dev/null
+ ${ns_a} ${ping} -q -M want -i 0.1 -w 1 -s 1800 ${dst1} > /dev/null
+ ${ns_a} ${ping} -q -M want -i 0.1 -w 1 -s 1800 ${dst2} > /dev/null
# Check that exceptions have been created with the correct PMTU
pmtu_1="$(route_get_dst_pmtu_from_exception "${ns_a}" ${dst1})"
@@ -621,7 +630,7 @@ test_pmtu_ipvX() {
# Decrease remote MTU on path via R2, get new exception
mtu "${ns_r2}" veth_R2-B 400
mtu "${ns_b}" veth_B-R2 400
- ${ns_a} ${ping} -q -M want -i 0.1 -w 2 -s 1400 ${dst2} > /dev/null
+ ${ns_a} ${ping} -q -M want -i 0.1 -w 1 -s 1400 ${dst2} > /dev/null
pmtu_2="$(route_get_dst_pmtu_from_exception "${ns_a}" ${dst2})"
check_pmtu_value "lock 552" "${pmtu_2}" "exceeding MTU, with MTU < min_pmtu" || return 1
@@ -638,7 +647,7 @@ test_pmtu_ipvX() {
check_pmtu_value "1500" "${pmtu_2}" "increasing local MTU" || return 1
# Get new exception
- ${ns_a} ${ping} -q -M want -i 0.1 -w 2 -s 1400 ${dst2} > /dev/null
+ ${ns_a} ${ping} -q -M want -i 0.1 -w 1 -s 1400 ${dst2} > /dev/null
pmtu_2="$(route_get_dst_pmtu_from_exception "${ns_a}" ${dst2})"
check_pmtu_value "lock 552" "${pmtu_2}" "exceeding MTU, with MTU < min_pmtu" || return 1
}
@@ -687,7 +696,7 @@ test_pmtu_ipvX_over_vxlanY_or_geneveY_exception() {
mtu "${ns_a}" ${type}_a $((${ll_mtu} + 1000))
mtu "${ns_b}" ${type}_b $((${ll_mtu} + 1000))
- ${ns_a} ${ping} -q -M want -i 0.1 -w 2 -s $((${ll_mtu} + 500)) ${dst} > /dev/null
+ ${ns_a} ${ping} -q -M want -i 0.1 -w 1 -s $((${ll_mtu} + 500)) ${dst} > /dev/null
# Check that exception was created
pmtu="$(route_get_dst_pmtu_from_exception "${ns_a}" ${dst})"
@@ -767,7 +776,7 @@ test_pmtu_ipvX_over_fouY_or_gueY() {
mtu "${ns_a}" ${encap}_a $((${ll_mtu} + 1000))
mtu "${ns_b}" ${encap}_b $((${ll_mtu} + 1000))
- ${ns_a} ${ping} -q -M want -i 0.1 -w 2 -s $((${ll_mtu} + 500)) ${dst} > /dev/null
+ ${ns_a} ${ping} -q -M want -i 0.1 -w 1 -s $((${ll_mtu} + 500)) ${dst} > /dev/null
# Check that exception was created
pmtu="$(route_get_dst_pmtu_from_exception "${ns_a}" ${dst})"
@@ -825,13 +834,13 @@ test_pmtu_vti4_exception() {
# Send DF packet without exceeding link layer MTU, check that no
# exception is created
- ${ns_a} ping -q -M want -i 0.1 -w 2 -s ${ping_payload} ${tunnel4_b_addr} > /dev/null
+ ${ns_a} ping -q -M want -i 0.1 -w 1 -s ${ping_payload} ${tunnel4_b_addr} > /dev/null
pmtu="$(route_get_dst_pmtu_from_exception "${ns_a}" ${tunnel4_b_addr})"
check_pmtu_value "" "${pmtu}" "sending packet smaller than PMTU (IP payload length ${esp_payload_rfc4106})" || return 1
# Now exceed link layer MTU by one byte, check that exception is created
# with the right PMTU value
- ${ns_a} ping -q -M want -i 0.1 -w 2 -s $((ping_payload + 1)) ${tunnel4_b_addr} > /dev/null
+ ${ns_a} ping -q -M want -i 0.1 -w 1 -s $((ping_payload + 1)) ${tunnel4_b_addr} > /dev/null
pmtu="$(route_get_dst_pmtu_from_exception "${ns_a}" ${tunnel4_b_addr})"
check_pmtu_value "${esp_payload_rfc4106}" "${pmtu}" "exceeding PMTU (IP payload length $((esp_payload_rfc4106 + 1)))"
}
@@ -847,7 +856,7 @@ test_pmtu_vti6_exception() {
mtu "${ns_b}" veth_b 4000
mtu "${ns_a}" vti6_a 5000
mtu "${ns_b}" vti6_b 5000
- ${ns_a} ${ping6} -q -i 0.1 -w 2 -s 60000 ${tunnel6_b_addr} > /dev/null
+ ${ns_a} ${ping6} -q -i 0.1 -w 1 -s 60000 ${tunnel6_b_addr} > /dev/null
# Check that exception was created
pmtu="$(route_get_dst_pmtu_from_exception "${ns_a}" ${tunnel6_b_addr})"
@@ -1008,6 +1017,61 @@ test_pmtu_vti6_link_change_mtu() {
return ${fail}
}
+check_command() {
+ cmd=${1}
+
+ if ! which ${cmd} > /dev/null 2>&1; then
+ err " missing required command: '${cmd}'"
+ return 1
+ fi
+ return 0
+}
+
+test_cleanup_vxlanX_exception() {
+ outer="${1}"
+ encap="vxlan"
+ ll_mtu=4000
+
+ check_command taskset || return 2
+ cpu_list=$(grep -m 2 processor /proc/cpuinfo | cut -d ' ' -f 2)
+
+ setup namespaces routing ${encap}${outer} || return 2
+ trace "${ns_a}" ${encap}_a "${ns_b}" ${encap}_b \
+ "${ns_a}" veth_A-R1 "${ns_r1}" veth_R1-A \
+ "${ns_b}" veth_B-R1 "${ns_r1}" veth_R1-B
+
+ # Create route exception by exceeding link layer MTU
+ mtu "${ns_a}" veth_A-R1 $((${ll_mtu} + 1000))
+ mtu "${ns_r1}" veth_R1-A $((${ll_mtu} + 1000))
+ mtu "${ns_b}" veth_B-R1 ${ll_mtu}
+ mtu "${ns_r1}" veth_R1-B ${ll_mtu}
+
+ mtu "${ns_a}" ${encap}_a $((${ll_mtu} + 1000))
+ mtu "${ns_b}" ${encap}_b $((${ll_mtu} + 1000))
+
+ # Fill exception cache for multiple CPUs (2)
+ # we can always use inner IPv4 for that
+ for cpu in ${cpu_list}; do
+ taskset --cpu-list ${cpu} ${ns_a} ping -q -M want -i 0.1 -w 1 -s $((${ll_mtu} + 500)) ${tunnel4_b_addr} > /dev/null
+ done
+
+ ${ns_a} ip link del dev veth_A-R1 &
+ iplink_pid=$!
+ sleep 1
+ if [ "$(cat /proc/${iplink_pid}/cmdline 2>/dev/null | tr -d '\0')" = "iplinkdeldevveth_A-R1" ]; then
+ err " can't delete veth device in a timely manner, PMTU dst likely leaked"
+ return 1
+ fi
+}
+
+test_cleanup_ipv6_exception() {
+ test_cleanup_vxlanX_exception 6
+}
+
+test_cleanup_ipv4_exception() {
+ test_cleanup_vxlanX_exception 4
+}
+
usage() {
echo
echo "$0 [OPTIONS] [TEST]..."