diff options
Diffstat (limited to 'tools/testing')
| -rwxr-xr-x | tools/testing/selftests/net/fcnal-test.sh | 60 | ||||
| -rw-r--r-- | tools/testing/selftests/net/nettest.c | 6 |
2 files changed, 33 insertions, 33 deletions
diff --git a/tools/testing/selftests/net/fcnal-test.sh b/tools/testing/selftests/net/fcnal-test.sh index 02b0b9ead40b..edd33f83f80e 100755 --- a/tools/testing/selftests/net/fcnal-test.sh +++ b/tools/testing/selftests/net/fcnal-test.sh @@ -801,7 +801,7 @@ ipv4_tcp_md5_novrf() # basic use case log_start - run_cmd nettest -s -M ${MD5_PW} -r ${NSB_IP} & + run_cmd nettest -s -M ${MD5_PW} -m ${NSB_IP} & sleep 1 run_cmd_nsb nettest -r ${NSA_IP} -M ${MD5_PW} log_test $? 0 "MD5: Single address config" @@ -817,7 +817,7 @@ ipv4_tcp_md5_novrf() # wrong password log_start show_hint "Should timeout since client uses wrong password" - run_cmd nettest -s -M ${MD5_PW} -r ${NSB_IP} & + run_cmd nettest -s -M ${MD5_PW} -m ${NSB_IP} & sleep 1 run_cmd_nsb nettest -r ${NSA_IP} -M ${MD5_WRONG_PW} log_test $? 2 "MD5: Client uses wrong password" @@ -825,7 +825,7 @@ ipv4_tcp_md5_novrf() # client from different address log_start show_hint "Should timeout due to MD5 mismatch" - run_cmd nettest -s -M ${MD5_PW} -r ${NSB_LO_IP} & + run_cmd nettest -s -M ${MD5_PW} -m ${NSB_LO_IP} & sleep 1 run_cmd_nsb nettest -r ${NSA_IP} -M ${MD5_PW} log_test $? 2 "MD5: Client address does not match address configured with password" @@ -869,7 +869,7 @@ ipv4_tcp_md5() # basic use case log_start - run_cmd nettest -s -d ${VRF} -M ${MD5_PW} -r ${NSB_IP} & + run_cmd nettest -s -d ${VRF} -M ${MD5_PW} -m ${NSB_IP} & sleep 1 run_cmd_nsb nettest -r ${NSA_IP} -M ${MD5_PW} log_test $? 0 "MD5: VRF: Single address config" @@ -885,7 +885,7 @@ ipv4_tcp_md5() # wrong password log_start show_hint "Should timeout since client uses wrong password" - run_cmd nettest -s -d ${VRF} -M ${MD5_PW} -r ${NSB_IP} & + run_cmd nettest -s -d ${VRF} -M ${MD5_PW} -m ${NSB_IP} & sleep 1 run_cmd_nsb nettest -r ${NSA_IP} -M ${MD5_WRONG_PW} log_test $? 2 "MD5: VRF: Client uses wrong password" @@ -893,7 +893,7 @@ ipv4_tcp_md5() # client from different address log_start show_hint "Should timeout since server config differs from client" - run_cmd nettest -s -d ${VRF} -M ${MD5_PW} -r ${NSB_LO_IP} & + run_cmd nettest -s -d ${VRF} -M ${MD5_PW} -m ${NSB_LO_IP} & sleep 1 run_cmd_nsb nettest -r ${NSA_IP} -M ${MD5_PW} log_test $? 2 "MD5: VRF: Client address does not match address configured with password" @@ -930,31 +930,31 @@ ipv4_tcp_md5() # log_start - run_cmd nettest -s -d ${VRF} -M ${MD5_PW} -r ${NSB_IP} & - run_cmd nettest -s -M ${MD5_WRONG_PW} -r ${NSB_IP} & + run_cmd nettest -s -d ${VRF} -M ${MD5_PW} -m ${NSB_IP} & + run_cmd nettest -s -M ${MD5_WRONG_PW} -m ${NSB_IP} & sleep 1 run_cmd_nsb nettest -r ${NSA_IP} -M ${MD5_PW} log_test $? 0 "MD5: VRF: Single address config in default VRF and VRF, conn in VRF" log_start - run_cmd nettest -s -d ${VRF} -M ${MD5_PW} -r ${NSB_IP} & - run_cmd nettest -s -M ${MD5_WRONG_PW} -r ${NSB_IP} & + run_cmd nettest -s -d ${VRF} -M ${MD5_PW} -m ${NSB_IP} & + run_cmd nettest -s -M ${MD5_WRONG_PW} -m ${NSB_IP} & sleep 1 run_cmd_nsc nettest -r ${NSA_IP} -M ${MD5_WRONG_PW} log_test $? 0 "MD5: VRF: Single address config in default VRF and VRF, conn in default VRF" log_start show_hint "Should timeout since client in default VRF uses VRF password" - run_cmd nettest -s -d ${VRF} -M ${MD5_PW} -r ${NSB_IP} & - run_cmd nettest -s -M ${MD5_WRONG_PW} -r ${NSB_IP} & + run_cmd nettest -s -d ${VRF} -M ${MD5_PW} -m ${NSB_IP} & + run_cmd nettest -s -M ${MD5_WRONG_PW} -m ${NSB_IP} & sleep 1 run_cmd_nsc nettest -r ${NSA_IP} -M ${MD5_PW} log_test $? 2 "MD5: VRF: Single address config in default VRF and VRF, conn in default VRF with VRF pw" log_start show_hint "Should timeout since client in VRF uses default VRF password" - run_cmd nettest -s -d ${VRF} -M ${MD5_PW} -r ${NSB_IP} & - run_cmd nettest -s -M ${MD5_WRONG_PW} -r ${NSB_IP} & + run_cmd nettest -s -d ${VRF} -M ${MD5_PW} -m ${NSB_IP} & + run_cmd nettest -s -M ${MD5_WRONG_PW} -m ${NSB_IP} & sleep 1 run_cmd_nsb nettest -r ${NSA_IP} -M ${MD5_WRONG_PW} log_test $? 2 "MD5: VRF: Single address config in default VRF and VRF, conn in VRF with default VRF pw" @@ -993,7 +993,7 @@ ipv4_tcp_md5() # negative tests # log_start - run_cmd nettest -s -d ${NSA_DEV} -M ${MD5_PW} -r ${NSB_IP} + run_cmd nettest -s -d ${NSA_DEV} -M ${MD5_PW} -m ${NSB_IP} log_test $? 1 "MD5: VRF: Device must be a VRF - single address" log_start @@ -2265,7 +2265,7 @@ ipv6_tcp_md5_novrf() # basic use case log_start - run_cmd nettest -6 -s -M ${MD5_PW} -r ${NSB_IP6} & + run_cmd nettest -6 -s -M ${MD5_PW} -m ${NSB_IP6} & sleep 1 run_cmd_nsb nettest -6 -r ${NSA_IP6} -M ${MD5_PW} log_test $? 0 "MD5: Single address config" @@ -2281,7 +2281,7 @@ ipv6_tcp_md5_novrf() # wrong password log_start show_hint "Should timeout since client uses wrong password" - run_cmd nettest -6 -s -M ${MD5_PW} -r ${NSB_IP6} & + run_cmd nettest -6 -s -M ${MD5_PW} -m ${NSB_IP6} & sleep 1 run_cmd_nsb nettest -6 -r ${NSA_IP6} -M ${MD5_WRONG_PW} log_test $? 2 "MD5: Client uses wrong password" @@ -2289,7 +2289,7 @@ ipv6_tcp_md5_novrf() # client from different address log_start show_hint "Should timeout due to MD5 mismatch" - run_cmd nettest -6 -s -M ${MD5_PW} -r ${NSB_LO_IP6} & + run_cmd nettest -6 -s -M ${MD5_PW} -m ${NSB_LO_IP6} & sleep 1 run_cmd_nsb nettest -6 -r ${NSA_IP6} -M ${MD5_PW} log_test $? 2 "MD5: Client address does not match address configured with password" @@ -2333,7 +2333,7 @@ ipv6_tcp_md5() # basic use case log_start - run_cmd nettest -6 -s -d ${VRF} -M ${MD5_PW} -r ${NSB_IP6} & + run_cmd nettest -6 -s -d ${VRF} -M ${MD5_PW} -m ${NSB_IP6} & sleep 1 run_cmd_nsb nettest -6 -r ${NSA_IP6} -M ${MD5_PW} log_test $? 0 "MD5: VRF: Single address config" @@ -2349,7 +2349,7 @@ ipv6_tcp_md5() # wrong password log_start show_hint "Should timeout since client uses wrong password" - run_cmd nettest -6 -s -d ${VRF} -M ${MD5_PW} -r ${NSB_IP6} & + run_cmd nettest -6 -s -d ${VRF} -M ${MD5_PW} -m ${NSB_IP6} & sleep 1 run_cmd_nsb nettest -6 -r ${NSA_IP6} -M ${MD5_WRONG_PW} log_test $? 2 "MD5: VRF: Client uses wrong password" @@ -2357,7 +2357,7 @@ ipv6_tcp_md5() # client from different address log_start show_hint "Should timeout since server config differs from client" - run_cmd nettest -6 -s -d ${VRF} -M ${MD5_PW} -r ${NSB_LO_IP6} & + run_cmd nettest -6 -s -d ${VRF} -M ${MD5_PW} -m ${NSB_LO_IP6} & sleep 1 run_cmd_nsb nettest -6 -r ${NSA_IP6} -M ${MD5_PW} log_test $? 2 "MD5: VRF: Client address does not match address configured with password" @@ -2394,31 +2394,31 @@ ipv6_tcp_md5() # log_start - run_cmd nettest -6 -s -d ${VRF} -M ${MD5_PW} -r ${NSB_IP6} & - run_cmd nettest -6 -s -M ${MD5_WRONG_PW} -r ${NSB_IP6} & + run_cmd nettest -6 -s -d ${VRF} -M ${MD5_PW} -m ${NSB_IP6} & + run_cmd nettest -6 -s -M ${MD5_WRONG_PW} -m ${NSB_IP6} & sleep 1 run_cmd_nsb nettest -6 -r ${NSA_IP6} -M ${MD5_PW} log_test $? 0 "MD5: VRF: Single address config in default VRF and VRF, conn in VRF" log_start - run_cmd nettest -6 -s -d ${VRF} -M ${MD5_PW} -r ${NSB_IP6} & - run_cmd nettest -6 -s -M ${MD5_WRONG_PW} -r ${NSB_IP6} & + run_cmd nettest -6 -s -d ${VRF} -M ${MD5_PW} -m ${NSB_IP6} & + run_cmd nettest -6 -s -M ${MD5_WRONG_PW} -m ${NSB_IP6} & sleep 1 run_cmd_nsc nettest -6 -r ${NSA_IP6} -M ${MD5_WRONG_PW} log_test $? 0 "MD5: VRF: Single address config in default VRF and VRF, conn in default VRF" log_start show_hint "Should timeout since client in default VRF uses VRF password" - run_cmd nettest -6 -s -d ${VRF} -M ${MD5_PW} -r ${NSB_IP6} & - run_cmd nettest -6 -s -M ${MD5_WRONG_PW} -r ${NSB_IP6} & + run_cmd nettest -6 -s -d ${VRF} -M ${MD5_PW} -m ${NSB_IP6} & + run_cmd nettest -6 -s -M ${MD5_WRONG_PW} -m ${NSB_IP6} & sleep 1 run_cmd_nsc nettest -6 -r ${NSA_IP6} -M ${MD5_PW} log_test $? 2 "MD5: VRF: Single address config in default VRF and VRF, conn in default VRF with VRF pw" log_start show_hint "Should timeout since client in VRF uses default VRF password" - run_cmd nettest -6 -s -d ${VRF} -M ${MD5_PW} -r ${NSB_IP6} & - run_cmd nettest -6 -s -M ${MD5_WRONG_PW} -r ${NSB_IP6} & + run_cmd nettest -6 -s -d ${VRF} -M ${MD5_PW} -m ${NSB_IP6} & + run_cmd nettest -6 -s -M ${MD5_WRONG_PW} -m ${NSB_IP6} & sleep 1 run_cmd_nsb nettest -6 -r ${NSA_IP6} -M ${MD5_WRONG_PW} log_test $? 2 "MD5: VRF: Single address config in default VRF and VRF, conn in VRF with default VRF pw" @@ -2457,7 +2457,7 @@ ipv6_tcp_md5() # negative tests # log_start - run_cmd nettest -6 -s -d ${NSA_DEV} -M ${MD5_PW} -r ${NSB_IP6} + run_cmd nettest -6 -s -d ${NSA_DEV} -M ${MD5_PW} -m ${NSB_IP6} log_test $? 1 "MD5: VRF: Device must be a VRF - single address" log_start diff --git a/tools/testing/selftests/net/nettest.c b/tools/testing/selftests/net/nettest.c index 0e01a7447521..4c8d4570872d 100644 --- a/tools/testing/selftests/net/nettest.c +++ b/tools/testing/selftests/net/nettest.c @@ -291,13 +291,13 @@ static int tcp_md5_remote(int sd, struct sock_args *args) switch (args->version) { case AF_INET: sin.sin_port = htons(args->port); - sin.sin_addr = args->remote_addr.in; + sin.sin_addr = args->md5_prefix.v4.sin_addr; addr = &sin; alen = sizeof(sin); break; case AF_INET6: sin6.sin6_port = htons(args->port); - sin6.sin6_addr = args->remote_addr.in6; + sin6.sin6_addr = args->md5_prefix.v6.sin6_addr; addr = &sin6; alen = sizeof(sin6); break; @@ -725,7 +725,7 @@ static int convert_addr(struct sock_args *args, const char *_str, return 1; } } else { - args->prefix_len = pfx_len_max; + args->prefix_len = 0; } break; default: |