| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Following the recent update to MAINTAINERS update my e-mail address.
Signed-off-by: Maciej W. Rozycki <macro@orcam.me.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Following the recent update to MAINTAINERS update my e-mail address.
Signed-off-by: Maciej W. Rozycki <macro@orcam.me.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Implement this callback in order to get the offloaded stats added to the
kernel stats.
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Fix the following coccicheck warning:
./drivers/isdn/mISDN/dsp_core.c:956:6-9: Unneeded variable: "err".
Return "0" on line 1001
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Signed-off-by: Yang Li <yang.lee@linux.alibaba.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
BCM4908 devices have MAC address accessible using NVMEM so it's needed
to use OF helper for reading it.
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
gro list uses skb_shinfo(skb)->frag_list to link two skb together,
and NAPI_GRO_CB(p)->last->next is used when there are more skb,
see skb_gro_receive_list(). gso expects that each segmented skb is
linked together using skb->next, so only the first skb->next need
to set to skb_shinfo(skb)-> frag_list when doing gso list segment.
It is the same reason that nskb->next does not need to be set to
list_skb before goto the error handling, because nskb->next already
pointers to list_skb.
And nskb is also the last skb at the end of loop, so remove tail
variable and use nskb instead.
Signed-off-by: Yunsheng Lin <linyunsheng@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
In preparation to enable -Wimplicit-fallthrough for Clang, fix multiple
warnings by explicitly adding a couple of break statements instead of
just letting the code fall through to the next case.
Link: https://github.com/KSPP/linux/issues/115
Reviewed-by: Igor Russkikh <irusskikh@marvell.com>
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
In preparation to enable -Wimplicit-fallthrough for Clang, fix multiple
warnings by explicitly adding multiple break statements instead of
letting the code fall through to the next case.
Link: https://github.com/KSPP/linux/issues/115
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
In preparation to enable -Wimplicit-fallthrough for Clang, fix multiple
warnings by explicitly adding multiple break statements instead of
letting the code fall through to the next case.
Link: https://github.com/KSPP/linux/issues/115
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
In preparation to enable -Wimplicit-fallthrough for Clang, fix a warning
by explicitly adding a break statement instead of letting the code fall
through to the next case.
Link: https://github.com/KSPP/linux/issues/115
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
In preparation to enable -Wimplicit-fallthrough for Clang, fix a warning
by explicitly adding a break statement instead of letting the code fall
through to the next case.
Link: https://github.com/KSPP/linux/issues/115
Acked-by: Nikolay Aleksandrov <nikolay@nvidia.com>
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
In preparation to enable -Wimplicit-fallthrough for Clang, fix a warning
by explicitly adding a break statement instead of letting the code fall
through to the next case.
Link: https://github.com/KSPP/linux/issues/115
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
In preparation to enable -Wimplicit-fallthrough for Clang, fix a warning
by explicitly adding a break statement instead of letting the code fall
through to the next case.
Link: https://github.com/KSPP/linux/issues/115
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
In preparation to enable -Wimplicit-fallthrough for Clang, fix a warning
by explicitly adding a break statement instead of just letting the code
fall through to the next case.
Link: https://github.com/KSPP/linux/issues/115
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
In preparation to enable -Wimplicit-fallthrough for Clang, fix a warning
by explicitly adding a break statement instead of just letting the code
fall through to the next case.
Link: https://github.com/KSPP/linux/issues/115
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
In preparation to enable -Wimplicit-fallthrough for Clang, fix a warning
by explicitly adding a break statement instead of just letting the code
fall through to the next case.
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Link: https://github.com/KSPP/linux/issues/115
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
There is a regular need in the kernel to provide a way to declare having
a dynamically sized set of trailing elements in a structure. Kernel code
should always use “flexible array members”[1] for these cases. The older
style of one-element or zero-length arrays should no longer be used[2].
Refactor the code according to the use of flexible-array members in
smt_sif_operation structure, instead of one-element arrays. Also, make
use of the struct_size() helper instead of the open-coded version
to calculate the size of the struct-with-flex-array. Additionally, make
use of the typeof operator to properly determine the object type to be
passed to macro smtod().
Also, this helps the ongoing efforts to enable -Warray-bounds by fixing
the following warnings:
CC [M] drivers/net/fddi/skfp/smt.o
drivers/net/fddi/skfp/smt.c: In function ‘smt_send_sif_operation’:
drivers/net/fddi/skfp/smt.c:1084:30: warning: array subscript 1 is above array bounds of ‘struct smt_p_lem[1]’ [-Warray-bounds]
1084 | smt_fill_lem(smc,&sif->lem[i],i) ;
| ~~~~~~~~^~~
In file included from drivers/net/fddi/skfp/h/smc.h:42,
from drivers/net/fddi/skfp/smt.c:15:
drivers/net/fddi/skfp/h/smt.h:767:19: note: while referencing ‘lem’
767 | struct smt_p_lem lem[1] ; /* phy lem status */
| ^~~
drivers/net/fddi/skfp/smt.c:1084:30: warning: array subscript 1 is above array bounds of ‘struct smt_p_lem[1]’ [-Warray-bounds]
1084 | smt_fill_lem(smc,&sif->lem[i],i) ;
| ~~~~~~~~^~~
In file included from drivers/net/fddi/skfp/h/smc.h:42,
from drivers/net/fddi/skfp/smt.c:15:
drivers/net/fddi/skfp/h/smt.h:767:19: note: while referencing ‘lem’
767 | struct smt_p_lem lem[1] ; /* phy lem status */
| ^~~
drivers/net/fddi/skfp/smt.c:1084:30: warning: array subscript 1 is above array bounds of ‘struct smt_p_lem[1]’ [-Warray-bounds]
1084 | smt_fill_lem(smc,&sif->lem[i],i) ;
| ~~~~~~~~^~~
In file included from drivers/net/fddi/skfp/h/smc.h:42,
from drivers/net/fddi/skfp/smt.c:15:
drivers/net/fddi/skfp/h/smt.h:767:19: note: while referencing ‘lem’
767 | struct smt_p_lem lem[1] ; /* phy lem status */
| ^~~
drivers/net/fddi/skfp/smt.c:1084:30: warning: array subscript 1 is above array bounds of ‘struct smt_p_lem[1]’ [-Warray-bounds]
1084 | smt_fill_lem(smc,&sif->lem[i],i) ;
| ~~~~~~~~^~~
In file included from drivers/net/fddi/skfp/h/smc.h:42,
from drivers/net/fddi/skfp/smt.c:15:
drivers/net/fddi/skfp/h/smt.h:767:19: note: while referencing ‘lem’
767 | struct smt_p_lem lem[1] ; /* phy lem status */
| ^~~
drivers/net/fddi/skfp/smt.c:1084:30: warning: array subscript 1 is above array bounds of ‘struct smt_p_lem[1]’ [-Warray-bounds]
1084 | smt_fill_lem(smc,&sif->lem[i],i) ;
| ~~~~~~~~^~~
In file included from drivers/net/fddi/skfp/h/smc.h:42,
from drivers/net/fddi/skfp/smt.c:15:
drivers/net/fddi/skfp/h/smt.h:767:19: note: while referencing ‘lem’
767 | struct smt_p_lem lem[1] ; /* phy lem status */
| ^~~
drivers/net/fddi/skfp/smt.c:1084:30: warning: array subscript 1 is above array bounds of ‘struct smt_p_lem[1]’ [-Warray-bounds]
1084 | smt_fill_lem(smc,&sif->lem[i],i) ;
| ~~~~~~~~^~~
In file included from drivers/net/fddi/skfp/h/smc.h:42,
from drivers/net/fddi/skfp/smt.c:15:
drivers/net/fddi/skfp/h/smt.h:767:19: note: while referencing ‘lem’
767 | struct smt_p_lem lem[1] ; /* phy lem status */
| ^~~
drivers/net/fddi/skfp/smt.c:1084:30: warning: array subscript 1 is above array bounds of ‘struct smt_p_lem[1]’ [-Warray-bounds]
1084 | smt_fill_lem(smc,&sif->lem[i],i) ;
| ~~~~~~~~^~~
In file included from drivers/net/fddi/skfp/h/smc.h:42,
from drivers/net/fddi/skfp/smt.c:15:
drivers/net/fddi/skfp/h/smt.h:767:19: note: while referencing ‘lem’
767 | struct smt_p_lem lem[1] ; /* phy lem status */
| ^~~
drivers/net/fddi/skfp/smt.c:1084:30: warning: array subscript 1 is above array bounds of ‘struct smt_p_lem[1]’ [-Warray-bounds]
1084 | smt_fill_lem(smc,&sif->lem[i],i) ;
| ~~~~~~~~^~~
In file included from drivers/net/fddi/skfp/h/smc.h:42,
from drivers/net/fddi/skfp/smt.c:15:
drivers/net/fddi/skfp/h/smt.h:767:19: note: while referencing ‘lem’
767 | struct smt_p_lem lem[1] ; /* phy lem status */
| ^~~
drivers/net/fddi/skfp/smt.c:1084:30: warning: array subscript 1 is above array bounds of ‘struct smt_p_lem[1]’ [-Warray-bounds]
1084 | smt_fill_lem(smc,&sif->lem[i],i) ;
| ~~~~~~~~^~~
In file included from drivers/net/fddi/skfp/h/smc.h:42,
from drivers/net/fddi/skfp/smt.c:15:
drivers/net/fddi/skfp/h/smt.h:767:19: note: while referencing ‘lem’
767 | struct smt_p_lem lem[1] ; /* phy lem status */
| ^~~
drivers/net/fddi/skfp/smt.c:1084:30: warning: array subscript 1 is above array bounds of ‘struct smt_p_lem[1]’ [-Warray-bounds]
1084 | smt_fill_lem(smc,&sif->lem[i],i) ;
| ~~~~~~~~^~~
In file included from drivers/net/fddi/skfp/h/smc.h:42,
from drivers/net/fddi/skfp/smt.c:15:
drivers/net/fddi/skfp/h/smt.h:767:19: note: while referencing ‘lem’
767 | struct smt_p_lem lem[1] ; /* phy lem status */
[1] https://en.wikipedia.org/wiki/Flexible_array_member
[2] https://www.kernel.org/doc/html/v5.10/process/deprecated.html#zero-length-and-one-element-arrays
Link: https://github.com/KSPP/linux/issues/79
Link: https://github.com/KSPP/linux/issues/109
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
There is no need to assign the msg->msg_name to sin or sin6,
because there is DECLARE_SOCKADDR statement.
Signed-off-by: Yejune Deng <yejune.deng@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
rewriteing -> rewriting
Signed-off-by: Wang Qing <wangqing@vivo.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
wheter -> whether
Signed-off-by: Wang Qing <wangqing@vivo.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The number of queues implemented by many virtio backends is limited,
especially some machines have a large number of CPUs. In this case, it
is often impossible to allocate a separate queue for
XDP_TX/XDP_REDIRECT, then xdp cannot be loaded to work, even xdp does
not use the XDP_TX/XDP_REDIRECT.
This patch allows XDP_TX/XDP_REDIRECT to run by reuse the existing SQ
with __netif_tx_lock() hold when there are not enough queues.
Signed-off-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com>
Reviewed-by: Dust Li <dust.li@linux.alibaba.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The bit mask for MSG_* seems a little confused here. Replace it
with BIT() to make it clear to understand.
Signed-off-by: Menglong Dong <dong.menglong@zte.com.cn>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
After my patch there is CONFIG_ATA defined twice.
Remove the duplicate one.
Same problem for CONFIG_HAPPYMEAL, except I added as builtin for boot
test with NFS.
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Fixes: a57cdeb369ef ("sparc: sparc64_defconfig: add necessary configs for qemu")
Signed-off-by: Corentin Labbe <clabbe@baylibre.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
is_no_fault_exception() has two bugs which were discovered via random
opcode testing with stress-ng. Both are caused by improper filtering
of opcodes.
The first bug can be triggered by a floating point store with a no-fault
ASI, for instance "sta %f0, [%g0] #ASI_PNF", opcode C1A01040.
The code first tests op3[5] (0x1000000), which denotes a floating
point instruction, and then tests op3[2] (0x200000), which denotes a
store instruction. But these bits are not mutually exclusive, and the
above mentioned opcode has both bits set. The intent is to filter out
stores, so the test for stores must be done first in order to have
any effect.
The second bug can be triggered by a floating point load with one of
the invalid ASI values 0x8e or 0x8f, which pass this check in
is_no_fault_exception():
if ((asi & 0xf2) == ASI_PNF)
An example instruction is "ldqa [%l7 + %o7] #ASI 0x8f, %f38",
opcode CF95D1EF. Asi values greater than 0x8b (ASI_SNFL) are fatal
in handle_ldf_stq(), and is_no_fault_exception() must not allow these
invalid asi values to make it that far.
In both of these cases, handle_ldf_stq() reacts by calling
sun4v_data_access_exception() or spitfire_data_access_exception(),
which call is_no_fault_exception() and results in an infinite
recursion.
Signed-off-by: Rob Gardner <rob.gardner@oracle.com>
Tested-by: Anatoly Pugachev <matorola@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The cited commit reworked the state machine for pending TX buffers.
In qeth_iqd_tx_complete() it turned PENDING into a transient state, and
uses NEED_QAOB for buffers that get parked while waiting for their QAOB
completion.
But it missed to adjust the check in qeth_tx_complete_buf(). So if
qeth_tx_complete_pending_bufs() is called during teardown to drain
the parked TX buffers, we no longer raise a notification for af_iucv.
Instead of updating the checked state, just move this code into
qeth_tx_complete_pending_bufs() itself. This also gets rid of the
special-case in the common TX completion path.
Fixes: 8908f36d20d8 ("s390/qeth: fix af_iucv notification race")
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
When a QAOB notifies us that a pending TX buffer has been delivered, the
actual TX completion processing by qeth_tx_complete_pending_bufs()
is done within the context of a TX NAPI instance. We shouldn't rely on
this instance being scheduled by some other TX event, but just do it
ourselves.
qeth_qdio_handle_aob() is called from qeth_poll(), ie. our main NAPI
instance. To avoid touching the TX queue's NAPI instance
before/after it is (un-)registered, reorder the code in qeth_open()
and qeth_stop() accordingly.
Fixes: 0da9581ddb0f ("qeth: exploit asynchronous delivery of storage blocks")
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The current design attaches a pending TX buffer to a custom
single-linked list, which is anchored at the buffer's slot on the
TX ring. The buffer is then checked for final completion whenever
this slot is processed during a subsequent TX NAPI poll cycle.
But if there's insufficient traffic on the ring, we might never make
enough progress to get back to this ring slot and discover the pending
buffer's final TX completion. In particular if this missing TX
completion blocks the application from sending further traffic.
So convert the custom single-linked list code to a per-queue list_head,
and scan this list on every TX NAPI cycle.
Fixes: 0da9581ddb0f ("qeth: exploit asynchronous delivery of storage blocks")
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
When qeth_alloc_qdio_queues() fails to allocate one of the buffers that
back an Output Queue, the 'out_freeoutqbufs' path will free all
previously allocated buffers for this queue. But it misses to free the
half-finished queue struct itself.
Move the buffer allocation into qeth_alloc_output_queue(), and deal with
such errors internally.
Fixes: 0da9581ddb0f ("qeth: exploit asynchronous delivery of storage blocks")
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Reviewed-by: Alexandra Winter <wintera@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
A packet with skb_inner_network_header(skb) == skb_network_header(skb)
and ETH_P_MPLS_UC will prevent mpls_gso_segment from pulling any headers
from the packet. Subsequently, the call to skb_mac_gso_segment will
again call mpls_gso_segment with the same packet leading to an infinite
loop. In addition, ensure that the header length is a multiple of four,
which should hold irrespective of the number of stacked labels.
Signed-off-by: Balazs Nemeth <bnemeth@redhat.com>
Acked-by: Willem de Bruijn <willemb@google.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
For gso packets, virtio_net_hdr_set_proto sets the protocol (if it isn't
set) based on the type in the virtio net hdr, but the skb could contain
anything since it could come from packet_snd through a raw socket. If
there is a mismatch between what virtio_net_hdr_set_proto sets and
the actual protocol, then the skb could be handled incorrectly later
on.
An example where this poses an issue is with the subsequent call to
skb_flow_dissect_flow_keys_basic which relies on skb->protocol being set
correctly. A specially crafted packet could fool
skb_flow_dissect_flow_keys_basic preventing EINVAL to be returned.
Avoid blindly trusting the information provided by the virtio net header
by checking that the protocol in the packet actually matches the
protocol set by virtio_net_hdr_set_proto. Note that since the protocol
is only checked if skb->dev implements header_ops->parse_protocol,
packets from devices without the implementation are not checked at this
stage.
Fixes: 9274124f023b ("net: stricter validation of untrusted gso packets")
Signed-off-by: Balazs Nemeth <bnemeth@redhat.com>
Acked-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The XDP_REDIRECT implementations for maps and non-maps are fairly
similar, but obviously need to take different code paths depending on
if the target is using a map or not. Today, the redirect targets for
XDP either uses a map, or is based on ifindex.
Here, the map type and id are added to bpf_redirect_info, instead of
the actual map. Map type, map item/ifindex, and the map_id (if any) is
passed to xdp_do_redirect().
For ifindex-based redirect, used by the bpf_redirect() XDP BFP helper,
a special map type/id are used. Map type of UNSPEC together with map id
equal to INT_MAX has the special meaning of an ifindex based
redirect. Note that valid map ids are 1 inclusive, INT_MAX exclusive
([1,INT_MAX[).
In addition to making the code easier to follow, using explicit type
and id in bpf_redirect_info has a slight positive performance impact
by avoiding a pointer indirection for the map type lookup, and instead
use the cacheline for bpf_redirect_info.
Since the actual map is not passed via bpf_redirect_info anymore, the
map lookup is only done in the BPF helper. This means that the
bpf_clear_redirect_map() function can be removed. The actual map item
is RCU protected.
The bpf_redirect_info flags member is not used by XDP, and not
read/written any more. The map member is only written to when
required/used, and not unconditionally.
Signed-off-by: Björn Töpel <bjorn.topel@intel.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Acked-by: Jesper Dangaard Brouer <brouer@redhat.com>
Acked-by: Toke Høiland-Jørgensen <toke@redhat.com>
Link: https://lore.kernel.org/bpf/20210308112907.559576-3-bjorn.topel@gmail.com
|
|
Currently the bpf_redirect_map() implementation dispatches to the
correct map-lookup function via a switch-statement. To avoid the
dispatching, this change adds bpf_redirect_map() as a map
operation. Each map provides its bpf_redirect_map() version, and
correct function is automatically selected by the BPF verifier.
A nice side-effect of the code movement is that the map lookup
functions are now local to the map implementation files, which removes
one additional function call.
Signed-off-by: Björn Töpel <bjorn.topel@intel.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Jesper Dangaard Brouer <brouer@redhat.com>
Acked-by: Toke Høiland-Jørgensen <toke@redhat.com>
Link: https://lore.kernel.org/bpf/20210308112907.559576-2-bjorn.topel@gmail.com
|
|
Don't assign dp to partner if it's the same port that xrs700x_hsr_join
was called with. The partner port is supposed to be the other port in
the HSR/PRP redundant pair not the same port. This fixes an issue
observed in testing where forwarding between redundant HSR ports on this
switch didn't work depending on the order the ports were added to the
hsr device.
Fixes: bd62e6f5e6a9 ("net: dsa: xrs700x: add HSR offloading support")
Signed-off-by: George McCollister <george.mccollister@gmail.com>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Add missing return type to BPF_KPROBE definition. Without it, compiler
generates the following warning:
progs/loop6.c:68:12: warning: type specifier missing, defaults to 'int' [-Wimplicit-int]
BPF_KPROBE(trace_virtqueue_add_sgs, void *unused, struct scatterlist **sgs,
^
1 warning generated.
Fixes: 86a35af628e5 ("selftests/bpf: Add a verifier scale test with unknown bounded loop")
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/bpf/20210309044322.3487636-1-andrii@kernel.org
|
|
For the devices in this driver, the default qdisc is "noqueue",
because their "tx_queue_len" is 0.
In function "__dev_queue_xmit" in "net/core/dev.c", devices with the
"noqueue" qdisc are specially handled. Packets are transmitted without
being queued after a "dev->flags & IFF_UP" check. However, it's possible
that even if this check succeeds, "ops->ndo_stop" may still have already
been called. This is because in "__dev_close_many", "ops->ndo_stop" is
called before clearing the "IFF_UP" flag.
If we call "netif_stop_queue" in "ops->ndo_stop", then it's possible in
"__dev_queue_xmit", it sees the "IFF_UP" flag is present, and then it
checks "netif_xmit_stopped" and finds that the queue is already stopped.
In this case, it will complain that:
"Virtual device ... asks to queue packet!"
To prevent "__dev_queue_xmit" from generating this complaint, we should
not call "netif_stop_queue" in "ops->ndo_stop".
We also don't need to call "netif_start_queue" in "ops->ndo_open",
because after a netdev is allocated and registered, the
"__QUEUE_STATE_DRV_XOFF" flag is initially not set, so there is no need
to call "netif_start_queue" to clear it.
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Xie He <xie.he.0141@gmail.com>
Acked-by: Martin Schiller <ms@dev.tdt.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Check that dumping various floating-point types produces a valid C
code.
Suggested-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20210309005649.162480-3-iii@linux.ibm.com
|
|
Verify that bpf_core_field_size() is working correctly with floats.
Also document the required clang version.
Suggested-by: John Fastabend <john.fastabend@gmail.com>
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20210309005649.162480-2-iii@linux.ibm.com
|
|
BMIPS is one of the few platforms that do change the exception base.
After commit 2dcb39645441 ("memblock: do not start bottom-up allocations
with kernel_end") we started seeing BMIPS boards fail to boot with the
built-in FDT being corrupted.
Before the cited commit, early allocations would be in the [kernel_end,
RAM_END] range, but after commit they would be within [RAM_START +
PAGE_SIZE, RAM_END].
The custom exception base handler that is installed by
bmips_ebase_setup() done for BMIPS5000 CPUs ends-up trampling on the
memory region allocated by unflatten_and_copy_device_tree() thus
corrupting the FDT used by the kernel.
To fix this, we need to perform an early reservation of the custom
exception space. Additional we reserve the first 4k (1k for R3k) for
either normal exception vector space (legacy CPUs) or special vectors
like cache exceptions.
Huge thanks to Serge for analysing and proposing a solution to this
issue.
Fixes: 2dcb39645441 ("memblock: do not start bottom-up allocations with kernel_end")
Reported-by: Kamal Dasu <kdasu.kdev@gmail.com>
Debugged-by: Serge Semin <Sergey.Semin@baikalelectronics.ru>
Acked-by: Mike Rapoport <rppt@linux.ibm.com>
Tested-by: Florian Fainelli <f.fainelli@gmail.com>
Reviewed-by: Serge Semin <fancer.lancer@gmail.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
|
|
this one is similar to the phy_data allocation fix in uPD98402, the
driver allocate the idt77105_priv and store to dev_data but later
dereference using dev->dev_data, which will cause null-ptr-dereference.
fix this issue by changing dev_data to phy_data so that PRIV(dev) can
work correctly.
Signed-off-by: Tong Zhang <ztong0001@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
dev->dev_data is set in zatm.c, calling zatm_start() will overwrite this
dev->dev_data in uPD98402_start() and a subsequent PRIV(dev)->lock
(i.e dev->phy_data->lock) will result in a null-ptr-dereference.
I believe this is a typo and what it actually want to do is to allocate
phy_data instead of dev_data.
Signed-off-by: Tong Zhang <ztong0001@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
phy_data means private PHY data not date
Signed-off-by: Tong Zhang <ztong0001@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
When sock_alloc_send_skb() returns NULL to skb, no error return code of
qrtr_sendmsg() is assigned.
To fix this bug, rc is assigned with -ENOMEM in this case.
Fixes: 194ccc88297a ("net: qrtr: Support decoding incoming v2 packets")
Reported-by: TOTE Robot <oslab@tsinghua.edu.cn>
Signed-off-by: Jia-Ju Bai <baijiaju1990@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
in current Linux, MPTCP peers advertising endpoints with port numbers use
a sub-option length that wrongly accounts for the trailing TCP NOP. Also,
receivers will only process incoming ADD_ADDR with port having such wrong
sub-option length. Fix this, making ADD_ADDR compliant to RFC8684 §3.4.1.
this can be verified running tcpdump on the kselftests artifacts:
unpatched kernel:
[root@bottarga mptcp]# tcpdump -tnnr unpatched.pcap | grep add-addr
reading from file unpatched.pcap, link-type LINUX_SLL (Linux cooked v1), snapshot length 65535
IP 10.0.1.1.10000 > 10.0.1.2.53078: Flags [.], ack 101, win 509, options [nop,nop,TS val 214459678 ecr 521312851,mptcp add-addr v1 id 1 a00:201:2774:2d88:7436:85c3:17fd:101], length 0
IP 10.0.1.2.53078 > 10.0.1.1.10000: Flags [.], ack 101, win 502, options [nop,nop,TS val 521312852 ecr 214459678,mptcp add-addr[bad opt]]
patched kernel:
[root@bottarga mptcp]# tcpdump -tnnr patched.pcap | grep add-addr
reading from file patched.pcap, link-type LINUX_SLL (Linux cooked v1), snapshot length 65535
IP 10.0.1.1.10000 > 10.0.1.2.38178: Flags [.], ack 101, win 509, options [nop,nop,TS val 3728873902 ecr 2732713192,mptcp add-addr v1 id 1 10.0.2.1:10100 hmac 0xbccdfcbe59292a1f,nop,nop], length 0
IP 10.0.1.2.38178 > 10.0.1.1.10000: Flags [.], ack 101, win 502, options [nop,nop,TS val 2732713195 ecr 3728873902,mptcp add-addr v1-echo id 1 10.0.2.1:10100,nop,nop], length 0
Fixes: 22fb85ffaefb ("mptcp: add port support for ADD_ADDR suboption writing")
CC: stable@vger.kernel.org # 5.11+
Reviewed-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Acked-and-tested-by: Geliang Tang <geliangtang@gmail.com>
Signed-off-by: Davide Caratti <dcaratti@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
When slave is NULL or slave_ops->ndo_neigh_setup is NULL, no error
return code of bond_neigh_init() is assigned.
To fix this bug, ret is assigned with -EINVAL in these cases.
Fixes: 9e99bfefdbce ("bonding: fix bond_neigh_init()")
Reported-by: TOTE Robot <oslab@tsinghua.edu.cn>
Signed-off-by: Jia-Ju Bai <baijiaju1990@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The txtime is passed to the driver in skb->skb_mstamp_ns, which is
actually in a union with skb->tstamp (the place where software
timestamps are kept).
Since commit b50a5c70ffa4 ("net: allow simultaneous SW and HW transmit
timestamping"), __sock_recv_timestamp has some logic for making sure
that the two calls to skb_tstamp_tx:
skb_tx_timestamp(skb) # Software timestamp in the driver
-> skb_tstamp_tx(skb, NULL)
and
skb_tstamp_tx(skb, &shhwtstamps) # Hardware timestamp in the driver
will both do the right thing and in a race-free manner, meaning that
skb_tx_timestamp will deliver a cmsg with the software timestamp only,
and skb_tstamp_tx with a non-NULL hwtstamps argument will deliver a cmsg
with the hardware timestamp only.
Why are races even possible? Well, because although the software timestamp
skb->tstamp is private per skb, the hardware timestamp skb_hwtstamps(skb)
lives in skb_shinfo(skb), an area which is shared between skbs and their
clones. And skb_tstamp_tx works by cloning the packets when timestamping
them, therefore attempting to perform hardware timestamping on an skb's
clone will also change the hardware timestamp of the original skb. And
the original skb might have been yet again cloned for software
timestamping, at an earlier stage.
So the logic in __sock_recv_timestamp can't be as simple as saying
"does this skb have a hardware timestamp? if yes I'll send the hardware
timestamp to the socket, otherwise I'll send the software timestamp",
precisely because the hardware timestamp is shared.
Instead, it's quite the other way around: __sock_recv_timestamp says
"does this skb have a software timestamp? if yes, I'll send the software
timestamp, otherwise the hardware one". This works because the software
timestamp is not shared with clones.
But that means we have a problem when we attempt hardware timestamping
with skbs that don't have the skb->tstamp == 0. __sock_recv_timestamp
will say "oh, yeah, this must be some sort of odd clone" and will not
deliver the hardware timestamp to the socket. And this is exactly what
is happening when we have txtime enabled on the socket: as mentioned,
that is put in a union with skb->tstamp, so it is quite easy to mistake
it.
Do what other drivers do (intel igb/igc) and write zero to skb->tstamp
before taking the hardware timestamp. It's of no use to us now (we're
already on the TX confirmation path).
Fixes: 0d08c9ec7d6e ("enetc: add support time specific departure base on the qos etf")
Cc: Vinicius Costa Gomes <vinicius.gomes@intel.com>
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Acked-by: Vinicius Costa Gomes <vinicius.gomes@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
On LS1028A, the MAC RX FIFO defaults to the value 2, which is too high
and may lead to RX lock-up under traffic at a rate higher than 6 Gbps.
Set it to 1 instead, as recommended by the hardware design team and by
later versions of the ENETC block guide.
Signed-off-by: Alex Marginean <alexandru.marginean@nxp.com>
Reviewed-by: Claudiu Manoil <claudiu.manoil@nxp.com>
Reviewed-by: Jason Liu <jason.hui.liu@nxp.com>
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The second IRQ line really is optional, so use
platform_get_irq_optional() to obtain it.
Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
We must disable the regulator that was enabled in the probe function.
Fixes: 7994fe55a4a2 ("dm9000: Add regulator and reset support to dm9000")
Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
When the probe fails or requests to be defered, we must disable the
regulator that was previously enabled.
Fixes: 7994fe55a4a2 ("dm9000: Add regulator and reset support to dm9000")
Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Tobias reports that after the blamed patch, VLAN objects being added to
a bridge device are being added to all slave ports instead (swp2, swp3).
ip link add br0 type bridge vlan_filtering 1
ip link set swp2 master br0
ip link set swp3 master br0
bridge vlan add dev br0 vid 100 self
This is because the fix was too broad: we made dsa_port_offloads_netdev
say "yes, I offload the br0 bridge" for all slave ports, but we didn't
add the checks whether the switchdev object was in fact meant for the
physical port or for the bridge itself. So we are reacting on events in
a way in which we shouldn't.
The reason why the fix was too broad is because the question itself,
"does this DSA port offload this netdev", was too broad in the first
place. The solution is to disambiguate the question and separate it into
two different functions, one to be called for each switchdev attribute /
object that has an orig_dev == net_bridge (dsa_port_offloads_bridge),
and the other for orig_dev == net_bridge_port (*_offloads_bridge_port).
In the case of VLAN objects on the bridge interface, this solves the
problem because we know that VLAN objects are per bridge port and not
per bridge. And when orig_dev is equal to the net_bridge, we offload it
as a bridge, but not as a bridge port; that's how we are able to skip
reacting on those events. Note that this is compatible with future plans
to have explicit offloading of VLAN objects on the bridge interface as a
bridge port (in DSA, this signifies that we should add that VLAN towards
the CPU port).
Fixes: 99b8202b179f ("net: dsa: fix SWITCHDEV_ATTR_ID_BRIDGE_VLAN_FILTERING getting ignored")
Reported-by: Tobias Waldekranz <tobias@waldekranz.com>
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Tobias Waldekranz <tobias@waldekranz.com>
Tested-by: Tobias Waldekranz <tobias@waldekranz.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
Maciej W. Rozycki
Ido Schimmel
Yang Li
Rafał Miłecki
Yunsheng Lin
Gustavo A. R. Silva
Yejune Deng
Wang Qing
Xuan Zhuo
Menglong Dong
Corentin Labbe
Rob Gardner
Julian Wiedmann
Balazs Nemeth
Björn Töpel
George McCollister
Andrii Nakryiko
Xie He
Ilya Leoshkevich
Thomas Bogendoerfer
Tong Zhang
Jia-Ju Bai
Davide Caratti
Vladimir Oltean
Alex Marginean
Paul Cercueil