| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Patch series "mm/memory_hotplug: Shrink zones before removing memory", v6.
This series fixes the access of uninitialized memmaps when shrinking
zones/nodes and when removing memory. Also, it contains all fixes for
crashes that can be triggered when removing certain namespace using
memunmap_pages() - ZONE_DEVICE, reported by Aneesh.
We stop trying to shrink ZONE_DEVICE, as it's buggy, fixing it would be
more involved (we don't have SECTION_IS_ONLINE as an indicator), and
shrinking is only of limited use (set_zone_contiguous() cannot detect the
ZONE_DEVICE as contiguous).
We continue shrinking !ZONE_DEVICE zones, however, I reduced the amount of
code to a minimum. Shrinking is especially necessary to keep
zone->contiguous set where possible, especially, on memory unplug of DIMMs
at zone boundaries.
--------------------------------------------------------------------------
Zones are now properly shrunk when offlining memory blocks or when
onlining failed. This allows to properly shrink zones on memory unplug
even if the separate memory blocks of a DIMM were onlined to different
zones or re-onlined to a different zone after offlining.
Example:
:/# cat /proc/zoneinfo
Node 1, zone Movable
spanned 0
present 0
managed 0
:/# echo "online_movable" > /sys/devices/system/memory/memory41/state
:/# echo "online_movable" > /sys/devices/system/memory/memory43/state
:/# cat /proc/zoneinfo
Node 1, zone Movable
spanned 98304
present 65536
managed 65536
:/# echo 0 > /sys/devices/system/memory/memory43/online
:/# cat /proc/zoneinfo
Node 1, zone Movable
spanned 32768
present 32768
managed 32768
:/# echo 0 > /sys/devices/system/memory/memory41/online
:/# cat /proc/zoneinfo
Node 1, zone Movable
spanned 0
present 0
managed 0
This patch (of 6):
The third argument is actually number of pages. Change the variable name
from size to nr_pages to indicate this better.
No functional change in this patch.
Link: http://lkml.kernel.org/r/20191006085646.5768-3-david@redhat.com
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Pankaj Gupta <pagupta@redhat.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: "Matthew Wilcox (Oracle)" <willy@infradead.org>
Cc: "Aneesh Kumar K.V" <aneesh.kumar@linux.ibm.com>
Cc: Pavel Tatashin <pasha.tatashin@soleen.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Logan Gunthorpe <logang@deltatee.com>
Cc: Oscar Salvador <osalvador@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Let's move it to the header and use the shorter variant from
mm/page_alloc.c (the original one will also check
"__highest_present_section_nr + 1", which is not necessary). While at
it, make the section_nr in next_pfn() const.
In next_pfn(), we now return section_nr_to_pfn(-1) instead of -1 once we
exceed __highest_present_section_nr, which doesn't make a difference in
the caller as it is big enough (>= all sane end_pfn).
Link: http://lkml.kernel.org/r/20200113144035.10848-3-david@redhat.com
Signed-off-by: David Hildenbrand <david@redhat.com>
Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Baoquan He <bhe@redhat.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: "Jin, Zhi" <zhi.jin@intel.com>
Cc: "Kirill A. Shutemov" <kirill@shutemov.name>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: Pavel Tatashin <pasha.tatashin@oracle.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Let's update the pfn manually whenever we continue the loop. This makes
the code easier to read but also less error prone (and we can directly fix
one issue).
When overlap_memmap_init() returns true, pfn is updated to
"memblock_region_memory_end_pfn(r)". So it already points at the *next*
pfn to process. Incrementing the pfn another time is wrong, we might
leave one uninitialized. I spotted this by inspecting the code, so I have
no idea if this is relevant in practise (with kernelcore=mirror).
Link: http://lkml.kernel.org/r/20200113144035.10848-2-david@redhat.com
Fixes: a9a9e77fbf27 ("mm: move mirrored memory specific code outside of memmap_init_zone")
Signed-off-by: David Hildenbrand <david@redhat.com>
Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Reviewed-by: Alexander Duyck <alexander.h.duyck@linux.intel.com>
Cc: Pavel Tatashin <pasha.tatashin@oracle.com>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: Kirill A. Shutemov <kirill@shutemov.name>
Cc: Baoquan He <bhe@redhat.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Mel Gorman <mgorman@suse.de>
Cc: "Jin, Zhi" <zhi.jin@intel.com>
Cc: Michal Hocko <mhocko@suse.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Let's make sure that all memory holes are actually marked PageReserved(),
that page_to_pfn() produces reliable results, and that these pages are not
detected as "mmap" pages due to the mapcount.
E.g., booting a x86-64 QEMU guest with 4160 MB:
[ 0.010585] Early memory node ranges
[ 0.010586] node 0: [mem 0x0000000000001000-0x000000000009efff]
[ 0.010588] node 0: [mem 0x0000000000100000-0x00000000bffdefff]
[ 0.010589] node 0: [mem 0x0000000100000000-0x0000000143ffffff]
max_pfn is 0x144000.
Before this change:
[root@localhost ~]# ./page-types -r -a 0x144000,
flags page-count MB symbolic-flags long-symbolic-flags
0x0000000000000800 16384 64 ___________M_______________________________ mmap
total 16384 64
After this change:
[root@localhost ~]# ./page-types -r -a 0x144000,
flags page-count MB symbolic-flags long-symbolic-flags
0x0000000100000000 16384 64 ___________________________r_______________ reserved
total 16384 64
IOW, especially the unavailable physical memory ("memory hole") in the
last section would not get properly marked PageReserved() and is indicated
to be "mmap" memory.
Drop the trace of that function from include/linux/mm.h - nobody else
needs it, and rename it accordingly.
Note: The fake zone/node might not be covered by the zone/node span. This
is not an urgent issue (for now, we had the same node/zone due to the
zeroing). We'll need a clean way to mark memory holes (e.g., using a page
type PageHole() if possible or a fake ZONE_INVALID) and eventually stop
marking these memory holes PageReserved().
Link: http://lkml.kernel.org/r/20191211163201.17179-4-david@redhat.com
Signed-off-by: David Hildenbrand <david@redhat.com>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Alexey Dobriyan <adobriyan@gmail.com>
Cc: Bob Picco <bob.picco@oracle.com>
Cc: Daniel Jordan <daniel.m.jordan@oracle.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Cc: Pavel Tatashin <pasha.tatashin@oracle.com>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Cc: Steven Sistare <steven.sistare@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
If max_pfn does not fall onto a section boundary, it is possible to
inspect PFNs up to max_pfn, and PFNs above max_pfn, however, max_pfn
itself can't be inspected. We can have a valid (and online) memmap at and
above max_pfn if max_pfn is not aligned to a section boundary. The whole
early section has a memmap and is marked online. Being able to inspect
the state of these PFNs is valuable for debugging, especially because
max_pfn can change on memory hotplug and expose these memmaps.
Also, querying page flags via "./page-types -r -a 0x144001,"
(tools/vm/page-types.c) inside a x86-64 guest with 4160MB under QEMU
results in an (almost) endless loop in user space, because the end is not
detected properly when starting after max_pfn.
Instead, let's allow to inspect all pages in the highest section and
return 0 directly if we try to access pages above that section.
While at it, check the count before adjusting it, to avoid masking user
errors.
Link: http://lkml.kernel.org/r/20191211163201.17179-3-david@redhat.com
Signed-off-by: David Hildenbrand <david@redhat.com>
Cc: Alexey Dobriyan <adobriyan@gmail.com>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Cc: Bob Picco <bob.picco@oracle.com>
Cc: Daniel Jordan <daniel.m.jordan@oracle.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Cc: Pavel Tatashin <pasha.tatashin@oracle.com>
Cc: Steven Sistare <steven.sistare@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Patch series "mm: fix max_pfn not falling on section boundary", v2.
Playing with different memory sizes for a x86-64 guest, I discovered that
some memmaps (highest section if max_mem does not fall on the section
boundary) are marked as being valid and online, but contain garbage. We
have to properly initialize these memmaps.
Looking at /proc/kpageflags and friends, I found some more issues,
partially related to this.
This patch (of 3):
If max_pfn is not aligned to a section boundary, we can easily run into
BUGs. This can e.g., be triggered on x86-64 under QEMU by specifying a
memory size that is not a multiple of 128MB (e.g., 4097MB, but also
4160MB). I was told that on real HW, we can easily have this scenario
(esp., one of the main reasons sub-section hotadd of devmem was added).
The issue is, that we have a valid memmap (pfn_valid()) for the whole
section, and the whole section will be marked "online".
pfn_to_online_page() will succeed, but the memmap contains garbage.
E.g., doing a "./page-types -r -a 0x144001" when QEMU was started with "-m
4160M" - (see tools/vm/page-types.c):
[ 200.476376] BUG: unable to handle page fault for address: fffffffffffffffe
[ 200.477500] #PF: supervisor read access in kernel mode
[ 200.478334] #PF: error_code(0x0000) - not-present page
[ 200.479076] PGD 59614067 P4D 59614067 PUD 59616067 PMD 0
[ 200.479557] Oops: 0000 [#4] SMP NOPTI
[ 200.479875] CPU: 0 PID: 603 Comm: page-types Tainted: G D W 5.5.0-rc1-next-20191209 #93
[ 200.480646] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.12.0-59-gc9ba5276e321-prebuilt.qemu4
[ 200.481648] RIP: 0010:stable_page_flags+0x4d/0x410
[ 200.482061] Code: f3 ff 41 89 c0 48 b8 00 00 00 00 01 00 00 00 45 84 c0 0f 85 cd 02 00 00 48 8b 53 08 48 8b 2b 48f
[ 200.483644] RSP: 0018:ffffb139401cbe60 EFLAGS: 00010202
[ 200.484091] RAX: fffffffffffffffe RBX: fffffbeec5100040 RCX: 0000000000000000
[ 200.484697] RDX: 0000000000000001 RSI: ffffffff9535c7cd RDI: 0000000000000246
[ 200.485313] RBP: ffffffffffffffff R08: 0000000000000000 R09: 0000000000000000
[ 200.485917] R10: 0000000000000000 R11: 0000000000000000 R12: 0000000000144001
[ 200.486523] R13: 00007ffd6ba55f48 R14: 00007ffd6ba55f40 R15: ffffb139401cbf08
[ 200.487130] FS: 00007f68df717580(0000) GS:ffff9ec77fa00000(0000) knlGS:0000000000000000
[ 200.487804] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 200.488295] CR2: fffffffffffffffe CR3: 0000000135d48000 CR4: 00000000000006f0
[ 200.488897] Call Trace:
[ 200.489115] kpageflags_read+0xe9/0x140
[ 200.489447] proc_reg_read+0x3c/0x60
[ 200.489755] vfs_read+0xc2/0x170
[ 200.490037] ksys_pread64+0x65/0xa0
[ 200.490352] do_syscall_64+0x5c/0xa0
[ 200.490665] entry_SYSCALL_64_after_hwframe+0x49/0xbe
But it can be triggered much easier via "cat /proc/kpageflags > /dev/null"
after cold/hot plugging a DIMM to such a system:
[root@localhost ~]# cat /proc/kpageflags > /dev/null
[ 111.517275] BUG: unable to handle page fault for address: fffffffffffffffe
[ 111.517907] #PF: supervisor read access in kernel mode
[ 111.518333] #PF: error_code(0x0000) - not-present page
[ 111.518771] PGD a240e067 P4D a240e067 PUD a2410067 PMD 0
This patch fixes that by at least zero-ing out that memmap (so e.g.,
page_to_pfn() will not crash). Commit 907ec5fca3dc ("mm: zero remaining
unavailable struct pages") tried to fix a similar issue, but forgot to
consider this special case.
After this patch, there are still problems to solve. E.g., not all of
these pages falling into a memory hole will actually get initialized later
and set PageReserved - they are only zeroed out - but at least the
immediate crashes are gone. A follow-up patch will take care of this.
Link: http://lkml.kernel.org/r/20191211163201.17179-2-david@redhat.com
Fixes: f7f99100d8d9 ("mm: stop zeroing memory during allocation in vmemmap")
Signed-off-by: David Hildenbrand <david@redhat.com>
Tested-by: Daniel Jordan <daniel.m.jordan@oracle.com>
Cc: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Cc: Pavel Tatashin <pasha.tatashin@oracle.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Steven Sistare <steven.sistare@oracle.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Daniel Jordan <daniel.m.jordan@oracle.com>
Cc: Bob Picco <bob.picco@oracle.com>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: Alexey Dobriyan <adobriyan@gmail.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Cc: <stable@vger.kernel.org> [4.15+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Writing a cloned file triggers a kernel oops and the user-space command
process is also killed by the system. The bug can be reproduced stably
via:
1) create a file under ocfs2 file system directory.
journalctl -b > aa.txt
2) create a cloned file for this file.
reflink aa.txt bb.txt
3) write the cloned file with dd command.
dd if=/dev/zero of=bb.txt bs=512 count=1 conv=notrunc
The dd command is killed by the kernel, then you can see the oops message
via dmesg command.
[ 463.875404] BUG: kernel NULL pointer dereference, address: 0000000000000028
[ 463.875413] #PF: supervisor read access in kernel mode
[ 463.875416] #PF: error_code(0x0000) - not-present page
[ 463.875418] PGD 0 P4D 0
[ 463.875425] Oops: 0000 [#1] SMP PTI
[ 463.875431] CPU: 1 PID: 2291 Comm: dd Tainted: G OE 5.3.16-2-default
[ 463.875433] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Bochs 01/01/2011
[ 463.875500] RIP: 0010:ocfs2_refcount_cow+0xa4/0x5d0 [ocfs2]
[ 463.875505] Code: 06 89 6c 24 38 89 eb f6 44 24 3c 02 74 be 49 8b 47 28
[ 463.875508] RSP: 0018:ffffa2cb409dfce8 EFLAGS: 00010202
[ 463.875512] RAX: ffff8b1ebdca8000 RBX: 0000000000000001 RCX: ffff8b1eb73a9df0
[ 463.875515] RDX: 0000000000056a01 RSI: 0000000000000000 RDI: 0000000000000000
[ 463.875517] RBP: 0000000000000001 R08: ffff8b1eb73a9de0 R09: 0000000000000000
[ 463.875520] R10: 0000000000000001 R11: 0000000000000000 R12: 0000000000000000
[ 463.875522] R13: ffff8b1eb922f048 R14: 0000000000000000 R15: ffff8b1eb922f048
[ 463.875526] FS: 00007f8f44d15540(0000) GS:ffff8b1ebeb00000(0000) knlGS:0000000000000000
[ 463.875529] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 463.875532] CR2: 0000000000000028 CR3: 000000003c17a000 CR4: 00000000000006e0
[ 463.875546] Call Trace:
[ 463.875596] ? ocfs2_inode_lock_full_nested+0x18b/0x960 [ocfs2]
[ 463.875648] ocfs2_file_write_iter+0xaf8/0xc70 [ocfs2]
[ 463.875672] new_sync_write+0x12d/0x1d0
[ 463.875688] vfs_write+0xad/0x1a0
[ 463.875697] ksys_write+0xa1/0xe0
[ 463.875710] do_syscall_64+0x60/0x1f0
[ 463.875743] entry_SYSCALL_64_after_hwframe+0x49/0xbe
[ 463.875758] RIP: 0033:0x7f8f4482ed44
[ 463.875762] Code: 00 f7 d8 64 89 02 48 c7 c0 ff ff ff ff eb b7 0f 1f 80 00 00 00
[ 463.875765] RSP: 002b:00007fff300a79d8 EFLAGS: 00000246 ORIG_RAX: 0000000000000001
[ 463.875769] RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007f8f4482ed44
[ 463.875771] RDX: 0000000000000200 RSI: 000055f771b5c000 RDI: 0000000000000001
[ 463.875774] RBP: 0000000000000200 R08: 00007f8f44af9c78 R09: 0000000000000003
[ 463.875776] R10: 000000000000089f R11: 0000000000000246 R12: 000055f771b5c000
[ 463.875779] R13: 0000000000000200 R14: 0000000000000000 R15: 000055f771b5c000
This regression problem was introduced by commit e74540b28556 ("ocfs2:
protect extent tree in ocfs2_prepare_inode_for_write()").
Link: http://lkml.kernel.org/r/20200121050153.13290-1-ghe@suse.com
Fixes: e74540b28556 ("ocfs2: protect extent tree in ocfs2_prepare_inode_for_write()").
Signed-off-by: Gang He <ghe@suse.com>
Reviewed-by: Joseph Qi <joseph.qi@linux.alibaba.com>
Cc: Mark Fasheh <mark@fasheh.com>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Junxiao Bi <junxiao.bi@oracle.com>
Cc: Changwei Ge <gechangwei@live.cn>
Cc: Jun Piao <piaojun@huawei.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Since commit ddd09bcc899f ("initramfs: make compression options not
depend on INITRAMFS_SOURCE"), Kconfig asks the compression mode for
the built-in initramfs regardless of INITRAMFS_SOURCE.
It is technically simpler, but pointless from a UI perspective,
Linus says [1].
When INITRAMFS_SOURCE is empty, usr/Makefile creates a tiny default
cpio, which is so small that nobody cares about the compression.
This commit hides the Kconfig choice in that case. The default cpio
is embedded without compression, which was the original behavior.
[1]: https://lkml.org/lkml/2020/2/1/160
Suggested-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
If CONFIG_MFD_SYSCON=n:
include/linux/mfd/syscon.h:54:23: warning: ‘syscon_regmap_lookup_by_phandle_args’ defined but not used [-Wunused-function]
Fix this by adding the missing inline keyword.
Fixes: 6a24f567af4accef ("mfd: syscon: Add arguments support for syscon reference")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
|
|
There was some logic added a while ago to clear out f_bavail in statfs()
if we did not have enough free metadata space to satisfy our global
reserve. This was incorrect at the time, however didn't really pose a
problem for normal file systems because we would often allocate chunks
if we got this low on free metadata space, and thus wouldn't really hit
this case unless we were actually full.
Fast forward to today and now we are much better about not allocating
metadata chunks all of the time. Couple this with d792b0f19711 ("btrfs:
always reserve our entire size for the global reserve") which now means
we'll easily have a larger global reserve than our free space, we are
now more likely to trip over this while still having plenty of space.
Fix this by skipping this logic if the global rsv's space_info is not
full. space_info->full is 0 unless we've attempted to allocate a chunk
for that space_info and that has failed. If this happens then the space
for the global reserve is definitely sacred and we need to report
b_avail == 0, but before then we can just use our calculated b_avail.
Reported-by: Martin Steigerwald <martin@lichtvoll.de>
Fixes: ca8a51b3a979 ("btrfs: statfs: report zero available if metadata are exhausted")
CC: stable@vger.kernel.org # 4.5+
Reviewed-by: Qu Wenruo <wqu@suse.com>
Tested-By: Martin Steigerwald <martin@lichtvoll.de>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
Anatoly Pugachev reported one of the y2038 patches to introduce
a fatal bug from a stupid typo:
[ 96.384129] watchdog: BUG: soft lockup - CPU#8 stuck for 22s!
...
[ 96.385624] [0000000000652ca4] handle_mm_fault+0x84/0x320
[ 96.385668] [0000000000b6f2bc] do_sparc64_fault+0x43c/0x820
[ 96.385720] [0000000000407754] sparc64_realfault_common+0x10/0x20
[ 96.385769] [000000000042fa28] __do_sys_sparc_clock_adjtime+0x28/0x80
[ 96.385819] [00000000004307f0] sys_sparc_clock_adjtime+0x10/0x20
[ 96.385866] [0000000000406294] linux_sparc_syscall+0x34/0x44
Fix the code to dereference the correct pointer again.
Reported-by: Anatoly Pugachev <matorola@gmail.com>
Tested-by: Anatoly Pugachev <matorola@gmail.com>
Fixes: 251ec1c159e4 ("y2038: sparc: remove use of struct timex")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Brown paperbag time: fetching ->i_uid/->i_mode really should've been
done from nd->inode. I even suggested that, but the reason for that has
slipped through the cracks and I went for dir->d_inode instead - made
for more "obvious" patch.
Analysis:
- at the entry into do_last() and all the way to step_into(): dir (aka
nd->path.dentry) is known not to have been freed; so's nd->inode and
it's equal to dir->d_inode unless we are already doomed to -ECHILD.
inode of the file to get opened is not known.
- after step_into(): inode of the file to get opened is known; dir
might be pointing to freed memory/be negative/etc.
- at the call of may_create_in_sticky(): guaranteed to be out of RCU
mode; inode of the file to get opened is known and pinned; dir might
be garbage.
The last was the reason for the original patch. Except that at the
do_last() entry we can be in RCU mode and it is possible that
nd->path.dentry->d_inode has already changed under us.
In that case we are going to fail with -ECHILD, but we need to be
careful; nd->inode is pointing to valid struct inode and it's the same
as nd->path.dentry->d_inode in "won't fail with -ECHILD" case, so we
should use that.
Reported-by: "Rantala, Tommi T. (Nokia - FI/Espoo)" <tommi.t.rantala@nokia.com>
Reported-by: syzbot+190005201ced78a74ad6@syzkaller.appspotmail.com
Wearing-brown-paperbag: Al Viro <viro@zeniv.linux.org.uk>
Cc: stable@kernel.org
Fixes: d0cb50185ae9 ("do_last(): fetch directory ->i_mode and ->i_uid before it's too late")
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
To 2.25
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
Don't instrument 3 more files that contain debugging facilities and
produce large amounts of uninteresting coverage for every syscall.
The following snippets are sprinkled all over the place in kcov traces
in a debugging kernel. We already try to disable instrumentation of
stack unwinding code and of most debug facilities. I guess we did not
use fault-inject.c at the time, and stacktrace.c was somehow missed (or
something has changed in kernel/configs). This change both speeds up
kcov (kernel doesn't need to store these PCs, user-space doesn't need to
process them) and frees trace buffer capacity for more useful coverage.
should_fail
lib/fault-inject.c:149
fail_dump
lib/fault-inject.c:45
stack_trace_save
kernel/stacktrace.c:124
stack_trace_consume_entry
kernel/stacktrace.c:86
stack_trace_consume_entry
kernel/stacktrace.c:89
... a hundred frames skipped ...
stack_trace_consume_entry
kernel/stacktrace.c:93
stack_trace_consume_entry
kernel/stacktrace.c:86
Link: http://lkml.kernel.org/r/20200116111449.217744-1-dvyukov@gmail.com
Signed-off-by: Dmitry Vyukov <dvyukov@google.com>
Reviewed-by: Andrey Konovalov <andreyknvl@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Use PHYS_PFN() macro in io_mapping_map_atomic_wc() instead of open coded
variant.
Link: http://lkml.kernel.org/r/20191209165624.56351-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
There were few episodes of silent downgrade to an executable stack over
years:
1) linking innocent looking assembly file will silently add executable
stack if proper linker options is not given as well:
$ cat f.S
.intel_syntax noprefix
.text
.globl f
f:
ret
$ cat main.c
void f(void);
int main(void)
{
f();
return 0;
}
$ gcc main.c f.S
$ readelf -l ./a.out
GNU_STACK 0x0000000000000000 0x0000000000000000 0x0000000000000000
0x0000000000000000 0x0000000000000000 RWE 0x10
^^^
2) converting C99 nested function into a closure
https://nullprogram.com/blog/2019/11/15/
void intsort2(int *base, size_t nmemb, _Bool invert)
{
int cmp(const void *a, const void *b)
{
int r = *(int *)a - *(int *)b;
return invert ? -r : r;
}
qsort(base, nmemb, sizeof(*base), cmp);
}
will silently require stack trampolines while non-closure version will
not.
Without doubt this behaviour is documented somewhere, add a warning so
that developers and users can at least notice. After so many years of
x86_64 having proper executable stack support it should not cause too
many problems.
Link: http://lkml.kernel.org/r/20191208171918.GC19716@avx2
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Cc: Dan Carpenter <dan.carpenter@oracle.com>
Cc: Will Deacon <will@kernel.org>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
The variable inode may be NULL in reiserfs_insert_item(), but there is
no check before accessing the member of inode.
Fix this by adding NULL pointer check before calling reiserfs_debug().
Link: http://lkml.kernel.org/r/79c5135d-ff25-1cc9-4e99-9f572b88cc00@huawei.com
Signed-off-by: Yunfeng Ye <yeyunfeng@huawei.com>
Cc: zhengbin <zhengbin13@huawei.com>
Cc: Hu Shiyuan <hushiyuan@huawei.com>
Cc: Feilong Lin <linfeilong@huawei.com>
Cc: Jan Kara <jack@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
This message leads to thinking that memory protection is not implemented
for the said architecture, whereas absence of CONFIG_STRICT_KERNEL_RWX
only means that memory protection has not been selected at compile time.
Don't print this message when CONFIG_ARCH_HAS_STRICT_KERNEL_RWX is
selected by the architecture. Instead, print "Kernel memory protection
not selected by kernel config."
Link: http://lkml.kernel.org/r/62477e446d9685459d4f27d193af6ff1bd69d55f.1578557581.git.christophe.leroy@c-s.fr
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Acked-by: Kees Cook <keescook@chromium.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Patch series "init/main.c: minor cleanup/bugfix of envvar handling", v2.
unknown_bootoption passes unrecognized command line arguments to init as
either environment variables or arguments. Some of the logic in the
function is broken for quoted command line arguments.
When an argument of the form param="value" is processed by parse_args
and passed to unknown_bootoption, the command line has
param\0"value\0
with val pointing to the beginning of value. The helper function
repair_env_string is then used to restore the '=' character that was
removed by parse_args, and strip the quotes off fully. This results in
param=value\0\0
and val ends up pointing to the 'a' instead of the 'v' in value. This
bug was introduced when repair_env_string was refactored into a separate
function, and the decrement of val in repair_env_string became dead
code.
This causes two problems in unknown_bootoption in the two places where
the val pointer is used as a substitute for the length of param:
1. An argument of the form param=".value" is misinterpreted as a
potential module parameter, with the result that it will not be
placed in init's environment.
2. An argument of the form param="value" is checked to see if param is
an existing environment variable that should be overwritten, but the
comparison is off-by-one and compares 'param=v' instead of 'param='
against the existing environment. So passing, for example,
TERM="vt100" on the command line results in init being passed both
TERM=linux and TERM=vt100 in its environment.
Patch 1 adds logging for the arguments and environment passed to init
and is independent of the rest: it can be dropped if this is
unnecessarily verbose.
Patch 2 removes repair_env_string from initcall parameter parsing in
do_initcall_level, as that uses a separate copy of the command line now
and the repairing is no longer necessary.
Patch 3 fixes the bug in unknown_bootoption by recording the length of
param explicitly instead of implying it from val-param.
This patch (of 3):
Commit a99cd1125189 ("init: fix bug where environment vars can't be
passed via boot args") introduced two minor bugs in unknown_bootoption
by factoring out the quoted value handling into a separate function.
When value is quoted, repair_env_string will move the value up 1 byte to
strip the quotes, so val in unknown_bootoption no longer points to the
actual location of the value.
The result is that an argument of the form param=".value" is mistakenly
treated as a potential module parameter and is not placed in init's
environment, and an argument of the form param="value" can result in a
duplicate environment variable: eg TERM="vt100" on the command line will
result in both TERM=linux and TERM=vt100 being placed into init's
environment.
Fix this by recording the length of the param before calling
repair_env_string instead of relying on val.
Link: http://lkml.kernel.org/r/20191212180023.24339-4-nivedita@alum.mit.edu
Signed-off-by: Arvind Sankar <nivedita@alum.mit.edu>
Cc: Chris Metcalf <cmetcalf@tilera.com>
Cc: Krzysztof Mazur <krzysiek@podlesie.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Since commit 08746a65c296 ("init: fix in-place parameter modification
regression"), parse_args in do_initcall_level is called on a copy of
saved_command_line. It is unnecessary to call repair_env_string during
this parsing, as this copy is not used for anything later.
Remove the now unnecessary arguments from repair_env_string as well.
Link: http://lkml.kernel.org/r/20191212180023.24339-3-nivedita@alum.mit.edu
Signed-off-by: Arvind Sankar <nivedita@alum.mit.edu>
Cc: Krzysztof Mazur <krzysiek@podlesie.net>
Cc: Chris Metcalf <cmetcalf@tilera.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Extend logging in `run_init_process` to also show the arguments and
environment that we are passing to init.
Link: http://lkml.kernel.org/r/20191212180023.24339-2-nivedita@alum.mit.edu
Signed-off-by: Arvind Sankar <nivedita@alum.mit.edu>
Cc: Chris Metcalf <cmetcalf@tilera.com>
Cc: Krzysztof Mazur <krzysiek@podlesie.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Unmapping whole address space at once with
munmap(0, (1ULL<<47) - 4096)
or equivalent will create empty coredump.
It is silly way to exit, however registers content may still be useful.
The right to coredump is fundamental right of a process!
Link: http://lkml.kernel.org/r/20191222150137.GA1277@avx2
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
array_size() macro will do overflow check anyway.
Link: http://lkml.kernel.org/r/20191222144009.GB24341@avx2
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Comment says ELF header is "too large to be on stack". 64 bytes on
64-bit is not large by any means.
Link: http://lkml.kernel.org/r/20191222143850.GA24341@avx2
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
If some mapping goes past TASK_SIZE it will be rejected by kernel which
means no such userspace binaries exist.
Mark every such check as unlikely.
Link: http://lkml.kernel.org/r/20191215124355.GA21124@avx2
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
"current->mm" pointer is stable in general except few cases one of which
execve(2). Compiler can't treat is as stable but it _is_ stable most of
the time. During ELF loading process ->mm becomes stable right after
flush_old_exec().
Help compiler by caching current->mm, otherwise it continues to refetch
it.
add/remove: 0/0 grow/shrink: 0/2 up/down: 0/-141 (-141)
Function old new delta
elf_core_dump 5062 5039 -23
load_elf_binary 5426 5308 -118
Note: other cases are left as is because it is either pessimisation or
no change in binary size.
Link: http://lkml.kernel.org/r/20191215124755.GB21124@avx2
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
ELF header is read into bprm->buf[] by generic execve code.
Save a memcpy and allocate just one header for the interpreter instead
of two headers (64 bytes instead of 128 on 64-bit).
Link: http://lkml.kernel.org/r/20191208171242.GA19716@avx2
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Only executable segments should be accounted to ->start_code just like
they do to ->end_code (correctly).
Link: http://lkml.kernel.org/r/20191208171410.GB19716@avx2
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Filling auxv vector as array with index (auxv[i++] = ...) generates
terrible code. "saved_auxv" should be reworked because it is the worst
member of mm_struct by size/usefullness ratio but do it later.
Meanwhile help gcc a little with *auxv++ idiom.
Space savings on x86_64:
add/remove: 0/0 grow/shrink: 0/1 up/down: 0/-127 (-127)
Function old new delta
load_elf_binary 5470 5343 -127
Link: http://lkml.kernel.org/r/20191208172301.GD19716@avx2
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
It saves 25% of .text for arm64, and more for BE architectures.
Before:
$ size lib/find_bit.o
text data bss dec hex filename
1012 56 0 1068 42c lib/find_bit.o
After:
$ size lib/find_bit.o
text data bss dec hex filename
776 56 0 832 340 lib/find_bit.o
Link: http://lkml.kernel.org/r/20200103202846.21616-3-yury.norov@gmail.com
Signed-off-by: Yury Norov <yury.norov@gmail.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Allison Randal <allison@lohutok.net>
Cc: William Breathitt Gray <vilhelm.gray@gmail.com>
Cc: Joe Perches <joe@perches.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
_find_next_bit and _find_next_bit_le are very similar functions. It's
possible to join them by adding 1 parameter and a couple of simple
checks. It's simplify maintenance and make possible to shrink the size
of .text by un-inlining the unified function (in the following patch).
Link: http://lkml.kernel.org/r/20200103202846.21616-2-yury.norov@gmail.com
Signed-off-by: Yury Norov <yury.norov@gmail.com>
Cc: Allison Randal <allison@lohutok.net>
Cc: Joe Perches <joe@perches.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: William Breathitt Gray <vilhelm.gray@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
ext2_swab() is defined locally in lib/find_bit.c However it is not
specific to ext2, neither to bitmaps.
There are many potential users of it, so rename it to just swab() and
move to include/uapi/linux/swab.h
ABI guarantees that size of unsigned long corresponds to BITS_PER_LONG,
therefore drop unneeded cast.
Link: http://lkml.kernel.org/r/20200103202846.21616-1-yury.norov@gmail.com
Signed-off-by: Yury Norov <yury.norov@gmail.com>
Cc: Allison Randal <allison@lohutok.net>
Cc: Joe Perches <joe@perches.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: William Breathitt Gray <vilhelm.gray@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Clang warns:
../lib/scatterlist.c:314:5: warning: misleading indentation; statement
is not part of the previous 'if' [-Wmisleading-indentation]
return -ENOMEM;
^
../lib/scatterlist.c:311:4: note: previous statement is here
if (prv)
^
1 warning generated.
This warning occurs because there is a space before the tab on this
line. Remove it so that the indentation is consistent with the Linux
kernel coding style and clang no longer warns.
Link: http://lkml.kernel.org/r/20191218033606.11942-1-natechancellor@gmail.com
Link: https://github.com/ClangBuiltLinux/linux/issues/830
Fixes: edce6820a9fd ("scatterlist: prevent invalid free when alloc fails")
Signed-off-by: Nathan Chancellor <natechancellor@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
In order to benefit from s390 zlib hardware compression support,
increase the btrfs zlib workspace buffer size from 1 to 4 pages (if s390
zlib hardware support is enabled on the machine).
This brings up to 60% better performance in hardware on s390 compared to
the PAGE_SIZE buffer and much more compared to the software zlib
processing in btrfs. In case of memory pressure, fall back to a single
page buffer during workspace allocation.
The data compressed with larger input buffers will still conform to zlib
standard and thus can be decompressed also on a systems that uses only
PAGE_SIZE buffer for btrfs zlib.
Link: http://lkml.kernel.org/r/20200108105103.29028-1-zaslonko@linux.ibm.com
Signed-off-by: Mikhail Zaslonko <zaslonko@linux.ibm.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Cc: Chris Mason <clm@fb.com>
Cc: Josef Bacik <josef@toxicpanda.com>
Cc: David Sterba <dsterba@suse.com>
Cc: Richard Purdie <rpurdie@rpsys.net>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Cc: Christian Borntraeger <borntraeger@de.ibm.com>
Cc: Eduard Shishkin <edward6@linux.ibm.com>
Cc: Ilya Leoshkevich <iii@linux.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Add a new function to zlib.h checking if s390 Deflate-Conversion
facility is installed and enabled.
Link: http://lkml.kernel.org/r/20200103223334.20669-6-zaslonko@linux.ibm.com
Signed-off-by: Mikhail Zaslonko <zaslonko@linux.ibm.com>
Cc: Chris Mason <clm@fb.com>
Cc: Christian Borntraeger <borntraeger@de.ibm.com>
Cc: David Sterba <dsterba@suse.com>
Cc: Eduard Shishkin <edward6@linux.ibm.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Ilya Leoshkevich <iii@linux.ibm.com>
Cc: Josef Bacik <josef@toxicpanda.com>
Cc: Richard Purdie <rpurdie@rpsys.net>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Add the new kernel command line parameter 'dfltcc=' to configure s390
zlib hardware support.
Format: { on | off | def_only | inf_only | always }
on: s390 zlib hardware support for compression on
level 1 and decompression (default)
off: No s390 zlib hardware support
def_only: s390 zlib hardware support for deflate
only (compression on level 1)
inf_only: s390 zlib hardware support for inflate
only (decompression)
always: Same as 'on' but ignores the selected compression
level always using hardware support (used for debugging)
Link: http://lkml.kernel.org/r/20200103223334.20669-5-zaslonko@linux.ibm.com
Signed-off-by: Mikhail Zaslonko <zaslonko@linux.ibm.com>
Cc: Chris Mason <clm@fb.com>
Cc: Christian Borntraeger <borntraeger@de.ibm.com>
Cc: David Sterba <dsterba@suse.com>
Cc: Eduard Shishkin <edward6@linux.ibm.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Ilya Leoshkevich <iii@linux.ibm.com>
Cc: Josef Bacik <josef@toxicpanda.com>
Cc: Richard Purdie <rpurdie@rpsys.net>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Add decompression functions to zlib_dfltcc library. Update zlib_inflate
functions with the hooks for s390 hardware support and adjust workspace
structures with extra parameter lists required for hardware inflate
decompression.
Link: http://lkml.kernel.org/r/20200103223334.20669-4-zaslonko@linux.ibm.com
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Signed-off-by: Mikhail Zaslonko <zaslonko@linux.ibm.com>
Co-developed-by: Ilya Leoshkevich <iii@linux.ibm.com>
Cc: Chris Mason <clm@fb.com>
Cc: Christian Borntraeger <borntraeger@de.ibm.com>
Cc: David Sterba <dsterba@suse.com>
Cc: Eduard Shishkin <edward6@linux.ibm.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Josef Bacik <josef@toxicpanda.com>
Cc: Richard Purdie <rpurdie@rpsys.net>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Change the conflicting macro name in preparation for zlib_inflate
hardware support.
Link: http://lkml.kernel.org/r/20200103223334.20669-3-zaslonko@linux.ibm.com
Signed-off-by: Mikhail Zaslonko <zaslonko@linux.ibm.com>
Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Patch series "S390 hardware support for kernel zlib", v3.
With IBM z15 mainframe the new DFLTCC instruction is available. It
implements deflate algorithm in hardware (Nest Acceleration Unit - NXU)
with estimated compression and decompression performance orders of
magnitude faster than the current zlib.
This patchset adds s390 hardware compression support to kernel zlib.
The code is based on the userspace zlib implementation:
https://github.com/madler/zlib/pull/410
The coding style is also preserved for future maintainability. There is
only limited set of userspace zlib functions represented in kernel.
Apart from that, all the memory allocation should be performed in
advance. Thus, the workarea structures are extended with the parameter
lists required for the DEFLATE CONVENTION CALL instruction.
Since kernel zlib itself does not support gzip headers, only Adler-32
checksum is processed (also can be produced by DFLTCC facility). Like
it was implemented for userspace, kernel zlib will compress in hardware
on level 1, and in software on all other levels. Decompression will
always happen in hardware (when enabled).
Two DFLTCC compression calls produce the same results only when they
both are made on machines of the same generation, and when the
respective buffers have the same offset relative to the start of the
page. Therefore care should be taken when using hardware compression
when reproducible results are desired. However it does always produce
the standard conform output which can be inflated anyway.
The new kernel command line parameter 'dfltcc' is introduced to
configure s390 zlib hardware support:
Format: { on | off | def_only | inf_only | always }
on: s390 zlib hardware support for compression on
level 1 and decompression (default)
off: No s390 zlib hardware support
def_only: s390 zlib hardware support for deflate
only (compression on level 1)
inf_only: s390 zlib hardware support for inflate
only (decompression)
always: Same as 'on' but ignores the selected compression
level always using hardware support (used for debugging)
The main purpose of the integration of the NXU support into the kernel
zlib is the use of hardware deflate in btrfs filesystem with on-the-fly
compression enabled. Apart from that, hardware support can also be used
during boot for decompressing the kernel or the ramdisk image
With the patch for btrfs expanding zlib buffer from 1 to 4 pages (patch
6) the following performance results have been achieved using the
ramdisk with btrfs. These are relative numbers based on throughput rate
and compression ratio for zlib level 1:
Input data Deflate rate Inflate rate Compression ratio
NXU/Software NXU/Software NXU/Software
stream of zeroes 1.46 1.02 1.00
random ASCII data 10.44 3.00 0.96
ASCII text (dickens) 6,21 3.33 0.94
binary data (vmlinux) 8,37 3.90 1.02
This means that s390 hardware deflate can provide up to 10 times faster
compression (on level 1) and up to 4 times faster decompression (refers
to all compression levels) for btrfs zlib.
Disclaimer: Performance results are based on IBM internal tests using DD
command-line utility on btrfs on a Fedora 30 based internal driver in
native LPAR on a z15 system. Results may vary based on individual
workload, configuration and software levels.
This patch (of 9):
Create zlib_dfltcc library with the s390 DEFLATE CONVERSION CALL
implementation and related compression functions. Update zlib_deflate
functions with the hooks for s390 hardware support and adjust workspace
structures with extra parameter lists required for hardware deflate.
Link: http://lkml.kernel.org/r/20200103223334.20669-2-zaslonko@linux.ibm.com
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Signed-off-by: Mikhail Zaslonko <zaslonko@linux.ibm.com>
Co-developed-by: Ilya Leoshkevich <iii@linux.ibm.com>
Cc: Chris Mason <clm@fb.com>
Cc: Christian Borntraeger <borntraeger@de.ibm.com>
Cc: David Sterba <dsterba@suse.com>
Cc: Eduard Shishkin <edward6@linux.ibm.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Josef Bacik <josef@toxicpanda.com>
Cc: Richard Purdie <rpurdie@rpsys.net>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
This switches the qcom-vadc-common to use milli_kelvin_to_millicelsius()
in <linux/units.h>.
Link: http://lkml.kernel.org/r/1576386975-7941-13-git-send-email-akinobu.mita@gmail.com
Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com>
Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Cc: Hartmut Knaack <knaack.h@gmx.de>
Cc: Lars-Peter Clausen <lars@metafoo.de>
Cc: Peter Meerwald-Stadler <pmeerw@pmeerw.net>
Cc: Amit Kucheria <amit.kucheria@verdurent.com>
Cc: Andy Shevchenko <andy@infradead.org>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Daniel Lezcano <daniel.lezcano@linaro.org>
Cc: Darren Hart <dvhart@infradead.org>
Cc: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Cc: Guenter Roeck <linux@roeck-us.net>
Cc: Jean Delvare <jdelvare@suse.com>
Cc: Jens Axboe <axboe@fb.com>
Cc: Johannes Berg <johannes.berg@intel.com>
Cc: Jonathan Cameron <jic23@kernel.org>
Cc: Kalle Valo <kvalo@codeaurora.org>
Cc: Keith Busch <kbusch@kernel.org>
Cc: Luca Coelho <luciano.coelho@intel.com>
Cc: Sagi Grimberg <sagi@grimberg.me>
Cc: Stanislaw Gruszka <sgruszka@redhat.com>
Cc: Sujith Thomas <sujith.thomas@intel.com>
Cc: Zhang Rui <rui.zhang@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
This removes unused TO_MCELSIUS() macro.
Link: http://lkml.kernel.org/r/1576386975-7941-12-git-send-email-akinobu.mita@gmail.com
Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Cc: Zhang Rui <rui.zhang@intel.com>
Cc: Daniel Lezcano <daniel.lezcano@linaro.org>
Cc: Amit Kucheria <amit.kucheria@verdurent.com>
Cc: Andy Shevchenko <andy@infradead.org>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Darren Hart <dvhart@infradead.org>
Cc: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Cc: Guenter Roeck <linux@roeck-us.net>
Cc: Hartmut Knaack <knaack.h@gmx.de>
Cc: Jean Delvare <jdelvare@suse.com>
Cc: Jens Axboe <axboe@fb.com>
Cc: Johannes Berg <johannes.berg@intel.com>
Cc: Jonathan Cameron <jic23@kernel.org>
Cc: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Cc: Kalle Valo <kvalo@codeaurora.org>
Cc: Keith Busch <kbusch@kernel.org>
Cc: Lars-Peter Clausen <lars@metafoo.de>
Cc: Luca Coelho <luciano.coelho@intel.com>
Cc: Peter Meerwald-Stadler <pmeerw@pmeerw.net>
Cc: Sagi Grimberg <sagi@grimberg.me>
Cc: Stanislaw Gruszka <sgruszka@redhat.com>
Cc: Sujith Thomas <sujith.thomas@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
This switches the iwlwifi driver to use celsius_to_kelvin() and
kelvin_to_celsius() in <linux/units.h>.
Link: http://lkml.kernel.org/r/1576386975-7941-11-git-send-email-akinobu.mita@gmail.com
Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Acked-by: Luca Coelho <luciano.coelho@intel.com>
Cc: Kalle Valo <kvalo@codeaurora.org>
Cc: Johannes Berg <johannes.berg@intel.com>
Cc: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Cc: Luca Coelho <luciano.coelho@intel.com>
Cc: Amit Kucheria <amit.kucheria@verdurent.com>
Cc: Andy Shevchenko <andy@infradead.org>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Daniel Lezcano <daniel.lezcano@linaro.org>
Cc: Darren Hart <dvhart@infradead.org>
Cc: Guenter Roeck <linux@roeck-us.net>
Cc: Hartmut Knaack <knaack.h@gmx.de>
Cc: Jean Delvare <jdelvare@suse.com>
Cc: Jens Axboe <axboe@fb.com>
Cc: Jonathan Cameron <jic23@kernel.org>
Cc: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Cc: Keith Busch <kbusch@kernel.org>
Cc: Lars-Peter Clausen <lars@metafoo.de>
Cc: Peter Meerwald-Stadler <pmeerw@pmeerw.net>
Cc: Sagi Grimberg <sagi@grimberg.me>
Cc: Stanislaw Gruszka <sgruszka@redhat.com>
Cc: Sujith Thomas <sujith.thomas@intel.com>
Cc: Zhang Rui <rui.zhang@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
This switches the iwlegacy driver to use celsius_to_kelvin() and
kelvin_to_celsius() in <linux/units.h>.
[akinobu.mita@gmail.com: fix build warnings with format string]
Link: http://lkml.kernel.org/r/1579014483-9226-1-git-send-email-akinobu.mita@gmail.com
Link: https://lore.kernel.org/r/20200106171452.201c3b4c@canb.auug.org.au
Link: http://lkml.kernel.org/r/1576386975-7941-10-git-send-email-akinobu.mita@gmail.com
Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Acked-by: Kalle Valo <kvalo@codeaurora.org>
Cc: Kalle Valo <kvalo@codeaurora.org>
Cc: Stanislaw Gruszka <sgruszka@redhat.com>
Cc: Amit Kucheria <amit.kucheria@verdurent.com>
Cc: Andy Shevchenko <andy@infradead.org>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Daniel Lezcano <daniel.lezcano@linaro.org>
Cc: Darren Hart <dvhart@infradead.org>
Cc: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Cc: Guenter Roeck <linux@roeck-us.net>
Cc: Hartmut Knaack <knaack.h@gmx.de>
Cc: Jean Delvare <jdelvare@suse.com>
Cc: Jens Axboe <axboe@fb.com>
Cc: Johannes Berg <johannes.berg@intel.com>
Cc: Jonathan Cameron <jic23@kernel.org>
Cc: Keith Busch <kbusch@kernel.org>
Cc: Lars-Peter Clausen <lars@metafoo.de>
Cc: Luca Coelho <luciano.coelho@intel.com>
Cc: Peter Meerwald-Stadler <pmeerw@pmeerw.net>
Cc: Sagi Grimberg <sagi@grimberg.me>
Cc: Sujith Thomas <sujith.thomas@intel.com>
Cc: Zhang Rui <rui.zhang@intel.com>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
This removes the kelvin to/from Celsius conversion helper macros in
<linux/thermal.h> which were switched to the inline helper functions in
<linux/units.h>.
Link: http://lkml.kernel.org/r/1576386975-7941-9-git-send-email-akinobu.mita@gmail.com
Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Cc: Sujith Thomas <sujith.thomas@intel.com>
Cc: Darren Hart <dvhart@infradead.org>
Cc: Andy Shevchenko <andy@infradead.org>
Cc: Zhang Rui <rui.zhang@intel.com>
Cc: Daniel Lezcano <daniel.lezcano@linaro.org>
Cc: Amit Kucheria <amit.kucheria@verdurent.com>
Cc: Jean Delvare <jdelvare@suse.com>
Cc: Guenter Roeck <linux@roeck-us.net>
Cc: Keith Busch <kbusch@kernel.org>
Cc: Jens Axboe <axboe@fb.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Sagi Grimberg <sagi@grimberg.me>
Cc: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Cc: Hartmut Knaack <knaack.h@gmx.de>
Cc: Johannes Berg <johannes.berg@intel.com>
Cc: Jonathan Cameron <jic23@kernel.org>
Cc: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Cc: Kalle Valo <kvalo@codeaurora.org>
Cc: Lars-Peter Clausen <lars@metafoo.de>
Cc: Luca Coelho <luciano.coelho@intel.com>
Cc: Peter Meerwald-Stadler <pmeerw@pmeerw.net>
Cc: Stanislaw Gruszka <sgruszka@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
This switches the nvme driver to use kelvin_to_millicelsius() and
millicelsius_to_kelvin() in <linux/units.h>.
Link: http://lkml.kernel.org/r/1576386975-7941-8-git-send-email-akinobu.mita@gmail.com
Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Cc: Sujith Thomas <sujith.thomas@intel.com>
Cc: Darren Hart <dvhart@infradead.org>
Cc: Andy Shevchenko <andy@infradead.org>
Cc: Zhang Rui <rui.zhang@intel.com>
Cc: Daniel Lezcano <daniel.lezcano@linaro.org>
Cc: Amit Kucheria <amit.kucheria@verdurent.com>
Cc: Jean Delvare <jdelvare@suse.com>
Cc: Guenter Roeck <linux@roeck-us.net>
Cc: Keith Busch <kbusch@kernel.org>
Cc: Jens Axboe <axboe@fb.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Sagi Grimberg <sagi@grimberg.me>
Cc: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Cc: Hartmut Knaack <knaack.h@gmx.de>
Cc: Johannes Berg <johannes.berg@intel.com>
Cc: Jonathan Cameron <jic23@kernel.org>
Cc: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Cc: Kalle Valo <kvalo@codeaurora.org>
Cc: Lars-Peter Clausen <lars@metafoo.de>
Cc: Luca Coelho <luciano.coelho@intel.com>
Cc: Peter Meerwald-Stadler <pmeerw@pmeerw.net>
Cc: Stanislaw Gruszka <sgruszka@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
This switches the intel pch thermal driver to use
deci_kelvin_to_millicelsius() in <linux/units.h> instead of helpers in
<linux/thermal.h>.
This is preparation for centralizing the kelvin to/from Celsius
conversion helpers in <linux/units.h>.
Link: http://lkml.kernel.org/r/1576386975-7941-7-git-send-email-akinobu.mita@gmail.com
Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Cc: Sujith Thomas <sujith.thomas@intel.com>
Cc: Darren Hart <dvhart@infradead.org>
Cc: Andy Shevchenko <andy@infradead.org>
Cc: Zhang Rui <rui.zhang@intel.com>
Cc: Daniel Lezcano <daniel.lezcano@linaro.org>
Cc: Amit Kucheria <amit.kucheria@verdurent.com>
Cc: Jean Delvare <jdelvare@suse.com>
Cc: Guenter Roeck <linux@roeck-us.net>
Cc: Keith Busch <kbusch@kernel.org>
Cc: Jens Axboe <axboe@fb.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Sagi Grimberg <sagi@grimberg.me>
Cc: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Cc: Hartmut Knaack <knaack.h@gmx.de>
Cc: Johannes Berg <johannes.berg@intel.com>
Cc: Jonathan Cameron <jic23@kernel.org>
Cc: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Cc: Kalle Valo <kvalo@codeaurora.org>
Cc: Lars-Peter Clausen <lars@metafoo.de>
Cc: Luca Coelho <luciano.coelho@intel.com>
Cc: Peter Meerwald-Stadler <pmeerw@pmeerw.net>
Cc: Stanislaw Gruszka <sgruszka@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
This switches the int340x thermal zone driver to use
deci_kelvin_to_millicelsius() and millicelsius_to_deci_kelvin() in
<linux/units.h> instead of helpers in <linux/thermal.h>.
This is preparation for centralizing the kelvin to/from Celsius
conversion helpers in <linux/units.h>.
Link: http://lkml.kernel.org/r/1576386975-7941-6-git-send-email-akinobu.mita@gmail.com
Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Cc: Sujith Thomas <sujith.thomas@intel.com>
Cc: Darren Hart <dvhart@infradead.org>
Cc: Andy Shevchenko <andy@infradead.org>
Cc: Zhang Rui <rui.zhang@intel.com>
Cc: Daniel Lezcano <daniel.lezcano@linaro.org>
Cc: Amit Kucheria <amit.kucheria@verdurent.com>
Cc: Jean Delvare <jdelvare@suse.com>
Cc: Guenter Roeck <linux@roeck-us.net>
Cc: Keith Busch <kbusch@kernel.org>
Cc: Jens Axboe <axboe@fb.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Sagi Grimberg <sagi@grimberg.me>
Cc: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Cc: Hartmut Knaack <knaack.h@gmx.de>
Cc: Johannes Berg <johannes.berg@intel.com>
Cc: Jonathan Cameron <jic23@kernel.org>
Cc: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Cc: Kalle Valo <kvalo@codeaurora.org>
Cc: Lars-Peter Clausen <lars@metafoo.de>
Cc: Luca Coelho <luciano.coelho@intel.com>
Cc: Peter Meerwald-Stadler <pmeerw@pmeerw.net>
Cc: Stanislaw Gruszka <sgruszka@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
This switches the intel_menlow driver to use deci_kelvin_to_celsius()
and celsius_to_deci_kelvin() in <linux/units.h> instead of helpers in
<linux/thermal.h>.
This is preparation for centralizing the kelvin to/from Celsius
conversion helpers in <linux/units.h>.
This also removes a trailing space, while we're at it.
Link: http://lkml.kernel.org/r/1576386975-7941-5-git-send-email-akinobu.mita@gmail.com
Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Cc: Sujith Thomas <sujith.thomas@intel.com>
Cc: Darren Hart <dvhart@infradead.org>
Cc: Andy Shevchenko <andy@infradead.org>
Cc: Zhang Rui <rui.zhang@intel.com>
Cc: Daniel Lezcano <daniel.lezcano@linaro.org>
Cc: Amit Kucheria <amit.kucheria@verdurent.com>
Cc: Jean Delvare <jdelvare@suse.com>
Cc: Guenter Roeck <linux@roeck-us.net>
Cc: Keith Busch <kbusch@kernel.org>
Cc: Jens Axboe <axboe@fb.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Sagi Grimberg <sagi@grimberg.me>
Cc: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Cc: Hartmut Knaack <knaack.h@gmx.de>
Cc: Johannes Berg <johannes.berg@intel.com>
Cc: Jonathan Cameron <jic23@kernel.org>
Cc: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Cc: Kalle Valo <kvalo@codeaurora.org>
Cc: Lars-Peter Clausen <lars@metafoo.de>
Cc: Luca Coelho <luciano.coelho@intel.com>
Cc: Peter Meerwald-Stadler <pmeerw@pmeerw.net>
Cc: Stanislaw Gruszka <sgruszka@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
The asus-wmi driver doesn't implement the thermal device functionality
directly, so including <linux/thermal.h> just for
DECI_KELVIN_TO_CELSIUS() is a bit odd.
This switches the asus-wmi driver to use deci_kelvin_to_millicelsius()
in <linux/units.h>.
The format string is changed from %d to %ld due to function returned
type.
Link: http://lkml.kernel.org/r/1576386975-7941-4-git-send-email-akinobu.mita@gmail.com
Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com>
Acked-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Cc: Sujith Thomas <sujith.thomas@intel.com>
Cc: Darren Hart <dvhart@infradead.org>
Cc: Andy Shevchenko <andy@infradead.org>
Cc: Zhang Rui <rui.zhang@intel.com>
Cc: Daniel Lezcano <daniel.lezcano@linaro.org>
Cc: Amit Kucheria <amit.kucheria@verdurent.com>
Cc: Jean Delvare <jdelvare@suse.com>
Cc: Guenter Roeck <linux@roeck-us.net>
Cc: Keith Busch <kbusch@kernel.org>
Cc: Jens Axboe <axboe@fb.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Sagi Grimberg <sagi@grimberg.me>
Cc: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Cc: Hartmut Knaack <knaack.h@gmx.de>
Cc: Johannes Berg <johannes.berg@intel.com>
Cc: Jonathan Cameron <jic23@kernel.org>
Cc: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Cc: Kalle Valo <kvalo@codeaurora.org>
Cc: Lars-Peter Clausen <lars@metafoo.de>
Cc: Luca Coelho <luciano.coelho@intel.com>
Cc: Peter Meerwald-Stadler <pmeerw@pmeerw.net>
Cc: Stanislaw Gruszka <sgruszka@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
This switches the ACPI thermal zone driver to use
celsius_to_deci_kelvin(), deci_kelvin_to_celsius(), and
deci_kelvin_to_millicelsius_with_offset() in <linux/units.h> instead of
helpers in <linux/thermal.h>.
This is preparation for centralizing the kelvin to/from Celsius
conversion helpers in <linux/units.h>.
Link: http://lkml.kernel.org/r/1576386975-7941-3-git-send-email-akinobu.mita@gmail.com
Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com>
Cc: Sujith Thomas <sujith.thomas@intel.com>
Cc: Darren Hart <dvhart@infradead.org>
Cc: Andy Shevchenko <andy@infradead.org>
Cc: Zhang Rui <rui.zhang@intel.com>
Cc: Daniel Lezcano <daniel.lezcano@linaro.org>
Cc: Amit Kucheria <amit.kucheria@verdurent.com>
Cc: Jean Delvare <jdelvare@suse.com>
Cc: Guenter Roeck <linux@roeck-us.net>
Cc: Keith Busch <kbusch@kernel.org>
Cc: Jens Axboe <axboe@fb.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Sagi Grimberg <sagi@grimberg.me>
Cc: Andy Shevchenko <andy.shevchenko@gmail.com>
Cc: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Cc: Hartmut Knaack <knaack.h@gmx.de>
Cc: Johannes Berg <johannes.berg@intel.com>
Cc: Jonathan Cameron <jic23@kernel.org>
Cc: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Cc: Kalle Valo <kvalo@codeaurora.org>
Cc: Lars-Peter Clausen <lars@metafoo.de>
Cc: Luca Coelho <luciano.coelho@intel.com>
Cc: Peter Meerwald-Stadler <pmeerw@pmeerw.net>
Cc: Stanislaw Gruszka <sgruszka@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
Aneesh Kumar K.V
David Hildenbrand
Gang He
Masahiro Yamada
Geert Uytterhoeven
Josef Bacik
Arnd Bergmann
Al Viro
Steve French
Dmitry Vyukov
Andy Shevchenko
Alexey Dobriyan
Yunfeng Ye
Christophe Leroy
Arvind Sankar
Yury Norov
Nathan Chancellor
Mikhail Zaslonko
Akinobu Mita