| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
For delays longer than 20ms [um]delay isn't recommended.
pm80xx_chip_soft_rst starts off with a 500ms delay before it even gets
around to checking for the results of the reset. As long as it's at least
500ms it doesn't matter what the scheduler is doing. The delay in the
pm8001_exec_internal_task_abort does nothing, and theory is this is a delay
to avoid a double-free.
Link: https://lore.kernel.org/r/20191114100910.6153-5-deepak.ukey@microchip.com
Acked-by: Jack Wang <jinpu.wang@cloud.ionos.com>
Signed-off-by: Vikram Auradkar <auradkar@google.com>
Signed-off-by: Deepak Ukey <deepak.ukey@microchip.com>
Signed-off-by: Viswas G <Viswas.G@microchip.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
In pm8001_task_exec(), if the PHY is down, then we return the current value
of 'rc'. We need to make sure it's initialized.
Link: https://lore.kernel.org/r/20191114100910.6153-4-deepak.ukey@microchip.com
Acked-by: Jack Wang <jinpu.wang@cloud.ionos.com>
Signed-off-by: John Sperbeck <jsperbeck@google.com>
Signed-off-by: Deepak Ukey <deepak.ukey@microchip.com>
Signed-off-by: Viswas G <Viswas.G@microchip.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
After the completing the mpi_phy_start_resp, make phy enable completion as
NULL.
Link: https://lore.kernel.org/r/20191114100910.6153-3-deepak.ukey@microchip.com
Acked-by: Jack Wang <jinpu.wang@cloud.ionos.com>
Signed-off-by: peter chang <dpf@google.com>
Signed-off-by: Deepak Ukey <deepak.ukey@microchip.com>
Signed-off-by: Viswas G <Viswas.G@microchip.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Driver was missing complete() call in mpi_sata_completion which result in
SATA abort error handling timing out. That causes the device to be left in
the in_recovery state so subsequent commands sent to the device fail and
the OS removes access to it.
Link: https://lore.kernel.org/r/20191114100910.6153-2-deepak.ukey@microchip.com
Acked-by: Jack Wang <jinpu.wang@cloud.ionos.com>
Signed-off-by: peter chang <dpf@google.com>
Signed-off-by: Deepak Ukey <deepak.ukey@microchip.com>
Signed-off-by: Viswas G <Viswas.G@microchip.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
During clock gating (ufshcd_gate_work()), we first put the link hibern8 by
calling ufshcd_uic_hibern8_enter() and if ufshcd_uic_hibern8_enter()
returns success (0) then we gate all the clocks. Now let’s zoom in to what
ufshcd_uic_hibern8_enter() does internally: It calls
__ufshcd_uic_hibern8_enter() and if failure is encountered, link recovery
shall put the link back to the highest HS gear and returns success (0) to
ufshcd_uic_hibern8_enter() which is the issue as link is still in active
state due to recovery! Now ufshcd_uic_hibern8_enter() returns success to
ufshcd_gate_work() and hence it goes ahead with gating the UFS clock while
link is still in active state hence I believe controller would raise UIC
error interrupts. But when we service the interrupt, clocks might have
already been disabled!
This change fixes for this by returning failure from
__ufshcd_uic_hibern8_enter() if recovery succeeds as link is still not in
hibern8, upon receiving the error ufshcd_hibern8_enter() would initiate
retry to put the link state back into hibern8.
Link: https://lore.kernel.org/r/1573798172-20534-8-git-send-email-cang@codeaurora.org
Reviewed-by: Avri Altman <avri.altman@wdc.com>
Reviewed-by: Bean Huo <beanhuo@micron.com>
Signed-off-by: Subhash Jadavani <subhashj@codeaurora.org>
Signed-off-by: Can Guo <cang@codeaurora.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
This change attempts to abort gating of clocks if a request to turn-on
clocks is pending. This would in turn avoid turning OFF and back ON the
clocks.
Link: https://lore.kernel.org/r/1573798172-20534-7-git-send-email-cang@codeaurora.org
Reviewed-by: Bean Huo <beanhuo@micron.com>
Signed-off-by: Asutosh Das <asutoshd@codeaurora.org>
Signed-off-by: Can Guo <cang@codeaurora.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Return IRQ_HANDLED only if the irq is really handled, this will help in
catching spurious interrupts that go unhandled.
Link: https://lore.kernel.org/r/1573798172-20534-6-git-send-email-cang@codeaurora.org
Reviewed-by: Avri Altman <avri.altman@wdc.com>
Signed-off-by: Venkat Gopalakrishnan <venkatg@codeaurora.org>
Signed-off-by: Can Guo <cang@codeaurora.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
ufshcd_print_host_regs() can be called by interrupt handler, but it may
sleep due to ufshcd_dump_regs() allocates the dump buffer memory with flag
GFP_KERNEL. Fix it by changing GFP_KERNEL to GFP_ATMOIC.
Link: https://lore.kernel.org/r/1573798172-20534-5-git-send-email-cang@codeaurora.org
Reviewed-by: Bean Huo <beanhuo@micron.com>
Signed-off-by: Can Guo <cang@codeaurora.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Fix up possible unclocked register access to auto hibern8 register in
resume path and through sysfs entry. Meanwhile, enable auto hibern8 only
after device is fully initialized in probe path.
Link: https://lore.kernel.org/r/1573798172-20534-4-git-send-email-cang@codeaurora.org
Reviewed-by: Stanley Chu <stanley.chu@mediatek.com>
Signed-off-by: Can Guo <cang@codeaurora.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Add reset control for host controller so that host controller can be reset
as required in its power up sequence.
Link: https://lore.kernel.org/r/1573798172-20534-3-git-send-email-cang@codeaurora.org
Reviewed-by: Avri Altman <avri.altman@wdc.com>
Signed-off-by: Can Guo <cang@codeaurora.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
In order to recover from hibern8 exit failure, perform a reset in link
recovery path before issuing link start-up.
Link: https://lore.kernel.org/r/1573798172-20534-2-git-send-email-cang@codeaurora.org
Reviewed-by: Bean Huo <beanhuo@micron.com>
Reviewed-by: Stanley Chu <stanley.chu@mediatek.com>
Signed-off-by: Can Guo <cang@codeaurora.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Remove SG_NONE and a related misleading comment. Update documentation.
This patch does not affect behaviour as zero initialization is redundant.
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Viresh Kumar <vireshk@kernel.org>
Cc: Oliver Neukum <oneukum@suse.com>
Cc: Alan Stern <stern@rowland.harvard.edu>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: usb-storage@lists.one-eyed-alien.net
Link: https://lore.kernel.org/r/b4779b7a6563f6bd8d259ee457871c1c463c420e.1572656814.git.fthain@telegraphics.com.au
Signed-off-by: Finn Thain <fthain@telegraphics.com.au>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Since the scsi subsystem adopted the blk-mq API, a host with zero
sg_tablesize crashes with a NULL pointer dereference.
blk_queue_max_segments: set to minimum 1
scsi 0:0:0:0: Direct-Access QEMU QEMU HARDDISK 2.5+ PQ: 0 ANSI: 5
scsi target0:0:0: Beginning Domain Validation
scsi target0:0:0: Domain Validation skipping write tests
scsi target0:0:0: Ending Domain Validation
blk_queue_max_segments: set to minimum 1
scsi 0:0:1:0: Direct-Access QEMU QEMU HARDDISK 2.5+ PQ: 0 ANSI: 5
scsi target0:0:1: Beginning Domain Validation
scsi target0:0:1: Domain Validation skipping write tests
scsi target0:0:1: Ending Domain Validation
blk_queue_max_segments: set to minimum 1
scsi 0:0:2:0: CD-ROM QEMU QEMU CD-ROM 2.5+ PQ: 0 ANSI: 5
scsi target0:0:2: Beginning Domain Validation
scsi target0:0:2: Domain Validation skipping write tests
scsi target0:0:2: Ending Domain Validation
blk_queue_max_segments: set to minimum 1
blk_queue_max_segments: set to minimum 1
blk_queue_max_segments: set to minimum 1
blk_queue_max_segments: set to minimum 1
sr 0:0:2:0: Power-on or device reset occurred
sd 0:0:0:0: Power-on or device reset occurred
sd 0:0:1:0: Power-on or device reset occurred
sd 0:0:0:0: [sda] 10485762 512-byte logical blocks: (5.37 GB/5.00 GiB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
Unable to handle kernel NULL pointer dereference at virtual address (ptrval)
Oops: 00000000
Modules linked in:
PC: [<001cd874>] blk_mq_free_request+0x66/0xe2
SR: 2004 SP: (ptrval) a2: 00874520
d0: 00000000 d1: 00000000 d2: 009ba800 d3: 00000000
d4: 00000000 d5: 08000002 a0: 0087be68 a1: 009a81e0
Process kworker/u2:2 (pid: 15, task=(ptrval))
Frame format=7 eff addr=0000007a ssw=0505 faddr=0000007a
wb 1 stat/addr/data: 0000 00000000 00000000
wb 2 stat/addr/data: 0000 00000000 00000000
wb 3 stat/addr/data: 0000 0000007a 00000000
push data: 00000000 00000000 00000000 00000000
Stack from 0087bd98:
00000002 00000000 0087be72 009a7820 0087bdb4 001c4f6c 009a7820 0087bdd4
0024d200 009a7820 0024d0dc 0087be72 009baa00 0087be68 009a5000 0087be7c
00265d10 009a5000 0087be72 00000003 00000000 00000000 00000000 0087be68
00000bb8 00000005 00000000 00000000 00000000 00000000 00265c56 00000000
009ba60c 0036ddf4 00000002 ffffffff 009baa00 009ba600 009a50d6 0087be74
00227ba0 009baa08 00000001 009baa08 009ba60c 0036ddf4 00000000 00000000
Call Trace: [<001c4f6c>] blk_put_request+0xe/0x14
[<0024d200>] __scsi_execute+0x124/0x174
[<0024d0dc>] __scsi_execute+0x0/0x174
[<00265d10>] sd_revalidate_disk+0xba/0x1f02
[<00265c56>] sd_revalidate_disk+0x0/0x1f02
[<0036ddf4>] strlen+0x0/0x22
[<00227ba0>] device_add+0x3da/0x604
[<0036ddf4>] strlen+0x0/0x22
[<00267e64>] sd_probe+0x30c/0x4b4
[<0002da44>] process_one_work+0x0/0x402
[<0022b978>] really_probe+0x226/0x354
[<0022bc34>] driver_probe_device+0xa4/0xf0
[<0002da44>] process_one_work+0x0/0x402
[<0022bcd0>] __driver_attach_async_helper+0x50/0x70
[<00035dae>] async_run_entry_fn+0x36/0x130
[<0002db88>] process_one_work+0x144/0x402
[<0002e1aa>] worker_thread+0x0/0x570
[<0002e29a>] worker_thread+0xf0/0x570
[<0002e1aa>] worker_thread+0x0/0x570
[<003768d8>] schedule+0x0/0xb8
[<0003f58c>] __init_waitqueue_head+0x0/0x12
[<00033e92>] kthread+0xc2/0xf6
[<000331e8>] kthread_parkme+0x0/0x4e
[<003768d8>] schedule+0x0/0xb8
[<00033dd0>] kthread+0x0/0xf6
[<00002c10>] ret_from_kernel_thread+0xc/0x14
Code: 0280 0006 0800 56c0 4400 0280 0000 00ff <52b4> 0c3a 082b 0006 0013 6706 2042 53a8 00c4 4ab9 0047 3374 6640 202d 000c 670c
Disabling lock debugging due to kernel taint
Avoid this by setting sg_tablesize = 1.
Link: https://lore.kernel.org/r/4567bcae94523b47d6f3b77450ba305823bca479.1572656814.git.fthain@telegraphics.com.au
Reported-and-tested-by: Michael Schmitz <schmitzmic@gmail.com>
Reviewed-by: Michael Schmitz <schmitzmic@gmail.com>
References: commit 68ab2d76e4be ("scsi: cxlflash: Set sg_tablesize to 1 instead of SG_NONE")
Signed-off-by: Finn Thain <fthain@telegraphics.com.au>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
For some reason this driver depends on !64BIT, but it can still be useful
to allow compile-testing on 64-bit machines.
Link: https://lore.kernel.org/r/20191105085609.2338-3-johan@kernel.org
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
The MODULE_LICENSE macro is unconditionally defined in module.h, no need to
ifdef its use.
Link: https://lore.kernel.org/r/20191105085609.2338-2-johan@kernel.org
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
platform_get_irq() will call dev_err() itself on failure, so there is no
need for the driver to also do this. This is detected by coccinelle.
Link: https://lore.kernel.org/r/20191101140058.23212-1-yuehaibing@huawei.com
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
When using this driver on a Blizzard 1260, there were failures whenever DMA
transfers from the SCSI bus to memory of 65535 bytes were followed by a DMA
transfer of 1 byte. This caused the byte at offset 65535 to be overwritten
with 0xff. The Blizzard hardware can't handle single byte DMA transfers.
Besides this issue, limiting the DMA length to something that is not a
multiple of the page size is very inefficient on most file systems.
It seems this limit was chosen because the DMA transfer counter of the ESP
by default is 16 bits wide, thus limiting the length to 65535 bytes.
However, the value 0 means 65536 bytes, which is handled by the ESP and the
Blizzard just fine. It is also the default maximum used by esp_scsi when
drivers don't provide their own dma_length_limit() function.
The limit of 65536 bytes can be used by all boards except the Fastlane. The
old driver used a limit of 65532 bytes (0xfffc), which is reintroduced in
this patch.
Fixes: b7ded0e8b0d1 ("scsi: zorro_esp: Limit DMA transfers to 65535 bytes")
Link: https://lore.kernel.org/r/20191112175523.23145-1-jongk@linux-m68k.org
Signed-off-by: Kars de Jong <jongk@linux-m68k.org>
Reviewed-by: Finn Thain <fthain@telegraphics.com.au>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Fixes gcc '-Wunused-but-set-variable' warning:
drivers/scsi/csiostor/csio_lnode.c: In function 'csio_ln_init':
drivers/scsi/csiostor/csio_lnode.c:1995:21: warning:
variable 'rln' set but not used [-Wunused-but-set-variable]
It is never used since introduction, so remove it.
Link: https://lore.kernel.org/r/20191029061530.98197-1-yuehaibing@huawei.com
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
In function __ufshcd_query_descriptor(), in the event of an error
happening, we directly goto out_unlock and forget to invaliate
hba->dev_cmd.query.descriptor pointer. This results in this pointer still
valid in ufshcd_copy_query_response() for other query requests which go
through ufshcd_exec_raw_upiu_cmd(). This will cause __memcpy() crash and
system hangs. Log as shown below:
Unable to handle kernel paging request at virtual address
ffff000012233c40
Mem abort info:
ESR = 0x96000047
Exception class = DABT (current EL), IL = 32 bits
SET = 0, FnV = 0
EA = 0, S1PTW = 0
Data abort info:
ISV = 0, ISS = 0x00000047
CM = 0, WnR = 1
swapper pgtable: 4k pages, 48-bit VAs, pgdp = 0000000028cc735c
[ffff000012233c40] pgd=00000000bffff003, pud=00000000bfffe003,
pmd=00000000ba8b8003, pte=0000000000000000
Internal error: Oops: 96000047 [#2] PREEMPT SMP
...
Call trace:
__memcpy+0x74/0x180
ufshcd_issue_devman_upiu_cmd+0x250/0x3c0
ufshcd_exec_raw_upiu_cmd+0xfc/0x1a8
ufs_bsg_request+0x178/0x3b0
bsg_queue_rq+0xc0/0x118
blk_mq_dispatch_rq_list+0xb0/0x538
blk_mq_sched_dispatch_requests+0x18c/0x1d8
__blk_mq_run_hw_queue+0xb4/0x118
blk_mq_run_work_fn+0x28/0x38
process_one_work+0x1ec/0x470
worker_thread+0x48/0x458
kthread+0x130/0x138
ret_from_fork+0x10/0x1c
Code: 540000ab a8c12027 a88120c7 a8c12027 (a88120c7)
---[ end trace 793e1eb5dff69f2d ]---
note: kworker/0:2H[2054] exited with preempt_count 1
This patch is to move "descriptor = NULL" down to below the label
"out_unlock".
Fixes: d44a5f98bb49b2(ufs: query descriptor API)
Link: https://lore.kernel.org/r/20191112223436.27449-3-huobean@gmail.com
Reviewed-by: Alim Akhtar <alim.akhtar@samsung.com>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Bean Huo <beanhuo@micron.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Print out returned response size and buffer size, while the front one is
bigger than the back one.
Link: https://lore.kernel.org/r/20191112223436.27449-2-huobean@gmail.com
Reviewed-by: Alim Akhtar <alim.akhtar@samsung.com>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Bean Huo <beanhuo@micron.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
The !! operator on a bool is pointless, so remove an example in
hisi_sas_rescan_topology().
Link: https://lore.kernel.org/r/1573551059-107873-5-git-send-email-john.garry@huawei.com
Signed-off-by: John Garry <john.garry@huawei.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Currently we call function hisi_sas_debugfs_exit() to remove debugfs_dir
before freeing interrupt irqs and destroying workqueue in the driver remove
path.
If a dump is triggered before function hisi_sas_debugfs_exit() but
debugfs_work may be called after it, so it may refer to already removed
debugfs_dir which will cause NULL pointer dereference.
To avoid it, put function hisi_sas_debugfs_exit() after free_irqs and
destroy workqueue when removing hisi_sas driver.
Link: https://lore.kernel.org/r/1573551059-107873-4-git-send-email-john.garry@huawei.com
Signed-off-by: Xiang Chen <chenxiang66@hisilicon.com>
Signed-off-by: John Garry <john.garry@huawei.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Need to return directly if init hardware failed.
Fixes: 73a4925d154c ("scsi: hisi_sas: Update all the registers after suspend and resume")
Link: https://lore.kernel.org/r/1573551059-107873-3-git-send-email-john.garry@huawei.com
Signed-off-by: Xiang Chen <chenxiang66@hisilicon.com>
Signed-off-by: John Garry <john.garry@huawei.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Need to check the structure sas_port before using it.
Link: https://lore.kernel.org/r/1573551059-107873-2-git-send-email-john.garry@huawei.com
Signed-off-by: Xiang Chen <chenxiang66@hisilicon.com>
Signed-off-by: John Garry <john.garry@huawei.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Update lpfc version to 12.6.0.2
Link: https://lore.kernel.org/r/20191111230401.12958-7-jsmart2021@gmail.com
Reviewed-by: Ewan D. Milne <emilne@redhat.com>
Signed-off-by: Dick Kennedy <dick.kennedy@broadcom.com>
Signed-off-by: James Smart <jsmart2021@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Driver is setting the initiator nvme template with a max hw queues value of
the present cpu count which is odd. It should be registering the number of
hdwq queues (queues created on the adapter).
Change to set nvme tempate, in all cases, to the number of hardware queues.
Link: https://lore.kernel.org/r/20191111230401.12958-6-jsmart2021@gmail.com
Signed-off-by: Dick Kennedy <dick.kennedy@broadcom.com>
Signed-off-by: James Smart <jsmart2021@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Currently, cpu_map[cpu#]->hdwq is left to equal LPFC_VECTOR_MAP_EMPTY for
not present CPUs. If a CPU is dynamically hot-added, it is possible we may
crash due to not assigning an allocated hdwq.
Correct by assigning a hdwq at initialization for all not-present CPUs.
Fixes: dcaa21367938 ("scsi: lpfc: Change default IRQ model on AMD architectures")
Link: https://lore.kernel.org/r/20191111230401.12958-5-jsmart2021@gmail.com
Reviewed-by: Ewan D. Milne <emilne@redhat.com>
Signed-off-by: Dick Kennedy <dick.kennedy@broadcom.com>
Signed-off-by: James Smart <jsmart2021@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Compilation can fail due to having an inline function reference where the
function body is not present.
Fix by removing the inline tag.
Fixes: 93a4d6f40198 ("scsi: lpfc: Add registration for CPU Offline/Online events")
Link: https://lore.kernel.org/r/20191111230401.12958-4-jsmart2021@gmail.com
Reviewed-by: Ewan D. Milne <emilne@redhat.com>
Signed-off-by: Dick Kennedy <dick.kennedy@broadcom.com>
Signed-off-by: James Smart <jsmart2021@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Coverity reported the following:
*** CID 101747: Null pointer dereferences (FORWARD_NULL)
/drivers/scsi/lpfc/lpfc_els.c: 4439 in lpfc_cmpl_els_rsp()
4433 kfree(mp);
4434 }
4435 mempool_free(mbox, phba->mbox_mem_pool);
4436 }
4437 out:
4438 if (ndlp && NLP_CHK_NODE_ACT(ndlp)) {
vvv CID 101747: Null pointer dereferences (FORWARD_NULL)
vvv Dereferencing null pointer "shost".
4439 spin_lock_irq(shost->host_lock);
4440 ndlp->nlp_flag &= ~(NLP_ACC_REGLOGIN | NLP_RM_DFLT_RPI);
4441 spin_unlock_irq(shost->host_lock);
4442
4443 /* If the node is not being used by another discovery thread,
4444 * and we are sending a reject, we are done with it.
Fix by adding a check for non-null shost in line 4438.
The scenario when shost is set to null is when ndlp is null.
As such, the ndlp check present was sufficient. But better safe
than sorry so add the shost check.
Reported-by: coverity-bot <keescook+coverity-bot@chromium.org>
Addresses-Coverity-ID: 101747 ("Null pointer dereferences")
Fixes: 2e0fef85e098 ("[SCSI] lpfc: NPIV: split ports")
CC: James Bottomley <James.Bottomley@SteelEye.com>
CC: "Gustavo A. R. Silva" <gustavo@embeddedor.com>
CC: linux-next@vger.kernel.org
Link: https://lore.kernel.org/r/20191111230401.12958-3-jsmart2021@gmail.com
Reviewed-by: Ewan D. Milne <emilne@redhat.com>
Signed-off-by: Dick Kennedy <dick.kennedy@broadcom.com>
Signed-off-by: James Smart <jsmart2021@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Coverity reported the following:
*** CID 1487391: Null pointer dereferences (FORWARD_NULL)
/drivers/scsi/lpfc/lpfc_scsi.c: 614 in lpfc_get_scsi_buf_s3()
608 spin_unlock(&phba->scsi_buf_list_put_lock);
609 }
610 spin_unlock_irqrestore(&phba->scsi_buf_list_get_lock, iflag);
611
612 if (lpfc_ndlp_check_qdepth(phba, ndlp)) {
613 atomic_inc(&ndlp->cmd_pending);
vvv CID 1487391: Null pointer dereferences (FORWARD_NULL)
vvv Dereferencing null pointer "lpfc_cmd".
614 lpfc_cmd->flags |= LPFC_SBUF_BUMP_QDEPTH;
615 }
616 return lpfc_cmd;
617 }
618 /**
619 * lpfc_get_scsi_buf_s4 - Get a scsi buffer from io_buf_list of the HBA
Fix by checking lpfc_cmd to be non-NULL as part of line 612
Reported-by: coverity-bot <keescook+coverity-bot@chromium.org>
Addresses-Coverity-ID: 1487391 ("Null pointer dereferences")
Fixes: 2a5b7d626ed2 ("scsi: lpfc: Limit tracking of tgt queue depth in fast path")
CC: "Martin K. Petersen" <martin.petersen@oracle.com>
CC: "Gustavo A. R. Silva" <gustavo@embeddedor.com>
CC: linux-next@vger.kernel.org
Link: https://lore.kernel.org/r/20191111230401.12958-2-jsmart2021@gmail.com
Reviewed-by: Ewan D. Milne <emilne@redhat.com>
Signed-off-by: Dick Kennedy <dick.kennedy@broadcom.com>
Signed-off-by: James Smart <jsmart2021@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
TI's J721e SoC has a Cadence UFS IP with a TI specific wrapper. This is a
minimal driver to configure the wrapper. It releases the UFS slave device
out of reset and sets up registers to indicate PHY reference clock input
frequency before probing child Cadence UFS driver.
Link: https://lore.kernel.org/r/20191108164857.11466-3-vigneshr@ti.com
Reviewed-by: Avri Altman <avri.altman@wdc.com>
Reviewed-by: Alim Akhtar <alim.akhtar@samsung.com>
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
Vikram Auradkar
John Sperbeck
peter chang
Subhash Jadavani
Asutosh Das
Venkat Gopalakrishnan
Can Guo
Finn Thain
Johan Hovold
YueHaibing
Kars de Jong
Bean Huo
John Garry
Xiang Chen
James Smart
Vignesh Raghavendra