aboutsummaryrefslogtreecommitdiffstats
path: root/.get_maintainer.ignore (unfollow)
AgeCommit message (Collapse)AuthorFilesLines
2019-05-01ipv6: A few fixes on dereferencing rt->fromMartin KaFai Lau1-20/+18
It is a followup after the fix in commit 9c69a1320515 ("route: Avoid crash from dereferencing NULL rt->from") rt6_do_redirect(): 1. NULL checking is needed on rt->from because a parallel fib6_info delete could happen that sets rt->from to NULL. (e.g. rt6_remove_exception() and fib6_drop_pcpu_from()). 2. fib6_info_hold() is not enough. Same reason as (1). Meaning, holding dst->__refcnt cannot ensure rt->from is not NULL or rt->from->fib6_ref is not 0. Instead of using fib6_info_hold_safe() which ip6_rt_cache_alloc() is already doing, this patch chooses to extend the rcu section to keep "from" dereference-able after checking for NULL. inet6_rtm_getroute(): 1. NULL checking is also needed on rt->from for a similar reason. Note that inet6_rtm_getroute() is using RTNL_FLAG_DOIT_UNLOCKED. Fixes: a68886a69180 ("net/ipv6: Make from in rt6_info rcu protected") Signed-off-by: Martin KaFai Lau <kafai@fb.com> Acked-by: Wei Wang <weiwan@google.com> Reviewed-by: David Ahern <dsahern@gmail.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-05-01rds: ib: force endiannes annotationNicholas Mc Guire1-5/+3
While the endiannes is being handled correctly as indicated by the comment above the offending line - sparse was unhappy with the missing annotation as be64_to_cpu() expects a __be64 argument. To mitigate this annotation all involved variables are changed to a consistent __le64 and the conversion to uint64_t delayed to the call to rds_cong_map_updated(). Signed-off-by: Nicholas Mc Guire <hofrat@osadl.org> Acked-by: Santosh Shilimkar <santosh.shilimkar@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-05-01selftests: fib_rule_tests: print the result and return 1 if any tests failedHangbin Liu1-0/+6
Fixes: 65b2b4939a64 ("selftests: net: initial fib rule tests") Signed-off-by: Hangbin Liu <liuhangbin@gmail.com> Reviewed-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-05-01ipv4: ip_do_fragment: Preserve skb_iif during fragmentationShmulik Ladkani1-0/+1
Previously, during fragmentation after forwarding, skb->skb_iif isn't preserved, i.e. 'ip_copy_metadata' does not copy skb_iif from given 'from' skb. As a result, ip_do_fragment's creates fragments with zero skb_iif, leading to inconsistent behavior. Assume for example an eBPF program attached at tc egress (post forwarding) that examines __sk_buff->ingress_ifindex: - the correct iif is observed if forwarding path does not involve fragmentation/refragmentation - a bogus iif is observed if forwarding path involves fragmentation/refragmentatiom Fix, by preserving skb_iif during 'ip_copy_metadata'. Signed-off-by: Shmulik Ladkani <shmulik.ladkani@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-05-01net/tls: avoid NULL pointer deref on nskb->sk in fallbackJakub Kicinski1-1/+2
update_chksum() accesses nskb->sk before it has been set by complete_skb(), move the init up. Fixes: e8f69799810c ("net/tls: Add generic NIC offload infrastructure") Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: Simon Horman <simon.horman@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-05-01selftests: fib_rule_tests: Fix icmp proto with ipv6David Ahern1-2/+2
A recent commit returns an error if icmp is used as the ip-proto for IPv6 fib rules. Update fib_rule_tests to send ipv6-icmp instead of icmp. Fixes: 5e1a99eae8499 ("ipv4: Add ICMPv6 support when parse route ipproto") Signed-off-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-05-01packet: validate msg_namelen in send directlyWillem de Bruijn1-10/+14
Packet sockets in datagram mode take a destination address. Verify its length before passing to dev_hard_header. Prior to 2.6.14-rc3, the send code ignored sll_halen. This is established behavior. Directly compare msg_namelen to dev->addr_len. Change v1->v2: initialize addr in all paths Fixes: 6b8d95f1795c4 ("packet: validate address length if non-zero") Suggested-by: David Laight <David.Laight@aculab.com> Signed-off-by: Willem de Bruijn <willemb@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-05-01packet: in recvmsg msg_name return at least sizeof sockaddr_llWillem de Bruijn1-2/+11
Packet send checks that msg_name is at least sizeof sockaddr_ll. Packet recv must return at least this length, so that its output can be passed unmodified to packet send. This ceased to be true since adding support for lladdr longer than sll_addr. Since, the return value uses true address length. Always return at least sizeof sockaddr_ll, even if address length is shorter. Zero the padding bytes. Change v1->v2: do not overwrite zeroed padding again. use copy_len. Fixes: 0fb375fb9b93 ("[AF_PACKET]: Allow for > 8 byte hardware addresses.") Suggested-by: David Laight <David.Laight@aculab.com> Signed-off-by: Willem de Bruijn <willemb@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-05-01sctp: avoid running the sctp state machine recursivelyXin Long3-38/+27
Ying triggered a call trace when doing an asconf testing: BUG: scheduling while atomic: swapper/12/0/0x10000100 Call Trace: <IRQ> [<ffffffffa4375904>] dump_stack+0x19/0x1b [<ffffffffa436fcaf>] __schedule_bug+0x64/0x72 [<ffffffffa437b93a>] __schedule+0x9ba/0xa00 [<ffffffffa3cd5326>] __cond_resched+0x26/0x30 [<ffffffffa437bc4a>] _cond_resched+0x3a/0x50 [<ffffffffa3e22be8>] kmem_cache_alloc_node+0x38/0x200 [<ffffffffa423512d>] __alloc_skb+0x5d/0x2d0 [<ffffffffc0995320>] sctp_packet_transmit+0x610/0xa20 [sctp] [<ffffffffc098510e>] sctp_outq_flush+0x2ce/0xc00 [sctp] [<ffffffffc098646c>] sctp_outq_uncork+0x1c/0x20 [sctp] [<ffffffffc0977338>] sctp_cmd_interpreter.isra.22+0xc8/0x1460 [sctp] [<ffffffffc0976ad1>] sctp_do_sm+0xe1/0x350 [sctp] [<ffffffffc099443d>] sctp_primitive_ASCONF+0x3d/0x50 [sctp] [<ffffffffc0977384>] sctp_cmd_interpreter.isra.22+0x114/0x1460 [sctp] [<ffffffffc0976ad1>] sctp_do_sm+0xe1/0x350 [sctp] [<ffffffffc097b3a4>] sctp_assoc_bh_rcv+0xf4/0x1b0 [sctp] [<ffffffffc09840f1>] sctp_inq_push+0x51/0x70 [sctp] [<ffffffffc099732b>] sctp_rcv+0xa8b/0xbd0 [sctp] As it shows, the first sctp_do_sm() running under atomic context (NET_RX softirq) invoked sctp_primitive_ASCONF() that uses GFP_KERNEL flag later, and this flag is supposed to be used in non-atomic context only. Besides, sctp_do_sm() was called recursively, which is not expected. Vlad tried to fix this recursive call in Commit c0786693404c ("sctp: Fix oops when sending queued ASCONF chunks") by introducing a new command SCTP_CMD_SEND_NEXT_ASCONF. But it didn't work as this command is still used in the first sctp_do_sm() call, and sctp_primitive_ASCONF() will be called in this command again. To avoid calling sctp_do_sm() recursively, we send the next queued ASCONF not by sctp_primitive_ASCONF(), but by sctp_sf_do_prm_asconf() in the 1st sctp_do_sm() directly. Reported-by: Ying Xu <yinxu@redhat.com> Signed-off-by: Xin Long <lucien.xin@gmail.com> Acked-by: Neil Horman <nhorman@tuxdriver.com> Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-05-01stmmac: pci: Fix typo in IOT2000 commentJan Kiszka1-1/+1
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-05-01Documentation: fix netdev-FAQ.rst markup warningRandy Dunlap1-1/+1
Fix ReST underline warning: ./Documentation/networking/netdev-FAQ.rst:135: WARNING: Title underline too short. Q: I made changes to only a few patches in a patch series should I resend only those changed? -------------------------------------------------------------------------------------------- Fixes: ffa91253739c ("Documentation: networking: Update netdev-FAQ regarding patches") Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Cc: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-30ipv6: fix races in ip6_dst_destroy()Eric Dumazet2-10/+3
We had many syzbot reports that seem to be caused by use-after-free of struct fib6_info. ip6_dst_destroy(), fib6_drop_pcpu_from() and rt6_remove_exception() are writers vs rt->from, and use non consistent synchronization among themselves. Switching to xchg() will solve the issues with no possible lockdep issues. BUG: KASAN: user-memory-access in atomic_dec_and_test include/asm-generic/atomic-instrumented.h:747 [inline] BUG: KASAN: user-memory-access in fib6_info_release include/net/ip6_fib.h:294 [inline] BUG: KASAN: user-memory-access in fib6_info_release include/net/ip6_fib.h:292 [inline] BUG: KASAN: user-memory-access in fib6_drop_pcpu_from net/ipv6/ip6_fib.c:927 [inline] BUG: KASAN: user-memory-access in fib6_purge_rt+0x4f6/0x670 net/ipv6/ip6_fib.c:960 Write of size 4 at addr 0000000000ffffb4 by task syz-executor.1/7649 CPU: 0 PID: 7649 Comm: syz-executor.1 Not tainted 5.1.0-rc6+ #183 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Call Trace: __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0x172/0x1f0 lib/dump_stack.c:113 kasan_report.cold+0x5/0x40 mm/kasan/report.c:321 check_memory_region_inline mm/kasan/generic.c:185 [inline] check_memory_region+0x123/0x190 mm/kasan/generic.c:191 kasan_check_write+0x14/0x20 mm/kasan/common.c:108 atomic_dec_and_test include/asm-generic/atomic-instrumented.h:747 [inline] fib6_info_release include/net/ip6_fib.h:294 [inline] fib6_info_release include/net/ip6_fib.h:292 [inline] fib6_drop_pcpu_from net/ipv6/ip6_fib.c:927 [inline] fib6_purge_rt+0x4f6/0x670 net/ipv6/ip6_fib.c:960 fib6_del_route net/ipv6/ip6_fib.c:1813 [inline] fib6_del+0xac2/0x10a0 net/ipv6/ip6_fib.c:1844 fib6_clean_node+0x3a8/0x590 net/ipv6/ip6_fib.c:2006 fib6_walk_continue+0x495/0x900 net/ipv6/ip6_fib.c:1928 fib6_walk+0x9d/0x100 net/ipv6/ip6_fib.c:1976 fib6_clean_tree+0xe0/0x120 net/ipv6/ip6_fib.c:2055 __fib6_clean_all+0x118/0x2a0 net/ipv6/ip6_fib.c:2071 fib6_clean_all+0x2b/0x40 net/ipv6/ip6_fib.c:2082 rt6_sync_down_dev+0x134/0x150 net/ipv6/route.c:4057 rt6_disable_ip+0x27/0x5f0 net/ipv6/route.c:4062 addrconf_ifdown+0xa2/0x1220 net/ipv6/addrconf.c:3705 addrconf_notify+0x19a/0x2260 net/ipv6/addrconf.c:3630 notifier_call_chain+0xc7/0x240 kernel/notifier.c:93 __raw_notifier_call_chain kernel/notifier.c:394 [inline] raw_notifier_call_chain+0x2e/0x40 kernel/notifier.c:401 call_netdevice_notifiers_info+0x3f/0x90 net/core/dev.c:1753 call_netdevice_notifiers_extack net/core/dev.c:1765 [inline] call_netdevice_notifiers net/core/dev.c:1779 [inline] dev_close_many+0x33f/0x6f0 net/core/dev.c:1522 rollback_registered_many+0x43b/0xfd0 net/core/dev.c:8177 rollback_registered+0x109/0x1d0 net/core/dev.c:8242 unregister_netdevice_queue net/core/dev.c:9289 [inline] unregister_netdevice_queue+0x1ee/0x2c0 net/core/dev.c:9282 unregister_netdevice include/linux/netdevice.h:2658 [inline] __tun_detach+0xd5b/0x1000 drivers/net/tun.c:727 tun_detach drivers/net/tun.c:744 [inline] tun_chr_close+0xe0/0x180 drivers/net/tun.c:3443 __fput+0x2e5/0x8d0 fs/file_table.c:278 ____fput+0x16/0x20 fs/file_table.c:309 task_work_run+0x14a/0x1c0 kernel/task_work.c:113 exit_task_work include/linux/task_work.h:22 [inline] do_exit+0x90a/0x2fa0 kernel/exit.c:876 do_group_exit+0x135/0x370 kernel/exit.c:980 __do_sys_exit_group kernel/exit.c:991 [inline] __se_sys_exit_group kernel/exit.c:989 [inline] __x64_sys_exit_group+0x44/0x50 kernel/exit.c:989 do_syscall_64+0x103/0x610 arch/x86/entry/common.c:290 entry_SYSCALL_64_after_hwframe+0x49/0xbe RIP: 0033:0x458da9 Code: ad b8 fb ff c3 66 2e 0f 1f 84 00 00 00 00 00 66 90 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 0f 83 7b b8 fb ff c3 66 2e 0f 1f 84 00 00 00 00 RSP: 002b:00007ffeafc2a6a8 EFLAGS: 00000246 ORIG_RAX: 00000000000000e7 RAX: ffffffffffffffda RBX: 000000000000001c RCX: 0000000000458da9 RDX: 0000000000412a80 RSI: 0000000000a54ef0 RDI: 0000000000000043 RBP: 00000000004be552 R08: 000000000000000c R09: 000000000004c0d1 R10: 0000000002341940 R11: 0000000000000246 R12: 00000000ffffffff R13: 00007ffeafc2a7f0 R14: 000000000004c065 R15: 00007ffeafc2a800 Fixes: a68886a69180 ("net/ipv6: Make from in rt6_info rcu protected") Signed-off-by: Eric Dumazet <edumazet@google.com> Reported-by: syzbot <syzkaller@googlegroups.com> Cc: David Ahern <dsahern@gmail.com> Reviewed-by: David Ahern <dsahern@gmail.com> Acked-by: Martin KaFai Lau <kafai@fb.com> Acked-by: Wei Wang <weiwan@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-30l2ip: fix possible use-after-freeEric Dumazet1-4/+4
Before taking a refcount on a rcu protected structure, we need to make sure the refcount is not zero. syzbot reported : refcount_t: increment on 0; use-after-free. WARNING: CPU: 1 PID: 23533 at lib/refcount.c:156 refcount_inc_checked lib/refcount.c:156 [inline] WARNING: CPU: 1 PID: 23533 at lib/refcount.c:156 refcount_inc_checked+0x61/0x70 lib/refcount.c:154 Kernel panic - not syncing: panic_on_warn set ... CPU: 1 PID: 23533 Comm: syz-executor.2 Not tainted 5.1.0-rc7+ #93 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Call Trace: __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0x172/0x1f0 lib/dump_stack.c:113 panic+0x2cb/0x65c kernel/panic.c:214 __warn.cold+0x20/0x45 kernel/panic.c:571 report_bug+0x263/0x2b0 lib/bug.c:186 fixup_bug arch/x86/kernel/traps.c:179 [inline] fixup_bug arch/x86/kernel/traps.c:174 [inline] do_error_trap+0x11b/0x200 arch/x86/kernel/traps.c:272 do_invalid_op+0x37/0x50 arch/x86/kernel/traps.c:291 invalid_op+0x14/0x20 arch/x86/entry/entry_64.S:973 RIP: 0010:refcount_inc_checked lib/refcount.c:156 [inline] RIP: 0010:refcount_inc_checked+0x61/0x70 lib/refcount.c:154 Code: 1d 98 2b 2a 06 31 ff 89 de e8 db 2c 40 fe 84 db 75 dd e8 92 2b 40 fe 48 c7 c7 20 7a a1 87 c6 05 78 2b 2a 06 01 e8 7d d9 12 fe <0f> 0b eb c1 90 90 90 90 90 90 90 90 90 90 90 55 48 89 e5 41 57 41 RSP: 0018:ffff888069f0fba8 EFLAGS: 00010286 RAX: 0000000000000000 RBX: 0000000000000000 RCX: 0000000000000000 RDX: 000000000000f353 RSI: ffffffff815afcb6 RDI: ffffed100d3e1f67 RBP: ffff888069f0fbb8 R08: ffff88809b1845c0 R09: ffffed1015d23ef1 R10: ffffed1015d23ef0 R11: ffff8880ae91f787 R12: ffff8880a8f26968 R13: 0000000000000004 R14: dffffc0000000000 R15: ffff8880a49a6440 l2tp_tunnel_inc_refcount net/l2tp/l2tp_core.h:240 [inline] l2tp_tunnel_get+0x250/0x580 net/l2tp/l2tp_core.c:173 pppol2tp_connect+0xc00/0x1c70 net/l2tp/l2tp_ppp.c:702 __sys_connect+0x266/0x330 net/socket.c:1808 __do_sys_connect net/socket.c:1819 [inline] __se_sys_connect net/socket.c:1816 [inline] __x64_sys_connect+0x73/0xb0 net/socket.c:1816 Fixes: 54652eb12c1b ("l2tp: hold tunnel while looking up sessions in l2tp_netlink") Signed-off-by: Eric Dumazet <edumazet@google.com> Reported-by: syzbot <syzkaller@googlegroups.com> Cc: Guillaume Nault <g.nault@alphalink.fr> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-30appletalk: Set error code if register_snap_client failedYueHaibing1-0/+1
If register_snap_client fails in atalk_init, error code should be set, otherwise it will triggers NULL pointer dereference while unloading module. Fixes: 9804501fa122 ("appletalk: Fix potential NULL pointer dereference in unregister_snap_client") Signed-off-by: YueHaibing <yuehaibing@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-30net: dsa: bcm_sf2: fix buffer overflow doing set_rxnfcDan Carpenter1-0/+6
The "fs->location" is a u32 that comes from the user in ethtool_set_rxnfc(). We can't pass unclamped values to test_bit() or it results in an out of bounds access beyond the end of the bitmap. Fixes: 7318166cacad ("net: dsa: bcm_sf2: Add support for ethtool::rxnfc") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-30rxrpc: Fix net namespace cleanupDavid Howells1-16/+16
In rxrpc_destroy_all_calls(), there are two phases: (1) make sure the ->calls list is empty, emitting error messages if not, and (2) wait for the RCU cleanup to happen on outstanding calls (ie. ->nr_calls becomes 0). To avoid taking the call_lock, the function prechecks ->calls and if empty, it returns to avoid taking the lock - this is wrong, however: it still needs to go and do the second phase and wait for ->nr_calls to become 0. Without this, the rxrpc_net struct may get deallocated before we get to the RCU cleanup for the last calls. This can lead to: Slab corruption (Not tainted): kmalloc-16k start=ffff88802b178000, len=16384 050: 6b 6b 6b 6b 6b 6b 6b 6b 61 6b 6b 6b 6b 6b 6b 6b kkkkkkkkakkkkkkk Note the "61" at offset 0x58. This corresponds to the ->nr_calls member of struct rxrpc_net (which is >9k in size, and thus allocated out of the 16k slab). Fix this by flipping the condition on the if-statement, putting the locked section inside the if-body and dropping the return from there. The function will then always go on to wait for the RCU cleanup on outstanding calls. Fixes: 2baec2c3f854 ("rxrpc: Support network namespacing") Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-29ipv6/flowlabel: wait rcu grace period before put_pid()Eric Dumazet1-6/+12
syzbot was able to catch a use-after-free read in pid_nr_ns() [1] ip6fl_seq_show() seems to use RCU protection, dereferencing fl->owner.pid but fl_free() releases fl->owner.pid before rcu grace period is started. [1] BUG: KASAN: use-after-free in pid_nr_ns+0x128/0x140 kernel/pid.c:407 Read of size 4 at addr ffff888094012a04 by task syz-executor.0/18087 CPU: 0 PID: 18087 Comm: syz-executor.0 Not tainted 5.1.0-rc6+ #89 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Call Trace: __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0x172/0x1f0 lib/dump_stack.c:113 print_address_description.cold+0x7c/0x20d mm/kasan/report.c:187 kasan_report.cold+0x1b/0x40 mm/kasan/report.c:317 __asan_report_load4_noabort+0x14/0x20 mm/kasan/generic_report.c:131 pid_nr_ns+0x128/0x140 kernel/pid.c:407 ip6fl_seq_show+0x2f8/0x4f0 net/ipv6/ip6_flowlabel.c:794 seq_read+0xad3/0x1130 fs/seq_file.c:268 proc_reg_read+0x1fe/0x2c0 fs/proc/inode.c:227 do_loop_readv_writev fs/read_write.c:701 [inline] do_loop_readv_writev fs/read_write.c:688 [inline] do_iter_read+0x4a9/0x660 fs/read_write.c:922 vfs_readv+0xf0/0x160 fs/read_write.c:984 kernel_readv fs/splice.c:358 [inline] default_file_splice_read+0x475/0x890 fs/splice.c:413 do_splice_to+0x12a/0x190 fs/splice.c:876 splice_direct_to_actor+0x2d2/0x970 fs/splice.c:953 do_splice_direct+0x1da/0x2a0 fs/splice.c:1062 do_sendfile+0x597/0xd00 fs/read_write.c:1443 __do_sys_sendfile64 fs/read_write.c:1498 [inline] __se_sys_sendfile64 fs/read_write.c:1490 [inline] __x64_sys_sendfile64+0x15a/0x220 fs/read_write.c:1490 do_syscall_64+0x103/0x610 arch/x86/entry/common.c:290 entry_SYSCALL_64_after_hwframe+0x49/0xbe RIP: 0033:0x458da9 Code: ad b8 fb ff c3 66 2e 0f 1f 84 00 00 00 00 00 66 90 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 0f 83 7b b8 fb ff c3 66 2e 0f 1f 84 00 00 00 00 RSP: 002b:00007f300d24bc78 EFLAGS: 00000246 ORIG_RAX: 0000000000000028 RAX: ffffffffffffffda RBX: 0000000000000004 RCX: 0000000000458da9 RDX: 00000000200000c0 RSI: 0000000000000008 RDI: 0000000000000007 RBP: 000000000073bf00 R08: 0000000000000000 R09: 0000000000000000 R10: 000000000000005a R11: 0000000000000246 R12: 00007f300d24c6d4 R13: 00000000004c5fa3 R14: 00000000004da748 R15: 00000000ffffffff Allocated by task 17543: save_stack+0x45/0xd0 mm/kasan/common.c:75 set_track mm/kasan/common.c:87 [inline] __kasan_kmalloc mm/kasan/common.c:497 [inline] __kasan_kmalloc.constprop.0+0xcf/0xe0 mm/kasan/common.c:470 kasan_slab_alloc+0xf/0x20 mm/kasan/common.c:505 slab_post_alloc_hook mm/slab.h:437 [inline] slab_alloc mm/slab.c:3393 [inline] kmem_cache_alloc+0x11a/0x6f0 mm/slab.c:3555 alloc_pid+0x55/0x8f0 kernel/pid.c:168 copy_process.part.0+0x3b08/0x7980 kernel/fork.c:1932 copy_process kernel/fork.c:1709 [inline] _do_fork+0x257/0xfd0 kernel/fork.c:2226 __do_sys_clone kernel/fork.c:2333 [inline] __se_sys_clone kernel/fork.c:2327 [inline] __x64_sys_clone+0xbf/0x150 kernel/fork.c:2327 do_syscall_64+0x103/0x610 arch/x86/entry/common.c:290 entry_SYSCALL_64_after_hwframe+0x49/0xbe Freed by task 7789: save_stack+0x45/0xd0 mm/kasan/common.c:75 set_track mm/kasan/common.c:87 [inline] __kasan_slab_free+0x102/0x150 mm/kasan/common.c:459 kasan_slab_free+0xe/0x10 mm/kasan/common.c:467 __cache_free mm/slab.c:3499 [inline] kmem_cache_free+0x86/0x260 mm/slab.c:3765 put_pid.part.0+0x111/0x150 kernel/pid.c:111 put_pid+0x20/0x30 kernel/pid.c:105 fl_free+0xbe/0xe0 net/ipv6/ip6_flowlabel.c:102 ip6_fl_gc+0x295/0x3e0 net/ipv6/ip6_flowlabel.c:152 call_timer_fn+0x190/0x720 kernel/time/timer.c:1325 expire_timers kernel/time/timer.c:1362 [inline] __run_timers kernel/time/timer.c:1681 [inline] __run_timers kernel/time/timer.c:1649 [inline] run_timer_softirq+0x652/0x1700 kernel/time/timer.c:1694 __do_softirq+0x266/0x95a kernel/softirq.c:293 The buggy address belongs to the object at ffff888094012a00 which belongs to the cache pid_2 of size 88 The buggy address is located 4 bytes inside of 88-byte region [ffff888094012a00, ffff888094012a58) The buggy address belongs to the page: page:ffffea0002500480 count:1 mapcount:0 mapping:ffff88809a483080 index:0xffff888094012980 flags: 0x1fffc0000000200(slab) raw: 01fffc0000000200 ffffea00018a3508 ffffea0002524a88 ffff88809a483080 raw: ffff888094012980 ffff888094012000 000000010000001b 0000000000000000 page dumped because: kasan: bad access detected Memory state around the buggy address: ffff888094012900: fb fb fb fb fb fb fb fb fb fb fb fc fc fc fc fc ffff888094012980: fb fb fb fb fb fb fb fb fb fb fb fc fc fc fc fc >ffff888094012a00: fb fb fb fb fb fb fb fb fb fb fb fc fc fc fc fc ^ ffff888094012a80: fb fb fb fb fb fb fb fb fb fb fb fc fc fc fc fc ffff888094012b00: fb fb fb fb fb fb fb fb fb fb fb fc fc fc fc fc Fixes: 4f82f45730c6 ("net ip6 flowlabel: Make owner a union of struct pid * and kuid_t") Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Eric W. Biederman <ebiederm@xmission.com> Reported-by: syzbot <syzkaller@googlegroups.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-29vrf: Use orig netdev to count Ip6InNoRoutes and a fresh route lookup when sending dest unreachStephen Suryaputra1-6/+17
When there is no route to an IPv6 dest addr, skb_dst(skb) points to loopback dev in the case of that the IP6CB(skb)->iif is enslaved to a vrf. This causes Ip6InNoRoutes to be incremented on the loopback dev. This also causes the lookup to fail on icmpv6_send() and the dest unreachable to not sent and Ip6OutNoRoutes gets incremented on the loopback dev. To reproduce: * Gateway configuration: ip link add dev vrf_258 type vrf table 258 ip link set dev enp0s9 master vrf_258 ip addr add 66:1/64 dev enp0s9 ip -6 route add unreachable default metric 8192 table 258 sysctl -w net.ipv6.conf.all.forwarding=1 sysctl -w net.ipv6.conf.enp0s9.forwarding=1 * Sender configuration: ip addr add 66::2/64 dev enp0s9 ip -6 route add default via 66::1 and ping 67::1 for example from the sender. Fix this by counting on the original netdev and reset the skb dst to force a fresh lookup. v2: Fix typo of destination address in the repro steps. v3: Simplify the loopback check (per David Ahern) and use reverse Christmas tree format (per David Miller). Signed-off-by: Stephen Suryaputra <ssuryaextr@gmail.com> Reviewed-by: David Ahern <dsahern@gmail.com> Tested-by: David Ahern <dsahern@gmail.com> Reviewed-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-29tcp: add sanity tests in tcp_add_backlog()Eric Dumazet1-1/+12
Richard and Bruno both reported that my commit added a bug, and Bruno was able to determine the problem came when a segment wih a FIN packet was coalesced to a prior one in tcp backlog queue. It turns out the header prediction in tcp_rcv_established() looks back to TCP headers in the packet, not in the metadata (aka TCP_SKB_CB(skb)->tcp_flags) The fast path in tcp_rcv_established() is not supposed to handle a FIN flag (it does not call tcp_fin()) Therefore we need to make sure to propagate the FIN flag, so that the coalesced packet does not go through the fast path, the same than a GRO packet carrying a FIN flag. While we are at it, make sure we do not coalesce packets with RST or SYN, or if they do not have ACK set. Many thanks to Richard and Bruno for pinpointing the bad commit, and to Richard for providing a first version of the fix. Fixes: 4f693b55c3d2 ("tcp: implement coalescing on backlog queue") Signed-off-by: Eric Dumazet <edumazet@google.com> Reported-by: Richard Purdie <richard.purdie@linuxfoundation.org> Reported-by: Bruno Prémont <bonbons@sysophe.eu> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-29ipv6: invert flowlabel sharing check in process and user modeWillem de Bruijn1-2/+2
A request for a flowlabel fails in process or user exclusive mode must fail if the caller pid or uid does not match. Invert the test. Previously, the test was unsafe wrt PID recycling, but indeed tested for inequality: fl1->owner != fl->owner Fixes: 4f82f45730c68 ("net ip6 flowlabel: Make owner a union of struct pid* and kuid_t") Signed-off-by: Willem de Bruijn <willemb@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-29ath10k: Drop WARN_ON()s that always trigger during system resumeRafael J. Wysocki1-2/+2
ath10k_mac_vif_chan() always returns an error for the given vif during system-wide resume which reliably triggers two WARN_ON()s in ath10k_bss_info_changed() and they are not particularly useful in that code path, so drop them. Tested: QCA6174 hw3.2 PCI with WLAN.RM.2.0-00180-QCARMSWPZ-1 Tested: QCA6174 hw3.2 SDIO with WLAN.RMH.4.4.1-00007-QCARMSWP-1 Fixes: cd93b83ad927 ("ath10k: support for multicast rate control") Fixes: f279294e9ee2 ("ath10k: add support for configuring management packet rate") Cc: stable@vger.kernel.org Reviewed-by: Brian Norris <briannorris@chromium.org> Tested-by: Brian Norris <briannorris@chromium.org> Tested-by: Claire Chang <tientzu@chromium.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-04-29ath10k: perform crash dump collection in workqueueBrian Norris6-9/+29
Commit 25733c4e67df ("ath10k: pci: use mutex for diagnostic window CE polling") introduced a regression where we try to sleep (grab a mutex) in an atomic context: [ 233.602619] BUG: sleeping function called from invalid context at kernel/locking/mutex.c:254 [ 233.602626] in_atomic(): 1, irqs_disabled(): 0, pid: 0, name: swapper/0 [ 233.602636] CPU: 0 PID: 0 Comm: swapper/0 Tainted: G W 5.1.0-rc2 #4 [ 233.602642] Hardware name: Google Scarlet (DT) [ 233.602647] Call trace: [ 233.602663] dump_backtrace+0x0/0x11c [ 233.602672] show_stack+0x20/0x28 [ 233.602681] dump_stack+0x98/0xbc [ 233.602690] ___might_sleep+0x154/0x16c [ 233.602696] __might_sleep+0x78/0x88 [ 233.602704] mutex_lock+0x2c/0x5c [ 233.602717] ath10k_pci_diag_read_mem+0x68/0x21c [ath10k_pci] [ 233.602725] ath10k_pci_diag_read32+0x48/0x74 [ath10k_pci] [ 233.602733] ath10k_pci_dump_registers+0x5c/0x16c [ath10k_pci] [ 233.602741] ath10k_pci_fw_crashed_dump+0xb8/0x548 [ath10k_pci] [ 233.602749] ath10k_pci_napi_poll+0x60/0x128 [ath10k_pci] [ 233.602757] net_rx_action+0x140/0x388 [ 233.602766] __do_softirq+0x1b0/0x35c [...] ath10k_pci_fw_crashed_dump() is called from NAPI contexts, and firmware memory dumps are retrieved using the diag memory interface. A simple reproduction case is to run this on QCA6174A / WLAN.RM.4.4.1-00132-QCARMSWP-1, which happens to be a way to b0rk the firmware: dd if=/sys/kernel/debug/ieee80211/phy0/ath10k/mem_value bs=4K count=1 of=/dev/null (NB: simulated firmware crashes, via debugfs, don't trigger firmware dumps.) The fix is to move the crash-dump into a workqueue context, and avoid relying on 'data_lock' for most mutual exclusion. We only keep using it here for protecting 'fw_crash_counter', while the rest of the coredump buffers are protected by a new 'dump_mutex'. I've tested the above with simulated firmware crashes (debugfs 'reset' file), real firmware crashes (the 'dd' command above), and a variety of reboot and suspend/resume configurations on QCA6174A. Reported here: http://lkml.kernel.org/linux-wireless/20190325202706.GA68720@google.com Fixes: 25733c4e67df ("ath10k: pci: use mutex for diagnostic window CE polling") Signed-off-by: Brian Norris <briannorris@chromium.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-04-28iwlwifi: mvm: fix merge damage in iwl_mvm_vif_dbgfs_register()Luca Coelho1-6/+0
When I rebased Greg's patch, I accidentally left the old if block that was already there. Remove it. Fixes: 154d4899e411 ("iwlwifi: mvm: properly check debugfs dentry before using it") Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2019-04-28iwlwifi: fix driver operation for 5350Emmanuel Grumbach1-1/+2
We introduced a bug that prevented this old device from working. The driver would simply not be able to complete the INIT flow while spewing this warning: CSR addresses aren't configured WARNING: CPU: 0 PID: 819 at drivers/net/wireless/intel/iwlwifi/pcie/drv.c:917 iwl_pci_probe+0x160/0x1e0 [iwlwifi] Cc: stable@vger.kernel.org # v4.18+ Fixes: a8cbb46f831d ("iwlwifi: allow different csr flags for different device families") Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Fixes: c8f1b51e506d ("iwlwifi: allow different csr flags for different device families") Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2019-04-28iwlwifi: mvm: check for length correctness in iwl_mvm_create_skb()Luca Coelho1-4/+24
We don't check for the validity of the lengths in the packet received from the firmware. If the MPDU length received in the rx descriptor is too short to contain the header length and the crypt length together, we may end up trying to copy a negative number of bytes (headlen - hdrlen < 0) which will underflow and cause us to try to copy a huge amount of data. This causes oopses such as this one: BUG: unable to handle kernel paging request at ffff896be2970000 PGD 5e201067 P4D 5e201067 PUD 5e205067 PMD 16110d063 PTE 8000000162970161 Oops: 0003 [#1] PREEMPT SMP NOPTI CPU: 2 PID: 1824 Comm: irq/134-iwlwifi Not tainted 4.19.33-04308-geea41cf4930f #1 Hardware name: [...] RIP: 0010:memcpy_erms+0x6/0x10 Code: 90 90 90 90 eb 1e 0f 1f 00 48 89 f8 48 89 d1 48 c1 e9 03 83 e2 07 f3 48 a5 89 d1 f3 a4 c3 66 0f 1f 44 00 00 48 89 f8 48 89 d1 <f3> a4 c3 0f 1f 80 00 00 00 00 48 89 f8 48 83 fa 20 72 7e 40 38 fe RSP: 0018:ffffa4630196fc60 EFLAGS: 00010287 RAX: ffff896be2924618 RBX: ffff896bc8ecc600 RCX: 00000000fffb4610 RDX: 00000000fffffff8 RSI: ffff896a835e2a38 RDI: ffff896be2970000 RBP: ffffa4630196fd30 R08: ffff896bc8ecc600 R09: ffff896a83597000 R10: ffff896bd6998400 R11: 000000000200407f R12: ffff896a83597050 R13: 00000000fffffff8 R14: 0000000000000010 R15: ffff896a83597038 FS: 0000000000000000(0000) GS:ffff896be8280000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: ffff896be2970000 CR3: 000000005dc12002 CR4: 00000000003606e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: iwl_mvm_rx_mpdu_mq+0xb51/0x121b [iwlmvm] iwl_pcie_rx_handle+0x58c/0xa89 [iwlwifi] iwl_pcie_irq_rx_msix_handler+0xd9/0x12a [iwlwifi] irq_thread_fn+0x24/0x49 irq_thread+0xb0/0x122 kthread+0x138/0x140 ret_from_fork+0x1f/0x40 Fix that by checking the lengths for correctness and trigger a warning to show that we have received wrong data. Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2019-04-27udp: fix GRO reception in case of length mismatchPaolo Abeni1-4/+5
Currently, the UDP GRO code path does bad things on some edge conditions - Aggregation can happen even on packet with different lengths. Fix the above by rewriting the 'complete' condition for GRO packets. While at it, note explicitly that we allow merging the first packet per burst below gso_size. Reported-by: Sean Tong <seantong114@gmail.com> Fixes: e20cf8d3f1f7 ("udp: implement GRO for plain UDP sockets.") Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-27net/tls: fix copy to fragments in reencryptJakub Kicinski1-7/+22
Fragments may contain data from other records so we have to account for that when we calculate the destination and max length of copy we can perform. Note that 'offset' is the offset within the message, so it can't be passed as offset within the frag.. Here skb_store_bits() would have realised the call is wrong and simply not copy data. Fixes: 4799ac81e52a ("tls: Add rx inline crypto offload") Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: John Hurley <john.hurley@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-27net/tls: don't copy negative amounts of data in reencryptJakub Kicinski1-6/+8
There is no guarantee the record starts before the skb frags. If we don't check for this condition copy amount will get negative, leading to reads and writes to random memory locations. Familiar hilarity ensues. Fixes: 4799ac81e52a ("tls: Add rx inline crypto offload") Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: John Hurley <john.hurley@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-27bnxt_en: Fix uninitialized variable usage in bnxt_rx_pkt().Michael Chan1-4/+5
In bnxt_rx_pkt(), if the driver encounters BD errors, it will recycle the buffers and jump to the end where the uninitailized variable "len" is referenced. Fix it by adding a new jump label that will skip the length update. This is the most correct fix since the length may not be valid when we get this type of error. Fixes: 6a8788f25625 ("bnxt_en: add support for software dynamic interrupt moderation") Reported-by: Nathan Chancellor <natechancellor@gmail.com> Cc: Nathan Chancellor <natechancellor@gmail.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Reviewed-by: Nathan Chancellor <natechancellor@gmail.com> Tested-by: Nathan Chancellor <natechancellor@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-27bnxt_en: Fix statistics context reservation logic.Michael Chan1-8/+6
In an earlier commit that fixes the number of stats contexts to reserve for the RDMA driver, we added a function parameter to pass in the number of stats contexts to all the relevant functions. The passed in parameter should have been used to set the enables field of the firmware message. Fixes: 780baad44f0f ("bnxt_en: Reserve 1 stat_ctx for RDMA driver.") Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-27bnxt_en: Pass correct extended TX port statistics size to firmware.Michael Chan1-2/+6
If driver determines that extended TX port statistics are not supported or allocation of the data structure fails, make sure to pass 0 TX stats size to firmware to disable it. The firmware returned TX stats size should also be set to 0 for consistency. This will prevent bnxt_get_ethtool_stats() from accessing the NULL TX stats pointer in case there is mismatch between firmware and driver. Fixes: 36e53349b60b ("bnxt_en: Add additional extended port statistics.") Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-27bnxt_en: Fix possible crash in bnxt_hwrm_ring_free() under error conditions.Michael Chan1-6/+6
If we encounter errors during open and proceed to clean up, bnxt_hwrm_ring_free() may crash if the rings we try to free have never been allocated. bnxt_cp_ring_for_rx() or bnxt_cp_ring_for_tx() may reference pointers that have not been allocated. Fix it by checking for valid fw_ring_id first before calling bnxt_cp_ring_for_rx() or bnxt_cp_ring_for_tx(). Fixes: 2c61d2117ecb ("bnxt_en: Add helper functions to get firmware CP ring ID.") Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-27bnxt_en: Free short FW command HWRM memory in error path in bnxt_init_one()Vasundhara Volam1-0/+1
In the bnxt_init_one() error path, short FW command request memory is not freed. This patch fixes it. Fixes: e605db801bde ("bnxt_en: Support for Short Firmware Message") Signed-off-by: Vasundhara Volam <vasundhara-v.volam@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-27bnxt_en: Improve multicast address setup logic.Michael Chan1-1/+8
The driver builds a list of multicast addresses and sends it to the firmware when the driver's ndo_set_rx_mode() is called. In rare cases, the firmware can fail this call if internal resources to add multicast addresses are exhausted. In that case, we should try the call again by setting the ALL_MCAST flag which is more guaranteed to succeed. Fixes: c0c050c58d84 ("bnxt_en: New Broadcom ethernet driver.") Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-26net: phy: marvell: Fix buffer overrun with stats countersAndrew Lunn1-2/+4
marvell_get_sset_count() returns how many statistics counters there are. If the PHY supports fibre, there are 3, otherwise two. marvell_get_strings() does not make this distinction, and always returns 3 strings. This then often results in writing past the end of the buffer for the strings. Fixes: 2170fef78a40 ("Marvell phy: add field to get errors from fiber link.") Signed-off-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-26genetlink: use idr_alloc_cyclic for family->id assignmentMarcel Holtmann1-2/+2
When allocating the next family->id it makes more sense to use idr_alloc_cyclic to avoid re-using a previously used family->id as much as possible. Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-26qmi_wwan: new Wistron, ZTE and D-Link devicesBjørn Mork1-0/+10
Adding device entries found in vendor modified versions of this driver. Function maps for some of the devices follow: WNC D16Q1, D16Q5, D18Q1 LTE CAT3 module (1435:0918) MI_00 Qualcomm HS-USB Diagnostics MI_01 Android Debug interface MI_02 Qualcomm HS-USB Modem MI_03 Qualcomm Wireless HS-USB Ethernet Adapter MI_04 Qualcomm Wireless HS-USB Ethernet Adapter MI_05 Qualcomm Wireless HS-USB Ethernet Adapter MI_06 USB Mass Storage Device T: Bus=02 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 2 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=1435 ProdID=0918 Rev= 2.32 S: Manufacturer=Android S: Product=Android S: SerialNumber=0123456789ABCDEF C:* #Ifs= 7 Cfg#= 1 Atr=80 MxPwr=500mA I:* If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 1 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=42 Prot=01 Driver=(none) E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=84(I) Atr=03(Int.) MxPS= 64 Ivl=32ms E: Ad=83(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=qmi_wwan E: Ad=86(I) Atr=03(Int.) MxPS= 64 Ivl=32ms E: Ad=85(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=qmi_wwan E: Ad=88(I) Atr=03(Int.) MxPS= 64 Ivl=32ms E: Ad=87(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 5 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=qmi_wwan E: Ad=8a(I) Atr=03(Int.) MxPS= 64 Ivl=32ms E: Ad=89(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=06(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms WNC D18 LTE CAT3 module (1435:d182) MI_00 Qualcomm HS-USB Diagnostics MI_01 Androd Debug interface MI_02 Qualcomm HS-USB Modem MI_03 Qualcomm HS-USB NMEA MI_04 Qualcomm Wireless HS-USB Ethernet Adapter MI_05 Qualcomm Wireless HS-USB Ethernet Adapter MI_06 USB Mass Storage Device ZM8510/ZM8620/ME3960 (19d2:0396) MI_00 ZTE Mobile Broadband Diagnostics Port MI_01 ZTE Mobile Broadband AT Port MI_02 ZTE Mobile Broadband Modem MI_03 ZTE Mobile Broadband NDIS Port (qmi_wwan) MI_04 ZTE Mobile Broadband ADB Port ME3620_X (19d2:1432) MI_00 ZTE Diagnostics Device MI_01 ZTE UI AT Interface MI_02 ZTE Modem Device MI_03 ZTE Mobile Broadband Network Adapter MI_04 ZTE Composite ADB Interface Reported-by: Lars Melin <larsm17@gmail.com> Signed-off-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-26net: ethernet: stmmac: manage the get_irq probe defer caseFabien Dessenne1-0/+3
Manage the -EPROBE_DEFER error case for "stm32_pwr_wakeup" IRQ. Signed-off-by: Fabien Dessenne <fabien.dessenne@st.com> Acked-by: Alexandre TORGUE <alexandre.torgue@st.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-26l2tp: use rcu_dereference_sk_user_data() in l2tp_udp_encap_recv()Eric Dumazet1-1/+1
Canonical way to fetch sk_user_data from an encap_rcv() handler called from UDP stack in rcu protected section is to use rcu_dereference_sk_user_data(), otherwise compiler might read it multiple times. Fixes: d00fa9adc528 ("il2tp: fix races with tunnel socket close") Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: James Chapman <jchapman@katalix.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-25bpf: Fix preempt_enable_no_resched() abusePeter Zijlstra1-1/+1
Unless the very next line is schedule(), or implies it, one must not use preempt_enable_no_resched(). It can cause a preemption to go missing and thereby cause arbitrary delays, breaking the PREEMPT=y invariant. Cc: Roman Gushchin <guro@fb.com> Cc: Alexei Starovoitov <ast@kernel.org> Cc: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2019-04-25selftests/bpf: test cases for pkt/null checks in subprogsPaul Chaignon2-0/+47
The first test case, for pointer null checks, is equivalent to the following pseudo-code. It checks that the verifier does not complain on line 6 and recognizes that ptr isn't null. 1: ptr = bpf_map_lookup_elem(map, &key); 2: ret = subprog(ptr) { 3: return ptr != NULL; 4: } 5: if (ret) 6: value = *ptr; The second test case, for packet bound checks, is equivalent to the following pseudo-code. It checks that the verifier does not complain on line 7 and recognizes that the packet is at least 1 byte long. 1: pkt_end = ctx.pkt_end; 2: ptr = ctx.pkt + 8; 3: ret = subprog(ptr, pkt_end) { 4: return ptr <= pkt_end; 5: } 6: if (ret) 7: value = *(u8 *)ctx.pkt; Signed-off-by: Paul Chaignon <paul.chaignon@orange.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2019-04-25bpf: mark registers in all frames after pkt/null checksPaul Chaignon1-30/+46
In case of a null check on a pointer inside a subprog, we should mark all registers with this pointer as either safe or unknown, in both the current and previous frames. Currently, only spilled registers and registers in the current frame are marked. Packet bound checks in subprogs have the same issue. This patch fixes it to mark registers in previous frames as well. A good reproducer for null checks looks as follow: 1: ptr = bpf_map_lookup_elem(map, &key); 2: ret = subprog(ptr) { 3: return ptr != NULL; 4: } 5: if (ret) 6: value = *ptr; With the above, the verifier will complain on line 6 because it sees ptr as map_value_or_null despite the null check in subprog 1. Note that this patch fixes another resulting bug when using bpf_sk_release(): 1: sk = bpf_sk_lookup_tcp(...); 2: subprog(sk) { 3: if (sk) 4: bpf_sk_release(sk); 5: } 6: if (!sk) 7: return 0; 8: return 1; In the above, mark_ptr_or_null_regs will warn on line 6 because it will try to free the reference state, even though it was already freed on line 3. Fixes: f4d7e40a5b71 ("bpf: introduce function calls (verification)") Signed-off-by: Paul Chaignon <paul.chaignon@orange.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2019-04-25libbpf: add binary to gitignoreMatteo Croce1-0/+1
Some binaries are generated when building libbpf from tools/lib/bpf/, namely libbpf.so.0.0.2 and libbpf.so.0. Add them to the local .gitignore. Signed-off-by: Matteo Croce <mcroce@redhat.com> Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com> Acked-by: Song Liu <songliubraving@fb.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2019-04-25tools: bpftool: fix infinite loop in map createAlban Crequy1-0/+3
"bpftool map create" has an infinite loop on "while (argc)". The error case is missing. Symptoms: when forgetting to type the keyword 'type' in front of 'hash': $ sudo bpftool map create /sys/fs/bpf/dir/foobar hash key 8 value 8 entries 128 (infinite loop, taking all the CPU) ^C After the patch: $ sudo bpftool map create /sys/fs/bpf/dir/foobar hash key 8 value 8 entries 128 Error: unknown arg hash Fixes: 0b592b5a01be ("tools: bpftool: add map create command") Signed-off-by: Alban Crequy <alban@kinvolk.io> Reviewed-by: Quentin Monnet <quentin.monnet@netronome.com> Acked-by: Song Liu <songliubraving@fb.com> Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2019-04-25MIPS: eBPF: Make ebpf_to_mips_reg() staticYueHaibing1-2/+3
Fix sparse warning: arch/mips/net/ebpf_jit.c:196:5: warning: symbol 'ebpf_to_mips_reg' was not declared. Should it be static? Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: YueHaibing <yuehaibing@huawei.com> Acked-by: Yonghong Song <yhs@fb.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2019-04-25mwifiex: Make resume actually do something useful again on SDIO cardsDouglas Anderson1-1/+1
The commit fc3a2fcaa1ba ("mwifiex: use atomic bitops to represent adapter status variables") had a fairly straightforward bug in it. It contained this bit of diff: - if (!adapter->is_suspended) { + if (test_bit(MWIFIEX_IS_SUSPENDED, &adapter->work_flags)) { As you can see the patch missed the "!" when converting to the atomic bitops. This meant that the resume hasn't done anything at all since that commit landed and suspend/resume for mwifiex SDIO cards has been totally broken. After fixing this mwifiex suspend/resume appears to work again, at least with the simple testing I've done. Fixes: fc3a2fcaa1ba ("mwifiex: use atomic bitops to represent adapter status variables") Cc: <stable@vger.kernel.org> Signed-off-by: Douglas Anderson <dianders@chromium.org> Reviewed-by: Brian Norris <briannorris@chromium.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-04-24ipv4: add sanity checks in ipv4_link_failure()Eric Dumazet1-9/+23
Before calling __ip_options_compile(), we need to ensure the network header is a an IPv4 one, and that it is already pulled in skb->head. RAW sockets going through a tunnel can end up calling ipv4_link_failure() with total garbage in the skb, or arbitrary lengthes. syzbot report : BUG: KASAN: stack-out-of-bounds in memcpy include/linux/string.h:355 [inline] BUG: KASAN: stack-out-of-bounds in __ip_options_echo+0x294/0x1120 net/ipv4/ip_options.c:123 Write of size 69 at addr ffff888096abf068 by task syz-executor.4/9204 CPU: 0 PID: 9204 Comm: syz-executor.4 Not tainted 5.1.0-rc5+ #77 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Call Trace: __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0x172/0x1f0 lib/dump_stack.c:113 print_address_description.cold+0x7c/0x20d mm/kasan/report.c:187 kasan_report.cold+0x1b/0x40 mm/kasan/report.c:317 check_memory_region_inline mm/kasan/generic.c:185 [inline] check_memory_region+0x123/0x190 mm/kasan/generic.c:191 memcpy+0x38/0x50 mm/kasan/common.c:133 memcpy include/linux/string.h:355 [inline] __ip_options_echo+0x294/0x1120 net/ipv4/ip_options.c:123 __icmp_send+0x725/0x1400 net/ipv4/icmp.c:695 ipv4_link_failure+0x29f/0x550 net/ipv4/route.c:1204 dst_link_failure include/net/dst.h:427 [inline] vti6_xmit net/ipv6/ip6_vti.c:514 [inline] vti6_tnl_xmit+0x10d4/0x1c0c net/ipv6/ip6_vti.c:553 __netdev_start_xmit include/linux/netdevice.h:4414 [inline] netdev_start_xmit include/linux/netdevice.h:4423 [inline] xmit_one net/core/dev.c:3292 [inline] dev_hard_start_xmit+0x1b2/0x980 net/core/dev.c:3308 __dev_queue_xmit+0x271d/0x3060 net/core/dev.c:3878 dev_queue_xmit+0x18/0x20 net/core/dev.c:3911 neigh_direct_output+0x16/0x20 net/core/neighbour.c:1527 neigh_output include/net/neighbour.h:508 [inline] ip_finish_output2+0x949/0x1740 net/ipv4/ip_output.c:229 ip_finish_output+0x73c/0xd50 net/ipv4/ip_output.c:317 NF_HOOK_COND include/linux/netfilter.h:278 [inline] ip_output+0x21f/0x670 net/ipv4/ip_output.c:405 dst_output include/net/dst.h:444 [inline] NF_HOOK include/linux/netfilter.h:289 [inline] raw_send_hdrinc net/ipv4/raw.c:432 [inline] raw_sendmsg+0x1d2b/0x2f20 net/ipv4/raw.c:663 inet_sendmsg+0x147/0x5d0 net/ipv4/af_inet.c:798 sock_sendmsg_nosec net/socket.c:651 [inline] sock_sendmsg+0xdd/0x130 net/socket.c:661 sock_write_iter+0x27c/0x3e0 net/socket.c:988 call_write_iter include/linux/fs.h:1866 [inline] new_sync_write+0x4c7/0x760 fs/read_write.c:474 __vfs_write+0xe4/0x110 fs/read_write.c:487 vfs_write+0x20c/0x580 fs/read_write.c:549 ksys_write+0x14f/0x2d0 fs/read_write.c:599 __do_sys_write fs/read_write.c:611 [inline] __se_sys_write fs/read_write.c:608 [inline] __x64_sys_write+0x73/0xb0 fs/read_write.c:608 do_syscall_64+0x103/0x610 arch/x86/entry/common.c:290 entry_SYSCALL_64_after_hwframe+0x49/0xbe RIP: 0033:0x458c29 Code: ad b8 fb ff c3 66 2e 0f 1f 84 00 00 00 00 00 66 90 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 0f 83 7b b8 fb ff c3 66 2e 0f 1f 84 00 00 00 00 RSP: 002b:00007f293b44bc78 EFLAGS: 00000246 ORIG_RAX: 0000000000000001 RAX: ffffffffffffffda RBX: 0000000000000003 RCX: 0000000000458c29 RDX: 0000000000000014 RSI: 00000000200002c0 RDI: 0000000000000003 RBP: 000000000073bf00 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 00007f293b44c6d4 R13: 00000000004c8623 R14: 00000000004ded68 R15: 00000000ffffffff The buggy address belongs to the page: page:ffffea00025aafc0 count:0 mapcount:0 mapping:0000000000000000 index:0x0 flags: 0x1fffc0000000000() raw: 01fffc0000000000 0000000000000000 ffffffff025a0101 0000000000000000 raw: 0000000000000000 0000000000000000 00000000ffffffff 0000000000000000 page dumped because: kasan: bad access detected Memory state around the buggy address: ffff888096abef80: 00 00 00 f2 f2 f2 f2 f2 00 00 00 00 00 00 00 f2 ffff888096abf000: f2 f2 f2 f2 00 00 00 00 00 00 00 00 00 00 00 00 >ffff888096abf080: 00 00 f3 f3 f3 f3 00 00 00 00 00 00 00 00 00 00 ^ ffff888096abf100: 00 00 00 00 f1 f1 f1 f1 00 00 f3 f3 00 00 00 00 ffff888096abf180: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 Fixes: ed0de45a1008 ("ipv4: recompile ip options in ipv4_link_failure") Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Stephen Suryaputra <ssuryaextr@gmail.com> Acked-by: Willem de Bruijn <willemb@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-24net/rose: fix unbound loop in rose_loopback_timer()Eric Dumazet1-11/+16
This patch adds a limit on the number of skbs that fuzzers can queue into loopback_queue. 1000 packets for rose loopback seems more than enough. Then, since we now have multiple cpus in most linux hosts, we also need to limit the number of skbs rose_loopback_timer() can dequeue at each round. rose_loopback_queue() can be drop-monitor friendly, calling consume_skb() or kfree_skb() appropriately. Finally, use mod_timer() instead of del_timer() + add_timer() syzbot report was : rcu: INFO: rcu_preempt self-detected stall on CPU rcu: 0-...!: (10499 ticks this GP) idle=536/1/0x4000000000000002 softirq=103291/103291 fqs=34 rcu: (t=10500 jiffies g=140321 q=323) rcu: rcu_preempt kthread starved for 10426 jiffies! g140321 f0x0 RCU_GP_WAIT_FQS(5) ->state=0x402 ->cpu=1 rcu: RCU grace-period kthread stack dump: rcu_preempt I29168 10 2 0x80000000 Call Trace: context_switch kernel/sched/core.c:2877 [inline] __schedule+0x813/0x1cc0 kernel/sched/core.c:3518 schedule+0x92/0x180 kernel/sched/core.c:3562 schedule_timeout+0x4db/0xfd0 kernel/time/timer.c:1803 rcu_gp_fqs_loop kernel/rcu/tree.c:1971 [inline] rcu_gp_kthread+0x962/0x17b0 kernel/rcu/tree.c:2128 kthread+0x357/0x430 kernel/kthread.c:253 ret_from_fork+0x3a/0x50 arch/x86/entry/entry_64.S:352 NMI backtrace for cpu 0 CPU: 0 PID: 7632 Comm: kworker/0:4 Not tainted 5.1.0-rc5+ #172 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Workqueue: events iterate_cleanup_work Call Trace: <IRQ> __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0x172/0x1f0 lib/dump_stack.c:113 nmi_cpu_backtrace.cold+0x63/0xa4 lib/nmi_backtrace.c:101 nmi_trigger_cpumask_backtrace+0x1be/0x236 lib/nmi_backtrace.c:62 arch_trigger_cpumask_backtrace+0x14/0x20 arch/x86/kernel/apic/hw_nmi.c:38 trigger_single_cpu_backtrace include/linux/nmi.h:164 [inline] rcu_dump_cpu_stacks+0x183/0x1cf kernel/rcu/tree.c:1223 print_cpu_stall kernel/rcu/tree.c:1360 [inline] check_cpu_stall kernel/rcu/tree.c:1434 [inline] rcu_pending kernel/rcu/tree.c:3103 [inline] rcu_sched_clock_irq.cold+0x500/0xa4a kernel/rcu/tree.c:2544 update_process_times+0x32/0x80 kernel/time/timer.c:1635 tick_sched_handle+0xa2/0x190 kernel/time/tick-sched.c:161 tick_sched_timer+0x47/0x130 kernel/time/tick-sched.c:1271 __run_hrtimer kernel/time/hrtimer.c:1389 [inline] __hrtimer_run_queues+0x33e/0xde0 kernel/time/hrtimer.c:1451 hrtimer_interrupt+0x314/0x770 kernel/time/hrtimer.c:1509 local_apic_timer_interrupt arch/x86/kernel/apic/apic.c:1035 [inline] smp_apic_timer_interrupt+0x120/0x570 arch/x86/kernel/apic/apic.c:1060 apic_timer_interrupt+0xf/0x20 arch/x86/entry/entry_64.S:807 RIP: 0010:__sanitizer_cov_trace_pc+0x0/0x50 kernel/kcov.c:95 Code: 89 25 b4 6e ec 08 41 bc f4 ff ff ff e8 cd 5d ea ff 48 c7 05 9e 6e ec 08 00 00 00 00 e9 a4 e9 ff ff 90 90 90 90 90 90 90 90 90 <55> 48 89 e5 48 8b 75 08 65 48 8b 04 25 00 ee 01 00 65 8b 15 c8 60 RSP: 0018:ffff8880ae807ce0 EFLAGS: 00000286 ORIG_RAX: ffffffffffffff13 RAX: ffff88806fd40640 RBX: dffffc0000000000 RCX: ffffffff863fbc56 RDX: 0000000000000100 RSI: ffffffff863fbc1d RDI: ffff88808cf94228 RBP: ffff8880ae807d10 R08: ffff88806fd40640 R09: ffffed1015d00f8b R10: ffffed1015d00f8a R11: 0000000000000003 R12: ffff88808cf941c0 R13: 00000000fffff034 R14: ffff8882166cd840 R15: 0000000000000000 rose_loopback_timer+0x30d/0x3f0 net/rose/rose_loopback.c:91 call_timer_fn+0x190/0x720 kernel/time/timer.c:1325 expire_timers kernel/time/timer.c:1362 [inline] __run_timers kernel/time/timer.c:1681 [inline] __run_timers kernel/time/timer.c:1649 [inline] run_timer_softirq+0x652/0x1700 kernel/time/timer.c:1694 __do_softirq+0x266/0x95a kernel/softirq.c:293 do_softirq_own_stack+0x2a/0x40 arch/x86/entry/entry_64.S:1027 Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Signed-off-by: Eric Dumazet <edumazet@google.com> Reported-by: syzbot <syzkaller@googlegroups.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-24rxrpc: fix race condition in rxrpc_input_packet()Eric Dumazet2-5/+10
After commit 5271953cad31 ("rxrpc: Use the UDP encap_rcv hook"), rxrpc_input_packet() is directly called from lockless UDP receive path, under rcu_read_lock() protection. It must therefore use RCU rules : - udp_sk->sk_user_data can be cleared at any point in this function. rcu_dereference_sk_user_data() is what we need here. - Also, since sk_user_data might have been set in rxrpc_open_socket() we must observe a proper RCU grace period before kfree(local) in rxrpc_lookup_local() v4: @local can be NULL in xrpc_lookup_local() as reported by kbuild test robot <lkp@intel.com> and Julia Lawall <julia.lawall@lip6.fr>, thanks ! v3,v2 : addressed David Howells feedback, thanks ! syzbot reported : kasan: CONFIG_KASAN_INLINE enabled kasan: GPF could be caused by NULL-ptr deref or user memory access general protection fault: 0000 [#1] PREEMPT SMP KASAN CPU: 0 PID: 19236 Comm: syz-executor703 Not tainted 5.1.0-rc6 #79 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 RIP: 0010:__lock_acquire+0xbef/0x3fb0 kernel/locking/lockdep.c:3573 Code: 00 0f 85 a5 1f 00 00 48 81 c4 10 01 00 00 5b 41 5c 41 5d 41 5e 41 5f 5d c3 48 b8 00 00 00 00 00 fc ff df 4c 89 ea 48 c1 ea 03 <80> 3c 02 00 0f 85 4a 21 00 00 49 81 7d 00 20 54 9c 89 0f 84 cf f4 RSP: 0018:ffff88809d7aef58 EFLAGS: 00010002 RAX: dffffc0000000000 RBX: 0000000000000000 RCX: 0000000000000000 RDX: 0000000000000026 RSI: 0000000000000000 RDI: 0000000000000001 RBP: ffff88809d7af090 R08: 0000000000000001 R09: 0000000000000001 R10: ffffed1015d05bc7 R11: ffff888089428600 R12: 0000000000000000 R13: 0000000000000130 R14: 0000000000000001 R15: 0000000000000001 FS: 00007f059044d700(0000) GS:ffff8880ae800000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00000000004b6040 CR3: 00000000955ca000 CR4: 00000000001406f0 Call Trace: lock_acquire+0x16f/0x3f0 kernel/locking/lockdep.c:4211 __raw_spin_lock_irqsave include/linux/spinlock_api_smp.h:110 [inline] _raw_spin_lock_irqsave+0x95/0xcd kernel/locking/spinlock.c:152 skb_queue_tail+0x26/0x150 net/core/skbuff.c:2972 rxrpc_reject_packet net/rxrpc/input.c:1126 [inline] rxrpc_input_packet+0x4a0/0x5536 net/rxrpc/input.c:1414 udp_queue_rcv_one_skb+0xaf2/0x1780 net/ipv4/udp.c:2011 udp_queue_rcv_skb+0x128/0x730 net/ipv4/udp.c:2085 udp_unicast_rcv_skb.isra.0+0xb9/0x360 net/ipv4/udp.c:2245 __udp4_lib_rcv+0x701/0x2ca0 net/ipv4/udp.c:2301 udp_rcv+0x22/0x30 net/ipv4/udp.c:2482 ip_protocol_deliver_rcu+0x60/0x8f0 net/ipv4/ip_input.c:208 ip_local_deliver_finish+0x23b/0x390 net/ipv4/ip_input.c:234 NF_HOOK include/linux/netfilter.h:289 [inline] NF_HOOK include/linux/netfilter.h:283 [inline] ip_local_deliver+0x1e9/0x520 net/ipv4/ip_input.c:255 dst_input include/net/dst.h:450 [inline] ip_rcv_finish+0x1e1/0x300 net/ipv4/ip_input.c:413 NF_HOOK include/linux/netfilter.h:289 [inline] NF_HOOK include/linux/netfilter.h:283 [inline] ip_rcv+0xe8/0x3f0 net/ipv4/ip_input.c:523 __netif_receive_skb_one_core+0x115/0x1a0 net/core/dev.c:4987 __netif_receive_skb+0x2c/0x1c0 net/core/dev.c:5099 netif_receive_skb_internal+0x117/0x660 net/core/dev.c:5202 napi_frags_finish net/core/dev.c:5769 [inline] napi_gro_frags+0xade/0xd10 net/core/dev.c:5843 tun_get_user+0x2f24/0x3fb0 drivers/net/tun.c:1981 tun_chr_write_iter+0xbd/0x156 drivers/net/tun.c:2027 call_write_iter include/linux/fs.h:1866 [inline] do_iter_readv_writev+0x5e1/0x8e0 fs/read_write.c:681 do_iter_write fs/read_write.c:957 [inline] do_iter_write+0x184/0x610 fs/read_write.c:938 vfs_writev+0x1b3/0x2f0 fs/read_write.c:1002 do_writev+0x15e/0x370 fs/read_write.c:1037 __do_sys_writev fs/read_write.c:1110 [inline] __se_sys_writev fs/read_write.c:1107 [inline] __x64_sys_writev+0x75/0xb0 fs/read_write.c:1107 do_syscall_64+0x103/0x610 arch/x86/entry/common.c:290 entry_SYSCALL_64_after_hwframe+0x49/0xbe Fixes: 5271953cad31 ("rxrpc: Use the UDP encap_rcv hook") Signed-off-by: Eric Dumazet <edumazet@google.com> Reported-by: syzbot <syzkaller@googlegroups.com> Acked-by: David Howells <dhowells@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-24MAINTAINERS: LEDs: Add designated reviewer for LED subsystemDan Murphy1-0/+1
Add a designated reviewer for the LED subsystem as there are already two maintainers assigned. Signed-off-by: Dan Murphy <dmurphy@ti.com> Acked-by: Pavel Machek <pavel@ucw.cz> Signed-off-by: Jacek Anaszewski <jacek.anaszewski@gmail.com>
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.