aboutsummaryrefslogtreecommitdiffstats
path: root/.gitattributes (unfollow)
AgeCommit message (Collapse)AuthorFilesLines
2018-09-05be2net: Fix memory leak in be_cmd_get_profile_config()Petr Oros1-1/+1
DMA allocated memory is lost in be_cmd_get_profile_config() when we call it with non-NULL port_res parameter. Signed-off-by: Petr Oros <poros@redhat.com> Reviewed-by: Ivan Vecera <ivecera@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-05mlxsw: spectrum_buffers: Set up a dedicated pool for BUM trafficPetr Machata1-8/+8
MC-aware mode was recently enabled by mlxsw on Spectrum switches in commit 7b8195306694 ("mlxsw: spectrum: Configure MC-aware mode on mlxsw ports"). Unfortunately, testing has shown that the fix is incomplete and in the presented form actually makes the problem even worse, because any amount of MC traffic causes UC disruption. The reason for this is that currently, mlxsw configures the MC-specific TCs (8..15) to map to pool 0. It also configures a maximum buffer size of 0, but for MC traffic that maximum is disregarded and not part of the quota. Therefore MC traffic is always admitted to the egress buffer. Fix the configuration by directing the MC TCs into pool 15, which is dedicated to MC traffic and recognized as such by the silicon. Fixes: 7b8195306694 ("mlxsw: spectrum: Configure MC-aware mode on mlxsw ports") Signed-off-by: Petr Machata <petrm@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-04net: phy: sfp: Handle unimplemented hwmon limits and alarmsAndrew Lunn1-4/+16
Not all SFPs implement the registers containing sensor limits and alarms. Luckily, there is a bit indicating if they are implemented or not. Add checking for this bit, when deciding if the hwmon attributes should be visible. Fixes: 1323061a018a ("net: phy: sfp: Add HWMON support for module sensors") Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-04net: sched: action_ife: take reference to meta moduleVlad Buslov1-1/+15
Recent refactoring of add_metainfo() caused use_all_metadata() to add metainfo to ife action metalist without taking reference to module. This causes warning in module_put called from ife action cleanup function. Implement add_metainfo_and_get_ops() function that returns with reference to module taken if metainfo was added successfully, and call it from use_all_metadata(), instead of calling __add_metainfo() directly. Example warning: [ 646.344393] WARNING: CPU: 1 PID: 2278 at kernel/module.c:1139 module_put+0x1cb/0x230 [ 646.352437] Modules linked in: act_meta_skbtcindex act_meta_mark act_meta_skbprio act_ife ife veth nfsv3 nfs fscache xt_CHECKSUM iptable_mangle ipt_MASQUERADE iptable_nat nf_nat_ipv4 nf_nat xt_conntrack nf_conntrack nf_defrag_ipv6 nf_defrag_ipv4 libcrc32c tun ebtable_filter ebtables ip6table_filter ip6_tables bridge stp llc mlx5_ib ib_uverbs ib_core intel_rapl sb_edac x86_pkg_temp_thermal mlx5_core coretemp kvm_intel kvm nfsd igb irqbypass crct10dif_pclmul devlink crc32_pclmul mei_me joydev ses crc32c_intel enclosure auth_rpcgss i2c_algo_bit ioatdma ptp mei pps_core ghash_clmulni_intel iTCO_wdt iTCO_vendor_support pcspkr dca ipmi_ssif lpc_ich target_core_mod i2c_i801 ipmi_si ipmi_devintf pcc_cpufreq wmi ipmi_msghandler nfs_acl lockd acpi_pad acpi_power_meter grace sunrpc mpt3sas raid_class scsi_transport_sas [ 646.425631] CPU: 1 PID: 2278 Comm: tc Not tainted 4.19.0-rc1+ #799 [ 646.432187] Hardware name: Supermicro SYS-2028TP-DECR/X10DRT-P, BIOS 2.0b 03/30/2017 [ 646.440595] RIP: 0010:module_put+0x1cb/0x230 [ 646.445238] Code: f3 66 94 02 e8 26 ff fa ff 85 c0 74 11 0f b6 1d 51 30 94 02 80 fb 01 77 60 83 e3 01 74 13 65 ff 0d 3a 83 db 73 e9 2b ff ff ff <0f> 0b e9 00 ff ff ff e8 59 01 fb ff 85 c0 75 e4 48 c7 c2 20 62 6b [ 646.464997] RSP: 0018:ffff880354d37068 EFLAGS: 00010286 [ 646.470599] RAX: 0000000000000000 RBX: ffffffffc0a52518 RCX: ffffffff8c2668db [ 646.478118] RDX: 0000000000000003 RSI: dffffc0000000000 RDI: ffffffffc0a52518 [ 646.485641] RBP: ffffffffc0a52180 R08: fffffbfff814a4a4 R09: fffffbfff814a4a3 [ 646.493164] R10: ffffffffc0a5251b R11: fffffbfff814a4a4 R12: 1ffff1006a9a6e0d [ 646.500687] R13: 00000000ffffffff R14: ffff880362bab890 R15: dead000000000100 [ 646.508213] FS: 00007f4164c99800(0000) GS:ffff88036fe40000(0000) knlGS:0000000000000000 [ 646.516961] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 646.523080] CR2: 00007f41638b8420 CR3: 0000000351df0004 CR4: 00000000001606e0 [ 646.530595] Call Trace: [ 646.533408] ? find_symbol_in_section+0x260/0x260 [ 646.538509] tcf_ife_cleanup+0x11b/0x200 [act_ife] [ 646.543695] tcf_action_cleanup+0x29/0xa0 [ 646.548078] __tcf_action_put+0x5a/0xb0 [ 646.552289] ? nla_put+0x65/0xe0 [ 646.555889] __tcf_idr_release+0x48/0x60 [ 646.560187] tcf_generic_walker+0x448/0x6b0 [ 646.564764] ? tcf_action_dump_1+0x450/0x450 [ 646.569411] ? __lock_is_held+0x84/0x110 [ 646.573720] ? tcf_ife_walker+0x10c/0x20f [act_ife] [ 646.578982] tca_action_gd+0x972/0xc40 [ 646.583129] ? tca_get_fill.constprop.17+0x250/0x250 [ 646.588471] ? mark_lock+0xcf/0x980 [ 646.592324] ? check_chain_key+0x140/0x1f0 [ 646.596832] ? debug_show_all_locks+0x240/0x240 [ 646.601839] ? memset+0x1f/0x40 [ 646.605350] ? nla_parse+0xca/0x1a0 [ 646.609217] tc_ctl_action+0x215/0x230 [ 646.613339] ? tcf_action_add+0x220/0x220 [ 646.617748] rtnetlink_rcv_msg+0x56a/0x6d0 [ 646.622227] ? rtnl_fdb_del+0x3f0/0x3f0 [ 646.626466] netlink_rcv_skb+0x18d/0x200 [ 646.630752] ? rtnl_fdb_del+0x3f0/0x3f0 [ 646.634959] ? netlink_ack+0x500/0x500 [ 646.639106] netlink_unicast+0x2d0/0x370 [ 646.643409] ? netlink_attachskb+0x340/0x340 [ 646.648050] ? _copy_from_iter_full+0xe9/0x3e0 [ 646.652870] ? import_iovec+0x11e/0x1c0 [ 646.657083] netlink_sendmsg+0x3b9/0x6a0 [ 646.661388] ? netlink_unicast+0x370/0x370 [ 646.665877] ? netlink_unicast+0x370/0x370 [ 646.670351] sock_sendmsg+0x6b/0x80 [ 646.674212] ___sys_sendmsg+0x4a1/0x520 [ 646.678443] ? copy_msghdr_from_user+0x210/0x210 [ 646.683463] ? lock_downgrade+0x320/0x320 [ 646.687849] ? debug_show_all_locks+0x240/0x240 [ 646.692760] ? do_raw_spin_unlock+0xa2/0x130 [ 646.697418] ? _raw_spin_unlock+0x24/0x30 [ 646.701798] ? __handle_mm_fault+0x1819/0x1c10 [ 646.706619] ? __pmd_alloc+0x320/0x320 [ 646.710738] ? debug_show_all_locks+0x240/0x240 [ 646.715649] ? restore_nameidata+0x7b/0xa0 [ 646.720117] ? check_chain_key+0x140/0x1f0 [ 646.724590] ? check_chain_key+0x140/0x1f0 [ 646.729070] ? __fget_light+0xbc/0xd0 [ 646.733121] ? __sys_sendmsg+0xd7/0x150 [ 646.737329] __sys_sendmsg+0xd7/0x150 [ 646.741359] ? __ia32_sys_shutdown+0x30/0x30 [ 646.746003] ? up_read+0x53/0x90 [ 646.749601] ? __do_page_fault+0x484/0x780 [ 646.754105] ? do_syscall_64+0x1e/0x2c0 [ 646.758320] do_syscall_64+0x72/0x2c0 [ 646.762353] entry_SYSCALL_64_after_hwframe+0x49/0xbe [ 646.767776] RIP: 0033:0x7f4163872150 [ 646.771713] Code: 8b 15 3c 7d 2b 00 f7 d8 64 89 02 48 c7 c0 ff ff ff ff eb cd 66 0f 1f 44 00 00 83 3d b9 d5 2b 00 00 75 10 b8 2e 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 31 c3 48 83 ec 08 e8 be cd 00 00 48 89 04 24 [ 646.791474] RSP: 002b:00007ffdef7d6b58 EFLAGS: 00000246 ORIG_RAX: 000000000000002e [ 646.799721] RAX: ffffffffffffffda RBX: 0000000000000024 RCX: 00007f4163872150 [ 646.807240] RDX: 0000000000000000 RSI: 00007ffdef7d6bd0 RDI: 0000000000000003 [ 646.814760] RBP: 000000005b8b9482 R08: 0000000000000001 R09: 0000000000000000 [ 646.822286] R10: 00000000000005e7 R11: 0000000000000246 R12: 00007ffdef7dad20 [ 646.829807] R13: 0000000000000000 R14: 0000000000000000 R15: 0000000000679bc0 [ 646.837360] irq event stamp: 6083 [ 646.841043] hardirqs last enabled at (6081): [<ffffffff8c220a7d>] __call_rcu+0x17d/0x500 [ 646.849882] hardirqs last disabled at (6083): [<ffffffff8c004f06>] trace_hardirqs_off_thunk+0x1a/0x1c [ 646.859775] softirqs last enabled at (5968): [<ffffffff8d4004a1>] __do_softirq+0x4a1/0x6ee [ 646.868784] softirqs last disabled at (6082): [<ffffffffc0a78759>] tcf_ife_cleanup+0x39/0x200 [act_ife] [ 646.878845] ---[ end trace b1b8c12ffe51e657 ]--- Fixes: 5ffe57da29b3 ("act_ife: fix a potential deadlock") Signed-off-by: Vlad Buslov <vladbu@mellanox.com> Acked-by: Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-04act_ife: fix a potential use-after-freeCong Wang1-1/+1
Immediately after module_put(), user could delete this module, so e->ops could be already freed before we call e->ops->release(). Fix this by moving module_put() after ops->release(). Fixes: ef6980b6becb ("introduce IFE action") Cc: Jamal Hadi Salim <jhs@mojatatu.com> Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-04net/mlx5: Fix SQ offset in QPs with small RQTariq Toukan1-2/+3
Correct the formula for calculating the RQ page remainder, which should be in byte granularity. The result will be non-zero only for RQs smaller than PAGE_SIZE, as an RQ size is a power of 2. Divide this by the SQ stride (MLX5_SEND_WQE_BB) to get the SQ offset in strides granularity. Fixes: d7037ad73daa ("net/mlx5: Fix QP fragmented buffer allocation") Signed-off-by: Tariq Toukan <tariqt@mellanox.com> Reviewed-by: Eran Ben Elisha <eranbe@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-03tipc: correct spelling errors for tipc_topsrv_queue_evt() commentsZhenbo Gao1-2/+2
tipc_conn_queue_evt -> tipc_topsrv_queue_evt tipc_send_work -> tipc_conn_send_work tipc_send_to_sock -> tipc_conn_send_to_sock Signed-off-by: Zhenbo Gao <zhenbo.gao@windriver.com> Reviewed-by: Ying Xue <ying.xue@windriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-03tipc: correct spelling errors for struct tipc_bc_base's commentZhenbo Gao1-2/+2
Trivial fix for two spelling mistakes. Signed-off-by: Zhenbo Gao <zhenbo.gao@windriver.com> Reviewed-by: Ying Xue <ying.xue@windriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-03bnxt_en: Do not adjust max_cp_rings by the ones used by RDMA.Michael Chan4-12/+9
Currently, the driver adjusts the bp->hw_resc.max_cp_rings by the number of MSIX vectors used by RDMA. There is one code path in open that needs to check the true max_cp_rings including any used by RDMA. This code is now checking for the reduced max_cp_rings which will fail when the number of cp rings is very small. To fix this in a clean way, we don't adjust max_cp_rings anymore. Instead, we add a helper bnxt_get_max_func_cp_rings_for_en() to get the reduced max_cp_rings when appropriate. Fixes: ec86f14ea506 ("bnxt_en: Add ULP calls to stop and restart IRQs.") Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-03bnxt_en: Clean up unused functions.Michael Chan4-18/+1
Remove unused bnxt_subtract_ulp_resources(). Change bnxt_get_max_func_irqs() to static since it is only locally used. Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-03bnxt_en: Fix firmware signaled resource change logic in open.Michael Chan1-3/+10
When the driver detects that resources have changed during open, it should reset the rx and tx rings to 0. This will properly setup the init sequence to initialize the default rings again. We also need to signal the RDMA driver to stop and clear its interrupts. We then call the RoCE driver to restart if a new set of default rings is successfully reserved. Fixes: 25e1acd6b92b ("bnxt_en: Notify firmware about IF state changes.") Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-03sctp: not traverse asoc trans list if non-ipv6 trans exists for ipv6_flowlabelXin Long1-4/+6
When users set params.spp_address and get a trans, ipv6_flowlabel flag should be applied into this trans. But even if this one is not an ipv6 trans, it should not go to apply it into all other transes of the asoc but simply ignore it. Fixes: 0b0dce7a36fb ("sctp: add spp_ipv6_flowlabel and spp_dscp for sctp_paddrparams") Signed-off-by: Xin Long <lucien.xin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-03sctp: fix invalid reference to the index variable of the iteratorXin Long1-11/+13
Now in sctp_apply_peer_addr_params(), if SPP_IPV6_FLOWLABEL flag is set and trans is NULL, it would use trans as the index variable to traverse transport_addr_list, then trans is set as the last transport of it. Later, if SPP_DSCP flag is set, it would enter into the wrong branch as trans is actually an invalid reference. So fix it by using a new index variable to traverse transport_addr_list for both SPP_DSCP and SPP_IPV6_FLOWLABEL flags process. Fixes: 0b0dce7a36fb ("sctp: add spp_ipv6_flowlabel and spp_dscp for sctp_paddrparams") Reported-by: Julia Lawall <julia.lawall@lip6.fr> Signed-off-by: Xin Long <lucien.xin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-03net/ibm/emac: wrong emac_calc_base call was used by typoIvan Mikhaylov1-3/+3
__emac_calc_base_mr1 was used instead of __emac4_calc_base_mr1 by copy-paste mistake for emac4syn. Fixes: 45d6e545505fd32edb812f085be7de45b6a5c0af ("net/ibm/emac: add 8192 rx/tx fifo size") Signed-off-by: Ivan Mikhaylov <ivan@de.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-03net: sched: null actions array pointer before releasing actionVlad Buslov1-1/+1
Currently, tcf_action_delete() nulls actions array pointer after putting and deleting it. However, if tcf_idr_delete_index() returns an error, pointer to action is not set to null. That results it being released second time in error handling code of tca_action_gd(). Kasan error: [ 807.367755] ================================================================== [ 807.375844] BUG: KASAN: use-after-free in tc_setup_cb_call+0x14e/0x250 [ 807.382763] Read of size 8 at addr ffff88033e636000 by task tc/2732 [ 807.391289] CPU: 0 PID: 2732 Comm: tc Tainted: G W 4.19.0-rc1+ #799 [ 807.399542] Hardware name: Supermicro SYS-2028TP-DECR/X10DRT-P, BIOS 2.0b 03/30/2017 [ 807.407948] Call Trace: [ 807.410763] dump_stack+0x92/0xeb [ 807.414456] print_address_description+0x70/0x360 [ 807.419549] kasan_report+0x14d/0x300 [ 807.423582] ? tc_setup_cb_call+0x14e/0x250 [ 807.428150] tc_setup_cb_call+0x14e/0x250 [ 807.432539] ? nla_put+0x65/0xe0 [ 807.436146] fl_dump+0x394/0x3f0 [cls_flower] [ 807.440890] ? fl_tmplt_dump+0x140/0x140 [cls_flower] [ 807.446327] ? lock_downgrade+0x320/0x320 [ 807.450702] ? lock_acquire+0xe2/0x220 [ 807.454819] ? is_bpf_text_address+0x5/0x140 [ 807.459475] ? memcpy+0x34/0x50 [ 807.462980] ? nla_put+0x65/0xe0 [ 807.466582] tcf_fill_node+0x341/0x430 [ 807.470717] ? tcf_block_put+0xe0/0xe0 [ 807.474859] tcf_node_dump+0xdb/0xf0 [ 807.478821] fl_walk+0x8e/0x170 [cls_flower] [ 807.483474] tcf_chain_dump+0x35a/0x4d0 [ 807.487703] ? tfilter_notify+0x170/0x170 [ 807.492091] ? tcf_fill_node+0x430/0x430 [ 807.496411] tc_dump_tfilter+0x362/0x3f0 [ 807.500712] ? tc_del_tfilter+0x850/0x850 [ 807.505104] ? kasan_unpoison_shadow+0x30/0x40 [ 807.509940] ? __mutex_unlock_slowpath+0xcf/0x410 [ 807.515031] netlink_dump+0x263/0x4f0 [ 807.519077] __netlink_dump_start+0x2a0/0x300 [ 807.523817] ? tc_del_tfilter+0x850/0x850 [ 807.528198] rtnetlink_rcv_msg+0x46a/0x6d0 [ 807.532671] ? rtnl_fdb_del+0x3f0/0x3f0 [ 807.536878] ? tc_del_tfilter+0x850/0x850 [ 807.541280] netlink_rcv_skb+0x18d/0x200 [ 807.545570] ? rtnl_fdb_del+0x3f0/0x3f0 [ 807.549773] ? netlink_ack+0x500/0x500 [ 807.553913] netlink_unicast+0x2d0/0x370 [ 807.558212] ? netlink_attachskb+0x340/0x340 [ 807.562855] ? _copy_from_iter_full+0xe9/0x3e0 [ 807.567677] ? import_iovec+0x11e/0x1c0 [ 807.571890] netlink_sendmsg+0x3b9/0x6a0 [ 807.576192] ? netlink_unicast+0x370/0x370 [ 807.580684] ? netlink_unicast+0x370/0x370 [ 807.585154] sock_sendmsg+0x6b/0x80 [ 807.589015] ___sys_sendmsg+0x4a1/0x520 [ 807.593230] ? copy_msghdr_from_user+0x210/0x210 [ 807.598232] ? do_wp_page+0x174/0x880 [ 807.602276] ? __handle_mm_fault+0x749/0x1c10 [ 807.607021] ? __handle_mm_fault+0x1046/0x1c10 [ 807.611849] ? __pmd_alloc+0x320/0x320 [ 807.615973] ? check_chain_key+0x140/0x1f0 [ 807.620450] ? check_chain_key+0x140/0x1f0 [ 807.624929] ? __fget_light+0xbc/0xd0 [ 807.628970] ? __sys_sendmsg+0xd7/0x150 [ 807.633172] __sys_sendmsg+0xd7/0x150 [ 807.637201] ? __ia32_sys_shutdown+0x30/0x30 [ 807.641846] ? up_read+0x53/0x90 [ 807.645442] ? __do_page_fault+0x484/0x780 [ 807.649949] ? do_syscall_64+0x1e/0x2c0 [ 807.654164] do_syscall_64+0x72/0x2c0 [ 807.658198] entry_SYSCALL_64_after_hwframe+0x49/0xbe [ 807.663625] RIP: 0033:0x7f42e9870150 [ 807.667568] Code: 8b 15 3c 7d 2b 00 f7 d8 64 89 02 48 c7 c0 ff ff ff ff eb cd 66 0f 1f 44 00 00 83 3d b9 d5 2b 00 00 75 10 b8 2e 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 31 c3 48 83 ec 08 e8 be cd 00 00 48 89 04 24 [ 807.687328] RSP: 002b:00007ffdbf595b58 EFLAGS: 00000246 ORIG_RAX: 000000000000002e [ 807.695564] RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007f42e9870150 [ 807.703083] RDX: 0000000000000000 RSI: 00007ffdbf595b80 RDI: 0000000000000003 [ 807.710605] RBP: 00007ffdbf599d90 R08: 0000000000679bc0 R09: 000000000000000f [ 807.718127] R10: 00000000000005e7 R11: 0000000000000246 R12: 00007ffdbf599d88 [ 807.725651] R13: 0000000000000000 R14: 0000000000000000 R15: 0000000000000000 [ 807.735048] Allocated by task 2687: [ 807.738902] kasan_kmalloc+0xa0/0xd0 [ 807.742852] __kmalloc+0x118/0x2d0 [ 807.746615] tcf_idr_create+0x44/0x320 [ 807.750738] tcf_nat_init+0x41e/0x530 [act_nat] [ 807.755638] tcf_action_init_1+0x4e0/0x650 [ 807.760104] tcf_action_init+0x1ce/0x2d0 [ 807.764395] tcf_exts_validate+0x1d8/0x200 [ 807.768861] fl_change+0x55a/0x26b4 [cls_flower] [ 807.773845] tc_new_tfilter+0x748/0xa20 [ 807.778051] rtnetlink_rcv_msg+0x56a/0x6d0 [ 807.782517] netlink_rcv_skb+0x18d/0x200 [ 807.786804] netlink_unicast+0x2d0/0x370 [ 807.791095] netlink_sendmsg+0x3b9/0x6a0 [ 807.795387] sock_sendmsg+0x6b/0x80 [ 807.799240] ___sys_sendmsg+0x4a1/0x520 [ 807.803445] __sys_sendmsg+0xd7/0x150 [ 807.807473] do_syscall_64+0x72/0x2c0 [ 807.811506] entry_SYSCALL_64_after_hwframe+0x49/0xbe [ 807.818776] Freed by task 2728: [ 807.822283] __kasan_slab_free+0x122/0x180 [ 807.826752] kfree+0xf4/0x2f0 [ 807.830080] __tcf_action_put+0x5a/0xb0 [ 807.834281] tcf_action_put_many+0x46/0x70 [ 807.838747] tca_action_gd+0x232/0xc40 [ 807.842862] tc_ctl_action+0x215/0x230 [ 807.846977] rtnetlink_rcv_msg+0x56a/0x6d0 [ 807.851444] netlink_rcv_skb+0x18d/0x200 [ 807.855731] netlink_unicast+0x2d0/0x370 [ 807.860021] netlink_sendmsg+0x3b9/0x6a0 [ 807.864312] sock_sendmsg+0x6b/0x80 [ 807.868166] ___sys_sendmsg+0x4a1/0x520 [ 807.872372] __sys_sendmsg+0xd7/0x150 [ 807.876401] do_syscall_64+0x72/0x2c0 [ 807.880431] entry_SYSCALL_64_after_hwframe+0x49/0xbe [ 807.887704] The buggy address belongs to the object at ffff88033e636000 which belongs to the cache kmalloc-256 of size 256 [ 807.900909] The buggy address is located 0 bytes inside of 256-byte region [ffff88033e636000, ffff88033e636100) [ 807.913155] The buggy address belongs to the page: [ 807.918322] page:ffffea000cf98d80 count:1 mapcount:0 mapping:ffff88036f80ee00 index:0x0 compound_mapcount: 0 [ 807.928831] flags: 0x5fff8000008100(slab|head) [ 807.933647] raw: 005fff8000008100 ffffea000db44f00 0000000400000004 ffff88036f80ee00 [ 807.942050] raw: 0000000000000000 0000000080190019 00000001ffffffff 0000000000000000 [ 807.950456] page dumped because: kasan: bad access detected [ 807.958240] Memory state around the buggy address: [ 807.963405] ffff88033e635f00: fc fc fc fc fb fb fb fb fb fb fb fc fc fc fc fb [ 807.971288] ffff88033e635f80: fb fb fb fb fb fb fc fc fc fc fc fc fc fc fc fc [ 807.979166] >ffff88033e636000: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb [ 807.994882] ^ [ 807.998477] ffff88033e636080: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb [ 808.006352] ffff88033e636100: fc fc fc fc fc fc fc fc fb fb fb fb fb fb fb fb [ 808.014230] ================================================================== [ 808.022108] Disabling lock debugging due to kernel taint Fixes: edfaf94fa705 ("net_sched: improve and refactor tcf_action_put_many()") Signed-off-by: Vlad Buslov <vladbu@mellanox.com> Acked-by: Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-03vhost: fix VHOST_GET_BACKEND_FEATURES ioctl request definitionGleb Fotengauer-Malinovskiy1-1/+1
The _IOC_READ flag fits this ioctl request more because this request actually only writes to, but doesn't read from userspace. See NOTEs in include/uapi/asm-generic/ioctl.h for more information. Fixes: 429711aec282 ("vhost: switch to use new message format") Signed-off-by: Gleb Fotengauer-Malinovskiy <glebfm@altlinux.org> Acked-by: Jason Wang <jasowang@redhat.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-03r8169: add support for NCube 8168 network cardAnthony Wong2-0/+3
This card identifies itself as: Ethernet controller [0200]: NCube Device [10ff:8168] (rev 06) Subsystem: TP-LINK Technologies Co., Ltd. Device [7470:3468] Adding a new entry to rtl8169_pci_tbl makes the card work. Link: http://launchpad.net/bugs/1788730 Signed-off-by: Anthony Wong <anthony.wong@ubuntu.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-03ip6_tunnel: respect ttl inherit for ip6tnlHangbin Liu1-1/+9
man ip-tunnel ttl section says: 0 is a special value meaning that packets inherit the TTL value. IPv4 tunnel respect this in ip_tunnel_xmit(), but IPv6 tunnel has not implement it yet. To make IPv6 behave consistently with IP tunnel, add ipv6 tunnel inherit support. Signed-off-by: Hangbin Liu <liuhangbin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-03mac80211: shorten the IBSS debug messagesEmmanuel Grumbach1-11/+11
When tracing is enabled, all the debug messages are recorded and must not exceed MAX_MSG_LEN (100) columns. Longer debug messages grant the user with: WARNING: CPU: 3 PID: 32642 at /tmp/wifi-core-20180806094828/src/iwlwifi-stack-dev/net/mac80211/./trace_msg.h:32 trace_event_raw_event_mac80211_msg_event+0xab/0xc0 [mac80211] Workqueue: phy1 ieee80211_iface_work [mac80211] RIP: 0010:trace_event_raw_event_mac80211_msg_event+0xab/0xc0 [mac80211] Call Trace: __sdata_dbg+0xbd/0x120 [mac80211] ieee80211_ibss_rx_queued_mgmt+0x15f/0x510 [mac80211] ieee80211_iface_work+0x21d/0x320 [mac80211] Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2018-09-03mac80211: don't Tx a deauth frame if the AP forbade TxEmmanuel Grumbach1-2/+15
If the driver fails to properly prepare for the channel switch, mac80211 will disconnect. If the CSA IE had mode set to 1, it means that the clients are not allowed to send any Tx on the current channel, and that includes the deauthentication frame. Make sure that we don't send the deauthentication frame in this case. In iwlwifi, this caused a failure to flush queues since the firmware already closed the queues after having parsed the CSA IE. Then mac80211 would wait until the deauthentication frame would go out (drv_flush(drop=false)) and that would never happen. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2018-09-03mac80211: Fix station bandwidth setting after channel switchIlan Peer1-0/+53
When performing a channel switch flow for a managed interface, the flow did not update the bandwidth of the AP station and the rate scale algorithm. In case of a channel width downgrade, this would result with the rate scale algorithm using a bandwidth that does not match the interface channel configuration. Fix this by updating the AP station bandwidth and rate scaling algorithm before the actual channel change in case of a bandwidth downgrade, or after the actual channel change in case of a bandwidth upgrade. Signed-off-by: Ilan Peer <ilan.peer@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2018-09-03mac80211: fix a race between restart and CSA flowsEmmanuel Grumbach1-1/+20
We hit a problem with iwlwifi that was caused by a bug in mac80211. A bug in iwlwifi caused the firwmare to crash in certain cases in channel switch. Because of that bug, drv_pre_channel_switch would fail and trigger the restart flow. Now we had the hw restart worker which runs on the system's workqueue and the csa_connection_drop_work worker that runs on mac80211's workqueue that can run together. This is obviously problematic since the restart work wants to reconfigure the connection, while the csa_connection_drop_work worker does the exact opposite: it tries to disconnect. Fix this by cancelling the csa_connection_drop_work worker in the restart worker. Note that this can sound racy: we could have: driver iface_work CSA_work restart_work +++++++++++++++++++++++++++++++++++++++++++++ | <--drv_cs ---| <FW CRASH!> -CS FAILED--> | | | cancel_work(CSA) schedule | CSA work | | | Race between those 2 But this is not possible because we flush the workqueue in the restart worker before we cancel the CSA worker. That would be bullet proof if we could guarantee that we schedule the CSA worker only from the iface_work which runs on the workqueue (and not on the system's workqueue), but unfortunately we do have an instance in which we schedule the CSA work outside the context of the workqueue (ieee80211_chswitch_done). Note also that we should probably cancel other workers like beacon_connection_loss_work and possibly others for different types of interfaces, at the very least, IBSS should suffer from the exact same problem, but for now, do the minimum to fix the actual bug that was actually experienced and reproduced. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2018-09-03mac80211: fix WMM TXOP calculationDreyfuss, Haim1-2/+1
In commit 9236c4523e5b ("mac80211: limit wmm params to comply with ETSI requirements"), we have limited the WMM parameters to comply with 802.11 and ETSI standard. Mistakenly the TXOP value was caluclated wrong. Fix it by taking the minimum between 802.11 to ETSI to make sure we are not violating both. Fixes: e552af058148 ("mac80211: limit wmm params to comply with ETSI requirements") Signed-off-by: Haim Dreyfuss <haim.dreyfuss@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2018-09-03cfg80211: fix a type issue in ieee80211_chandef_to_operating_class()Dan Carpenter1-1/+1
The "chandef->center_freq1" variable is a u32 but "freq" is a u16 so we are truncating away the high bits. I noticed this bug because in commit 9cf0a0b4b64a ("cfg80211: Add support for 60GHz band channels 5 and 6") we made "freq <= 56160 + 2160 * 6" a valid requency when before it was only "freq <= 56160 + 2160 * 4" that was valid. It introduces a static checker warning: net/wireless/util.c:1571 ieee80211_chandef_to_operating_class() warn: always true condition '(freq <= 56160 + 2160 * 6) => (0-u16max <= 69120)' But really we probably shouldn't have been truncating the high bits away to begin with. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2018-09-03mac80211: fix an off-by-one issue in A-MSDU max_subframe computationLorenzo Bianconi1-1/+1
Initialize 'n' to 2 in order to take into account also the first packet in the estimation of max_subframe limit for a given A-MSDU since frag_tail pointer is NULL when ieee80211_amsdu_aggregate routine analyzes the second frame. Fixes: 6e0456b54545 ("mac80211: add A-MSDU tx support") Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2018-09-02uapi: Fix linux/rds.h userspace compilation errors.Vinson Lee1-0/+1
Include linux/in6.h for struct in6_addr. /usr/include/linux/rds.h:156:18: error: field ‘laddr’ has incomplete type struct in6_addr laddr; ^~~~~ /usr/include/linux/rds.h:157:18: error: field ‘faddr’ has incomplete type struct in6_addr faddr; ^~~~~ /usr/include/linux/rds.h:178:18: error: field ‘laddr’ has incomplete type struct in6_addr laddr; ^~~~~ /usr/include/linux/rds.h:179:18: error: field ‘faddr’ has incomplete type struct in6_addr faddr; ^~~~~ /usr/include/linux/rds.h:198:18: error: field ‘bound_addr’ has incomplete type struct in6_addr bound_addr; ^~~~~~~~~~ /usr/include/linux/rds.h:199:18: error: field ‘connected_addr’ has incomplete type struct in6_addr connected_addr; ^~~~~~~~~~~~~~ /usr/include/linux/rds.h:219:18: error: field ‘local_addr’ has incomplete type struct in6_addr local_addr; ^~~~~~~~~~ /usr/include/linux/rds.h:221:18: error: field ‘peer_addr’ has incomplete type struct in6_addr peer_addr; ^~~~~~~~~ /usr/include/linux/rds.h:245:18: error: field ‘src_addr’ has incomplete type struct in6_addr src_addr; ^~~~~~~~ /usr/include/linux/rds.h:246:18: error: field ‘dst_addr’ has incomplete type struct in6_addr dst_addr; ^~~~~~~~ Fixes: b7ff8b1036f0 ("rds: Extend RDS API for IPv6 support") Signed-off-by: Vinson Lee <vlee@freedesktop.org> Acked-by: Santosh Shilimkar <santosh.shilimkar@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-02net: cadence: Fix a sleep-in-atomic-context bug in macb_halt_tx()Jia-Ju Bai1-1/+1
The kernel module may sleep with holding a spinlock. The function call paths (from bottom to top) in Linux-4.16 are: [FUNC] usleep_range drivers/net/ethernet/cadence/macb_main.c, 648: usleep_range in macb_halt_tx drivers/net/ethernet/cadence/macb_main.c, 730: macb_halt_tx in macb_tx_error_task drivers/net/ethernet/cadence/macb_main.c, 721: _raw_spin_lock_irqsave in macb_tx_error_task To fix this bug, usleep_range() is replaced with udelay(). This bug is found by my static analysis tool DSAC. Signed-off-by: Jia-Ju Bai <baijiaju1990@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-02Linux 4.19-rc2Linus Torvalds1-1/+1
2018-09-02net/ipv6: Only update MTU metric if it setDavid Ahern1-1/+4
Jan reported a regression after an update to 4.18.5. In this case ipv6 default route is setup by systemd-networkd based on data from an RA. The RA contains an MTU of 1492 which is used when the route is first inserted but then systemd-networkd pushes down updates to the default route without the mtu set. Prior to the change to fib6_info, metrics such as MTU were held in the dst_entry and rt6i_pmtu in rt6_info contained an update to the mtu if any. ip6_mtu would look at rt6i_pmtu first and use it if set. If not, the value from the metrics is used if it is set and finally falling back to the idev value. After the fib6_info change metrics are contained in the fib6_info struct and there is no equivalent to rt6i_pmtu. To maintain consistency with the old behavior the new code should only reset the MTU in the metrics if the route update has it set. Fixes: d4ead6b34b67 ("net/ipv6: move metrics from dst to rt6_info") Reported-by: Jan Janssen <medhefgo@web.de> Signed-off-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-02net: ethernet: cpsw-phy-sel: prefer phandle for phy selTony Lindgren1-3/+6
The cpsw-phy-sel device is not a child of the cpsw interconnect target module. It lives in the system control module. Let's fix this issue by trying to use cpsw-phy-sel phandle first if it exists and if not fall back to current usage of trying to find the cpsw-phy-sel child. That way the phy sel driver can be a child of the system control module where it belongs in the device tree. Without this fix, we cannot have a proper interconnect target module hierarchy in device tree for things like genpd. Note that deferred probe is mostly not supported by cpsw and this patch does not attempt to fix that. In case deferred probe support is needed, this could be added to cpsw_slave_open() and phy_connect() so they start handling and returning errors. For documenting it, looks like the cpsw-phy-sel is used for all cpsw device tree nodes. It's missing the related binding documentation, so let's also update the binding documentation accordingly. Cc: devicetree@vger.kernel.org Cc: Andrew Lunn <andrew@lunn.ch> Cc: Grygorii Strashko <grygorii.strashko@ti.com> Cc: Ivan Khoronzhuk <ivan.khoronzhuk@linaro.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Murali Karicheri <m-karicheri2@ti.com> Cc: Rob Herring <robh+dt@kernel.org> Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-02dt-bindings: net: cpsw: Document cpsw-phy-sel usage but prefer phandleTony Lindgren1-0/+6
The current cpsw usage for cpsw-phy-sel is undocumented but is used for all the boards using cpsw. And cpsw-phy-sel is not really a child of the cpsw device, it lives in the system control module instead. Let's document the existing usage, and improve it a bit where we prefer to use a phandle instead of a child device for it. That way we can properly describe the hardware in dts files for things like genpd. Cc: devicetree@vger.kernel.org Cc: Andrew Lunn <andrew@lunn.ch> Cc: Grygorii Strashko <grygorii.strashko@ti.com> Cc: Ivan Khoronzhuk <ivan.khoronzhuk@linaro.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Murali Karicheri <m-karicheri2@ti.com> Cc: Rob Herring <robh+dt@kernel.org> Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-02igmp: fix incorrect unsolicit report count after link down and upHangbin Liu1-4/+2
After link down and up, i.e. when call ip_mc_up(), we doesn't init im->unsolicit_count. So after igmp_timer_expire(), we will not start timer again and only send one unsolicit report at last. Fix it by initializing im->unsolicit_count in igmp_group_added(), so we can respect igmp robustness value. Fixes: 24803f38a5c0b ("igmp: do not remove igmp souce list info when set link down") Signed-off-by: Hangbin Liu <liuhangbin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-02igmp: fix incorrect unsolicit report count when join groupHangbin Liu1-3/+2
We should not start timer if im->unsolicit_count equal to 0 after decrease. Or we will send one more unsolicit report message. i.e. 3 instead of 2 by default. Fixes: 1da177e4c3f41 ("Linux-2.6.12-rc2") Signed-off-by: Hangbin Liu <liuhangbin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-02bpf: avoid misuse of psock when TCP_ULP_BPF collides with another ULPJohn Fastabend1-1/+11
Currently we check sk_user_data is non NULL to determine if the sk exists in a map. However, this is not sufficient to ensure the psock or the ULP ops are not in use by another user, such as kcm or TLS. To avoid this when adding a sock to a map also verify it is of the correct ULP type. Additionally, when releasing a psock verify that it is the TCP_ULP_BPF type before releasing the ULP. The error case where we abort an update due to ULP collision can cause this error path. For example, __sock_map_ctx_update_elem() [...] err = tcp_set_ulp_id(sock, TCP_ULP_BPF) <- collides with TLS if (err) <- so err out here goto out_free [...] out_free: smap_release_sock() <- calling tcp_cleanup_ulp releases the TLS ULP incorrectly. Fixes: 2f857d04601a ("bpf: sockmap, remove STRPARSER map_flags and add multi-map support") Signed-off-by: John Fastabend <john.fastabend@gmail.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2018-09-02tools/bpf: bpftool, add xskmap in map typesPrashant Bhole1-0/+1
When listed all maps, bpftool currently shows (null) for xskmap. Added xskmap type in map_type_name[] to show correct type. Signed-off-by: Prashant Bhole <bhole_prashant_q7@lab.ntt.co.jp> Acked-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2018-09-02bpf: Fix bpf_msg_pull_data()Tushar Dave1-4/+3
Helper bpf_msg_pull_data() mistakenly reuses variable 'offset' while linearizing multiple scatterlist elements. Variable 'offset' is used to find first starting scatterlist element i.e. msg->data = sg_virt(&sg[first_sg]) + start - offset" Use different variable name while linearizing multiple scatterlist elements so that value contained in variable 'offset' won't get overwritten. Fixes: 015632bb30da ("bpf: sk_msg program helper bpf_sk_msg_pull_data") Signed-off-by: Tushar Dave <tushar.n.dave@oracle.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2018-09-02x86/pti: Fix section mismatch warning/errorRandy Dunlap1-1/+1
Fix the section mismatch warning in arch/x86/mm/pti.c: WARNING: vmlinux.o(.text+0x6972a): Section mismatch in reference from the function pti_clone_pgtable() to the function .init.text:pti_user_pagetable_walk_pte() The function pti_clone_pgtable() references the function __init pti_user_pagetable_walk_pte(). This is often because pti_clone_pgtable lacks a __init annotation or the annotation of pti_user_pagetable_walk_pte is wrong. FATAL: modpost: Section mismatches detected. Fixes: 85900ea51577 ("x86/pti: Map the vsyscall page if needed") Reported-by: kbuild test robot <lkp@intel.com> Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Andy Lutomirski <luto@kernel.org> Link: https://lkml.kernel.org/r/43a6d6a3-d69d-5eda-da09-0b1c88215a2a@infradead.org
2018-09-02of/platform: initialise AMBA default DMA masksLinus Walleij1-0/+4
This addresses a v4.19-rc1 regression in the PL111 DRM driver in drivers/gpu/pl111/* The driver uses the CMA KMS helpers and will thus at some point call down to dma_alloc_attrs() to allocate a chunk of contigous DMA memory for the framebuffer. It appears that in v4.18, it was OK that this (and other DMA mastering AMBA devices) left dev->coherent_dma_mask blank (zero). In v4.19-rc1 the WARN_ON_ONCE(dev && !dev->coherent_dma_mask) in dma_alloc_attrs() in include/linux/dma-mapping.h is triggered. The allocation later fails when get_coherent_dma_mask() is called from __dma_alloc() and __dma_alloc() returns NULL: drm-clcd-pl111 dev:20: coherent DMA mask is unset drm-clcd-pl111 dev:20: [drm:drm_fb_helper_fbdev_setup] *ERROR* Failed to set fbdev configuration It turns out that in commit 4d8bde883bfb ("OF: Don't set default coherent DMA mask") the OF core stops setting the default DMA mask on new devices, especially those lines of the patch: - if (!dev->coherent_dma_mask) - dev->coherent_dma_mask = DMA_BIT_MASK(32); Robin Murphy solved a similar problem in a5516219b102 ("of/platform: Initialise default DMA masks") by simply assigning dev.coherent_dma_mask and the dev.dma_mask to point to the same when creating devices from the device tree, and introducing the same code into the code path creating AMBA/PrimeCell devices solved my problem, graphics now come up. The code simply assumes that the device can access all of the system memory by setting the coherent DMA mask to 0xffffffff when creating a device from the device tree, which is crude, but seems to be what kernel v4.18 assumed. The AMBA PrimeCells do not differ between coherent and streaming DMA so we can just assign the same to any DMA mask. Possibly drivers should augment their coherent DMA mask in accordance with "dma-ranges" from the device tree if more finegranular masking is needed. Reported-by: Russell King <linux@armlinux.org.uk> Fixes: 4d8bde883bfb ("OF: Don't set default coherent DMA mask") Cc: Russell King <linux@armlinux.org.uk> Cc: Robin Murphy <robin.murphy@arm.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Christoph Hellwig <hch@lst.de>
2018-09-02sparc: set a default 32-bit dma mask for OF devicesChristoph Hellwig2-0/+7
This keeps the historic default behavior for devices without a DMA mask, but removes the warning about a lacking DMA mask for doing DMA without a mask. Reported-by: Meelis Roos <mroos@linux.ee> Signed-off-by: Christoph Hellwig <hch@lst.de> Tested-by: Guenter Roeck <linux@roeck-us.net>
2018-09-01ipv6: don't get lwtstate twice in ip6_rt_copy_init()Alexey Kodanev1-1/+0
Commit 80f1a0f4e0cd ("net/ipv6: Put lwtstate when destroying fib6_info") partially fixed the kmemleak [1], lwtstate can be copied from fib6_info, with ip6_rt_copy_init(), and it should be done only once there. rt->dst.lwtstate is set by ip6_rt_init_dst(), at the start of the function ip6_rt_copy_init(), so there is no need to get it again at the end. With this patch, lwtstate also isn't copied from RTF_REJECT routes. [1]: unreferenced object 0xffff880b6aaa14e0 (size 64): comm "ip", pid 10577, jiffies 4295149341 (age 1273.903s) hex dump (first 32 bytes): 01 00 04 00 04 00 00 00 10 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ backtrace: [<0000000018664623>] lwtunnel_build_state+0x1bc/0x420 [<00000000b73aa29a>] ip6_route_info_create+0x9f7/0x1fd0 [<00000000ee2c5d1f>] ip6_route_add+0x14/0x70 [<000000008537b55c>] inet6_rtm_newroute+0xd9/0xe0 [<000000002acc50f5>] rtnetlink_rcv_msg+0x66f/0x8e0 [<000000008d9cd381>] netlink_rcv_skb+0x268/0x3b0 [<000000004c893c76>] netlink_unicast+0x417/0x5a0 [<00000000f2ab1afb>] netlink_sendmsg+0x70b/0xc30 [<00000000890ff0aa>] sock_sendmsg+0xb1/0xf0 [<00000000a2e7b66f>] ___sys_sendmsg+0x659/0x950 [<000000001e7426c8>] __sys_sendmsg+0xde/0x170 [<00000000fe411443>] do_syscall_64+0x9f/0x4a0 [<000000001be7b28b>] entry_SYSCALL_64_after_hwframe+0x49/0xbe [<000000006d21f353>] 0xffffffffffffffff Fixes: 6edb3c96a5f0 ("net/ipv6: Defer initialization of dst to data path") Signed-off-by: Alexey Kodanev <alexey.kodanev@oracle.com> Reviewed-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-01x86/vdso: Fix lsl operand orderSamuel Neves1-1/+1
In the __getcpu function, lsl is using the wrong target and destination registers. Luckily, the compiler tends to choose %eax for both variables, so it has been working so far. Fixes: a582c540ac1b ("x86/vdso: Use RDPID in preference to LSL when available") Signed-off-by: Samuel Neves <sneves@dei.uc.pt> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Andy Lutomirski <luto@kernel.org> Cc: stable@vger.kernel.org Link: https://lkml.kernel.org/r/20180901201452.27828-1-sneves@dei.uc.pt
2018-09-01kernel/dma/direct: take DMA offset into account in dma_direct_supportedChristoph Hellwig1-2/+2
When a device has a DMA offset the dma capable result will change due to the difference between the physical and DMA address. Take that into account. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Reviewed-by: Robin Murphy <robin.murphy@arm.com>
2018-09-01x86/mce: Fix set_mce_nospec() to avoid #GP faultLuckTony1-1/+24
The trick with flipping bit 63 to avoid loading the address of the 1:1 mapping of the poisoned page while the 1:1 map is updated used to work when unmapping the page. But it falls down horribly when attempting to directly set the page as uncacheable. The problem is that when the cache mode is changed to uncachable, the pages needs to be flushed from the cache first. But the decoy address is non-canonical due to bit 63 flipped, and the CLFLUSH instruction throws a #GP fault. Add code to change_page_attr_set_clr() to fix the address before calling flush. Fixes: 284ce4011ba6 ("x86/memory_failure: Introduce {set, clear}_mce_nospec()") Suggested-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Tony Luck <tony.luck@intel.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Anvin <hpa@zytor.com> Cc: Borislav Petkov <bp@alien8.de> Cc: linux-edac <linux-edac@vger.kernel.org> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Dave Jiang <dave.jiang@intel.com> Link: https://lkml.kernel.org/r/20180831165506.GA9605@agluck-desk
2018-08-31ibmvnic: Include missing return code checks in reset functionThomas Falcon1-3/+9
Check the return codes of these functions and halt reset in case of failure. The driver will remain in a dormant state until the next reset event, when device initialization will be re-attempted. Signed-off-by: Thomas Falcon <tlfalcon@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-08-31selftests: pmtu: detect correct binary to ping ipv6 addressesSabrina Dubroca1-1/+4
Some systems don't have the ping6 binary anymore, and use ping for everything. Detect the absence of ping6 and try to use ping instead. Fixes: d1f1b9cbf34c ("selftests: net: Introduce first PMTU test") Signed-off-by: Sabrina Dubroca <sd@queasysnail.net> Acked-by: Stefano Brivio <sbrivio@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-08-31selftests: pmtu: maximum MTU for vti4 is 2^16-1-20Sabrina Dubroca1-1/+1
Since commit 82612de1c98e ("ip_tunnel: restore binding to ifaces with a large mtu"), the maximum MTU for vti4 is based on IP_MAX_MTU instead of the mysterious constant 0xFFF8. This makes this selftest fail. Fixes: 82612de1c98e ("ip_tunnel: restore binding to ifaces with a large mtu") Signed-off-by: Sabrina Dubroca <sd@queasysnail.net> Acked-by: Stefano Brivio <sbrivio@redhat.com> Acked-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-08-31tcp: do not restart timewait timer on rst receptionFlorian Westphal1-1/+2
RFC 1337 says: ''Ignore RST segments in TIME-WAIT state. If the 2 minute MSL is enforced, this fix avoids all three hazards.'' So with net.ipv4.tcp_rfc1337=1, expected behaviour is to have TIME-WAIT sk expire rather than removing it instantly when a reset is received. However, Linux will also re-start the TIME-WAIT timer. This causes connect to fail when tying to re-use ports or very long delays (until syn retry interval exceeds MSL). packetdrill test case: // Demonstrate bogus rearming of TIME-WAIT timer in rfc1337 mode. `sysctl net.ipv4.tcp_rfc1337=1` 0.000 socket(..., SOCK_STREAM, IPPROTO_TCP) = 3 0.000 setsockopt(3, SOL_SOCKET, SO_REUSEADDR, [1], 4) = 0 0.000 bind(3, ..., ...) = 0 0.000 listen(3, 1) = 0 0.100 < S 0:0(0) win 29200 <mss 1460,nop,nop,sackOK,nop,wscale 7> 0.100 > S. 0:0(0) ack 1 <mss 1460,nop,nop,sackOK,nop,wscale 7> 0.200 < . 1:1(0) ack 1 win 257 0.200 accept(3, ..., ...) = 4 // Receive first segment 0.310 < P. 1:1001(1000) ack 1 win 46 // Send one ACK 0.310 > . 1:1(0) ack 1001 // read 1000 byte 0.310 read(4, ..., 1000) = 1000 // Application writes 100 bytes 0.350 write(4, ..., 100) = 100 0.350 > P. 1:101(100) ack 1001 // ACK 0.500 < . 1001:1001(0) ack 101 win 257 // close the connection 0.600 close(4) = 0 0.600 > F. 101:101(0) ack 1001 win 244 // Our side is in FIN_WAIT_1 & waits for ack to fin 0.7 < . 1001:1001(0) ack 102 win 244 // Our side is in FIN_WAIT_2 with no outstanding data. 0.8 < F. 1001:1001(0) ack 102 win 244 0.8 > . 102:102(0) ack 1002 win 244 // Our side is now in TIME_WAIT state, send ack for fin. 0.9 < F. 1002:1002(0) ack 102 win 244 0.9 > . 102:102(0) ack 1002 win 244 // Peer reopens with in-window SYN: 1.000 < S 1000:1000(0) win 9200 <mss 1460,nop,nop,sackOK,nop,wscale 7> // Therefore, reply with ACK. 1.000 > . 102:102(0) ack 1002 win 244 // Peer sends RST for this ACK. Normally this RST results // in tw socket removal, but rfc1337=1 setting prevents this. 1.100 < R 1002:1002(0) win 244 // second syn. Due to rfc1337=1 expect another pure ACK. 31.0 < S 1000:1000(0) win 9200 <mss 1460,nop,nop,sackOK,nop,wscale 7> 31.0 > . 102:102(0) ack 1002 win 244 // .. and another RST from peer. 31.1 < R 1002:1002(0) win 244 31.2 `echo no timer restart;ss -m -e -a -i -n -t -o state TIME-WAIT` // third syn after one minute. Time-Wait socket should have expired by now. 63.0 < S 1000:1000(0) win 9200 <mss 1460,nop,nop,sackOK,nop,wscale 7> // so we expect a syn-ack & 3whs to proceed from here on. 63.0 > S. 0:0(0) ack 1 <mss 1460,nop,nop,sackOK,nop,wscale 7> Without this patch, 'ss' shows restarts of tw timer and last packet is thus just another pure ack, more than one minute later. This restores the original code from commit 283fd6cf0be690a83 ("Merge in ANK networking jumbo patch") in netdev-vger-cvs.git . For some reason the else branch was removed/lost in 1f28b683339f7 ("Merge in TCP/UDP optimizations and [..]") and timer restart became unconditional. Reported-by: Michal Tesar <mtesar@redhat.com> Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-08-31net/rds: RDS is not Radio Data SystemPavel Machek1-1/+1
Getting prompt "The RDS Protocol" (RDS) is not too helpful, and it is easily confused with Radio Data System (which we may want to support in kernel, too). Signed-off-by: Pavel Machek <pavel@ucw.cz> Acked-by: Sowmini Varadhan <sowmini.varadhan@oracle.com> Acked-by: Santosh Shilimkar <santosh.shilimkar@oracle.com> Acked-by: Sowmini Varadhan <sowmini.varadhan@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-08-31hv_netvsc: Fix a deadlock by getting rtnl lock earlier in netvsc_probe()Dexuan Cui1-1/+10
This patch fixes the race between netvsc_probe() and rndis_set_subchannel(), which can cause a deadlock. These are the related 3 paths which show the deadlock: path #1: Workqueue: hv_vmbus_con vmbus_onmessage_work [hv_vmbus] Call Trace: schedule schedule_preempt_disabled __mutex_lock __device_attach bus_probe_device device_add vmbus_device_register vmbus_onoffer vmbus_onmessage_work process_one_work worker_thread kthread ret_from_fork path #2: schedule schedule_preempt_disabled __mutex_lock netvsc_probe vmbus_probe really_probe __driver_attach bus_for_each_dev driver_attach_async async_run_entry_fn process_one_work worker_thread kthread ret_from_fork path #3: Workqueue: events netvsc_subchan_work [hv_netvsc] Call Trace: schedule rndis_set_subchannel netvsc_subchan_work process_one_work worker_thread kthread ret_from_fork Before path #1 finishes, path #2 can start to run, because just before the "bus_probe_device(dev);" in device_add() in path #1, there is a line "object_uevent(&dev->kobj, KOBJ_ADD);", so systemd-udevd can immediately try to load hv_netvsc and hence path #2 can start to run. Next, path #2 offloads the subchannal's initialization to a workqueue, i.e. path #3, so we can end up in a deadlock situation like this: Path #2 gets the device lock, and is trying to get the rtnl lock; Path #3 gets the rtnl lock and is waiting for all the subchannel messages to be processed; Path #1 is trying to get the device lock, but since #2 is not releasing the device lock, path #1 has to sleep; since the VMBus messages are processed one by one, this means the sub-channel messages can't be procedded, so #3 has to sleep with the rtnl lock held, and finally #2 has to sleep... Now all the 3 paths are sleeping and we hit the deadlock. With the patch, we can make sure #2 gets both the device lock and the rtnl lock together, gets its job done, and releases the locks, so #1 and #3 will not be blocked for ever. Fixes: 8195b1396ec8 ("hv_netvsc: fix deadlock on hotplug") Signed-off-by: Dexuan Cui <decui@microsoft.com> Cc: Stephen Hemminger <sthemmin@microsoft.com> Cc: K. Y. Srinivasan <kys@microsoft.com> Cc: Haiyang Zhang <haiyangz@microsoft.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-08-31nfp: wait for posted reconfigs when disabling the deviceJakub Kicinski1-15/+33
To avoid leaking a running timer we need to wait for the posted reconfigs after netdev is unregistered. In common case the process of deinitializing the device will perform synchronous reconfigs which wait for posted requests, but especially with VXLAN ports being actively added and removed there can be a race condition leaving a timer running after adapter structure is freed leading to a crash. Add an explicit flush after deregistering and for a good measure a warning to check if timer is running just before structures are freed. Fixes: 3d780b926a12 ("nfp: add async reconfiguration mechanism") Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: Dirk van der Merwe <dirk.vandermerwe@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.