aboutsummaryrefslogtreecommitdiffstats
path: root/.gitignore (unfollow)
AgeCommit message (Collapse)AuthorFilesLines
2018-01-24net: sched: prepare for reimplementation of tc_cls_common_offload_init()Jakub Kicinski5-14/+26
Rename the tc_cls_common_offload_init() helper function to tc_cls_common_offload_init_deprecated() and add a new implementation which also takes flags argument. We will only set extack if flags indicate that offload is forced (skip_sw) otherwise driver errors should be ignored, as they don't influence the overall filter installation. Note that we need the tc_skip_hw() helper for new version, therefore it is added later in the file. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: Simon Horman <simon.horman@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-24net: sched: propagate extack to cls->destroy callbacksJakub Kicinski13-19/+24
Propagate extack to cls->destroy callbacks when called from non-error paths. On error paths pass NULL to avoid overwriting the failure message. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: Simon Horman <simon.horman@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-24pktgen: Clean read user supplied flag messDmitry Safonov1-105/+39
Don't use error-prone-brute-force way. Signed-off-by: Dmitry Safonov <dima@arista.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-24pktgen: Remove brute-force printing of flagsDmitry Safonov1-58/+19
Add macro generated pkt_flag_names array, with a little help of which the flags can be printed by using an index. Signed-off-by: Dmitry Safonov <dima@arista.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-24pktgen: Add behaviour flags macro to generate flags/namesDmitry Safonov1-23/+34
PKT_FALGS macro will be used to add package behavior names definitions to simplify the code that prints/reads pkg flags. Sorted the array in order of printing the flags in pktgen_if_show() Note: Renamed IPSEC_ON => IPSEC for simplicity. No visible behavior change expected. Signed-off-by: Dmitry Safonov <dima@arista.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-24pktgen: Add missing !flag parametersDmitry Safonov1-1/+7
o FLOW_SEQ now can be disabled with pgset "flag !FLOW_SEQ" o FLOW_SEQ and FLOW_RND are antonyms, as it's shown by pktgen_if_show() o IPSEC now may be disabled Note, that IPV6 is enabled with dst6/src6 parameters, not with a flag parameter. Signed-off-by: Dmitry Safonov <dima@arista.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-24Documentation/pktgen: Clearify how-to use pktgen samplesDmitry Safonov1-5/+14
o Change process name in ps output: looks like, these days the process is named kpktgend_<cpu>, rather than pktgen/<cpu>. o Use pg_ctrl for start/stop as it can work well with pgset without changes to $(PGDEV) variable. o Clarify a bit needed $(PGDEV) definition for sample scripts and that one needs to `source functions.sh`. o Document how-to unset a behaviour flag, note about history expansion. o Fix pgset spi parameter value. Cc: Jonathan Corbet <corbet@lwn.net> Cc: linux-doc@vger.kernel.org Signed-off-by: Dmitry Safonov <dima@arista.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-24cxgb4: properly initialize variablesRahul Lakkireddy2-2/+4
memset variables to 0 to fix sparse warnings: drivers/net/ethernet/chelsio/cxgb4/cxgb4_cudbg.c:409:42: sparse: Using plain integer as NULL pointer drivers/net/ethernet/chelsio/cxgb4/cudbg_zlib.c:43:47: sparse: Using plain integer as NULL pointer Fixes: ad75b7d32f25 ("cxgb4: implement ethtool dump data operations") Fixes: 91c1953de387 ("cxgb4: use zlib deflate to compress firmware dump") Signed-off-by: Rahul Lakkireddy <rahul.lakkireddy@chelsio.com> Signed-off-by: Ganesh Goudar <ganeshgr@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-24cxgb4: enable ZLIB_DEFLATE when building cxgb4Rahul Lakkireddy3-15/+2
Fixes: drivers/net/ethernet/chelsio/cxgb4/cudbg_zlib.c:39:5: error: redefinition of 'cudbg_compress_buff' int cudbg_compress_buff(struct cudbg_init *pdbg_init, ^~~~~~~~~~~~~~~~~~~ In file included from drivers/net/ethernet/chelsio/cxgb4/cudbg_zlib.c:23:0: drivers/net/ethernet/chelsio/cxgb4/cudbg_zlib.h:45:19: note: previous definition of 'cudbg_compress_buff' was here static inline int cudbg_compress_buff(struct cudbg_init *pdbg_init, ^~~~~~~~~~~~~~~~~~~ Fixes: 91c1953de387 ("cxgb4: use zlib deflate to compress firmware dump") Signed-off-by: Rahul Lakkireddy <rahul.lakkireddy@chelsio.com> Signed-off-by: Ganesh Goudar <ganeshgr@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-24net/smc: continue waiting if peer signals write_shutdownUrsula Braun1-2/+2
If the peer sends a shutdown WRITE, this should not affect sending in general, and waiting for send buffer space in particular. Stop waiting of the local socket for send buffer space only, if peer signals closing, but not if peer signals just shutdown WRITE. Signed-off-by: Ursula Braun <ubraun@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-24net/smc: improve state change handling after close waitUrsula Braun1-14/+26
When a socket is closed or shutdown, smc waits for data being transmitted in certain states. If the state changes during this wait, the close switch depending on state should be reentered. In addition, state change is avoided if sending of close or shutdown fails. Signed-off-by: Ursula Braun <ubraun@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-24net/smc: make wait for work request uninterruptibleUrsula Braun1-7/+6
Work requests are needed for every ib_post_send(), among them the ib_post_send() to signal closing. If an smc socket program is cancelled, the smc connections should be cleaned up, and require sending of closing signals to the peer. This may fail, if a wait for a free work request is needed, but is cancelled immediately due to the cancel interrupt. To guarantee notification of the peer, the wait for a work request is changed to uninterruptible. And the area to receive work request completion info with ib_poll_cq() is cleared first. And _tx_ variable names are used in the _tx_routines for the demultiplexing common type in the header. Signed-off-by: Ursula Braun <ubraun@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-24net/smc: get rid of tx_pend waits in socket closingUrsula Braun5-57/+0
There is no need to wait for confirmation of pending tx requests for a closing connection, since pending tx slots are dismissed when finishing a connection. Signed-off-by: Ursula Braun <ubraun@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-24net/smc: simplify function smc_clcsock_accept()Ursula Braun1-9/+2
Cleanup to avoid duplicate code in smc_clcsock_accept(). No functional change. Signed-off-by: Ursula Braun <ubraun@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-24net/smc: use local struct sock variables consistentlyUrsula Braun2-34/+37
Cleanup to consistently exploit the local struct sock definitions. No functional change. Signed-off-by: Ursula Braun <ubraun@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-24cxgb4/cxgb4vf: add support for ndo_set_vf_vlanGanesh Goudar9-8/+116
implement ndo_set_vf_vlan for mgmt netdevice to configure the PCIe VF. Original work by: Casey Leedom <leedom@chelsio.com> Signed-off-by: Ganesh Goudar <ganeshgr@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-23selftests/bpf: validate replace of TC filters is workingJakub Kicinski1-5/+50
Daniel discovered recently I broke TC filter replace (and fixed it in commit ad9294dbc227 ("bpf: fix cls_bpf on filter replace")). Add a test to make sure it never happens again. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-23selftests/bpf: check bpf verifier log buffer usage works for HW offloadQuentin Monnet2-5/+25
Make netdevsim print a message to the BPF verifier log buffer when a program is offloaded. Then use this message in hardware offload selftests to make sure that using this buffer actually prints the message to the console for eBPF hardware offload. The message is appended after the last instruction is processed with the verifying function from netdevsim. Output looks like the following: $ tc filter add dev foo ingress bpf obj sample_ret0.o \ sec .text verbose skip_sw Prog section '.text' loaded (5)! - Type: 3 - Instructions: 2 (0 over limit) - License: Verifier analysis: 0: (b7) r0 = 0 1: (95) exit [netdevsim] Hello from netdevsim! processed 2 insns, stack depth 0 "verbose" flag is required to see it in the console since netdevsim does not throw an error after printing the message. Signed-off-by: Quentin Monnet <quentin.monnet@netronome.com> Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-23netdevsim: don't compile BPF code if syscall not enabledJakub Kicinski2-1/+33
We should not compile netdevsim/bpf.c if BPF syscall is not enabled. Otherwise bpf core would have to provide wrappers for all functions offload drivers may call, even though system will never see a BPF object. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: Quentin Monnet <quentin.monnet@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-23selftests/bpf: add checks on extack messages for eBPF hw offload testsQuentin Monnet1-26/+86
Add checks to test that netlink extack messages are correctly displayed in some expected error cases for eBPF offload to netdevsim with TC and XDP. iproute2 may be built without libmnl support, in which case the extack messages will not be reported. Try to detect this condition, and when enountered print a mild warning to the user and skip the extack validation. Signed-off-by: Quentin Monnet <quentin.monnet@netronome.com> Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-23netdevsim: add extack support for TC eBPF offloadQuentin Monnet1-7/+28
Use the recently added extack support for TC eBPF filters in netdevsim. Signed-off-by: Quentin Monnet <quentin.monnet@netronome.com> Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-23net/sched: act_csum: don't use spinlock in the fast pathDavide Caratti2-15/+59
use RCU instead of spin_{,unlock}_bh() to protect concurrent read/write on act_csum configuration, to reduce the effects of contention in the data path when multiple readers are present. Signed-off-by: Davide Caratti <dcaratti@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-23net/sched: act_csum: use per-core statisticsDavide Caratti1-6/+4
use per-CPU counters, like other TC actions do, instead of maintaining one set of stats across all cores. This allows updating act_csum stats without the need of protecting them using spin_{,un}lock_bh() invocations. Signed-off-by: Davide Caratti <dcaratti@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-23net: link_watch: mark bonding link events urgentRoopa Prabhu1-1/+1
It takes 1sec for bond link down notification to hit user-space when all slaves of the bond go down. 1sec is too long for protocol daemons in user-space relying on bond notification to recover (eg: multichassis lag implementations in user-space). Since the link event code already marks team device port link events as urgent, this patch moves the code to cover all lag ports and master. Signed-off-by: Roopa Prabhu <roopa@cumulusnetworks.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Reviewed-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-23ARM: dts: imx6q-b450v3: Add switch port configurationSebastian Reichel1-0/+52
This adds support for the Marvell switch and names the network ports according to the labels, that can be found next to the connectors. The switch is connected to the host system using a PCI based network card. The PCI bus configuration has been written using the following information: root@b450v3# lspci -tv -[0000:00]---00.0-[01]----00.0 Intel Corporation I210 Gigabit Network Connection root@b450v3# lspci -nn 00:00.0 PCI bridge [0604]: Synopsys, Inc. Device [16c3:abcd] (rev 01) 01:00.0 Ethernet controller [0200]: Intel Corporation I210 Gigabit Network Connection [8086:1533] (rev 03) Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-23ARM: dts: imx6q-b650v3: Add switch port configurationSebastian Reichel1-0/+52
This adds support for the Marvell switch and names the network ports according to the labels, that can be found next to the connectors. The switch is connected to the host system using a PCI based network card. The PCI bus configuration has been written using the following information: root@b650v3# lspci -tv -[0000:00]---00.0-[01]----00.0 Intel Corporation I210 Gigabit Network Connection root@b650v3# lspci -nn 00:00.0 PCI bridge [0604]: Synopsys, Inc. Device [16c3:abcd] (rev 01) 01:00.0 Ethernet controller [0200]: Intel Corporation I210 Gigabit Network Connection [8086:1533] (rev 03) Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-23ARM: dts: imx6q-b850v3: Add switch port configurationSebastian Reichel1-0/+75
This adds support for the Marvell switch and names the network ports according to the labels, that can be found next to the connectors ("ID", "IX", "ePort 1", "ePort 2"). The switch is connected to the host system using a PCI based network card. The PCI bus configuration has been written using the following information: root@b850v3# lspci -tv -[0000:00]---00.0-[01]----00.0-[02-05]--+-01.0-[03]----00.0 Intel Corporation I210 Gigabit Network Connection +-02.0-[04]----00.0 Intel Corporation I210 Gigabit Network Connection \-03.0-[05]-- root@b850v3# lspci -nn 00:00.0 PCI bridge [0604]: Synopsys, Inc. Device [16c3:abcd] (rev 01) 01:00.0 PCI bridge [0604]: PLX Technology, Inc. PEX 8605 PCI Express 4-port Gen2 Switch [10b5:8605] (rev ab) 02:01.0 PCI bridge [0604]: PLX Technology, Inc. PEX 8605 PCI Express 4-port Gen2 Switch [10b5:8605] (rev ab) 02:02.0 PCI bridge [0604]: PLX Technology, Inc. PEX 8605 PCI Express 4-port Gen2 Switch [10b5:8605] (rev ab) 02:03.0 PCI bridge [0604]: PLX Technology, Inc. PEX 8605 PCI Express 4-port Gen2 Switch [10b5:8605] (rev ab) 03:00.0 Ethernet controller [0200]: Intel Corporation I210 Gigabit Network Connection [8086:1533] (rev 03) 04:00.0 Ethernet controller [0200]: Intel Corporation I210 Gigabit Network Connection [8086:1533] (rev 03) Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-23ARM: dts: imx6q-bx50v3: Add internal switchSebastian Reichel1-0/+62
B850v3, B650v3 and B450v3 all have a GPIO bit banged MDIO bus to communicate with a Marvell switch. On all devices the switch is connected to a PCI based network card, which needs to be referenced by DT, so this also adds the common PCI root node. Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-23net: dsa: Support internal phy on 'cpu' portSebastian Reichel4-32/+86
This adds support for enabling the internal PHY for a 'cpu' port. It has been tested on GE B850v3, B650v3 and B450v3, which have a built-in MV88E6240 switch hardwired to a PCIe based network card. On these machines the internal PHY of the i210 network card and the Marvell switch are connected to each other and must be enabled for properly using the switch. While the i210 PHY will be enabled when the network interface is enabled, the switch's port is not exposed as network interface. Additionally the mv88e6xxx driver resets the chip during probe, so the PHY is disabled without this patch. Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-23i40e: Fix channel addition in reset flowAmritha Nambiar1-0/+11
Fix recreating the channel VSIs during the reset flow to reconfigure the Tx rings and the queue context associated with the channel VSI. Also update the next_base_queue for the VSI while rebuilding the channel VSIs after a reset. Signed-off-by: Amritha Nambiar <amritha.nambiar@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2018-01-23i40evf: ignore link up if not runningAlan Brady1-12/+23
If we receive the link status message from PF with link up before queues are actually enabled, it will trigger a TX hang. This fixes the issue by ignoring a link up message if the VF state is not yet in RUNNING state. Signed-off-by: Alan Brady <alan.brady@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2018-01-23i40e: Delete an error message for a failed memory allocation in i40e_init_interrupt_scheme()Markus Elfring1-3/+2
Omit an extra message for a memory allocation failure in this function. This issue was detected by using the Coccinelle software. Signed-off-by: Markus Elfring <elfring@users.sourceforge.net> Acked-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2018-01-23i40e: Disable iWARP VSI PETCP_ENA flag on netdev down eventsShiraz Saleem2-18/+20
Client close is overloaded to handle both un-registration and netdev down event. On netdev down, i40iw client close is called which unregisters the RDMA dev and this is too destructive since the netdev is still registered. Do not call client close/open on netdev down/up events. Instead disable the PE TCP_ENA flag during a netdev down event. This blocks all TCP traffic to the RDMA Protocol Engine. On netdev up, re-enable the flag. Signed-off-by: Shiraz Saleem <shiraz.saleem@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2018-01-23i40e: simplify pointer dereferencesMitch Williams1-10/+8
Now that i40e_vsi_config_tc() has the pf and hw variable defined, use them, instead of dereferencing vsi->back. Much easier to read. Signed-off-by: Mitch Williams <mitch.a.williams@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2018-01-23i40e: check for invalid DCB configMitch Williams1-1/+33
The driver (and the entire netdev layer for that matter) assumes that TC0 will always be present in our DCB configuration. Unfortunately, this isn't always the case. Rather than fail to configure the VSI, let's go ahead and try to make it work, even though DCB will end up being disabled by the kernel. If the driver fails to configure DCB, the driver queries what's valid, then writes that back to the hardware, always forcing TC0. This fixes a bug where the driver could fail to adhere to ETS BW allocations if 8 TCs were configured on the switch. Signed-off-by: Mitch Williams <mitch.a.williams@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2018-01-23i40e/i40evf: Detect and recover hung queue scenarioSudheer Mogilappagari6-99/+115
In VFs, there is a known issue which can cause writebacks to not occur when interrupts are disabled and there are less than 4 descriptors resulting in TX timeout. Timeout can also occur due to lost interrupt. The current implementation for detecting and recovering from hung queues in the PF is problematic because it actually actively encourages lost interrupts. By triggering a SW interrupt, interrupts are forced on. If we are already in napi_poll and an interrupt fires, napi_poll will not be rescheduled and the interrupt is effectively lost; thereby potentially *causing* hung queues. This patch checks whether packets are being processed between every watchdog cycle and determine potential hung queue and fires triggers SW interrupt only for that particular queue. Signed-off-by: Sudheer Mogilappagari <sudheer.mogilappagari@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2018-01-23i40e: Fix for blinking activity instead of link LEDsMichal Kuchta1-3/+2
This fix solves an issue occurring while calling i40e_led_set function from the driver with "blink" parameter set as TRUE. This call resulted in Activity LED blinking instead of Link LED, which may lead to errors in physically identifying the port, since Activity LED may be blinking for different reasons as well. Signed-off-by: Michal Kuchta <michal.kuchta@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2018-01-23i40evf: Don't schedule reset_task when device is being removedAvinash Dayanand2-1/+9
When a host disables and enables a PF device, all the associated VFs are removed and added back in. It also generates a PFR which in turn resets all the connected VFs. This behaviour is different from that of Linux guest on Linux host. Hence we end up in a situation where there's a PFR and device removal at the same time. And watchdog doesn't have a clue about this and schedules a reset_task. This patch adds code to send signal to reset_task that the device is currently being removed. Signed-off-by: Avinash Dayanand <avinash.dayanand@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2018-01-23i40evf: remove flush_scheduled_work call in i40evf_removeSudheer Mogilappagari1-2/+0
flush_schedule_work blocks until completion of all scheduled work items in global work-queue. This can cause deadlock in some cases. i40evf_remove() cleans up necessary work items with cancel_delayed_work_sync and cancel_work_sync. This fix removes flush_schedule_work call inside i40evf_remove(). Signed-off-by: Sudheer Mogilappagari <sudheer.mogilappagari@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2018-01-23i40e: avoid divide by zeroMitch Williams1-2/+7
In some weird circumstances with DCB enabled, the firmware can fail to configure the VSI, leaving us with zero traffic classes. Check for this state when we configure RSS to avoid a panic. Signed-off-by: Mitch Williams <mitch.a.williams@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2018-01-23i40e/i40evf: Enable NVMUpdate to retrieve AdminQ and add preservation flags for NVM updatePawel Jablonski9-59/+173
This patch adds new I40E_NVMUPD_GET_AQ_EVENT state to allow retrieval of AdminQ events as a result of AdminQ commands sent to firmware. Add preservation flags support on X722 devices for NVM update AdminQ function wrapper. Add new parameter and handling to nvmupdate admin queue function intended to allow nvmupdate tool to configure the preservation flags in the AdminQ command. This is required to implement FlatNVM on X722 devices. Signed-off-by: Pawel Jablonski <pawel.jablonski@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2018-01-23ixgbe: register ipsec offload with the xfrm subsystemShannon Nelson2-0/+23
With all the support code in place we can now link in the ipsec offload operations and set the ESP feature flag for the XFRM subsystem to see. Signed-off-by: Shannon Nelson <shannon.nelson@oracle.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2018-01-23ixgbe: ipsec offload statsShannon Nelson4-1/+10
Add a simple statistic to count the ipsec offloads. Signed-off-by: Shannon Nelson <shannon.nelson@oracle.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2018-01-23ixgbe: process the Tx ipsec offloadShannon Nelson5-9/+112
If the skb has a security association referenced in the skb, then set up the Tx descriptor with the ipsec offload bits. While we're here, we fix an oddly named field in the context descriptor struct. Signed-off-by: Shannon Nelson <shannon.nelson@oracle.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2018-01-23ixgbe: process the Rx ipsec offloadShannon Nelson3-2/+115
If the chip sees and decrypts an ipsec offload, set up the skb sp pointer with the ralated SA info. Since the chip is rude enough to keep to itself the table index it used for the decryption, we have to do our own table lookup, using the hash for speed. Signed-off-by: Shannon Nelson <shannon.nelson@oracle.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2018-01-23ixgbe: restore offloaded SAs after a resetShannon Nelson3-0/+44
On a chip reset most of the table contents are lost, so must be restored. This scans the driver's ipsec tables and restores both the filled and empty table slots to their pre-reset values. Signed-off-by: Shannon Nelson <shannon.nelson@oracle.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2018-01-23ixgbe: add ipsec offload add and remove SAShannon Nelson3-1/+399
Add the functions for setting up and removing offloaded SAs (Security Associations) with the x540 hardware. We set up the callback structure but we don't yet set the hardware feature bit to be sure the XFRM service won't actually try to use us for an offload yet. The software tables are made up to mimic the hardware tables to make it easier to track what's in the hardware, and the SA table index is used for the XFRM offload handle. However, there is a hashing field in the Rx SA tracking that will be used to facilitate faster table searches in the Rx fast path. Signed-off-by: Shannon Nelson <shannon.nelson@oracle.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2018-01-23ixgbe: add ipsec data structuresShannon Nelson2-0/+45
Set up the data structures to be used by the ipsec offload. Signed-off-by: Shannon Nelson <shannon.nelson@oracle.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2018-01-23ixgbe: add ipsec engine start and stop routinesShannon Nelson1-0/+142
Add in the code for running and stopping the hardware ipsec encryption/decryption engine. It is good to keep the engine off when not in use in order to save on the power draw. Signed-off-by: Shannon Nelson <shannon.nelson@oracle.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2018-01-23ixgbe: add ipsec register access routinesShannon Nelson5-0/+222
Add a few routines to make access to the ipsec registers just a little easier, and throw in the beginnings of an initialization. Signed-off-by: Shannon Nelson <shannon.nelson@oracle.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.