aboutsummaryrefslogtreecommitdiffstats
path: root/.mailmap (unfollow)
AgeCommit message (Collapse)AuthorFilesLines
2015-10-12ipv4: Only compute net once in ip_call_ra_chainEric W. Biederman1-1/+2
ip_call_ra_chain is called early in the forwarding chain from ip_forward and ip_mr_input, which makes skb->dev the correct expression to get the input network device and dev_net(skb->dev) a correct expression for the network namespace the packet is being processed in. Compute the network namespace and store it in a variable to make the code clearer. Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-12packet: fix match_fanout_group()Eric Dumazet1-3/+3
Recent TCP listener patches exposed a prior af_packet bug : match_fanout_group() blindly assumes it is always safe to cast sk to a packet socket to compare fanout with af_packet_priv But SYNACK packets can be sent while attached to request_sock, which are smaller than a "struct sock". We can read non existent memory and crash. Fixes: c0de08d04215 ("af_packet: don't emit packet on orig fanout group") Fixes: ca6fb0651883 ("tcp: attach SYNACK messages to request sockets instead of listener") Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Willem de Bruijn <willemb@google.com> Cc: Eric Leblond <eric@regit.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-12ipv4/icmp: redirect messages can use the ingress daddr as sourcePaolo Abeni4-3/+33
This patch allows configuring how the source address of ICMP redirect messages is selected; by default the old behaviour is retained, while setting icmp_redirects_use_orig_daddr force the usage of the destination address of the packet that caused the redirect. The new behaviour fits closely the RFC 5798 section 8.1.1, and fix the following scenario: Two machines are set up with VRRP to act as routers out of a subnet, they have IPs x.x.x.1/24 and x.x.x.2/24, with VRRP holding on to x.x.x.254/24. If a host in said subnet needs to get an ICMP redirect from the VRRP router, i.e. to reach a destination behind a different gateway, the source IP in the ICMP redirect is chosen as the primary IP on the interface that the packet arrived at, i.e. x.x.x.1 or x.x.x.2. The host will then ignore said redirect, due to RFC 1122 section 3.2.2.2, and will continue to use the wrong next-op. Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-12bridge: try switchdev op first in __vlan_vid_add/delJiri Pirko1-36/+22
Some drivers need to implement both switchdev vlan ops and vid_add/kill ndos. For that to work in bridge code, we need to try switchdev op first when adding/deleting vlan id. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Acked-by: Scott Feldman <sfeldma@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-12BNX2: free temp_stats_blk on error pathwangweidong1-0/+2
In bnx2_init_board, missing free temp_stats_blk on error path when some operations do failed. Just add the 'kfree' operation. Signed-off-by: Wang Weidong <wangweidong1@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-12tcp: shrink tcp_timewait_sock by 8 bytesEric Dumazet2-2/+4
Reducing tcp_timewait_sock from 280 bytes to 272 bytes allows SLAB to pack 15 objects per page instead of 14 (on x86) Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-12net: shrink struct sock and request_sock by 8 bytesEric Dumazet9-25/+28
One 32bit hole is following skc_refcnt, use it. skc_incoming_cpu can also be an union for request_sock rcv_wnd. Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-12net: align sk_refcnt on 128 bytes boundaryEric Dumazet3-5/+16
sk->sk_refcnt is dirtied for every TCP/UDP incoming packet. This is a performance issue if multiple cpus hit a common socket, or multiple sockets are chained due to SO_REUSEPORT. By moving sk_refcnt 8 bytes further, first 128 bytes of sockets are mostly read. As they contain the lookup keys, this has a considerable performance impact, as cpus can cache them. These 8 bytes are not wasted, we use them as a place holder for various fields, depending on the socket type. Tested: SYN flood hitting a 16 RX queues NIC. TCP listener using 16 sockets and SO_REUSEPORT and SO_INCOMING_CPU for proper siloing. Could process 6.0 Mpps SYN instead of 4.2 Mpps Kernel profile looked like : 11.68% [kernel] [k] sha_transform 6.51% [kernel] [k] __inet_lookup_listener 5.07% [kernel] [k] __inet_lookup_established 4.15% [kernel] [k] memcpy_erms 3.46% [kernel] [k] ipt_do_table 2.74% [kernel] [k] fib_table_lookup 2.54% [kernel] [k] tcp_make_synack 2.34% [kernel] [k] tcp_conn_request 2.05% [kernel] [k] __netif_receive_skb_core 2.03% [kernel] [k] kmem_cache_alloc Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-12net: SO_INCOMING_CPU setsockopt() supportEric Dumazet6-11/+25
SO_INCOMING_CPU as added in commit 2c8c56e15df3 was a getsockopt() command to fetch incoming cpu handling a particular TCP flow after accept() This commits adds setsockopt() support and extends SO_REUSEPORT selection logic : If a TCP listener or UDP socket has this option set, a packet is delivered to this socket only if CPU handling the packet matches the specified one. This allows to build very efficient TCP servers, using one listener per RX queue, as the associated TCP listener should only accept flows handled in softirq by the same cpu. This provides optimal NUMA behavior and keep cpu caches hot. Note that __inet_lookup_listener() still has to iterate over the list of all listeners. Following patch puts sk_refcnt in a different cache line to let this iteration hit only shared and read mostly cache lines. Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-12packet: support per-packet fwmark for af_packet sendmsgEdward Jee1-1/+9
Signed-off-by: Edward Hyunkoo Jee <edjee@google.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Willem de Bruijn <willemb@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-12sock: support per-packet fwmarkEdward Jee2-0/+33
It's useful to allow users to set fwmark for an individual packet, without changing the socket state. The function this patch adds in sock layer can be used by the protocols that need such a feature. Signed-off-by: Edward Hyunkoo Jee <edjee@google.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Willem de Bruijn <willemb@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-12bpf: add unprivileged bpf testsAlexei Starovoitov2-10/+355
Add new tests samples/bpf/test_verifier: unpriv: return pointer checks that pointer cannot be returned from the eBPF program unpriv: add const to pointer unpriv: add pointer to pointer unpriv: neg pointer checks that pointer arithmetic is disallowed unpriv: cmp pointer with const unpriv: cmp pointer with pointer checks that comparison of pointers is disallowed Only one case allowed 'void *value = bpf_map_lookup_elem(..); if (value == 0) ...' unpriv: check that printk is disallowed since bpf_trace_printk is not available to unprivileged unpriv: pass pointer to helper function checks that pointers cannot be passed to functions that expect integers If function expects a pointer the verifier allows only that type of pointer. Like 1st argument of bpf_map_lookup_elem() must be pointer to map. (applies to non-root as well) unpriv: indirectly pass pointer on stack to helper function checks that pointer stored into stack cannot be used as part of key passed into bpf_map_lookup_elem() unpriv: mangle pointer on stack 1 unpriv: mangle pointer on stack 2 checks that writing into stack slot that already contains a pointer is disallowed unpriv: read pointer from stack in small chunks checks that < 8 byte read from stack slot that contains a pointer is disallowed unpriv: write pointer into ctx checks that storing pointers into skb->fields is disallowed unpriv: write pointer into map elem value checks that storing pointers into element values is disallowed For example: int bpf_prog(struct __sk_buff *skb) { u32 key = 0; u64 *value = bpf_map_lookup_elem(&map, &key); if (value) *value = (u64) skb; } will be rejected. unpriv: partial copy of pointer checks that doing 32-bit register mov from register containing a pointer is disallowed unpriv: pass pointer to tail_call checks that passing pointer as an index into bpf_tail_call is disallowed unpriv: cmp map pointer with zero checks that comparing map pointer with constant is disallowed unpriv: write into frame pointer checks that frame pointer is read-only (applies to root too) unpriv: cmp of frame pointer checks that R10 cannot be using in comparison unpriv: cmp of stack pointer checks that Rx = R10 - imm is ok, but comparing Rx is not unpriv: obfuscate stack pointer checks that Rx = R10 - imm is ok, but Rx -= imm is not Signed-off-by: Alexei Starovoitov <ast@plumgrid.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-12bpf: charge user for creation of BPF maps and programsAlexei Starovoitov5-2/+72
since eBPF programs and maps use kernel memory consider it 'locked' memory from user accounting point of view and charge it against RLIMIT_MEMLOCK limit. This limit is typically set to 64Kbytes by distros, so almost all bpf+tracing programs would need to increase it, since they use maps, but kernel charges maximum map size upfront. For example the hash map of 1024 elements will be charged as 64Kbyte. It's inconvenient for current users and changes current behavior for root, but probably worth doing to be consistent root vs non-root. Similar accounting logic is done by mmap of perf_event. Signed-off-by: Alexei Starovoitov <ast@plumgrid.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-12bpf: enable non-root eBPF programsAlexei Starovoitov5-15/+120
In order to let unprivileged users load and execute eBPF programs teach verifier to prevent pointer leaks. Verifier will prevent - any arithmetic on pointers (except R10+Imm which is used to compute stack addresses) - comparison of pointers (except if (map_value_ptr == 0) ... ) - passing pointers to helper functions - indirectly passing pointers in stack to helper functions - returning pointer from bpf program - storing pointers into ctx or maps Spill/fill of pointers into stack is allowed, but mangling of pointers stored in the stack or reading them byte by byte is not. Within bpf programs the pointers do exist, since programs need to be able to access maps, pass skb pointer to LD_ABS insns, etc but programs cannot pass such pointer values to the outside or obfuscate them. Only allow BPF_PROG_TYPE_SOCKET_FILTER unprivileged programs, so that socket filters (tcpdump), af_packet (quic acceleration) and future kcm can use it. tracing and tc cls/act program types still require root permissions, since tracing actually needs to be able to see all kernel pointers and tc is for root only. For example, the following unprivileged socket filter program is allowed: int bpf_prog1(struct __sk_buff *skb) { u32 index = load_byte(skb, ETH_HLEN + offsetof(struct iphdr, protocol)); u64 *value = bpf_map_lookup_elem(&my_map, &index); if (value) *value += skb->len; return 0; } but the following program is not: int bpf_prog1(struct __sk_buff *skb) { u32 index = load_byte(skb, ETH_HLEN + offsetof(struct iphdr, protocol)); u64 *value = bpf_map_lookup_elem(&my_map, &index); if (value) *value += (u64) skb; return 0; } since it would leak the kernel address into the map. Unprivileged socket filter bpf programs have access to the following helper functions: - map lookup/update/delete (but they cannot store kernel pointers into them) - get_random (it's already exposed to unprivileged user space) - get_smp_processor_id - tail_call into another socket filter program - ktime_get_ns The feature is controlled by sysctl kernel.unprivileged_bpf_disabled. This toggle defaults to off (0), but can be set true (1). Once true, bpf programs and maps cannot be accessed from unprivileged process, and the toggle cannot be set back to false. Signed-off-by: Alexei Starovoitov <ast@plumgrid.com> Reviewed-by: Kees Cook <keescook@chromium.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-12net: HNS: fix MDIO dependenciesArnd Bergmann1-3/+2
The newly introduced HNS_MDIO Kconfig symbol selects 'MDIO', but that is the wrong symbol as the code used by this driver is provided by PHYLIB rather than the MDIO driver. Also, there is no need to make this driver user selectable, because it is already selected by all drivers that need it. This changes the Kconfig file to select the correct library, and to make the option silent. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Fixes: 5b904d39406 ("net: add Hisilicon Network Subsystem MDIO support") Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-12sfc: fully reset if MC_REBOOT event received without warm_boot_count incrementDaniel Pieczko3-12/+32
On EF10, MC_CMD_VPORT_RECONFIGURE can cause a CODE_MC_REBOOT event to be sent to a function without incrementing the (adapter-wide) warm_boot_count. In this case, the reboot is not detected by the loop on efx_mcdi_poll_reboot(), so prepare for recovery from an MC reboot anyway. When this codepath is run, the MC has always just rebooted, so this recovery is valid. The loop on efx_mcdi_poll_reboot() is still required for other MC reboot cases, so that actions in response to an MC reboot are performed, such as clearing locally calculated statistics. Siena NICs are unaffected by this change as the above scenario does not apply. Signed-off-by: Shradha Shah <sshah@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-12rocker: handle setting bridge ageing_timeScott Feldman1-0/+16
The FDB cleanup timer will get rescheduled to re-evaluate FDB entries based on new ageing_time. Signed-off-by: Scott Feldman <sfeldma@gmail.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-12bridge: push bridge setting ageing_time down to switchdevScott Feldman5-7/+29
Use SWITCHDEV_F_SKIP_EOPNOTSUPP to skip over ports in bridge that don't support setting ageing_time (or setting bridge attrs in general). If push fails, don't update ageing_time in bridge and return err to user. If push succeeds, update ageing_time in bridge and run gc_timer now to recalabrate when to run gc_timer next, based on new ageing_time. Signed-off-by: Scott Feldman <sfeldma@gmail.com> Signed-off-by: Jiri Pirko <jiri@resnulli.us> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-12switchdev: skip over ports returning -EOPNOTSUPP when recursing portsScott Feldman2-1/+9
This allows us to recurse over all the ports, skipping over unsupporting ports. Without the change, the recursion would stop at first unsupported port. Signed-off-by: Scott Feldman <sfeldma@gmail.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-12switchdev: add bridge ageing_time attributeScott Feldman1-0/+2
Setting the stage to push bridge-level attributes down to port driver so hardware can be programmed accordingly. Bridge-level attribute example is ageing_time. This is a per-bridge attribute, not a per-bridge-port attr. Signed-off-by: Scott Feldman <sfeldma@gmail.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-12tcp: change type of alive from int to boolRichard Sailer1-3/+3
The alive parameter of tcp_orphan_retries, indicates whether the connection is assumed alive or not. In the function and all places calling it is used as a boolean value. Therefore this changes the type of alive to bool in the function definition and all calling locations. Since tcp_orphan_tries is a tcp_timer.c local function no change in any other file or header is necessary. Signed-off-by: Richard Sailer <richard@weltraumpflege.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-12bridge: allow adding of fdb entries pointing to the bridge deviceRoopa Prabhu2-30/+93
This patch enables adding of fdb entries pointing to the bridge device. This can be used to propagate mac address of vlan interfaces configured on top of the vlan filtering bridge. Before: $bridge fdb add 44:38:39:00:27:9f dev bridge RTNETLINK answers: Invalid argument After: $bridge fdb add 44:38:39:00:27:9f dev bridge Signed-off-by: Roopa Prabhu <roopa@cumulusnetworks.com> Reviewed-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-11tcp: fix RFS vs lockless listenersEric Dumazet2-0/+2
Before recent TCP listener patches, we were updating listener sk->sk_rxhash before the cloning of master socket. children sk_rxhash was therefore correct after the normal 3WHS. But with lockless listener, we no longer dirty/change listener sk_rxhash as it would be racy. We need to correctly update the child sk_rxhash, otherwise first data packet wont hit correct cpu if RFS is used. Fixes: 079096f103fa ("tcp/dccp: install syn_recv requests into ehash table") Signed-off-by: Eric Dumazet <edumazet@google.com> Reported-by: Willem de Bruijn <willemb@google.com> Cc: Tom Herbert <tom@herbertland.com> Acked-by: Tom Herbert <tom@herbertland.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-11net: dsa: use switchdev obj in port_fdb_delVivien Didelot4-5/+5
For consistency with the FDB add operation, propagate the switchdev_obj_port_fdb structure in the DSA drivers. Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Reviewed-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-11net: dsa: push prepare phase in port_fdb_addVivien Didelot4-6/+10
Now that the prepare phase is pushed down to the DSA drivers, propagate it to the port_fdb_add function. Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Reviewed-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-11net: dsa: add port_fdb_prepareVivien Didelot6-2/+26
Push the prepare phase for FDB operations down to the DSA drivers, with a new port_fdb_prepare function. Currently only mv88e6xxx is affected. Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Reviewed-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-11net: encx24j600: Fix typos in KconfigJon Ringle1-2/+2
Signed-off-by: Jon Ringle <jringle@gridpoint.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-11BNX2: fix a Null Pointer for stats_blkwangweidong2-27/+53
we have two processes to do: P1#: ifconfig eth0 down; which will call bnx2_close, then will , and set Null to stats_blk P2#: ifconfig eth0; which will call bnx2_get_stats64, it will use stats_blk. In one case: --P1#-- --P2#-- stats_blk(no null) bnx2_free_mem ->bp->stats_blk = NULL GET_64BIT_NET_STATS then it will cause 'NULL Pointer' Problem. it is as well with 'ethtool -S ethx'. Allocate the statistics block at probe time so that this problem is impossible Signed-off-by: Wang Weidong <wangweidong1@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-11net: synack packets can be attached to request socketsEric Dumazet3-5/+18
selinux needs few changes to accommodate fact that SYNACK messages can be attached to a request socket, lacking sk_security pointer (Only syncookies are still attached to a TCP_LISTEN socket) Adds a new sk_listener() helper, and use it in selinux and sch_fq Fixes: ca6fb0651883 ("tcp: attach SYNACK messages to request sockets instead of listener") Signed-off-by: Eric Dumazet <edumazet@google.com> Reported by: kernel test robot <ying.huang@linux.intel.com> Cc: Paul Moore <paul@paul-moore.com> Cc: Stephen Smalley <sds@tycho.nsa.gov> Cc: Eric Paris <eparis@parisplace.org> Acked-by: Paul Moore <paul@paul-moore.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-11cxgb4: Enhance driver to update FW, when FW is too oldHariprasad Shenai2-2/+6
t4_check_fw_version() can return several error codes (-EINVAL, -EBUSY, -EAGAIN). The present code sets the adapter state to UNINIT only if its an EFAULT. In all the error cases set the adapter to uninitialized state. In t4_check_fw_version() if call to t4_get_fw_version() fails, repeat the operation a few times before returning failure. Signed-off-by: Hariprasad Shenai <hariprasad@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-11bpf: fix cb access in socket filter programsAlexei Starovoitov5-18/+51
eBPF socket filter programs may see junk in 'u32 cb[5]' area, since it could have been used by protocol layers earlier. For socket filter programs used in af_packet we need to clean 20 bytes of skb->cb area if it could be used by the program. For programs attached to TCP/UDP sockets we need to save/restore these 20 bytes, since it's used by protocol layers. Remove SK_RUN_FILTER macro, since it's no longer used. Long term we may move this bpf cb area to per-cpu scratch, but that requires addition of new 'per-cpu load/store' instructions, so not suitable as a short term fix. Fixes: d691f9e8d440 ("bpf: allow programs to write to certain skb fields") Reported-by: Eric Dumazet <edumazet@google.com> Signed-off-by: Alexei Starovoitov <ast@plumgrid.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-09drivers/net/ethernet: make ti/cpsw-phy-sel.c explicitly non-modularPaul Gortmaker1-6/+4
The Kconfig currently controlling compilation of this code is: drivers/net/ethernet/ti/Kconfig:config TI_CPSW_PHY_SEL drivers/net/ethernet/ti/Kconfig: bool "TI CPSW Switch Phy sel Support" ...meaning that it currently is not being built as a module by anyone. Lets remove the couple traces of modularity so that when reading the driver there is no doubt it is builtin-only. Since module_platform_driver() uses the same init level priority as builtin_platform_driver() the init ordering remains unchanged with this commit. Also note that MODULE_DEVICE_TABLE is a no-op for non-modular code. We also delete the MODULE_LICENSE tag etc. since all that information was (or is now) contained at the top of the file in the comments. Cc: "David S. Miller" <davem@davemloft.net> Cc: Varka Bhadram <varkabhadram@gmail.com> Cc: netdev@vger.kernel.org Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-09net/sched: make sch_blackhole.c explicitly non-modularPaul Gortmaker1-12/+3
The Kconfig currently controlling compilation of this code is: net/sched/Kconfig:menuconfig NET_SCHED net/sched/Kconfig: bool "QoS and/or fair queueing" ...meaning that it currently is not being built as a module by anyone. Lets remove the modular code that is essentially orphaned, so that when reading the driver there is no doubt it is builtin-only. Since module_init translates to device_initcall in the non-modular case, the init ordering remains unchanged with this commit. We can change to one of the other priority initcalls (subsys?) at any later date, if desired. We also delete the MODULE_LICENSE tag since all that information is already contained at the top of the file in the comments. Cc: Jamal Hadi Salim <jhs@mojatatu.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: netdev@vger.kernel.org Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-09net/dcb: make dcbnl.c explicitly non-modularPaul Gortmaker1-27/+3
The Kconfig currently controlling compilation of this code is: net/dcb/Kconfig:config DCB net/dcb/Kconfig: bool "Data Center Bridging support" ...meaning that it currently is not being built as a module by anyone. Lets remove the modular code that is essentially orphaned, so that when reading the driver there is no doubt it is builtin-only. Since module_init translates to device_initcall in the non-modular case, the init ordering remains unchanged with this commit. We can change to one of the other priority initcalls (subsys?) at any later date, if desired. We also delete the MODULE_LICENSE tag etc. since all that information is (or is now) already contained at the top of the file in the comments. Cc: "David S. Miller" <davem@davemloft.net> Cc: Or Gerlitz <ogerlitz@mellanox.com> Cc: Anish Bhatt <anish@chelsio.com> Cc: John Fastabend <john.r.fastabend@intel.com> Cc: Shani Michaeli <shanim@mellanox.com> Cc: netdev@vger.kernel.org Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-09net/core: make sock_diag.c explicitly non-modularPaul Gortmaker1-11/+3
The Makefile currently controlling compilation of this code lists it under "obj-y" ...meaning that it currently is not being built as a module by anyone. Lets remove the modular code that is essentially orphaned, so that when reading the driver there is no doubt it is builtin-only. Since module_init translates to device_initcall in the non-modular case, the init ordering remains unchanged with this commit. We can change to one of the other priority initcalls (subsys?) at any later date, if desired. We can't remove module.h since the file uses other module related stuff even though it is not modular itself. We move the information from the MODULE_LICENSE tag to the top of the file, since that information is not captured anywhere else. The MODULE_ALIAS_NET_PF_PROTO becomes a no-op in the non modular case, so it is removed. Cc: "David S. Miller" <davem@davemloft.net> Cc: Eric Dumazet <edumazet@google.com> Cc: Nicolas Dichtel <nicolas.dichtel@6wind.com> Cc: Daniel Borkmann <daniel@iogearbox.net> Cc: Alexei Starovoitov <ast@plumgrid.com> Cc: Craig Gallek <kraig@google.com> Cc: netdev@vger.kernel.org Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-09net/core: lockdep_rtnl_is_held can be booleanYaowei Bai2-4/+4
This patch makes lockdep_rtnl_is_held return bool due to this particular function only using either one or zero as its return value. In another patch lockdep_is_held is also made return bool. No functional change. Signed-off-by: Yaowei Bai <bywxiaobai@163.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-09net/inetdevice: bad_mask can be booleanYaowei Bai1-4/+4
This patch makes bad_mask return bool due to this particular function only using either one or zero as its return value. No functional change. Signed-off-by: Yaowei Bai <bywxiaobai@163.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-09net/inetdevice: inet_ifa_match can be booleanYaowei Bai1-1/+1
This patch makes inet_ifa_match return bool due to this particular function only using either one or zero as its return value. No functional change. Signed-off-by: Yaowei Bai <bywxiaobai@163.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-09net/dccp: dccp_bad_service_code can be booleanYaowei Bai1-2/+2
This patch makes dccp_bad_service_code return bool due to these particular functions only using either one or zero as their return value. dccp_list_has_service is also been made return bool in this patchset. No functional change. Signed-off-by: Yaowei Bai <bywxiaobai@163.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-09net/dccp: dccp_list_has_service can be booleanYaowei Bai1-3/+3
This patch makes dccp_list_has_service return bool due to this particular function only using either one or zero as its return value. No functional change. Signed-off-by: Yaowei Bai <bywxiaobai@163.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-09net/can: can_dropped_invalid_skb can be booleanYaowei Bai1-3/+3
This patch makes can_dropped_invalid_skb return bool due to this particular function only using either one or zero as its return value. No functional change. Signed-off-by: Yaowei Bai <bywxiaobai@163.com> Acked-by: Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-09net/nfnetlink: lockdep_nfnl_is_held can be booleanYaowei Bai2-4/+4
This patch makes lockdep_nfnl_is_held return bool to improve readability due to this particular function only using either one or zero as its return value. No functional change. Signed-off-by: Yaowei Bai <bywxiaobai@163.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-09net/ieee80211: ieee80211_is_* can be booleanYaowei Bai1-38/+38
This patch makes ieee80211_is_* return bool to improve readability due to these particular functions only using either one or zero as their return value. No functional change. Signed-off-by: Yaowei Bai <bywxiaobai@163.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-09net/netlink: lockdep_genl_is_held can be booleanYaowei Bai2-2/+2
This patch makes lockdep_genl_is_held return bool to improve readability due to this particular function only using either one or zero as its return value. No functional change. Signed-off-by: Yaowei Bai <bywxiaobai@163.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-09net/mlx4_core: Fix resource tracker error flow in add_res_rangeSaeed Mahameed1-1/+3
The 'for' loop when undoing rb-tree insertions and list-adds in the error flow in add_res_range had errors, fix them. Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-09net/mlx4_core: Fix mailbox leak in error flow when performing update qpJack Morgenstein1-3/+3
The procedure mlx4_update_qp leaks mailboxes in its error-flow, fix that. Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-09net/mlx4_en: Add steering rules after RSS creationIdo Shamay1-64/+80
Changed the receive control flow in a way that steering rules are added only when the RSS object is already in RTR/RTS mode. Some optimization features, which are enabled by the device firmware, require this condition in order to be effective. Signed-off-by: Ido Shamay <idos@mellanox.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-09net/mlx5_core: Use private health thread for each deviceEli Cohen3-55/+52
Use a single threaded work queue for each device in the system instead of using one thread for any device. This is required so we can concurrently process system error handling for all the devices that need that. Signed-off-by: Eli Cohen <eli@mellanox.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-09net/mlx5_core: Use accessor functions to read from device memoryEli Cohen1-13/+22
Use ioread function to read health buffer data. In addition, print the firmware version as a string for readability and also use dev_err to have the device string to be printed. Signed-off-by: Eli Cohen <eli@mellanox.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-09net/mlx5_core: Prepare cmd interface to system errors handlingEli Cohen2-3/+23
In preparation to handling system errors at the mlx5_core level, change the interface of cmd_work_handler to accept a 64 bit argument for the vector. This allows to encode a flag that signifies when the handler is called as a result of a driver logic that wishes to terminate commands that the hardware may not be able to terminate. Such command completions are detected at the handler and proper return status is encoded. To be able to terminate page handler commands, we make sure to set the corresponding bit in the bitmask. Signed-off-by: Eli Cohen <eli@mellanox.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.