| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
commit 214bab448476 ("cifs: Call MID callback before destroying transport")
assumes that the MID callback should not take srv_mutex, this may not always
be true. SMB Direct requires the MID callback completed before calling
transport so all pending memory registration can be freed. So restore the
original calling sequence so TCP transport will use the same code, but moving
smbd_destroy() after all MID has been called.
fixes: 214bab448476 ("cifs: Call MID callback before destroying transport")
Signed-off-by: Long Li <longli@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Reviewed-by: Pavel Shilovsky <pshilov@microsoft.com>
|
|
This header is actually where signal_pending is defined
although either would work.
Signed-off-by: Ronnie Sahlberg <lsahlber@redhat.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
Minor cleanup - e.g. missing \n at end of debug statement.
Reported-by: Christoph Probst <kernel@probst.it>
Signed-off-by: Steve French <stfrench@microsoft.com>
Acked-by: Pavel Shilovsky <pshilov@microsoft.com>
|
|
Fix checkpatch warnings/errors in smb2ops.c except "LONG_LINE". Add missing
linebreaks, indentings, __func__. Remove void-returns, unneeded braces.
Address warnings spotted by checkpatch.
Add SPDX License Header.
Add missing "\n" and capitalize first letter in some cifs_dbg() strings.
Signed-off-by: Christoph Probst <kernel@probst.it>
Signed-off-by: Steve French <stfrench@microsoft.com>
Acked-by: Pavel Shilovsky <pshilov@microsoft.com>
|
|
Displaying the session id in /proc/fs/cifs/DebugData
is needed in order to correlate Linux client information
with network and server traces for many common support
scenarios. Turned out to be very important for debugging.
Signed-off-by: Steve French <stfrench@microsoft.com>
CC: Stable <stable@vger.kernel.org>
Reviewed-by: Pavel Shilovsky <pshilov@microsoft.com>
|
|
Pull cifs fixes from Steve French:
"CIFS/SMB3 changes:
- three fixes for stable
- add fiemap support
- improve zero-range support
- various RDMA (smb direct fixes)
I have an additional set of fixes (for improved handling of sparse
files, mode bits, POSIX extensions) that are still being tested that
are not included in this pull request but I expect to send in the next
week"
* tag '5.2-smb3' of git://git.samba.org/sfrench/cifs-2.6: (29 commits)
cifs: update module internal version number
SMB3: Clean up query symlink when reparse point
cifs: fix strcat buffer overflow and reduce raciness in smb21_set_oplock_level()
Negotiate and save preferred compression algorithms
cifs: rename and clarify CIFS_ASYNC_OP and CIFS_NO_RESP
cifs: fix credits leak for SMB1 oplock breaks
smb3: Add protocol structs for change notify support
cifs: fix smb3_zero_range for Azure
cifs: zero-range does not require the file is sparse
Add new flag on SMB3.1.1 read
cifs: add fiemap support
SMB3: Add defines for new negotiate contexts
cifs: fix bi-directional fsctl passthrough calls
cifs: smbd: take an array of reqeusts when sending upper layer data
SMB3: Add handling for different FSCTL access flags
cifs: Add support for FSCTL passthrough that write data to the server
cifs: remove superfluous inode_lock in cifs_{strict_}fsync
cifs: Call MID callback before destroying transport
cifs: smbd: Retry on memory registration failure
cifs: smbd: Indicate to retry on transport sending failure
...
|
|
Pull documentation updates from Jonathan Corbet:
"A reasonably busy cycle for docs, including:
- Lots of work on the Chinese and Italian translations
- Some license-rules clarifications from Christoph
- Various build-script fixes
- A new document on memory models
- RST conversion of the live-patching docs
- The usual collection of typo fixes and corrections"
* tag 'docs-5.2' of git://git.lwn.net/linux: (140 commits)
docs/livepatch: Unify style of livepatch documentation in the ReST format
docs: livepatch: convert docs to ReST and rename to *.rst
scripts/documentation-file-ref-check: detect broken :doc:`foo`
scripts/documentation-file-ref-check: don't parse Next/ dir
LICENSES: Rename other to deprecated
LICENSES: Clearly mark dual license only licenses
docs: Don't reference the ZLib license in license-rules.rst
docs/vm: Minor editorial changes in the THP and hugetlbfs
docs/vm: add documentation of memory models
doc:it_IT: translation alignment
doc: fix typo in PGP guide
dontdiff: update with Kconfig build artifacts
docs/zh_CN: fix typos in 1.Intro.rst file
docs/zh_CN: redirect CoC docs to Chinese version
doc: mm: migration doesn't use FOLL_SPLIT anymore
docs: doc-guide: remove the extension from .rst files
doc: kselftest: Fix KBUILD_OUTPUT usage instructions
docs: trace: fix some Sphinx warnings
docs: speculation.txt: mark example blocks as such
docs: ntb.txt: add blank lines to clean up some Sphinx warnings
...
|
|
Pull Kbuild updates from Masahiro Yamada:
- allow users to invoke 'make' out of the source tree
- refactor scripts/mkmakefile
- deprecate KBUILD_SRC, which was used to track the source tree
location for O= build.
- fix recordmcount.pl in case objdump output is localized
- turn unresolved symbols in external modules to errors from warnings
by default; pass KBUILD_MODPOST_WARN=1 to get them back to warnings
- generate modules.builtin.modinfo to collect .modinfo data from
built-in modules
- misc Makefile cleanups
* tag 'kbuild-v5.2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: (21 commits)
.gitignore: add more all*.config patterns
moduleparam: Save information about built-in modules in separate file
Remove MODULE_ALIAS() calls that take undefined macro
.gitignore: add leading and trailing slashes to generated directories
scripts/tags.sh: fix direct execution of scripts/tags.sh
scripts: override locale from environment when running recordmcount.pl
samples: kobject: allow CONFIG_SAMPLE_KOBJECT to become y
samples: seccomp: turn CONFIG_SAMPLE_SECCOMP into a bool option
kbuild: move Documentation to vmlinux-alldirs
kbuild: move samples/ to KBUILD_VMLINUX_OBJS
modpost: make KBUILD_MODPOST_WARN also configurable for external modules
kbuild: check arch/$(SRCARCH)/include/generated before out-of-tree build
kbuild: remove unneeded dependency for include/config/kernel.release
memory: squash drivers/memory/Makefile.asm-offsets
kbuild: use $(srctree) instead of KBUILD_SRC to check out-of-tree build
kbuild: mkmakefile: generate a simple wrapper of top Makefile
kbuild: mkmakefile: do not check the generated Makefile marker
kbuild: allow Kbuild to start from any directory
kbuild: pass $(MAKECMDGOALS) to sub-make as is
kbuild: fix warning "overriding recipe for target 'Makefile'"
...
|
|
Pull RISC-V nolibc header update from Willy Tarreau:
"This single commit adds support for the RISCV architecture to the
nolibc header file. Currently the file is only used by rcutorture but
Pranith Kumar who contributed it would like to have this work merged.
I only did some trivial tests to verify that it does not break x86,
which I consider sufficient since all the code is cleanly enclosed
inside a single #if/endif block"
* tag 'nolibc-5.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/wtarreau/nolibc:
tool headers nolibc: add RISCV support
|
|
Pull arch/csky updates from Guo Ren:
- Fixup vdsp&fpu issues in kernel
- Add dynamic function tracer
- Use in_syscall & forget_syscall instead of r11_sig
- Reconstruct signal processing
- Support dynamic start physical address
- Fixup wrong update_mmu_cache implementation
- Support vmlinux bootup with MMU off
- Use va_pa_offset instead of phys_offset
- Fixup syscall_trace return processing flow
- Add perf callchain support
- Add perf_arch_fetch_caller_regs support
- Add page fault perf event support
- Add support for perf registers sampling
* tag 'csky-for-linus-5.2-rc1' of git://github.com/c-sky/csky-linux:
csky/syscall_trace: Fixup return processing flow
csky: Fixup compile warning
csky: Add support for perf registers sampling
csky: add page fault perf event support
csky: Use va_pa_offset instead of phys_offset
csky: Support vmlinux bootup with MMU off
csky: Add perf_arch_fetch_caller_regs support
csky: Fixup wrong update_mmu_cache implementation
csky: Support dynamic start physical address
csky: Reconstruct signal processing
csky: Use in_syscall & forget_syscall instead of r11_sig
csky: Add non-uapi asm/ptrace.h namespace
csky: mm/fault.c: Remove duplicate header
csky: remove redundant generic-y
csky: Update syscall_trace_enter/exit implementation
csky: Add perf callchain support
csky/ftrace: Add dynamic function tracer (include graph tracer)
csky: Fixup vdsp&fpu issues in kernel
|
|
Pull media updates from Mauro Carvalho Chehab:
- remove the deprecated Zoran driver from staging
- new I2C driver: ST MIPID02 CSI-2 camera bridge
- new platform driver: Amlogic Meson AO CEC G12A Controller
- add support for USB audio via the media controller
- au0828 driver is now supported via the media controller on both on
media and on usbaudio
- new kernel test for the media device allocator
- add support for stateless decoder at vicodec driver
- lots of other driver improvements fixes and cleanups
* tag 'media/v5.1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (218 commits)
media: dt-bindings: aspeed-video: Add missing memory-region property
media: platform: Aspeed: Make reserved memory optional
media: platform: Aspeed: Remove use of reset line
media: stm32-dcmi: return appropriate error codes during probe
media: vsp1: Add support for missing 16-bit RGB555 formats
media: vsp1: Add support for missing 16-bit RGB444 formats
media: vsp1: Add support for missing 32-bit RGB formats
media: v4l: Add definitions for missing 16-bit RGB555 formats
media: v4l: Add definitions for missing 16-bit RGB4444 formats
media: v4l: Add definitions for missing 32-bit RGB formats
media: zoran: remove deprecated driver
media: MAINTAINERS: Update AO CEC with ao-cec-g12a driver
media: platform: meson: Add Amlogic Meson G12A AO CEC Controller driver
media: dt-bindings: media: meson-ao-cec: Add G12A AO-CEC-B Compatible
media: cros-ec-cec: decrement HDMI device refcount
media: seco-cec: decrement HDMI device refcount
media: tegra_cec: use new cec_notifier_parse_hdmi_phandle helper
media: stih_cec: use new cec_notifier_parse_hdmi_phandle helper
media: s5p_cec: use new cec_notifier_parse_hdmi_phandle helper
media: meson: ao-cec: use new cec_notifier_parse_hdmi_phandle helper
...
|
|
Pull IPMI updates from Corey Minyard:
"Some minor cleanups for the IPMI driver"
* tag 'for-linus-5.2' of git://github.com/cminyard/linux-ipmi:
ipmi: Remove warning if no slave address is present
ipmi:ssif: Only unregister the platform driver if it was registered
ipmi:ssif: compare block number correctly for multi-part return messages
ipmi: Add the i2c-addr property for SSIF interfaces
char/ipmi: fix spelling mistake "receieved_messages" -> "received_messages"
ipmi: avoid atomic_inc in exit function
ipmi: Remove file from ipmi_file_private
ipmi_si: remove an unused variable in try_smi_init()
ipmi: Make ipmi_interfaces_srcu variable static
|
|
Pull pin control updates from Linus Walleij:
"It is pretty calm and chill in pin control for the moment. Just
incremental development.
There is an odd patch to the Super-H architecture, it's coming from
the maintainers so should be fine.
Summary:
New drivers:
- Bitmain BM1880 pin controller
- Mediatek MT8516
- Cirrus Logich Lochnagar PMIC pins
Updates:
- Incremental development on Renesas SH-PFC
- Incremental development on Intel pin controller and some particular
updates for Cedarfork.
- Pin configuration support in Allwinner SunXi drivers
- Suspend/resume support in the NXP/Freescale i.MX8MQ driver
- Support for more packaging of the ST Micro STM32"
* tag 'pinctrl-v5.2-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (72 commits)
pinctrl: mcp23s08: Do not complain about unsupported params
pinctrl: Rework Kconfig dependency for BM1880 pinctrl driver
MAINTAINERS: Add entry for BM1880 pinctrl
pinctrl: Add pinctrl support for BM1880 SoC
dt-bindings: pinctrl: Add BM1880 pinctrl binding
pinctrl: stm32: check irq controller availability at probe
pinctrl: mediatek: Add MT8516 Pinctrl driver
pinctrl: zte: fix leaked of_node references
pinctrl: intel: Increase readability of intel_gpio_update_pad_mode()
pinctrl: intel: Retain HOSTSW_OWN for requested gpio pin
pinctrl: pistachio: fix leaked of_node references
pinctrl: sunxi: Support I/O bias voltage setting on H6
pinctrl: sunxi: Prepare for alternative bias voltage setting methods
pinctrl: st: fix leaked of_node references
pinctrl: samsung: fix leaked of_node references
pinctrl: stm32: align stm32mp157 pin names
pinctrl: stm32: add package information for stm32mp157c
pinctrl: stm32: introduce package support
dt-bindings: pinctrl: stm32: add new entry for package information
pinctrl: imx8mq: Add suspend/resume ops
...
|
|
Pull SCSI updates from James Bottomley:
"This is mostly update of the usual drivers: qla2xxx, qedf, smartpqi,
hpsa, lpfc, ufs, mpt3sas, ibmvfc and hisi_sas. Plus number of minor
changes, spelling fixes and other trivia"
* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (298 commits)
scsi: qla2xxx: Avoid that lockdep complains about unsafe locking in tcm_qla2xxx_close_session()
scsi: qla2xxx: Avoid that qlt_send_resp_ctio() corrupts memory
scsi: qla2xxx: Fix hardirq-unsafe locking
scsi: qla2xxx: Complain loudly about reference count underflow
scsi: qla2xxx: Use __le64 instead of uint32_t[2] for sending DMA addresses to firmware
scsi: qla2xxx: Introduce the dsd32 and dsd64 data structures
scsi: qla2xxx: Check the size of firmware data structures at compile time
scsi: qla2xxx: Pass little-endian values to the firmware
scsi: qla2xxx: Fix race conditions in the code for aborting SCSI commands
scsi: qla2xxx: Use an on-stack completion in qla24xx_control_vp()
scsi: qla2xxx: Make qla24xx_async_abort_cmd() static
scsi: qla2xxx: Remove unnecessary locking from the target code
scsi: qla2xxx: Remove qla_tgt_cmd.released
scsi: qla2xxx: Complain if a command is released that is owned by the firmware
scsi: qla2xxx: target: Fix offline port handling and host reset handling
scsi: qla2xxx: Fix abort handling in tcm_qla2xxx_write_pending()
scsi: qla2xxx: Fix error handling in qlt_alloc_qfull_cmd()
scsi: qla2xxx: Simplify qlt_send_term_imm_notif()
scsi: qla2xxx: Fix use-after-free issues in qla2xxx_qpair_sp_free_dma()
scsi: qla2xxx: Fix a qla24xx_enable_msix() error path
...
|
|
Pull tty/serial updates from Greg KH:
"Here is the "big" set of tty/serial driver patches for 5.2-rc1.
It's really pretty small, not much happening in this portion of the
kernel at the moment. When the "highlight" is the movement of the
documentation from .txt to .rst files, it's a good merge window.
There's a number of small fixes and updates over the various serial
drivers, and a new "tty null" driver for those embedded systems that
like to make things even smaller and not break things.
All of these have been in linux-next for a while with no reported
issues"
* tag 'tty-5.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (45 commits)
tty: serial: add driver for the SiFive UART
dt-bindings: serial: add documentation for the SiFive UART driver
serial: uartps: Add support for cts-override
dt-bindings: xilinx-uartps: Add support for cts-override
serial: milbeaut_usio: Fix error handling in probe and remove
tty: rocket: deprecate the rp_ioctl
tty: rocket: Remove RCPK_GET_STRUCT ioctl
tty: update obsolete termios comment
tty: serial_core: fix error code returned by uart_register_driver()
serial: 8250-mtk: modify baudrate setting
serial: 8250-mtk: add follow control
docs: serial: convert docs to ReST and rename to *.rst
serial: 8250_exar: Adjust IOT2000 matching
TTY: serial_core, add ->install
serial: Fix using plain integer instead of Null pointer
tty:serial_core: Spelling mistake
tty: Add NULL TTY driver
tty: vt: keyboard: Allow Unicode compose base char
Revert "tty: fix NULL pointer issue when tty_port ops is not set"
serial: Add Milbeaut serial control
...
|
|
Pull USB/PHY updates from Greg KH:
"Here is the big set of USB and PHY driver patches for 5.2-rc1
There is the usual set of:
- USB gadget updates
- PHY driver updates and additions
- USB serial driver updates and fixes
- typec updates and new chips supported
- mtu3 driver updates
- xhci driver updates
- other tiny driver updates
Nothing really interesting, just constant forward progress.
All of these have been in linux-next for a while with no reported
issues. The usb-gadget and usb-serial trees were merged a bit "late",
but both of them had been in linux-next before they got merged here
last Friday"
* tag 'usb-5.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (206 commits)
USB: serial: f81232: implement break control
USB: serial: f81232: add high baud rate support
USB: serial: f81232: clear overrun flag
USB: serial: f81232: fix interrupt worker not stop
usb: dwc3: Rename DWC3_DCTL_LPM_ERRATA
usb: dwc3: Fix default lpm_nyet_threshold value
usb: dwc3: debug: Print GET_STATUS(device) tracepoint
usb: dwc3: Do core validation early on probe
usb: dwc3: gadget: Set lpm_capable
usb: gadget: atmel: tie wake lock to running clock
usb: gadget: atmel: support USB suspend
usb: gadget: atmel_usba_udc: simplify setting of interrupt-enabled mask
dwc2: gadget: Fix completed transfer size calculation in DDMA
usb: dwc2: Set lpm mode parameters depend on HW configuration
usb: dwc2: Fix channel disable flow
usb: dwc2: Set actual frame number for completed ISOC transfer
usb: gadget: do not use __constant_cpu_to_le16
usb: dwc2: gadget: Increase descriptors count for ISOC's
usb: introduce usb_ep_type_string() function
usb: dwc3: move synchronize_irq() out of the spinlock protected block
...
|
|
This adds support for the RISCV architecture (32 and 64 bit) to the
nolibc header file.
Signed-off-by: Pranith Kumar <bobby.prani@gmail.com>
[willy: minimal rewording of the commit message]
Signed-off-by: Willy Tarreau <w@1wt.eu>
|
|
Pull networking updates from David Miller:
"Highlights:
1) Support AES128-CCM ciphers in kTLS, from Vakul Garg.
2) Add fib_sync_mem to control the amount of dirty memory we allow to
queue up between synchronize RCU calls, from David Ahern.
3) Make flow classifier more lockless, from Vlad Buslov.
4) Add PHY downshift support to aquantia driver, from Heiner
Kallweit.
5) Add SKB cache for TCP rx and tx, from Eric Dumazet. This reduces
contention on SLAB spinlocks in heavy RPC workloads.
6) Partial GSO offload support in XFRM, from Boris Pismenny.
7) Add fast link down support to ethtool, from Heiner Kallweit.
8) Use siphash for IP ID generator, from Eric Dumazet.
9) Pull nexthops even further out from ipv4/ipv6 routes and FIB
entries, from David Ahern.
10) Move skb->xmit_more into a per-cpu variable, from Florian
Westphal.
11) Improve eBPF verifier speed and increase maximum program size,
from Alexei Starovoitov.
12) Eliminate per-bucket spinlocks in rhashtable, and instead use bit
spinlocks. From Neil Brown.
13) Allow tunneling with GUE encap in ipvs, from Jacky Hu.
14) Improve link partner cap detection in generic PHY code, from
Heiner Kallweit.
15) Add layer 2 encap support to bpf_skb_adjust_room(), from Alan
Maguire.
16) Remove SKB list implementation assumptions in SCTP, your's truly.
17) Various cleanups, optimizations, and simplifications in r8169
driver. From Heiner Kallweit.
18) Add memory accounting on TX and RX path of SCTP, from Xin Long.
19) Switch PHY drivers over to use dynamic featue detection, from
Heiner Kallweit.
20) Support flow steering without masking in dpaa2-eth, from Ioana
Ciocoi.
21) Implement ndo_get_devlink_port in netdevsim driver, from Jiri
Pirko.
22) Increase the strict parsing of current and future netlink
attributes, also export such policies to userspace. From Johannes
Berg.
23) Allow DSA tag drivers to be modular, from Andrew Lunn.
24) Remove legacy DSA probing support, also from Andrew Lunn.
25) Allow ll_temac driver to be used on non-x86 platforms, from Esben
Haabendal.
26) Add a generic tracepoint for TX queue timeouts to ease debugging,
from Cong Wang.
27) More indirect call optimizations, from Paolo Abeni"
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1763 commits)
cxgb4: Fix error path in cxgb4_init_module
net: phy: improve pause mode reporting in phy_print_status
dt-bindings: net: Fix a typo in the phy-mode list for ethernet bindings
net: macb: Change interrupt and napi enable order in open
net: ll_temac: Improve error message on error IRQ
net/sched: remove block pointer from common offload structure
net: ethernet: support of_get_mac_address new ERR_PTR error
net: usb: smsc: fix warning reported by kbuild test robot
staging: octeon-ethernet: Fix of_get_mac_address ERR_PTR check
net: dsa: support of_get_mac_address new ERR_PTR error
net: dsa: sja1105: Fix status initialization in sja1105_get_ethtool_stats
vrf: sit mtu should not be updated when vrf netdev is the link
net: dsa: Fix error cleanup path in dsa_init_module
l2tp: Fix possible NULL pointer dereference
taprio: add null check on sched_nest to avoid potential null pointer dereference
net: mvpp2: cls: fix less than zero check on a u32 variable
net_sched: sch_fq: handle non connected flows
net_sched: sch_fq: do not assume EDT packets are ordered
net: hns3: use devm_kcalloc when allocating desc_cb
net: hns3: some cleanup for struct hns3_enet_ring
...
|
|
Pull Devicetree updates from Rob Herring:
- Fix possible memory leak in reserved-memory failure case
- Support for DMA parent bus which are not a parent node
- Clang -Wunsequenced fix
- Remove some unnecessary prints on memory alloc failures
- Various printk msg and comment fixes
- Update DT schema tools repository location
- Convert simple-framebuffer binding to DT schema
- Bindings for isl68137 and ir38064 trivial devices
- New documentation on binding do's and don't's for binding writers to
ignore
* tag 'devicetree-for-5.2' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (22 commits)
of: unittest: Remove error printing on OOM
of: irq: Remove WARN_ON() for kzalloc() failure
dt-bindings: pinctrl: fix bias-pull,up typo
dt-bindings: Update schema project location to devicetree.org github group
of: fix clang -Wunsequenced for be32_to_cpu()
of/device.c: fix the wrong comments
dt-bindings: Add isl68137 as a trivial device
dt-bindings: Add ir38064 as a trivial device
of: del redundant type conversion
dt-bindings: mfd: axp20x: Add fallback for axp805
of: Improve of_phandle_iterator_next() error message
dt-bindings: connector: Spelling mistake
dt-bindings: Add schemas for simple-framebuffer
of: address: Add support for the parent DMA bus
of: address: Retrieve a parent through a callback in __of_translate_address
dt-bindings: bus: Add binding for the Allwinner MBUS controller
dt-bindings: interconnect: Add a dma interconnect name
of: use correct function prototype for of_overlay_fdt_apply()
of: reserved_mem: fix reserve memory leak
of: property: Document that of_graph_get_endpoint_by_regs needs of_node_put
...
|
|
Pull randomness updates from Ted Ts'o:
- initialize the random driver earler
- fix CRNG initialization when we trust the CPU's RNG on NUMA systems
- other miscellaneous cleanups and fixes.
* tag 'random_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/random:
random: add a spinlock_t to struct batched_entropy
random: document get_random_int() family
random: fix CRNG initialization when random.trust_cpu=1
random: move rand_initialize() earlier
random: only read from /dev/random after its pool has received 128 bits
drivers/char/random.c: make primary_crng static
drivers/char/random.c: remove unused stuct poolinfo::poolbits
drivers/char/random.c: constify poolinfo_table
|
|
Pull fscrypt updates from Ted Ts'o:
"Clean up fscrypt's dcache revalidation support, and other
miscellaneous cleanups"
* tag 'fscrypt_for_linus' of git://git.kernel.org/pub/scm/fs/fscrypt/fscrypt:
fscrypt: cache decrypted symlink target in ->i_link
vfs: use READ_ONCE() to access ->i_link
fscrypt: fix race where ->lookup() marks plaintext dentry as ciphertext
fscrypt: only set dentry_operations on ciphertext dentries
fs, fscrypt: clear DCACHE_ENCRYPTED_NAME when unaliasing directory
fscrypt: fix race allowing rename() and link() of ciphertext dentries
fscrypt: clean up and improve dentry revalidation
fscrypt: use READ_ONCE() to access ->i_crypt_info
fscrypt: remove WARN_ON_ONCE() when decryption fails
fscrypt: drop inode argument from fscrypt_get_ctx()
|
|
To 2.20
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
Two of the common symlink formats use reparse points
(unlike mfsymlinks and also unlike the SMB1 posix
extensions). This is the first part of the fixes
to allow these reparse points (NFS style and Windows
symlinks) to be resolved properly as symlinks by the
client.
Signed-off-by: Ronnie Sahlberg <lsahlber@redhat.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
Change strcat to strncpy in the "None" case to fix a buffer overflow
when cinode->oplock is reset to 0 by another thread accessing the same
cinode. It is never valid to append "None" to any other message.
Consolidate multiple writes to cinode->oplock to reduce raciness.
Signed-off-by: Christoph Probst <kernel@probst.it>
Reviewed-by: Pavel Shilovsky <pshilov@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
CC: Stable <stable@vger.kernel.org>
|
|
New negotiate context (3) allows the server and client to
negotiate which compression algorithms to use. Add support
for this and save it off in the server structure.
Also now displayed in /proc/fs/cifs/DebugData (see below example
to Windows 10) where compression algoirthm "LZ77" was negotiated:
Servers:
Number of credits: 326 Dialect 0x311 COMPRESS_LZ77 signed
1) Name: 192.168.92.17 Uses: 1 Capability: 0x300067 Session Status: 1 TCP status: 1 Instance: 1
See MS-XCA and MS-SMB2 2.2.3.1 for more details.
Signed-off-by: Steve French <stfrench@microsoft.com>
Reviewed-by: Ronnie Sahlberg <lsahlber@redhat.com>
|
|
The flags were named confusingly.
CIFS_ASYNC_OP now just means that we will not block waiting for credits
to become available so we thus rename this to be CIFS_NON_BLOCKING.
Change CIFS_NO_RESP to CIFS_NO_RSP_BUF to clarify that we will actually get a
response from the server but we will not get/do not want a response buffer.
Delete CIFSSMBNotify. This is an SMB1 function that is not used.
Signed-off-by: Ronnie Sahlberg <lsahlber@redhat.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Reviewed-by: Pavel Shilovsky <pshilov@microsoft.com>
|
|
For SMB1 oplock breaks we would grab one credit while sending the PDU
but we would never relese the credit back since we will never receive a
response to this from the server. Eventuallt this would lead to a hang
once all credits are leaked.
Fix this by defining a new flag CIFS_NO_SRV_RSP which indicates that there
is no server response to this command and thus we need to add any credits back
immediately after sending the PDU.
CC: Stable <stable@vger.kernel.org> #v5.0+
Signed-off-by: Ronnie Sahlberg <lsahlber@redhat.com>
Reviewed-by: Pavel Shilovsky <pshilov@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
Add the SMB3 protocol flag definitions and structs for
change notify. Future patches will add the hooks to
allow it to be invoked from the client.
See MS-FSCC 2.6 and MS-SMB2 2.2.35
Signed-off-by: Steve French <stfrench@microsoft.com>
Reviewed-by: Ronnie Sahlberg <lsahlber@redhat.com>
|
|
For zero-range that also extend the file we were sending this as a
compound of two different operations; a fsctl to set-zero-data for the range
and then an additional set-info to extend the file size.
This does not work for Azure since it does not support this fsctl which leads
to fallocate(FALLOC_FL_ZERO_RANGE) failing but still changing the file size.
To fix this we un-compound this and send these two operations as separate
commands, firsat one command to set-zero-data for the range and it this
was successful we proceed to send a set-info to update the file size.
This fixes xfstest generic/469 for Azure servers.
Signed-off-by: Ronnie Sahlberg <lsahlber@redhat.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
Remove the conditional to fail zero-range if the file is not flagged as sparse.
You can still zero out a range in SMB2 even for non-sparse files.
Tested with stock windows16 server.
Fixes 5 xfstests (033, 149, 155, 180, 349)
Signed-off-by: Ronnie Sahlberg <lsahlber@redhat.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
For compressed read support. See MS-SMB2 3.1.4.4
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
Useful for improved copy performance as well as for
applications which query allocated ranges of sparse
files.
Signed-off-by: Ronnie Sahlberg <lsahlber@redhat.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
See the latest MS-SMB2 protocol specification updates.
These will be needed for implementing compression support
on the wire for example.
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
SMB2 Ioctl responses from servers may respond with both the request blob from
the client followed by the actual reply blob for ioctls that are bi-directional.
In that case we can not assume that the reply blob comes immediately after the
ioctl response structure.
This fixes FSCTLs such as SMB2:FSCTL_QUERY_ALLOCATED_RANGES
Signed-off-by: Ronnie Sahlberg <lsahlber@redhat.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
To support compounding, __smb_send_rqst() now sends an array of requests to
the transport layer.
Change smbd_send() to take an array of requests, and send them in as few
packets as possible.
Signed-off-by: Long Li <longli@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
CC: Stable <stable@vger.kernel.org>
|
|
DesiredAccess field in SMB3 open request needs
to be set differently for READ vs. WRITE ioctls
(not just ones that request both).
Originally noticed by Pavel
Signed-off-by: Steve French <stfrench@microsoft.com>
Reviewed-by: Ronnie Sahlberg <lsahlber@redhat.com>
|
|
Add support to pass a blob to the server in FSCTL passthrough.
Signed-off-by: Ronnie Sahlberg <lsahlber@redhat.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
Originally, filemap_write_and_wait took the i_mutex internally, but
commit 02c24a82187d pushed the mutex acquisition into the individual
fsync routines, leaving it up to the subsystem maintainers to remove
it if it wasn't needed.
For cifs, I see no reason to take the inode_lock here. All of the
operations inside that lock are protected in other ways.
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Acked-by: Pavel Shilovsky <pshilov@microsoft.com>
|
|
When transport is being destroyed, it's possible that some processes may
hold memory registrations that need to be deregistred.
Call them first so nobody is using transport resources, and it can be
destroyed.
Signed-off-by: Long Li <longli@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
Memory registration failure doesn't mean this I/O has failed, it means the
transport is hitting I/O error or needs reconnect. This error is not from
the server.
Indicate this error to upper layer, and let upper layer decide how to
reconnect and proceed with this I/O.
Signed-off-by: Long Li <longli@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
Failure to send a packet doesn't mean it's a permanent failure, it can't be
returned to user process. This I/O should be retried or failed based on
server packet response and transport health. This logic is handled by the
upper layer.
Give this decision to upper layer.
Signed-off-by: Long Li <longli@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
When packets are waiting for outbound I/O and interrupted, return the
proper error code to user process.
Signed-off-by: Long Li <longli@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
Now upper layer is handling the transport shutdown and reconnect, remove
the code that handling transport shutdown on RDMA disconnect.
Signed-off-by: Long Li <longli@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
On transport recoonect, upper layer CIFS code destroys the current
transport and then recoonect. This code path is not used by SMBD, in that
SMBD destroys its transport on RDMA disconnect notification independent of
CIFS upper layer behavior.
This approach adds some costs to SMBD layer to handle transport shutdown
and restart, and to deal with several racing conditions on reconnecting
transport.
Re-work this code path by introducing a new smbd_destroy. This function is
called form upper layer to ask SMBD to destroy the transport. SMBD will no
longer need to destroy the transport by itself while worrying about data
transfer is in progress. The upper layer guarantees the transport is
locked.
change log:
v2: fix build errors when CONFIG_CIFS_SMB_DIRECT is not configured
Signed-off-by: Long Li <longli@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
Trivial update to comment suggested by Pavel.
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
if we mount A then mount A again with nodfs, we shouldn't reuse the
superblock. document the purpose of the defines as well.
there are most likely more flags that needs to be added to this mask,
in fact the logic to find them should be which flag should
be *ignored* when trying to reuse an existing sb.
Signed-off-by: Aurelien Aptel <aaptel@suse.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
Missing parameter that should be displayed in the mount list
Reviewed-by: Ronnie Sahlberg <lsahlber@redhat.com>
Signed-off-by: Kenneth D'souza <kdsouza@redhat.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
As per MS-DFSC, when a DFS cache entry is expired and it is a DFS
link, then a new DFS referral must be sent to root server in order to
refresh the expired entry.
This patch ensures that all new DFS referrals for refreshing the cache
are sent to DFS root.
Signed-off-by: Paulo Alcantara (SUSE) <paulo@paulo.ac>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
A trivial patch.
cpu_to_le32() is capable enough to detect __builtin_constant_p()
and to use an appropriate compile time ___constant_swahb32()
function.
So we can use cpu_to_le32() instead of __constant_cpu_to_le32().
Signed-off-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
Also track minimum and maximum time by command in /proc/fs/cifs/Stats
Signed-off-by: Steve French <stfrench@microsoft.com>
|
Long Li
Ronnie Sahlberg
Steve French
Christoph Probst
Linus Torvalds
Pranith Kumar
Steve French
Jeff Layton
Aurelien Aptel
Kenneth D'souza
Paulo Alcantara (SUSE)
Sergey Senozhatsky