aboutsummaryrefslogtreecommitdiffstats
AgeCommit message (Collapse)AuthorFilesLines
2009-06-22mm/init: cpu_hotplug_init() must be initialized before SLABLinus Torvalds3-14/+5
SLAB uses get/put_online_cpus() which use a mutex which is itself only initialized when cpu_hotplug_init() is called. Currently we hang suring boot in SLAB due to doing that too late. Reported by James Bottomley and Sachin Sant (and possibly others). Debugged by Benjamin Herrenschmidt. This just removes the dynamic initialization of the data structures, and replaces it with a static one, avoiding this dependency entirely, and removing one unnecessary special initcall. Tested-by: Sachin Sant <sachinp@in.ibm.com> Tested-by: James Bottomley <James.Bottomley@HansenPartnership.com> Tested-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-06-22Merge git://git.infradead.org/mtd-2.6Linus Torvalds49-827/+3133
* git://git.infradead.org/mtd-2.6: (63 commits) mtd: OneNAND: Allow setting of boundary information when built as module jffs2: leaking jffs2_summary in function jffs2_scan_medium mtd: nand: Fix memory leak on txx9ndfmc probe failure. mtd: orion_nand: use burst reads with double word accesses mtd/nand: s3c6400 support for s3c2410 driver [MTD] [NAND] S3C2410: Use DIV_ROUND_UP [MTD] [NAND] S3C2410: Deal with unaligned lengths in S3C2440 buffer read/write [MTD] [NAND] S3C2410: Allow the machine code to get the BBT table from NAND [MTD] [NAND] S3C2410: Added a kerneldoc for s3c2410_nand_set mtd: physmap_of: Add multiple regions and concatenation support mtd: nand: max_retries off by one in mxc_nand mtd: nand: s3c2410_nand_setrate(): use correct macros for 2412/2440 mtd: onenand: add bbt_wait & unlock_all as replaceable for some platform mtd: Flex-OneNAND support mtd: nand: add OMAP2/OMAP3 NAND driver mtd: maps: Blackfin async: fix memory leaks in probe/remove funcs mtd: uclinux: mark local stuff static mtd: uclinux: do not allow to be built as a module mtd: uclinux: allow systems to override map addr/size mtd: blackfin NFC: fix hang when using NAND on BF527-EZKITs ...
2009-06-22Merge branch 'devel' of master.kernel.org:/home/rmk/linux-2.6-armLinus Torvalds57-222/+5269
* 'devel' of master.kernel.org:/home/rmk/linux-2.6-arm: (49 commits) [ARM] idle: clean up pm_idle calling, obey hlt_counter [ARM] S3C: Fix gpio-config off-by-one bug [ARM] S3C64XX: add to_irq() support for EINT() GPIO [ARM] S3C64XX: clock.c: fix typo in usb-host clock ctrlbit [ARM] S3C64XX: fix HCLK gate defines [ARM] Update mach-types [ARM] wire up rt_tgsigqueueinfo and perf_counter_open OMAP2 clock/powerdomain: off by 1 error in loop timeout comparisons OMAP3 SDRC: set FIXEDDELAY when disabling SDRC DLL OMAP3: Add support for DPLL3 divisor values higher than 2 OMAP3 SRAM: convert SRAM code to use macros rather than magic numbers OMAP3 SRAM: add more comments on the SRAM code OMAP3 clock/SDRC: program SDRC_MR register during SDRC clock change OMAP3 clock: add a short delay when lowering CORE clk rate OMAP3 clock: initialize SDRC timings at kernel start OMAP3 clock: remove wait for DPLL3 M2 clock to stabilize [ARM] Add old Feroceon support to compressed/head.S [ARM] 5559/1: Limit the stack unwinding caused by a kthread exit [ARM] 5558/1: Add extra checks to ARM unwinder to avoid tracing corrupt stacks [ARM] 5557/1: Discard some ARM.ex*.*exit.text sections when !HOTPLUG or !HOTPLUG_CPU ...
2009-06-22[ARM] idle: clean up pm_idle calling, obey hlt_counterRussell King1-26/+32
pm_idle is used by infrastructure (eg, cpuidle) which expects architectures to call it in a certain way. Arrange for ARM to follow x86's lead on this and call pm_idle() with interrupts already disabled. However, we expect pm_idle() to enable interrupts before it returns. Also, OMAP wants to be able to disable hlt-ing, so allow hlt_counter to prevent all calls to pm_idle. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-06-22MN10300: Fix the vmlinux ldscriptDavid Howells1-44/+16
Fix the MN10300 vmlinux ldscript. It needs to use various macros from asm-generic/vmlinux.lds.h to correctly include all that it needs to. Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-06-22LDSCRIPT: Name INIT_RAM_FS consistentlyDavid Howells1-1/+1
In asm-generic/vmlinux.lds.h, name INIT_RAM_FS consistently, no matter the setting of CONFIG_BLK_DEV_INITRD. This corrects: commit ef53dae8658cf0e93d380983824a661067948d87 Author: Sam Ravnborg <sam@ravnborg.org> Date: Sun Jun 7 20:46:37 2009 +0200 Subject: Improve vmlinux.lds.h support for arch specific linker scripts Signed-off-by: David Howells <dhowells@redhat.com> Acked-by: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-06-22Merge branch 'for-2.6.31' of git://fieldses.org/git/linux-nfsdLinus Torvalds29-700/+1329
* 'for-2.6.31' of git://fieldses.org/git/linux-nfsd: (60 commits) SUNRPC: Fix the TCP server's send buffer accounting nfsd41: Backchannel: minorversion support for the back channel nfsd41: Backchannel: cleanup nfs4.0 callback encode routines nfsd41: Remove ip address collision detection case nfsd: optimise the starting of zero threads when none are running. nfsd: don't take nfsd_mutex twice when setting number of threads. nfsd41: sanity check client drc maxreqs nfsd41: move channel attributes from nfsd4_session to a nfsd4_channel_attr struct NFS: kill off complicated macro 'PROC' sunrpc: potential memory leak in function rdma_read_xdr nfsd: minor nfsd_vfs_write cleanup nfsd: Pull write-gathering code out of nfsd_vfs_write nfsd: track last inode only in use_wgather case sunrpc: align cache_clean work's timer nfsd: Use write gathering only with NFSv2 NFSv4: kill off complicated macro 'PROC' NFSv4: do exact check about attribute specified knfsd: remove unreported filehandle stats counters knfsd: fix reply cache memory corruption knfsd: reply cache cleanups ...
2009-06-22Merge branch 'for-2.6.31' of git://git.linux-nfs.org/projects/trondmy/nfs-2.6Linus Torvalds49-603/+5220
* 'for-2.6.31' of git://git.linux-nfs.org/projects/trondmy/nfs-2.6: (128 commits) nfs41: sunrpc: xprt_alloc_bc_request() should not use spin_lock_bh() nfs41: Move initialization of nfs4_opendata seq_res to nfs4_init_opendata_res nfs: remove unnecessary NFS_INO_INVALID_ACL checks NFS: More "sloppy" parsing problems NFS: Invalid mount option values should always fail, even with "sloppy" NFS: Remove unused XDR decoder functions NFS: Update MNT and MNT3 reply decoding functions NFS: add XDR decoder for mountd version 3 auth-flavor lists NFS: add new file handle decoders to in-kernel mountd client NFS: Add separate mountd status code decoders for each mountd version NFS: remove unused function in fs/nfs/mount_clnt.c NFS: Use xdr_stream-based XDR encoder for MNT's dirpath argument NFS: Clean up MNT program definitions lockd: Don't bother with RPC ping for NSM upcalls lockd: Update NSM state from SM_MON replies NFS: Fix false error return from nfs_callback_up() if ipv6.ko is not available NFS: Return error code from nfs_callback_up() to user space NFS: Do not display the setting of the "intr" mount option NFS: add support for splice writes nfs41: Backchannel: CB_SEQUENCE validation ...
2009-06-22Merge branch 'for-linus' of git://git390.marist.edu/pub/scm/linux-2.6Linus Torvalds29-346/+350
* 'for-linus' of git://git390.marist.edu/pub/scm/linux-2.6: (22 commits) [S390] Update default configuration. [S390] kprobes: defer setting of ctlblk state [S390] Enable tick based perf_counter on s390. [S390] dasd: fix refcounting in dasd_change_state [S390] lockless idle time accounting [S390] driver_data access [S390] pm: fix build error for !SMP [S390] dasd_pm: fix stop flag handling [S390] ap/zcrypt: Suspend/Resume ap bus and zcrypt [S390] qdio: Sanitize do_QDIO sanity checks [S390] qdio: leave inbound SBALs primed [S390] qdio: merge AI tasklet into interrupt handler [S390] qdio: extract all primed SBALs at once [S390] qdio: fix check for running under z/VM [S390] qdio: move adapter interrupt tasklet code [S390] Use del_timer instead of del_timer_sync [S390] s390: remove DEBUG_MALLOC [S390] vt220 console: convert from bootmem to slab [S390] sclp console: convert from bootmem to slab [S390] 3270 console: convert from bootmem to slab ...
2009-06-22Merge branch 'next-i2c' of git://aeryn.fluff.org.uk/bjdooks/linuxLinus Torvalds2-4/+4
* 'next-i2c' of git://aeryn.fluff.org.uk/bjdooks/linux: i2c: Fix stuck transaction on cpm-i2c driver i2c-omap: Fix build breaking typo cpu_is_omap_2430
2009-06-22Merge git://git.kernel.org/pub/scm/linux/kernel/git/czankel/xtensa-2.6Linus Torvalds16-16/+2129
* git://git.kernel.org/pub/scm/linux/kernel/git/czankel/xtensa-2.6: xtensa: enable m41t80 driver in s6105_defconfig xtensa: add m41t62 rtc to s6105 platform xtensa: enable s6gmac in s6105_defconfig xtensa: s6105 specific configuration for s6gmac s6gmac: xtensa s6000 on-chip ethernet driver xtensa: support s6000 gpio irqs and alternate function selection xtensa: s6000 dma engine support xtensa: allow variant to initialize own irq chips xtensa: cache inquiry and unaligned cache handling functions
2009-06-22Merge branch 'linux-next' of git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci-2.6Linus Torvalds55-2167/+3004
* 'linux-next' of git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci-2.6: (74 commits) PCI: make msi_free_irqs() to use msix_mask_irq() instead of open coded write PCI: Fix the NIU MSI-X problem in a better way PCI ASPM: remove get_root_port_link PCI ASPM: cleanup pcie_aspm_sanity_check PCI ASPM: remove has_switch field PCI ASPM: cleanup calc_Lx_latency PCI ASPM: cleanup pcie_aspm_get_cap_device PCI ASPM: cleanup clkpm checks PCI ASPM: cleanup __pcie_aspm_check_state_one PCI ASPM: cleanup initialization PCI ASPM: cleanup change input argument of aspm functions PCI ASPM: cleanup misc in struct pcie_link_state PCI ASPM: cleanup clkpm state in struct pcie_link_state PCI ASPM: cleanup latency field in struct pcie_link_state PCI ASPM: cleanup aspm state field in struct pcie_link_state PCI ASPM: fix typo in struct pcie_link_state PCI: drivers/pci/slot.c should depend on CONFIG_SYSFS PCI: remove redundant __msi_set_enable() PCI PM: consistently use type bool for wake enable variable x86/ACPI: Correct maximum allowed _CRS returned resources and warn if exceeded ...
2009-06-22Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next-2.6Linus Torvalds40-633/+1210
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next-2.6: (43 commits) via-velocity: Fix velocity driver unmapping incorrect size. mlx4_en: Remove redundant refill code on RX mlx4_en: Removed redundant check on lso header size mlx4_en: Cancel port_up check in transmit function mlx4_en: using stop/start_all_queues mlx4_en: Removed redundant skb->len check mlx4_en: Counting all the dropped packets on the TX side usbnet cdc_subset: fix issues talking to PXA gadgets Net: qla3xxx, remove sleeping in atomic ipv4: fix NULL pointer + success return in route lookup path isdn: clean up documentation index cfg80211: validate station settings cfg80211: allow setting station parameters in mesh cfg80211: allow adding/deleting stations on mesh ath5k: fix beacon_int handling MAINTAINERS: Fix Atheros pattern paths ath9k: restore PS mode, before we put the chip into FULL SLEEP state. ath9k: wait for beacon frame along with CAB acer-wmi: fix rfkill conversion ath5k: avoid PCI FATAL interrupts by restoring RETRY_TIMEOUT disabling ...
2009-06-22Making fs/minix/minix.h double including safeHitoshi Mitake1-0/+5
I happened to find that fs/minix/minix.h doesn't guard double include. Yes, I know this never cause something destructive because this is self-evidence that no source file includes minix.h twice, but I think fixing this is better than disregarding it. Signed-off-by: Hitoshi Mitake <mitake@dcl.info.waseda.ac.jp> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-06-22msm: fixups to match current codeAlan Cox1-3/+8
The tty layer is now a bit more fussy about reporting the right baud rate back. Make the msm driver match the current state of affairs. Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-06-22msm_serial: serial driver for MSM7K onboard serial peripheral.Robert Love5-0/+898
Signed-off-by: Brian Swetland <swetland@google.com> Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-06-22timbuart: Fix for tx_emptyRichard Röjfors1-25/+25
Hardware updated to support TX FIFO empty. Signed-off-by: Richard Röjfors <richard.rojfors.ext@mocean-labs.com> Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-06-22tty: n_hdlc add buffer flushingPaul Fulghum1-9/+37
Add flush_buffer tty callback to flush rx buffers. Add TCFLSH ioctl processing to flush tx buffers. Increase default tx buffers from 1 to 3. Remove unneeded flush_buffer call in open callback. Remove vendor specific CVS version string. Signed-off-by: Paul Fulghum <paulkf@microgate.com> Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-06-22serial: samsung.c: mark s3c24xx_serial_remove as __devexitPeter Korsgaard8-8/+8
Mark the remove function as __devexit so it gets eliminated in CONFIG_HOTPLUG=n builds. Saves ~100 bytes. Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk> Acked-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-06-22serial@ add OMAP wakeup-enable registerKevin Hilman1-0/+1
Add the wakeup enable register to the list of OMAP-specific UART registers. This is to support forthcoming OMAP PM enhancements which use the wakeup feature of the OMAP's 8250-based UART. Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com> Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-06-22tty: fix some bogns in the serqt_usb2 driverAlan Cox1-19/+10
Remove the replicated urban legends from the comments and fix a couple of other silly calls Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-06-22ppp: Fix throttling bugsAlan Cox2-2/+0
The ppp layer goes around calling the unthrottle method from non sleeping paths. This isn't safe because the unthrottle methods in the tty layer need to be able to sleep (consider a USB dongle). Until now this didn't show up because the ppp layer never actually throttled a port so the unthrottle was always a no-op. Currently it's a mutex taking path so warnings are spewed if the unthrottle occurs via certain paths. Fix this by removing the unneccessary unthrottle calls. Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-06-22vt_ioctl: fix lock imbalanceJiri Slaby1-1/+2
Don't return from switch/case directly in vt_ioctl. Set ret and break instead so that we unlock BKL. Signed-off-by: Jiri Slaby <jirislaby@gmail.com> Signed-off-by: Alan Cox <alan@linux.intel.com> Cc: stable@kernel.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-06-22pcmcia/cm4000: fix lock imbalanceJiri Slaby1-1/+2
Don't return from switch/case, break instead, so that we unlock BKL. Signed-off-by: Jiri Slaby <jirislaby@gmail.com> Signed-off-by: Alan Cox <alan@linux.intel.com> Cc: stable@kernel.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-06-22n_r3964: fix lock imbalanceJiri Slaby1-12/+14
There is omitted BKunL in r3964_read. Centralize the paths to one point with one unlock. Signed-off-by: Jiri Slaby <jirislaby@gmail.com> Signed-off-by: Alan Cox <alan@linux.intel.com> Cc: stable@kernel.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-06-22serial: fix off by one errorsRoel Kluin3-7/+7
In zs_console_putchar() occurs: if (zs_transmit_drain(zport, irq)) write_zsdata(zport, ch); However if in zs_transmit_drain() no empty Tx Buffer occurs, limit reaches -1 => true, and the write still occurs. This patch changes postfix to prefix decrements in this and similar functions to prevent similar mistakes in the future. This decreases the iterations with one but the chosen loop count was arbitrary anyway. In sunhv limit reaches -1, not 0, so the test is off by one. Signed-off-by: Roel Kluin <roel.kluin@gmail.com> Acked-by: David S. Miller <davem@davemloft.net> Acked-by: Maciej W. Rozycki <macro@linux-mips.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-06-22serial: bfin_5xx: fix building as module when early printk is enabledMike Frysinger1-0/+4
Since early printk only makes sense/works when the serial driver is built into the kernel, disable the option for this driver when it is going to be built as a module. Otherwise we get build failures due to the ifdef handling. Signed-off-by: Mike Frysinger <vapier@gentoo.org> Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-06-22serial: bfin_5xx: add missing spin_lock initMike Frysinger1-0/+1
The Blackfin serial driver never initialized the spin_lock that is part of the serial core structure, but we never noticed because spin_lock's are rarely enabled on UP systems. Yeah lockdep and friends. Signed-off-by: Mike Frysinger <vapier@gentoo.org> Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-06-22bfin_jtag_comm: clean up printk usageMike Frysinger1-15/+15
The original patch garned some feedback and a v2 was posted, but that version seems to have been missed when merging the driver. At any rate, this cleans up the printk usage as suggested by Jiri Slaby. Signed-off-by: Mike Frysinger <vapier@gentoo.org> Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-06-22parport_pc: set properly the dma_mask for parport_pc deviceFUJITA Tomonori1-0/+3
parport_pc_probe_port() creates the own 'parport_pc' device if the device argument is NULL. Then parport_pc_probe_port() doesn't initialize the dma_mask and coherent_dma_mask of the device and calls dma_alloc_coherent with it. dma_alloc_coherent fails because dma_alloc_coherent() doesn't accept the uninitialized dma_mask: http://lkml.org/lkml/2009/6/16/150 Long ago, X86_32 and X86_64 had the own dma_alloc_coherent implementations; X86_32 accepted a device having dma_mask that is not initialized however X86_64 didn't. When we merged them, we chose to prohibit a device having dma_mask that is not initialized. I think that it's good to require drivers to set up dma_mask (and coherent_dma_mask) properly if the drivers want DMA. Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Reported-by: Malcom Blaney <malcolm.blaney@maptek.com.au> Tested-by: Malcom Blaney <malcolm.blaney@maptek.com.au> Cc: stable@kernel.org Signed-off-by: Alan Cox <alan@linux.intel.com> Acked-by: Jeff Garzik <jgarzik@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-06-22parport_pc: after superio probing restore original register valuesJens Rottmann1-6/+25
CONFIG_PARPORT_PC_SUPERIO probes for various superio chips by writing byte sequences to a set of different potential I/O ranges. But the probed ranges are not exclusive to parallel ports. Some of our boards just happen to have a watchdog in one of them. Took us almost a week to figure out why some distros reboot without warning after running flawlessly for 3 hours. For exactly 170 = 0xAA minutes, that is ... Fixed by restoring original values after probing. Also fixed too small request_region() in detect_and_report_it87(). Signed-off-by: Jens Rottmann <JRottmann@LiPPERTEmbedded.de> Signed-off-by: Alan Cox <alan@linux.intel.com> Cc: <stable@kernel.org> Acked-by: Jeff Garzik <jgarzik@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-06-22Revert "char: moxa, prevent opening unavailable ports"Linus Torvalds1-6/+1
This reverts commit a90b037583d5f1ae3e54e9c687c79df82d1d34a4, which already got fixed as commit f0e8527726b9e56649b9eafde3bc0fbc4dd2dd47: the same patch (trivial differences) got applied twice. Requested-by: Alan Cox <alan@lxorguk.ukuu.org.uk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-06-22Merge branch 'next-s3c' of git://aeryn.fluff.org.uk/bjdooks/linux into develRussell King4-7/+13
2009-06-22[ARM] S3C: Fix gpio-config off-by-one bugMarek Szyprowski1-1/+1
Fix gpio-config off-by-one bug. Without this patch, touching GPA0 pin on S3C64XX platform causes kernel oops. Reviewed-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2009-06-22[ARM] S3C64XX: add to_irq() support for EINT() GPIOMarek Szyprowski1-0/+6
N group Add to_irq() function to onvert gpio to irq for external interrupt group (GPN). Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2009-06-22[ARM] S3C64XX: clock.c: fix typo in usb-host clock ctrlbitPeter Korsgaard1-1/+1
The usb-host clock was using the wrong define (the SCLK enable for the usb-host-bus) to change the HCLK register instead of the HCLK_UHOST bit. Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk> Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2009-06-22[ARM] S3C64XX: fix HCLK gate definesPeter Korsgaard1-5/+5
A few typos seems to have sneaked into the HCLK gate defines, causing the usb host clock to not get enabled. Fix them according to the reference manual and throw in the 3d accel bit for good measure. Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk> Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2009-06-22[S390] Update default configuration.Martin Schwidefsky1-18/+54
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2009-06-22[S390] kprobes: defer setting of ctlblk stateHeiko Carstens1-11/+7
get_krobe_ctlblk returns a per cpu kprobe control block which holds the state of the current cpu wrt to kprobe. When inserting/removing a kprobe the state of the cpu which replaces the code is changed to KPROBE_SWAP_INST. This however is done when preemption is still enabled. So the state of the current cpu doesn't necessarily reflect the real state. To fix this move the code that changes the state to non-preemptible context. Reported-by: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2009-06-22[S390] Enable tick based perf_counter on s390.Martin Schwidefsky3-0/+15
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2009-06-22[S390] dasd: fix refcounting in dasd_change_stateSebastian Ott1-3/+5
To set a dasd online dasd_change_state is called twice. The first cycle will schedule initial analysis of the device, set the rc to -EAGAIN and will not touch the device state any more. The initial analysis will in turn call dasd_change_state to increase the state to the final DASD_STATE_ONLINE. If the dasd_change_state on the second thread outruns the other one both finish with the state set to DASD_STATE_ONLINE and the device refcount will be decreased by 2. Fix this by leaving dasd_change_state on rc == -EAGAIN so that the refcount will always be decreased by 1. Signed-off-by: Sebastian Ott <sebott@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2009-06-22[S390] lockless idle time accountingMartin Schwidefsky3-17/+35
Replace the spinlock used in the idle time accounting with a sequence counter mechanism analog to seqlock. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2009-06-22[S390] driver_data accessMartin Schwidefsky7-13/+13
Replace the remaining direct accesses to the driver_data pointer with calls to the dev_get_drvdata() and dev_set_drvdata() functions. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2009-06-22[S390] pm: fix build error for !SMPHeiko Carstens1-2/+4
Fix build error for !SMP: arch/s390/power/built-in.o: In function `swsusp_arch_resume': (.text+0x1b4): undefined reference to `smp_get_phys_cpu_id' arch/s390/power/built-in.o: In function `swsusp_arch_resume': (.text+0x288): undefined reference to `smp_switch_boot_cpu_in_resume' make: *** [.tmp_vmlinux1] Error 1 Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2009-06-22[S390] dasd_pm: fix stop flag handlingStefan Haberland2-10/+12
The stop flags are handled in the generic restore function so the stop flag is removed also for FBA and DIAG devices. Signed-off-by: Stefan Haberland <stefan.haberland@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2009-06-22[S390] ap/zcrypt: Suspend/Resume ap bus and zcryptFelix Beck1-2/+83
Add Suspend/Resume support to ap bus and zcrypt. All enhancements are done in the ap bus. No changes in the crypto card specific part are necessary. Signed-off-by: Felix Beck <felix.beck@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2009-06-22[S390] qdio: Sanitize do_QDIO sanity checksJan Glauber2-8/+3
Remove unneeded sanity checks from do_QDIO since this is the hot path. Change the type of bufnr and count to unsigned int so the check for the maximum value works. Reported-by: Roel Kluin <roel.kluin@gmail.com> Signed-off-by: Jan Glauber <jang@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2009-06-22[S390] qdio: leave inbound SBALs primedJan Glauber1-7/+0
It is not required to change the state of primed SBALs. Leaving them primed saves a SQBS instruction under z/VM. Signed-off-by: Jan Glauber <jang@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2009-06-22[S390] qdio: merge AI tasklet into interrupt handlerJan Glauber1-44/+21
Since the adapter interrupt tasklet only schedules the queue tasklets and contains no code that requires serialization in can be merged with the adapter interrupt handler. That possibly safes some CPU cycles. Signed-off-by: Jan Glauber <jang@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2009-06-22[S390] qdio: extract all primed SBALs at onceJan Glauber1-28/+6
For devices without QIOASSIST primed SBALS were extracted in a loop. Remove the loop since get_buf_states can already return more than one primed SBAL. Signed-off-by: Jan Glauber <jang@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.