| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
|
|
|
|
|
|
|
|
|
|
This codec was used in MFLD systems in the PMIC chip, we no longer have
users for this, so remove it
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
mfld_machine was not getting compiled due to missed Makefile changes.
Since no one complained it is safe to assume that it is not being used,
so remove it
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Drop "Intel ASoC SST driver for " platforms and "SOC Machine Audio driver
for Intel" for machines..
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Help in finding matching "if" endings by commenting the "endif".
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
No reason why SND_SOC_INTEL_SST should be set here.
Also make sure same dependencies are used everywhere (only last one has SPI
in addition). Replace X86_INTEL_LPSS by MFD_INTEL_LPSS since the former
makes no sense for Skylake+ devices
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-By: Vinod Koul <vinod.koul@intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Make sure all the configs are aligned
Also add the missing dependencies on SOC_ACPI stuff used to fix
DAI names based on HID and fix a couple of indentation issues
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-By: Vinod Koul <vinod.koul@intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Make sure that the same I2C/I2C_DESIGNWARE_PLATFORM are selected.
The latter might actually need to be moved to the SOC side of things,
it really has no place in a machine driver dependency
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-By: Vinod Koul <vinod.koul@intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
This patch fixes a number of issues:
1. IOSF_MBI is only needed for byt-cr detection, which is only supported
on Baytrail/Cherrytrail, move to HiFi2 config
2. SND_SOC_INTEL_SST should not select SND_SOC_INTEL_SST_ACPI, the latter
config is only valid for Haswell/Baytrail legacy but not needed by Skylake
3. SND_SST_IPC_ACPI, used only by the atom/sst driver, should not select
SND_SOC_INTEL_SST, none of the code under common/sst*.c is used
This nesting of configs really makes no sense, it's easier to maintain
if for each platform one can control what is strictly required.
Compiled-tested with each of Haswell, Baytrail legacy, HiFi2, SKL cases
selected independently. 0-day and explicit randconfig tests did not report
additional issues and no functionality loss was observed in Intel tests on
HIFI2 and SKYLAKE platforms
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-By: Vinod Koul <vinod.koul@intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Document in comments what the options are supposed to mean, before
clean-up in next patch.
No functionality change here.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-By: Vinod Koul <vinod.koul@intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
PCI/ACPI selections should not happen in Kconfig for machine drivers,
move to SOC selections.
Add distinction between PCI and ACPI HiFi2 platforms and help text.
There should be no functionality change.
The PCI-based platforms may be removed at some point since Medfield
is not really supported by anyone, and with Edison now defunct support for
Merrifield/Edison is to be determined.
The dependency on SND_DMA_SGBUF for Haswell is not clear at this
point and may have to be further updated.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-By: Vinod Koul <vinod.koul@intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Follow network example suggested by Linus, move Intel definitions
in if/endif block and clarify in help text which options distro
configurations should enable - everything except legacy Baytrail stuff and
NOCODEC (test only)
To avoid user confusion, machine drivers are handled with a submenu made
dependent on this top-level selector.
There should be no functionality change - except that sound capabilities
are restored when using older configs without any user selection.
Note that the SND_SOC_ACPI_INTEL_MATCH config is currently filtered
out by the top-level selector. This will change in the near future to
allow for this option to be selected by both SST and SOF drivers
(simplification with submenu for machine drivers by Vinod Koul)
Fixes: f6a118a800e3 ("ASoC: Intel: clarify Kconfig dependencies")
Reported-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
When restoring registers during runtime resume, we must not write to
I2S_TXDR which is the transmit FIFO as this queues up a sample to be
output and pushes all of the output channels down by one.
This can be demonstrated with the speaker-test utility:
for i in a b c; do speaker-test -c 2 -s 1; done
which should play a test through the left speaker three times but if the
I2S hardware starts runtime suspended the first sample will be played
through the right speaker.
Fix this by marking I2S_TXDR as volatile (which also requires marking it
as readble, even though it technically isn't). This seems to be the
most robust fix, the alternative of giving I2S_TXDR a default value is
more fragile since it does not prevent regcache writing to the register
in all circumstances.
While here, also fix the configuration of I2S_RXDR and I2S_FIFOLR; these
are not writable so they do not suffer from the same problem as I2S_TXDR
but reading from I2S_RXDR does suffer from a similar problem.
Fixes: f0447f6cbb20 ("ASoC: rockchip: i2s: restore register during runtime_suspend/resume cycle", 2016-09-07)
Signed-off-by: John Keeping <john@metanate.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Cc: stable@vger.kernel.org
|
|
Add the DAPM widgets and routes.
Tested with MinnowMax Turbot + rt5651 eval board with Speaker
(LineOut) -> LineIn loopback
Thanks to Bard Liao @ Realtek for providing the 0dB settings
"IN Capture Volume" = 23
"ADC Capture Volume" = 47
"OUT Playback Volume" = 31
"DAC1 Playback Volume" = 175
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Acked-By: Vinod Koul <vinod.koul@intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Define DMI quirk for rt5651 eval board connected to MinnowBoard
Turbot. The only difference with a MinnowBoard MAX is that the MCLK
pin is enabled on the LSE connector
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Tested-by: Keqiao.Zhang <Keqiao.zhang@intel.com>
Acked-By: Vinod Koul <vinod.koul@intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
On Minnowboard Max with Realtek rt5651 eval board, the IN3P is
connected to Headset Mic.
Here add and select it for Minnowboard Max.
Signed-off-by: Keyon Jie <yang.jie@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Acked-By: Vinod Koul <vinod.koul@intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The current code doesn't enable the MCLK which reduces audio quality
(PLL driven from BLCK), fix the quirk
Tested-by: Carlo Caione <carlo@caione.org>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Acked-By: Vinod Koul <vinod.koul@intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
This patch fixes 3 small issues:
- missing 2nd '*' at the beginning of a doxygen comment
- extra space after a '\n' in a dev_dbg message
- extra tab before a 'return" statement
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
In some error handling paths, an error code is assiegned to 'ret'.
However, the function always return 0.
Fix it and return the error code if such an error paths is taken.
Fixes: 3d9ff34622ba ("ASoC: Intel: sst: add stream operations")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
0-day reports compilation issues with non-ACPI platforms.
In file included from sound/soc/soc-acpi.c:17:0:
>> include/sound/soc-acpi.h:36:46: error: 'ACPI_ID_LEN' undeclared here
(not in a function); did you mean 'ACPI_FILE'?
snd_soc_acpi_find_name_from_hid(const u8 hid[ACPI_ID_LEN])
sound/soc/soc-acpi.c: At top level:
>> sound/soc/soc-acpi.c:174:16: error: expected declaration specifiers or
'...' before string constant
MODULE_LICENSE("GPL v2");
Add missing include files.
Fixes: 7feb2f786a46 ("ASoC: move ACPI common code out of Intel/sst tree")
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-By: Vinod Koul <vinod.koul@intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Replace snd_soc_acpi_check_hid() with the generic acpi_dev_present()
and remove the now unused snd_soc_acpi_check_hid function. This should
have no functional change.
Signed-off-by: Jeremy Cline <jeremy@jcline.org>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
|
|
The ACPI/machine-driver code refactoring introduced in 4.13 introduced
a regression for cases where we need a DMI-based quirk to select the
machine driver (the BIOS reports an invalid HID). The fix is just to
make sure the results of the quirk are actually used.
Fixes: 54746dabf770 ('ASoC: Improve machine driver selection based on quirk data')
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=96691
Tested-by: Nicole Færber <nicole.faerber@dpin.de>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Cc: stable@vger.kernel.org
|
|
|
|
Pull parisc fixes from Helge Deller:
- Many small fixes to show the real physical addresses of devices
instead of hashed addresses.
- One important fix to unbreak 32-bit SMP support: We forgot to 16-byte
align the spinlocks in the assembler code.
- Qemu support: The host will get a chance to sleep when the parisc
guest is idle. We use the same mechanism as the power architecture by
overlaying the "or %r10,%r10,%r10" instruction which is simply a nop
on real hardware.
* 'parisc-4.15-3' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux:
parisc: qemu idle sleep support
parisc: Fix alignment of pa_tlb_lock in assembly on 32-bit SMP kernel
parisc: Show unhashed EISA EEPROM address
parisc: Show unhashed HPA of Dino chip
parisc: Show initial kernel memory layout unhashed
parisc: Show unhashed hardware inventory
|
|
Pull apparmor fix from John Johansen:
"This fixes a regression when the kernel feature set is reported as
supporting mount and policy is pinned to a feature set that does not
support mount mediation"
* tag 'apparmor-pr-2018-01-07' of git://git.kernel.org/pub/scm/linux/kernel/git/jj/linux-apparmor:
apparmor: fix regression in mount mediation when feature set is pinned
|
|
Pull LED fix from Jacek Anaszewski:
"The commit 2b83ff96f51d for 4.15-rc6, which was fixing LED brightness
setting after clearing delay_off broke the behavior on any alteration
of delay_on{off} properties, due to use of a LED core helper that does
too much for this particular case"
* tag 'led_fixes_for_4.15-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/j.anaszewski/linux-leds:
leds: core: Fix regression caused by commit 2b83ff96f51d
|
|
Pull MTD bugfix from Richard Weinberger:
"A single fix for the pxa3xx NAND driver"
* tag 'for-linus-20180107' of git://git.infradead.org/linux-mtd:
mtd: nand: pxa3xx: Fix READOOB implementation
|
|
Commit 2b83ff96f51d ("led: core: Fix brightness setting when setting delay_off=0")
replaced del_timer_sync(&led_cdev->blink_timer) with led_stop_software_blink()
in led_blink_set(), which additionally clears LED_BLINK_SW flag as well as
zeroes blink_delay_on and blink_delay_off properties of the struct led_classdev.
Cleansing of the latter ones wasn't required to fix the original issue but
wasn't considered harmful. It nonetheless turned out to be so in case when
pointer to one or both props is passed to led_blink_set() like in the
ledtrig-timer.c. In such cases zeroes are passed later in delay_on and/or
delay_off arguments to led_blink_setup(), which results either in stopping
the software blinking or setting blinking frequency always to 1Hz.
Avoid using led_stop_software_blink() and add a single call required
to clear LED_BLINK_SW flag, which was the only needed modification to
fix the original issue.
Fixes 2b83ff96f51d ("led: core: Fix brightness setting when setting delay_off=0")
Signed-off-by: Jacek Anaszewski <jacek.anaszewski@gmail.com>
|
|
Pull vfs fixes from Al Viro:
- untangle sys_close() abuses in xt_bpf
- deal with register_shrinker() failures in sget()
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
fix "netfilter: xt_bpf: Fix XT_BPF_MODE_FD_PINNED mode of 'xt_bpf_info_v1'"
sget(): handle failures of register_shrinker()
mm,vmscan: Make unregister_shrinker() no-op if register_shrinker() failed.
|
|
Pull KVM fixes from Radim Krčmář:
"s390:
- Two fixes for potential bitmap overruns in the cmma migration code
x86:
- Clear guest provided GPRs to defeat the Project Zero PoC for CVE
2017-5715"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
kvm: vmx: Scrub hardware GPRs at VM-exit
KVM: s390: prevent buffer overrun on memory hotplug during migration
KVM: s390: fix cmma migration for multiple memory slots
|
|
In the current driver, OOB bytes are accessed in raw mode, and when a
page access is done with NDCR_SPARE_EN set and NDCR_ECC_EN cleared, the
driver must read the whole spare area (64 bytes in case of a 2k page,
16 bytes for a 512 page). The driver was only reading the free OOB
bytes, which was leaving some unread data in the FIFO and was somehow
leading to a timeout.
We could patch the driver to read ->spare_size + ->ecc_size instead of
just ->spare_size when READOOB is requested, but we'd better make
in-band and OOB accesses consistent.
Since the driver is always accessing in-band data in non-raw mode (with
the ECC engine enabled), we should also access OOB data in this mode.
That's particularly useful when using the BCH engine because in this
mode the free OOB bytes are also ECC protected.
Fixes: 43bcfd2bb24a ("mtd: nand: pxa3xx: Add driver-specific ECC BCH support")
Cc: stable@vger.kernel.org
Reported-by: Sean Nyekjær <sean.nyekjaer@prevas.dk>
Tested-by: Willy Tarreau <w@1wt.eu>
Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
Acked-by: Ezequiel Garcia <ezequiel@vanguardiasur.com.ar>
Tested-by: Sean Nyekjaer <sean.nyekjaer@prevas.dk>
Acked-by: Robert Jarzmik <robert.jarzmik@free.fr>
Signed-off-by: Richard Weinberger <richard@nod.at>
|
|
Pull powerpc fix from Michael Ellerman:
"Just one fix to correctly return SEGV_ACCERR when we take a SEGV on a
mapped region. The bug was introduced in the refactoring of the page
fault handler we did in the previous release.
Thanks to John Sperbeck"
* tag 'powerpc-4.15-6' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
powerpc/mm: Fix SEGV on mapped region to return SEGV_ACCERR
|
|
KVM: s390: fixes for cmma migration
Two fixes for potential bitmap overruns in the cmma migration
code.
|
|
Add qemu idle sleep support when running under qemu with SeaBIOS PDC
firmware.
Like the power architecture we use the "or" assembler instructions,
which translate to nops on real hardware, to indicate that qemu shall
idle sleep.
Signed-off-by: Helge Deller <deller@gmx.de>
Cc: Richard Henderson <rth@twiddle.net>
CC: stable@vger.kernel.org # v4.9+
|
|
Pull input fixes from Dmitry Torokhov:
"Just a few driver fixups, nothing exciting"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
Input: xen-kbdfront - do not advertise multi-touch pressure support
Input: hideep - fix compile error due to missing include file
Input: elants_i2c - do not clobber interrupt trigger on x86
Input: joystick/analog - riscv has get_cycles()
Input: elantech - add new icbody type 15
Input: ims-pcu - fix typo in the error message
|
|
Pull IOMMU fixes from Alex Williamson:
"Fixes via Will Deacon for arm-smmu-v3.
- Fix duplicate Stream ID handling in arm-smmu-v3
- Fix arm-smmu-v3 page table ops double free"
* tag 'iommu-v4.15-rc7' of git://github.com/awilliam/linux-vfio:
iommu/arm-smmu-v3: Cope with duplicated Stream IDs
iommu/arm-smmu-v3: Don't free page table ops twice
|
|
Pull ARC fixes from Vineet Gupta:
- platform updates for setting up clock correctly
- fixes to accomodate newer gcc (__builtin_trap, removed inline asm
modifier)
- other fixes
* tag 'arc-4.15-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/vgupta/arc:
ARC: handle gcc generated __builtin_trap for older compiler
ARC: handle gcc generated __builtin_trap()
ARC: uaccess: dont use "l" gcc inline asm constraint modifier
ARC: [plat-axs103] refactor the quad core DT quirk code
ARC: [plat-axs103]: Set initial core pll output frequency
ARC: [plat-hsdk]: Get rid of core pll frequency set in platform code
ARC: [plat-hsdk]: Set initial core pll output frequency
ARC: [plat-hsdk] Switch DisplayLink driver from fbdev to DRM
arc: do not use __print_symbol()
ARC: Fix detection of dual-issue enabled
|
|
When the mount code was refactored for Labels it was not correctly
updated to check whether policy supported mediation of the mount
class. This causes a regression when the kernel feature set is
reported as supporting mount and policy is pinned to a feature set
that does not support mount mediation.
BugLink: https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=882697#41
Fixes: 2ea3ffb7782a ("apparmor: add mount mediation")
Reported-by: Fabian Grünbichler <f.gruenbichler@proxmox.com>
Cc: Stable <stable@vger.kernel.org>
Signed-off-by: John Johansen <john.johansen@canonical.com>
|
|
Pull btrfs fixes from David Sterba:
"We have two more fixes for 4.15, both aimed for stable.
The leak fix is obvious, the second patch fixes a bug revealed by the
refcount API, when it behaves differently than previous atomic_t and
reports refs going from 0 to 1 in one case"
* tag 'for-4.15-rc7-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
btrfs: fix refcount_t usage when deleting btrfs_delayed_nodes
btrfs: Fix flush bio leak
|
|
Pull XFS fixes from Darrick Wong:
"I have just a few fixes for bugs and resource cleanup problems this
week:
- Fix resource cleanup of failed quota initialization
- Fix integer overflow problems wrt s_maxbytes"
* tag 'xfs-4.15-fixes-10' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux:
xfs: fix s_maxbytes overflow problems
xfs: quota: check result of register_shrinker()
xfs: quota: fix missed destroy of qi_tree_lock
|
|
Pull MFD fix from Lee Jones:
"Late bugfix to plug a leak in rtsx_pcr"
* tag 'mfd-fixes-4.15-1' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd:
mfd: rtsx: Release IRQ during shutdown
|
|
Pull more x86 pti fixes from Thomas Gleixner:
"Another small stash of fixes for fallout from the PTI work:
- Fix the modules vs. KASAN breakage which was caused by making
MODULES_END depend of the fixmap size. That was done when the cpu
entry area moved into the fixmap, but now that we have a separate
map space for that this is causing more issues than it solves.
- Use the proper cache flush methods for the debugstore buffers as
they are mapped/unmapped during runtime and not statically mapped
at boot time like the rest of the cpu entry area.
- Make the map layout of the cpu_entry_area consistent for 4 and 5
level paging and fix the KASLR vaddr_end wreckage.
- Use PER_CPU_EXPORT for per cpu variable and while at it unbreak
nvidia gfx drivers by dropping the GPL export. The subject line of
the commit tells it the other way around, but I noticed that too
late.
- Fix the ASM alternative macros so they can be used in the middle of
an inline asm block.
- Rename the BUG_CPU_INSECURE flag to BUG_CPU_MELTDOWN so the attack
vector is properly identified. The Spectre mitigations will come
with their own bug bits later"
* 'x86-pti-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/pti: Rename BUG_CPU_INSECURE to BUG_CPU_MELTDOWN
x86/alternatives: Add missing '\n' at end of ALTERNATIVE inline asm
x86/tlb: Drop the _GPL from the cpu_tlbstate export
x86/events/intel/ds: Use the proper cache flush method for mapping ds buffers
x86/kaslr: Fix the vaddr_end mess
x86/mm: Map cpu_entry_area at the same place on 4/5 level
x86/mm: Set MODULES_END to 0xffffffffff000000
|
|
Pull EFI updates from Thomas Gleixner:
- A fix for a add_efi_memmap parameter regression which ensures that
the parameter is parsed before it is used.
- Reinstate the virtual capsule mapping as the cached copy turned out
to break Quark and other things
- Remove Matt Fleming as EFI co-maintainer. He stepped back a few days
ago. Thanks Matt for all your great work!
* 'efi-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
MAINTAINERS: Remove Matt Fleming as EFI co-maintainer
efi/capsule-loader: Reinstate virtual capsule mapping
x86/efi: Fix kernel param add_efi_memmap regression
|
|
Pull s390 fixes from Martin Schwidefsky:
"Four bug fixes"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
s390/dasd: fix wrongly assigned configuration data
s390: fix preemption race in disable_sacf_uaccess
s390/sclp: disable FORTIFY_SOURCE for early sclp code
s390/pci: handle insufficient resources during dma tlb flush
|
|
Pull xen fix from Juergen Gross:
"One minor fix adjusting the kmalloc flags in the new pvcalls driver
added in rc1"
* tag 'for-linus-4.15-rc7-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip:
xen/pvcalls: use GFP_ATOMIC under spin lock
|
Mark Brown
Vinod Koul
Pierre-Louis Bossart
John Keeping
Keyon Jie
Christophe JAILLET
Jeremy Cline
Linus Torvalds
Jacek Anaszewski
Boris Brezillon
Radim Krčmář
Helge Deller
John Johansen