| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Rationale:
Reduces attack surface on kernel devs opening the links for MITM
as HTTPS traffic is much harder to manipulate.
Signed-off-by: Alexander A. Klimov <grandmaster@al2klimov.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Link: http://lkml.kernel.org/r/20200726120752.16768-1-grandmaster@al2klimov.de
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Originally kthread_create_on_cpu() parked and woke up the new thread.
However, since commit a65d40961dc7 ("kthread/smpboot: do not park in
kthread_create_on_cpu()") this is no longer the case. This patch removes
the comment that has been left behind and is now incorrect / stale.
Fixes: a65d40961dc7 ("kthread/smpboot: do not park in kthread_create_on_cpu()")
Signed-off-by: Ilias Stamatis <stamatis.iliass@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Link: http://lkml.kernel.org/r/20200611135920.240551-1-stamatis.iliass@gmail.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
For SMP systems using IPI based TLB invalidation, looking at
current->active_mm is entirely reasonable. This then presents the
following race condition:
CPU0 CPU1
flush_tlb_mm(mm) use_mm(mm)
<send-IPI>
tsk->active_mm = mm;
<IPI>
if (tsk->active_mm == mm)
// flush TLBs
</IPI>
switch_mm(old_mm,mm,tsk);
Where it is possible the IPI flushed the TLBs for @old_mm, not @mm,
because the IPI lands before we actually switched.
Avoid this by disabling IRQs across changing ->active_mm and
switch_mm().
Of the (SMP) architectures that have IPI based TLB invalidate:
Alpha - checks active_mm
ARC - ASID specific
IA64 - checks active_mm
MIPS - ASID specific flush
OpenRISC - shoots down world
PARISC - shoots down world
SH - ASID specific
SPARC - ASID specific
x86 - N/A
xtensa - checks active_mm
So at the very least Alpha, IA64 and Xtensa are suspect.
On top of this, for scheduler consistency we need at least preemption
disabled across changing tsk->mm and doing switch_mm(), which is
currently provided by task_lock(), but that's not sufficient for
PREEMPT_RT.
[akpm@linux-foundation.org: add comment]
Reported-by: Andy Lutomirski <luto@amacapital.net>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Kees Cook <keescook@chromium.org>
Cc: Jann Horn <jannh@google.com>
Cc: Will Deacon <will@kernel.org>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: <stable@vger.kernel.org>
Link: http://lkml.kernel.org/r/20200721154106.GE10769@hirez.programming.kicks-ass.net
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Especially with memory hotplug, we can have offline sections (with a
garbage memmap) and overlapping zones. We have to make sure to only touch
initialized memmaps (online sections managed by the buddy) and that the
zone matches, to not move pages between zones.
To test if this can actually happen, I added a simple
BUG_ON(page_zone(page_i) != page_zone(page_j));
right before the swap. When hotplugging a 256M DIMM to a 4G x86-64 VM and
onlining the first memory block "online_movable" and the second memory
block "online_kernel", it will trigger the BUG, as both zones (NORMAL and
MOVABLE) overlap.
This might result in all kinds of weird situations (e.g., double
allocations, list corruptions, unmovable allocations ending up in the
movable zone).
Fixes: e900a918b098 ("mm: shuffle initial free memory to improve memory-side-cache utilization")
Signed-off-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Wei Yang <richard.weiyang@linux.alibaba.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Acked-by: Dan Williams <dan.j.williams@intel.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Huang Ying <ying.huang@intel.com>
Cc: Wei Yang <richard.weiyang@gmail.com>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: <stable@vger.kernel.org> [5.2+]
Link: http://lkml.kernel.org/r/20200624094741.9918-2-david@redhat.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
On x86_64, when CONFIG_MMU_NOTIFIER is not set/enabled, there is a
compiler error:
mm/migrate.c: In function 'migrate_vma_collect':
mm/migrate.c:2481:7: error: 'struct mmu_notifier_range' has no member named 'migrate_pgmap_owner'
range.migrate_pgmap_owner = migrate->pgmap_owner;
^
Fixes: 998427b3ad2c ("mm/notifier: add migration invalidation type")
Reported-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Ralph Campbell <rcampbell@nvidia.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Tested-by: Randy Dunlap <rdunlap@infradead.org>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Jerome Glisse <jglisse@redhat.com>
Cc: John Hubbard <jhubbard@nvidia.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: "Jason Gunthorpe" <jgg@mellanox.com>
Link: http://lkml.kernel.org/r/20200806193353.7124-1-rcampbell@nvidia.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Pull tty/serial updates from Greg KH:
"Here is the large set of TTY and Serial driver patches for 5.9-rc1.
Lots of bugfixes in here, thanks to syzbot fuzzing for serial and vt
and console code.
Other highlights include:
- much needed vt/vc code cleanup from Jiri Slaby
- 8250 driver fixes and additions
- various serial driver updates and feature enhancements
- locking cleanup for serial/console initializations
- other minor cleanups
All of these have been in linux-next with no reported issues"
* tag 'tty-5.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (90 commits)
MAINTAINERS: enlist Greg formally for console stuff
vgacon: Fix for missing check in scrollback handling
Revert "serial: 8250: Let serial core initialise spin lock"
serial: 8250: Let serial core initialise spin lock
tty: keyboard, do not speculate on func_table index
serial: stm32: Add RS485 RTS GPIO control
serial: 8250_dw: Fix common clocks usage race condition
serial: 8250_dw: Pass the same rate to the clk round and set rate methods
serial: 8250_dw: Simplify the ref clock rate setting procedure
serial: 8250: Add 8250 port clock update method
tty: serial: imx: add imx earlycon driver
tty: serial: imx: enable imx serial console port as module
tty/synclink: remove leftover bits of non-PCI card support
tty: Use the preferred form for passing the size of a structure type
tty: Fix identation issues in struct serial_struct32
tty: Avoid the use of one-element arrays
serial: msm_serial: add sparse context annotation
serial: pmac_zilog: add sparse context annotation
newport_con: vc_color is now in state
serial: imx: use hrtimers for rs485 delays
...
|
|
Pull staging/IIO driver updates from Greg KH:
"Here is the large set of Staging and IIO driver patches for 5.9-rc1.
Lots of churn here, but overall the size increase in lines added is
small, while adding a load of new IIO drivers.
Major things in here:
- lots and lots of IIO new drivers and frameworks added
- IIO driver fixes and updates
- lots of tiny coding style cleanups for staging drivers
- vc04_services major reworks and cleanups
We had 3 set of drivers move out of staging in this round as well:
- wilc1000 wireless driver moved out of staging
- speakup moved out of staging
- most USB driver moved out of staging
Full details are in the shortlog.
All of these have been in linux-next with no reported issues. The last
few changes here were to resolve reported linux-next issues, and they
seem to have resolved the problems"
* tag 'staging-5.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: (428 commits)
staging: most: fix up movement of USB driver
staging: rts5208: clear alignment style issues
staging: r8188eu: replace rtw_netdev_priv define with inline function
staging: netlogic: clear alignment style issues
staging: android: ashmem: Fix lockdep warning for write operation
drivers: most: add USB adapter driver
staging: most: Use %pM format specifier for MAC addresses
staging: ks7010: Use %pM format specifier for MAC addresses
staging: qlge: qlge_dbg: removed comment repition
staging: wfx: Use flex_array_size() helper in memcpy()
staging: rtl8723bs: Align macro definitions
staging: rtl8723bs: Clean up function declations
staging: rtl8723bs: Fix coding style errors
drivers: staging: audio: Fix the missing header file for helper file
staging: greybus: audio: Enable GB codec, audio module compilation.
staging: greybus: audio: Add helper APIs for dynamic audio modules
staging: greybus: audio: Resolve compilation error in topology parser
staging: greybus: audio: Resolve compilation errors for GB codec module
staging: greybus: audio: Maintain jack list within GB Audio module
staging: greybus: audio: Update snd_jack FW usage as per new APIs
...
|
|
Pull sound updates from Takashi Iwai:
"This became wide and scattered updates all over the sound tree as
diffstat shows: lots of (still ongoing) refactoring works in ASoC,
fixes and cleanups caught by static analysis, inclusive term
conversions as well as lots of new drivers. Below are highlights:
ASoC core:
- API cleanups and conversions to the unified mute_stream() call
- Simplify I/O helper functions
- Use helper macros to retrieve RTD from substreams
ASoC drivers:
- Lots of fixes and cleanups in Intel ASoC drivers
- Lots of new stuff: Freescale MQS and i.MX6sx, Intel KeemBay I2S,
Maxim MAX98360A and MAX98373 SoundWire, various Mediatek boards,
nVidia Tegra 186 and 210, RealTek RL6231, Samsung Midas and Aries
boards, TI J721e EVM
ALSA core:
- Minor code refacotring for SG-buffer handling
HD-audio:
- Generalization of mute-LED handling with LED classdev
- Intel silent stream support for HDMI
- Device-specific fixes: CA0132, Loongson-3
Others:
- Usual USB- and HD-audio quirks for various devices
- Fixes for echoaudio DMA position handling
- Various documents and trivial fixes for sparse warnings
- Conversion to adopt inclusive terms"
* tag 'sound-5.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (479 commits)
ALSA: pci: delete repeated words in comments
ALSA: isa: delete repeated words in comments
ALSA: hda/tegra: Add 100us dma stop delay
ALSA: hda: Add dma stop delay variable
ASoC: hda/tegra: Set buffer alignment to 128 bytes
ALSA: seq: oss: Serialize ioctls
ALSA: hda/hdmi: Add quirk to force connectivity
ALSA: usb-audio: add startech usb audio dock name
ALSA: usb-audio: Add support for Lenovo ThinkStation P620
Revert "ALSA: hda: call runtime_allow() for all hda controllers"
ALSA: hda/ca0132 - Fix AE-5 microphone selection commands.
ALSA: hda/ca0132 - Add new quirk ID for Recon3D.
ALSA: hda/ca0132 - Fix ZxR Headphone gain control get value.
ALSA: hda/realtek: Add alc269/alc662 pin-tables for Loongson-3 laptops
ALSA: docs: fix typo
ALSA: doc: use correct config variable name
ASoC: core: Two step component registration
ASoC: core: Simplify snd_soc_component_initialize declaration
ASoC: core: Relocate and expose snd_soc_component_initialize
ASoC: sh: Replace 'select' DMADEVICES 'with depends on'
...
|
|
Pull KVM updates from Paolo Bonzini:
"s390:
- implement diag318
x86:
- Report last CPU for debugging
- Emulate smaller MAXPHYADDR in the guest than in the host
- .noinstr and tracing fixes from Thomas
- nested SVM page table switching optimization and fixes
Generic:
- Unify shadow MMU cache data structures across architectures"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (127 commits)
KVM: SVM: Fix sev_pin_memory() error handling
KVM: LAPIC: Set the TDCR settable bits
KVM: x86: Specify max TDP level via kvm_configure_mmu()
KVM: x86/mmu: Rename max_page_level to max_huge_page_level
KVM: x86: Dynamically calculate TDP level from max level and MAXPHYADDR
KVM: VXM: Remove temporary WARN on expected vs. actual EPTP level mismatch
KVM: x86: Pull the PGD's level from the MMU instead of recalculating it
KVM: VMX: Make vmx_load_mmu_pgd() static
KVM: x86/mmu: Add separate helper for shadow NPT root page role calc
KVM: VMX: Drop a duplicate declaration of construct_eptp()
KVM: nSVM: Correctly set the shadow NPT root level in its MMU role
KVM: Using macros instead of magic values
MIPS: KVM: Fix build error caused by 'kvm_run' cleanup
KVM: nSVM: remove nonsensical EXITINFO1 adjustment on nested NPF
KVM: x86: Add a capability for GUEST_MAXPHYADDR < HOST_MAXPHYADDR support
KVM: VMX: optimize #PF injection when MAXPHYADDR does not match
KVM: VMX: Add guest physical address check in EPT violation and misconfig
KVM: VMX: introduce vmx_need_pf_intercept
KVM: x86: update exception bitmap on CPUID changes
KVM: x86: rename update_bp_intercept to update_exception_bitmap
...
|
|
This reverts commit 8bb9bf242d1fee925636353807c511d54fde8986.
It seems the vmalloc page tables aren't always preallocated in all
situations, because Jason Donenfeld reports an oops with this commit:
BUG: unable to handle page fault for address: ffffe8ffffd00608
#PF: supervisor read access in kernel mode
#PF: error_code(0x0000) - not-present page
PGD 0 P4D 0
Oops: 0000 [#1] PREEMPT SMP
CPU: 2 PID: 22 Comm: kworker/2:0 Not tainted 5.8.0+ #154
RIP: process_one_work+0x2c/0x2d0
Code: 41 56 41 55 41 54 55 48 89 f5 53 48 89 fb 48 83 ec 08 48 8b 06 4c 8b 67 40 49 89 c6 45 30 f6 a8 04 b8 00 00 00 00 4c 0f 44 f0 <49> 8b 46 08 44 8b a8 00 01 05
Call Trace:
worker_thread+0x4b/0x3b0
? rescuer_thread+0x360/0x360
kthread+0x116/0x140
? __kthread_create_worker+0x110/0x110
ret_from_fork+0x1f/0x30
CR2: ffffe8ffffd00608
and that page fault address is right in that vmalloc space, and we
clearly don't have a PGD/P4D entry for it.
Looking at the "Code:" line, the actual fault seems to come from the
'pwq->wq' dereference at the top of the process_one_work() function:
struct pool_workqueue *pwq = get_work_pwq(work);
struct worker_pool *pool = worker->pool;
bool cpu_intensive = pwq->wq->flags & WQ_CPU_INTENSIVE;
so 'struct pool_workqueue *pwq' is the allocation that hasn't been
synchronized across CPUs.
Just revert for now, while Joerg figures out the cause.
Reported-and-bisected-by: Jason A. Donenfeld <Jason@zx2c4.com>
Acked-by: Ingo Molnar <mingo@kernel.org>
Acked-by: Joerg Roedel <jroedel@suse.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Pull sched/fifo updates from Ingo Molnar:
"This adds the sched_set_fifo*() encapsulation APIs to remove static
priority level knowledge from non-scheduler code.
The three APIs for non-scheduler code to set SCHED_FIFO are:
- sched_set_fifo()
- sched_set_fifo_low()
- sched_set_normal()
These are two FIFO priority levels: default (high), and a 'low'
priority level, plus sched_set_normal() to set the policy back to
non-SCHED_FIFO.
Since the changes affect a lot of non-scheduler code, we kept this in
a separate tree"
* tag 'sched-fifo-2020-08-04' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (24 commits)
sched,tracing: Convert to sched_set_fifo()
sched: Remove sched_set_*() return value
sched: Remove sched_setscheduler*() EXPORTs
sched,psi: Convert to sched_set_fifo_low()
sched,rcutorture: Convert to sched_set_fifo_low()
sched,rcuperf: Convert to sched_set_fifo_low()
sched,locktorture: Convert to sched_set_fifo()
sched,irq: Convert to sched_set_fifo()
sched,watchdog: Convert to sched_set_fifo()
sched,serial: Convert to sched_set_fifo()
sched,powerclamp: Convert to sched_set_fifo()
sched,ion: Convert to sched_set_normal()
sched,powercap: Convert to sched_set_fifo*()
sched,spi: Convert to sched_set_fifo*()
sched,mmc: Convert to sched_set_fifo*()
sched,ivtv: Convert to sched_set_fifo*()
sched,drm/scheduler: Convert to sched_set_fifo*()
sched,msm: Convert to sched_set_fifo*()
sched,psci: Convert to sched_set_fifo*()
sched,drbd: Convert to sched_set_fifo*()
...
|
|
Pull integrity updates from Mimi Zohar:
"The nicest change is the IMA policy rule checking. The other changes
include allowing the kexec boot cmdline line measure policy rules to
be defined in terms of the inode associated with the kexec kernel
image, making the IMA_APPRAISE_BOOTPARAM, which governs the IMA
appraise mode (log, fix, enforce), a runtime decision based on the
secure boot mode of the system, and including errno in the audit log"
* tag 'integrity-v5.9' of git://git.kernel.org/pub/scm/linux/kernel/git/zohar/linux-integrity:
integrity: remove redundant initialization of variable ret
ima: move APPRAISE_BOOTPARAM dependency on ARCH_POLICY to runtime
ima: AppArmor satisfies the audit rule requirements
ima: Rename internal filter rule functions
ima: Support additional conditionals in the KEXEC_CMDLINE hook function
ima: Use the common function to detect LSM conditionals in a rule
ima: Move comprehensive rule validation checks out of the token parser
ima: Use correct type for the args_p member of ima_rule_entry.lsm elements
ima: Shallow copy the args_p member of ima_rule_entry.lsm elements
ima: Fail rule parsing when appraise_flag=blacklist is unsupportable
ima: Fail rule parsing when the KEY_CHECK hook is combined with an invalid cond
ima: Fail rule parsing when the KEXEC_CMDLINE hook is combined with an invalid cond
ima: Fail rule parsing when buffer hook functions have an invalid action
ima: Free the entire rule if it fails to parse
ima: Free the entire rule when deleting a list of rules
ima: Have the LSM free its audit rule
IMA: Add audit log for failure conditions
integrity: Add errno field in audit message
|
|
Pull coccinelle updates from Julia Lawall:
"New semantic patches and semantic patch improvements from Denis
Efremov"
* 'for-5.9' of git://git.kernel.org/pub/scm/linux/kernel/git/jlawall/linux:
coccinelle: api: filter out memdup_user definitions
coccinelle: api: extend memdup_user rule with vmemdup_user()
coccinelle: api: extend memdup_user transformation with GFP_USER
coccinelle: api: add kzfree script
coccinelle: misc: add array_size_dup script to detect missed overflow checks
coccinelle: api/kstrdup: fix coccinelle position
coccinelle: api: add device_attr_show script
|
|
Pull livepatching updates from Petr Mladek:
"Improvements and cleanups of livepatching selftests"
* tag 'livepatching-for-5.9' of git://git.kernel.org/pub/scm/linux/kernel/git/livepatching/livepatching:
selftests/livepatch: adopt to newer sysctl error format
selftests/livepatch: Use "comm" instead of "diff" for dmesg
selftests/livepatch: add test delimiter to dmesg
selftests/livepatch: refine dmesg 'taints' in dmesg comparison
selftests/livepatch: Don't clear dmesg when running tests
selftests/livepatch: fix mem leaks in test-klp-shadow-vars
selftests/livepatch: more verification in test-klp-shadow-vars
selftests/livepatch: rework test-klp-shadow-vars
selftests/livepatch: simplify test-klp-callbacks busy target tests
|
|
Pull smack updates from Casey Schaufler:
"Minor fixes to Smack for the v5.9 release.
All were found by automated checkers and have straightforward
resolution"
* tag 'Smack-for-5.9' of git://github.com/cschaufler/smack-next:
Smack: prevent underflow in smk_set_cipso()
Smack: fix another vsscanf out of bounds
Smack: fix use-after-free in smk_write_relabel_self()
|
|
Pull MIPS upates from Thomas Bogendoerfer:
- improvements for Loongson64
- extended ingenic support
- removal of not maintained paravirt system type
- cleanups and fixes
* tag 'mips_5.9' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux: (81 commits)
MIPS: SGI-IP27: always enable NUMA in Kconfig
MAINTAINERS: Update KVM/MIPS maintainers
MIPS: Update default config file for Loongson-3
MIPS: KVM: Add kvm guest support for Loongson-3
dt-bindings: mips: Document Loongson kvm guest board
MIPS: handle Loongson-specific GSExc exception
MIPS: add definitions for Loongson-specific CP0.Diag1 register
MIPS: only register FTLBPar exception handler for supported models
MIPS: ingenic: Hardcode mem size for qi,lb60 board
MIPS: DTS: ingenic/qi,lb60: Add model and memory node
MIPS: ingenic: Use fw_passed_dtb even if CONFIG_BUILTIN_DTB
MIPS: head.S: Init fw_passed_dtb to builtin DTB
of: address: Fix parser address/size cells initialization
of_address: Guard of_bus_pci_get_flags with CONFIG_PCI
MIPS: DTS: Fix number of msi vectors for Loongson64G
MIPS: Loongson64: Add ISA node for LS7A PCH
MIPS: Loongson64: DTS: Fix ISA and PCI I/O ranges for RS780E PCH
MIPS: Loongson64: Enlarge IO_SPACE_LIMIT
MIPS: Loongson64: Process ISA Node in DeviceTree
of_address: Add bus type match for pci ranges parser
...
|
|
Pull ARM updates from Russell King:
- add arch/arm/Kbuild from Masahiro Yamada.
- simplify act_mm macro, since it contains an open-coded
get_thread_info.
- VFP updates for Clang from Stefan Agner.
- Fix unwinder for Clang from Nathan Huckleberry.
- Remove unused it8152 PCI host controller, used by the removed cm-x2xx
platforms from Mike Rapoport.
- Further explanation of __range_ok().
- Remove kimage_voffset that isn't used anymore from Marc Zyngier.
- Drop ancient Thumb-2 workaround for old binutils from Ard Biesheuvel.
- Documentation cleanup for mach-* from Pete Zaitcev.
* tag 'for-linus' of git://git.armlinux.org.uk/~rmk/linux-arm:
ARM: 8996/1: Documentation/Clean up the description of mach-<class>
ARM: 8995/1: drop Thumb-2 workaround for ancient binutils
ARM: 8994/1: mm: drop kimage_voffset which was only used by KVM
ARM: uaccess: add further explanation of __range_ok()
ARM: 8993/1: remove it8152 PCI controller driver
ARM: 8992/1: Fix unwind_frame for clang-built kernels
ARM: 8991/1: use VFP assembler mnemonics if available
ARM: 8990/1: use VFP assembler mnemonics in register load/store macros
ARM: 8989/1: use .fpu assembler directives instead of assembler arguments
ARM: 8982/1: mm: Simplify act_mm macro
ARM: 8981/1: add arch/arm/Kbuild
|
|
Pull arch/csky updates from Guo Ren:
"New features:
- seccomp-filter
- err-injection
- top-down&random mmap-layout
- irq_work
- show_ipi
- context-tracking
Fixes & Optimizations:
- kprobe_on_ftrace
- optimize panic print"
* tag 'csky-for-linus-5.9-rc1' of https://github.com/c-sky/csky-linux:
csky: Add context tracking support
csky: Add arch_show_interrupts for IPI interrupts
csky: Add irq_work support
csky: Fixup warning by EXPORT_SYMBOL(kmap)
csky: Set CONFIG_NR_CPU 4 as default
csky: Use top-down mmap layout
csky: Optimize the trap processing flow
csky: Add support for function error injection
csky: Fixup kprobes handler couldn't change pc
csky: Fixup duplicated restore sp in RESTORE_REGS_FTRACE
csky: Add cpu feature register hint for smp
csky: Add SECCOMP_FILTER supported
csky: remove unusued thread_saved_pc and *_segments functions/macros
|
|
Pull Xtensa updates from Max Filippov:
- add syscall audit support
- add seccomp filter support
- clean up make rules under arch/xtensa/boot
- fix state management for exclusive access opcodes
- fix build with PMU enabled
* tag 'xtensa-20200805' of git://github.com/jcmvbkbc/linux-xtensa:
xtensa: add missing exclusive access state management
xtensa: fix xtensa_pmu_setup prototype
xtensa: add boot subdirectories build artifacts to 'targets'
xtensa: add uImage and xipImage to targets
xtensa: move vmlinux.bin[.gz] to boot subdirectory
xtensa: initialize_mmu.h: fix a duplicated word
selftests/seccomp: add xtensa support
xtensa: add seccomp support
xtensa: expose syscall through user_pt_regs
xtensa: add audit support
|
|
Pull hyperv updates from Wei Liu:
- A patch series from Andrea to improve vmbus code
- Two clean-up patches from Alexander and Randy
* tag 'hyperv-next-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux:
hyperv: hyperv.h: drop a duplicated word
tools: hv: change http to https in hv_kvp_daemon.c
Drivers: hv: vmbus: Remove the lock field from the vmbus_channel struct
scsi: storvsc: Introduce the per-storvsc_device spinlock
Drivers: hv: vmbus: Remove unnecessary channel->lock critical sections (sc_list updaters)
Drivers: hv: vmbus: Use channel_mutex in channel_vp_mapping_show()
Drivers: hv: vmbus: Remove unnecessary channel->lock critical sections (sc_list readers)
Drivers: hv: vmbus: Replace cpumask_test_cpu(, cpu_online_mask) with cpu_online()
Drivers: hv: vmbus: Remove the numa_node field from the vmbus_channel struct
Drivers: hv: vmbus: Remove the target_vp field from the vmbus_channel struct
|
|
Drop duplicated words in sound/pci/.
{and, the, at}
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Link: https://lore.kernel.org/r/20200806021926.32418-1-rdunlap@infradead.org
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
Drop duplicated words in sound/isa/.
{be, bit}
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Link: https://lore.kernel.org/r/20200806021916.32369-1-rdunlap@infradead.org
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
Pull networking updates from David Miller:
1) Support 6Ghz band in ath11k driver, from Rajkumar Manoharan.
2) Support UDP segmentation in code TSO code, from Eric Dumazet.
3) Allow flashing different flash images in cxgb4 driver, from Vishal
Kulkarni.
4) Add drop frames counter and flow status to tc flower offloading,
from Po Liu.
5) Support n-tuple filters in cxgb4, from Vishal Kulkarni.
6) Various new indirect call avoidance, from Eric Dumazet and Brian
Vazquez.
7) Fix BPF verifier failures on 32-bit pointer arithmetic, from
Yonghong Song.
8) Support querying and setting hardware address of a port function via
devlink, use this in mlx5, from Parav Pandit.
9) Support hw ipsec offload on bonding slaves, from Jarod Wilson.
10) Switch qca8k driver over to phylink, from Jonathan McDowell.
11) In bpftool, show list of processes holding BPF FD references to
maps, programs, links, and btf objects. From Andrii Nakryiko.
12) Several conversions over to generic power management, from Vaibhav
Gupta.
13) Add support for SO_KEEPALIVE et al. to bpf_setsockopt(), from Dmitry
Yakunin.
14) Various https url conversions, from Alexander A. Klimov.
15) Timestamping and PHC support for mscc PHY driver, from Antoine
Tenart.
16) Support bpf iterating over tcp and udp sockets, from Yonghong Song.
17) Support 5GBASE-T i40e NICs, from Aleksandr Loktionov.
18) Add kTLS RX HW offload support to mlx5e, from Tariq Toukan.
19) Fix the ->ndo_start_xmit() return type to be netdev_tx_t in several
drivers. From Luc Van Oostenryck.
20) XDP support for xen-netfront, from Denis Kirjanov.
21) Support receive buffer autotuning in MPTCP, from Florian Westphal.
22) Support EF100 chip in sfc driver, from Edward Cree.
23) Add XDP support to mvpp2 driver, from Matteo Croce.
24) Support MPTCP in sock_diag, from Paolo Abeni.
25) Commonize UDP tunnel offloading code by creating udp_tunnel_nic
infrastructure, from Jakub Kicinski.
26) Several pci_ --> dma_ API conversions, from Christophe JAILLET.
27) Add FLOW_ACTION_POLICE support to mlxsw, from Ido Schimmel.
28) Add SK_LOOKUP bpf program type, from Jakub Sitnicki.
29) Refactor a lot of networking socket option handling code in order to
avoid set_fs() calls, from Christoph Hellwig.
30) Add rfc4884 support to icmp code, from Willem de Bruijn.
31) Support TBF offload in dpaa2-eth driver, from Ioana Ciornei.
32) Support XDP_REDIRECT in qede driver, from Alexander Lobakin.
33) Support PCI relaxed ordering in mlx5 driver, from Aya Levin.
34) Support TCP syncookies in MPTCP, from Flowian Westphal.
35) Fix several tricky cases of PMTU handling wrt. briding, from Stefano
Brivio.
* git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (2056 commits)
net: thunderx: initialize VF's mailbox mutex before first usage
usb: hso: remove bogus check for EINPROGRESS
usb: hso: no complaint about kmalloc failure
hso: fix bailout in error case of probe
ip_tunnel_core: Fix build for archs without _HAVE_ARCH_IPV6_CSUM
selftests/net: relax cpu affinity requirement in msg_zerocopy test
mptcp: be careful on subflow creation
selftests: rtnetlink: make kci_test_encap() return sub-test result
selftests: rtnetlink: correct the final return value for the test
net: dsa: sja1105: use detected device id instead of DT one on mismatch
tipc: set ub->ifindex for local ipv6 address
ipv6: add ipv6_dev_find()
net: openvswitch: silence suspicious RCU usage warning
Revert "vxlan: fix tos value before xmit"
ptp: only allow phase values lower than 1 period
farsync: switch from 'pci_' to 'dma_' API
wan: wanxl: switch from 'pci_' to 'dma_' API
hv_netvsc: do not use VF device if link is down
dpaa2-eth: Fix passing zero to 'PTR_ERR' warning
net: macb: Properly handle phylink on at91sam9x
...
|
|
Pull drm updates from Dave Airlie:
"New xilinx displayport driver, AMD support for two new GPUs (more
header files), i915 initial support for RocketLake and some work on
their DG1 (discrete chip).
The core also grew some lockdep annotations to try and constrain what
drivers do with dma-fences, and added some documentation on why the
idea of indefinite fences doesn't work.
The long list is below.
I do have some fixes trees outstanding, but I'll follow up with those
later.
core:
- add user def flag to cmd line modes
- dma_fence_wait added might_sleep
- dma-fence lockdep annotations
- indefinite fences are bad documentation
- gem CMA functions used in more drivers
- struct mutex removal
- more drm_ debug macro usage
- set/drop master api fixes
- fix for drm/mm hole size comparison
- drm/mm remove invalid entry optimization
- optimise drm/mm hole handling
- VRR debugfs added
- uncompressed AFBC modifier support
- multiple display id blocks in EDID
- multiple driver sg handling fixes
- __drm_atomic_helper_crtc_reset in all drivers
- managed vram helpers
ttm:
- ttm_mem_reg handling cleanup
- remove bo offset field
- drop CMA memtype flag
- drop mappable flag
xilinx:
- New Xilinx ZynqMP DisplayPort Subsystem driver
nouveau:
- add CRC support
- start using NVIDIA published class header files
- convert all push buffer emission to new macros
- Proper push buffer space management for EVO/NVD channels.
- firmware loading fixes
- 2MiB system memory pages support on Pascal and newer
vkms:
- larger cursor support
i915:
- Rocketlake platform enablement
- Early DG1 enablement
- Numerous GEM refactorings
- DP MST fixes
- FBC, PSR, Cursor, Color, Gamma fixes
- TGL, RKL, EHL workaround updates
- TGL 8K display support fixes
- SDVO/HDMI/DVI fixes
amdgpu:
- Initial support for Sienna Cichlid GPU
- Initial support for Navy Flounder GPU
- SI UVD/VCE support
- expose rotation property
- Add support for unique id on Arcturus
- Enable runtime PM on vega10 boards that support BACO
- Skip BAR resizing if the bios already did id
- Major swSMU code cleanup
- Fixes for DCN bandwidth calculations
amdkfd:
- Track SDMA usage per process
- SMI events interface
radeon:
- Default to on chip GART for AGP boards on all arches
- Runtime PM reference count fixes
msm:
- headers regenerated causing churn
- a650/a640 display and GPU enablement
- dpu dither support for 6bpc panels
- dpu cursor fix
- dsi/mdp5 enablement for sdm630/sdm636/sdm66
tegra:
- video capture prep support
- reflection support
mediatek:
- convert mtk_dsi to bridge API
meson:
- FBC support
sun4i:
- iommu support
rockchip:
- register locking fix
- per-pixel alpha support PX30 VOP
mgag200:
- ported to simple and shmem helpers
- device init cleanups
- use managed pci functions
- dropped hw cursor support
ast:
- use managed pci functions
- use managed VRAM helpers
- rework cursor support
malidp:
- dev_groups support
hibmc:
- refactor hibmc_drv_vdac:
vc4:
- create TXP CRTC
imx:
- error path fixes and cleanups
etnaviv:
- clock handling and error handling cleanups
- use pin_user_pages"
* tag 'drm-next-2020-08-06' of git://anongit.freedesktop.org/drm/drm: (1747 commits)
drm/msm: use kthread_create_worker instead of kthread_run
drm/msm/mdp5: Add MDP5 configuration for SDM636/660
drm/msm/dsi: Add DSI configuration for SDM660
drm/msm/mdp5: Add MDP5 configuration for SDM630
drm/msm/dsi: Add phy configuration for SDM630/636/660
drm/msm/a6xx: add A640/A650 hwcg
drm/msm/a6xx: hwcg tables in gpulist
drm/msm/dpu: add SM8250 to hw catalog
drm/msm/dpu: add SM8150 to hw catalog
drm/msm/dpu: intf timing path for displayport
drm/msm/dpu: set missing flush bits for INTF_2 and INTF_3
drm/msm/dpu: don't use INTF_INPUT_CTRL feature on sdm845
drm/msm/dpu: move some sspp caps to dpu_caps
drm/msm/dpu: update UBWC config for sm8150 and sm8250
drm/msm/dpu: use right setup_blend_config for sm8150 and sm8250
drm/msm/a6xx: set ubwc config for A640 and A650
drm/msm/adreno: un-open-code some packets
drm/msm: sync generated headers
drm/msm/a6xx: add build_bw_table for A640/A650
drm/msm/a6xx: fix crashstate capture for A650
...
|
|
Pull LED updates from Pavel Machek:
"Okay, so... this one is interesting. RGB LEDs are very common, and we
need to have some kind of support for them. Multicolor is for
arbitrary set of LEDs in one package, RGB is for LEDs that can produce
full range of colors. We do not have real multicolor LED that is not
RGB in the pipeline, so that one is disabled for now.
You can expect this saga to continue with next pull requests"
* tag 'leds-5.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/pavel/linux-leds: (37 commits)
MAINTAINERS: Remove myself as LED subsystem maintainer
leds: disallow /sys/class/leds/*:multi:* for now
leds: add RGB color option, as that is different from multicolor.
Make LEDS_LP55XX_COMMON depend on I2C to fix build errors:
Documentation: ABI: leds-turris-omnia: document sysfs attribute
leds: initial support for Turris Omnia LEDs
dt-bindings: leds: add cznic,turris-omnia-leds binding
leds: pattern trigger -- check pattern for validity
leds: Replace HTTP links with HTTPS ones
leds: trigger: add support for LED-private device triggers
leds: lp5521: Add multicolor framework multicolor brightness support
leds: lp5523: Update the lp5523 code to add multicolor brightness function
leds: lp55xx: Add multicolor framework support to lp55xx
leds: lp55xx: Convert LED class registration to devm_*
dt-bindings: leds: Convert leds-lp55xx to yaml
leds: multicolor: Introduce a multicolor class definition
leds: Add multicolor ID to the color ID list
dt: bindings: Add multicolor class dt bindings documention
leds: lp5523: Fix various formatting issues in the code
leds: lp55xx: Fix file permissions to use DEVICE_ATTR macros
...
|
|
A VF's mailbox mutex is not getting initialized by nicvf_probe() until after
it is first used. And such usage is resulting in...
[ 28.270927] ------------[ cut here ]------------
[ 28.270934] DEBUG_LOCKS_WARN_ON(lock->magic != lock)
[ 28.270980] WARNING: CPU: 9 PID: 675 at kernel/locking/mutex.c:938 __mutex_lock+0xdac/0x12f0
[ 28.270985] Modules linked in: ast(+) nicvf(+) i2c_algo_bit drm_vram_helper drm_ttm_helper ttm nicpf(+) drm_kms_helper syscopyarea sysfillrect sysimgblt fb_sys_fops drm ixgbe(+) sg thunder_bgx mdio i2c_thunderx mdio_thunder thunder_xcv mdio_cavium dm_mirror dm_region_hash dm_log dm_mod
[ 28.271064] CPU: 9 PID: 675 Comm: systemd-udevd Not tainted 4.18.0+ #1
[ 28.271070] Hardware name: GIGABYTE R120-T34-00/MT30-GS2-00, BIOS F02 08/06/2019
[ 28.271078] pstate: 60000005 (nZCv daif -PAN -UAO)
[ 28.271086] pc : __mutex_lock+0xdac/0x12f0
[ 28.271092] lr : __mutex_lock+0xdac/0x12f0
[ 28.271097] sp : ffff800d42146fb0
[ 28.271103] x29: ffff800d42146fb0 x28: 0000000000000000
[ 28.271113] x27: ffff800d24361180 x26: dfff200000000000
[ 28.271122] x25: 0000000000000000 x24: 0000000000000002
[ 28.271132] x23: ffff20001597cc80 x22: ffff2000139e9848
[ 28.271141] x21: 0000000000000000 x20: 1ffff001a8428e0c
[ 28.271151] x19: ffff200015d5d000 x18: 1ffff001ae0f2184
[ 28.271160] x17: 0000000000000000 x16: 0000000000000000
[ 28.271170] x15: ffff800d70790c38 x14: ffff20001597c000
[ 28.271179] x13: ffff20001597cc80 x12: ffff040002b2f779
[ 28.271189] x11: 1fffe40002b2f778 x10: ffff040002b2f778
[ 28.271199] x9 : 0000000000000000 x8 : 00000000f1f1f1f1
[ 28.271208] x7 : 00000000f2f2f2f2 x6 : 0000000000000000
[ 28.271217] x5 : 1ffff001ae0f2186 x4 : 1fffe400027eb03c
[ 28.271227] x3 : dfff200000000000 x2 : ffff1001a8428dbe
[ 28.271237] x1 : c87fdfac7ea11d00 x0 : 0000000000000000
[ 28.271246] Call trace:
[ 28.271254] __mutex_lock+0xdac/0x12f0
[ 28.271261] mutex_lock_nested+0x3c/0x50
[ 28.271297] nicvf_send_msg_to_pf+0x40/0x3a0 [nicvf]
[ 28.271316] nicvf_register_misc_interrupt+0x20c/0x328 [nicvf]
[ 28.271334] nicvf_probe+0x508/0xda0 [nicvf]
[ 28.271344] local_pci_probe+0xc4/0x180
[ 28.271352] pci_device_probe+0x3ec/0x528
[ 28.271363] driver_probe_device+0x21c/0xb98
[ 28.271371] device_driver_attach+0xe8/0x120
[ 28.271379] __driver_attach+0xe0/0x2a0
[ 28.271386] bus_for_each_dev+0x118/0x190
[ 28.271394] driver_attach+0x48/0x60
[ 28.271401] bus_add_driver+0x328/0x558
[ 28.271409] driver_register+0x148/0x398
[ 28.271416] __pci_register_driver+0x14c/0x1b0
[ 28.271437] nicvf_init_module+0x54/0x10000 [nicvf]
[ 28.271447] do_one_initcall+0x18c/0xc18
[ 28.271457] do_init_module+0x18c/0x618
[ 28.271464] load_module+0x2bc0/0x4088
[ 28.271472] __se_sys_finit_module+0x110/0x188
[ 28.271479] __arm64_sys_finit_module+0x70/0xa0
[ 28.271490] el0_svc_handler+0x15c/0x380
[ 28.271496] el0_svc+0x8/0xc
[ 28.271502] irq event stamp: 52649
[ 28.271513] hardirqs last enabled at (52649): [<ffff200011b4d790>] _raw_spin_unlock_irqrestore+0xc0/0xd8
[ 28.271522] hardirqs last disabled at (52648): [<ffff200011b4d3c4>] _raw_spin_lock_irqsave+0x3c/0xf0
[ 28.271530] softirqs last enabled at (52330): [<ffff200010082af4>] __do_softirq+0xacc/0x117c
[ 28.271540] softirqs last disabled at (52313): [<ffff20001019b354>] irq_exit+0x3cc/0x500
[ 28.271545] ---[ end trace a9b90324c8a0d4ee ]---
This problem is resolved by moving the call to mutex_init() up earlier
in nicvf_probe().
Fixes: 609ea65c65a0 ("net: thunderx: add mutex to protect mailbox from concurrent calls for same VF")
Signed-off-by: Dean Nelson <dnelson@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Oliver Neukum says:
====================
misc bug fixes for the hso driver
1. Code reuse led to an unregistration of a net driver that has not been
registered
2. The kernel complains generically if kmalloc with GFP_KERNEL fails
3. A race that can lead to an URB that is in use being reused or
a use after free
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This check an inherent race. It opens a race where
an error code has already been set or cleared yet
the URB has not been given back. We cannot do
such an optimization and must unlink unconditionally.
Signed-off-by: Oliver Neukum <oneukum@suse.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
If this fails, kmalloc() will print a report including
a stack trace. There is no need for a separate complaint.
Signed-off-by: Oliver Neukum <oneukum@suse.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The driver tries to reuse code for disconnect in case
of a failed probe.
If resources need to be freed after an error in probe, the
netdev must not be freed because it has never been registered.
Fix it by telling the helper which path we are in.
Signed-off-by: Oliver Neukum <oneukum@suse.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
When a configuration has NUMA disabled and SGI_IP27 enabled, the build
fails:
CC kernel/bounds.s
CC arch/mips/kernel/asm-offsets.s
In file included from arch/mips/include/asm/topology.h:11,
from include/linux/topology.h:36,
from include/linux/gfp.h:9,
from include/linux/slab.h:15,
from include/linux/crypto.h:19,
from include/crypto/hash.h:11,
from include/linux/uio.h:10,
from include/linux/socket.h:8,
from include/linux/compat.h:15,
from arch/mips/kernel/asm-offsets.c:12:
include/linux/topology.h: In function 'numa_node_id':
arch/mips/include/asm/mach-ip27/topology.h:16:27: error: implicit declaration of function 'cputonasid'; did you mean 'cpu_vpe_id'? [-Werror=implicit-function-declaration]
#define cpu_to_node(cpu) (cputonasid(cpu))
^~~~~~~~~~
include/linux/topology.h:119:9: note: in expansion of macro 'cpu_to_node'
return cpu_to_node(raw_smp_processor_id());
^~~~~~~~~~~
include/linux/topology.h: In function 'cpu_cpu_mask':
arch/mips/include/asm/mach-ip27/topology.h:19:7: error: implicit declaration of function 'hub_data' [-Werror=implicit-function-declaration]
&hub_data(node)->h_cpus)
^~~~~~~~
include/linux/topology.h:210:9: note: in expansion of macro 'cpumask_of_node'
return cpumask_of_node(cpu_to_node(cpu));
^~~~~~~~~~~~~~~
arch/mips/include/asm/mach-ip27/topology.h:19:21: error: invalid type argument of '->' (have 'int')
&hub_data(node)->h_cpus)
^~
include/linux/topology.h:210:9: note: in expansion of macro 'cpumask_of_node'
return cpumask_of_node(cpu_to_node(cpu));
^~~~~~~~~~~~~~~
Before switch from discontigmem to sparsemem, there always was
CONFIG_NEED_MULTIPLE_NODES=y because it was selected by DISCONTIGMEM.
Without DISCONTIGMEM it is possible to have SPARSEMEM without NUMA for
SGI_IP27 and as many things there rely on custom node definition, the
build breaks.
As Thomas noted "... there are right now too many places in IP27 code,
which assumes NUMA enabled", the simplest solution would be to always
enable NUMA for SGI-IP27 builds.
Reported-by: kernel test robot <lkp@intel.com>
Fixes: 397dc00e249e ("mips: sgi-ip27: switch from DISCONTIGMEM to SPARSEMEM")
Cc: stable@vger.kernel.org
Signed-off-by: Mike Rapoport <rppt@linux.ibm.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
|
|
It don't have enough time for reviewing patches and thus don't
want to be listed as regular LED maintainer. Nonetheless I may still
give a review from time to time.
Signed-off-by: Jacek Anaszewski <jacek.anaszewski@gmail.com>
Signed-off-by: Pavel Machek <pavel@ucw.cz>
|
|
Pull hmm updates from Jason Gunthorpe:
"Ralph has been working on nouveau's use of hmm_range_fault() and
migrate_vma() which resulted in this small series. It adds reporting
of the page table order from hmm_range_fault() and some optimization
of migrate_vma():
- Report the size of the page table mapping out of hmm_range_fault().
This makes it easier to establish a large/huge/etc mapping in the
device's page table.
- Allow devices to ignore the invalidations during migration in cases
where the migration is not going to change pages.
For instance migrating pages to a device does not require the
device to invalidate pages already in the device.
- Update nouveau and hmm_tests to use the above"
* tag 'for-linus-hmm' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma:
mm/hmm/test: use the new migration invalidation
nouveau/svm: use the new migration invalidation
mm/notifier: add migration invalidation type
mm/migrate: add a flags parameter to migrate_vma
nouveau: fix storing invalid ptes
nouveau/hmm: support mapping large sysmem pages
nouveau: fix mapping 2MB sysmem pages
nouveau/hmm: fault one page at a time
mm/hmm: add tests for hmm_pfn_to_map_order()
mm/hmm: provide the page mapping order in hmm_range_fault()
|
|
Pull MMC updates from Ulf Hansson:
"MMC core:
- Add a new host cap bit and a corresponding DT property, to support
power cycling of the card by FW at system suspend/resume.
- Fix clock rate setting for SDIO in SDR12/SDR25 speed-mode
- Fix switch to 1/4-bit mode at system suspend/resume for SD-combo
cards
- Convert the mmc-pwrseq DT bindings to the json-schema
- Always allow the card detect uevent to be consumed by userspace
MMC host controllers:
- Convert a few DT bindings to the json-schema
- mtk-sd:
- Add support for command queue through cqhci
- Add support for the MT6779 variant
- renesas_sdhi_internal_dmac:
- Fix dma unmapping in the error path
- sdhci_am654:
- Add support for the AM65x PG2.0 variant
- Extend support for phys/clocks
- sdhci-cadence:
- Drop incorrect HW tuning for SD mode
- sdhci-msm:
- Add support for interconnect bandwidth scaling
- Enable internal voltage control
- Enable low power state for pinctrls
- sdhci-of-at91:
- Ludovic Desroches handovers maintenance to Eugen Hristev
- sdhci-pci-gli:
- Improve clock handling for GL975x
- sdhci-pci-o2micro:
- Add HW tuning for SDR104 mode
- Fix support for O2 host controller Seabird1"
* tag 'mmc-v5.9' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc: (66 commits)
mmc: mediatek: make function msdc_cqe_disable() static
MAINTAINERS: mmc: sdhci-of-at91: handover maintenance to Eugen Hristev
dt-bindings: mmc: mediatek: Add document for mt6779
mmc: mediatek: command queue support
mmc: mediatek: refine msdc timeout api
mmc: mediatek: add MT6779 MMC driver support
mmc: sdhci-pci-o2micro: Add HW tuning for SDR104 mode
mmc: sdhci-pci-o2micro: Bug fix for O2 host controller Seabird1
mmc: via-sdmmc: use generic power management
memstick: jmb38x_ms: use generic power management
mmc: sdhci-cadence: do not use hardware tuning for SD mode
mmc: sdhci-pci-gli: Set SDR104's clock to 205MHz and enable SSC for GL975x
mmc: cqhci: Fix a print format for the task descriptor
mmc: sdhci-of-arasan: fix timings allocation code
mmc: sdhci: Fix a potential uninitialized variable
dt-bindings: mmc: renesas,sdhi: convert to YAML
dt-bindings: mmc: convert arasan sdhci bindings to yaml
mmc: sdhci: Fix potential null pointer access while accessing vqmmc
mmc: core: Add MMC_CAP2_FULL_PWR_CYCLE_IN_SUSPEND
dt-bindings: mmc: Add full-pwr-cycle-in-suspend property
...
|
|
Pull hwmon updates from Guenter Roeck:
"Highlights:
- New driver for Sparx5 SoC temperature sensot
- New driver for Corsair Commander Pro
- MAX20710 support added to max20730 driver
Enhancements:
- max6697: Allow max6581 to create tempX_offset attributes
- gsc (Gateworks System Controller): add 16bit pre-scaled voltage mode
- adm1275: Enable adm1278 ADM1278_TEMP1_EN
- dell-smm: Add Latitude 5480 to fan control whitelist
Fixes:
- adc128d818: Fix advanced configuration register init
- pmbus/core: Use s64 instead of long for calculations to fix
overflow issues with 32-bit architectures
Plus various cleanups in several drivers"
* tag 'hwmon-for-v5.9' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging: (32 commits)
hwmon: (adc128d818) Fix advanced configuration register init
hwmon: (axi-fan-control) remove duplicate macros
hwmon: (i5k_amb, vt8231) Drop uses of pci_read_config_*() return value
hwmon: (sparx5) Make symbol 's5_temp_match' static
hwmon: (corsair-cpro) add reading pwm values
hwmon: sparx5: Add Sparx5 SoC temperature driver
dt-bindings: hwmon: Add Sparx5 temperature sensor
hwmon: (tmp401) Replace HTTP links with HTTPS ones
hwmon: (lm95234) Replace HTTP links with HTTPS ones
hwmon: (lm90) Replace HTTP links with HTTPS ones
hwmon: (k8temp) Replace HTTP links with HTTPS ones
hwmon: (jc42) Replace HTTP links with HTTPS ones
hwmon: (ina2xx) Replace HTTP links with HTTPS ones
hwmon: (ina209) Replace HTTP links with HTTPS ones
hwmon: Replace HTTP links with HTTPS ones
docs: hwmon: Replace HTTP links with HTTPS ones
hwmon: (adm1025) Replace HTTP links with HTTPS ones
hwmon: add Corsair Commander Pro driver
hwmon: (max6697) Allow max6581 to create tempX_offset
hwmon: (tmmp513) Replace HTTP links with HTTPS links
...
|
|
Pull Devicetree updates from Rob Herring:
- Improve device links cycle detection and breaking. Add more bindings
for device link dependencies.
- Refactor parsing 'no-map' in __reserved_mem_alloc_size()
- Improve DT unittest 'ranges' and 'dma-ranges' test case to check
differing cell sizes
- Various http to https link conversions
- Add a schema check to prevent 'syscon' from being used by itself
without a more specific compatible
- A bunch more DT binding conversions to schema
* tag 'devicetree-for-5.9' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (55 commits)
of: reserved-memory: remove duplicated call to of_get_flat_dt_prop() for no-map node
of: unittest: Use bigger address cells to catch parser regressions
dt-bindings: memory-controllers: Convert mmdc to json-schema
dt-bindings: mtd: Convert imx nand to json-schema
dt-bindings: mtd: Convert gpmi nand to json-schema
dt-bindings: iio: io-channel-mux: Fix compatible string in example code
of: property: Add device link support for pinctrl-0 through pinctrl-8
of: property: Add device link support for multiple DT bindings
dt-bindings: phy: ti: phy-gmii-sel: convert bindings to json-schema
dt-bindings: mux: mux.h: drop a duplicated word
dt-bindings: misc: Convert olpc,xo1.75-ec to json-schema
dt-bindings: aspeed-lpc: Replace HTTP links with HTTPS ones
dt-bindings: drm/bridge: Replace HTTP links with HTTPS ones
drm/tilcdc: Replace HTTP links with HTTPS ones
dt-bindings: iommu: renesas,ipmmu-vmsa: Add r8a774e1 support
dt-bindings: fpga: Replace HTTP links with HTTPS ones
dt-bindings: virtio: Replace HTTP links with HTTPS ones
dt-bindings: media: imx274: Add optional input clock and supplies
dt-bindings: i2c-gpio: Use 'deprecated' keyword on deprecated properties
dt-bindings: interrupt-controller: Fix typos in loongson,liointc.yaml
...
|
|
Pull GPIO updates from Linus Walleij:
"This is the bulk of GPIO changes for the v5.9 kernel cycle.
There is nothing too exciting in it, but a new macro that fixes a
build failure on a minor ARM32 platform that appeared yesterday is
part of it so we better merge it.
Core changes:
- Introduce the for_each_requested_gpio() macro to help in dependent
code all over the place. Also patch a few locations to use it while
we are at it.
- Split out the sysfs code into its own file.
- Split out the character device code into its own file, then make a
set of refactorings and improvements to this code. We are setting
the stage to revamp the userspace API a bit in the next cycle.
- Fix a whole slew of kerneldoc that was wrong or missing.
New drivers:
- The PCA953x driver now supports the PCAL9535.
Driver improvements:
- A host of incremental modernizations and improvements to the
PCA953x driver.
- Incremental improvements to the Xilinx Zynq driver.
- Some improvements to the GPIO aggregator driver.
- I ran all over the place switching all threaded and other drivers
requesting their own IRQ while using the core GPIO IRQ helpers to
pass the GPIO irq chip as a template instead of calling the
explicit set-up functions. Next merge window we may retire the old
code altogether"
* tag 'gpio-v5.9-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio: (97 commits)
gpio: wcove: Request IRQ after all initialisation done
gpio: crystalcove: Free IRQ on error path
gpio: pca953x: Request IRQ after all initialisation done
gpio: don't use same lockdep class for all devm_gpiochip_add_data users
gpio: max732x: Use irqchip template
gpio: stmpe: Move chip registration
gpio: rcar: Use irqchip template
gpio: regmap: fix type clash
gpio: Correct kernel-doc inconsistency
gpio: pci-idio-16: Use irqchip template
gpio: pcie-idio-24: Use irqchip template
gpio: 104-idio-16: Use irqchip template
gpio: 104-idi-48: Use irqchip template
gpio: 104-dio-48e: Use irqchip template
gpio: ws16c48: Use irqchip template
gpio: omap: improve coding style for pin config flags
gpio: dln2: Use irqchip template
gpio: sch: Add a blank line between declaration and code
gpio: sch: changed every 'unsigned' to 'unsigned int'
gpio: ich: changed every 'unsigned' to 'unsigned int'
...
|
|
This is hopefully the final piece of the crazy puzzle with random.h
dependencies.
And by "hopefully" I obviously mean "Linus is a hopeless optimist".
Reported-and-tested-by: Daniel Díaz <daniel.diaz@linaro.org>
Acked-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
On architectures defining _HAVE_ARCH_IPV6_CSUM, we get
csum_ipv6_magic() defined by means of arch checksum.h headers. On
other architectures, we actually need to include net/ip6_checksum.h
to be able to use it.
Without this include, building with defconfig breaks at least for
s390.
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Fixes: 4cb47a8644cc ("tunnels: PMTU discovery support for directly bridged IP packets")
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The msg_zerocopy test pins the sender and receiver threads to separate
cores to reduce variance between runs.
But it hardcodes the cores and skips core 0, so it fails on machines
with the selected cores offline, or simply fewer cores.
The test mainly gives code coverage in automated runs. The throughput
of zerocopy ('-z') and non-zerocopy runs is logged for manual
inspection.
Continue even when sched_setaffinity fails. Just log to warn anyone
interpreting the data.
Fixes: 07b65c5b31ce ("test: add msg_zerocopy test")
Reported-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Willem de Bruijn <willemb@google.com>
Acked-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Nicolas reported the following oops:
[ 1521.392541] BUG: kernel NULL pointer dereference, address: 00000000000000c0
[ 1521.394189] #PF: supervisor read access in kernel mode
[ 1521.395376] #PF: error_code(0x0000) - not-present page
[ 1521.396607] PGD 0 P4D 0
[ 1521.397156] Oops: 0000 [#1] SMP PTI
[ 1521.398020] CPU: 0 PID: 22986 Comm: kworker/0:2 Not tainted 5.8.0-rc4+ #109
[ 1521.399618] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-1ubuntu1 04/01/2014
[ 1521.401728] Workqueue: events mptcp_worker
[ 1521.402651] RIP: 0010:mptcp_subflow_create_socket+0xf1/0x1c0
[ 1521.403954] Code: 24 08 89 44 24 04 48 8b 7a 18 e8 2a 48 d4 ff 8b 44 24 04 85 c0 75 7a 48 8b 8b 78 02 00 00 48 8b 54 24 08 48 8d bb 80 00 00 00 <48> 8b 89 c0 00 00 00 48 89 8a c0 00 00 00 48 8b 8b 78 02 00 00 8b
[ 1521.408201] RSP: 0000:ffffabc4002d3c60 EFLAGS: 00010246
[ 1521.409433] RAX: 0000000000000000 RBX: ffffa0b9ad8c9a00 RCX: 0000000000000000
[ 1521.411096] RDX: ffffa0b9ae78a300 RSI: 00000000fffffe01 RDI: ffffa0b9ad8c9a80
[ 1521.412734] RBP: ffffa0b9adff2e80 R08: ffffa0b9af02d640 R09: ffffa0b9ad923a00
[ 1521.414333] R10: ffffabc4007139f8 R11: fefefefefefefeff R12: ffffabc4002d3cb0
[ 1521.415918] R13: ffffa0b9ad91fa58 R14: ffffa0b9ad8c9f9c R15: 0000000000000000
[ 1521.417592] FS: 0000000000000000(0000) GS:ffffa0b9af000000(0000) knlGS:0000000000000000
[ 1521.419490] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 1521.420839] CR2: 00000000000000c0 CR3: 000000002951e006 CR4: 0000000000160ef0
[ 1521.422511] Call Trace:
[ 1521.423103] __mptcp_subflow_connect+0x94/0x1f0
[ 1521.425376] mptcp_pm_create_subflow_or_signal_addr+0x200/0x2a0
[ 1521.426736] mptcp_worker+0x31b/0x390
[ 1521.431324] process_one_work+0x1fc/0x3f0
[ 1521.432268] worker_thread+0x2d/0x3b0
[ 1521.434197] kthread+0x117/0x130
[ 1521.435783] ret_from_fork+0x22/0x30
on some unconventional configuration.
The MPTCP protocol is trying to create a subflow for an
unaccepted server socket. That is allowed by the RFC, even
if subflow creation will likely fail.
Unaccepted sockets have still a NULL sk_socket field,
avoid the issue by failing earlier.
Reported-and-tested-by: Nicolas Rybowski <nicolas.rybowski@tessares.net>
Fixes: 7d14b0d2b9b3 ("mptcp: set correct vfs info for subflows")
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Po-Hsu Lin says:
====================
selftests: rtnetlink: Fix for false-negative return values
This patchset will address the false-negative return value issue
caused by the following:
1. The return value "ret" in this script will be reset to 0 from
the beginning of each sub-test in rtnetlink.sh, therefore this
rtnetlink test will always pass if the last sub-test has passed.
2. The test result from two sub-tests in kci_test_encap() were not
being processed, thus they will not affect the final test result
of this test.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
kci_test_encap() is actually composed by two different sub-tests,
kci_test_encap_vxlan() and kci_test_encap_fou()
Therefore we should check the test result of these two in
kci_test_encap() to let the script be aware of the pass / fail status.
Otherwise it will generate false-negative result like below:
$ sudo ./test.sh
PASS: policy routing
PASS: route get
PASS: preferred_lft addresses have expired
PASS: promote_secondaries complete
PASS: tc htb hierarchy
PASS: gre tunnel endpoint
PASS: gretap
PASS: ip6gretap
PASS: erspan
PASS: ip6erspan
PASS: bridge setup
PASS: ipv6 addrlabel
PASS: set ifalias 5b193daf-0a08-46d7-af2c-e7aadd422ded for test-dummy0
PASS: vrf
PASS: vxlan
FAIL: can't add fou port 7777, skipping test
PASS: macsec
PASS: bridge fdb get
PASS: neigh get
$ echo $?
0
Signed-off-by: Po-Hsu Lin <po-hsu.lin@canonical.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The return value "ret" will be reset to 0 from the beginning of each
sub-test in rtnetlink.sh, therefore this test will always pass if the
last sub-test has passed:
$ sudo ./rtnetlink.sh
PASS: policy routing
PASS: route get
PASS: preferred_lft addresses have expired
PASS: promote_secondaries complete
PASS: tc htb hierarchy
PASS: gre tunnel endpoint
PASS: gretap
PASS: ip6gretap
PASS: erspan
PASS: ip6erspan
PASS: bridge setup
PASS: ipv6 addrlabel
PASS: set ifalias a39ee707-e36b-41d3-802f-63179ed4d580 for test-dummy0
PASS: vrf
PASS: vxlan
FAIL: can't add fou port 7777, skipping test
PASS: macsec
PASS: ipsec
3,7c3,7
< sa[0] spi=0x00000009 proto=0x32 salt=0x64636261 crypt=1
< sa[0] key=0x31323334 35363738 39303132 33343536
< sa[1] rx ipaddr=0x00000000 00000000 00000000 c0a87b03
< sa[1] spi=0x00000009 proto=0x32 salt=0x64636261 crypt=1
< sa[1] key=0x31323334 35363738 39303132 33343536
---
> sa[0] spi=0x00000009 proto=0x32 salt=0x61626364 crypt=1
> sa[0] key=0x34333231 38373635 32313039 36353433
> sa[1] rx ipaddr=0x00000000 00000000 00000000 037ba8c0
> sa[1] spi=0x00000009 proto=0x32 salt=0x61626364 crypt=1
> sa[1] key=0x34333231 38373635 32313039 36353433
FAIL: ipsec_offload incorrect driver data
FAIL: ipsec_offload
PASS: bridge fdb get
PASS: neigh get
$ echo $?
0
Make "ret" become a local variable for all sub-tests.
Also, check the sub-test results in kci_test_rtnl() and return the
final result for this test.
Signed-off-by: Po-Hsu Lin <po-hsu.lin@canonical.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Although we can detect the chip revision 100% at runtime, it is useful
to specify it in the device tree compatible string too, because
otherwise there would be no way to assess the correctness of device tree
bindings statically, without booting a board (only some switch versions
have internal RGMII delays and/or an SGMII port).
But for testing the P/Q/R/S support, what I have is a reworked board
with the SJA1105T replaced by a pin-compatible SJA1105Q, and I don't
want to keep a separate device tree blob just for this one-off board.
Since just the chip has been replaced, its RGMII delay setup is
inherently the same (meaning: delays added by the PHY on the slave
ports, and by PCB traces on the fixed-link CPU port).
For this board, I'd rather have the driver shout at me, but go ahead and
use what it found even if it doesn't match what it's been told is there.
[ 2.970826] sja1105 spi0.1: Device tree specifies chip SJA1105T but found SJA1105Q, please fix it!
[ 2.980010] sja1105 spi0.1: Probed switch chip: SJA1105Q
[ 3.005082] sja1105 spi0.1: Enabled switch tagging
Signed-off-by: Vladimir Oltean <olteanv@gmail.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Xin Long says:
====================
net: fix a mcast issue for tipc udp media
Patch 1 is to add a function to get the dev by source address,
which will be used by Patch 2.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Without ub->ifindex set for ipv6 address in tipc_udp_enable(),
ipv6_sock_mc_join() may make the wrong dev join the multicast
address in enable_mcast(). This causes that tipc links would
never be created.
So fix it by getting the right netdev and setting ub->ifindex,
as it does for ipv4 address.
Reported-by: Shuang Li <shuali@redhat.com>
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Acked-by: Ying Xue <ying.xue@windriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This is to add an ip_dev_find like function for ipv6, used to find
the dev by saddr.
It will be used by TIPC protocol. So also export it.
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Acked-by: Ying Xue <ying.xue@windriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Pull USB/Thunderbolt updates from Greg KH:
"Here is the large set of USB and Thunderbolt patches for 5.9-rc1.
Nothing really magic/major in here, just lots of little changes and
updates:
- clean up language usages in USB core and some drivers
- Thunderbolt driver updates and additions
- USB Gadget driver updates
- dwc3 driver updates (like always...)
- build with "W=1" warning fixups
- mtu3 driver updates
- usb-serial driver updates and device ids
- typec additions and updates for new hardware
- xhci debug code updates for future platforms
- cdns3 driver updates
- lots of other minor driver updates and fixes and cleanups
All of these have been in linux-next for a while with no reported
issues"
* tag 'usb-5.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (330 commits)
usb: common: usb-conn-gpio: Register charger
usb: mtu3: simplify mtu3_req_complete()
usb: mtu3: clear dual mode of u3port when disable device
usb: mtu3: use MTU3_EP_WEDGE flag
usb: mtu3: remove useless member @busy in mtu3_ep struct
usb: mtu3: remove repeated error log
usb: mtu3: add ->udc_set_speed()
usb: mtu3: introduce a funtion to check maximum speed
usb: mtu3: clear interrupts status when disable interrupts
usb: mtu3: reinitialize CSR registers
usb: mtu3: fix macro for maximum number of packets
usb: mtu3: remove unnecessary pointer checks
usb: xhci: Fix ASMedia ASM1142 DMA addressing
usb: xhci: define IDs for various ASMedia host controllers
usb: musb: convert to devm_platform_ioremap_resource_byname
usb: gadget: tegra-xudc: convert to devm_platform_ioremap_resource_byname
usb: gadget: r8a66597: convert to devm_platform_ioremap_resource_byname
usb: dwc3: convert to devm_platform_ioremap_resource_byname
usb: cdns3: convert to devm_platform_ioremap_resource_byname
usb: phy: am335x: convert to devm_platform_ioremap_resource_byname
...
|
|
ovs_flow_tbl_destroy always is called from RCU callback
or error path. It is no need to check if rcu_read_lock
or lockdep_ovsl_is_held was held.
ovs_dp_cmd_fill_info always is called with ovs_mutex,
So use the rcu_dereference_ovsl instead of rcu_dereference
in ovs_flow_tbl_masks_cache_size.
Fixes: 9bf24f594c6a ("net: openvswitch: make masks cache size configurable")
Cc: Eelco Chaudron <echaudro@redhat.com>
Reported-by: syzbot+c0eb9e7cdde04e4eb4be@syzkaller.appspotmail.com
Reported-by: syzbot+f612c02823acb02ff9bc@syzkaller.appspotmail.com
Signed-off-by: Tonghao Zhang <xiangxia.m.yue@gmail.com>
Acked-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
Alexander A. Klimov
Ilias Stamatis
Peter Zijlstra
David Hildenbrand
Ralph Campbell
Linus Torvalds
Randy Dunlap
Dean Nelson
David S. Miller
Oliver Neukum
Mike Rapoport
Jacek Anaszewski
Stefano Brivio
Willem de Bruijn
Paolo Abeni
Po-Hsu Lin
Vladimir Oltean
Xin Long
Tonghao Zhang