| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
drm_encoder->crtc is deprecated for atomic drivers, but
nouveau_encoder->crtc is safe.
Signed-off-by: Lyude Paul <lyude@redhat.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
|
|
Despite being an atomic driver, nouveau has a lot of leftover code that
relies on retrieving information regarding the new atomic state from
members of drm_encoder and drm_crtc. The first field being used,
drm_encoder.crtc, is deprecated for atomic drivers. The second field being
used is drm_crtc.state, which is only really sensible to use outside of an
atomic modeset.
So, add some helpers to lookup the current crtc for a given outp from the
atomic state. Then, convert most of the code in dispnv50/disp.c to use said
new helper, along with the relevant DRM atomic helpers for retrieving the
new encoder/crtc combinations for a new atomic state.
Note that we don't get rid of the nouveau_encoder.crtc field entirely for
three reasons:
- Legacy modesetting for pre-nv50 still uses it
- It doesn't cause any locking issues
- We need it for the HDA callbacks, as grabbing atomic modesetting locks in
those would be a mess.
Signed-off-by: Lyude Paul <lyude@redhat.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
|
|
Just to be more consistent with the order of args that DRM helpers like
drm_atomic_get_new_crtc_state() use.
Signed-off-by: Lyude Paul <lyude@redhat.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
|
|
I have a strange dejavu feeling that I tried to submit a patch for this in
the past, but that it was rejected. I can't remember though, but I'm
further convinced this patch is the right thing to do anyway.
We label the to-be-committed head state in nv50_msto_atomic_enable() as
armh. Normally armh implies a state which is currently armed in hardware.
nv50_msto_atomic_enable() is called _after_ drm_atomic_swap_state()
however, but before the commit tail ends, which means that said state is
not actually armed on hardware.
As well - take note that this is the same convention followed in all of the
other atomic_enable() callbacks.
So, let's correct this to asyh.
Signed-off-by: Lyude Paul <lyude@redhat.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
|
|
No functional changes, just change the function names to match the
callbacks they provide.
Signed-off-by: Lyude Paul <lyude@redhat.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
|
|
Noticed these in both the disable (which we'll be getting rid of in a
moment) and the atomic disable callbacks: both callback types check whether
or not there's actually a CRTC assigned to the given encoder. However, as
->atomic_disable and ->disable will never be called without a CRTC assigned
to the given encoder there's no point in this check. So just remove it.
Signed-off-by: Lyude Paul <lyude@redhat.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
|
|
Previous hardware allowed a MMU fault to be generated by software to
trigger a context switch for engine recovery. Turing has the capability
to preempt all work from a specific runlist processor and removed the
registers currently used for triggering MMU faults. Attempting to access
these non-existent registers results in further errors, so use the
runlist preemption register instead.
Signed-off-by: Alistair Popple <apopple@nvidia.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
|
|
Some of the low level FIFO interrupt status bits have changed for
Turing. Update the handling of these to match the hardware.
Signed-off-by: Alistair Popple <apopple@nvidia.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
|
|
Turing requires some changes to FIFO interrupt handling due to changes
in HW register layout. It also requires some changes to implement robust
channel (RC) recovery. This preparatory patch moves the functions
requiring changes into nvkm/engine/fifo/tu102.c so they can be altered
without affecting gk104 and other users. It should not introduce any
functional changes.
Signed-off-by: Alistair Popple <apopple@nvidia.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
|
|
This is no longer needed now that tu102_mc_intr_stat has been updated to
look at the correct top-level interrupt bits.
Signed-off-by: Alistair Popple <apopple@nvidia.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
|
|
Turing reports MMU fault interrupts via new top level interrupt
registers. The old PMC MMU interrupt vector is not used by the HW. This
means we can remap the new top-level MMU interrupt to the exisiting PMC
MMU bit which simplifies the implementation until all interrupts are
moved over to using the new top level registers.
Signed-off-by: Alistair Popple <apopple@nvidia.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
|
|
Since I'm almost certain I didn't get capability checking right for
pre-volta chipsets, let's start logging any caps we find to make things
like this obvious in the future.
Signed-off-by: Lyude Paul <lyude@redhat.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
|
|
This was a mistake that was present before, but never got noticed until
we converted over to using nvidia's class headers for display
programming. Luckily though it never caused any problems, since we
always end up calling crc907d_set_src() after head907d_mode().
So, let's get rid of this.
Signed-off-by: Lyude Paul <lyude@redhat.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
|
|
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
|
|
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
|
|
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
|
|
Backmerge v5.11-rc5 into drm-next to clean up a bunch of conflicts we are dragging around.
Signed-off-by: Dave Airlie <airlied@redhat.com>
|
|
|
|
Pull arch/sh updates from Rich Felker:
"Cleanup and warning fixes"
* tag 'sh-for-5.11' of git://git.libc.org/linux-sh:
sh/intc: Restore devm_ioremap() alignment
sh: mach-sh03: remove duplicate include
arch: sh: remove duplicate include
sh: Drop ARCH_NR_GPIOS definition
sh: Remove unused HAVE_COPY_THREAD_TLS macro
sh: remove CONFIG_IDE from most defconfig
sh: mm: Convert to DEFINE_SHOW_ATTRIBUTE
sh: intc: Convert to DEFINE_SHOW_ATTRIBUTE
arch/sh: hyphenate Non-Uniform in Kconfig prompt
sh: dma: fix kconfig dependency for G2_DMA
|
|
Pull io_uring fixes from Jens Axboe:
"Still need a final cancelation fix that isn't quite done done,
expected in the next day or two. That said, this contains:
- Wakeup fix for IOPOLL requests
- SQPOLL split close op handling fix
- Ensure that any use of io_uring fd itself is marked as inflight
- Short non-regular file read fix (Pavel)
- Fix up bad false positive warning (Pavel)
- SQPOLL fixes (Pavel)
- In-flight removal fix (Pavel)"
* tag 'io_uring-5.11-2021-01-24' of git://git.kernel.dk/linux-block:
io_uring: account io_uring internal files as REQ_F_INFLIGHT
io_uring: fix sleeping under spin in __io_clean_op
io_uring: fix short read retries for non-reg files
io_uring: fix SQPOLL IORING_OP_CLOSE cancelation state
io_uring: fix skipping disabling sqo on exec
io_uring: fix uring_flush in exit_files() warning
io_uring: fix false positive sqo warning on flush
io_uring: iopoll requests should also wake task ->in_idle state
|
|
Pull block fixes from Jens Axboe:
- NVMe pull request from Christoph:
- fix a status code in nvmet (Chaitanya Kulkarni)
- avoid double completions in nvme-rdma/nvme-tcp (Chao Leng)
- fix the CMB support to cope with NVMe 1.4 controllers (Klaus Jensen)
- fix PRINFO handling in the passthrough ioctl (Revanth Rajashekar)
- fix a double DMA unmap in nvme-pci
- lightnvm error path leak fix (Pan)
- MD pull request from Song:
- Flush request fix (Xiao)
* tag 'block-5.11-2021-01-24' of git://git.kernel.dk/linux-block:
lightnvm: fix memory leak when submit fails
nvme-pci: fix error unwind in nvme_map_data
nvme-pci: refactor nvme_unmap_data
md: Set prev_flush_start and flush_bio in an atomic way
nvmet: set right status on error in id-ns handler
nvme-pci: allow use of cmb on v1.4 controllers
nvme-tcp: avoid request double completion for concurrent nvme_tcp_timeout
nvme-rdma: avoid request double completion for concurrent nvme_rdma_timeout
nvme: check the PRINFO bit before deciding the host buffer length
|
|
Merge misc fixes from Andrew Morton:
"18 patches.
Subsystems affected by this patch series: mm (pagealloc, memcg, kasan,
memory-failure, and highmem), ubsan, proc, and MAINTAINERS"
* emailed patches from Andrew Morton <akpm@linux-foundation.org>:
MAINTAINERS: add a couple more files to the Clang/LLVM section
proc_sysctl: fix oops caused by incorrect command parameters
powerpc/mm/highmem: use __set_pte_at() for kmap_local()
mips/mm/highmem: use set_pte() for kmap_local()
mm/highmem: prepare for overriding set_pte_at()
sparc/mm/highmem: flush cache and TLB
mm: fix page reference leak in soft_offline_page()
ubsan: disable unsigned-overflow check for i386
kasan, mm: fix resetting page_alloc tags for HW_TAGS
kasan, mm: fix conflicts with init_on_alloc/free
kasan: fix HW_TAGS boot parameters
kasan: fix incorrect arguments passing in kasan_add_zero_shadow
kasan: fix unaligned address is unhandled in kasan_remove_zero_shadow
mm: fix numa stats for thp migration
mm: memcg: fix memcg file_dirty numa stat
mm: memcg/slab: optimize objcg stock draining
mm: fix initialization of struct page for holes in memory layout
x86/setup: don't remove E820_TYPE_RAM for pfn 0
|
|
Pull char/misc driver fixes from Greg KH:
"Here are some small char/misc driver fixes for 5.11-rc5:
- habanalabs driver fixes
- phy driver fixes
- hwtracing driver fixes
- rtsx cardreader driver fix
All of these have been in linux-next with no reported issues"
* tag 'char-misc-5.11-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc:
misc: rtsx: init value of aspm_enabled
habanalabs: disable FW events on device removal
habanalabs: fix backward compatibility of idle check
habanalabs: zero pci counters packet before submit to FW
intel_th: pci: Add Alder Lake-P support
stm class: Fix module init return on allocation failure
habanalabs: prevent soft lockup during unmap
habanalabs: fix reset process in case of failures
habanalabs: fix dma_addr passed to dma_mmap_coherent
phy: mediatek: allow compile-testing the dsi phy
phy: cpcap-usb: Fix warning for missing regulator_disable
PHY: Ingenic: fix unconditional build of phy-ingenic-usb
|
|
Pull driver core fixes from Greg KH:
"Here are some small driver core fixes for 5.11-rc5 that resolve some
reported problems:
- revert of a -rc1 patch that was causing problems with some machines
- device link device name collision problem fix (busses only have to
name devices unique to their bus, not unique to all busses)
- kernfs splice bugfixes to resolve firmware loading problems for
Qualcomm systems.
- other tiny driver core fixes for minor issues reported.
All of these have been in linux-next with no reported problems"
* tag 'driver-core-5.11-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core:
driver core: Fix device link device name collision
driver core: Extend device_is_dependent()
kernfs: wire up ->splice_read and ->splice_write
kernfs: implement ->write_iter
kernfs: implement ->read_iter
Revert "driver core: Reorder devices on successful probe"
Driver core: platform: Add extra error check in devm_platform_get_irqs_affinity()
drivers core: Free dma_range_map when driver probe failed
|
|
Pull staging/IIO driver fixes from Greg KH:
"Here are some IIO driver fixes for 5.11-rc5 to resolve some reported
problems.
Nothing major, just a few small fixes, all of these have been in
linux-next for a while and full details are in the shortlog"
* tag 'staging-5.11-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging:
iio: sx9310: Fix semtech,avg-pos-strength setting when > 16
iio: common: st_sensors: fix possible infinite loop in st_sensors_irq_thread
iio: ad5504: Fix setting power-down state
counter:ti-eqep: remove floor
drivers: iio: temperature: Add delay after the addressed reset command in mlx90632.c
iio: adc: ti_am335x_adc: remove omitted iio_kfifo_free()
dt-bindings: iio: accel: bma255: Fix bmc150/bmi055 compatible
iio: sx9310: Off by one in sx9310_read_thresh()
|
|
Pull tty/serial fixes from Greg KH:
"Here are three small tty/serial fixes for 5.11-rc5 to resolve reported
problems:
- two patches to fix up writing to ttys with splice
- mvebu-uart driver fix for reported problem
All of these have been in linux-next with no reported problems"
* tag 'tty-5.11-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty:
tty: fix up hung_up_tty_write() conversion
tty: implement write_iter
serial: mvebu-uart: fix tx lost characters at power off
|
|
Pull USB fixes from Greg KH:
"Here are some small USB driver fixes for 5.11-rc5. They resolve:
- xhci issues for some reported problems
- ehci driver issue for one specific device
- USB gadget fixes for some reported problems
- cdns3 driver fixes for issues reported
- MAINTAINERS file update
- thunderbolt minor fix
All of these have been in linux-next with no reported issues"
* tag 'usb-5.11-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb:
usb: bdc: Make bdc pci driver depend on BROKEN
xhci: tegra: Delay for disabling LFPS detector
xhci: make sure TRB is fully written before giving it to the controller
usb: udc: core: Use lock when write to soft_connect
USB: gadget: dummy-hcd: Fix errors in port-reset handling
usb: gadget: aspeed: fix stop dma register setting.
USB: ehci: fix an interrupt calltrace error
ehci: fix EHCI host controller initialization sequence
MAINTAINERS: update Peter Chen's email address
thunderbolt: Drop duplicated 0x prefix from format string
MAINTAINERS: Update address for Cadence USB3 driver
usb: cdns3: imx: improve driver .remove API
usb: cdns3: imx: fix can't create core device the second time issue
usb: cdns3: imx: fix writing read-only memory issue
|
|
The K: entry should ensure that Nick and I always get CC'd on patches that
touch these files but it is better to be explicit rather than implicit.
Link: https://lkml.kernel.org/r/20210114004059.2129921-1-natechancellor@gmail.com
Signed-off-by: Nathan Chancellor <natechancellor@gmail.com>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
The process_sysctl_arg() does not check whether val is empty before
invoking strlen(val). If the command line parameter () is incorrectly
configured and val is empty, oops is triggered.
For example:
"hung_task_panic=1" is incorrectly written as "hung_task_panic", oops is
triggered. The call stack is as follows:
Kernel command line: .... hung_task_panic
......
Call trace:
__pi_strlen+0x10/0x98
parse_args+0x278/0x344
do_sysctl_args+0x8c/0xfc
kernel_init+0x5c/0xf4
ret_from_fork+0x10/0x30
To fix it, check whether "val" is empty when "phram" is a sysctl field.
Error codes are returned in the failure branch, and error logs are
generated by parse_args().
Link: https://lkml.kernel.org/r/20210118133029.28580-1-nixiaoming@huawei.com
Fixes: 3db978d480e2843 ("kernel/sysctl: support setting sysctl parameters from kernel command line")
Signed-off-by: Xiaoming Ni <nixiaoming@huawei.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Luis Chamberlain <mcgrof@kernel.org>
Cc: Kees Cook <keescook@chromium.org>
Cc: Iurii Zaikin <yzaikin@google.com>
Cc: Alexey Dobriyan <adobriyan@gmail.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Heiner Kallweit <hkallweit1@gmail.com>
Cc: Randy Dunlap <rdunlap@infradead.org>
Cc: <stable@vger.kernel.org> [5.8+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
The original PowerPC highmem mapping function used __set_pte_at() to
denote that the mapping is per CPU. This got lost with the conversion
to the generic implementation.
Override the default map function.
Link: https://lkml.kernel.org/r/20210112170411.281464308@linutronix.de
Fixes: 47da42b27a56 ("powerpc/mm/highmem: Switch to generic kmap atomic")
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Andreas Larsson <andreas@gaisler.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Paul Cercueil <paul@crapouillou.net>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
set_pte_at() on MIPS invokes update_cache() which might recurse into
kmap_local().
Use set_pte() like the original MIPS highmem implementation did.
Link: https://lkml.kernel.org/r/20210112170411.187513575@linutronix.de
Fixes: a4c33e83bca1 ("mips/mm/highmem: Switch to generic kmap atomic")
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reported-by: Paul Cercueil <paul@crapouillou.net>
Reported-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Acked-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: Andreas Larsson <andreas@gaisler.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
The generic kmap_local() map function uses set_pte_at(), but MIPS requires
set_pte() and PowerPC wants __set_pte_at().
Provide arch_kmap_local_set_pte() and default it to set_pte_at().
Link: https://lkml.kernel.org/r/20210112170411.056306194@linutronix.de
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Andreas Larsson <andreas@gaisler.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Paul Cercueil <paul@crapouillou.net>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Patch series "mm/highmem: Fix fallout from generic kmap_local
conversions".
The kmap_local conversion wreckaged sparc, mips and powerpc as it missed
some of the details in the original implementation.
This patch (of 4):
The recent conversion to the generic kmap_local infrastructure failed to
assign the proper pre/post map/unmap flush operations for sparc.
Sparc requires cache flush before map/unmap and tlb flush afterwards.
Link: https://lkml.kernel.org/r/20210112170136.078559026@linutronix.de
Link: https://lkml.kernel.org/r/20210112170410.905976187@linutronix.de
Fixes: 3293efa97807 ("sparc/mm/highmem: Switch to generic kmap atomic")
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reported-by: Andreas Larsson <andreas@gaisler.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Paul Cercueil <paul@crapouillou.net>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
The conversion to move pfn_to_online_page() internal to
soft_offline_page() missed that the get_user_pages() reference taken by
the madvise() path needs to be dropped when pfn_to_online_page() fails.
Note the direct sysfs-path to soft_offline_page() does not perform a
get_user_pages() lookup.
When soft_offline_page() is handed a pfn_valid() && !pfn_to_online_page()
pfn the kernel hangs at dax-device shutdown due to a leaked reference.
Link: https://lkml.kernel.org/r/161058501210.1840162.8108917599181157327.stgit@dwillia2-desk3.amr.corp.intel.com
Fixes: feec24a6139d ("mm, soft-offline: convert parameter to pfn")
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Oscar Salvador <osalvador@suse.de>
Reviewed-by: Naoya Horiguchi <naoya.horiguchi@nec.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Qian Cai <cai@lca.pw>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Building ubsan kernels even for compile-testing introduced these
warnings in my randconfig environment:
crypto/blake2b_generic.c:98:13: error: stack frame size of 9636 bytes in function 'blake2b_compress' [-Werror,-Wframe-larger-than=]
static void blake2b_compress(struct blake2b_state *S,
crypto/sha512_generic.c:151:13: error: stack frame size of 1292 bytes in function 'sha512_generic_block_fn' [-Werror,-Wframe-larger-than=]
static void sha512_generic_block_fn(struct sha512_state *sst, u8 const *src,
lib/crypto/curve25519-fiat32.c:312:22: error: stack frame size of 2180 bytes in function 'fe_mul_impl' [-Werror,-Wframe-larger-than=]
static noinline void fe_mul_impl(u32 out[10], const u32 in1[10], const u32 in2[10])
lib/crypto/curve25519-fiat32.c:444:22: error: stack frame size of 1588 bytes in function 'fe_sqr_impl' [-Werror,-Wframe-larger-than=]
static noinline void fe_sqr_impl(u32 out[10], const u32 in1[10])
Further testing showed that this is caused by
-fsanitize=unsigned-integer-overflow, but is isolated to the 32-bit x86
architecture.
The one in blake2b immediately overflows the 8KB stack area
architectures, so better ensure this never happens by disabling the
option for 32-bit x86.
Link: https://lkml.kernel.org/r/20210112202922.2454435-1-arnd@kernel.org
Link: https://lore.kernel.org/lkml/20201230154749.746641-1-arnd@kernel.org/
Fixes: d0a3ac549f38 ("ubsan: enable for all*config builds")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Nathan Chancellor <natechancellor@gmail.com>
Cc: Nick Desaulniers <ndesaulniers@google.com>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Cc: Marco Elver <elver@google.com>
Cc: George Popescu <georgepope@android.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
A previous commit added resetting KASAN page tags to
kernel_init_free_pages() to avoid false-positives due to accesses to
metadata with the hardware tag-based mode.
That commit did reset page tags before the metadata access, but didn't
restore them after. As the result, KASAN fails to detect bad accesses
to page_alloc allocations on some configurations.
Fix this by recovering the tag after the metadata access.
Link: https://lkml.kernel.org/r/02b5bcd692e912c27d484030f666b350ad7e4ae4.1611074450.git.andreyknvl@google.com
Fixes: aa1ef4d7b3f6 ("kasan, mm: reset tags when accessing metadata")
Signed-off-by: Andrey Konovalov <andreyknvl@google.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Marco Elver <elver@google.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will.deacon@arm.com>
Cc: Vincenzo Frascino <vincenzo.frascino@arm.com>
Cc: Andrey Ryabinin <aryabinin@virtuozzo.com>
Cc: Peter Collingbourne <pcc@google.com>
Cc: Evgenii Stepanov <eugenis@google.com>
Cc: Branislav Rankov <Branislav.Rankov@arm.com>
Cc: Kevin Brodsky <kevin.brodsky@arm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
A few places where SLUB accesses object's data or metadata were missed
in a previous patch. This leads to false positives with hardware
tag-based KASAN when bulk allocations are used with init_on_alloc/free.
Fix the false-positives by resetting pointer tags during these accesses.
(The kasan_reset_tag call is removed from slab_alloc_node, as it's added
into maybe_wipe_obj_freeptr.)
Link: https://linux-review.googlesource.com/id/I50dd32838a666e173fe06c3c5c766f2c36aae901
Link: https://lkml.kernel.org/r/093428b5d2ca8b507f4a79f92f9929b35f7fada7.1610731872.git.andreyknvl@google.com
Fixes: aa1ef4d7b3f67 ("kasan, mm: reset tags when accessing metadata")
Signed-off-by: Andrey Konovalov <andreyknvl@google.com>
Reported-by: Dmitry Vyukov <dvyukov@google.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Vincenzo Frascino <vincenzo.frascino@arm.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Marco Elver <elver@google.com>
Cc: Will Deacon <will.deacon@arm.com>
Cc: Andrey Ryabinin <aryabinin@virtuozzo.com>
Cc: Peter Collingbourne <pcc@google.com>
Cc: Evgenii Stepanov <eugenis@google.com>
Cc: Branislav Rankov <Branislav.Rankov@arm.com>
Cc: Kevin Brodsky <kevin.brodsky@arm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
The initially proposed KASAN command line parameters are redundant.
This change drops the complex "kasan.mode=off/prod/full" parameter and
adds a simpler kill switch "kasan=off/on" instead. The new parameter
together with the already existing ones provides a cleaner way to
express the same set of features.
The full set of parameters with this change:
kasan=off/on - whether KASAN is enabled
kasan.fault=report/panic - whether to only print a report or also panic
kasan.stacktrace=off/on - whether to collect alloc/free stack traces
Default values:
kasan=on
kasan.fault=report
kasan.stacktrace=on (if CONFIG_DEBUG_KERNEL=y)
kasan.stacktrace=off (otherwise)
Link: https://linux-review.googlesource.com/id/Ib3694ed90b1e8ccac6cf77dfd301847af4aba7b8
Link: https://lkml.kernel.org/r/4e9c4a4bdcadc168317deb2419144582a9be6e61.1610736745.git.andreyknvl@google.com
Signed-off-by: Andrey Konovalov <andreyknvl@google.com>
Reviewed-by: Vincenzo Frascino <vincenzo.frascino@arm.com>
Reviewed-by: Marco Elver <elver@google.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will.deacon@arm.com>
Cc: Andrey Ryabinin <aryabinin@virtuozzo.com>
Cc: Peter Collingbourne <pcc@google.com>
Cc: Evgenii Stepanov <eugenis@google.com>
Cc: Branislav Rankov <Branislav.Rankov@arm.com>
Cc: Kevin Brodsky <kevin.brodsky@arm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
kasan_remove_zero_shadow() shall use original virtual address, start and
size, instead of shadow address.
Link: https://lkml.kernel.org/r/20210103063847.5963-1-lecopzer@gmail.com
Fixes: 0207df4fa1a86 ("kernel/memremap, kasan: make ZONE_DEVICE with work with KASAN")
Signed-off-by: Lecopzer Chen <lecopzer.chen@mediatek.com>
Reviewed-by: Andrey Konovalov <andreyknvl@google.com>
Cc: Andrey Ryabinin <aryabinin@virtuozzo.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Alexander Potapenko <glider@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
During testing kasan_populate_early_shadow and kasan_remove_zero_shadow,
if the shadow start and end address in kasan_remove_zero_shadow() is not
aligned to PMD_SIZE, the remain unaligned PTE won't be removed.
In the test case for kasan_remove_zero_shadow():
shadow_start: 0xffffffb802000000, shadow end: 0xffffffbfbe000000
3-level page table:
PUD_SIZE: 0x40000000 PMD_SIZE: 0x200000 PAGE_SIZE: 4K
0xffffffbf80000000 ~ 0xffffffbfbdf80000 will not be removed because in
kasan_remove_pud_table(), kasan_pmd_table(*pud) is true but the next
address is 0xffffffbfbdf80000 which is not aligned to PUD_SIZE.
In the correct condition, this should fallback to the next level
kasan_remove_pmd_table() but the condition flow always continue to skip
the unaligned part.
Fix by correcting the condition when next and addr are neither aligned.
Link: https://lkml.kernel.org/r/20210103135621.83129-1-lecopzer@gmail.com
Fixes: 0207df4fa1a86 ("kernel/memremap, kasan: make ZONE_DEVICE with work with KASAN")
Signed-off-by: Lecopzer Chen <lecopzer.chen@mediatek.com>
Cc: Andrey Ryabinin <aryabinin@virtuozzo.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: YJ Chiang <yj.chiang@mediatek.com>
Cc: Andrey Konovalov <andreyknvl@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Pull irq fixes from Borislav Petkov:
- Fix a kernel panic in mips-cpu due to invalid irq domain hierarchy.
- Fix to not lose IPIs on bcm2836.
- Fix for a bogus marking of ITS devices as shared due to unitialized
stack variable.
- Clear a phantom interrupt on qcom-pdc to unblock suspend.
- Small cleanups, warning and build fixes.
* tag 'irq_urgent_for_v5.11_rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
genirq: Export irq_check_status_bit()
irqchip/mips-cpu: Set IPI domain parent chip
irqchip/pruss: Simplify the TI_PRUSS_INTC Kconfig
irqchip/loongson-liointc: Fix build warnings
driver core: platform: Add extra error check in devm_platform_get_irqs_affinity()
irqchip/bcm2836: Fix IPI acknowledgement after conversion to handle_percpu_devid_irq
irqchip/irq-sl28cpld: Convert comma to semicolon
genirq/msi: Initialize msi_alloc_info before calling msi_domain_prepare_irqs()
|
|
Pull objtool fixes from Borislav Petkov:
- Adjust objtool to handle a recent binutils change to not generate
unused symbols anymore.
- Revert the fail-the-build-on-fatal-errors objtool strategy for now
due to the ever-increasing matrix of supported toolchains/plugins and
them causing too many such fatal errors currently.
- Do not add empty symbols to objdump's rbtree to accommodate clang
removing section symbols.
* tag 'objtool_urgent_for_v5.11_rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
objtool: Don't fail on missing symbol table
objtool: Don't fail the kernel build on fatal errors
objtool: Don't add empty symbols to the rbtree
|
|
Pull scheduler fixes from Borislav Petkov:
- Correct the marking of kthreads which are supposed to run on a
specific, single CPU vs such which are affine to only one CPU, mark
per-cpu workqueue threads as such and make sure that marking
"survives" CPU hotplug. Fix CPU hotplug issues with such kthreads.
- A fix to not push away tasks on CPUs coming online.
- Have workqueue CPU hotplug code use cpu_possible_mask when breaking
affinity on CPU offlining so that pending workers can finish on newly
arrived onlined CPUs too.
- Dump tasks which haven't vacated a CPU which is currently being
unplugged.
- Register a special scale invariance callback which gets called on
resume from RAM to read out APERF/MPERF after resume and thus make
the schedutil scaling governor more precise.
* tag 'sched_urgent_for_v5.11_rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
sched: Relax the set_cpus_allowed_ptr() semantics
sched: Fix CPU hotplug / tighten is_per_cpu_kthread()
sched: Prepare to use balance_push in ttwu()
workqueue: Restrict affinity change to rescuer
workqueue: Tag bound workers with KTHREAD_IS_PER_CPU
kthread: Extract KTHREAD_IS_PER_CPU
sched: Don't run cpu-online with balance_push() enabled
workqueue: Use cpu_possible_mask instead of cpu_active_mask to break affinity
sched/core: Print out straggler tasks in sched_cpu_dying()
x86: PM: Register syscore_ops for scale invariance
|
|
Pull timer fixes from Borislav Petkov:
- Fix an integer overflow in the NTP RTC synchronization which led to
the latter happening every 2 seconds instead of the intended every 11
minutes.
- Get rid of now unused get_seconds().
* tag 'timers_urgent_for_v5.11_rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
ntp: Fix RTC synchronization on 32-bit platforms
timekeeping: Remove unused get_seconds()
|
|
Pull x86 fixes from Borislav Petkov:
- Add a new Intel model number for Alder Lake
- Differentiate which aspects of the FPU state get saved/restored when
the FPU is used in-kernel and fix a boot crash on K7 due to early
MXCSR access before CR4.OSFXSR is even set.
- A couple of noinstr annotation fixes
- Correct die ID setting on AMD for users of topology information which
need the correct die ID
- A SEV-ES fix to handle string port IO to/from kernel memory properly
* tag 'x86_urgent_for_v5.11_rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/cpu: Add another Alder Lake CPU to the Intel family
x86/mmx: Use KFPU_387 for MMX string operations
x86/fpu: Add kernel_fpu_begin_mask() to selectively initialize state
x86/topology: Make __max_die_per_package available unconditionally
x86: __always_inline __{rd,wr}msr()
x86/mce: Remove explicit/superfluous tracing
locking/lockdep: Avoid noinstr warning for DEBUG_LOCKDEP
locking/lockdep: Cure noinstr fail
x86/sev: Fix nonistr violation
x86/entry: Fix noinstr fail
x86/cpu/amd: Set __max_die_per_package on AMD
x86/sev-es: Handle string port IO to kernel memory properly
|
|
Pull powerpc fixes from Michael Ellerman:
- Fix a bad interaction between the scv handling and the fallback L1D
flush, which could lead to user register corruption. Only affects
people using scv (~no one) on machines with old firmware that are
missing the L1D flush.
- Two small selftest fixes.
Thanks to Eirik Fuller, Libor Pechacek, Nicholas Piggin, Sandipan Das,
and Tulio Magno Quites Machado Filho.
* tag 'powerpc-5.11-5' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
powerpc/64s: fix scv entry fallback flush vs interrupt
selftests/powerpc: Only test lwm/stmw on big endian
selftests/powerpc: Fix exit status of pkey tests
|
|
Pull misc fixes from Christian Brauner:
- Jann reported sparse complaints because of a missing __user
annotation in a helper we added way back when we added
pidfd_send_signal() to avoid compat syscall handling. Fix it.
- Yanfei replaces a reference in a comment to the _do_fork() helper I
removed a while ago with a reference to the new kernel_clone()
replacement
- Alexander Guril added a simple coding style fix
* tag 'for-linus-2021-01-24' of git://git.kernel.org/pub/scm/linux/kernel/git/brauner/linux:
kthread: remove comments about old _do_fork() helper
Kernel: fork.c: Fix coding style: Do not use {} around single-line statements
signal: Add missing __user annotation to copy_siginfo_from_user_any
|
|
Pull cifs fixes from Steve French:
"An important signal handling patch for stable, and two small cleanup
patches"
* tag '5.11-rc4-smb3' of git://git.samba.org/sfrench/cifs-2.6:
cifs: do not fail __smb_send_rqst if non-fatal signals are pending
fs/cifs: Simplify bool comparison.
fs/cifs: Assign boolean values to a bool variable
|
|
Currently the kernel is not correctly updating the numa stats for
NR_FILE_PAGES and NR_SHMEM on THP migration. Fix that.
For NR_FILE_DIRTY and NR_ZONE_WRITE_PENDING, although at the moment
there is no need to handle THP migration as kernel still does not have
write support for file THP but to be more future proof, this patch adds
the THP support for those stats as well.
Link: https://lkml.kernel.org/r/20210108155813.2914586-2-shakeelb@google.com
Fixes: e71769ae52609 ("mm: enable thp migration for shmem thp")
Signed-off-by: Shakeel Butt <shakeelb@google.com>
Acked-by: Yang Shi <shy828301@gmail.com>
Reviewed-by: Roman Gushchin <guro@fb.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Muchun Song <songmuchun@bytedance.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
The kernel updates the per-node NR_FILE_DIRTY stats on page migration
but not the memcg numa stats.
That was not an issue until recently the commit 5f9a4f4a7096 ("mm:
memcontrol: add the missing numa_stat interface for cgroup v2") exposed
numa stats for the memcg.
So fix the file_dirty per-memcg numa stat.
Link: https://lkml.kernel.org/r/20210108155813.2914586-1-shakeelb@google.com
Fixes: 5f9a4f4a7096 ("mm: memcontrol: add the missing numa_stat interface for cgroup v2")
Signed-off-by: Shakeel Butt <shakeelb@google.com>
Reviewed-by: Muchun Song <songmuchun@bytedance.com>
Acked-by: Yang Shi <shy828301@gmail.com>
Reviewed-by: Roman Gushchin <guro@fb.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
Lyude Paul
Alistair Popple
Ben Skeggs
Dave Airlie
Linus Torvalds
Nathan Chancellor
Xiaoming Ni
Thomas Gleixner
Dan Williams
Arnd Bergmann
Andrey Konovalov
Lecopzer Chen
Shakeel Butt