aboutsummaryrefslogtreecommitdiffstats
AgeCommit message (Collapse)AuthorFilesLines
2016-03-10staging/rdma/hfi1: Fix headerJubin John55-220/+55
Fix the header by moving the copyright notice out of the license text and to the top of the header. Also, update the copyright date. Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Jubin John <jubin.john@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-03-10staging/rdma/hfi1: Remove else after breakJubin John1-4/+2
Remove else after break to fix checkpatch warning: WARNING: else is not generally useful after a break or return Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Reviewed-by: Ira Weiny <ira.weiny@intel.com> Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by: Jubin John <jubin.john@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-03-10staging/rdma/hfi1: Add braces on all arms of statementJubin John14-78/+100
Add braces on all arms of statements to fix checkpatch check: CHECK: braces {} should be used on all arms of this statement Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Reviewed-by: Ira Weiny <ira.weiny@intel.com> Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by: Jubin John <jubin.john@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-03-10staging/rdma/hfi1: Fix code alignmentJubin John26-1597/+1508
Fix code alignment to fix checkpatch check: CHECK: Alignment should match open parenthesis Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Reviewed-by: Ira Weiny <ira.weiny@intel.com> Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by: Jubin John <jubin.john@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-03-10staging/rdma/hfi1: Fix block commentsJubin John14-107/+203
Fix block comments with proper formatting to fix checkpatch warnings: WARNING: Block comments use * on subsequent lines WARNING: Block comments use a trailing */ on a separate line Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Reviewed-by: Ira Weiny <ira.weiny@intel.com> Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by: Jubin John <jubin.john@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-03-10staging/rdma/hfi1: Add comment for spinlock_t definitionJubin John3-0/+5
Add comments describing the spinlock for spinlock_t definitions to fix checkpatch check: CHECK: spinlock_t definition without comment Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Reviewed-by: Ira Weiny <ira.weiny@intel.com> Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by: Jubin John <jubin.john@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-03-10staging/rdma/hfi1: Remove void function return statementJubin John1-1/+0
Remove return statement at the end of a void function to fix checkpatch warning: WARNING: void function return statements are not generally useful Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Reviewed-by: Ira Weiny <ira.weiny@intel.com> Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by: Jubin John <jubin.john@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-03-10staging/rdma/hfi1: Use pointer instead of struct nameJubin John1-1/+1
Use sizeof(*p) instead of sizeof(struct foo) to fix checkpatch check: CHECK: Prefer alloc(sizeof(*p)...) over alloc(sizeof(struct foo)...) Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Reviewed-by: Ira Weiny <ira.weiny@intel.com> Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by: Jubin John <jubin.john@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-03-10staging/rdma/hfi1: Remove CamelCaseJubin John1-1/+1
Remove CamelCase to fix checkpatch check: CHECK: Avoid CamelCase: <PLS_CONFIGPHY_ESTcOMM_LOCAL_COMPLETE> Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Reviewed-by: Ira Weiny <ira.weiny@intel.com> Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by: Jubin John <jubin.john@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-03-10staging/rdma/hfi1: Fix misspellingsJubin John3-3/+3
Fix misspelled word based on checkpatch check: CHECK: 'ffoo' may be misspelled - perhaps 'foo'? Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Reviewed-by: Ira Weiny <ira.weiny@intel.com> Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by: Jubin John <jubin.john@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-03-10staging/rdma/hfi1: Split multiple assignmentsJubin John3-7/+10
Split multiple assignments into individual assignments to fix checkpatch check: CHECK: multiple assignments should be avoided Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Reviewed-by: Ira Weiny <ira.weiny@intel.com> Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by: Jubin John <jubin.john@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-03-10staging/rdma/hfi1: Use BIT_ULL macroJubin John3-13/+13
Use BIT_ULL macro to fix checkpatch check: CHECK: Prefer using the BIT_ULL macro Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Reviewed-by: Ira Weiny <ira.weiny@intel.com> Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by: Jubin John <jubin.john@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-03-10staging/rdma/hfi1: Remove unnecessary parenthesesJubin John1-7/+7
Remove unnecessary parentheses around addressof single $Lvals to fix checkpatch check: CHECK: Unnecessary parentheses around $var Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Reviewed-by: Ira Weiny <ira.weiny@intel.com> Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by: Jubin John <jubin.john@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-03-10staging/rdma/hfi1: Add blank link after declarationsJubin John6-0/+8
Add blank line after declarations to fix checkpatch check: CHECK: Please use a blank line after function/struct/union/enum declarations Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Reviewed-by: Ira Weiny <ira.weiny@intel.com> Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by: Jubin John <jubin.john@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-03-10staging/rdma/hfi1: Fix logical continuationsJubin John7-61/+51
Move logical continuations to previous line to fix checkpatch check: CHECK: Logical continuations should be on the previous line Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Reviewed-by: Ira Weiny <ira.weiny@intel.com> Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by: Jubin John <jubin.john@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-03-10staging/rdma/hfi1: Remove blank line before close braceJubin John9-12/+0
Remove extra blank line before close brace to fix checkpatch check: CHECK: Blank lines aren't necessary before a close brace '}' Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Reviewed-by: Ira Weiny <ira.weiny@intel.com> Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by: Jubin John <jubin.john@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-03-10staging/rdma/hfi1: Remove blank line after an open braceJubin John6-15/+0
Remove blank line after an open brace to fix checkpatch check: CHECK: Blank lines aren't necessary after an open brace '{' Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Reviewed-by: Ira Weiny <ira.weiny@intel.com> Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by: Jubin John <jubin.john@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-03-10staging/rdma/hfi1: Fix comparison to NULLJubin John9-19/+19
Convert pointer comparisons to NULL to !pointer to fix checkpatch check: CHECK: Comparison to NULL could be written "!pointer" Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Reviewed-by: Ira Weiny <ira.weiny@intel.com> Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by: Jubin John <jubin.john@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-03-10staging/rdma/hfi1: Remove space after castJubin John15-64/+64
Remove the space after a cast to fix checkpatch check: CHECK: No space is necessary after a cast Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Reviewed-by: Ira Weiny <ira.weiny@intel.com> Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by: Jubin John <jubin.john@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-03-10staging/rdma/hfi1: Remove multiple blank linesJubin John18-41/+0
Remove multiple blank lines to fix checkpatch check: CHECK: Please don't use multiple blank lines Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Reviewed-by: Ira Weiny <ira.weiny@intel.com> Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by: Jubin John <jubin.john@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-03-10staging/rdma/hfi1: Add spaces around binary operatorsJubin John19-111/+111
Add spaces around binary operators. Fixes checkpatch check: CHECK: spaces preferred around that 'x' where x is a binary operator Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Reviewed-by: Ira Weiny <ira.weiny@intel.com> Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by: Jubin John <jubin.john@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-03-10staging/rdma/hfi1: add cq head and tail information to qpstatsVennila Megavannan1-2/+4
This enables debugging issues related to cq event signalling mechanism Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Vennila Megavannan <vennila.megavannan@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-03-10staging/rdma/hfi1: Add send context sw indexJubin John1-2/+3
Print the qp's send context sw index in the qpstats Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by: Jubin John <jubin.john@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-03-10staging/rdma/hfi1: Determine actual operational VLsMike Marciniszyn3-10/+32
Use shared credits and dedicated credits for each VL to determine the actual number of operational VLs. Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Jubin John <jubin.john@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-03-10staging/rdma/hfi1: Add qp to send context mapping for PIOJubin John8-19/+375
PIO send context mapping is changed from per-VL to QPN based. qp to send context mapping is done using a mapping infrastructure similar to the current vl to sdma engine mapping. Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by: Jubin John <jubin.john@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-03-10staging/rdma/hfi: fix CQ completion order issueMike Marciniszyn7-92/+65
The current implementation of the sdma_wait variable has a timing hole that can cause a completion Q entry to be returned from a pio send prior to an older sdma packets completion queue entry. The sdma_wait variable used to be decremented prior to calling the packet complete routine. The hole is between decrement and the verbs completion where send engine using pio could return a out of order completion in that window. This patch closes the hole by allowing an API option to specify an sdma_drained callback. The atomic dec is positioned after the complete callback to avoid the window as long as the pio path doesn't execute when there is a non-zero sdma count. Reviewed-by: Jubin John <jubin.john@intel.com> Signed-off-by: Dean Luick <dean.luick@intel.com> Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-03-10IB/qib, staging/rdma/hfi1, IB/rdmavt: progress selection changesMike Marciniszyn3-6/+14
The non-rdamvt versions of qib and hfi1 allow for a differing heuristic to override a schedule progress in favor of a direct call the the progress routine. This patch adds that for both drivers and rdmavt. Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-03-10staging/rdma/hfi1: Adaptive PIO for short messagesMike Marciniszyn14-60/+286
The change requires a new pio_busy field in the iowait structure to track the number of outstanding pios. The new counter together with the sdma counter serve as the basis for a packet by packet decision as to which egress mechanism to use. Since packets given to different egress mechanisms are not ordered, this scheme will preserve the order. The iowait drain/wait mechanisms are extended for a pio case. An additional qp wait flag is added for the PIO drain wait case. Currently the only pio wait is for buffers, so the no_bufs_available() routine name is changed to pio_wait() and a third argument is passed with one of the two pio wait flags to generalize the routine. A module parameter is added to hold a configurable threshold. For now, the module parameter is zero. A heuristic routine is added to return the func pointer of the proper egress routine to use. The heuristic is as follows: - SMI always uses pio - GSI,UD qps <= threshold use pio - UD qps > threadhold use sdma o No coordination with sdma is required because order is not required and this qp pio count is not maintained for UD - RC/UC ONLY packets <= threshold chose as follows: o If sdmas pending, use SDMA o Otherwise use pio and enable the pio tracking count at the time the pio buffer is allocated - RC/UC ONLY packets > threshold use SDMA o If pio's are pending the pio_wait with the new wait flag is called to delay for pios to drain The threshold is potentially reduced by the QP's mtu. The sc_buffer_alloc() has two additional args (a callback, a void *) which are exploited by the RC/UC cases to pass a new complete routine and a qp *. When the shadow ring completes the credit associated with a packet, the new complete routine is called. The verbs_pio_complete() will then decrement the busy count and trigger any drain waiters in qp destroy or reset. Reviewed-by: Jubin John <jubin.john@intel.com> Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-03-10staging/rdma/hfi1: use u8 for vl/slMike Marciniszyn1-2/+2
The use should match the universal container size. Reviewed-by: Ira Weiny <ira.weiny@intel.com> Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-03-10staging/rdma/hfi1: fix panic in send engineMike Marciniszyn8-46/+95
The send engine wasn't correctly handling pre-built packets, and worse, the pointer to a packet state's txreq wasn't initialized correctly. To fix: - all waiters need to save any prebuilt packets (smda waits already did) - the progress routine needs to handle a QPs prebuilt packet and initialize the txreq pointer properly To keep SDMA working, the dma send code needs to see if a packet has been built already. If not the code will build it. Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-03-10staging/rdma/hfi1: avoid passing pmtuMike Marciniszyn1-3/+3
It is in the qp. Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-03-10staging/rdma/hfi1: Add s_sendcontext priv fieldJubin John3-6/+17
s_sendcontext will be used to map the QPs to the send contexts for PIO. Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Jubin John <jubin.john@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-03-10staging/rdma/hfi1: remove s_rdma_mrMike Marciniszyn2-14/+6
It can be conveyed in the verbs_txreq. Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-03-10staging/rdma/hfi1: Remove header memcpy from sdma send path.Dennis Dalessandro8-104/+148
Instead of writing the header into a buffer then copying it into another buffer to be sent, remove that memcpy and instead build the header directly into the tx request that will be sent. Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by: Vennila Megavannan <vennila.megavannan@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-03-10staging/rdma/hfi1: move txreq header codeMike Marciniszyn8-188/+384
The patch separates the txreq defines into new files, one for verbs and one for sdma. The verbs_txreq implementation handles the setup and teardown of the txreq cache, so the register routine is changed to call the new init/exit routines. This patch allows for followup patches enhance the send engine. Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-03-10IB/rdmvt: close send engine struct holesMike Marciniszyn1-2/+2
pahole noted the wasted 4 bytes after s_lock and r_lock. Move s_flags and r_psn to fill the holes. Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-03-10staging/rdma/hfi1: add s_avail to qp_statsMike Marciniszyn1-1/+2
This diagnostic capability was missed in the dual lock series. Signed-off-by: Vennila Megavannan <vennila.megavannan@intel.com> Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-03-10IB/qib: Destroy SMI AH before de-allocating the protection domainHarish Chegondi2-2/+3
If SMI AH is not destroyed before de-allocating the PD, it would result in non-zero PD use count when de-allocating the PD, triggering a WARN_ON() at drivers/infiniband/core/verbs.c:284 ib_dealloc_pd+0x69/0xb0 [ib_core]() when unloading the qib driver on systems with dual-port card. This problem has always been there in qib and was detected only after the commit 7dd78647a2c2 ("IB/core: Make ib_dealloc_pd return void") introduced a WARN_ON in ib_dealloc_pd() that triggers if a PD's use count is non-zero before de-allocating the PD. Below is the call trace from the dmesg log. [ 7264.966129] Call Trace: [ 7264.969652] [<ffffffff81338470>] dump_stack+0x44/0x64 [ 7264.976181] [<ffffffff81086bb6>] warn_slowpath_common+0x86/0xc0 [ 7264.983656] [<ffffffff81086cfa>] warn_slowpath_null+0x1a/0x20 [ 7264.990961] [<ffffffffa025c2d9>] ib_dealloc_pd+0x69/0xb0 [ib_core] [ 7264.998717] [<ffffffffa0044de8>] ib_mad_port_close+0xb8/0x120 [ib_mad] [ 7265.006866] [<ffffffffa0044ebf>] ib_mad_remove_device+0x6f/0xc0 [ib_mad] [ 7265.015224] [<ffffffffa025fc87>] ib_unregister_device+0xa7/0x140 [ib_core] [ 7265.023738] [<ffffffffa04b5b79>] rvt_unregister_device+0x29/0x80 [rdmavt] [ 7265.032181] [<ffffffffa088d2a2>] qib_unregister_ib_device+0x22/0x210 [ib_qib] [ 7265.040993] [<ffffffffa085f73f>] qib_remove_one+0x1f/0x250 [ib_qib] [ 7265.048823] [<ffffffff8137a319>] pci_device_remove+0x39/0xc0 [ 7265.055984] [<ffffffff81466a1a>] __device_release_driver+0x9a/0x140 [ 7265.063821] [<ffffffff81466bc8>] driver_detach+0xb8/0xc0 [ 7265.070579] [<ffffffff81465a15>] bus_remove_driver+0x55/0xd0 [ 7265.077717] [<ffffffff8146732c>] driver_unregister+0x2c/0x50 [ 7265.084849] [<ffffffff813789ba>] pci_unregister_driver+0x2a/0x80 [ 7265.092366] [<ffffffffa08921bd>] qib_ib_cleanup+0x37/0x65 [ib_qib] [ 7265.100068] [<ffffffff811096d0>] SyS_delete_module+0x190/0x220 [ 7265.107379] [<ffffffff816a7bae>] entry_SYSCALL_64_fastpath+0x12/0x71 Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Harish Chegondi <harish.chegondi@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-03-10IB/rdmavt: Remove unnecessary exported functionsDennis Dalessandro7-155/+128
Remove exported functions which are no longer required as the functionality has moved into rdmavt. This also requires re-ordering some of the functions since their prototype no longer appears in a header file. Rather than add forward declarations it is just cleaner to re-order some of the functions. Reviewed-by: Jubin John <jubin.john@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-03-10IB/rdmavt: Remove signal_supported and commentsDennis Dalessandro1-18/+0
Initially it was intended that rdmavt would support some signaling between the underlying driver and itself. However this turned out to be unnecessary for qib and hfi1. If we need to add something like this in later to support another driver we should do it then. As of now this essentially dead code so remove it. Reviewed-by: Ira Weiny <ira.weiny@intel.com> Reviewed-by: Jubin John <jubin.john@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-03-10IB/rdmavt: Remove RVT_FLAGsDennis Dalessandro4-28/+0
While hfi1 and qib were still supporting bits and pieces of core verbs components there needed to be a way to convey if rdmavt should handle allocation and initialize of resources like the queue pair table. Now that all of this is moved into rdmavt there is no need for these flags. They are no longer used in the drivers. Reviewed-by: Ira Weiny <ira.weiny@intel.com> Reviewed-by: Jubin John <jubin.john@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-03-10IB/qib,rdmavt: Move smi_ah to qibDennis Dalessandro3-6/+6
Rdmavt adopted an smi_ah from qib which is not needed by hfi1. Move this back to qib and get it out of the common library. Reviewed-by: Ira Weiny <ira.weiny@intel.com> Reviewed-by: Jubin John <jubin.john@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-03-10IB/qib: Setup notify free/create mad agent callbacks for rdmavtDennis Dalessandro1-0/+4
Qib needs to be notified when mad agents are created and freed, there is some counter maintenance that needs to be performed. Add those callbacks at registration time with rdmavt. Reviewed-by: Ira Weiny <ira.weiny@intel.com> Reviewed-by: Jubin John <jubin.john@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-03-10IB/rdmavt: Add per verb driver callback checkingDennis Dalessandro2-75/+489
For each verb validate that all requirements for driver callbacks are met. If a function is called without checking for a valid pointer, it is a required function. Also document what each callback function does. Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-03-10IB/rdmavt: Clean up comments and add more documentationDennis Dalessandro11-78/+280
Add, remove, and otherwise clean up existing comments that are leftover from the initial code postings of rdmavt. Many of the comments were added to provide an idea on the direction we were thinking of going. Now that the design is solidified make a pass over and clean everything up. Also add details where lacking. Ensure all non static functions have nano comments. Reviewed-by: Jubin John <jubin.john@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-03-10staging/rdma/hfi1: Put QPs into error state after SL->SC table changesKaike Wan3-2/+64
If an SL->SC mapping table change occurs after an RC/UC QP is created, there is no mechanism to change the SC nor the VL for that QP. The fix is to place the QP into error state so that ULP can recreate the QP with the new SL->SC mapping. Reviewed-by: Ira Weiny <ira.weiny@intel.com> Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by: Kaike Wan <kaike.wan@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-03-10IB/rdmavt: Add trace and error print statements in post_one_wrHarish Chegondi2-1/+77
These trace and error print statements would help in debugging issues which are caused due to messed up QP ring buffer pointers. Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by: Harish Chegondi <harish.chegondi@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-03-10IB/qib, staging/rdma/hfi1: add s_hlock for use in post sendMike Marciniszyn18-221/+319
This patch adds an additional lock to reduce contention on the s_lock. This lock is used in post_send() so that the post_send is not serialized with the send engine and other send related processing. To do this the s_next_psn is now maintained on post_send() while post_send() related fields are moved to a new cache line. There is an s_avail maintained for the post_send() to mitigate trading cache lines with the send engine. The lock is released/acquired around releasing the just built packet to the egress mechanism. Reviewed-by: Jubin John <jubin.john@intel.com> Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Dean Luick <dean.luick@intel.com> Signed-off-by: Harish Chegondi <harish.chegondi@intel.com> Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by: Ira Weiny <ira.weiny@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-03-10IB/qib: Rename several functions by adding a "qib_" prefixHarish Chegondi4-39/+39
This would avoid conflict with the functions in hfi1 that have similar names when both qib and hfi1 drivers are configured to be built into the kernel. This issue came up in the 0-day build report. Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Harish Chegondi <harish.chegondi@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-03-10IB/rdmavt, staging/rdma/hfi1: use qps to dynamically scale timeout valueVennila Megavannan4-3/+32
A busy_jiffies variable is maintained and updated when rc qps are created and deleted. busy_jiffies is a scaled value of the number of rc qps in the device. busy_jiffies is incremented every rc qp scaling interval. busy_jiffies is added to the rc timeout in add_retry_timer and mod_retry_timer. The rc qp scaling interval is selected based on extensive performance evaluation of targeted workloads. Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by: Vennila Megavannan <vennila.megavannan@intel.com> Signed-off-by: Jubin John <jubin.john@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.