aboutsummaryrefslogtreecommitdiffstats
AgeCommit message (Collapse)AuthorFilesLines
2014-12-10rtc: pcf8563: save battery powerJan Kardell1-0/+16
According to Haoyu hym8563 datasheet this saves som power. Might be importat to battery life. And maybe it works for the NXP part as well. Signed-off-by: Jan Kardell <jan.kardell@telliq.com> Cc: Alessandro Zummo <a.zummo@towertech.it> Cc: Grant Likely <grant.likely@linaro.org> Cc: Rob Herring <robh+dt@kernel.org> Cc: Vincent Donnefort <vdonnefort@gmail.com> Cc: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-12-10rtc: pcf8563: handle consequeces of lacking second alarm regJan Kardell1-0/+11
To guarantee that a set alarm occurs in the future, the set alarm time is rounded up to the nearest minute. Also we cannot handle UIE as it requires second precision. Signed-off-by: Jan Kardell <jan.kardell@telliq.com> Cc: Alessandro Zummo <a.zummo@towertech.it> Cc: Grant Likely <grant.likely@linaro.org> Cc: Rob Herring <robh+dt@kernel.org> Cc: Vincent Donnefort <vdonnefort@gmail.com> Cc: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-12-10rtc: pcf8563: fix wrong time from read_alarmJan Kardell1-2/+2
Incorrect mask was used for hour and monthday fields. Signed-off-by: Jan Kardell <jan.kardell@telliq.com> Cc: Alessandro Zummo <a.zummo@towertech.it> Cc: Grant Likely <grant.likely@linaro.org> Cc: Rob Herring <robh+dt@kernel.org> Cc: Vincent Donnefort <vdonnefort@gmail.com> Cc: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-12-10rtc: pcf8563: fix write of invalid bits to ST2 regJan Kardell1-1/+2
The NXP datasheet says: "Bits labeled as N should always be written with logic 0." At least one of those bits is sometime read as a 1, therfore violating this rule. To fix this we mask away those bits. Signed-off-by: Jan Kardell <jan.kardell@telliq.com> Cc: Alessandro Zummo <a.zummo@towertech.it> Cc: Grant Likely <grant.likely@linaro.org> Cc: Rob Herring <robh+dt@kernel.org> Cc: Vincent Donnefort <vdonnefort@gmail.com> Cc: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-12-10rtc: pcf8563: remove leftover codeJan Kardell1-7/+6
Remove some code that was left from before block read/write was used. Signed-off-by: Jan Kardell <jan.kardell@telliq.com> Cc: Alessandro Zummo <a.zummo@towertech.it> Cc: Grant Likely <grant.likely@linaro.org> Cc: Rob Herring <robh+dt@kernel.org> Cc: Vincent Donnefort <vdonnefort@gmail.com> Cc: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-12-10ARM: dts: am335x-boneblack: enable power off and rtc wake upJohan Hovold1-0/+4
Configure the RTC as system-power controller, which allows the system to be powered off as well as woken up again on subsequent RTC alarms. Note that the PMIC needs to be put in SLEEP (rather than OFF) mode to maintain RTC power. Specifically, this means that the PMIC ti,pmic-shutdown-controller property must be left unset in order to be able to wake up on RTC alarms. Tested on BeagleBone Black (rev A5). Signed-off-by: Johan Hovold <johan@kernel.org> Reviewed-by: Felipe Balbi <balbi@ti.com> Tested-by: Felipe Balbi <balbi@ti.com> Cc: Alessandro Zummo <a.zummo@towertech.it> Cc: Tony Lindgren <tony@atomide.com> Cc: Benot Cousson <bcousson@baylibre.com> Cc: Lokesh Vutla <lokeshvutla@ti.com> Cc: Guenter Roeck <linux@roeck-us.net> Cc: Sekhar Nori <nsekhar@ti.com> Cc: Tero Kristo <t-kristo@ti.com> Cc: Keerthy J <j-keerthy@ti.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-12-10ARM: dts: am33xx: update rtc-node compatible propertyJohan Hovold1-1/+1
Enable am33xx specific RTC features (e.g. PMIC control) by adding "ti,am3352-rtc" to the compatible property of the rtc node. Signed-off-by: Johan Hovold <johan@kernel.org> Reviewed-by: Felipe Balbi <balbi@ti.com> Tested-by: Felipe Balbi <balbi@ti.com> Cc: Alessandro Zummo <a.zummo@towertech.it> Cc: Tony Lindgren <tony@atomide.com> Cc: Benot Cousson <bcousson@baylibre.com> Cc: Lokesh Vutla <lokeshvutla@ti.com> Cc: Guenter Roeck <linux@roeck-us.net> Cc: Sekhar Nori <nsekhar@ti.com> Cc: Tero Kristo <t-kristo@ti.com> Cc: Keerthy J <j-keerthy@ti.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-12-10rtc: omap: add copyright entryJohan Hovold1-0/+1
Add myself to the list of copyright holders. Signed-off-by: Johan Hovold <johan@kernel.org> Cc: Alessandro Zummo <a.zummo@towertech.it> Cc: Tony Lindgren <tony@atomide.com> Cc: Benot Cousson <bcousson@baylibre.com> Cc: Lokesh Vutla <lokeshvutla@ti.com> Cc: Guenter Roeck <linux@roeck-us.net> Cc: Sekhar Nori <nsekhar@ti.com> Cc: Tero Kristo <t-kristo@ti.com> Cc: Keerthy J <j-keerthy@ti.com> Tested-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-12-10rtc: omap: fix minor coding style issuesJohan Hovold1-19/+27
Fix minor coding style issues like comment style, indentation and remove a few unnecessary casts. Also drop the 1 from OMAP1 in the driver description. Signed-off-by: Johan Hovold <johan@kernel.org> Cc: Alessandro Zummo <a.zummo@towertech.it> Cc: Tony Lindgren <tony@atomide.com> Cc: Benot Cousson <bcousson@baylibre.com> Cc: Lokesh Vutla <lokeshvutla@ti.com> Cc: Guenter Roeck <linux@roeck-us.net> Cc: Sekhar Nori <nsekhar@ti.com> Cc: Tero Kristo <t-kristo@ti.com> Cc: Keerthy J <j-keerthy@ti.com> Tested-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-12-10rtc: omap: enable wake-up from power offJohan Hovold1-1/+8
The ALARM interrupt must not be disabled during shutdown in order to be able to power up the system using an RTC alarm. Signed-off-by: Johan Hovold <johan@kernel.org> Cc: Alessandro Zummo <a.zummo@towertech.it> Cc: Tony Lindgren <tony@atomide.com> Cc: Benot Cousson <bcousson@baylibre.com> Cc: Lokesh Vutla <lokeshvutla@ti.com> Cc: Guenter Roeck <linux@roeck-us.net> Cc: Sekhar Nori <nsekhar@ti.com> Cc: Tero Kristo <t-kristo@ti.com> Cc: Keerthy J <j-keerthy@ti.com> Tested-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-12-10rtc: omap: add support for pmic_power_enJohan Hovold2-1/+108
Add new property "ti,system-power-controller" to register the RTC as a power-off handler. Some RTC IP revisions can control an external PMIC via the pmic_power_en pin, which can be configured to transition to OFF on ALARM2 events and back to ON on subsequent ALARM (wakealarm) events. This is based on earlier work by Colin Foe-Parker and AnilKumar Ch. [1] [1] https://www.mail-archive.com/linux-omap@vger.kernel.org/msg82127.html [akpm@linux-foundation.org: add comment] Signed-off-by: Johan Hovold <johan@kernel.org> Cc: Colin Foe-Parker <colin.foeparker@logicpd.com> Cc: AnilKumar Ch <anilkumar@ti.com> Cc: Alessandro Zummo <a.zummo@towertech.it> Cc: Tony Lindgren <tony@atomide.com> Cc: Benot Cousson <bcousson@baylibre.com> Cc: Lokesh Vutla <lokeshvutla@ti.com> Cc: Guenter Roeck <linux@roeck-us.net> Cc: Sekhar Nori <nsekhar@ti.com> Cc: Tero Kristo <t-kristo@ti.com> Cc: Keerthy J <j-keerthy@ti.com> Tested-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-12-10rtc: omap: add helper to read 32-bit registersJohan Hovold1-0/+5
Add helper to read full register width. Signed-off-by: Johan Hovold <johan@kernel.org> Cc: Alessandro Zummo <a.zummo@towertech.it> Cc: Tony Lindgren <tony@atomide.com> Cc: Benot Cousson <bcousson@baylibre.com> Cc: Lokesh Vutla <lokeshvutla@ti.com> Cc: Guenter Roeck <linux@roeck-us.net> Cc: Sekhar Nori <nsekhar@ti.com> Cc: Tero Kristo <t-kristo@ti.com> Cc: Keerthy J <j-keerthy@ti.com> Tested-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-12-10rtc: omap: add helper to read raw bcd timeJohan Hovold1-8/+10
Add helper to read raw BCD time that can be used in interrupt context. Signed-off-by: Johan Hovold <johan@kernel.org> Cc: Alessandro Zummo <a.zummo@towertech.it> Cc: Tony Lindgren <tony@atomide.com> Cc: Benot Cousson <bcousson@baylibre.com> Cc: Lokesh Vutla <lokeshvutla@ti.com> Cc: Guenter Roeck <linux@roeck-us.net> Cc: Sekhar Nori <nsekhar@ti.com> Cc: Tero Kristo <t-kristo@ti.com> Cc: Keerthy J <j-keerthy@ti.com> Tested-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-12-10rtc: omap: silence bogus power-up reset message at probeJohan Hovold1-6/+13
Some legacy RTC IP revisions has a power-up reset flag in the status register that later revisions lack. As this flag is always read back as set on later revisions (or is overloaded with a different flag), make sure to only clear the flag and print the info message on legacy platforms. Signed-off-by: Johan Hovold <johan@kernel.org> Cc: Alessandro Zummo <a.zummo@towertech.it> Cc: Tony Lindgren <tony@atomide.com> Cc: Benot Cousson <bcousson@baylibre.com> Cc: Lokesh Vutla <lokeshvutla@ti.com> Cc: Guenter Roeck <linux@roeck-us.net> Cc: Sekhar Nori <nsekhar@ti.com> Cc: Tero Kristo <t-kristo@ti.com> Cc: Keerthy J <j-keerthy@ti.com> Tested-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-12-10rtc: omap: add structured device-type infoJohan Hovold1-52/+51
Add structured device-type info to encode IP-block revision differences. Signed-off-by: Johan Hovold <johan@kernel.org> Cc: Alessandro Zummo <a.zummo@towertech.it> Cc: Tony Lindgren <tony@atomide.com> Cc: Benot Cousson <bcousson@baylibre.com> Cc: Lokesh Vutla <lokeshvutla@ti.com> Cc: Guenter Roeck <linux@roeck-us.net> Cc: Sekhar Nori <nsekhar@ti.com> Cc: Tero Kristo <t-kristo@ti.com> Cc: Keerthy J <j-keerthy@ti.com> Tested-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-12-10rtc: omap: remove DRIVER_NAME macroJohan Hovold1-5/+3
Remove DRIVER_NAME macro which was used for unrelated strings (e.g. id-table entry and module name), but not for related ones (e.g. module name and alias). Also move the module alias to the other module-info entries. Signed-off-by: Johan Hovold <johan@kernel.org> Cc: Alessandro Zummo <a.zummo@towertech.it> Cc: Tony Lindgren <tony@atomide.com> Cc: Benot Cousson <bcousson@baylibre.com> Cc: Lokesh Vutla <lokeshvutla@ti.com> Cc: Guenter Roeck <linux@roeck-us.net> Cc: Sekhar Nori <nsekhar@ti.com> Cc: Tero Kristo <t-kristo@ti.com> Tested-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-12-10rtc: omap: add device abstractionJohan Hovold1-106/+133
Add struct omap_rtc to hold previously global data as well as the IP-block feature flags. Also convert the register-access macros to proper inline helper functions. Signed-off-by: Johan Hovold <johan@kernel.org> Cc: Alessandro Zummo <a.zummo@towertech.it> Cc: Tony Lindgren <tony@atomide.com> Cc: Benot Cousson <bcousson@baylibre.com> Cc: Lokesh Vutla <lokeshvutla@ti.com> Cc: Guenter Roeck <linux@roeck-us.net> Cc: Sekhar Nori <nsekhar@ti.com> Cc: Tero Kristo <t-kristo@ti.com> Cc: Keerthy J <j-keerthy@ti.com> Tested-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-12-10rtc: omap: make platform-device id table constJohan Hovold1-1/+1
Make platform-device id table const. Signed-off-by: Johan Hovold <johan@kernel.org> Cc: Alessandro Zummo <a.zummo@towertech.it> Cc: Tony Lindgren <tony@atomide.com> Cc: Benot Cousson <bcousson@baylibre.com> Cc: Lokesh Vutla <lokeshvutla@ti.com> Cc: Guenter Roeck <linux@roeck-us.net> Cc: Sekhar Nori <nsekhar@ti.com> Cc: Tero Kristo <t-kristo@ti.com> Cc: Keerthy J <j-keerthy@ti.com> Tested-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-12-10rtc: omap: use dev_infoJohan Hovold1-4/+3
Use dev_info rather than pr_info. Signed-off-by: Johan Hovold <johan@kernel.org> Cc: Alessandro Zummo <a.zummo@towertech.it> Cc: Tony Lindgren <tony@atomide.com> Cc: Benot Cousson <bcousson@baylibre.com> Cc: Lokesh Vutla <lokeshvutla@ti.com> Cc: Guenter Roeck <linux@roeck-us.net> Cc: Sekhar Nori <nsekhar@ti.com> Cc: Tero Kristo <t-kristo@ti.com> Cc: Keerthy J <j-keerthy@ti.com> Tested-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-12-10rtc: omap: remove unused register-base defineJohan Hovold1-2/+0
Remove register-base define, which is no longer used. Signed-off-by: Johan Hovold <johan@kernel.org> Cc: Alessandro Zummo <a.zummo@towertech.it> Cc: Tony Lindgren <tony@atomide.com> Cc: Benot Cousson <bcousson@baylibre.com> Cc: Lokesh Vutla <lokeshvutla@ti.com> Cc: Guenter Roeck <linux@roeck-us.net> Cc: Sekhar Nori <nsekhar@ti.com> Cc: Tero Kristo <t-kristo@ti.com> Cc: Keerthy J <j-keerthy@ti.com> Tested-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-12-10rtc: omap: fix class-device registrationJohan Hovold1-23/+23
Make sure not to register the class device until after the device has been configured. Currently, the device is not fully configured (e.g. 24-hour mode) when the class device is registered, something which involves driver callbacks for example to read the current time. Signed-off-by: Johan Hovold <johan@kernel.org> Cc: Alessandro Zummo <a.zummo@towertech.it> Cc: Tony Lindgren <tony@atomide.com> Cc: Benot Cousson <bcousson@baylibre.com> Cc: Lokesh Vutla <lokeshvutla@ti.com> Cc: Guenter Roeck <linux@roeck-us.net> Cc: Sekhar Nori <nsekhar@ti.com> Cc: Tero Kristo <t-kristo@ti.com> Cc: Keerthy J <j-keerthy@ti.com> Tested-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-12-10rtc: omap: clean up probe error handlingJohan Hovold1-23/+18
Remove some debug messages and return errors from subsystems rather than always fail with -EIO. Note that the class-registration error has already been logged by rtc core. Signed-off-by: Johan Hovold <johan@kernel.org> Cc: Alessandro Zummo <a.zummo@towertech.it> Cc: Tony Lindgren <tony@atomide.com> Cc: Benot Cousson <bcousson@baylibre.com> Cc: Lokesh Vutla <lokeshvutla@ti.com> Cc: Guenter Roeck <linux@roeck-us.net> Cc: Sekhar Nori <nsekhar@ti.com> Cc: Tero Kristo <t-kristo@ti.com> Cc: Keerthy J <j-keerthy@ti.com> Tested-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-12-10rtc: omap: fix interrupt disable at probeJohan Hovold1-3/+5
Use writel instead of writeb when disabling interrupts at probe as ALARM2 is not cleared otherwise on some IP-block revisions (e.g. AM3352). Note that the driver currently never enables the ALARM2 interrupt. Signed-off-by: Johan Hovold <johan@kernel.org> Cc: Alessandro Zummo <a.zummo@towertech.it> Cc: Tony Lindgren <tony@atomide.com> Cc: Benot Cousson <bcousson@baylibre.com> Cc: Lokesh Vutla <lokeshvutla@ti.com> Cc: Guenter Roeck <linux@roeck-us.net> Cc: Sekhar Nori <nsekhar@ti.com> Cc: Tero Kristo <t-kristo@ti.com> Cc: Keerthy J <j-keerthy@ti.com> Tested-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-12-10rtc: omap: fix missing wakealarm attributeJohan Hovold1-2/+3
The platform device must be registered as wakeup capable before registering the class device, or the wakealarm attribute will not be created. Also make sure to unregister the wakeup source on probe errors. Fixes: 1d2e2b65d098 ("rtc: omap: restore back (hard-code) wakeup support") Signed-off-by: Johan Hovold <johan@kernel.org> Reviewed-by: Felipe Balbi <balbi@ti.com> Tested-by: Felipe Balbi <balbi@ti.com> Cc: Alessandro Zummo <a.zummo@towertech.it> Cc: Tony Lindgren <tony@atomide.com> Cc: Benot Cousson <bcousson@baylibre.com> Cc: Lokesh Vutla <lokeshvutla@ti.com> Cc: Guenter Roeck <linux@roeck-us.net> Cc: Sekhar Nori <nsekhar@ti.com> Cc: Tero Kristo <t-kristo@ti.com> Cc: Keerthy J <j-keerthy@ti.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-12-10rtc: omap: fix clock-source configurationJohan Hovold1-2/+4
This series fixes a few issues with the omap rtc-driver, cleans up a bit, adds device abstraction, and finally adds support for the PMIC control feature found in some revisions of this RTC IP block. Ultimately, this allows for powering off the Beaglebone and waking it up again on RTC alarms. This patch (of 20): Make sure not to reset the clock-source configuration when enabling the 32kHz clock mux. Until the clock source can be configured through device tree we must not overwrite settings made by the bootloader (e.g. clock-source selection). Fixes: cd914bba03d8 ("drivers/rtc/rtc-omap.c: add support for enabling 32khz clock") Signed-off-by: Johan Hovold <johan@kernel.org> Reviewed-by: Felipe Balbi <balbi@ti.com> Tested-by: Felipe Balbi <balbi@ti.com> Cc: Alessandro Zummo <a.zummo@towertech.it> Cc: Tony Lindgren <tony@atomide.com> Cc: Benot Cousson <bcousson@baylibre.com> Cc: Lokesh Vutla <lokeshvutla@ti.com> Cc: Guenter Roeck <linux@roeck-us.net> Cc: Sekhar Nori <nsekhar@ti.com> Cc: Tero Kristo <t-kristo@ti.com> Cc: Keerthy J <j-keerthy@ti.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-12-10drivers/rtc/interface.c: check the validation of rtc_time in __rtc_read_timeHyogi Gim1-0/+8
Some rtc devices always return '0' when rtc_class_ops.read_time is called. So if rtc_time isn't verified in callback, rtc interface cannot know whether rtc_time is valid. Check rtc_time by using 'rtc_valid_tm' in '__rtc_read_time'. And add the message for debugging. Signed-off-by: Hyogi Gim <hyogi.gim@lge.com> Cc: Alessandro Zummo <a.zummo@towertech.it> Cc: John Stultz <john.stultz@linaro.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-12-10drivers/rtc/rtc-sirfsoc.c: move hardware initilization earlier in probeGuo Zeng1-8/+8
Move rtc register to be later than hardware initialization. The reason is that devm_rtc_device_register() will do read_time() which is a callback accessing hardware. This sometimes causes a hang in the hardware related callback. Signed-off-by: Guo Zeng <guo.zeng@csr.com> Signed-off-by: Barry Song <Baohua.Song@csr.com> Cc: Alessandro Zummo <a.zummo@towertech.it> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-12-10ncpfs: return proper error from NCP_IOC_SETROOT ioctlJan Kara1-1/+0
If some error happens in NCP_IOC_SETROOT ioctl, the appropriate error return value is then (in most cases) just overwritten before we return. This can result in reporting success to userspace although error happened. This bug was introduced by commit 2e54eb96e2c8 ("BKL: Remove BKL from ncpfs"). Propagate the errors correctly. Coverity id: 1226925. Fixes: 2e54eb96e2c80 ("BKL: Remove BKL from ncpfs") Signed-off-by: Jan Kara <jack@suse.cz> Cc: Petr Vandrovec <petr@vandrovec.name> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-12-10init: allow CONFIG_INIT_FALLBACK=n to disable defaults if init= failsAndy Lutomirski2-1/+22
If a user puts init=/whatever on the command line and /whatever can't be run, then the kernel will try a few default options before giving up. If init=/whatever came from a bootloader prompt, then this is unexpected but probably harmless. On the other hand, if it comes from a script (e.g. a tool like virtme or perhaps a future kselftest script), then the fallbacks are likely to exist, but they'll do the wrong thing. For example, they might unexpectedly invoke systemd. This adds a config option CONFIG_INIT_FALLBACK. If unset, then a failure to run the specified init= process be fatal. The tentative plan is to remove CONFIG_INIT_FALLBACK for 3.20. [akpm@linux-foundation.org: coding-style fixes] Signed-off-by: Andy Lutomirski <luto@amacapital.net> Cc: Rob Landley <rob@landley.net> Cc: Chuck Ebbert <cebbert.lkml@gmail.com> Cc: Randy Dunlap <rdunlap@infradead.org> Cc: Shuah Khan <shuah.kh@samsung.com> Cc: Frank Rowand <frowand.list@gmail.com> Cc: Josh Triplett <josh@joshtriplett.org> Acked-by: Rusty Russell <rusty@rustcorp.com.au> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-12-10fs/binfmt_elf.c: fix internal inconsistency relating to vma dump sizeJungseung Lee1-18/+22
vma_dump_size() has been used several times on actual dumper and it is supposed to return the same value for the same vma. But vma_dump_size() could return different values for same vma. The known problem case is concurrent shared memory removal. If a vma is used for a shared memory and that shared memory is removed between writing program header and dumping vma memory, this will result in a dump file which is internally consistent. To fix the problem, we set baseline to get dump size and store the size into vma_filesz and always use the same vma dump size which is stored in vma_filsz. The consistnecy with reality is not actually guranteed, but it's tolerable since that is fully consistent with base line. Signed-off-by: Jungseung Lee <js07.lee@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-12-10fs/binfmt_misc.c: use GFP_KERNEL instead of GFP_USERAndrew Morton1-2/+2
GFP_USER means "honour cpuset nodes-allowed beancounting". These are regular old kernel objects and there seems no reason to give them this treatment. Acked-by: Mike Frysinger <vapier@gentoo.org> Cc: Joe Perches <joe@perches.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-12-10binfmt_misc: clean up code style a bitMike Frysinger1-148/+145
Clean up various coding style issues that checkpatch complains about. No functional changes here. Signed-off-by: Mike Frysinger <vapier@gentoo.org> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Joe Perches <joe@perches.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-12-10binfmt_misc: add comments & debug logsMike Frysinger1-15/+121
When trying to develop a custom format handler, the errors returned all effectively get bucketed as EINVAL with no kernel messages. The other errors (ENOMEM/EFAULT) are internal/obvious and basic. Thus any time a bad handler is rejected, the developer has to walk the dense code and try to guess where it went wrong. Needing to dive into kernel code is itself a fairly high barrier for a lot of people. To improve this situation, let's deploy extensive pr_debug markers at logical parse points, and add comments to the dense parsing logic. It let's you see exactly where the parsing aborts, the string the kernel received (useful when dealing with shell code), how it translated the buffers to binary data, and how it will apply the mask at runtime. Some example output: $ echo ':qemu-foo:M::\x7fELF\xAD\xAD\x01\x00:\xff\xff\xff\xff\xff\x00\xff\x00:/usr/bin/qemu-foo:POC' > register $ dmesg binfmt_misc: register: received 92 bytes binfmt_misc: register: delim: 0x3a {:} binfmt_misc: register: name: {qemu-foo} binfmt_misc: register: type: M (magic) binfmt_misc: register: offset: 0x0 binfmt_misc: register: magic[raw]: 5c 78 37 66 45 4c 46 5c 78 41 44 5c 78 41 44 5c \x7fELF\xAD\xAD\ binfmt_misc: register: magic[raw]: 78 30 31 5c 78 30 30 00 x01\x00. binfmt_misc: register: mask[raw]: 5c 78 66 66 5c 78 66 66 5c 78 66 66 5c 78 66 66 \xff\xff\xff\xff binfmt_misc: register: mask[raw]: 5c 78 66 66 5c 78 30 30 5c 78 66 66 5c 78 30 30 \xff\x00\xff\x00 binfmt_misc: register: mask[raw]: 00 . binfmt_misc: register: magic/mask length: 8 binfmt_misc: register: magic[decoded]: 7f 45 4c 46 ad ad 01 00 .ELF.... binfmt_misc: register: mask[decoded]: ff ff ff ff ff 00 ff 00 ........ binfmt_misc: register: magic[masked]: 7f 45 4c 46 ad 00 01 00 .ELF.... binfmt_misc: register: interpreter: {/usr/bin/qemu-foo} binfmt_misc: register: flag: P (preserve argv0) binfmt_misc: register: flag: O (open binary) binfmt_misc: register: flag: C (preserve creds) The [raw] lines show us exactly what was received from userspace. The lines after that show us how the kernel has decoded things. Signed-off-by: Mike Frysinger <vapier@gentoo.org> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Joe Perches <joe@perches.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-12-10checkpatch: add ability to --fix (coalesce) string fragments on multiple linesJoe Perches1-46/+69
Add --fix option to coalesce string fragments. This does not coalesce string fragments that have newline terminations or are otherwise exempted. Other miscellanea: o move all the string tests together. o fix get_quoted_string function for tab characters o fix concatination typo Signed-off-by: Joe Perches <joe@perches.com> Cc: Andy Whitcroft <apw@canonical.com> Cc: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-12-10checkpatch: add --strict "pointer comparison to NULL" testJoe Perches1-0/+14
It seems there are more and more uses of "if (!ptr)" in preference to "if (ptr == NULL)" so add a --strict test to emit a message when using the latter form. This also finds (ptr != NULL). Fix it too if desired. Signed-off-by: Joe Perches <joe@perches.com> Cc: Dan Carpenter <dan.carpenter@oracle.com> Cc: Greg KH <gregkh@linuxfoundation.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-12-10checkpatch: add test for consecutive string fragmentsJoe Perches1-0/+6
Emit a warning when single line string coalescing occurs. Code that uses compiler string concatenation on a single line like: printk("foo" "bar"); is generally better to read concatenated like: printk("foobar"); Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-12-10checkpatch: add --strict preference for #defines using BIT(foo)Joe Perches1-0/+11
Using BIT(foo) and BIT_ULL(bar) is more common now. Suggest using these macros over #defines with 1<<value. Add a --fix option too. Signed-off-by: Joe Perches <joe@perches.com> Cc: David Miller <davem@davemloft.net> Cc: Jiri Pirko <jiri@resnulli.us> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-12-10checkpatch: allow certain SI units with three charactersJulius Werner1-1/+3
Checkpatch flags CamelCase identifiers in strict mode, but it has a feature to ignore parts with only two characters to allow for SI units like mV or uA. Unfortunately, not all SI units fit in two characters, and not all are lower case followed by upper case. This patch adds hardcoded detection for frequency and 1024-based size units (Hz/KHz/MHz/GHz/THz and KiB/MiB/GiB/TiB), since allowing any three character combinations might be too lenient. The list can later be expanded as needed. Signed-off-by: Julius Werner <jwerner@chromium.org> Acked-by: Joe Perches <joe@perches.com> Cc: Andy Whitcroft <apw@canonical.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-12-10checkpatch: Add --strict test for function pointer calling styleJoe Perches1-3/+21
Peter Hurley wrote: The use of older function ptr calling style, (*fn)(), makes static analysis more error-prone; replace with modern fn() style. So make checkpatch emit a --strict test for that condition. Update the unnecessary parentheses test for dereferencing objects at the same time and create a $fix mechanism too. Signed-off-by: Joe Perches <joe@perches.com> Cc: Peter Hurley <peter@hurleysoftware.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-12-10checkpatch: reduce MAINTAINERS update message frequencyJoe Perches1-0/+6
When files are being added/moved/deleted and a patch contains an update to the MAINTAINERS file, assume it's to update the MAINTAINERS file correctly and do not emit the "does MAINTAINERS need updating?" message. Reported by many people. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-12-10checkpatch: try to avoid mask and shift errorsJoe Perches1-0/+8
Shift has a higher precedence that mask so warn when a mask then shift operation is done without parentheses around the mask. This test works well for a right shift, but the left shift is pretty commonly done correctly so only warn on the right shift. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-12-10checkpatch: fix use via symlink, make missing spelling file non-fatalJoe Perches1-17/+21
Commit 66b47b4a9dad ("checkpatch: look for common misspellings") made it difficult to use checkpatch via a symlink. Fix that and make a missing spelling.txt file non-fatal. Emit a warning when the spelling.txt file can not be opened. Reference: http://xkcd.com/1172/ Signed-off-by: Joe Perches <joe@perches.com> Reported-by: Jani Nikula <jani.nikula@intel.com> Tested-by: Jani Nikula <jani.nikula@intel.com> Reviewed-by: Kees Cook <keescook@chromium.org> Acked-by: Andy Whitcroft <apw@canonical.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-12-10checkpatch: improve warning message for "needless if" caseFabio Estevam1-1/+1
Add an 'and' to the sentence so that it looks better: WARNING: debugfs_remove(NULL) is safe and this check is probably not required Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Cc: Joe Perches <joe@perches.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-12-10checkpatch: improve test for no space after castJoe Perches1-1/+2
sizeof(foo) is not a cast, allow a space after it. Signed-off-by: Joe Perches <joe@perches.com> Tested-by: Kalle Valo <kvalo@qca.qualcomm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-12-10checkpatch: add error on use of attribute((weak)) or __weak declarationsJoe Perches1-0/+9
Using weak declarations can have unintended link defects. The __weak on the declaration causes non-weak definitions to become weak. Emit an error on its use. Signed-off-by: Joe Perches <joe@perches.com> Reported-by: Bjorn Helgaas <bhelgaas@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-12-10checkpatch: add an error test for no space before commaJoe Perches1-2/+21
Using code like: int foo , bar; is not preferred to: int foo, bar; so emit an error on this style. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-12-10lib/lcm.c: lcm(n,0)=lcm(0,n) is 0, not nRasmus Villemoes1-4/+2
Return the mathematically correct answer when an argument is 0. Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk> Cc: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-12-10lib/lcm.c: ensure correct result whenever it fitsRasmus Villemoes1-1/+1
Ensure that lcm(a,b) returns the mathematically correct result, provided it fits in an unsigned long. The current version returns garbage if a*b overflows, even if the final result would fit. Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk> Cc: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-12-10MAINTAINERS: update ivtv mailing lists as subscriber-onlyJoe Perches1-2/+2
Mark these as subscriber-only mailing lists. Signed-off-by: Joe Perches <joe@perches.com> Cc: Andy Walls <awalls@md.metrocast.net> Cc: Mauro Carvalho Chehab <mchehab@infradead.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-12-10printk: drop logbuf_cpu volatile qualifierAlex Elder1-1/+1
Pranith Kumar posted a patch in which removed the "volatile" qualifier for the "logbuf_cpu" variable in vprintk_emit(). https://lkml.org/lkml/2014/11/13/894 In his patch, he used ACCESS_ONCE() for all references to that symbol to provide whatever protection was intended. There was some discussion that followed, and in the end Steven Rostedt concluded that not only was "volatile" not needed, neither was it required to use ACCESS_ONCE(). I offered an elaborate description that concluded Steven was right, and Pranith asked me to submit an alternative patch. And this is it. The basic reason "volatile" is not needed is that "logbuf_cpu" has static storage duration, and vprintk_emit() is an exported interface. This means that the value of logbuf_cpu must be read from memory the first time it is used in a particular call of vprintk_emit(). The variable's value is read only once in that function, when it's read it'll be the copy from memory (or cache). In addition, the value of "logbuf_cpu" is only ever written under protection of a spinlock. So the value that is read is the "real" value (and not an out-of-date cached one). If its value is not UINT_MAX, it is the current CPU's processor id, and it will have been last written by the running CPU. Signed-off-by: Alex Elder <elder@linaro.org> Reported-by: Pranith Kumar <bobby.prani@gmail.com> Suggested-by: Steven Rostedt <rostedt@goodmis.org> Reviewed-by: Jan Kara <jack@suse.cz> Cc: Petr Mladek <pmladek@suse.cz> Cc: Luis R. Rodriguez <mcgrof@suse.com> Cc: Joe Perches <joe@perches.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.