aboutsummaryrefslogtreecommitdiffstats
AgeCommit message (Collapse)AuthorFilesLines
2019-10-02net: dsa: sja1105: Rename sja1105_spi_send_packed_buf to sja1105_xfer_bufVladimir Oltean7-88/+69
The most commonly called function in the driver is long due for a rename. The "packed" word is redundant (it doesn't make sense to transfer an unpacked structure, since that is in CPU endianness yadda yadda), and the "spi" word is also redundant since argument 2 of the function is SPI_READ or SPI_WRITE. As for the sja1105_spi_send_long_packed_buf function, it is only being used from sja1105_spi.c, so remove its global prototype. Signed-off-by: Vladimir Oltean <olteanv@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-10-02net: dsa: sja1105: Replace sja1105_spi_send_int with sja1105_xfer_{u32, u64}Vladimir Oltean4-32/+47
Having a function that takes a variable number of unpacked bytes which it generically calls an "int" is confusing and makes auditing patches next to impossible. We only use spi_send_int with the int sizes of 32 and 64 bits. So just make the spi_send_int function less generic and replace it with the appropriate two explicit functions, which can now type-check the int pointer type. Note that there is still a small weirdness in the u32 function, which has to convert it to a u64 temporary. This is because of how the packing API works at the moment, but the weirdness is at least hidden from callers of sja1105_xfer_u32 now. Suggested-by: David S. Miller <davem@davemloft.net> Signed-off-by: Vladimir Oltean <olteanv@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-10-02net: dsa: sja1105: Don't use "inline" function declarations in C filesVladimir Oltean2-5/+4
Let the compiler decide. Signed-off-by: Vladimir Oltean <olteanv@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-10-02Merge branch 'SMB-rootfs'David S. Miller2-2/+57
Paulo Alcantara says: ==================== Experimental SMB rootfs support This patch series enables Linux to mount root file systems over the network by utilizing SMB protocol. Upstream commit 8eecd1c2e5bc ("cifs: Add support for root file systems") introduced a new CONFIG_CIFS_ROOT option, a virtual device (Root_CIFS) and a kernel cmdline parameter "cifsroot=" which tells the kernel to actually mount the root filesystem over a SMB share. The feature relies on ipconfig to set up the network prior to mounting the rootfs, so when it is set along with "cifsroot=" parameter: (1) cifs_root_setup() parses all necessary data out of "cifsroot=" parameter for the init process know how to mount the SMB rootfs (e.g. SMB server address, mount options). (2) If DHCP failed for some reason in ipconfig, we keep retrying forever as we have nowhere to go for NFS or SMB root filesystems (see PATCH 2/2). Otherwise go to (3). (3) mount_cifs_root() is then called by mount_root() (ROOT_DEV == Root_CIFS), retrieves early parsed data from (1), then attempt to mount SMB rootfs by CIFSROOT_RETRY_MAX times at most (see PATCH 1/2). (4) If all attempts failed, fall back to floppy drive, otherwise continue the boot process with rootfs mounted over a SMB share. My idea was to keep the same behavior of nfsroot - as it seems to work for most users so far. For more information on how this feature works, see Documentation/filesystems/cifs/cifsroot.txt. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2019-10-02ipconfig: Handle CONFIG_CIFS_ROOT optionPaulo Alcantara (SUSE)1-2/+8
The experimental root file system support in cifs.ko relies on ipconfig to set up the network stack and then accessing the SMB share that contains the rootfs files. Signed-off-by: Paulo Alcantara (SUSE) <pc@cjr.nz> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-10-02init: Support mounting root file systems over SMBPaulo Alcantara (SUSE)1-0/+49
Add a new virtual device named /dev/cifs (0xfe) to tell the kernel to mount the root file system over the network by using SMB protocol. cifs_root_data() will be responsible to retrieve the parsed information of the new command-line option (cifsroot=) and then call do_mount_root() with the appropriate mount options for cifs.ko. Signed-off-by: Paulo Alcantara (SUSE) <pc@cjr.nz> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-10-02Merge branch 'ionic-driver-updates'David S. Miller4-63/+119
Shannon Nelson says: ==================== ionic: driver updates These patches are a few updates to clean up some code issues and add an ethtool feature. v3: drop the Fixes tags as they really aren't fixing bugs simplify ionic_lif_quiesce() as no return is necessary v2: add cover letter edit a couple of patch descriptions for clarity and add Fixes: tags ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2019-10-02ionic: add lif_quiesce to wait for queue activity to stopShannon Nelson1-0/+16
Even though we've already turned off the queue activity with the ionic_qcq_disable(), we need to wait for any device queues that are processing packets to drain down before we try to flush our packets and tear down the queues. Signed-off-by: Shannon Nelson <snelson@pensando.io> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-10-02ionic: implement ethtool set-fecShannon Nelson1-27/+67
Wire up the --set-fec and --show-fec features in the ethtool callbacks and pull the related code out of set_link_ksettings. Signed-off-by: Shannon Nelson <snelson@pensando.io> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-10-02ionic: report users coalesce requestShannon Nelson3-18/+19
The user's request for an interrupt coalescing value gets translated into a hardware value to be used with the NIC, and was getting reported back based on the hw value, which, due to hw tic resolution, could be reported as a different number than what the user originally asked for. This code now tracks both the user request and what was put into the hardware so we can report back to the user what they requested. Signed-off-by: Shannon Nelson <snelson@pensando.io> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-10-02ionic: use wait_on_bit_lock() rather than open codeShannon Nelson3-13/+13
Replace the open-coded ionic_wait_for_bit() with the kernel's wait_on_bit_lock(). Signed-off-by: Shannon Nelson <snelson@pensando.io> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-10-02ionic: simplify returns in devlink infoShannon Nelson1-5/+4
There is no need for a goto in this bit of code. Signed-off-by: Shannon Nelson <snelson@pensando.io> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-10-02Merge branch 'per-netns-notifier'David S. Miller4-32/+165
Jiri Pirko says: ==================== net: introduce per-netns netdevice notifiers and use them in mlxsw Some drivers, like mlxsw, are not interested in notifications coming in for netdevices from other network namespaces. So introduce per-netns notifiers and allow to reduce overhead by listening only for notifications from the same netns. This is also a preparation for upcoming patchset "devlink: allow devlink instances to change network namespace". This resolves deadlock during reload mlxsw into initial netns made possible by 328fbe747ad4 ("net: Close race between {un, }register_netdevice_notifier() and setup_net()/cleanup_net()"). ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2019-10-02mlxsw: spectrum: Use per-netns netdevice notifier registrationJiri Pirko1-3/+6
The mlxsw_sp instance is not interested in events happening in other network namespaces. So use "_net" variants for netdevice notifier registration/unregistration and get only events which are happening in the net the instance is in. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-10-02net: introduce per-netns netdevice notifiersJiri Pirko3-0/+93
Often the code for example in drivers is interested in getting notifier call only from certain network namespace. In addition to the existing global netdevice notifier chain introduce per-netns chains and allow users to register to that. Eventually this would eliminate unnecessary overhead in case there are many netdevices in many network namespaces. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-10-02net: push loops and nb calls into helper functionsJiri Pirko3-29/+66
Push iterations over net namespaces and netdevices from register_netdevice_notifier() and unregister_netdevice_notifier() into helper functions. Along with that introduce continue_reverse macros to make the code a bit nicer allowing to get rid of "last" marks. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-10-01r8152: Use guard clause and fix comment typosPrashant Malani1-16/+16
Use a guard clause in tx_bottom() to reduce the indentation of the do-while loop. Also, fix a couple of spelling and grammatical mistakes in the r8152_csum_workaround() function comment. Change-Id: I460befde150ad92248fd85b0f189ec2df2ab8431 Signed-off-by: Prashant Malani <pmalani@chromium.org> Reviewed-by: Grant Grundler <grundler@chromium.org> Acked-by: Hayes Wang <hayeswang@realtek.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-10-01vsock/virtio: add support for MSG_PEEKMatias Ezequiel Vara Larsen1-3/+52
This patch adds support for MSG_PEEK. In such a case, packets are not removed from the rx_queue and credit updates are not sent. Signed-off-by: Matias Ezequiel Vara Larsen <matiasevara@gmail.com> Reviewed-by: Stefano Garzarella <sgarzare@redhat.com> Tested-by: Stefano Garzarella <sgarzare@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-10-01hso: fix NULL-deref on tty openJohan Hovold1-4/+8
Fix NULL-pointer dereference on tty open due to a failure to handle a missing interrupt-in endpoint when probing modem ports: BUG: kernel NULL pointer dereference, address: 0000000000000006 ... RIP: 0010:tiocmget_submit_urb+0x1c/0xe0 [hso] ... Call Trace: hso_start_serial_device+0xdc/0x140 [hso] hso_serial_open+0x118/0x1b0 [hso] tty_open+0xf1/0x490 Fixes: 542f54823614 ("tty: Modem functions for the HSO driver") Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-10-01dt-bindings: sh_eth convert bindings to json-schemaSimon Horman3-70/+115
Convert Renesas Electronics SH EtherMAC bindings documentation to json-schema. Also name bindings documentation file according to the compat string being documented. Signed-off-by: Simon Horman <horms+renesas@verge.net.au> Reviewed-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-10-01net: usb: ax88179_178a: allow optionally getting mac address from device treePeter Fink1-4/+27
Adopt and integrate the feature to pass the MAC address via device tree from asix_device.c (03fc5d4) also to other ax88179 based asix chips. E.g. the bootloader fills in local-mac-address and the driver will then pick up and use this MAC address. Signed-off-by: Peter Fink <pfink@christ-es.de> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-10-01ipv6: minor code reorg in inet6_fill_ifla6_attrs()Nicolas Dichtel1-4/+3
Just put related code together to ease code reading: the memcpy() is related to the nla_reserve(). Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-10-01Merge branch 'netdev-altnames'David S. Miller8-43/+348
Jiri Pirko says: ==================== net: introduce alternative names for network interfaces In the past, there was repeatedly discussed the IFNAMSIZ (16) limit for netdevice name length. Now when we have PF and VF representors with port names like "pfXvfY", it became quite common to hit this limit: 0123456789012345 enp131s0f1npf0vf6 enp131s0f1npf0vf22 Udev cannot rename these interfaces out-of-the-box and user needs to create custom rules to handle them. Also, udev has multiple schemes of netdev names. From udev code: * Type of names: * b<number> - BCMA bus core number * c<bus_id> - bus id of a grouped CCW or CCW device, * with all leading zeros stripped [s390] * o<index>[n<phys_port_name>|d<dev_port>] * - on-board device index number * s<slot>[f<function>][n<phys_port_name>|d<dev_port>] * - hotplug slot index number * x<MAC> - MAC address * [P<domain>]p<bus>s<slot>[f<function>][n<phys_port_name>|d<dev_port>] * - PCI geographical location * [P<domain>]p<bus>s<slot>[f<function>][u<port>][..][c<config>][i<interface>] * - USB port number chain * v<slot> - VIO slot number (IBM PowerVM) * a<vendor><model>i<instance> - Platform bus ACPI instance id * i<addr>n<phys_port_name> - Netdevsim bus address and port name One device can be often renamed by multiple patterns at the same time (e.g. pci address/mac). This patchset introduces alternative names for network interfaces. Main goal is to: 1) Overcome the IFNAMSIZ limitation (altname limitation is 128 bytes) 2) Allow to have multiple names at the same time (multiple udev patterns) 3) Allow to use alternative names as handle for commands The patchset introduces two new commands to add/delete list of properties. Currently only alternative names are implemented but the ifrastructure could be easily extended later on. This is very similar to the list of vlan and tunnels being added/deleted to/from bridge ports. See following examples. $ ip link 1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN mode DEFAULT group default qlen 1000 link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00 2: dummy0: <BROADCAST,NOARP> mtu 1500 qdisc noop state DOWN mode DEFAULT group default qlen 1000 link/ether ae:67:a9:67:46:86 brd ff:ff:ff:ff:ff:ff -> Add alternative names for dummy0: $ ip link prop add dummy0 altname someothername $ ip link prop add dummy0 altname someotherveryveryveryverylongname $ ip link 1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN mode DEFAULT group default qlen 1000 link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00 2: dummy0: <BROADCAST,NOARP> mtu 1500 qdisc noop state DOWN mode DEFAULT group default qlen 1000 link/ether ae:67:a9:67:46:86 brd ff:ff:ff:ff:ff:ff altname someothername altname someotherveryveryveryverylongname $ ip link show someotherveryveryveryverylongname 2: dummy0: <BROADCAST,NOARP> mtu 1500 qdisc noop state DOWN mode DEFAULT group default qlen 1000 link/ether ae:67:a9:67:46:86 brd ff:ff:ff:ff:ff:ff altname someothername altname someotherveryveryveryverylongname -> Add bridge brx, add it's alternative name and use alternative names to do enslavement. $ ip link add name brx type bridge $ ip link prop add brx altname mypersonalsuperspecialbridge $ ip link set someotherveryveryveryverylongname master mypersonalsuperspecialbridge $ ip link 1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN mode DEFAULT group default qlen 1000 link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00 2: dummy0: <BROADCAST,NOARP> mtu 1500 qdisc noop master brx state DOWN mode DEFAULT group default qlen 1000 link/ether ae:67:a9:67:46:86 brd ff:ff:ff:ff:ff:ff altname someothername altname someotherveryveryveryverylongname 3: brx: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN mode DEFAULT group default qlen 1000 link/ether ae:67:a9:67:46:86 brd ff:ff:ff:ff:ff:ff altname mypersonalsuperspecialbridge -> Add ipv4 address to the bridge using alternative name: $ ip addr add 192.168.0.1/24 dev mypersonalsuperspecialbridge $ ip addr show mypersonalsuperspecialbridge 3: brx: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN group default qlen 1000 link/ether ae:67:a9:67:46:86 brd ff:ff:ff:ff:ff:ff altname mypersonalsuperspecialbridge inet 192.168.0.1/24 scope global brx valid_lft forever preferred_lft forever -> Delete one of dummy0 alternative names: $ ip link prop del dummy0 altname someotherveryveryveryverylongname $ ip link 1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN mode DEFAULT group default qlen 1000 link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00 2: dummy0: <BROADCAST,NOARP> mtu 1500 qdisc noop master brx state DOWN mode DEFAULT group default qlen 1000 link/ether ae:67:a9:67:46:86 brd ff:ff:ff:ff:ff:ff altname someothername 3: brx: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN mode DEFAULT group default qlen 1000 link/ether ae:67:a9:67:46:86 brd ff:ff:ff:ff:ff:ff altname mypersonalsuperspecialbridge -> Add multiple alternative names at once $ ip link prop add dummy0 altname a altname b altname c altname d $ ip link 1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN mode DEFAULT group default qlen 1000 link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00 2: dummy0: <BROADCAST,NOARP> mtu 1500 qdisc noop master brx state DOWN mode DEFAULT group default qlen 1000 link/ether ae:67:a9:67:46:86 brd ff:ff:ff:ff:ff:ff altname someothername altname a altname b altname c altname d 3: brx: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN mode DEFAULT group default qlen 1000 link/ether ae:67:a9:67:46:86 brd ff:ff:ff:ff:ff:ff altname mypersonalsuperspecialbridge ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2019-10-01net: rtnetlink: add possibility to use alternative names as message handleJiri Pirko1-11/+18
Extend the basic rtnetlink commands to use alternative interface names as a handle instead of ifindex and ifname. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-10-01net: rtnetlink: introduce helper to get net_device instance by ifnameJiri Pirko1-20/+25
Introduce helper function rtnl_get_dev() that gets net_device structure instance pointer according to passed ifname or ifname attribute. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-10-01net: rtnetlink: unify the code in __rtnl_newlink get dev with the restJiri Pirko1-6/+4
__rtnl_newlink() code flow is a bit different around tb[IFLA_IFNAME] processing comparing to the other places. Change that to be unified with the rest. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-10-01net: rtnetlink: put alternative names to getlink messageJiri Pirko1-0/+53
Extend exiting getlink info message with list of properties. Now the only ones are alternative names. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-10-01net: rtnetlink: add linkprop commands to add and delete alternative ifnamesJiri Pirko7-2/+177
Add two commands to add and delete list of link properties. Implement the first property type along - alternative ifnames. Each net device can have multiple alternative names. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-10-01net: introduce name_node struct to be used in hashlistJiri Pirko2-20/+87
Introduce name_node structure to hold name of device and put it into hashlist instead of putting there struct net_device directly. Add a necessary infrastructure to manipulate the hashlist. This prepares the code to use the same hashlist for alternative names introduced later in this set. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-10-01net: procfs: use index hashlist instead of name hashlistJiri Pirko1-2/+2
Name hashlist is going to be used for more than just dev->name, so use rather index hashlist for iteration over net_device instances. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-10-01tcp: add ipv6_addr_v4mapped_loopback() helperEric Dumazet2-4/+7
tcp_twsk_unique() has a hard coded assumption about ipv4 loopback being 127/8 Lets instead use the standard ipv4_is_loopback() method, in a new ipv6_addr_v4mapped_loopback() helper. Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-10-01net: core: dev: replace state xoff flag comparison by netif_xmit_stopped methodJulio Faracco1-1/+1
Function netif_schedule_queue() has a hardcoded comparison between queue state and any xoff flag. This comparison does the same thing as method netif_xmit_stopped(). In terms of code clarity, it is better. See other methods like: generic_xdp_tx() and dev_direct_xmit(). Signed-off-by: Julio Faracco <jcfaracco@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-10-01r8152: Factor out OOB link list waitsPrashant Malani1-52/+21
The same for-loop check for the LINK_LIST_READY bit of an OOB_CTRL register is used in several places. Factor these out into a single function to reduce the lines of code. Change-Id: I20e8f327045a72acc0a83e2d145ae2993ab62915 Signed-off-by: Prashant Malani <pmalani@chromium.org> Reviewed-by: Grant Grundler <grundler@chromium.org> Acked-by: Hayes Wang <hayeswang@realtek.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-09-28Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netLinus Torvalds169-1307/+1225
Pull networking fixes from David Miller: 1) Sanity check URB networking device parameters to avoid divide by zero, from Oliver Neukum. 2) Disable global multicast filter in NCSI, otherwise LLDP and IPV6 don't work properly. Longer term this needs a better fix tho. From Vijay Khemka. 3) Small fixes to selftests (use ping when ping6 is not present, etc.) from David Ahern. 4) Bring back rt_uses_gateway member of struct rtable, it's semantics were not well understood and trying to remove it broke things. From David Ahern. 5) Move usbnet snaity checking, ignore endpoints with invalid wMaxPacketSize. From Bjørn Mork. 6) Missing Kconfig deps for sja1105 driver, from Mao Wenan. 7) Various small fixes to the mlx5 DR steering code, from Alaa Hleihel, Alex Vesker, and Yevgeny Kliteynik 8) Missing CAP_NET_RAW checks in various places, from Ori Nimron. 9) Fix crash when removing sch_cbs entry while offloading is enabled, from Vinicius Costa Gomes. 10) Signedness bug fixes, generally in looking at the result given by of_get_phy_mode() and friends. From Dan Crapenter. 11) Disable preemption around BPF_PROG_RUN() calls, from Eric Dumazet. 12) Don't create VRF ipv6 rules if ipv6 is disabled, from David Ahern. 13) Fix quantization code in tcp_bbr, from Kevin Yang. * git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (127 commits) net: tap: clean up an indentation issue nfp: abm: fix memory leak in nfp_abm_u32_knode_replace tcp: better handle TCP_USER_TIMEOUT in SYN_SENT state sk_buff: drop all skb extensions on free and skb scrubbing tcp_bbr: fix quantization code to not raise cwnd if not probing bandwidth mlxsw: spectrum_flower: Fail in case user specifies multiple mirror actions Documentation: Clarify trap's description mlxsw: spectrum: Clear VLAN filters during port initialization net: ena: clean up indentation issue NFC: st95hf: clean up indentation issue net: phy: micrel: add Asym Pause workaround for KSZ9021 net: socionext: ave: Avoid using netdev_err() before calling register_netdev() ptp: correctly disable flags on old ioctls lib: dimlib: fix help text typos net: dsa: microchip: Always set regmap stride to 1 nfp: flower: fix memory leak in nfp_flower_spawn_vnic_reprs nfp: flower: prevent memory leak in nfp_flower_spawn_phy_reprs net/sched: Set default of CONFIG_NET_TC_SKB_EXT to N vrf: Do not attempt to create IPv6 mcast rule if IPv6 is disabled net: sched: sch_sfb: don't call qdisc_put() while holding tree lock ...
2019-09-28Merge branch 'hugepage-fallbacks' (hugepatch patches from David Rientjes)Linus Torvalds6-42/+92
Merge hugepage allocation updates from David Rientjes: "We (mostly Linus, Andrea, and myself) have been discussing offlist how to implement a sane default allocation strategy for hugepages on NUMA platforms. With these reverts in place, the page allocator will happily allocate a remote hugepage immediately rather than try to make a local hugepage available. This incurs a substantial performance degradation when memory compaction would have otherwise made a local hugepage available. This series reverts those reverts and attempts to propose a more sane default allocation strategy specifically for hugepages. Andrea acknowledges this is likely to fix the swap storms that he originally reported that resulted in the patches that removed __GFP_THISNODE from hugepage allocations. The immediate goal is to return 5.3 to the behavior the kernel has implemented over the past several years so that remote hugepages are not immediately allocated when local hugepages could have been made available because the increased access latency is untenable. The next goal is to introduce a sane default allocation strategy for hugepages allocations in general regardless of the configuration of the system so that we prevent thrashing of local memory when compaction is unlikely to succeed and can prefer remote hugepages over remote native pages when the local node is low on memory." Note on timing: this reverts the hugepage VM behavior changes that got introduced fairly late in the 5.3 cycle, and that fixed a huge performance regression for certain loads that had been around since 4.18. Andrea had this note: "The regression of 4.18 was that it was taking hours to start a VM where 3.10 was only taking a few seconds, I reported all the details on lkml when it was finally tracked down in August 2018. https://lore.kernel.org/linux-mm/20180820032640.9896-2-aarcange@redhat.com/ __GFP_THISNODE in MADV_HUGEPAGE made the above enterprise vfio workload degrade like in the "current upstream" above. And it still would have been that bad as above until 5.3-rc5" where the bad behavior ends up happening as you fill up a local node, and without that change, you'd get into the nasty swap storm behavior due to compaction working overtime to make room for more memory on the nodes. As a result 5.3 got the two performance fix reverts in rc5. However, David Rientjes then noted that those performance fixes in turn regressed performance for other loads - although not quite to the same degree. He suggested reverting the reverts and instead replacing them with two small changes to how hugepage allocations are done (patch descriptions rephrased by me): - "avoid expensive reclaim when compaction may not succeed": just admit that the allocation failed when you're trying to allocate a huge-page and compaction wasn't successful. - "allow hugepage fallback to remote nodes when madvised": when that node-local huge-page allocation failed, retry without forcing the local node. but by then I judged it too late to replace the fixes for a 5.3 release. So 5.3 was released with behavior that harked back to the pre-4.18 logic. But now we're in the merge window for 5.4, and we can see if this alternate model fixes not just the horrendous swap storm behavior, but also restores the performance regression that the late reverts caused. Fingers crossed. * emailed patches from David Rientjes <rientjes@google.com>: mm, page_alloc: allow hugepage fallback to remote nodes when madvised mm, page_alloc: avoid expensive reclaim when compaction may not succeed Revert "Revert "Revert "mm, thp: consolidate THP gfp handling into alloc_hugepage_direct_gfpmask"" Revert "Revert "mm, thp: restore node-local hugepage allocations""
2019-09-28mm, page_alloc: allow hugepage fallback to remote nodes when madvisedDavid Rientjes1-0/+11
For systems configured to always try hard to allocate transparent hugepages (thp defrag setting of "always") or for memory that has been explicitly madvised to MADV_HUGEPAGE, it is often better to fallback to remote memory to allocate the hugepage if the local allocation fails first. The point is to allow the initial call to __alloc_pages_node() to attempt to defragment local memory to make a hugepage available, if possible, rather than immediately fallback to remote memory. Local hugepages will always have a better access latency than remote (huge)pages, so an attempt to make a hugepage available locally is always preferred. If memory compaction cannot be successful locally, however, it is likely better to fallback to remote memory. This could take on two forms: either allow immediate fallback to remote memory or do per-zone watermark checks. It would be possible to fallback only when per-zone watermarks fail for order-0 memory, since that would require local reclaim for all subsequent faults so remote huge allocation is likely better than thrashing the local zone for large workloads. In this case, it is assumed that because the system is configured to try hard to allocate hugepages or the vma is advised to explicitly want to try hard for hugepages that remote allocation is better when local allocation and memory compaction have both failed. Signed-off-by: David Rientjes <rientjes@google.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Michal Hocko <mhocko@suse.com> Cc: Mel Gorman <mgorman@suse.de> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Stefan Priebe - Profihost AG <s.priebe@profihost.ag> Cc: "Kirill A. Shutemov" <kirill@shutemov.name> Cc: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-09-28mm, page_alloc: avoid expensive reclaim when compaction may not succeedDavid Rientjes1-0/+22
Memory compaction has a couple significant drawbacks as the allocation order increases, specifically: - isolate_freepages() is responsible for finding free pages to use as migration targets and is implemented as a linear scan of memory starting at the end of a zone, - failing order-0 watermark checks in memory compaction does not account for how far below the watermarks the zone actually is: to enable migration, there must be *some* free memory available. Per the above, watermarks are not always suffficient if isolate_freepages() cannot find the free memory but it could require hundreds of MBs of reclaim to even reach this threshold (read: potentially very expensive reclaim with no indication compaction can be successful), and - if compaction at this order has failed recently so that it does not even run as a result of deferred compaction, looping through reclaim can often be pointless. For hugepage allocations, these are quite substantial drawbacks because these are very high order allocations (order-9 on x86) and falling back to doing reclaim can potentially be *very* expensive without any indication that compaction would even be successful. Reclaim itself is unlikely to free entire pageblocks and certainly no reliance should be put on it to do so in isolation (recall lumpy reclaim). This means we should avoid reclaim and simply fail hugepage allocation if compaction is deferred. It is also not helpful to thrash a zone by doing excessive reclaim if compaction may not be able to access that memory. If order-0 watermarks fail and the allocation order is sufficiently large, it is likely better to fail the allocation rather than thrashing the zone. Signed-off-by: David Rientjes <rientjes@google.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Michal Hocko <mhocko@suse.com> Cc: Mel Gorman <mgorman@suse.de> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Stefan Priebe - Profihost AG <s.priebe@profihost.ag> Cc: "Kirill A. Shutemov" <kirill@shutemov.name> Cc: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-09-28Revert "Revert "Revert "mm, thp: consolidate THP gfp handling into alloc_hugepage_direct_gfpmask""David Rientjes4-22/+51
This reverts commit 92717d429b38e4f9f934eed7e605cc42858f1839. Since commit a8282608c88e ("Revert "mm, thp: restore node-local hugepage allocations"") is reverted in this series, it is better to restore the previous 5.2 behavior between the thp allocation and the page allocator rather than to attempt any consolidation or cleanup for a policy that is now reverted. It's less risky during an rc cycle and subsequent patches in this series further modify the same policy that the pre-5.3 behavior implements. Consolidation and cleanup can be done subsequent to a sane default page allocation strategy, so this patch reverts a cleanup done on a strategy that is now reverted and thus is the least risky option. Signed-off-by: David Rientjes <rientjes@google.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Michal Hocko <mhocko@suse.com> Cc: Mel Gorman <mgorman@suse.de> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Stefan Priebe - Profihost AG <s.priebe@profihost.ag> Cc: "Kirill A. Shutemov" <kirill@shutemov.name> Cc: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-09-28Revert "Revert "mm, thp: restore node-local hugepage allocations""David Rientjes3-29/+17
This reverts commit a8282608c88e08b1782141026eab61204c1e533f. The commit references the original intended semantic for MADV_HUGEPAGE which has subsequently taken on three unique purposes: - enables or disables thp for a range of memory depending on the system's config (is thp "enabled" set to "always" or "madvise"), - determines the synchronous compaction behavior for thp allocations at fault (is thp "defrag" set to "always", "defer+madvise", or "madvise"), and - reverts a previous MADV_NOHUGEPAGE (there is no madvise mode to only clear previous hugepage advice). These are the three purposes that currently exist in 5.2 and over the past several years that userspace has been written around. Adding a NUMA locality preference adds a fourth dimension to an already conflated advice mode. Based on the semantic that MADV_HUGEPAGE has provided over the past several years, there exist workloads that use the tunable based on these principles: specifically that the allocation should attempt to defragment a local node before falling back. It is agreed that remote hugepages typically (but not always) have a better access latency than remote native pages, although on Naples this is at parity for intersocket. The revert commit that this patch reverts allows hugepage allocation to immediately allocate remotely when local memory is fragmented. This is contrary to the semantic of MADV_HUGEPAGE over the past several years: that is, memory compaction should be attempted locally before falling back. The performance degradation of remote hugepages over local hugepages on Rome, for example, is 53.5% increased access latency. For this reason, the goal is to revert back to the 5.2 and previous behavior that would attempt local defragmentation before falling back. With the patch that is reverted by this patch, we see performance degradations at the tail because the allocator happily allocates the remote hugepage rather than even attempting to make a local hugepage available. zone_reclaim_mode is not a solution to this problem since it does not only impact hugepage allocations but rather changes the memory allocation strategy for *all* page allocations. Signed-off-by: David Rientjes <rientjes@google.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Michal Hocko <mhocko@suse.com> Cc: Mel Gorman <mgorman@suse.de> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Stefan Priebe - Profihost AG <s.priebe@profihost.ag> Cc: "Kirill A. Shutemov" <kirill@shutemov.name> Cc: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-09-28Merge tag 'powerpc-5.4-2' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linuxLinus Torvalds28-93/+1476
Pull powerpc fixes from Michael Ellerman: "An assortment of fixes that were either missed by me, or didn't arrive quite in time for the first v5.4 pull. - Most notable is a fix for an issue with tlbie (broadcast TLB invalidation) on Power9, when using the Radix MMU. The tlbie can race with an mtpid (move to PID register, essentially MMU context switch) on another thread of the core, which can cause stores to continue to go to a page after it's unmapped. - A fix in our KVM code to add a missing barrier, the lack of which has been observed to cause missed IPIs and subsequently stuck CPUs in the host. - A change to the way we initialise PCR (Processor Compatibility Register) to make it forward compatible with future CPUs. - On some older PowerVM systems our H_BLOCK_REMOVE support could oops, fix it to detect such systems and fallback to the old invalidation method. - A fix for an oops seen on some machines when using KASAN on 32-bit. - A handful of other minor fixes, and two new selftests. Thanks to: Alistair Popple, Aneesh Kumar K.V, Christophe Leroy, Gustavo Romero, Joel Stanley, Jordan Niethe, Laurent Dufour, Michael Roth, Oliver O'Halloran" * tag 'powerpc-5.4-2' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: powerpc/eeh: Fix eeh eeh_debugfs_break_device() with SRIOV devices powerpc/nvdimm: use H_SCM_QUERY hcall on H_OVERLAP error powerpc/nvdimm: Use HCALL error as the return value selftests/powerpc: Add test case for tlbie vs mtpidr ordering issue powerpc/mm: Fixup tlbie vs mtpidr/mtlpidr ordering issue on POWER9 powerpc/book3s64/radix: Rename CPU_FTR_P9_TLBIE_BUG feature flag powerpc/book3s64/mm: Don't do tlbie fixup for some hardware revisions powerpc/pseries: Call H_BLOCK_REMOVE when supported powerpc/pseries: Read TLB Block Invalidate Characteristics KVM: PPC: Book3S HV: use smp_mb() when setting/clearing host_ipi flag powerpc/mm: Fix an Oops in kasan_mmu_init() powerpc/mm: Add a helper to select PAGE_KERNEL_RO or PAGE_READONLY powerpc/64s: Set reserved PCR bits powerpc: Fix definition of PCR bits to work with old binutils powerpc/book3s64/radix: Remove WARN_ON in destroy_context() powerpc/tm: Add tm-poison test
2019-09-28Merge branch 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds1-0/+1
Pull x86 fix from Ingo Molnar: "A kexec fix for the case when GCC_PLUGIN_STACKLEAK=y is enabled" * 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/purgatory: Disable the stackleak GCC plugin for the purgatory
2019-09-28Merge branch 'sched-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds17-250/+375
Pull scheduler fixes from Ingo Molnar: - Apply a number of membarrier related fixes and cleanups, which fixes a use-after-free race in the membarrier code - Introduce proper RCU protection for tasks on the runqueue - to get rid of the subtle task_rcu_dereference() interface that was easy to get wrong - Misc fixes, but also an EAS speedup * 'sched-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: sched/fair: Avoid redundant EAS calculation sched/core: Remove double update_max_interval() call on CPU startup sched/core: Fix preempt_schedule() interrupt return comment sched/fair: Fix -Wunused-but-set-variable warnings sched/core: Fix migration to invalid CPU in __set_cpus_allowed_ptr() sched/membarrier: Return -ENOMEM to userspace on memory allocation failure sched/membarrier: Skip IPIs when mm->mm_users == 1 selftests, sched/membarrier: Add multi-threaded test sched/membarrier: Fix p->mm->membarrier_state racy load sched/membarrier: Call sync_core only before usermode for same mm sched/membarrier: Remove redundant check sched/membarrier: Fix private expedited registration check tasks, sched/core: RCUify the assignment of rq->curr tasks, sched/core: With a grace period after finish_task_switch(), remove unnecessary code tasks, sched/core: Ensure tasks are available for a grace period after leaving the runqueue tasks: Add a count of task RCU users sched/core: Convert vcpu_is_preempted() from macro to an inline function sched/fair: Remove unused cfs_rq_clock_task() function
2019-09-28Merge branch 'next-lockdown' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-securityLinus Torvalds58-76/+861
Pull kernel lockdown mode from James Morris: "This is the latest iteration of the kernel lockdown patchset, from Matthew Garrett, David Howells and others. From the original description: This patchset introduces an optional kernel lockdown feature, intended to strengthen the boundary between UID 0 and the kernel. When enabled, various pieces of kernel functionality are restricted. Applications that rely on low-level access to either hardware or the kernel may cease working as a result - therefore this should not be enabled without appropriate evaluation beforehand. The majority of mainstream distributions have been carrying variants of this patchset for many years now, so there's value in providing a doesn't meet every distribution requirement, but gets us much closer to not requiring external patches. There are two major changes since this was last proposed for mainline: - Separating lockdown from EFI secure boot. Background discussion is covered here: https://lwn.net/Articles/751061/ - Implementation as an LSM, with a default stackable lockdown LSM module. This allows the lockdown feature to be policy-driven, rather than encoding an implicit policy within the mechanism. The new locked_down LSM hook is provided to allow LSMs to make a policy decision around whether kernel functionality that would allow tampering with or examining the runtime state of the kernel should be permitted. The included lockdown LSM provides an implementation with a simple policy intended for general purpose use. This policy provides a coarse level of granularity, controllable via the kernel command line: lockdown={integrity|confidentiality} Enable the kernel lockdown feature. If set to integrity, kernel features that allow userland to modify the running kernel are disabled. If set to confidentiality, kernel features that allow userland to extract confidential information from the kernel are also disabled. This may also be controlled via /sys/kernel/security/lockdown and overriden by kernel configuration. New or existing LSMs may implement finer-grained controls of the lockdown features. Refer to the lockdown_reason documentation in include/linux/security.h for details. The lockdown feature has had signficant design feedback and review across many subsystems. This code has been in linux-next for some weeks, with a few fixes applied along the way. Stephen Rothwell noted that commit 9d1f8be5cf42 ("bpf: Restrict bpf when kernel lockdown is in confidentiality mode") is missing a Signed-off-by from its author. Matthew responded that he is providing this under category (c) of the DCO" * 'next-lockdown' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security: (31 commits) kexec: Fix file verification on S390 security: constify some arrays in lockdown LSM lockdown: Print current->comm in restriction messages efi: Restrict efivar_ssdt_load when the kernel is locked down tracefs: Restrict tracefs when the kernel is locked down debugfs: Restrict debugfs when the kernel is locked down kexec: Allow kexec_file() with appropriate IMA policy when locked down lockdown: Lock down perf when in confidentiality mode bpf: Restrict bpf when kernel lockdown is in confidentiality mode lockdown: Lock down tracing and perf kprobes when in confidentiality mode lockdown: Lock down /proc/kcore x86/mmiotrace: Lock down the testmmiotrace module lockdown: Lock down module params that specify hardware parameters (eg. ioport) lockdown: Lock down TIOCSSERIAL lockdown: Prohibit PCMCIA CIS storage when the kernel is locked down acpi: Disable ACPI table override if the kernel is locked down acpi: Ignore acpi_rsdp kernel param when the kernel has been locked down ACPI: Limit access to custom_method when the kernel is locked down x86/msr: Restrict MSR access when the kernel is locked down x86: Lock down IO port access when the kernel is locked down ...
2019-09-27Merge branch 'next-integrity' of git://git.kernel.org/pub/scm/linux/kernel/git/zohar/linux-integrityLinus Torvalds32-203/+871
Pull integrity updates from Mimi Zohar: "The major feature in this time is IMA support for measuring and appraising appended file signatures. In addition are a couple of bug fixes and code cleanup to use struct_size(). In addition to the PE/COFF and IMA xattr signatures, the kexec kernel image may be signed with an appended signature, using the same scripts/sign-file tool that is used to sign kernel modules. Similarly, the initramfs may contain an appended signature. This contained a lot of refactoring of the existing appended signature verification code, so that IMA could retain the existing framework of calculating the file hash once, storing it in the IMA measurement list and extending the TPM, verifying the file's integrity based on a file hash or signature (eg. xattrs), and adding an audit record containing the file hash, all based on policy. (The IMA support for appended signatures patch set was posted and reviewed 11 times.) The support for appended signature paves the way for adding other signature verification methods, such as fs-verity, based on a single system-wide policy. The file hash used for verifying the signature and the signature, itself, can be included in the IMA measurement list" * 'next-integrity' of git://git.kernel.org/pub/scm/linux/kernel/git/zohar/linux-integrity: ima: ima_api: Use struct_size() in kzalloc() ima: use struct_size() in kzalloc() sefltest/ima: support appended signatures (modsig) ima: Fix use after free in ima_read_modsig() MODSIGN: make new include file self contained ima: fix freeing ongoing ahash_request ima: always return negative code for error ima: Store the measurement again when appraising a modsig ima: Define ima-modsig template ima: Collect modsig ima: Implement support for module-style appended signatures ima: Factor xattr_verify() out of ima_appraise_measurement() ima: Add modsig appraise_type option for module-style appended signatures integrity: Select CONFIG_KEYS instead of depending on it PKCS#7: Introduce pkcs7_get_digest() PKCS#7: Refactor verify_pkcs7_signature() MODSIGN: Export module signature definitions ima: initialize the "template" field with the default template
2019-09-27Merge tag 'nfsd-5.4' of git://linux-nfs.org/~bfields/linuxLinus Torvalds40-600/+2083
Pull nfsd updates from Bruce Fields: "Highlights: - Add a new knfsd file cache, so that we don't have to open and close on each (NFSv2/v3) READ or WRITE. This can speed up read and write in some cases. It also replaces our readahead cache. - Prevent silent data loss on write errors, by treating write errors like server reboots for the purposes of write caching, thus forcing clients to resend their writes. - Tweak the code that allocates sessions to be more forgiving, so that NFSv4.1 mounts are less likely to hang when a server already has a lot of clients. - Eliminate an arbitrary limit on NFSv4 ACL sizes; they should now be limited only by the backend filesystem and the maximum RPC size. - Allow the server to enforce use of the correct kerberos credentials when a client reclaims state after a reboot. And some miscellaneous smaller bugfixes and cleanup" * tag 'nfsd-5.4' of git://linux-nfs.org/~bfields/linux: (34 commits) sunrpc: clean up indentation issue nfsd: fix nfs read eof detection nfsd: Make nfsd_reset_boot_verifier_locked static nfsd: degraded slot-count more gracefully as allocation nears exhaustion. nfsd: handle drc over-allocation gracefully. nfsd: add support for upcall version 2 nfsd: add a "GetVersion" upcall for nfsdcld nfsd: Reset the boot verifier on all write I/O errors nfsd: Don't garbage collect files that might contain write errors nfsd: Support the server resetting the boot verifier nfsd: nfsd_file cache entries should be per net namespace nfsd: eliminate an unnecessary acl size limit Deprecate nfsd fault injection nfsd: remove duplicated include from filecache.c nfsd: Fix the documentation for svcxdr_tmpalloc() nfsd: Fix up some unused variable warnings nfsd: close cached files prior to a REMOVE or RENAME that would replace target nfsd: rip out the raparms cache nfsd: have nfsd_test_lock use the nfsd_file cache nfsd: hook up nfs4_preprocess_stateid_op to the nfsd_file cache ...
2019-09-27Merge tag 'virtio-fs-5.4' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/fuseLinus Torvalds11-1/+1329
Pull fuse virtio-fs support from Miklos Szeredi: "Virtio-fs allows exporting directory trees on the host and mounting them in guest(s). This isn't actually a new filesystem, but a glue layer between the fuse filesystem and a virtio based back-end. It's similar in functionality to the existing virtio-9p solution, but significantly faster in benchmarks and has better POSIX compliance. Further permformance improvements can be achieved by sharing the page cache between host and guest, allowing for faster I/O and reduced memory use. Kata Containers have been including the out-of-tree virtio-fs (with the shared page cache patches as well) since version 1.7 as an experimental feature. They have been active in development and plan to switch from virtio-9p to virtio-fs as their default solution. There has been interest from other sources as well. The userspace infrastructure is slated to be merged into qemu once the kernel part hits mainline. This was developed by Vivek Goyal, Dave Gilbert and Stefan Hajnoczi" * tag 'virtio-fs-5.4' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/fuse: virtio-fs: add virtiofs filesystem virtio-fs: add Documentation/filesystems/virtiofs.rst fuse: reserve values for mapping protocol
2019-09-27Merge tag '9p-for-5.4' of git://github.com/martinetd/linuxLinus Torvalds4-2/+8
Pull 9p updates from Dominique Martinet: "Some of the usual small fixes and cleanup. Small fixes all around: - avoid overlayfs copy-up for PRIVATE mmaps - KUMSAN uninitialized warning for transport error - one syzbot memory leak fix in 9p cache - internal API cleanup for v9fs_fill_super" * tag '9p-for-5.4' of git://github.com/martinetd/linux: 9p/vfs_super.c: Remove unused parameter data in v9fs_fill_super 9p/cache.c: Fix memory leak in v9fs_cache_session_get_cookie 9p: Transport error uninitialized 9p: avoid attaching writeback_fid on mmap with type PRIVATE
2019-09-27Merge tag 'riscv/for-v5.4-rc1-b' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linuxLinus Torvalds10-19/+74
Pull more RISC-V updates from Paul Walmsley: "Some additional RISC-V updates. This includes one significant fix: - Prevent interrupts from being unconditionally re-enabled during exception handling if they were disabled in the context in which the exception occurred Also a few other fixes: - Fix a build error when sparse memory support is manually enabled - Prevent CPUs beyond CONFIG_NR_CPUS from being enabled in early boot And a few minor improvements: - DT improvements: in the FU540 SoC DT files, improve U-Boot compatibility by adding an "ethernet0" alias, drop an unnecessary property from the DT files, and add support for the PWM device - KVM preparation: add a KVM-related macro for future RISC-V KVM support, and export some symbols required to build KVM support as modules - defconfig additions: build more drivers by default for QEMU configurations" * tag 'riscv/for-v5.4-rc1-b' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux: riscv: Avoid interrupts being erroneously enabled in handle_exception() riscv: dts: sifive: Drop "clock-frequency" property of cpu nodes riscv: dts: sifive: Add ethernet0 to the aliases node RISC-V: Export kernel symbols for kvm KVM: RISC-V: Add KVM_REG_RISCV for ONE_REG interface arch/riscv: disable excess harts before picking main boot hart RISC-V: Enable VIRTIO drivers in RV64 and RV32 defconfig RISC-V: Fix building error when CONFIG_SPARSEMEM_MANUAL=y riscv: dts: Add DT support for SiFive FU540 PWM driver
2019-09-27Merge tag 'nios2-v5.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/lftan/nios2Linus Torvalds1-3/+3
Pull nios2 fix from Ley Foon Tan: "Make sure the command line buffer is NUL-terminated" * tag 'nios2-v5.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/lftan/nios2: nios2: force the string buffer NULL-terminated
2019-09-27Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvmLinus Torvalds36-468/+906
Pull more KVM updates from Paolo Bonzini: "x86 KVM changes: - The usual accuracy improvements for nested virtualization - The usual round of code cleanups from Sean - Added back optimizations that were prematurely removed in 5.2 (the bare minimum needed to fix the regression was in 5.3-rc8, here comes the rest) - Support for UMWAIT/UMONITOR/TPAUSE - Direct L2->L0 TLB flushing when L0 is Hyper-V and L1 is KVM - Tell Windows guests if SMT is disabled on the host - More accurate detection of vmexit cost - Revert a pvqspinlock pessimization" * tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (56 commits) KVM: nVMX: cleanup and fix host 64-bit mode checks KVM: vmx: fix build warnings in hv_enable_direct_tlbflush() on i386 KVM: x86: Don't check kvm_rebooting in __kvm_handle_fault_on_reboot() KVM: x86: Drop ____kvm_handle_fault_on_reboot() KVM: VMX: Add error handling to VMREAD helper KVM: VMX: Optimize VMX instruction error and fault handling KVM: x86: Check kvm_rebooting in kvm_spurious_fault() KVM: selftests: fix ucall on x86 Revert "locking/pvqspinlock: Don't wait if vCPU is preempted" kvm: nvmx: limit atomic switch MSRs kvm: svm: Intercept RDPRU kvm: x86: Add "significant index" flag to a few CPUID leaves KVM: x86/mmu: Skip invalid pages during zapping iff root_count is zero KVM: x86/mmu: Explicitly track only a single invalid mmu generation KVM: x86/mmu: Revert "KVM: x86/mmu: Remove is_obsolete() call" KVM: x86/mmu: Revert "Revert "KVM: MMU: reclaim the zapped-obsolete page first"" KVM: x86/mmu: Revert "Revert "KVM: MMU: collapse TLB flushes when zap all pages"" KVM: x86/mmu: Revert "Revert "KVM: MMU: zap pages in batch"" KVM: x86/mmu: Revert "Revert "KVM: MMU: add tracepoint for kvm_mmu_invalidate_all_pages"" KVM: x86/mmu: Revert "Revert "KVM: MMU: show mmu_valid_gen in shadow page related tracepoints"" ...
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.