aboutsummaryrefslogtreecommitdiffstats
AgeCommit message (Collapse)AuthorFilesLines
2015-02-04vhost: switch vhost get_indirect() to iov_iter, kill memcpy_fromiovec()Al Viro3-28/+4
Cc: Michael S. Tsirkin <mst@redhat.com> Cc: kvm@vger.kernel.org Cc: virtualization@lists.linux-foundation.org Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2015-02-04net: switch sockets to ->read_iter/->write_iterAl Viro1-29/+27
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2015-02-04net/socket.c: fold do_sock_{read,write} into callersAl Viro1-35/+21
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2015-02-04crypto: switch af_alg_make_sg() to iov_iterAl Viro4-100/+62
With that, all ->sendmsg() instances are converted to iov_iter primitives and are agnostic wrt the kind of iov_iter they are working with. So's the last remaining ->recvmsg() instance that wasn't kind-agnostic yet. All ->sendmsg() and ->recvmsg() advance ->msg_iter by the amount actually copied and none of them modifies the underlying iovec, etc. Cc: linux-crypto@vger.kernel.org Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2015-02-04net: bury net/core/iovec.c - nothing in there is used anymoreAl Viro3-145/+1
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2015-02-04tipc: tipc ->sendmsg() conversionAl Viro2-7/+14
This one needs to copy the same data from user potentially more than once. Sadly, MTU changes can trigger that ;-/ Cc: Jon Maloy <jon.maloy@ericsson.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2015-02-04net: switch memcpy_fromiovec()/memcpy_fromiovecend() users to copy_from_iter()Al Viro7-18/+14
That takes care of the majority of ->sendmsg() instances - most of them via memcpy_to_msg() or assorted getfrag() callbacks. One place where we still keep memcpy_fromiovecend() is tipc - there we potentially read the same data over and over; separate patch, that... Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2015-02-04ip: convert tcp_sendmsg() to iov_iter primitivesAl Viro4-141/+123
patch is actually smaller than it seems to be - most of it is unindenting the inner loop body in tcp_sendmsg() itself... the bit in tcp_input.c is going to get reverted very soon - that's what memcpy_from_msg() will become, but not in this commit; let's keep it reasonably contained... There's one potentially subtle change here: in case of short copy from userland, mainline tcp_send_syn_data() discards the skb it has allocated and falls back to normal path, where we'll send as much as possible after rereading the same data again. This patch trims SYN+data skb instead - that way we don't need to copy from the same place twice. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2015-02-04ip: stash a pointer to msghdr in struct ping_fakehdrAl Viro3-7/+5
... instead of storing its ->mgs_iter.iov there Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2015-02-04rxrpc: make the users of rxrpc_kernel_send_data() set kvec-backed msg_iter properlyAl Viro2-10/+7
Use iov_iter_kvec() there, get rid of set_fs() games - now that rxrpc_send_data() uses iov_iter primitives, it'll handle ITER_KVEC just fine. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2015-02-04rxrpc: switch rxrpc_send_data() to iov_iter primitivesAl Viro2-39/+15
Convert skb_add_data() to iov_iter; allows to get rid of the explicit messing with iovec in its only caller - skb_add_data() will keep advancing ->msg_iter for us, so there's no need to similate that manually. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2015-02-04vmci: propagate msghdr all way down to __qp_memcpy_to_queue()Al Viro3-11/+10
Switch from passing msg->iov_iter.iov to passing msg itself Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2015-02-04ipv6: rawv6_send_hdrinc(): pass msghdrAl Viro1-4/+3
Switch from passing msg->iov_iter.iov to passing msg itself Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2015-02-04ipv4: raw_send_hdrinc(): pass msghdrAl Viro1-4/+3
Switch from passing msg->iov_iter.iov to passing msg itself Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2015-02-04netlink: make the check for "send from tx_ring" deterministicAl Viro1-0/+5
As it is, zero msg_iovlen means that the first iovec in the kernel array of iovecs is left uninitialized, so checking if its ->iov_base is NULL is random. Since the real users of that thing are doing sendto(fd, NULL, 0, ...), they are getting msg_iovlen = 1 and msg_iov[0] = {NULL, 0}, which is what this test is trying to catch. As suggested by davem, let's just check that msg_iovlen was 1 and msg_iov[0].iov_base was NULL - _that_ is well-defined and it catches what we want to catch. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2015-02-03Merge branch 'netlabel-next'David S. Miller2-28/+25
Markus Elfring says: ==================== netlabel: Deletion of a few unnecessary checks Further update suggestions were taken into account after patches were applied from static source code analysis. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2015-02-03netlabel: Less function calls in netlbl_mgmt_add_common() after error detectionMarkus Elfring1-25/+24
The functions "cipso_v4_doi_putdef" and "kfree" could be called in some cases by the netlbl_mgmt_add_common() function during error handling even if the passed variables contained still a null pointer. * This implementation detail could be improved by adjustments for jump labels. * Let us return immediately after the first failed function call according to the current Linux coding style convention. * Let us delete also an unnecessary check for the variable "entry" there. Signed-off-by: Markus Elfring <elfring@users.sourceforge.net> Acked-by: Paul Moore <paul@paul-moore.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-02-03netlabel: Deletion of an unnecessary check before the function call "cipso_v4_doi_free"Markus Elfring1-2/+1
The cipso_v4_doi_free() function tests whether its argument is NULL and then returns immediately. Thus the test around the call is not needed. This issue was detected by using the Coccinelle software. Signed-off-by: Markus Elfring <elfring@users.sourceforge.net> Acked-by: Paul Moore <paul@paul-moore.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-02-03netlabel: Deletion of an unnecessary check before the function call "cipso_v4_doi_putdef"Markus Elfring1-2/+1
The cipso_v4_doi_putdef() function tests whether its argument is NULL and then returns immediately. Thus the test around the call is not needed. This issue was detected by using the Coccinelle software. Signed-off-by: Markus Elfring <elfring@users.sourceforge.net> Acked-by: Paul Moore <paul@paul-moore.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-02-03net/fsl_pq_mdio: Document supported compatiblesShruti Kanetkar1-1/+10
The device tree binding(s) document has fallen out of sync with the driver code. Update the list of supported devices to reflect current driver capabilities Change-Id: I440d8de2ee2d9c3b7b23e69b3da851cab18a4c9a Signed-off-by: Shruti Kanetkar <Kanetkar.Shruti@gmail.com> Signed-off-by: Emil Medve <Emilian.Medve@Freescale.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-02-03net: rfkill: Add Broadcom BCM2E40 bluetooth ACPI IDMika Westerberg1-0/+1
This is yet another Broadcom bluetooth chip with ACPI ID BCM2E40. Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2015-02-03Bluetooth: Fix potential NULL dereferenceJohan Hedberg1-4/+3
The bnep_get_device function may be triggered by an ioctl just after a connection has gone down. In such a case the respective L2CAP chan->conn pointer will get set to NULL (by l2cap_chan_del). This patch adds a missing NULL check for this case in the bnep_get_device() function. Reported-by: Patrik Flykt <patrik.flykt@linux.intel.com> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2015-02-03Bluetooth: btusb: Add support for Lite-On (04ca) Broadcom based, BCM43142Matej Dubovy1-0/+4
Please add support for sub BT chip on the combo card Broadcom 43142A0 (in Lenovo E145), 04ca:2007 /sys/kernel/debug/usb/devices T: Bus=05 Lev=01 Prnt=01 Port=01 Cnt=02 Dev#= 3 Spd=12 MxCh= 0 D: Ver= 2.00 Cls=ff(vend.) Sub=01 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=04ca ProdID=2007 Rev= 1.12 S: Manufacturer=Broadcom Corp S: Product=BCM43142A0 S: SerialNumber=28E347EC73BD C:* #Ifs= 4 Cfg#= 1 Atr=e0 MxPwr= 0mA I:* If#= 0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=01 Prot=01 Driver=(none) E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=1ms E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms I:* If#= 1 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=01 Prot=01 Driver=(none) E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 0 Ivl=1ms I: If#= 1 Alt= 1 #EPs= 2 Cls=ff(vend.) Sub=01 Prot=01 Driver=(none) E: Ad=83(I) Atr=01(Isoc) MxPS= 9 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 9 Ivl=1ms I: If#= 1 Alt= 2 #EPs= 2 Cls=ff(vend.) Sub=01 Prot=01 Driver=(none) E: Ad=83(I) Atr=01(Isoc) MxPS= 17 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 17 Ivl=1ms I: If#= 1 Alt= 3 #EPs= 2 Cls=ff(vend.) Sub=01 Prot=01 Driver=(none) E: Ad=83(I) Atr=01(Isoc) MxPS= 25 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 25 Ivl=1ms I: If#= 1 Alt= 4 #EPs= 2 Cls=ff(vend.) Sub=01 Prot=01 Driver=(none) E: Ad=83(I) Atr=01(Isoc) MxPS= 33 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 33 Ivl=1ms I: If#= 1 Alt= 5 #EPs= 2 Cls=ff(vend.) Sub=01 Prot=01 Driver=(none) E: Ad=83(I) Atr=01(Isoc) MxPS= 49 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 49 Ivl=1ms I:* If#= 2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none) E: Ad=84(I) Atr=02(Bulk) MxPS= 32 Ivl=0ms E: Ad=04(O) Atr=02(Bulk) MxPS= 32 Ivl=0ms I:* If#= 3 Alt= 0 #EPs= 0 Cls=fe(app. ) Sub=01 Prot=01 Driver=(none) Firmware for 04ca:2007 can be extracted from the latest Lenovo E145 Bluetooth driver for Windows (driver is however described as BCM20702 but contains also firwmare for BCM43142). Search for BCM43142A0_001.001.011.0122.0153.hex within hex files, then it must be converted using hex2hcd utility. Rename file to BCM43142A0-04ca-2007.hcd, then move to /lib/firmware/brcm/. Signed-off-by: Matej Dubovy <matej.dubovy@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Cc: stable@vger.kernel.org
2015-02-02net: sctp: Deletion of an unnecessary check before the function call "kfree"Markus Elfring1-2/+1
The kfree() function tests whether its argument is NULL and then returns immediately. Thus the test around the call is not needed. This issue was detected by using the Coccinelle software. Signed-off-by: Markus Elfring <elfring@users.sourceforge.net> Acked-By: Neil Horman <nhorman@tuxdriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-02-02Merge branch 'udpv6_lockless_send'David S. Miller4-155/+327
Vladislav Yasevich says: ==================== ipv6: Add lockless UDP send path This series introduces a lockless UDPv6 send path similar to what Herbert Xu did for IPv4 a while ago. There are some difference from IPv4. IPv6 caching for flow label is a bit different, as well as it requires another cork cork structure that holds the IPv6 ancillary data. Please take a look. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2015-02-02ipv6: Allow for partial checksums on non-ufo packetsVlad Yasevich1-1/+10
Currntly, if we are not doing UFO on the packet, all UDP packets will start with CHECKSUM_NONE and thus perform full checksum computations in software even if device support IPv6 checksum offloading. Let's start start with CHECKSUM_PARTIAL if the device supports it and we are sending only a single packet at or below mtu size. Signed-off-by: Vladislav Yasevich <vyasevic@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-02-02udpv6: Add lockless sendmsg() supportVlad Yasevich1-4/+20
This commit adds the same functionaliy to IPv6 that commit 903ab86d195cca295379699299c5fc10beba31c7 Author: Herbert Xu <herbert@gondor.apana.org.au> Date: Tue Mar 1 02:36:48 2011 +0000 udp: Add lockless transmit path added to IPv4. UDP transmit path can now run without a socket lock, thus allowing multiple threads to send to a single socket more efficiently. This is only used when corking/MSG_MORE is not used. Signed-off-by: Vladislav Yasevich <vyasevic@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-02-02ipv6: Introduce udpv6_send_skb()Vlad Yasevich1-27/+40
Now that we can individually construct IPv6 skbs to send, add a udpv6_send_skb() function to populate the udp header and send the skb. This allows udp_v6_push_pending_frames() to re-use this function as well as enables us to add lockless sendmsg() support. Signed-off-by: Vladislav Yasevich <vyasevic@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-02-02ipv6: introduce ipv6_make_skbVlad Yasevich2-19/+103
This commit is very similar to commit 1c32c5ad6fac8cee1a77449f5abf211e911ff830 Author: Herbert Xu <herbert@gondor.apana.org.au> Date: Tue Mar 1 02:36:47 2011 +0000 inet: Add ip_make_skb and ip_finish_skb It adds IPv6 version of the helpers ip6_make_skb and ip6_finish_skb. The job of ip6_make_skb is to collect messages into an ipv6 packet and poplulate ipv6 eader. The job of ip6_finish_skb is to transmit the generated skb. Together they replicated the job of ip6_push_pending_frames() while also provide the capability to be called independently. This will be needed to add lockless UDP sendmsg support. Signed-off-by: Vladislav Yasevich <vyasevic@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-02-02ipv6: Append sending data to arbitrary queueVlad Yasevich1-39/+67
Add the ability to append data to arbitrary queue. This will be needed later to implement lockless UDP sends. Signed-off-by: Vladislav Yasevich <vyasevic@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-02-02ipv6: pull cork initialization into its own function.Vlad Yasevich2-74/+96
Pull IPv6 cork initialization into its own function that can be re-used. IPv6 specific cork data did not have an explicit data structure. This patch creats eone so that just ipv6 cork data can be as arguemts. Also, since IPv6 tries to save the flow label into inet_cork_full tructure, pass the full cork. Adjust ip6_cork_release() to take cork data structures. Signed-off-by: Vladislav Yasevich <vyasevic@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-02-02cxgb4 : Improve IEEE DCBx support, other minor open-lldp fixesAnish Bhatt2-2/+107
* Add support for IEEE ets & pfc api. * Fix bug that resulted in incorrect bandwidth percentage being returned for CEE peers * Convert pfc enabled info from firmware format to what dcbnl expects before returning Signed-off-by: Anish Bhatt <anish@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-02-02net/tulip: don't warn about unknown ARM architectureArnd Bergmann1-1/+1
ARM has 32-byte cache lines, which according to the comment in the init registers function seems to work best with the default value of 0x4800 that is also used on sparc and parisc. This adds ARM to the same list, to use that default but no longer warn about it. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Grant Grundler <grundler@parisc-linux.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-02-02net: hip04: add missing MODULE_LICENSEArnd Bergmann1-0/+1
The hip04 ethernet driver causes a new compile-time warning when built as a loadable module: WARNING: modpost: missing MODULE_LICENSE() in drivers/net/ethernet/hisilicon/hip04_eth.o see include/linux/module.h for more information This adds the license as "GPL", which matches the header of the file. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Ding Tianhong <dingtianhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-02-02net: dctcp: loosen requirement to assert ECT(0) during 3WHSFlorian Westphal1-9/+5
One deployment requirement of DCTCP is to be able to run in a DC setting along with TCP traffic. As Glenn Judd's NSDI'15 paper "Attaining the Promise and Avoiding the Pitfalls of TCP in the Datacenter" [1] (tba) explains, one way to solve this on switch side is to split DCTCP and TCP traffic in two queues per switch port based on the DSCP: one queue soley intended for DCTCP traffic and one for non-DCTCP traffic. For the DCTCP queue, there's the marking threshold K as explained in commit e3118e8359bb ("net: tcp: add DCTCP congestion control algorithm") for RED marking ECT(0) packets with CE. For the non-DCTCP queue, there's f.e. a classic tail drop queue. As already explained in e3118e8359bb, running DCTCP at scale when not marking SYN/SYN-ACK packets with ECT(0) has severe consequences as for non-ECT(0) packets, traversing the RED marking DCTCP queue will result in a severe reduction of connection probability. This is due to the DCTCP queue being dominated by ECT(0) traffic and switches handle non-ECT traffic in the RED marking queue after passing K as drops, where K is usually a low watermark in order to leave enough tailroom for bursts. Splitting DCTCP traffic among several queues (ECN and non-ECN queue) is being considered a terrible idea in the network community as it splits single flows across multiple network paths. Therefore, commit e3118e8359bb implements this on Linux as ECT(0) marked traffic, as we argue that marking all packets of a DCTCP flow is the only viable solution and also doesn't speak against the draft. However, recently, a DCTCP implementation for FreeBSD hit also their mainline kernel [2]. In order to let them play well together with Linux' DCTCP, we would need to loosen the requirement that ECT(0) has to be asserted during the 3WHS as not implemented in FreeBSD. This simplifies the ECN test and lets DCTCP work together with FreeBSD. Joint work with Daniel Borkmann. [1] https://www.usenix.org/conference/nsdi15/technical-sessions/presentation/judd [2] https://github.com/freebsd/freebsd/commit/8ad879445281027858a7fa706d13e458095b595f Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Cc: Glenn Judd <glenn.judd@morganstanley.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-02-02Merge branch 'net-timestamp'David S. Miller11-17/+113
Willem de Bruijn says: ==================== net-timestamp: blinding Changes (v2 -> v3) - rebase only: v2 did not make it to patchwork / netdev (v1 -> v2) - fix capability check in patch 2 this could be moved into net/core/sock.c as sk_capable_nouser() (rfc -> v1) - dropped patch 4: timestamp batching due to complexity, as discussed - dropped patch 5: default mode because it does not really cover all use cases, as discussed - added documentation - minor fix, see patch 2 Two issues were raised during recent timestamping discussions: 1. looping full packets on the error queue exposes packet headers 2. TCP timestamping with retransmissions generates many timestamps This RFC patchset is an attempt at addressing both without breaking legacy behavior. Patch 1 reintroduces the "no payload" timestamp option, which loops timestamps onto an empty skb. This reduces the pressure on SO_RCVBUF from looping many timestamps. It does not reduce the number of recv() calls needed to process them. The timestamp cookie mechanism developed in http://patchwork.ozlabs.org/patch/427213/ did, but this is considerably simpler. Patch 2 then gives administrators the power to block all timestamp requests that contain data by unprivileged users. I proposed this earlier as a backward compatible workaround in the discussion of net-timestamp: pull headers for SOCK_STREAM http://patchwork.ozlabs.org/patch/414810/ Patch 3 only updates the txtimestamp example to test this option. Verified that with option '-n', length is zero in all cases and option '-I' (PKTINFO) stops working. ==================== Acked-by: Richard Cochran <richardcochran@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-02-02net-timestamp: no-payload option in txtimestamp testWillem de Bruijn1-4/+24
Demonstrate how SOF_TIMESTAMPING_OPT_TSONLY can be used and test the implementation. Signed-off-by: Willem de Bruijn <willemb@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-02-02net-timestamp: no-payload only sysctlWillem de Bruijn5-1/+41
Tx timestamps are looped onto the error queue on top of an skb. This mechanism leaks packet headers to processes unless the no-payload options SOF_TIMESTAMPING_OPT_TSONLY is set. Add a sysctl that optionally drops looped timestamp with data. This only affects processes without CAP_NET_RAW. The policy is checked when timestamps are generated in the stack. It is possible for timestamps with data to be reported after the sysctl is set, if these were queued internally earlier. No vulnerability is immediately known that exploits knowledge gleaned from packet headers, but it may still be preferable to allow administrators to lock down this path at the cost of possible breakage of legacy applications. Signed-off-by: Willem de Bruijn <willemb@google.com> ---- Changes (v1 -> v2) - test socket CAP_NET_RAW instead of capable(CAP_NET_RAW) (rfc -> v1) - document the sysctl in Documentation/sysctl/net.txt - fix access control race: read .._OPT_TSONLY only once, use same value for permission check and skb generation. Signed-off-by: David S. Miller <davem@davemloft.net>
2015-02-02net-timestamp: no-payload optionWillem de Bruijn6-12/+48
Add timestamping option SOF_TIMESTAMPING_OPT_TSONLY. For transmit timestamps, this loops timestamps on top of empty packets. Doing so reduces the pressure on SO_RCVBUF. Payload inspection and cmsg reception (aside from timestamps) are no longer possible. This works together with a follow on patch that allows administrators to only allow tx timestamping if it does not loop payload or metadata. Signed-off-by: Willem de Bruijn <willemb@google.com> ---- Changes (rfc -> v1) - add documentation - remove unnecessary skb->len test (thanks to Richard Cochran) Signed-off-by: David S. Miller <davem@davemloft.net>
2015-02-02Bluetooth: Remove mgmt_rp_read_local_oob_ext_data structJohan Hedberg2-20/+9
This extended return parameters struct conflicts with the new Read Local OOB Extended Data command definition. To avoid the conflict simply rename the old "extended" version to the normal one and update the code appropriately to take into account the two possible response PDU sizes. Signed-off-by: Johan Hedberg <johan.hedberg@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2015-02-02Bluetooth: Set HCI_QUIRK_STRICT_DUPLICATE_FILTER for BTUSB_INTEL_NEWMarcel Holtmann1-0/+1
The Intel Snowfield Peak Bluetooth controllers use a strict scanning filter policy that filters based on Bluetooth device addresses and not on RSSI. Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2015-02-02Bluetooth: Add restarting to service discoveryJakub Pawlowski2-5/+49
When using LE_SCAN_FILTER_DUP_ENABLE, some controllers would send advertising report from each LE device only once. That means that we don't get any updates on RSSI value, and makes Service Discovery very slow. This patch adds restarting scan when in Service Discovery, and device with filtered uuid is found, but it's not in RSSI range to send event yet. This way if device moves into range, we will quickly get RSSI update. Signed-off-by: Jakub Pawlowski <jpawlowski@google.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2015-02-02Bluetooth: Add le_scan_restart work for LE scan restartingJakub Pawlowski3-1/+97
Currently there is no way to restart le scan, and it's needed in service scan method. The way it work: it disable, and then enable le scan on controller. During the restart, we must remember when the scan was started, and it's duration, to later re-schedule the le_scan_disable work, that was stopped during the stop scan phase. Signed-off-by: Jakub Pawlowski <jpawlowski@google.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2015-02-01net: rocker: Add support for retrieving port level statisticsDavid Ahern2-0/+155
Add support for retrieving port level statistics from device. Hook is added for ethtool's stats functionality. For example, $ ethtool -S eth3 NIC statistics: rx_packets: 12 rx_bytes: 2790 rx_dropped: 0 rx_errors: 0 tx_packets: 8 tx_bytes: 728 tx_dropped: 0 tx_errors: 0 Signed-off-by: David Ahern <dsahern@gmail.com> Acked-by: Scott Feldman <sfeldma@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-02-01Merge branch 'switchdev_offload_flags'David S. Miller12-21/+206
Roopa Prabhu says: ==================== switchdev offload flags This patch series introduces new offload flags for switchdev. Kernel network subsystems can use this flag to accelerate network functions by offloading to hw. I expect that there will be need for subsystem specific feature flag in the future. This patch series currently only addresses bridge driver link attribute offloads to hardware. Looking at the current state of bridge l2 offload in the kernel, - flag 'self' is the way to directly manage the bridge device in hw via the ndo_bridge_setlink/ndo_bridge_getlink calls - flag 'master' is always used to manage the in kernel bridge devices via the same ndo_bridge_setlink/ndo_bridge_getlink calls Today these are used separately. The nic offloads use hwmode "vepa/veb" to go directly to hw with the "self" flag. At this point i am trying not to introduce any new user facing flags/attributes. In the model where we want the kernel bridging to be accelerated with hardware, we very much want the bridge driver to be involved. In this proposal, - The offload flag/bit helps switch asic drivers to indicate that they accelerate the kernel networking objects/functions - The user does not have to specify a new flag to do so. A bridge created with switch asic ports will be accelerated if the switch driver supports it. - The user can continue to directly manage l2 in nics (ixgbe) using the existing hwmode/self flags - It also does not stop users from using the 'self' flag to talk to the switch asic driver directly - Involving the bridge driver makes sure the add/del notifications to user space go out after both kernel and hardware are programmed (To selectively offload bridge port attributes, example learning in hw only etc, we can introduce offload bits for per bridge port flag attribute as in my previous patch https://patchwork.ozlabs.org/patch/413211/. I have not included that in this series) v2 - try a different name for the offload flag/bit - tries to solve the stacked netdev case by traversing the lowerdev list to reach the switch port v3 - - Tested with bond as bridge port for the stacked device case. Includes a bond_fix_features change to not ignore the NETIF_F_HW_NETFUNC_OFFLOAD flag - Some checkpatch fixes v4 - - rename flag to NETIF_F_HW_SWITCH_OFFLOAD - add ndo_bridge_setlink/dellink handlers in bond and team drivers as suggested by jiri. - introduce default ndo_dflt_netdev_switch_port_bridge_setlink/dellink handlers that masters can use to call offload api on lowerdevs. ==================== Signed-off-by: Roopa Prabhu <roopa@cumulusnetworks.com>
2015-02-01team: handle NETIF_F_HW_SWITCH_OFFLOAD flag and add ndo_bridge_setlink/dellink handlersRoopa Prabhu1-1/+4
Currently ndo_bridge_setlink and ndo_bridge_dellink handlers point to the default switchdev handlers This follows my bonding driver changes. I have only compile tested this patch. However similar bonding code has been tested. Signed-off-by: Roopa Prabhu <roopa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-02-01bonding: handle NETIF_F_HW_SWITCH_OFFLOAD flag and add ndo_bridge_setlink/dellink handlersRoopa Prabhu1-1/+8
We want bond to pick up the offload flag if any of its slaves have it. NETIF_F_HW_SWITCH_OFFLOAD flag is added to the mask, so that netdev_increment_features does not ignore it. This also adds ndo_bridge_setlink and ndo_bridge_dellink handlers. These currently point to the default handlers provided by the switchdev api. Signed-off-by: Roopa Prabhu <roopa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-02-01rocker: set feature NETIF_F_HW_SWITCH_OFFLOADRoopa Prabhu1-1/+2
This patch sets the NETIF_F_HW_SWITCH_OFFLOAD feature flag on rocker ports Signed-off-by: Roopa Prabhu <roopa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-02-01bridge: offload bridge port attributes to switch asic if feature flag setRoopa Prabhu1-3/+23
This patch adds support to set/del bridge port attributes in hardware from the bridge driver. With this, when the user sends a bridge setlink message with no flags or master flags set, - the bridge driver ndo_bridge_setlink handler sets settings in the kernel - calls the swicthdev api to propagate the attrs to the switchdev hardware You can still use the self flag to go to the switch hw or switch port driver directly. With this, it also makes sure a notification goes out only after the attributes are set both in the kernel and hw. The patch calls switchdev api only if BRIDGE_FLAGS_SELF is not set. This is because the offload cases with BRIDGE_FLAGS_SELF are handled in the caller (in rtnetlink.c). Signed-off-by: Roopa Prabhu <roopa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-02-01swdevice: add new apis to set and del bridge port attributesRoopa Prabhu2-1/+146
This patch adds two new api's netdev_switch_port_bridge_setlink and netdev_switch_port_bridge_dellink to offload bridge port attributes to switch port (The names of the apis look odd with 'switch_port_bridge', but am more inclined to change the prefix of the api to something else. Will take any suggestions). The api's look at the NETIF_F_HW_SWITCH_OFFLOAD feature flag to pass bridge port attributes to the port device. Signed-off-by: Roopa Prabhu <roopa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.