aboutsummaryrefslogtreecommitdiffstats
AgeCommit message (Collapse)AuthorFilesLines
2017-08-18nfp: split software and hardware vNIC statisticsJakub Kicinski1-71/+119
In preparation for reporting vNIC HW stats on representors split handling of the SW and HW stats in ethtool -S. Representors don't have SW stats (since vNIC is assigned to the VM). Remove the questionable defines which assume nn variable exists in the scope. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: Simon Horman <simon.horman@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-18nfp: add helper for printing ethtool stringsJakub Kicinski1-33/+32
Add a helper for printing ethtool strings and advancing the pointer correctly. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: Simon Horman <simon.horman@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-18nfp: don't report standard netdev statistics in ethtoolJakub Kicinski1-75/+30
We have been recently called out as a bad example for reporting standard netdev statistics as part of ethtool. Fix that :) Removing standard statistics allows us to simplify the structure holding definitions since we no longer have to mux different types of statistics. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: Simon Horman <simon.horman@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-18nfp: allow retreiving management FW logs on representorsJakub Kicinski2-18/+17
Users should be able to dump the management FW logs on any of the driver's netdevs. Make the code only depend on the nfp_app and share it between vNICs and representors. Storing the dump flag is simply dropped for now, since we only support the argument being set to 0. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: Simon Horman <simon.horman@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-18nfp: provide ethtool_drvinfo on representorsJakub Kicinski3-12/+54
Extend representors' ethtool ops to show basic info like firmware version, driver version, and driver name. While at it don't set drvinfo.n_stats and drvinfo.regdump_len, core will invoke appropriate handlers to get those. A helper is added to turn a netdev into nfp_app for convenience. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: Simon Horman <simon.horman@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-18nfp: link basic ethtool ops to representorsJakub Kicinski3-0/+7
Start linking ethtool ops to representors. Begin by adding a separate ops structure and providing link state. Next patches will convert appropriate functions to only use nfp_port, which will make them reusable on representors. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: Simon Horman <simon.horman@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-18Merge branch 'net-sysfs-related-cleanups'David S. Miller3-127/+112
Stephen Hemminger says: ==================== net: sysfs related cleanups Network sysfs infrastructure changes. Mostly related to using ro_after_init to make function tables immutable. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-18net: style cleanupsstephen hemminger1-32/+36
Make code closer to current style. Mostly whitespace changes. Signed-off-by: Stephen Hemminger <sthemmin@microsoft.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-18net: mark receive queue attributes ro_after_initstephen hemminger1-12/+13
Signed-off-by: Stephen Hemminger <sthemmin@microsoft.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-18net: make queue attributes ro_after_initstephen hemminger1-21/+19
The XPS queue attributes can be ro_after_init. Also use __ATTR_RX macros to simplify initialization. Signed-off-by: Stephen Hemminger <sthemmin@microsoft.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-18net: make BQL sysfs attributes ro_after_initstephen hemminger1-11/+11
Also fix macro to not have ; at end. Signed-off-by: Stephen Hemminger <sthemmin@microsoft.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-18net: drop unused attribute argument from sysfs queue funcsstephen hemminger3-30/+14
The show and store functions don't need/use the attribute. Signed-off-by: Stephen Hemminger <sthemmin@microsoft.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-18net: make net sysfs attributes ro_after_initstephen hemminger1-2/+2
The attributes of net devices are immutable. Ideally, attribute groups would contain const attributes but there are too many places that do modifications of list during startup (in other code) to allow that. Signed-off-by: Stephen Hemminger <sthemmin@microsoft.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-18net: constify net_ns_type_operationsstephen hemminger2-2/+2
This can be const. Signed-off-by: Stephen Hemminger <sthemmin@microsoft.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-18net: make net_class ro_after_initstephen hemminger1-1/+1
The net_class in sysfs is only modified on init. Signed-off-by: Stephen Hemminger <sthemmin@microsoft.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-18net: constify netdev_class_filestephen hemminger2-6/+6
These functions are wrapper arount class_create_file which can take a const attribute. Signed-off-by: Stephen Hemminger <sthemmin@microsoft.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-18net: don't decrement kobj reference count on init failurestephen hemminger1-12/+10
If kobject_init_and_add failed, then the failure path would decrement the reference count of the queue kobject whose reference count was already zero. Fixes: 114cf5802165 ("bql: Byte queue limits") Signed-off-by: Stephen Hemminger <sthemmin@microsoft.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-18Merge branch 'amd-xgbe-next'David S. Miller12-353/+1158
Tom Lendacky says: ==================== amd-xgbe: AMD XGBE driver updates 2017-08-17 The following updates are included in this driver update series: - Set the MDIO mode to clause 45 for the 10GBase-T configuration - Set the MII control width to 8-bits for speeds less than 1Gbps - Fix an issue to related to module removal when the devices are up - Fix ethtool statistics related to packet counting of TSO packets - Add support for device renaming - Add additional dynamic debug output for the PCS window calculation - Optimize reading of DMA channel interrupt enablement register - Add additional dynamic debug output about the hardware features - Add per queue Tx and Rx ethtool statistics - Add a macro to clear ethtool_link_ksettings modes - Convert the driver to use the ethtool_link_ksettings - Add support for VXLAN offload capabilities - Add additional ethtool statistics related to VXLAN This patch series is based on net-next. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-18amd-xgbe: Add additional ethtool statisticsLendacky, Thomas3-1/+16
Add some additional statistics for tracking VXLAN packets and checksum errors. Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-18amd-xgbe: Add support for VXLAN offload capabilitiesLendacky, Thomas5-6/+520
The hardware has the capability to perform checksum offload support (both Tx and Rx) and TSO support for VXLAN packets. Add the support required to enable this. The hardware can only support a single VXLAN port for offload. If more than one VXLAN port is added then the offload capabilities have to be disabled and can no longer be advertised. Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-18amd-xgbe: Convert to using the new link mode settingsLendacky, Thomas5-242/+345
Convert from using the old u32 supported, advertising, etc. link settings to the new link mode settings that support bit positions / settings greater than 32 bits. Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-18net: ethtool: Add macro to clear a link mode settingLendacky, Thomas1-0/+11
There are currently macros to set and test an ETHTOOL_LINK_MODE_ setting, but not to clear one. Add a macro to clear an ETHTOOL_LINK_MODE_ setting. Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-18amd-xgbe: Add per queue Tx and Rx statisticsLendacky, Thomas3-8/+46
Add per queue Tx and Rx packet and byte counts. Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-18amd-xgbe: Add hardware features debug outputLendacky, Thomas1-3/+75
Use the dynamic debug support to output information about the hardware features reported by the device. Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-18amd-xgbe: Optimize DMA channel interrupt enablementLendacky, Thomas2-44/+37
Currently whenever the driver needs to enable or disable interrupts for a DMA channel it reads the interrupt enable register (IER), updates the value and then writes the new value back to the IER. Since the hardware does not change the IER, software can track this value and elimiate the need to read it each time. Add the IER value to the channel related data structure and use that as the base for enabling and disabling interrupts, thus removing the need for the MMIO read. Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-18amd-xgbe: Add additional dynamic debug messagesLendacky, Thomas1-0/+4
Add some additional dynamic debug message to the driver. The new messages will provide additional information about the PCS window calculation. Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-18amd-xgbe: Add support to handle device renamingLendacky, Thomas4-46/+100
Many of the names used by the driver are based upon the name of the device found during device probe. Move the formatting of the names into the device open function so that any renaming that occurs before the device is brought up will be accounted for. This also means moving the creation of some named workqueues into the device open path. Add support to register for net events so that if a device is renamed the corresponding debugfs directory can be renamed. Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-18amd-xgbe: Update TSO packet statistics accuracyLendacky, Thomas1-1/+1
When transmitting a TSO packet, the driver only increments the TSO packet statistic by one rather than the number of total packets that were sent. Update the driver to record the total number of packets that resulted from TSO transmit. Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-18amd-xgbe: Be sure driver shuts down cleanly on module removalLendacky, Thomas2-4/+2
Sometimes when the driver is being unloaded while the devices are still up the driver can issue errors. This is based on timing and the double invocation of some routines. The phy_exit() call needs to be run after the network device has been closed and unregistered from the system. Also, the phy_exit() does not need to invoke phy_stop() since that will be called as part of the device closing, so remove that call. Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-18amd-xgbe: Set the MII control width for the MAC interfaceLendacky, Thomas2-0/+3
When running in SGMII mode at speeds below 1000Mbps, the auto-negotition control register must set the MII control width for the MAC interface to be 8-bits wide. By default the width is 4-bits. Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-18amd-xgbe: Set the MDIO mode for 10000Base-T configurationLendacky, Thomas1-1/+1
Currently the MDIO mode is set to none for the 10000Base-T, which is incorrect. The MDIO mode should for this configuration should be clause 45. Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-18mlx5: ensure 0 is returned when vport is zeroColin Ian King1-1/+1
Currently, if vport is zero then then an uninialized return status in err is returned. Since the only return status at the end of the function esw_add_uc_addr is zero for the current set of return paths we may as well just return 0 rather than err to fix this issue. Detected by CoverityScan, CID#1452698 ("Uninitialized scalar variable") Fixes: eeb66cdb6826 ("net/mlx5: Separate between E-Switch and MPFS") Signed-off-by: Colin Ian King <colin.king@canonical.com> Reviewed-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-18bpf: Fix map-in-map checking in the verifierMartin KaFai Lau1-0/+1
In check_map_func_compatibility(), a 'break' has been accidentally removed for the BPF_MAP_TYPE_ARRAY_OF_MAPS and BPF_MAP_TYPE_HASH_OF_MAPS cases. This patch adds it back. Fixes: 174a79ff9515 ("bpf: sockmap with sk redirect support") Cc: John Fastabend <john.fastabend@gmail.com> Signed-off-by: Martin KaFai Lau <kafai@fb.com> Acked-by: Alexei Starovoitov <ast@kernel.org> Acked-by: John Fastabend <john.fastabend@gmail.com> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-18Merge branch 'xdp-adjust-xdp-redirect-tracepoint'David S. Miller3-12/+20
Jesper Dangaard Brouer says: ==================== xdp: adjust xdp redirect tracepoint Working on streamlining the tracepoints for XDP. The eBPF programs and XDP have no flow-control or queueing. Investigating using tracepoint to provide a feedback on XDP_REDIRECT xmit overflow events. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-18xdp: adjust xdp redirect tracepoint to include return error codeJesper Dangaard Brouer2-11/+19
The return error code need to be included in the tracepoint xdp:xdp_redirect, else its not possible to distinguish successful or failed XDP_REDIRECT transmits. XDP have no queuing mechanism. Thus, it is fairly easily to overrun a NIC transmit queue. The eBPF program invoking helpers (bpf_redirect or bpf_redirect_map) to redirect a packet doesn't get any feedback whether the packet was actually transmitted. Info on failed transmits in the tracepoint xdp:xdp_redirect, is interesting as this opens for providing a feedback-loop to the receiving XDP program. Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-18ixgbe: change ndo_xdp_xmit return code on xmit errorsJesper Dangaard Brouer1-1/+1
Use errno -ENOSPC ("No space left on device") when the XDP xmit have no space left on the TX ring buffer, instead of -ENOMEM. Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com> Acked-by: John Fastabend <john.fastabend@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-18liquidio: remove support for deprecated f/w cmd OCTNET_CMD_RESET_PFRick Farrington2-10/+0
Signed-off-by: Rick Farrington <ricardo.farrington@cavium.com> Signed-off-by: Felix Manlunas <felix.manlunas@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-18net: inet: diag: expose sockets cgroup classidLevin, Alexander (Sasha Levin)2-0/+12
This is useful for directly looking up a task based on class id rather than having to scan through all open file descriptors. Signed-off-by: Sasha Levin <alexander.levin@verizon.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-18macvlan: add offload features for encapsulationDimitris Michailidis1-1/+2
Currently macvlan devices do not set their hw_enc_features making encapsulated Tx packets resort to SW fallbacks. Add encapsulation GSO offloads to ->features as is done for the other GSOs and set ->hw_enc_features. Signed-off-by: Dimitris Michailidis <dmichail@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-18liquidio: fix Smatch errorIntiyaz Basha1-2/+2
Fix Smatch error by not dereferencing iq pointer if it's NULL. See http://marc.info/?l=kernel-janitors&m=150296723301129&w=2 Also, remove unnecessary parentheses. Fixes: d314ac222829 ("liquidio: moved liquidio_napi_poll to lio_core.c") Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Intiyaz Basha <intiyaz.basha@cavium.com> Signed-off-by: Felix Manlunas <felix.manlunas@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-18ipv4: convert dst_metrics.refcnt from atomic_t to refcount_tEric Dumazet4-8/+9
refcount_t type and corresponding API should be used instead of atomic_t when the variable is used as a reference counter. This allows to avoid accidental refcounter overflows that might lead to use-after-free situations. Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-18Merge branch 'for-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth-nextDavid S. Miller8-66/+238
Johan Hedberg says: ==================== pull request: bluetooth-next 2017-08-18 Here's one more bluetooth-next pull request for the 4.14 kernel: - Multiple fixes for Broadcom controllers - Fixes to the bluecard HCI driver - New USB ID for Realtek RTL8723BE controller - Fix static analyzer warning with kfree Please let me know if there are any issues pulling. Thanks. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-18ipv6: fix false-postive maybe-uninitialized warningArnd Bergmann1-2/+4
Adding a lock around one of the assignments prevents gcc from tracking the state of the local 'fibmatch' variable, so it can no longer prove that 'dst' is always initialized, leading to a bogus warning: net/ipv6/route.c: In function 'inet6_rtm_getroute': net/ipv6/route.c:3659:2: error: 'dst' may be used uninitialized in this function [-Werror=maybe-uninitialized] This moves the other assignment into the same lock to shut up the warning. Fixes: 121622dba8da ("ipv6: route: make rtm_getroute not assume rtnl is locked") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-18Merge branch 'hns3-bug-fixes'David S. Miller2-40/+59
Salil Mehta says: ==================== Misc. Bug fixes for HNS3 Ethernet Driver This patch-set fixes various bugs reported by community. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-18net: hns3: Fixes the static check warning due to missing unsupp L3 proto checkSalil1-4/+10
This patch fixes the static check warning due to missing handling leg of unsupported L3 protocol type in the hns3_get_l4_protocol() function. Fixes: 76ad4f0ee747 ("net: hns3: Add support of HNS3 Ethernet Driver for hip08 SoC") Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Salil Mehta <salil.mehta@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-18net: hns3: Fixes the static checker error warning in hns3_get_link_ksettings()Salil1-36/+47
This patch fixes the static check error warning in hns3_get_link_ksettings() function by re-arranging the code. Fixes: 496d03e960ae ("net: hns3: Add Ethtool support to HNS3 Driver") Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Salil Mehta <salil.mehta@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-18net: hns3: Fixes the missing u64_stats_fetch_begin_irq in 64-bit stats fetchSalil1-0/+2
This patch fixes the missing u64_stats_fetch_begin_irq() while trying to atomically do 64-bit RX/TX fetch. We did not get any error during test as our SoC is 64-bit so all of these seq/lock operations results in NOOP. As such, this seq lock supports has been added for the sake of completion if this code ever runs on 32-bit platform and we are trying to do 64-bit stats fetch. Fixes: 76ad4f0ee747 ("net: hns3: Add support of HNS3 Ethernet Driver for hip08 SoC") Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Salil Mehta <salil.mehta@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-18net/sched: Fix the logic error to decide the ingress qdiscChris Mi6-6/+6
The offending commit used a newly added helper function. But the logic is wrong. Without this fix, the affected NICs can't do HW offload. Error -EOPNOTSUPP will be returned directly. Fixes: a2e8da9378cc ("net/sched: use newly added classid identity helpers") Signed-off-by: Chris Mi <chrism@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-18Merge branch 's390-qeth-next'David S. Miller4-139/+204
Julian Wiedmann says: ==================== s390/net: more updates for 4.14 please apply another batch of qeth patches for net-next. This reworks the xmit path for L2 OSAs to use skb_cow_head() instead of skb_realloc_headroom(). ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-18s390/qeth: use skb_cow_head() for L2 OSA xmitJulian Wiedmann3-21/+64
Taking a full copy via skb_realloc_headroom() on every xmit is overkill and wastes CPU time; all we actually need is to push on the qeth_hdr. So rework the L2 OSA TX path to avoid the copy. Minor complications arise because struct qeth_hdr must not cross a page boundary. So add a new helper qeth_push_hdr() that catches this, and falls back to the hdr cache that we already use for IQDs. This change uncovered that qeth's TX completion takes rather long. Now that we no longer free the original skb straight away and thus call skb->destructor later than before, throughput regresses significantly. For now, restore old behaviour by adding an explicit skb_orphan(), and a big TODO to improve the TX completion time. Tested-by: Nils Hoppmann <niho@de.ibm.com> Signed-off-by: Julian Wiedmann <jwi@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Copyright © 1996 – 2026 Jason A. Donenfeld. All Rights Reverse Engineered.