aboutsummaryrefslogtreecommitdiffstats
AgeCommit message (Collapse)AuthorFilesLines
2017-02-16ixgbe: Make use of order 1 pages and 3K buffers independent of FCoEAlexander Duyck2-17/+22
In order to support build_skb with jumbo frames it will be necessary to use 3K buffers for the Rx path with 8K pages backing them. This is needed on architectures that implement 4K pages because we can't support 2K buffers plus padding in a 4K page. In the case of systems that support page sizes larger than 4K the 3K attribute will only be applied to FCoE as we can fall back to using just 2K buffers and adding the padding. Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2017-02-16ixgbe: Update code to better handle incrementing page countAlexander Duyck2-15/+31
Batch the page count updates instead of doing them one at a time. By doing this we can improve the overall performance as the atomic increment operations can be expensive due to the fact that on x86 they are locked operations which can cause stalls. By doing bulk updates we can consolidate the stall which should help to improve the overall receive performance. Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Acked-by: John Fastabend <john.r.fastabend@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2017-02-16ixgbe: Update driver to make use of DMA attributes in Rx pathAlexander Duyck2-19/+40
This patch adds support for DMA_ATTR_SKIP_CPU_SYNC and DMA_ATTR_WEAK_ORDERING. By enabling both of these for the Rx path we are able to see performance improvements on architectures that implement either one due to the fact that page mapping and unmapping only has to sync what is actually being used instead of the entire buffer. In addition by enabling the weak ordering attribute enables a performance improvement for architectures that can associate a memory ordering with a DMA buffer such as Sparc. Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2017-02-16ixgbe: Only DMA sync frame lengthAlexander Duyck1-5/+5
On some platforms, syncing a buffer for DMA is expensive. Rather than sync the whole 2K receive buffer, only synchronise the length of the frame, which will typically be the MTU, or a much smaller TCP ACK. Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2017-02-16ixgbe: Add function for checking to see if we can reuse pageAlexander Duyck1-29/+42
This patch consolidates the code for the ixgbe driver so that it is more inline with what is already in igb. The general idea is to just consolidate functions that represent logical steps in the Rx process so we can later update them more easily. Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2017-02-16ixgbe: Update version to reflect added functionalityMark Rustad1-1/+1
Update the driver version to reflect the new devices that it supports. Signed-off-by: Mark Rustad <mark.d.rustad@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2017-02-16ixgbe: prefix Data Center Bridge ops structStephen Hemminger3-3/+3
Since dcbnl_ops is global, it should be prefixed by ixgbe_ Signed-off-by: Stephen Hemminger <sthemmin@microsoft.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2017-02-16ixgbe: Support 2.5Gb and 5Gb speedTony Nguyen2-3/+10
Though not advertised through ethtool, if the link partner advertises a 2.5Gb or 5Gb connection, and the adapter supports it, allow the speed to be used. Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Tested-by: Krishneil Singh <krishneil.k.singh@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2017-02-15rhashtable: Revert nested table changes.David S. Miller5-316/+94
This reverts commits: 6a25478077d987edc5e2f880590a2bc5fcab4441 9dbbfb0ab6680c6a85609041011484e6658e7d3c 40137906c5f55c252194ef5834130383e639536f It's too risky to put in this late in the release cycle. We'll put these changes into the next merge window instead. Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-15ibmvnic: Fix endian errors in error reporting outputThomas Falcon1-4/+4
Error reports received from firmware were not being converted from big endian values, leading to bogus error codes reported on little endian systems. Signed-off-by: Thomas Falcon <tlfalcon@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-15ibmvnic: Fix endian error when requesting device capabilitiesThomas Falcon1-2/+2
When a vNIC client driver requests a faulty device setting, the server returns an acceptable value for the client to request. This 64 bit value was incorrectly being swapped as a 32 bit value, resulting in loss of data. This patch corrects that by using the 64 bit swap function. Signed-off-by: Thomas Falcon <tlfalcon@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-15atm: idt77252, use setup_timer and mod_timerJan Koniarik1-9/+3
Stop accessing timer struct members directly and use setup_timer and mod_timer helpers intended for that use. It makes the code cleaner and will allow for easier change of the timer struct internals. Signed-off-by: Jan Koniarik <jan.koniarik@trustica.cz> Signed-off-by: Jiri Slaby <jslaby@suse.cz> Cc: Chas Williams <3chas3@gmail.com> Cc: <linux-atm-general@lists.sourceforge.net> Cc: <netdev@vger.kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-15mlxsw: acl: Use PBS type for forward actionJiri Pirko1-11/+9
Current behaviour of "mirred redirect" action (forward) offload is a bit odd. For matched packets the action forwards them to the desired destination, but it also lets the packet duplicates to go the original way down (bridge, router, etc). That is more like "mirred mirror". Fix this by using PBS type which behaves exactly like "mirred redirect". Note that PBS does not support loopback mode. Fixes: 4cda7d8d7098 ("mlxsw: core: Introduce flexible actions support") Signed-off-by: Jiri Pirko <jiri@mellanox.com> Reviewed-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-15Merge branch 'stmmac-misc'David S. Miller3-69/+71
Corentin Labbe says: ==================== stmmac: misc patchs This is a follow up of my previous stmmac serie which address some comment done in v2. ==================== Acked-by: Giuseppe Cavallaro <peppe.cavallaro@st.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-15net: stmmac: invert the logic for dumping regsLABBE Corentin1-9/+9
It is easier to follow the logic by removing the not operator Signed-off-by: Corentin Labbe <clabbe.montjoie@gmail.com> Acked-by: Giuseppe Cavallaro <peppe.cavallaro@st.com> Reviewed-by: Giuseppe Cavallaro <peppe.cavallaro@st.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-15net: stmmac: reduce indentation by adding a continueLABBE Corentin1-42/+40
As suggested by Joe Perches, replacing the "if phydev" logic permit to reduce indentation in the for loop. Signed-off-by: Corentin Labbe <clabbe.montjoie@gmail.com> Acked-by: Giuseppe Cavallaro <peppe.cavallaro@st.com> Reviewed-by: Giuseppe Cavallaro <peppe.cavallaro@st.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-15net: stmmac: split the stmmac_adjust_link 10/100 caseLABBE Corentin1-5/+9
The 10/100 case have too many ifcase. This patch split it for removing an if. Signed-off-by: Corentin Labbe <clabbe.montjoie@gmail.com> Acked-by: Giuseppe Cavallaro <peppe.cavallaro@st.com> Reviewed-by: Giuseppe Cavallaro <peppe.cavallaro@st.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-15net: stmmac: run stmmac_hw_fix_mac_speed when speed is validLABBE Corentin1-3/+2
This patch mutualise a bit by running stmmac_hw_fix_mac_speed() after the switch in case of valid speed. Signed-off-by: Corentin Labbe <clabbe.montjoie@gmail.com> Acked-by: Giuseppe Cavallaro <peppe.cavallaro@st.com> Reviewed-by: Giuseppe Cavallaro <peppe.cavallaro@st.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-15net: stmmac: set speed at SPEED_UNKNOWN in case of broken speedLABBE Corentin1-0/+1
In case of invalid speed given, stmmac_adjust_link() still record it as current speed. This patch modify the default case to set speed as SPEED_UNKNOWN if not 10/100/1000. Signed-off-by: Corentin Labbe <clabbe.montjoie@gmail.com> Acked-by: Giuseppe Cavallaro <peppe.cavallaro@st.com> Reviewed-by: Giuseppe Cavallaro <peppe.cavallaro@st.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-15net: stmmac: use SPEED_UNKNOWN/DUPLEX_UNKNOWNLABBE Corentin1-6/+6
It is better to use DUPLEX_UNKNOWN instead of just "-1". Using 0 for an invalid speed is bad since 0 is a valid value for speed. So this patch replace 0 by SPEED_UNKNOWN. Signed-off-by: Corentin Labbe <clabbe.montjoie@gmail.com> Acked-by: Giuseppe Cavallaro <peppe.cavallaro@st.com> Reviewed-by: Giuseppe Cavallaro <peppe.cavallaro@st.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-15net: stmmac: likely is useless in occasional functionLABBE Corentin1-4/+4
The stmmac_adjust_link() function is called too rarely for having likely() macros being useful. Just remove likely annotation in it. Signed-off-by: Corentin Labbe <clabbe.montjoie@gmail.com> Acked-by: Giuseppe Cavallaro <peppe.cavallaro@st.com> Reviewed-by: Giuseppe Cavallaro <peppe.cavallaro@st.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-15net: stmmac: remove useless parenthesisLABBE Corentin2-5/+5
This patch remove some useless parenthesis. Signed-off-by: Corentin Labbe <clabbe.montjoie@gmail.com> Acked-by: Giuseppe Cavallaro <peppe.cavallaro@st.com> Reviewed-by: Giuseppe Cavallaro <peppe.cavallaro@st.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-15net: ethernet: aquantia: switch to pci_alloc_irq_vectorsChristoph Hellwig1-76/+25
pci_enable_msix has been long deprecated, but this driver adds a new instance. Convert it to pci_alloc_irq_vectors so that no new instance of the deprecated function reaches mainline. Signed-off-by: Christoph Hellwig <hch@lst.de> Tested-by: Pavel Belous <pavel.belous@aquantia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-15Merge branch 'qed-ptp'David S. Miller17-2/+1108
Yuval Mintz says: ==================== qed*: Add support for PTP This patch series adds required changes for qed/qede drivers for supporting the IEEE Precision Time Protocol (PTP). Changes from previous versions: v7: Fixed Kbuild robot warnings. v6: Corrected broken loop iteration in previous version. Reduced approximation error of adjfreq. v5: Removed two divisions from the adjust-frequency loop. Resulting logic would use 8 divisions [instead of 24]. v4: Remove the loop iteration for value '0' in the qed_ptp_hw_adjfreq() implementation. v3: Use div_s64 for 64-bit divisions as do_div gives error for signed types. Incorporated review comments from Richard Cochran. - Clear timestamp resgisters as soon as timestamp is read. - Use shift operation in the place of 'divide by 16'. v2: Use do_div for 64-bit divisions. ==================== Acked-by: Richard Cochran <richardcochran@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-15qede: Add driver support for PTPSudarsana Reddy Kalluru8-1/+661
This patch adds the driver support for, - Registering the ptp clock functionality with the OS. - Timestamping the Rx/Tx PTP packets. - Ethtool callbacks related to PTP. Signed-off-by: Sudarsana Reddy Kalluru <Sudarsana.Kalluru@cavium.com> Signed-off-by: Yuval Mintz <Yuval.Mintz@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-15qed: Add infrastructure for PTP supportSudarsana Reddy Kalluru9-1/+447
The patch adds the required qed interfaces for configuring/reading the PTP clock on the adapter. Signed-off-by: Sudarsana Reddy Kalluru <Sudarsana.Kalluru@cavium.com> Signed-off-by: Yuval Mintz <Yuval.Mintz@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-15cxgb4: Update proper netdev stats for rx dropsGanesh Goudar1-1/+1
Count buffer group drops or truncates as rx drops rather than rx errors in netdev stats. Signed-off-by: Ganesh Goudar <ganeshgr@chelsio.com> Signed-off-by: Arjun V <arjun@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-15openvswitch: Set internal device max mtu to ETH_MAX_MTU.Jarno Rajahalme1-0/+2
Commit 91572088e3fd ("net: use core MTU range checking in core net infra") changed the openvswitch internal device to use the core net infra for controlling the MTU range, but failed to actually set the max_mtu as described in the commit message, which now defaults to ETH_DATA_LEN. This patch fixes this by setting max_mtu to ETH_MAX_MTU after ether_setup() call. Fixes: 91572088e3fd ("net: use core MTU range checking in core net infra") Signed-off-by: Jarno Rajahalme <jarno@ovn.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-15net: neigh: Fix netevent NETEVENT_DELAY_PROBE_TIME_UPDATE notificationMarcus Huewe1-1/+2
When setting a neigh related sysctl parameter, we always send a NETEVENT_DELAY_PROBE_TIME_UPDATE netevent. For instance, when executing sysctl net.ipv6.neigh.wlp3s0.retrans_time_ms=2000 a NETEVENT_DELAY_PROBE_TIME_UPDATE netevent is generated. This is caused by commit 2a4501ae18b5 ("neigh: Send a notification when DELAY_PROBE_TIME changes"). According to the commit's description, it was intended to generate such an event when setting the "delay_first_probe_time" sysctl parameter. In order to fix this, only generate this event when actually setting the "delay_first_probe_time" sysctl parameter. This fix should not have any unintended side-effects, because all but one registered netevent callbacks check for other netevent event types (the registered callbacks were obtained by grepping for "register_netevent_notifier"). The only callback that uses the NETEVENT_DELAY_PROBE_TIME_UPDATE event is mlxsw_sp_router_netevent_event() (in drivers/net/ethernet/mellanox/mlxsw/spectrum_router.c): in case of this event, it only accesses the DELAY_PROBE_TIME of the passed neigh_parms. Fixes: 2a4501ae18b5 ("neigh: Send a notification when DELAY_PROBE_TIME changes") Signed-off-by: Marcus Huewe <suse-tux@gmx.de> Reviewed-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-15sched: have stub for tcf_destroy_chain in case NET_CLS is not configuredJiri Pirko1-0/+6
This fixes broken build for !NET_CLS: net/built-in.o: In function `fq_codel_destroy': /home/sab/linux/net-next/net/sched/sch_fq_codel.c:468: undefined reference to `tcf_destroy_chain' Fixes: cf1facda2f61 ("sched: move tcf_proto_destroy and tcf_destroy_chain helpers into cls_api") Reported-by: Sabrina Dubroca <sd@queasysnail.net> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Tested-by: Sabrina Dubroca <sd@queasysnail.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-15net: xilinx_emaclite: fix freezes due to unordered I/OAnssi Hannula1-54/+62
The xilinx_emaclite uses __raw_writel and __raw_readl for register accesses. Those functions do not imply any kind of memory barriers and they may be reordered. The driver does not seem to take that into account, though, and the driver does not satisfy the ordering requirements of the hardware. For clear examples, see xemaclite_mdio_write() and xemaclite_mdio_read() which try to set MDIO address before initiating the transaction. I'm seeing system freezes with the driver with GCC 5.4 and current Linux kernels on Zynq-7000 SoC immediately when trying to use the interface. In commit 123c1407af87 ("net: emaclite: Do not use microblaze and ppc IO functions") the driver was switched from non-generic in_be32/out_be32 (memory barriers, big endian) to __raw_readl/__raw_writel (no memory barriers, native endian), so apparently the device follows system endianness and the driver was originally written with the assumption of memory barriers. Rather than try to hunt for each case of missing barrier, just switch the driver to use iowrite32/ioread32/iowrite32be/ioread32be depending on endianness instead. Tested on little-endian Zynq-7000 ARM SoC FPGA. Signed-off-by: Anssi Hannula <anssi.hannula@bitwise.fi> Fixes: 123c1407af87 ("net: emaclite: Do not use microblaze and ppc IO functions") Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-15net: xilinx_emaclite: fix receive buffer overflowAnssi Hannula1-3/+7
xilinx_emaclite looks at the received data to try to determine the Ethernet packet length but does not properly clamp it if proto_type == ETH_P_IP or 1500 < proto_type <= 1518, causing a buffer overflow and a panic via skb_panic() as the length exceeds the allocated skb size. Fix those cases. Also add an additional unconditional check with WARN_ON() at the end. Signed-off-by: Anssi Hannula <anssi.hannula@bitwise.fi> Fixes: bb81b2ddfa19 ("net: add Xilinx emac lite device driver") Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-15bpf: Rebuild bpf.o for any dependency updateMickaël Salaün1-2/+13
This is needed to force a rebuild of bpf.o when one of its dependencies (e.g. uapi/linux/bpf.h) is updated. Add a phony target. Signed-off-by: Mickaël Salaün <mic@digikod.net> Cc: Alexei Starovoitov <ast@fb.com> Cc: Daniel Borkmann <daniel@iogearbox.net> Cc: David S. Miller <davem@davemloft.net> Cc: Wang Nan <wangnan0@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-15bpf: Remove redundant ifdefMickaël Salaün1-9/+3
Remove a useless ifdef __NR_bpf as requested by Wang Nan. Inline one-line static functions as it was in the bpf_sys.h file. Signed-off-by: Mickaël Salaün <mic@digikod.net> Cc: Alexei Starovoitov <ast@fb.com> Cc: Daniel Borkmann <daniel@iogearbox.net> Cc: David S. Miller <davem@davemloft.net> Cc: Wang Nan <wangnan0@huawei.com> Link: https://lkml.kernel.org/r/828ab1ff-4dcf-53ff-c97b-074adb895006@huawei.com Acked-by: Wang Nan <wangnan0@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-15mlx4: do not use rwlock in fast pathEric Dumazet2-18/+19
Using a reader-writer lock in fast path is silly, when we can instead use RCU or a seqlock. For mlx4 hwstamp clock, a seqlock is the way to go, removing two atomic operations and false sharing. Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Tariq Toukan <tariqt@mellanox.com> Reviewed-by: Tariq Toukan <tariqt@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-15PCI/PME: Restore pcie_pme_driver.removeYinghai Lu1-0/+12
In addition to making PME non-modular, d7def2040077 ("PCI/PME: Make explicitly non-modular") removed the pcie_pme_driver .remove() method, pcie_pme_remove(). pcie_pme_remove() freed the PME IRQ that was requested in pci_pme_probe(). The fact that we don't free the IRQ after d7def2040077 causes the following crash when removing a PCIe port device via /sys: ------------[ cut here ]------------ kernel BUG at drivers/pci/msi.c:370! invalid opcode: 0000 [#1] SMP Modules linked in: CPU: 1 PID: 14509 Comm: sh Tainted: G W 4.8.0-rc1-yh-00012-gd29438d RIP: 0010:[<ffffffff9758bbf5>] free_msi_irqs+0x65/0x190 ... Call Trace: [<ffffffff9758cda4>] pci_disable_msi+0x34/0x40 [<ffffffff97583817>] cleanup_service_irqs+0x27/0x30 [<ffffffff97583e9a>] pcie_port_device_remove+0x2a/0x40 [<ffffffff97584250>] pcie_portdrv_remove+0x40/0x50 [<ffffffff97576d7b>] pci_device_remove+0x4b/0xc0 [<ffffffff9785ebe6>] __device_release_driver+0xb6/0x150 [<ffffffff9785eca5>] device_release_driver+0x25/0x40 [<ffffffff975702e4>] pci_stop_bus_device+0x74/0xa0 [<ffffffff975704ea>] pci_stop_and_remove_bus_device_locked+0x1a/0x30 [<ffffffff97578810>] remove_store+0x50/0x70 [<ffffffff9785a378>] dev_attr_store+0x18/0x30 [<ffffffff97260b64>] sysfs_kf_write+0x44/0x60 [<ffffffff9725feae>] kernfs_fop_write+0x10e/0x190 [<ffffffff971e13f8>] __vfs_write+0x28/0x110 [<ffffffff970b0fa4>] ? percpu_down_read+0x44/0x80 [<ffffffff971e53a7>] ? __sb_start_write+0xa7/0xe0 [<ffffffff971e53a7>] ? __sb_start_write+0xa7/0xe0 [<ffffffff971e1f04>] vfs_write+0xc4/0x180 [<ffffffff971e3089>] SyS_write+0x49/0xa0 [<ffffffff97001a46>] do_syscall_64+0xa6/0x1b0 [<ffffffff9819201e>] entry_SYSCALL64_slow_path+0x25/0x25 ... RIP [<ffffffff9758bbf5>] free_msi_irqs+0x65/0x190 RSP <ffff89ad3085bc48> ---[ end trace f4505e1dac5b95d3 ]--- Segmentation fault Restore pcie_pme_remove(). [bhelgaas: changelog] Fixes: d7def2040077 ("PCI/PME: Make explicitly non-modular") Signed-off-by: Yinghai Lu <yinghai@kernel.org> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> CC: stable@vger.kernel.org # v4.9+
2017-02-15Merge ath-next from git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/ath.gitKalle Valo17-170/+140
ath.git patches for 4.11. Major changes: ath10k * when trying older firmware versions don't confuse user with error messages ath9k * fix crash in AP mode (regression) * fix relayfs crash (regression) * fix initialisation with AR9340 and AR9550
2017-02-15esp: Add a software GRO codepathSteffen Klassert12-7/+288
This patch adds GRO ifrastructure and callbacks for ESP on ipv4 and ipv6. In case the GRO layer detects an ESP packet, the esp{4,6}_gro_receive() function does a xfrm state lookup and calls the xfrm input layer if it finds a matching state. The packet will be decapsulated and reinjected it into layer 2. Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
2017-02-15xfrm: Extend the sec_path for IPsec offloadingSteffen Klassert2-0/+43
We need to keep per packet offloading informations across the layers. So we extend the sec_path to carry these for the input and output offload codepath. Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
2017-02-15fuse: fix use after free issue in fuse_dev_do_read()Sahitya Tummala1-0/+4
There is a potential race between fuse_dev_do_write() and request_wait_answer() contexts as shown below: TASK 1: __fuse_request_send(): |--spin_lock(&fiq->waitq.lock); |--queue_request(); |--spin_unlock(&fiq->waitq.lock); |--request_wait_answer(): |--if (test_bit(FR_SENT, &req->flags)) <gets pre-empted after it is validated true> TASK 2: fuse_dev_do_write(): |--clears bit FR_SENT, |--request_end(): |--sets bit FR_FINISHED |--spin_lock(&fiq->waitq.lock); |--list_del_init(&req->intr_entry); |--spin_unlock(&fiq->waitq.lock); |--fuse_put_request(); |--queue_interrupt(); <request gets queued to interrupts list> |--wake_up_locked(&fiq->waitq); |--wait_event_freezable(); <as FR_FINISHED is set, it returns and then the caller frees this request> Now, the next fuse_dev_do_read(), see interrupts list is not empty and then calls fuse_read_interrupt() which tries to access the request which is already free'd and gets the below crash: [11432.401266] Unable to handle kernel paging request at virtual address 6b6b6b6b6b6b6b6b ... [11432.418518] Kernel BUG at ffffff80083720e0 [11432.456168] PC is at __list_del_entry+0x6c/0xc4 [11432.463573] LR is at fuse_dev_do_read+0x1ac/0x474 ... [11432.679999] [<ffffff80083720e0>] __list_del_entry+0x6c/0xc4 [11432.687794] [<ffffff80082c65e0>] fuse_dev_do_read+0x1ac/0x474 [11432.693180] [<ffffff80082c6b14>] fuse_dev_read+0x6c/0x78 [11432.699082] [<ffffff80081d5638>] __vfs_read+0xc0/0xe8 [11432.704459] [<ffffff80081d5efc>] vfs_read+0x90/0x108 [11432.709406] [<ffffff80081d67f0>] SyS_read+0x58/0x94 As FR_FINISHED bit is set before deleting the intr_entry with input queue lock in request completion path, do the testing of this flag and queueing atomically with the same lock in queue_interrupt(). Signed-off-by: Sahitya Tummala <stummala@codeaurora.org> Signed-off-by: Miklos Szeredi <mszeredi@redhat.com> Fixes: fd22d62ed0c3 ("fuse: no fc->lock for iqueue parts") Cc: <stable@vger.kernel.org> # 4.2+
2017-02-15ath9k: use correct OTP register offsets for the AR9340 and AR9550Christian Lamparter1-2/+2
This patch fixes the OTP register definitions for the AR934x and AR9550 WMAC SoC. Previously, the ath9k driver was unable to initialize the integrated WMAC on an Aerohive AP121: | ath: phy0: timeout (1000 us) on reg 0x30018: 0xbadc0ffe & 0x00000007 != 0x00000004 | ath: phy0: timeout (1000 us) on reg 0x30018: 0xbadc0ffe & 0x00000007 != 0x00000004 | ath: phy0: Unable to initialize hardware; initialization status: -5 | ath9k ar934x_wmac: failed to initialize device | ath9k: probe of ar934x_wmac failed with error -5 It turns out that the AR9300_OTP_STATUS and AR9300_OTP_DATA definitions contain a typo. Cc: Gabor Juhos <juhosg@openwrt.org> Cc: stable@vger.kernel.org Fixes: add295a4afbdf5852d0 "ath9k: use correct OTP register offsets for AR9550" Signed-off-by: Christian Lamparter <chunkeey@googlemail.com> Signed-off-by: Chris Blake <chrisrblake93@gmail.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2017-02-15rt2500usb: don't mark register accesses as inlineArnd Bergmann1-14/+5
When CONFIG_KASAN is set, we get a rather large stack here: drivers/net/wireless/ralink/rt2x00/rt2500usb.c: In function 'rt2500usb_set_device_state': drivers/net/wireless/ralink/rt2x00/rt2500usb.c:1074:1: error: the frame size of 3032 bytes is larger than 100 bytes [-Werror=frame-larger-than=] If we don't force those functions to be inline, the compiler can figure this out better itself and not inline the functions when doing so would be harmful, reducing the stack size to a merge 256 bytes. Note that there is another problem that manifests in this driver, as a result of the typecheck() macro causing even larger stack frames. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-02-15brcmfmac: Use net_device_stats from struct net_deviceTobias Klauser2-20/+8
Instead of using a private copy of struct net_device_stats in struct brcm_if, use stats from struct net_device. Also remove the now unnecessary .ndo_get_stats function. Signed-off-by: Tobias Klauser <tklauser@distanz.ch> Acked-by: Arend van Spriel <arend.vanspriel@broadcom.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-02-15rtlwifi: btcoexist: Fix if == else warnings in halbtc8723b1ant.cLarry Finger1-20/+4
The 0-DAY kernel test infrastructure reports the following: drivers/net/wireless/realtek/rtlwifi/btcoexist/halbtc8723b1ant.c:1875:2-4: WARNING: possible condition with no effect (if == else) drivers/net/wireless/realtek/rtlwifi/btcoexist/halbtc8723b1ant.c:2253:3-5: WARNING: possible condition with no effect (if == else) Reported-by: kbuild-all@01.org Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Cc: Julia Lawall <julia.lawall@lip6.fr> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-02-15rtlwifi: btcoexist: Fix if == else warnings in halbtc8821a1ant.cLarry Finger1-15/+3
The 0-DAY kernel test infrastructure reports the following: drivers/net/wireless/realtek/rtlwifi/btcoexist/halbtc8821a1ant.c:1771:1-3: WARNING: possible condition with no effect (if == else) drivers/net/wireless/realtek/rtlwifi/btcoexist/halbtc8821a1ant.c:2126:3-5: WARNING: possible condition with no effect (if == else) Reported-by: kbuild-all@01.org Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Cc: Julia Lawall <julia.lawall@lip6.fr> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-02-15rtlwifi: btcoexist: Fix if == else warnings in halbtc8821a2ant.cLarry Finger1-161/+24
The 0-DAY kernel test infrastructure reports the following: drivers/net/wireless/realtek/rtlwifi/btcoexist/halbtc8821a2ant.c:3023:1-3: WARNING: possible condition with no effect (if == else) drivers/net/wireless/realtek/rtlwifi/btcoexist/halbtc8821a2ant.c:3035:2-4: WARNING: possible condition with no effect (if == else) drivers/net/wireless/realtek/rtlwifi/btcoexist/halbtc8821a2ant.c:3037:3-5: WARNING: possible condition with no effect (if == else) drivers/net/wireless/realtek/rtlwifi/btcoexist/halbtc8821a2ant.c:3047:3-5: WARNING: possible condition with no effect (if == else) drivers/net/wireless/realtek/rtlwifi/btcoexist/halbtc8821a2ant.c:3075:3-5: WARNING: possible condition with no effect (if == else) drivers/net/wireless/realtek/rtlwifi/btcoexist/halbtc8821a2ant.c:3085:3-5: WARNING: possible condition with no effect (if == else) drivers/net/wireless/realtek/rtlwifi/btcoexist/halbtc8821a2ant.c:3129:1-3: WARNING: possible condition with no effect (if == else) drivers/net/wireless/realtek/rtlwifi/btcoexist/halbtc8821a2ant.c:3141:2-4: WARNING: possible condition with no effect (if == else) drivers/net/wireless/realtek/rtlwifi/btcoexist/halbtc8821a2ant.c:3143:3-5: WARNING: possible condition with no effect (if == else) drivers/net/wireless/realtek/rtlwifi/btcoexist/halbtc8821a2ant.c:3153:3-5: WARNING: possible condition with no effect (if == else) drivers/net/wireless/realtek/rtlwifi/btcoexist/halbtc8821a2ant.c:3179:2-4: WARNING: possible condition with no effect (if == else) drivers/net/wireless/realtek/rtlwifi/btcoexist/halbtc8821a2ant.c:3181:3-5: WARNING: possible condition with no effect (if == else) drivers/net/wireless/realtek/rtlwifi/btcoexist/halbtc8821a2ant.c:3192:3-5: WARNING: possible condition with no effect (if == else) drivers/net/wireless/realtek/rtlwifi/btcoexist/halbtc8821a2ant.c:2677:1-3: WARNING: possible condition with no effect (if == else) drivers/net/wireless/realtek/rtlwifi/btcoexist/halbtc8821a2ant.c:2833:1-3: WARNING: possible condition with no effect (if == else) drivers/net/wireless/realtek/rtlwifi/btcoexist/halbtc8821a2ant.c:2847:3-5: WARNING: possible condition with no effect (if == else) drivers/net/wireless/realtek/rtlwifi/btcoexist/halbtc8821a2ant.c:2857:3-5: WARNING: possible condition with no effect (if == else) drivers/net/wireless/realtek/rtlwifi/btcoexist/halbtc8821a2ant.c:2885:3-5: WARNING: possible condition with no effect (if == else) drivers/net/wireless/realtek/rtlwifi/btcoexist/halbtc8821a2ant.c:2895:3-5: WARNING: possible condition with no effect (if == else) drivers/net/wireless/realtek/rtlwifi/btcoexist/halbtc8821a2ant.c:2940:1-3: WARNING: possible condition with no effect (if == else) drivers/net/wireless/realtek/rtlwifi/btcoexist/halbtc8821a2ant.c:2788:2-4: WARNING: possible condition with no effect (if == else) drivers/net/wireless/realtek/rtlwifi/btcoexist/halbtc8821a2ant.c:2391:2-4: WARNING: possible condition with no effect (if == else) drivers/net/wireless/realtek/rtlwifi/btcoexist/halbtc8821a2ant.c:2417:2-4: WARNING: possible condition with no effect (if == else) Reported-by: kbuild-all@01.org Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Cc: Julia Lawall <julia.lawall@lip6.fr> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-02-15mwifiex: don't enable/disable IRQ 0 during suspend/resumeBrian Norris1-4/+4
If we don't have an out-of-band wakeup IRQ configured through DT (as most platforms don't), then we fall out of this function with 'irq_wakeup == 0'. Other code (e.g., mwifiex_disable_wake() and mwifiex_enable_wake()) treats 'irq_wakeup >= 0' as a valid IRQ, and so we end up calling {enable,disable}_irq() on IRQ 0. That seems bad, so let's not do that. Same problem as fixed in this patch: https://patchwork.kernel.org/patch/9531693/ [PATCH v2 2/3] btmrvl: set irq_bt to -1 when failed to parse it with the difference that: (a) this one is actually a regression and (b) this affects both device tree and non-device-tree systems While fixing the regression, also drop the verbosity on the parse failure, so we don't see this when a DT node is present but doesn't have an interrupt property (this is perfectly legal): [ 21.999000] mwifiex_pcie 0000:01:00.0: fail to parse irq_wakeup from device tree Fixes: 853402a00823 ("mwifiex: Enable WoWLAN for both sdio and pcie") Signed-off-by: Brian Norris <briannorris@chromium.org> Acked-by: Rajat Jain <rajatja@google.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-02-15orinoco: Use net_device_stats from struct net_deviceTobias Klauser3-26/+9
Instead of using a private copy of struct net_device_stats in struct orinoco_private, use stats from struct net_device. Also remove the now unnecessary .ndo_get_stats function. Signed-off-by: Tobias Klauser <tklauser@distanz.ch> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-02-15rtlwifi: btcoexist: fix semicolon.cocci warningsJulia Lawall1-1/+1
Remove unneeded semicolon. Generated by: scripts/coccinelle/misc/semicolon.cocci CC: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: Julia Lawall <julia.lawall@lip6.fr> Signed-off-by: Fengguang Wu <fengguang.wu@intel.com> Acked-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-02-15wlcore: disable multicast filter in AP modeIain Hunter1-0/+15
Enable AP support for allmulticast for MDNS. It can be enabled by bringing up the interface with ip command with argument allmulticast on Signed-off-by: Iain Hunter <i-hunter1@ti.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.