aboutsummaryrefslogtreecommitdiffstats
AgeCommit message (Collapse)AuthorFilesLines
2012-05-29leds: add new transient trigger for one shot timer activationShuah Khan4-0/+398
The leds timer trigger does not currently have an interface to activate a one shot timer. The current support allows for setting two timers, one for specifying how long a state to be on, and the second for how long the state to be off. The delay_on value specifies the time period an LED should stay in on state, followed by a delay_off value that specifies how long the LED should stay in off state. The on and off cycle repeats until the trigger gets deactivated. There is no provision for one time activation to implement features that require an on or off state to be held just once and then stay in the original state forever. Without one shot timer interface, user space can still use timer trigger to set a timer to hold a state, however when user space application crashes or goes away without deactivating the timer, the hardware will be left in that state permanently. As a specific example of this use-case, let's look at vibrate feature on phones. Vibrate function on phones is implemented using PWM pins on SoC or PMIC. There is a need to activate one shot timer to control the vibrate feature, to prevent user space crashes leaving the phone in vibrate mode permanently causing the battery to drain. This trigger exports three properties, activate, state, and duration When transient trigger is activated these properties are set to default values. - duration allows setting timer value in msecs. The initial value is 0. - activate allows activating and deactivating the timer specified by duration as needed. The initial and default value is 0. This will allow duration to be set after trigger activation. - state allows user to specify a transient state to be held for the specified duration. Signed-off-by: Shuah Khan <shuahkhan@gmail.com> Cc: Jonas Bonn <jonas@southpole.se> Cc: Richard Purdie <rpurdie@rpsys.net> Cc: NeilBrown <neilb@suse.de> Cc: Bryan Wu <bryan.wu@canonical.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-05-29leds: heartbeat: stop on shutdownAlexander Holler1-1/+27
A halted kernel should not show a heartbeat. [akpm@linux-foundation.org: checkpatch fixes] Signed-off-by: Alexander Holler <holler@ahsoftware.de> Cc: Shuah Khan <shuahkhan@gmail.com> Cc: Richard Purdie <rpurdie@rpsys.net> Cc: Bryan Wu <bryan.wu@canonical.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-05-29drivers/leds/leds-lm3530.c: simplify als configuration on initializationKim, Milo1-42/+58
For better code readability, ALS code is moved to new a function - lm3530_als_configure() Signed-off-by: Milo(Woogyom) Kim <milo.kim@ti.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Cc: Shreshtha Kumar SAHU <shreshthakumar.sahu@stericsson.com> Cc: Richard Purdie <rpurdie@rpsys.net> Cc: Bryan Wu <bryan.wu@canonical.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-05-29include/linux/led-lm3530.h: comment correction about the range of brightnessKim, Milo1-1/+1
max brightness is 127, so the range of brt_val should be from 0 to 127 Signed-off-by: Milo(Woogyom) Kim <milo.kim@ti.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Cc: Shreshtha Kumar SAHU <shreshthakumar.sahu@stericsson.com> Cc: Richard Purdie <rpurdie@rpsys.net> Cc: Bryan Wu <bryan.wu@canonical.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-05-29leds: change ledtrig-timer to use activated flagShuah Khan1-3/+3
Change existing timer trigger to use the new ->activated flag to set activate successful status in activate routine and check it in deactivate routine to do cleanup. Signed-off-by: Shuah Khan <shuahkhan@gmail.com> Cc: Richard Purdie <rpurdie@rpsys.net> Cc: Bryan Wu <bryan.wu@canonical.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-05-29leds: change existing triggers to use activated flagShuah Khan3-3/+9
Change existing triggers backlight, gpio, and heartbeat to use the new ->activated flag to set activate successful status in their activate routines and check it in their deactivate routines to do cleanup. Signed-off-by: Shuah Khan <shuahkhan@gmail.com> Cc: Richard Purdie <rpurdie@rpsys.net> Cc: Bryan Wu <bryan.wu@canonical.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-05-29leds: add new field to led_classdev struct to save activation stateShuah Khan1-0/+2
Add a new field to led_classdev to save activattion state after activate routine is successful. This saved state is used in deactivate routine to do cleanup such as removing device files, and free memory allocated during activation. Currently trigger_data not being null is used for this purpose. Existing triggers will need changes to use this new field. Signed-off-by: Shuah Khan <shuahkhan@gmail.com> Cc: Richard Purdie <rpurdie@rpsys.net> Cc: Bryan Wu <bryan.wu@canonical.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-05-29leds: Use kcalloc instead of kzalloc to allocate arrayThomas Meyer1-1/+1
The advantage of kcalloc is that will prevent integer overflows which could result from the multiplication of number of elements and size and it is also a bit nicer to read. The semantic patch that makes this change is available in https://lkml.org/lkml/2011/11/25/107 Signed-off-by: Thomas Meyer <thomas@m3y3r.de> Cc: Bryan Wu <bryan.wu@canonical.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-05-29leds: simple_strtoul() cleanupShuah Khan2-41/+28
led-class.c and ledtrig-timer.c still use simple_strtoul(). Change them to use kstrtoul() instead of obsolete simple_strtoul(). Also fix the existing int ret declaration to be ssize_t to match the return type for _store functions in ledtrig-timer.c. Signed-off-by: Shuah Khan <shuahkhan@gmail.com> Cc: Joe Perches <joe@perches.com> Cc: Richard Purdie <rpurdie@rpsys.net> Cc: Bryan Wu <bryan.wu@canonical.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-05-29leds: driver for DA9052/53 PMIC v2David Dajun Chen3-0/+223
LED Driver for Dialog Semiconductor DA9052/53 PMICs. [akpm@linux-foundation.org: make led_reg static] Signed-off-by: David Dajun Chen <dchen@diasemi.com> Signed-off-by: Ashish Jangam <ashish.jangam@kpitcummins.com> Reviewed-by: Lars-Peter Clausen <lars@metafoo.de> Cc: Richard Purdie <rpurdie@rpsys.net> Cc: Bryan Wu <bryan.wu@canonical.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-05-29drivers/leds/leds-lp5521.c: fix lp5521_read() error handlingDan Carpenter1-4/+8
Gcc 4.6.2 complains that: drivers/leds/leds-lp5521.c: In function `lp5521_load_program': drivers/leds/leds-lp5521.c:214:21: warning: `mode' may be used uninitialized in this function [-Wuninitialized] drivers/leds/leds-lp5521.c: In function `lp5521_probe': drivers/leds/leds-lp5521.c:788:5: warning: `buf' may be used uninitialized in this function [-Wuninitialized] drivers/leds/leds-lp5521.c:740:6: warning: `ret' may be used uninitialized in this function [-Wuninitialized] These are real problems if lp5521_read() returns an error. When that happens we should handle it, instead of ignoring it or doing a bitwise OR with all the other error codes and continuing. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Cc: Milo <Milo.Kim@ti.com> Cc: Richard Purdie <rpurdie@rpsys.net> Cc: Bryan Wu <bryan.wu@canonical.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-05-29backlight: tosa_lcd: use devm_ functionsJingoo Han1-5/+3
The devm_ functions allocate memory that is released when a driver detaches. This patch uses devm_kzalloc of these functions. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Cc: Dmitry Baryshkov <dbaryshkov@gmail.com> Cc: Richard Purdie <rpurdie@rpsys.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-05-29backlight: tosa_bl: use devm_ functionsJingoo Han1-6/+5
The devm_ functions allocate memory that is released when a driver detaches. This patch uses devm_kzalloc of these functions. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Cc: Dmitry Baryshkov <dbaryshkov@gmail.com> Cc: Richard Purdie <rpurdie@rpsys.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-05-29backlight: tdo24m: use devm_ functionsJingoo Han1-15/+6
The devm_ functions allocate memory that is released when a driver detaches. This patch uses devm_kzalloc of these functions. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Cc: Eric Miao <eric.y.miao@gmail.com> Cc: Richard Purdie <rpurdie@rpsys.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-05-29backlight: s6e63m0: use devm_ functionsJingoo Han1-10/+5
The devm_ functions allocate memory that is released when a driver detaches. This patch uses devm_kzalloc of these functions. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Cc: InKi Dae <inki.dae@samsung.com> Cc: Richard Purdie <rpurdie@rpsys.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-05-29backlight: ltv350qv: use devm_ functionsJingoo Han1-16/+7
The devm_ functions allocate memory that is released when a driver detaches. This patch uses devm_kzalloc of these functions. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Cc: Haavard Skinnemoen <hskinnemoen@gmail.com> Cc: Richard Purdie <rpurdie@rpsys.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-05-29backlight: lms283gf05: use devm_ functionsJingoo Han1-6/+3
The devm_ functions allocate memory that is released when a driver detaches. This patch uses devm_kzalloc of these functions. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Acked-by: Marek Vasut <marek.vasut@gmail.com> Cc: Richard Purdie <rpurdie@rpsys.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-05-29backlight: ld9040: use devm_ functionsJingoo Han1-8/+6
The devm_ functions allocate memory that is released when a driver detaches. This patch uses devm_kzalloc of these functions. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Cc: Donghwa Lee <dh09.lee@samsung.com> Cc: Richard Purdie <rpurdie@rpsys.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-05-29backlight: l4f00242t03: use devm_ functionsJingoo Han1-14/+11
The devm_ functions allocate memory that is released when a driver detaches. This patch uses devm_kzalloc of these functions. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Cc: Alberto Panizzo <alberto@amarulasolutions.com> Cc: Richard Purdie <rpurdie@rpsys.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-05-29backlight: ili9320: use devm_ functionsJingoo Han1-7/+2
The devm_ functions allocate memory that is released when a driver detaches. This patch uses devm_kzalloc of these functions. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Cc: Ben Dooks <ben-linux@fluff.org> Cc: Richard Purdie <rpurdie@rpsys.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-05-29backlight: corgi_lcd: use devm_ functionsJingoo Han1-8/+4
The devm_ functions allocate memory that is released when a driver detaches. This patch uses devm_kzalloc of these functions. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Cc: Eric Miao <eric.y.miao@gmail.com> Cc: Richard Purdie <rpurdie@rpsys.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-05-29backlight: ams369fg06: use devm_ functionsJingoo Han1-10/+5
The devm_ functions allocate memory that is released when a driver detaches. This patch uses devm_kzalloc of these functions. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Cc: Richard Purdie <rpurdie@rpsys.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-05-29backlight: adp8870: use devm_ functionsJingoo Han1-15/+7
The devm_ functions allocate memory that is released when a driver detaches. This patch uses devm_kzalloc of these functions. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Acked-by: Michael Hennerich <michael.hennerich@analog.com> Cc: Richard Purdie <rpurdie@rpsys.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-05-29backlight: adp8860: use devm_ functionsJingoo Han1-15/+7
The devm_ functions allocate memory that is released when a driver detaches. This patch uses devm_kzalloc of these functions. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Acked-by: Michael Hennerich <michael.hennerich@analog.com> Cc: Richard Purdie <rpurdie@rpsys.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-05-29backlight: initialize struct backlight_properties properlyCorentin Chary5-0/+5
In all these files, the .power field was never correctly initialized. Signed-off-by: Corentin Chary <corentin.chary@gmail.com> Cc: Jingoo Han <jg1.han@samsung.com> Cc: Dave Airlie <airlied@gmail.com> Cc: Richard Purdie <rpurdie@rpsys.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-05-29drivers/video/backlight/l4f00242t03.c: use pr_fmtJingoo Han1-0/+2
This driver uses pr_debug(), so provide it with the appropriate prefixing. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Cc: Alberto Panizzo <alberto@amarulasolutions.com> Cc: Richard Purdie <rpurdie@rpsys.net> Cc: Joe Perches <joe@perches.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-05-29backlight: progear: use pr_err() instead of printk()Jingoo Han1-2/+4
Use pr_err() instead of printk() to allow dynamic debugging. The pr_fmt prefix for pr_ macros is used. Also fix checkpatch warnings as below: WARNING: printk() should include KERN_ facility level [akpm@linux-foundation.org: use KBUILD_MODNAME, per Joe] Signed-off-by: Jingoo Han <jg1.han@samsung.com> Cc: Marcin Juszkiewicz <openembedded@haerwu.biz> Cc: Richard Purdie <rpurdie@rpsys.net> Cc: Joe Perches <joe@perches.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-05-29backlight: omap1: use pr_info() instead of printk()Jingoo Han1-1/+3
Use pr_info() instead of printk() to allow dynamic debugging. The pr_fmt prefix for pr_ macros is used. Also fix checkpatch warning as below: WARNING: Prefer pr_info(... to printk(KERN_INFO, ... [akpm@linux-foundation.org: use KBUILD_MODNAME, per Joe] Signed-off-by: Jingoo Han <jg1.han@samsung.com> Cc: Andrzej Zaborowski <balrogg@gmail.com> Cc: Richard Purdie <rpurdie@rpsys.net> Cc: Joe Perches <joe@perches.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-05-29backlight: jornada720: use pr_err()/pr_info() instead of printk()Jingoo Han2-9/+13
Use pr_err()/pr_info() instead of printk() to allow dynamic debugging. The pr_fmt prefix for pr_ macros is used. Also fix checkpatch warnings as below: WARNING: Prefer pr_err(... to printk(KERN_ERR, ... WARNING: Prefer pr_info(... to printk(KERN_INFO, ... [akpm@linux-foundation.org: use KBUILD_MODNAME, per Joe] Signed-off-by: Jingoo Han <jg1.han@samsung.com> Acked-by: Kristoffer Ericson <kristoffer.ericson@gmail.com> Cc: Richard Purdie <rpurdie@rpsys.net> Cc: Joe Perches <joe@perches.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-05-29backlight: generic_bl: use pr_info() instead of printk()Jingoo Han1-2/+4
Use pr_info() instead of printk() to allow dynamic debugging. The pr_fmt prefix for pr_ macros is used. Also fix checkpatch warnings as below: WARNING: printk() should include KERN_ facility level [akpm@linux-foundation.org: use KBUILD_MODNAME, per Joe] Signed-off-by: Jingoo Han <jg1.han@samsung.com> Cc: Richard Purdie <rpurdie@rpsys.net> Cc: Joe Perches <joe@perches.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-05-29backlight: cr_bllcd: use pr_err()/pr_info() instead of printk()Jingoo Han1-4/+5
Use pr_err()/pr_info() instead of printk() to allow dynamic debugging. The pr_fmt prefix for pr_ macros is used. Also fix checkpatch warnings as below: WARNING: printk() should include KERN_ facility level WARNING: Prefer pr_err(... to printk(KERN_ERR, ... [akpm@linux-foundation.org: use KBUILD_MODNAME, per Joe] Signed-off-by: Jingoo Han <jg1.han@samsung.com> Cc: Richard Purdie <rpurdie@rpsys.net> Cc: Joe Perches <joe@perches.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-05-29backlight: apple_bl: use pr_debug()/pr_err() instead of printk()Jingoo Han1-12/+8
Use pr_debug()/pr_err() instead of printk() to allow dynamic debugging. The pr_fmt prefix for pr_ macros is used. Also fix checkpatch warnings as below: WARNING: Prefer pr_debug(... to printk(KERN_DEBUG, ... WARNING: Prefer pr_err(... to printk(KERN_ERR, ... [akpm@linux-foundation.org: use KBUILD_MODNAME, per Joe] Signed-off-by: Jingoo Han <jg1.han@samsung.com> Cc: Matthew Garrett <mjg@redhat.com> Cc: Richard Purdie <rpurdie@rpsys.net> Cc: Joe Perches <joe@perches.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-05-29backlight: use pr_warn() and pr_debug() instead of printk()Jingoo Han2-9/+12
Use pr_warn() and pr_debug() instead of printk to allow dynamic debugging. The pr_fmt prefix for pr_ macros is used. Also fix checkpatch warnings as below: WARNING: Prefer pr_warn(... to printk(KERN_WARNING, ... [akpm@linux-foundation.org: use KBUILD_MODNAME, per Joe] Signed-off-by: Jingoo Han <jg1.han@samsung.com> Cc: Richard Purdie <rpurdie@rpsys.net> Cc: Joe Perches <joe@perches.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-05-29drivers/video/backlight/adp5520_bl.c: use kstrtoul()Jingoo Han1-2/+2
The usage of strict_strtoul() is not preferred. Thus, kstrtoul should be used. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Cc: Michael Hennerich <michael.hennerich@analog.com> Cc: Richard Purdie <rpurdie@rpsys.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-05-29drivers/video/backlight/adp8870_bl.c: use kstrtoul()Jingoo Han1-3/+3
The usage of strict_strtoul() is not preferred. Thus, kstrtoul should be used. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Cc: Michael Hennerich <michael.hennerich@analog.com> Cc: Richard Purdie <rpurdie@rpsys.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-05-29drivers/video/backlight/adp8860_bl.c: use kstrtoul()Jingoo Han1-3/+3
The usage of strict_strtoul() is not preferred. Thus, kstrtoul should be used. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Cc: Michael Hennerich <michael.hennerich@analog.com> Cc: Richard Purdie <rpurdie@rpsys.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-05-29backlight: add LM3533 backlight driverJohan Hovold4-0/+484
Add sub-driver for the backlights on National Semiconductor / TI LM3533 lighting power chips. The chip provides 256 brightness levels and ambient-light-sensor and pwm input control. [akpm@linux-foundation.org: fix warning] [akpm@linux-foundation.org: fix the type of `mode'] Signed-off-by: Johan Hovold <jhovold@gmail.com> Cc: Richard Purdie <rpurdie@rpsys.net> Cc: Rob Landley <rob@landley.net> Cc: Samuel Ortiz <sameo@linux.intel.com> Cc: Jonathan Cameron <jic23@cam.ac.uk> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Florian Tobias Schandinat <FlorianSchandinat@gmx.de> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-05-29drivers/video/backlight/apple_bl.c: include header for exported symbol prototypesH Hartley Sweeten2-1/+2
Include the header to pickup the exported symbol prototype. Quiets the sparse warning: warning: symbol 'apple_bl_register' was not declared. Should it be static? warning: symbol 'apple_bl_unregister' was not declared. Should it be static? [akpm@linux-foundation.org: fix resulting build error] Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Cc: Richard Purdie <rpurdie@rpsys.net> Signed-off-by: Florian Tobias Schandinat <FlorianSchandinat@gmx.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-05-29lcd: add callbacks for early fb event blank supportInki Dae2-0/+20
This patchset adds early fb blank feature that a callback of lcd panel driver is called prior to specific fb driver's one. In the case of MIPI-DSI based video mode LCD Panel, for lcd power off, the power off commands should be transferred to lcd panel with display and mipi-dsi controller enabled because the commands is set to lcd panel at vsync porch period. and in opposite case, the callback of fb driver should be called prior to lcd panel driver's one because of same issue. Also if fb_blank mode is changed to FB_BLANK_POWERDOWN then display controller would be off(clock disable) but lcd panel would be still on. at this time, you could see some issue like sparkling on lcd panel because video clock to be delivered to ldi module of lcd panel was disabled. this issue could occurs for all lcd panels. The callback order is as the following: at fb_blank function of fbmem.c -> fb_notifier_call_chain(FB_EARLY_EVENT_BLANK) -> lcd panel driver's early_set_power() -> info->fbops->fb_blank() -> spcefic fb driver's fb_blank() -> fb_notifier_call_chain(FB_EVENT_BLANK) -> lcd panel driver's set_power() -> fb_notifier_call_chain(FB_R_EARLY_EVENT_BLANK) if info->fops->fb_blank() was failed. fb_notifier_call_chain(FB_R_EARLY_EVENT_BLANK) would be called to revert the effects of previous FB_EARLY_EVENT_BLANK call. and note that if early_set_power() of lcd_ops is NULL then early fb blank callback would be ignored. This patch: Add early_set_power and r_early_set_power callbacks. early_set_power callback is called prior to fb_blank() of fbmem.c and r_early_set_power callback is called if fb_blank() was failed to revert the effects of the early_set_power call of lcd panel driver. Signed-off-by: Inki Dae <inki.dae@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Cc: Lars-Peter Clausen <lars@metafoo.de> Cc: Florian Tobias Schandinat <FlorianSchandinat@gmx.de> Cc: Richard Purdie <rpurdie@rpsys.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-05-29fbdev: add events for early fb event supportInki Dae2-6/+19
Add FB_EARLY_EVENT_BLANK and FB_R_EARLY_EVENT_BLANK event mode supports. first, fb_notifier_call_chain() is called with FB_EARLY_EVENT_BLANK and fb_blank() of specific fb driver is called and then fb_notifier_call_chain() is called with FB_EVENT_BLANK again at fb_blank(). and if fb_blank() was failed then fb_nitifier_call_chain() would be called with FB_R_EARLY_EVENT_BLANK to revert the previous effects. Signed-off-by: Inki Dae <inki.dae@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Cc: Lars-Peter Clausen <lars@metafoo.de> Acked-by: Florian Tobias Schandinat <FlorianSchandinat@gmx.de> Cc: Richard Purdie <rpurdie@rpsys.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-05-29blacklight: remove redundant spi driver bus initializationLars-Peter Clausen4-4/+0
In ancient times it was necessary to manually initialize the bus field of an spi_driver to spi_bus_type. These days this is done in spi_driver_register() so we can drop the manual assignment. The patch was generated using the following coccinelle semantic patch: // <smpl> @@ identifier _driver; @@ struct spi_driver _driver = { .driver = { - .bus = &spi_bus_type, }, }; // </smpl> Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Cc: Richard Purdie <rpurdie@rpsys.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-05-29MAINTAINERS: remove AlessandroAlessandro Rubini1-6/+0
I'm definitely not up to date on the subject matter any more and haven't been able to comment on the messages on the topic. Signed-off-by: Alessandro Rubini <rubini@ipvvis.unipv.it> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-05-29hamradio/scc: orphan driver in MAINTAINERSUwe Kleine-König1-3/+1
The email address doesn't exist anymore and the website yields a 404. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-05-29memcg: decrement static keys at real destroy timeGlauber Costa3-9/+78
We call the destroy function when a cgroup starts to be removed, such as by a rmdir event. However, because of our reference counters, some objects are still inflight. Right now, we are decrementing the static_keys at destroy() time, meaning that if we get rid of the last static_key reference, some objects will still have charges, but the code to properly uncharge them won't be run. This becomes a problem specially if it is ever enabled again, because now new charges will be added to the staled charges making keeping it pretty much impossible. We just need to be careful with the static branch activation: since there is no particular preferred order of their activation, we need to make sure that we only start using it after all call sites are active. This is achieved by having a per-memcg flag that is only updated after static_key_slow_inc() returns. At this time, we are sure all sites are active. This is made per-memcg, not global, for a reason: it also has the effect of making socket accounting more consistent. The first memcg to be limited will trigger static_key() activation, therefore, accounting. But all the others will then be accounted no matter what. After this patch, only limited memcgs will have its sockets accounted. [akpm@linux-foundation.org: move enum sock_flag_bits into sock.h, document enum sock_flag_bits, convert memcg_proto_active() and memcg_proto_activated() to test_bit(), redo tcp_update_limit() comment to 80 cols] Signed-off-by: Glauber Costa <glommer@parallels.com> Cc: Tejun Heo <tj@kernel.org> Cc: Li Zefan <lizefan@huawei.com> Acked-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Michal Hocko <mhocko@suse.cz> Acked-by: David Miller <davem@davemloft.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-05-29memcg: always free struct memcg through schedule_work()Glauber Costa1-11/+13
Right now we free struct memcg with kfree right after a rcu grace period, but defer it if we need to use vfree() to get rid of that memory area. We do that by need, because we need vfree to be called in a process context. This patch unifies this behavior, by ensuring that even kfree will happen in a separate thread. The goal is to have a stable place to call the upcoming jump label destruction function outside the realm of the complicated and quite far-reaching cgroup lock (that can't be held when holding either the cpu_hotplug.lock or jump_label_mutex) [akpm@linux-foundation.org: tweak comment] Signed-off-by: Glauber Costa <glommer@parallels.com> Cc: Tejun Heo <tj@kernel.org> Cc: Li Zefan <lizefan@huawei.com> Acked-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Acked-by: Michal Hocko <mhocko@suse.cz> Cc: David Miller <davem@davemloft.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-05-29mm/memcg: apply add/del_page to lruvecHugh Dickins8-181/+122
Take lruvec further: pass it instead of zone to add_page_to_lru_list() and del_page_from_lru_list(); and pagevec_lru_move_fn() pass lruvec down to its target functions. This cleanup eliminates a swathe of cruft in memcontrol.c, including mem_cgroup_lru_add_list(), mem_cgroup_lru_del_list() and mem_cgroup_lru_move_lists() - which never actually touched the lists. In their place, mem_cgroup_page_lruvec() to decide the lruvec, previously a side-effect of add, and mem_cgroup_update_lru_size() to maintain the lru_size stats. Whilst these are simplifications in their own right, the goal is to bring the evaluation of lruvec next to the spin_locking of the lrus, in preparation for a future patch. Signed-off-by: Hugh Dickins <hughd@google.com> Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Acked-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Acked-by: Michal Hocko <mhocko@suse.cz> Acked-by: Konstantin Khlebnikov <khlebnikov@openvz.org> Cc: Johannes Weiner <hannes@cmpxchg.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-05-29mm: trivial cleanups in vmscan.cHugh Dickins1-21/+10
Utter trivia in mm/vmscan.c, mostly just reducing the linecount slightly; most exciting change being get_scan_count() calling vmscan_swappiness() once instead of twice. Signed-off-by: Hugh Dickins <hughd@google.com> Acked-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Acked-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Acked-by: Konstantin Khlebnikov <khlebnikov@openvz.org> Reviewed-by: Michal Hocko <mhocko@suse.cz> Cc: Johannes Weiner <hannes@cmpxchg.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-05-29mm/memcg: get_lru_size not get_lruvec_sizeHugh Dickins3-17/+16
Konstantin just introduced mem_cgroup_get_lruvec_size() and get_lruvec_size(), I'm about to add mem_cgroup_update_lru_size(): but we're dealing with the same thing, lru_size[lru]. We ought to agree on the naming, and I do think lru_size is the more correct: so rename his ones to get_lru_size(). Signed-off-by: Hugh Dickins <hughd@google.com> Acked-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Acked-by: Konstantin Khlebnikov <khlebnikov@openvz.org> Acked-by: Michal Hocko <mhocko@suse.cz> Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-05-29mm: memcg: print statistics from live countersJohannes Weiner1-102/+66
Directly print statistics and event counters instead of going through an intermediate accumulation stage into a separate array, which used to require defining statistic items in more than one place. [akpm@linux-foundation.org: checkpatch fixes] Signed-off-by: Johannes Weiner <hannes@cmpxchg.org> Acked-by: Michal Hocko <mhocko@suse.cz> Acked-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Ying Han <yinghan@google.com> Cc: Tejun Heo <tj@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-05-29mm: memcg: group swapped-out statistics counter logicallyJohannes Weiner1-2/+2
The counter of currently swapped out pages in a memcg (hierarchy) is sitting amidst ever-increasing event counters. Move this item to the other counters that reflect current state rather than history. This technically breaks the kernel ABI, but hopefully nobody relies on the order of items in memory.stat. Signed-off-by: Johannes Weiner <hannes@cmpxchg.org> Acked-by: Michal Hocko <mhocko@suse.cz> Acked-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Ying Han <yinghan@google.com> Cc: Tejun Heo <tj@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.