aboutsummaryrefslogtreecommitdiffstats
AgeCommit message (Collapse)AuthorFilesLines
2013-12-26mac8011: slight optimization of addr comparedingtianhong1-4/+3
Use the possibly more efficient ether_addr_equal to instead of memcmp. Cc: Johannes Berg <johannes@sipsolutions.net> Cc: John W. Linville <linville@tuxdriver.com> Cc: David Miller <davem@davemloft.net> Cc: linux-wireless@vger.kernel.org Cc: netdev@vger.kernel.org Signed-off-by: Wang Weidong <wangweidong1@huawei.com> Signed-off-by: Ding Tianhong <dingtianhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-12-26infiniband: slight optimization of addr comparedingtianhong1-2/+1
Use the possibly more efficient ether_addr_equal to instead of memcmp. Cc: Roland Dreier <roland@kernel.org> Cc: Sean Hefty <sean.hefty@intel.com> Cc: Hal Rosenstock <hal.rosenstock@gmail.com> Cc: Faisal Latif <faisal.latif@intel.com> Cc: linux-rdma@vger.kernel.org Cc: linux-kernel@vger.kernel.org Signed-off-by: Wang Weidong <wangweidong1@huawei.com> Signed-off-by: Ding Tianhong <dingtianhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-12-26ozwpan: slight optimization of addr comparedingtianhong2-3/+4
Use possibly more efficient ether_addr_equal instead of memcmp. Cc: Rupesh Gujare <rupesh.gujare@atmel.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: devel@driverdev.osuosl.org Cc: linux-kernel@vger.kernel.org Signed-off-by: Tan Xiaojun <tanxiaojun@huawei.com> Signed-off-by: Ding Tianhong <dingtianhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-12-26zd1211rw: slight optimization of addr comparedingtianhong1-3/+2
Use possibly more efficient ether_addr_equal instead of memcmp. Cc: Daniel Drake <dsd@gentoo.org> Cc: Ulrich Kunitz <kune@deine-taler.de> Cc: "John W. Linville" <linville@tuxdriver.com> Cc: linux-wireless@vger.kernel.org Cc: netdev@vger.kernel.org Cc: linux-kernel@vger.kernel.org Signed-off-by: Tan Xiaojun <tanxiaojun@huawei.com> Signed-off-by: Ding Tianhong <dingtianhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-12-26batman-adv: use batadv_compare_eth for concisedingtianhong2-2/+2
It is better to use batadv_compate_eth instead of memcpy for concise style. Cc: Marek Lindner <mareklindner@neomailbox.ch> Cc: Simon Wunderlich <sw@simonwunderlich.de> Cc: Antonio Quartulli <antonio@meshcoding.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: b.a.t.m.a.n@lists.open-mesh.org Cc: netdev@vger.kernel.org Cc: linux-kernel@vger.kernel.org Signed-off-by: Tan Xiaojun <tanxiaojun@huawei.com> Signed-off-by: Ding Tianhong <dingtianhong@huawei.com> Acked-by: Antonio Quartulli <antonio@meshcoding.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-12-26ppp: slight optimization of addr comparedingtianhong1-2/+2
Use possibly more efficient ether_addr_equal to instead of memcmp. Cc: Michal Ostrowski <mostrows@earthlink.net> Cc: netdev@vger.kernel.org Cc: linux-kernel@vger.kernel.org Signed-off-by: Ding Tianhong <dingtianhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-12-26hamradio: slight optimization of addr comparedingtianhong1-1/+1
Use possibly more efficient ether_addr_equal to instead of memcmp. Cc: Joerg Reuter <jreuter@yaina.de> Cc: linux-hams@vger.kernel.org Cc: netdev@vger.kernel.org Cc: linux-kernel@vger.kernel.org Signed-off-by: Ding Tianhong <dingtianhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-12-26net: atl1: slight optimization of addr comparedingtianhong1-1/+2
Use the recently added and possibly more efficient ether_addr_equal_unaligned to instead of memcmp. Cc: Jay Cliburn <jcliburn@gmail.com> Cc: Chris Snook <chris.snook@gmail.com> Cc: netdev@vger.kernel.org Cc: linux-kernel@vger.kernel.org Signed-off-by: Weilong Chen <chenweilong@huawei.com> Signed-off-by: Ding Tianhong <dingtianhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-12-26net: pcnet: slight optimization of addr comparedingtianhong1-1/+1
Use possibly more efficient ether_addr_equal to instead of memcmp. Cc: Don Fry <pcnet32@frontier.com> Cc: netdev@vger.kernel.org Cc: linux-kernel@vger.kernel.org Signed-off-by: Ding Tianhong <dingtianhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-12-26net: freescale: remove unused compare_addr()dingtianhong1-5/+0
The function did not be used any more, so remove it. Cc: Li Yang <leoli@freescale.com> Cc: netdev@vger.kernel.org Cc: linuxppc-dev@lists.ozlabs.org Cc: linux-kernel@vger.kernel.org Signed-off-by: Ding Tianhong <dingtianhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-12-26qlge: make local function staticstephen hemminger2-3/+2
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-12-26mdio: unused ethtool functionsstephen hemminger2-31/+0
Use it or lose it. Signed-off-by: Stephen Hemminger <stephen@networkplumber.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-12-26hhf: make qdisc ops staticstephen hemminger1-2/+1
This module shouldn't be randomly exporting symbols Signed-off-by: Stephen Hemminger <stephen@networkplumber.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-12-22rose: cleanup checkpatch errors,spaces requiredWeilong Chen2-2/+2
This patch add spaces to cleanup checkpatch errors. Signed-off-by: Weilong Chen <chenweilong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-12-22sctp: remove the never used 'return' and redundant 'break'wangweidong1-11/+2
In switch() had do return, and never use the 'return NULL'. The 'break' after return or goto has no effect. Remove it. v2: make it more readable as suggested by Neil. Signed-off-by: Wang Weidong <wangweidong1@huawei.com> Acked-by: Neil Horman <nhorman@tuxdriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-12-22mac802154: fix following checkpath.pl warning Prefer pr_warn(... to pr_warning(...Weilong Chen1-2/+2
This patch fixes checkpath.pl: WARNING: Prefer pr_warn(... to pr_warning(... #447: FILE: ./wpan.c:447: Signed-off-by: Weilong Chen <chenweilong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-12-22cxgb4: make functions static and remove dead codestephen hemminger4-143/+8
Cleanup by making local functions static. The code to load config file is unreachable in net-next, probably came from some out of tree driver. Signed-off-by: Stephen Hemminger <stephen@networkplumber.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-12-22sctp: remove casting from function calls through ops structurewangweidong2-3/+3
remove the unnecessary cast. Signed-off-by: Wang Weidong <wangweidong1@huawei.com> Acked-by: Neil Horman <nhorman@tuxdriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-12-22netconf: add support for IPv6 proxy_ndpstephen hemminger1-1/+48
Need to be able to see changes to proxy NDP status on a per interface basis via netlink (analog to proxy_arp). Signed-off-by: Stephen Hemminger <stephen@networkplumber.org> Acked-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-12-22netconf: rename PROXY_ARP to NEIGH_PROXYstephen hemminger2-6/+6
Use same field for both IPv4 (proxy_arp) and IPv6 (proxy_ndp) so fix it before API is set to be a common name Signed-off-by: Stephen Hemminger <stephen@networkplumber.org> Acked-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-12-22net: vxlan: use custom ndo_change_mtu handlerDaniel Borkmann1-1/+24
When adding a new vxlan device to an "underlying carrier" (here: dst->remote_ifindex), the MTU size assigned to the vxlan device is the MTU at setup time of the carrier - needed headroom, when adding a vxlan device w/o explicit carrier, then it defaults to 1500. In case of an explicit carrier that supports jumbo frames, we currently cannot change vxlan MTU via ip(8) to > 1500 in post-setup time, as vxlan driver uses eth_change_mtu() as default method for manually setting MTU. Hence, use a custom implementation that only falls back to eth_change_mtu() in case we didn't use a dev parameter on device setup time, and otherwise allow a max MTU setting of the carrier incl. adjustment for headroom. Reported-by: Shahed Shaikh <shahed.shaikh@qlogic.com> Signed-off-by: Daniel Borkmann <dborkman@redhat.com> Acked-by: Stephen Hemminger <stephen@networkplumber.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-12-21net: use kfree_skb_list() helperEric Dumazet2-19/+4
We can use kfree_skb_list() instead of open coding it. Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-12-21Merge branch 'for-davem' of git://gitorious.org/linux-can/linux-can-nextDavid S. Miller4-30/+102
Marc Kleine-Budde says: ==================== this is a pull request of three patches for net-next/master. There is a patch by Oliver Hartkopp, to clean up the CAN gw code. Alexander Shiyan adds device tree support to the mcp251x driver and a patch by Ezequiel Garcia lets the ti_hecc driver compile on all ARM platforms. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2013-12-21ipv6: move ip6_sk_accept_pmtu from generic pmtu update path to ipv6 oneHannes Frederic Sowa2-4/+2
In commit 93b36cf3425b9b ("ipv6: support IPV6_PMTU_INTERFACE on sockets") I made a horrible mistake to add ip6_sk_accept_pmtu to the generic sctp_icmp_frag_needed path. This results in build warnings if IPv6 is disabled which were luckily caught by Fengguang's kbuild bot. But it also leads to a kernel panic IPv4 frag-needed packet is received. Reported-by: kbuild test robot <fengguang.wu@intel.com> Signed-off-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Acked-by: Daniel Borkmann <dborkman@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-12-21Revert "sctp: fix missing include file"David S. Miller1-1/+0
This reverts commit ac0917f250c61ae1e395844ebd924db0e07d1f87. Better version of this fix forthcoming. Signed-off-by: David S. Miller <davem@davemloft.net>
2013-12-22can: ti_hecc: Replace platform dependency with ARM dependencyEzequiel Garcia1-1/+1
OMAP's ti_hecc driver is used to support the CAN controller on many omap2plus SoCs (OMAP2430, OMAP3, OMAP4, OMAP5 and AM335x), so it's wrong to make this depend on OMAP3 only. Take an extra step, to get wider build coverage, and make the driver depend on ARM. Signed-off-by: Ezequiel Garcia <ezequiel.garcia@free-electrons.com> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2013-12-21can: mcp251x: Add device tree supportAlexander Shiyan2-25/+99
This patch adds Device Tree support to the Microchip MCP251X driver. Signed-off-by: Alexander Shiyan <shc_work@mail.ru> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2013-12-21can: gw: remove obsolete checksOliver Hartkopp1-4/+2
In commit be286bafe1f4069094865264f29805854c5788bf ("can: gw: add a variable limit for CAN frame routings") the detection of the frame routing has been changed. The former solution required dev->header_ops to be unused (== NULL). I missed to remove the obsolete checks in the original commit - so here it is. Signed-off-by: Oliver Hartkopp <socketcan@hartkopp.net> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2013-12-21packet: doc: add documentation for VLAN TPID deliveryAtzm Watanabe1-2/+7
Introduce TP_STATUS_VLAN_TPID_VALID bit into the documentation. Signed-off-by: Atzm Watanabe <atzm@stratosphere.co.jp> Acked-by: Daniel Borkmann <dborkman@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-12-21sctp: fix missing include filesfeldma@cumulusnetworks.com1-0/+1
Compile error reported by Jim Davis on netdev. ip6_sk_accept_pmtu() needs net/ip6_route.h Signed-off-by: Scott Feldman <sfeldma@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-12-20Merge branch 'b44'David S. Miller4-26/+250
Hauke Mehrtens says: ==================== b44: add support for external PHY This adds support for an external phy connected to the mac controlled by b44. This is used on home routers of the BCM47xx line where this MAC core was used and is contended to an external switch core through MII. These patches are in OpenWrt for some time and are tested by different users with different devices. The publicly available Programmer's Reference Guide for some of these chips help making this patch it would be nice to have such a documentation for more Broadcom Chips like some SoCs. https://www.broadcom.com/collateral/pg/440X-PG02-R.pdf ==================== Signed-off-by: David S. Miller <davem@davemloft.net> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
2013-12-20b44: use fixed PHY device if we do not find anyHauke Mehrtens3-1/+28
The ADM6996L switch and some Broadcom switches with two MII interfaces like the BCM5325F connected to two MACs on the SoC, used on some routers do not return a valid value when reading the PHY id register and Linux thinks there is no PHY at all, but that is wrong. This patch registers a fixed phy in the arch code and then searches it when there is no other phy in the Ethernet driver code. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-12-20b44: do not set PHY address to 30 for every ext PHYHauke Mehrtens1-2/+5
b44_phy_reset() will fail for an external PHY and only work with the internal PHY, this was an old workaround when the detection of an external switch based on the PHY address failed and it is not needed any more. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-12-20b44: activate PHY when MAC is offHauke Mehrtens1-1/+4
Without this patch we can not access the PHY when the MAC is switched off. This PHY access is needed to configure the switch, which is done through PHY registers. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-12-20b44: add phylib supportHauke Mehrtens3-5/+189
Most of the older home routers based on the Broadcom BCM47XX SoC series are using a MAC that is supported by b44. On most of these routers not the internal PHY of this MAC core is used, but a switch sometimes on an external chip or integrated into the same SoC as the Ethernet core. For this switch a special PHY driver is needed which should not be integrated into b44 as the same switches are also used by other Broadcom home networking SoCs which are using different Ethernet MAC drivers. This was tested with the b53 switch driver which is currently on its way to mainline. If the internal PHY is not used, b44 will now search on the MDIO bus for a phy and use the Linux phylib subsystem to register a driver. Support for the internal PHY must stay here, because there are some device which are suing the internal phy. With this patch we scan the mdio bus when the sprom or nvram says that the PHY address is 30, if a PHY was found at this address b44 uses it. This was tested with a BCM4704, BCM4712 and BCM5354. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-12-20b44: rename b44_mii_{read, write} to b44_mdio_{read, write}_miiHauke Mehrtens1-5/+5
The next patch will add these functions for phylib, and we should rename the old ones before. This now indicates that these functions are used for the mdio registers and on the mii interface. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-12-20b44: abort when no PHY is available at allHauke Mehrtens2-0/+7
When the phy address is 31, this means that there is no PHY connected to this MAC at all, no internal and no external PHY. Reading these PHY registers causes a system reset on some routers. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-12-20b44: rename B44_PHY_ADDR_NO_PHY to B44_PHY_ADDR_NO_LOCAL_PHYHauke Mehrtens2-4/+4
The PHY address 30 means there is no local PHY, but there could be an external PHY like a switch connected via MII. This is the case on most embedded home routers where this driver is used. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-12-20b44: check register instead of PHY address to detect external PHYHauke Mehrtens2-10/+10
The Ethernet core supported by b44 supports an internal PHY integrated into the mac core, which is supported by the b44 driver and an external PHY to which the mac core is connected. This external PHY could be a switch connected through MII, which is often the case when this core is used on home routers. The usage of an external PHY was assumed when the PHY address 30 was used and an internal PHY was assumed when the PHY address was different. To verify that b44_phy_reset() was called and checked if it worked, otherwise PHY address 30 was assumed, an external PHY. It is better to check the register which says which PHY is connected to the MAC instead of checking the PHY address. The interface to an external PHY was only activated when this register was set. This also changes B44_FLAG_INTERNAL_PHY to B44_FLAG_EXTERNAL_PHY, it is easier to check. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-12-20tcp: autocork should not hold first packet in write queueEric Dumazet1-4/+10
Willem noticed a TCP_RR regression caused by TCP autocorking on a Mellanox test bed. MLX4_EN_TX_COAL_TIME is 16 us, which can be right above RTT between hosts. We can receive a ACK for a packet still in NIC TX ring buffer or in a softnet completion queue. Fix this by always pushing the skb if it is at the head of write queue. Also, as TX completion is lockless, it's safer to perform sk_wmem_alloc test after setting TSQ_THROTTLED. erd:~# MIB="MIN_LATENCY,MEAN_LATENCY,MAX_LATENCY,P99_LATENCY,STDDEV_LATENCY" erd:~# ./netperf -H remote -t TCP_RR -- -o $MIB | tail -n 1 (repeat 3 times) Before patch : 18,1049.87,41004,39631,6295.47 17,239.52,40804,48,2912.79 18,348.40,40877,54,3573.39 After patch : 18,22.84,4606,38,16.39 17,21.56,2871,36,13.51 17,22.46,2705,37,11.83 Reported-by: Willem de Bruijn <willemb@google.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Fixes: f54b311142a9 ("tcp: auto corking") Signed-off-by: David S. Miller <davem@davemloft.net>
2013-12-20net_sched: fix regression in tc_action_opsEric Dumazet1-40/+13
list_for_each_entry(a, &act_base, head) doesn't exit with a = NULL if we reached the end of the list. tcf_unregister_action(), tc_lookup_action_n() and tc_lookup_action() need fixes. Remove tc_lookup_action_id() as its unused and not worth 'fixing' Signed-off-by: Eric Dumazet <edumazet@google.com> Fixes: 1f747c26c48b ("net_sched: convert tc_action_ops to use struct list_head") Cc: Cong Wang <xiyou.wangcong@gmail.com> Reviewed-by: Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-12-20net_sched: fix a regression in tcf_proto_lookup_ops()Eric Dumazet1-12/+10
list_for_each_entry(t, &tcf_proto_base, head) doesn't exit with t = NULL if we reached the end of the list. Signed-off-by: Eric Dumazet <edumazet@google.com> Fixes: 3627287463b4 ("net_sched: convert tcf_proto_ops to use struct list_head") Cc: Cong Wang <xiyou.wangcong@gmail.com> Reviewed-by: Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-12-20net_sched: fix a regression in tc actionsWANG Cong9-11/+11
This patch fixes: 1) pass mask rather than size to tcf_hashinfo_init() 2) the cleanup should be in reversed order in mirred_cleanup_module() Reported-by: Eric Dumazet <eric.dumazet@gmail.com> Fixes: 369ba56787d7469c0afd ("net_sched: init struct tcf_hashinfo at register time") Cc: Eric Dumazet <eric.dumazet@gmail.com> Cc: David S. Miller <davem@davemloft.net> Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by: Jamal Hadi Salim <jhs@mojatatu.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-12-19Merge branch 'bridge_cleanups'David S. Miller14-47/+36
Tan Xiaojun says: ==================== bridge: cleanup and fix checkpatch errors Clean up and fix some checkpatch errors in bridge driver. ==================== Signed-off-by: David S. Miller <davem@davemloft.net> Acked-by: Stephen Hemminger <stephen@networkplumber.org>
2013-12-19bridge: change the position of '{' to the pre linetanxiaojun4-18/+9
That open brace { should be on the previous line. Signed-off-by: Tan Xiaojun <tanxiaojun@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-12-19bridge: change "foo* bar" to "foo *bar"tanxiaojun2-10/+10
"foo * bar" should be "foo *bar". Signed-off-by: Tan Xiaojun <tanxiaojun@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-12-19bridge: add space before '(/{', after ',', etc.tanxiaojun7-12/+12
Spaces required before the open parenthesis '(', before the open brace '{', after that ',' and around that '?/:'. Signed-off-by: Tan Xiaojun <tanxiaojun@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-12-19bridge: remove unnecessary parenthesestanxiaojun2-3/+3
Return is not a function, parentheses are not required. Signed-off-by: Tan Xiaojun <tanxiaojun@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-12-19bridge: remove unnecessary condition judgmenttanxiaojun2-4/+2
Because err is always negative, remove unnecessary condition judgment. Signed-off-by: Tan Xiaojun <tanxiaojun@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-12-19bnx2x: cleanup skb_set_hashTom Herbert2-13/+12
Save pkt_hash_types in tpa structure. Signed-off-by: Tom Herbert <therbert@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.