aboutsummaryrefslogtreecommitdiffstats
AgeCommit message (Collapse)AuthorFilesLines
2017-04-19acpi/arm64: Add GTDT table parse driverFu Wei5-0/+168
This patch adds support for parsing arch timer info in GTDT, provides some kernel APIs to parse all the PPIs and always-on info in GTDT and export them. By this driver, we can simplify arm_arch_timer drivers, and separate the ACPI GTDT knowledge from it. Signed-off-by: Fu Wei <fu.wei@linaro.org> Signed-off-by: Hanjun Guo <hanjun.guo@linaro.org> Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Tested-by: Xiongfeng Wang <wangxiongfeng2@huawei.com> Reviewed-by: Hanjun Guo <hanjun.guo@linaro.org> Tested-by: Hanjun Guo <hanjun.guo@linaro.org> Acked-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Signed-off-by: Mark Rutland <mark.rutland@arm.com>
2017-04-19clocksource: arm_arch_timer: split MMIO timer probing.Fu Wei1-44/+145
Currently the code to probe MMIO architected timers mixes DT parsing with actual poking of hardware. This makes the code harder than necessary to understand, and makes it difficult to add support for probing via ACPI. This patch splits the DT parsing from HW probing. The DT parsing now lives in arch_timer_mem_of_init(), which fills in an arch_timer_mem structure that it hands to probing functions that can be reused for ACPI support. Since the rate detection logic will be slight different when using ACPI, the probing is performed as a number of steps. This results in more code for the moment, and some arguably redundant work, but simplifies matters considerably when ACPI support is added. Signed-off-by: Fu Wei <fu.wei@linaro.org> [Mark: refactor the probing split] Signed-off-by: Mark Rutland <mark.rutland@arm.com>
2017-04-19clocksource: arm_arch_timer: add structs to describe MMIO timerFu Wei1-0/+16
In preparation for ACPI GTDT support, this patch adds structs to describe the MMIO timers indepedent of the firmware interface. Subsequent patches will use these to split the FW/HW probing logic, so that the HW probing logic can be shared by ACPI and DT. Signed-off-by: Fu Wei <fu.wei@linaro.org> Reviewed-by: Hanjun Guo <hanjun.guo@linaro.org> Signed-off-by: Mark Rutland <mark.rutland@arm.com>
2017-04-19clocksource: arm_arch_timer: move arch_timer_needs_of_probing into DT init callFu Wei1-25/+21
To cleanly split code paths specific to ACPI or DT at a higher level, this patch removes arch_timer_init(), folding the relevant parts of its logic into existing callers. This pathes the way for further rework, and saves a few lines. Signed-off-by: Fu Wei <fu.wei@linaro.org> Reviewed-by: Hanjun Guo <hanjun.guo@linaro.org> [Mark: reword commit message] Signed-off-by: Mark Rutland <mark.rutland@arm.com>
2017-04-19clocksource: arm_arch_timer: refactor arch_timer_needs_probingFu Wei1-15/+19
When booting with DT, it's possible for timer nodes to be probed in any order. Some common initialisation needs to occur after all nodes have been probed, and arch_timer_common_init() has code to detect when this has happened. This logic is DT-specific, and it would be best to factor it out of the common code that will be shared with ACPI. This patch folds this into the existing arch_timer_needs_probing(), which is renamed to arch_timer_needs_of_probing(), and no longer takes any arguments. This is only called when using DT, and not when using ACPI, which will have a deterministic probe order. Signed-off-by: Fu Wei <fu.wei@linaro.org> Reviewed-by: Hanjun Guo <hanjun.guo@linaro.org> [Mark: reword commit message] Signed-off-by: Mark Rutland <mark.rutland@arm.com>
2017-04-19clocksource: arm_arch_timer: split dt-only rate handlingFu Wei1-18/+23
For historical reasons, rate detection when probing via DT is somewhat convoluted. We tried to package this up in arch_timer_detect_rate(), but with the addition of ACPI worse, and gets in the way of stringent rate checking when ACPI is used. This patch makes arch_timer_detect_rate() specific to DT, ripping out ACPI logic. In preparation for rework of the MMIO timer probing, the reading of the relevant CNTFRQ register is factored out to callers. The function is then renamed to arch_timer_of_configure_rate(), which better represents its new place in the world. Comments are added in the DT and ACPI probe paths to explain this. Signed-off-by: Fu Wei <fu.wei@linaro.org> [Mark: reword commit message] Signed-off-by: Mark Rutland <mark.rutland@arm.com>
2017-04-10clocksource: arm_arch_timer: rework PPI selectionFu Wei1-31/+46
Currently, the arch timer driver uses ARCH_TIMER_PHYS_SECURE_PPI to mean the driver will use the secure PPI *and* potentially also use the non-secure PPI. This is somewhat confusing. For arm64 it never makes sense to use the secure PPI, but we do anyway, inheriting this behaviour from 32-bit arm. For ACPI, we may not even have a valid secure PPI, so we need to be able to only request the non-secure PPI. To that end, this patch reworks the timer driver so that we can request the non-secure PPI alone. The PPI selection is split out into a new function, arch_timer_select_ppi(), and verification of the selected PPI is shifted out to callers (as DT may select the PPI by other means and must handle this anyway). We now consistently use arch_timer_has_nonsecure_ppi() to determine whether we must manage a non-secure PPI *in addition* to a secure PPI. When we only have a non-secure PPI, this returns false. Signed-off-by: Fu Wei <fu.wei@linaro.org> Tested-by: Xiongfeng Wang <wangxiongfeng2@huawei.com> [Mark: reword commit message] Signed-off-by: Mark Rutland <mark.rutland@arm.com>
2017-04-10clocksource: arm_arch_timer: add a new enum for spi typeFu Wei2-2/+8
This patch add a new enum "arch_timer_spi_nr" and use it in the driver. Just for code's readability, no functional change. Signed-off-by: Fu Wei <fu.wei@linaro.org> Acked-by: Mark Rutland <mark.rutland@arm.com> Signed-off-by: Mark Rutland <mark.rutland@arm.com>
2017-04-10clocksource: arm_arch_timer: move enums and defines to header fileFu Wei2-11/+12
To support the arm_arch_timer via ACPI we need to share defines and enums between the driver and the ACPI parser code. So we split out the relevant defines and enums into arm_arch_timer.h. No functional change. Signed-off-by: Fu Wei <fu.wei@linaro.org> Acked-by: Mark Rutland <mark.rutland@arm.com> Tested-by: Xiongfeng Wang <wangxiongfeng2@huawei.com> Signed-off-by: Mark Rutland <mark.rutland@arm.com>
2017-04-10clocksource: arm_arch_timer: rename the PPI enumFu Wei1-40/+42
In preparation for moving the PPI enum out into a header, rename the enum and its constituent values these so they are namespaced w.r.t. the arch timer. This will aid consistency and avoid potential name clashes when this move occurs. No functional change. Signed-off-by: Fu Wei <fu.wei@linaro.org> Tested-by: Xiongfeng Wang <wangxiongfeng2@huawei.com> [Mark: reword commit message] Signed-off-by: Mark Rutland <mark.rutland@arm.com>
2017-04-10clocksource: arm_arch_timer: rename type macrosFu Wei1-20/+23
In preparation for moving the type macros out into a header, rename these so they are namespaced w.r.t. the arch timer. We'll apply the same prefix to other definitions in subsequent patches. This will aid consistency and avoid potential name clahses when this move occurs. No functional change. Signed-off-by: Fu Wei <fu.wei@linaro.org> Tested-by: Xiongfeng Wang <wangxiongfeng2@huawei.com> [Mark: reword commit message] Signed-off-by: Mark Rutland <mark.rutland@arm.com>
2017-04-10clocksource: arm_arch_timer: clean up printk usageFu Wei1-24/+25
Almost all string in the arm_arch_timer driver duplicate an common prefix (though a few do not). For consistency, it would be better to use pr_fmt(), and always use this prefix. At the same time, we may as well clean up some whitespace issues in arch_timer_banner and arch_timer_init. No functional change. Signed-off-by: Fu Wei <fu.wei@linaro.org> Acked-by: Mark Rutland <mark.rutland@arm.com> Tested-by: Xiongfeng Wang <wangxiongfeng2@huawei.com> [Mark: reword commit message] Signed-off-by: Mark Rutland <mark.rutland@arm.com>
2017-04-07arm64: arch_timer: Add HISILICON_ERRATUM_161010101 ACPI matching dataMarc Zyngier1-0/+33
In order to deal with ACPI enabled platforms suffering from the HISILICON_ERRATUM_161010101, let's add the required OEM data that allow the workaround to be enabled. Acked-by: Thomas Gleixner <tglx@linutronix.de> Tested-by: dann frazier <dann.frazier@canonical.com> Tested-by: Hanjun Guo <hanjun.guo@linaro.org> Reviewed-by: Hanjun Guo <hanjun.guo@linaro.org> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2017-04-07arm64: arch_timer: Allow erratum matching with ACPI OEM informationMarc Zyngier2-0/+35
Just as we're able to identify a broken platform using some DT information, let's enable a way to spot the offenders with ACPI. The difference is that we can only match on some OEM info instead of implementation-specific properties. So in order to avoid the insane multiplication of errata structures, we allow an array of OEM descriptions to be attached to an erratum structure. Acked-by: Thomas Gleixner <tglx@linutronix.de> Tested-by: dann frazier <dann.frazier@canonical.com> Tested-by: Hanjun Guo <hanjun.guo@linaro.org> Reviewed-by: Hanjun Guo <hanjun.guo@linaro.org> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2017-04-07arm64: arch_timer: Workaround for Cortex-A73 erratum 858921Marc Zyngier2-0/+30
Cortex-A73 (all versions) counter read can return a wrong value when the counter crosses a 32bit boundary. The workaround involves performing the read twice, and to return one or the other depending on whether a transition has taken place. Acked-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2017-04-07arm64: arch_timer: Enable CNTVCT_EL0 trap if workaround is enabledMarc Zyngier1-13/+32
Userspace being allowed to use read CNTVCT_EL0 anytime (and not only in the VDSO), we need to enable trapping whenever a cntvct workaround is enabled on a given CPU. Acked-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2017-04-07arm64: arch_timer: Save cntkctl_el1 as a per-cpu variableMarc Zyngier1-3/+3
As we're about to allow per CPU cntkctl_el1 configuration, we cannot rely on the register value to be common when performing power management. Let's turn saved_cntkctl into a per-cpu variable. Acked-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2017-04-07arm64: arch_timer: Move clocksource_counter and co aroundMarc Zyngier1-31/+31
In order to access clocksource_counter from the errata handling code, move it (together with the related structures and functions) towards the top of the file. Acked-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2017-04-07arm64: arch_timer: Allows a CPU-specific erratum to only affect a subset of CPUsMarc Zyngier2-23/+50
Instead of applying a CPU-specific workaround to all CPUs in the system, allow it to only affect a subset of them (typical big-little case). This is done by turning the erratum pointer into a per-CPU variable. Acked-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2017-04-07arm64: arch_timer: Make workaround methods optionalMarc Zyngier1-2/+3
Not all errata need to workaround all access types. Allow them to be optional. Acked-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2017-04-07arm64: arch_timer: Rework the set_next_event workaroundsMarc Zyngier2-5/+30
The way we work around errata affecting set_next_event is not very nice, at it imposes this workaround on errata that do not need it. Add new workaround hooks and let the existing workarounds use them. Acked-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2017-04-07arm64: arch_timer: Get rid of erratum_workaround_set_sneMarc Zyngier1-49/+41
Let's move the handling of workarounds affecting set_next_event to the affected function, instead of overriding the pointers as an afterthough. Yes, this is an extra indirection on the erratum handling path, but the HW is busted anyway. This will allow for some more flexibility later. Acked-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2017-04-07arm64: arch_timer: Move arch_timer_reg_read/write aroundMarc Zyngier1-62/+62
As we're about to move things around, let's start with the low level read/write functions. This allows us to use these functions in the errata handling code without having to use forward declaration of static functions. Acked-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Mark Rutland <mark.rutland@arm.com> Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2017-04-07arm64: arch_timer: Add erratum handler for CPU-specific capabilityMarc Zyngier2-4/+25
Should we ever have a workaround for an erratum that is detected using a capability and affecting a particular CPU, it'd be nice to have a way to probe them directly. Acked-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2017-04-07arm64: arch_timer: Add infrastructure for multiple erratum detection methodsMarc Zyngier2-12/+78
We're currently stuck with DT when it comes to handling errata, which is pretty restrictive. In order to make things more flexible, let's introduce an infrastructure that could support alternative discovery methods. No change in functionality. Acked-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Hanjun Guo <hanjun.guo@linaro.org> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2017-04-07arm64: cpu_errata: Add capability to advertise Cortex-A73 erratum 858921Marc Zyngier3-1/+11
In order to work around Cortex-A73 erratum 858921 in a subsequent patch, add the required capability that advertise the erratum. As the configuration option it depends on is not present yet, this has no immediate effect. Acked-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2017-04-07arm64: cpu_errata: Allow an erratum to be match for all revisions of a coreMarc Zyngier1-0/+7
Some minor erratum may not be fixed in further revisions of a core, leading to a situation where the workaround needs to be updated each time an updated core is released. Introduce a MIDR_ALL_VERSIONS match helper that will work for all versions of that MIDR, once and for all. Acked-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Mark Rutland <mark.rutland@arm.com> Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org> Reviewed-by: Suzuki K Poulose <suzuki.poulose@arm.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2017-04-07arm64: Define Cortex-A73 MIDRMarc Zyngier1-0/+2
As we're about to introduce a new workaround that is specific to Cortex-A73, let's define the coresponding MIDR. Acked-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Mark Rutland <mark.rutland@arm.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2017-04-07arm64: Add CNTVCT_EL0 trap handlerMarc Zyngier2-0/+16
Since people seem to make a point in breaking the userspace visible counter, we have no choice but to trap the access. Add the required handler. Acked-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Mark Rutland <mark.rutland@arm.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2017-04-07arm64: Allow checking of a CPU-local erratumMarc Zyngier1-2/+11
this_cpu_has_cap() only checks the feature array, and not the errata one. In order to be able to check for a CPU-local erratum, allow it to inspect the latter as well. This is consistent with cpus_have_cap()'s behaviour, which includes errata already. Acked-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org> Reviewed-by: Suzuki K Poulose <suzuki.poulose@arm.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2017-03-19Linux 4.11-rc3Linus Torvalds1-1/+1
2017-03-19mm/swap: don't BUG_ON() due to uninitialized swap slot cacheLinus Torvalds1-1/+1
This BUG_ON() triggered for me once at shutdown, and I don't see a reason for the check. The code correctly checks whether the swap slot cache is usable or not, so an uninitialized swap slot cache is not actually problematic afaik. I've temporarily just switched the BUG_ON() to a WARN_ON_ONCE(), since I'm not sure why that seemingly pointless check was there. I suspect the real fix is to just remove it entirely, but for now we'll warn about it but not bring the machine down. Cc: "Huang, Ying" <ying.huang@intel.com> Cc: Tim Chen <tim.c.chen@linux.intel.com> Cc: Michal Hocko <mhocko@suse.com> Cc: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-03-19Merge tag 'powerpc-4.11-5' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linuxLinus Torvalds4-2/+6
Pull more powerpc fixes from Michael Ellerman: "A couple of minor powerpc fixes for 4.11: - wire up statx() syscall - don't print a warning on memory hotplug when HPT resizing isn't available Thanks to: David Gibson, Chandan Rajendra" * tag 'powerpc-4.11-5' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: powerpc/pseries: Don't give a warning when HPT resizing isn't available powerpc: Wire up statx() syscall
2017-03-19Merge branch 'parisc-4.11-2' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linuxLinus Torvalds8-68/+88
Pull parisc fixes from Helge Deller: - Mikulas Patocka added support for R_PARISC_SECREL32 relocations in modules with CONFIG_MODVERSIONS. - Dave Anglin optimized the cache flushing for vmap ranges. - Arvind Yadav provided a fix for a potential NULL pointer dereference in the parisc perf code (and some code cleanups). - I wired up the new statx system call, fixed some compiler warnings with the access_ok() macro and fixed shutdown code to really halt a system at shutdown instead of crashing & rebooting. * 'parisc-4.11-2' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux: parisc: Fix system shutdown halt parisc: perf: Fix potential NULL pointer dereference parisc: Avoid compiler warnings with access_ok() parisc: Wire up statx system call parisc: Optimize flush_kernel_vmap_range and invalidate_kernel_vmap_range parisc: support R_PARISC_SECREL32 relocation in modules
2017-03-19Merge git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pendingLinus Torvalds25-548/+1274
Pull SCSI target fixes from Nicholas Bellinger: "The bulk of the changes are in qla2xxx target driver code to address various issues found during Cavium/QLogic's internal testing (stable CC's included), along with a few other stability and smaller miscellaneous improvements. There are also a couple of different patch sets from Mike Christie, which have been a result of his work to use target-core ALUA logic together with tcm-user backend driver. Finally, a patch to address some long standing issues with pass-through SCSI export of TYPE_TAPE + TYPE_MEDIUM_CHANGER devices, which will make folks using physical (or virtual) magnetic tape happy" * git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending: (28 commits) qla2xxx: Update driver version to 9.00.00.00-k qla2xxx: Fix delayed response to command for loop mode/direct connect. qla2xxx: Change scsi host lookup method. qla2xxx: Add DebugFS node to display Port Database qla2xxx: Use IOCB interface to submit non-critical MBX. qla2xxx: Add async new target notification qla2xxx: Export DIF stats via debugfs qla2xxx: Improve T10-DIF/PI handling in driver. qla2xxx: Allow relogin to proceed if remote login did not finish qla2xxx: Fix sess_lock & hardware_lock lock order problem. qla2xxx: Fix inadequate lock protection for ABTS. qla2xxx: Fix request queue corruption. qla2xxx: Fix memory leak for abts processing qla2xxx: Allow vref count to timeout on vport delete. tcmu: Convert cmd_time_out into backend device attribute tcmu: make cmd timeout configurable tcmu: add helper to check if dev was configured target: fix race during implicit transition work flushes target: allow userspace to set state to transitioning target: fix ALUA transition timeout handling ...
2017-03-19Merge branch 'libnvdimm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimmLinus Torvalds1-3/+30
Pull device-dax fixes from Dan Williams: "The device-dax driver was not being careful to handle falling back to smaller fault-granularity sizes. The driver already fails fault attempts that are smaller than the device's alignment, but it also needs to handle the cases where a larger page mapping could be established. For simplicity of the immediate fix the implementation just signals VM_FAULT_FALLBACK until fault-size == device-alignment. One fix is for -stable to address pmd-to-pte fallback from the original implementation, another fix is for the new (introduced in 4.11-rc1) pud-to-pmd regression, and a typo fix comes along for the ride. These have received a build success notification from the kbuild robot" * 'libnvdimm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm: device-dax: fix debug output typo device-dax: fix pud fault fallback handling device-dax: fix pmd/pte fault fallback handling
2017-03-18qla2xxx: Update driver version to 9.00.00.00-kHimanshu Madhani1-3/+3
Signed-off-by: Himanshu Madhani <himanshu.madhani@cavium.com> signed-off-by: Giridhar Malavali <giridhar.malavali@cavium.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2017-03-18qla2xxx: Fix delayed response to command for loop mode/direct connect.Quinn Tran6-20/+81
Current driver wait for FW to be in the ready state before processing in-coming commands. For Arbitrated Loop or Point-to- Point (not switch), FW Ready state can take a while. FW will transition to ready state after all Nports have been logged in. In the mean time, certain initiators have completed the login and starts IO. Driver needs to start processing all queues if FW is already started. Signed-off-by: Quinn Tran <quinn.tran@cavium.com> Signed-off-by: Himanshu Madhani <himanshu.madhani@cavium.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2017-03-18qla2xxx: Change scsi host lookup method.Quinn Tran7-40/+100
For target mode, when new scsi command arrive, driver first performs a look up of the SCSI Host. The current look up method is based on the ALPA portion of the NPort ID. For Cisco switch, the ALPA can not be used as the index. Instead, the new search method is based on the full value of the Nport_ID via btree lib. Signed-off-by: Quinn Tran <quinn.tran@cavium.com> Signed-off-by: Himanshu Madhani <himanshu.madhani@cavium.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2017-03-18qla2xxx: Add DebugFS node to display Port DatabaseHimanshu Madhani2-4/+90
Signed-off-by: Himanshu Madhani <himanshu.madhani@cavium.com> Signed-off-by: Giridhar Malavali <giridhar.malavali@cavium.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2017-03-18qla2xxx: Use IOCB interface to submit non-critical MBX.Quinn Tran6-65/+279
The Mailbox interface is currently over subscribed. We like to reserve the Mailbox interface for the chip managment and link initialization. Any non essential Mailbox command will be routed through the IOCB interface. The IOCB interface is able to absorb more commands. Following commands are being routed through IOCB interface - Get ID List (007Ch) - Get Port DB (0064h) - Get Link Priv Stats (006Dh) Signed-off-by: Quinn Tran <quinn.tran@cavium.com> Signed-off-by: Himanshu Madhani <himanshu.madhani@cavium.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2017-03-18qla2xxx: Add async new target notificationQuinn Tran2-3/+4
Signed-off-by: Quinn Tran <quinn.tran@cavium.com> Signed-off-by: Himanshu Madhani <himanshu.madhani@cavium.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2017-03-18qla2xxx: Export DIF stats via debugfsAnil Gurumurthy2-0/+27
Signed-off-by: Anil Gurumurthy <anil.gurumurthy@cavium.com> Signed-off-by: Himanshu Madhani <himanshu.madhani@cavium.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2017-03-18qla2xxx: Improve T10-DIF/PI handling in driver.Quinn Tran7-251/+406
Add routines to support T10 DIF tag. Signed-off-by: Quinn Tran <quinn.tran@cavium.com> Signed-off-by: Anil Gurumurthy <anil.gurumurthy@cavium.com> Signed-off-by: Himanshu Madhani <himanshu.madhani@cavium.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2017-03-18qla2xxx: Allow relogin to proceed if remote login did not finishQuinn Tran4-8/+32
If the remote port have started the login process, then the PLOGI and PRLI should be back to back. Driver will allow the remote port to complete the process. For the case where the remote port decide to back off from sending PRLI, this local port sets an expiration timer for the PRLI. Once the expiration time passes, the relogin retry logic is allowed to go through and perform login with the remote port. Signed-off-by: Quinn Tran <quinn.tran@qlogic.com> Signed-off-by: Himanshu Madhani <himanshu.madhani@cavium.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2017-03-18qla2xxx: Fix sess_lock & hardware_lock lock order problem.Quinn Tran1-23/+18
The main lock that needs to be held for CMD or TMR submission to upper layer is the sess_lock. The sess_lock is used to serialize cmd submission and session deletion. The addition of hardware_lock being held is not necessary. This patch removes hardware_lock dependency from CMD/TMR submission. Use hardware_lock only for error response in this case. Path1 CPU0 CPU1 ---- ---- lock(&(&ha->tgt.sess_lock)->rlock); lock(&(&ha->hardware_lock)->rlock); lock(&(&ha->tgt.sess_lock)->rlock); lock(&(&ha->hardware_lock)->rlock); Path2/deadlock *** DEADLOCK *** Call Trace: dump_stack+0x85/0xc2 print_circular_bug+0x1e3/0x250 __lock_acquire+0x1425/0x1620 lock_acquire+0xbf/0x210 _raw_spin_lock_irqsave+0x53/0x70 qlt_sess_work_fn+0x21d/0x480 [qla2xxx] process_one_work+0x1f4/0x6e0 Cc: <stable@vger.kernel.org> Cc: Bart Van Assche <Bart.VanAssche@sandisk.com> Reported-by: Bart Van Assche <Bart.VanAssche@sandisk.com> Signed-off-by: Quinn Tran <quinn.tran@cavium.com> Signed-off-by: Himanshu Madhani <himanshu.madhani@cavium.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2017-03-18qla2xxx: Fix inadequate lock protection for ABTS.Quinn Tran1-2/+10
Normally, ABTS is sent to Target Core as Task MGMT command. In the case of error, qla2xxx needs to send response, hardware_lock is required to prevent request queue corruption. Cc: <stable@vger.kernel.org> Signed-off-by: Quinn Tran <quinn.tran@cavium.com> Signed-off-by: Himanshu Madhani <himanshu.madhani@cavium.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2017-03-18qla2xxx: Fix request queue corruption.Quinn Tran1-3/+9
When FW notify driver or driver detects low FW resource, driver tries to send out Busy SCSI Status to tell Initiator side to back off. During the send process, the lock was not held. Cc: <stable@vger.kernel.org> Signed-off-by: Quinn Tran <quinn.tran@qlogic.com> Signed-off-by: Himanshu Madhani <himanshu.madhani@cavium.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2017-03-18qla2xxx: Fix memory leak for abts processingQuinn Tran1-0/+2
Cc: <stable@vger.kernel.org> Signed-off-by: Quinn Tran <quinn.tran@cavium.com> Signed-off-by: Himanshu Madhani <himanshu.madhani@cavium.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2017-03-18qla2xxx: Allow vref count to timeout on vport delete.Joe Carnuccio5-10/+16
Cc: <stable@vger.kernel.org> Signed-off-by: Joe Carnuccio <joe.carnuccio@cavium.com> Signed-off-by: Himanshu Madhani <himanshu.madhani@cavium.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.