aboutsummaryrefslogtreecommitdiffstats
AgeCommit message (Collapse)AuthorFilesLines
2021-10-18counter: fix docum. build problems after filename changeRandy Dunlap1-1/+1
Fix documentation build warnings due to a source file being renamed. WARNING: kernel-doc '../scripts/kernel-doc -rst -enable-lineno -sphinx-version 1.8.5 -export ../drivers/counter/counter.c' failed with return code 2 Error: Cannot open file ../drivers/counter/counter.c Fixes: aaec1a0f76ec ("counter: Internalize sysfs interface code") Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Cc: William Breathitt Gray <vilhelm.gray@gmail.com> Cc: linux-iio@vger.kernel.org Cc: Jonathan Cameron <Jonathan.Cameron@huawei.com> Cc: Jonathan Corbet <corbet@lwn.net> Cc: linux-doc@vger.kernel.org Acked-by: William Breathitt Gray <vilhelm.gray@gmail.com> Link: https://lore.kernel.org/r/20211005055157.22937-1-rdunlap@infradead.org Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2021-10-17counter: microchip-tcb-capture: Tidy up a false kernel-doc /** marking.Jonathan Cameron1-1/+1
Deals with W=1 warning This comment starts with '/**', but isn't a kernel-doc comment. Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Cc: Kamel Bouhara <kamel.bouhara@bootlin.com> Cc: William Breathitt Gray <vilhelm.gray@gmail.com> Acked-by: William Breathitt Gray <vilhelm.gray@gmail.com> Link: https://lore.kernel.org/r/20210930170347.101153-1-jic23@kernel.org
2021-10-17counter: 104-quad-8: Add IRQ support for the ACCES 104-QUAD-8William Breathitt Gray2-9/+164
The LSI/CSI LS7266R1 chip provides programmable output via the FLG pins. When interrupts are enabled on the ACCES 104-QUAD-8, they occur whenever FLG1 is active. Four functions are available for the FLG1 signal: Carry, Compare, Carry-Borrow, and Index. Carry: Interrupt generated on active low Carry signal. Carry signal toggles every time the respective channel's counter overflows. Compare: Interrupt generated on active low Compare signal. Compare signal toggles every time respective channel's preset register is equal to the respective channel's counter. Carry-Borrow: Interrupt generated on active low Carry signal and active low Borrow signal. Carry signal toggles every time the respective channel's counter overflows. Borrow signal toggles every time the respective channel's counter underflows. Index: Interrupt generated on active high Index signal. These four functions correspond respectivefly to the following four Counter event types: COUNTER_EVENT_OVERFLOW, COUNTER_EVENT_THRESHOLD, COUNTER_EVENT_OVERFLOW_UNDERFLOW, and COUNTER_EVENT_INDEX. Interrupts push Counter events to event channel X, where 'X' is the respective channel whose FLG1 activated. This patch adds IRQ support for the ACCES 104-QUAD-8. The interrupt line numbers for the devices may be configured via the irq array module parameter. Acked-by: Syed Nayyar Waris <syednwaris@gmail.com> Signed-off-by: William Breathitt Gray <vilhelm.gray@gmail.com> Link: https://lore.kernel.org/r/e3a28e100840e3a336fa93fce77445f0e9d9a674.1632884256.git.vilhelm.gray@gmail.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2021-10-17counter: 104-quad-8: Replace mutex with spinlockWilliam Breathitt Gray1-37/+52
This patch replaces the mutex I/O lock with a spinlock. This is in preparation for a subsequent patch adding IRQ support for 104-QUAD-8 devices; we can't sleep in an interrupt context, so we'll need to use a spinlock instead. Acked-by: Syed Nayyar Waris <syednwaris@gmail.com> Signed-off-by: William Breathitt Gray <vilhelm.gray@gmail.com> Link: https://lore.kernel.org/r/3f74491dec66de10d062978bcb7b9c2b3bdea86c.1632884256.git.vilhelm.gray@gmail.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2021-10-17counter: Implement events_queue_size sysfs attributeWilliam Breathitt Gray2-0/+53
The events_queue_size sysfs attribute provides a way for users to dynamically configure the Counter events queue size for the Counter character device interface. The size is in number of struct counter_event data structures. The number of elements will be rounded-up to a power of 2 due to a requirement of the kfifo_alloc function called during reallocation of the queue. Cc: Oleksij Rempel <o.rempel@pengutronix.de> Signed-off-by: William Breathitt Gray <vilhelm.gray@gmail.com> Link: https://lore.kernel.org/r/c914b2db2ea0a2637633bcc3e86ded3c94783f2e.1632884256.git.vilhelm.gray@gmail.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2021-10-17counter: Implement *_component_id sysfs attributesWilliam Breathitt Gray2-7/+42
The Generic Counter chrdev interface expects users to supply component IDs in order to select extensions for requests. In order for users to know what component ID belongs to which extension this information must be exposed. The *_component_id attribute provides a way for users to discover what component ID belongs to which respective extension. Cc: David Lechner <david@lechnology.com> Cc: Gwendal Grignou <gwendal@chromium.org> Cc: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: William Breathitt Gray <vilhelm.gray@gmail.com> Link: https://lore.kernel.org/r/8961a11edbb882fc689e468194f5be75f572443e.1632884256.git.vilhelm.gray@gmail.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2021-10-17counter: Implement signalZ_action_component_id sysfs attributeWilliam Breathitt Gray2-0/+52
The Generic Counter chrdev interface expects users to supply component IDs in order to select Synapses for requests. In order for users to know what component ID belongs to which Synapse this information must be exposed. The signalZ_action_component_id attribute provides a way for users to discover what component ID belongs to the respective Synapse. Cc: Gwendal Grignou <gwendal@chromium.org> Cc: Dan Carpenter <dan.carpenter@oracle.com> Reviewed-by: David Lechner <david@lechnology.com> Signed-off-by: William Breathitt Gray <vilhelm.gray@gmail.com> Link: https://lore.kernel.org/r/a6c81b2f1f5d0b8d59b1ebe4f0fed04914b07547.1632884256.git.vilhelm.gray@gmail.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2021-10-17tools/counter: Create Counter toolsWilliam Breathitt Gray5-6/+154
This creates an example Counter program under tools/counter/* to exemplify the Counter character device interface. Cc: Pavel Machek <pavel@ucw.cz> Signed-off-by: William Breathitt Gray <vilhelm.gray@gmail.com> Link: https://lore.kernel.org/r/7c0f975ba098952122302d258ec9ffdef04befaf.1632884256.git.vilhelm.gray@gmail.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2021-10-17docs: counter: Document character device interfaceWilliam Breathitt Gray2-41/+137
This patch adds high-level documentation about the Counter subsystem character device interface. Signed-off-by: William Breathitt Gray <vilhelm.gray@gmail.com> Link: https://lore.kernel.org/r/7a71dff2868195901d074ae2ec1b5611838d4b24.1632884256.git.vilhelm.gray@gmail.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2021-10-17counter: Add character device interfaceWilliam Breathitt Gray6-6/+798
This patch introduces a character device interface for the Counter subsystem. Device data is exposed through standard character device read operations. Device data is gathered when a Counter event is pushed by the respective Counter device driver. Configuration is handled via ioctl operations on the respective Counter character device node. Cc: David Lechner <david@lechnology.com> Cc: Gwendal Grignou <gwendal@chromium.org> Cc: Dan Carpenter <dan.carpenter@oracle.com> Cc: Oleksij Rempel <o.rempel@pengutronix.de> Signed-off-by: William Breathitt Gray <vilhelm.gray@gmail.com> Link: https://lore.kernel.org/r/b8b8c64b4065aedff43699ad1f0e2f8d1419c15b.1632884256.git.vilhelm.gray@gmail.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2021-10-17counter: Move counter enums to uapi headerWilliam Breathitt Gray3-41/+58
This is in preparation for a subsequent patch implementing a character device interface for the Counter subsystem. Reviewed-by: David Lechner <david@lechnology.com> Signed-off-by: William Breathitt Gray <vilhelm.gray@gmail.com> Link: https://lore.kernel.org/r/962a5f2027fafcf4f77c10e1baf520463960d1ee.1632884256.git.vilhelm.gray@gmail.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2021-10-17docs: counter: Update to reflect sysfs internalizationWilliam Breathitt Gray2-67/+185
The Counter subsystem architecture and driver implementations have changed in order to handle Counter sysfs interactions in a more consistent way. This patch updates the Generic Counter interface documentation to reflect the changes. Reviewed-by: David Lechner <david@lechnology.com> Signed-off-by: William Breathitt Gray <vilhelm.gray@gmail.com> Link: https://lore.kernel.org/r/91cded13c0145c0d3d0acfe765a2ccb6c9af7c3b.1630031207.git.vilhelm.gray@gmail.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2021-10-17counter: Update counter.h comments to reflect sysfs internalizationWilliam Breathitt Gray2-32/+33
The Counter subsystem architecture and driver implementations have changed in order to handle Counter sysfs interactions in a more consistent way. This patch updates the Generic Counter interface header file comments to reflect the changes. Signed-off-by: William Breathitt Gray <vilhelm.gray@gmail.com> Link: https://lore.kernel.org/r/19da8ae0c05381b0967c8a334b67f86b814eb880.1630031207.git.vilhelm.gray@gmail.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2021-10-17counter: Internalize sysfs interface codeWilliam Breathitt Gray16-2634/+1950
This is a reimplementation of the Generic Counter driver interface. There are no modifications to the Counter subsystem userspace interface, so existing userspace applications should continue to run seamlessly. The purpose of this patch is to internalize the sysfs interface code among the various counter drivers into a shared module. Counter drivers pass and take data natively (i.e. u8, u64, etc.) and the shared counter module handles the translation between the sysfs interface and the device drivers. This guarantees a standard userspace interface for all counter drivers, and helps generalize the Generic Counter driver ABI in order to support the Generic Counter chrdev interface (introduced in a subsequent patch) without significant changes to the existing counter drivers. Note, Counter device registration is the same as before: drivers populate a struct counter_device with components and callbacks, then pass the structure to the devm_counter_register function. However, what's different now is how the Counter subsystem code handles this registration internally. Whereas before callbacks would interact directly with sysfs data, this interaction is now abstracted and instead callbacks interact with native C data types. The counter_comp structure forms the basis for Counter extensions. The counter-sysfs.c file contains the code to parse through the counter_device structure and register the requested components and extensions. Attributes are created and populated based on type, with respective translation functions to handle the mapping between sysfs and the counter driver callbacks. The translation performed for each attribute is straightforward: the attribute type and data is parsed from the counter_attribute structure, the respective counter driver read/write callback is called, and sysfs I/O is handled before or after the driver read/write function is called. Cc: Jarkko Nikula <jarkko.nikula@linux.intel.com> Cc: Patrick Havelange <patrick.havelange@essensium.com> Cc: Kamel Bouhara <kamel.bouhara@bootlin.com> Cc: Maxime Coquelin <mcoquelin.stm32@gmail.com> Cc: Alexandre Torgue <alexandre.torgue@st.com> Cc: Dan Carpenter <dan.carpenter@oracle.com> Acked-by: Syed Nayyar Waris <syednwaris@gmail.com> Reviewed-by: David Lechner <david@lechnology.com> Tested-by: David Lechner <david@lechnology.com> Signed-off-by: William Breathitt Gray <vilhelm.gray@gmail.com> Reviewed-by: Fabrice Gasnier <fabrice.gasnier@foss.st.com> # for stm32 Link: https://lore.kernel.org/r/c68b4a1ffb195c1a2f65e8dd5ad7b7c14e79c6ef.1630031207.git.vilhelm.gray@gmail.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2021-10-17counter: stm32-timer-cnt: Provide defines for slave mode selectionWilliam Breathitt Gray2-8/+12
The STM32 timer permits configuration of the counter encoder mode via the slave mode control register (SMCR) slave mode selection (SMS) bits. This patch provides preprocessor defines for the supported encoder modes. Cc: Fabrice Gasnier <fabrice.gasnier@foss.st.com> Signed-off-by: William Breathitt Gray <vilhelm.gray@gmail.com> Reviewed-by: Fabrice Gasnier <fabrice.gasnier@foss.st.com> Link: https://lore.kernel.org/r/ad3d9cd7af580d586316d368f74964cbc394f981.1630031207.git.vilhelm.gray@gmail.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2021-10-17counter: stm32-lptimer-cnt: Provide defines for clock polaritiesWilliam Breathitt Gray2-3/+8
The STM32 low-power timer permits configuration of the clock polarity via the LPTIMX_CFGR register CKPOL bits. This patch provides preprocessor defines for the supported clock polarities. Cc: Fabrice Gasnier <fabrice.gasnier@foss.st.com> Signed-off-by: William Breathitt Gray <vilhelm.gray@gmail.com> Reviewed-by: Fabrice Gasnier <fabrice.gasnier@foss.st.com> Link: https://lore.kernel.org/r/a111c8905c467805ca530728f88189b59430f27e.1630031207.git.vilhelm.gray@gmail.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2021-09-12Linux 5.15-rc1Linus Torvalds1-2/+2
2021-09-12Merge tag 'perf-tools-for-v5.15-2021-09-11' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linuxLinus Torvalds36-175/+1147
Pull more perf tools updates from Arnaldo Carvalho de Melo: - Add missing fields and remove some duplicate fields when printing a perf_event_attr. - Fix hybrid config terms list corruption. - Update kernel header copies, some resulted in new kernel features being automagically added to 'perf trace' syscall/tracepoint argument id->string translators. - Add a file generated during the documentation build to .gitignore. - Add an option to build without libbfd, as some distros, like Debian consider its ABI unstable. - Add support to print a textual representation of IBS raw sample data in 'perf report'. - Fix bpf 'perf test' sample mismatch reporting - Fix passing arguments to stackcollapse report in a 'perf script' python script. - Allow build-id with trailing zeros. - Look for ImageBase in PE file to compute .text offset. * tag 'perf-tools-for-v5.15-2021-09-11' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux: (25 commits) tools headers UAPI: Update tools's copy of drm.h headers tools headers UAPI: Sync drm/i915_drm.h with the kernel sources tools headers UAPI: Sync linux/fs.h with the kernel sources tools headers UAPI: Sync linux/in.h copy with the kernel sources perf tools: Add an option to build without libbfd perf tools: Allow build-id with trailing zeros perf tools: Fix hybrid config terms list corruption perf tools: Factor out copy_config_terms() and free_config_terms() perf tools: Fix perf_event_attr__fprintf() missing/dupl. fields perf tools: Ignore Documentation dependency file perf bpf: Provide a weak btf__load_from_kernel_by_id() for older libbpf versions tools include UAPI: Update linux/mount.h copy perf beauty: Cover more flags in the move_mount syscall argument beautifier tools headers UAPI: Sync linux/prctl.h with the kernel sources tools include UAPI: Sync sound/asound.h copy with the kernel sources tools headers UAPI: Sync linux/kvm.h with the kernel sources tools headers UAPI: Sync x86's asm/kvm.h with the kernel sources perf report: Add support to print a textual representation of IBS raw sample data perf report: Add tools/arch/x86/include/asm/amd-ibs.h perf env: Add perf_env__cpuid, perf_env__{nr_}pmu_mappings ...
2021-09-12Merge tag 'compiler-attributes-for-linus-v5.15-rc1-v2' of git://github.com/ojeda/linuxLinus Torvalds4-9/+26
Pull compiler attributes updates from Miguel Ojeda: - Fix __has_attribute(__no_sanitize_coverage__) for GCC 4 (Marco Elver) - Add Nick as Reviewer for compiler_attributes.h (Nick Desaulniers) - Move __compiletime_{error|warning} (Nick Desaulniers) * tag 'compiler-attributes-for-linus-v5.15-rc1-v2' of git://github.com/ojeda/linux: compiler_attributes.h: move __compiletime_{error|warning} MAINTAINERS: add Nick as Reviewer for compiler_attributes.h Compiler Attributes: fix __has_attribute(__no_sanitize_coverage__) for GCC 4
2021-09-12Merge tag 'auxdisplay-for-linus-v5.15-rc1' of git://github.com/ojeda/linuxLinus Torvalds5-21/+36
Pull auxdisplay updates from Miguel Ojeda: "An assortment of improvements for auxdisplay: - Replace symbolic permissions with octal permissions (Jinchao Wang) - ks0108: Switch to use module_parport_driver() (Andy Shevchenko) - charlcd: Drop unneeded initializers and switch to C99 style (Andy Shevchenko) - hd44780: Fix oops on module unloading (Lars Poeschel) - Add I2C gpio expander example (Ralf Schlatterbeck)" * tag 'auxdisplay-for-linus-v5.15-rc1' of git://github.com/ojeda/linux: auxdisplay: Replace symbolic permissions with octal permissions auxdisplay: ks0108: Switch to use module_parport_driver() auxdisplay: charlcd: Drop unneeded initializers and switch to C99 style auxdisplay: hd44780: Fix oops on module unloading auxdisplay: Add I2C gpio expander example
2021-09-12Merge tag 'smp-urgent-2021-09-12' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds8-165/+598
Pull CPU hotplug updates from Thomas Gleixner: "Updates for the SMP and CPU hotplug: - Remove DEFINE_SMP_CALL_CACHE_FUNCTION() which is a left over of the original hotplug code and now causing trouble with the ARM64 cache topology setup due to the pointless SMP function call. It's not longer required as the hotplug callbacks are guaranteed to be invoked on the upcoming CPU. - Remove the deprecated and now unused CPU hotplug functions - Rewrite the CPU hotplug API documentation" * tag 'smp-urgent-2021-09-12' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: Documentation: core-api/cpuhotplug: Rewrite the API section cpu/hotplug: Remove deprecated CPU-hotplug functions. thermal: Replace deprecated CPU-hotplug functions. drivers: base: cacheinfo: Get rid of DEFINE_SMP_CALL_CACHE_FUNCTION()
2021-09-12Merge tag 'char-misc-5.15-rc1-lkdtm' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-miscLinus Torvalds2-11/+27
Pull misc driver fix from Greg KH: "Here is a single patch for 5.15-rc1, for the lkdtm misc driver. It resolves a build issue that many people were hitting with your current tree, and Kees and others felt would be good to get merged before -rc1 comes out, to prevent them from having to constantly hit it as many development trees restart on -rc1, not older -rc releases. It has NOT been in linux-next, but has passed 0-day testing and looks 'obviously correct' when reviewing it locally :)" * tag 'char-misc-5.15-rc1-lkdtm' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: lkdtm: Use init_uts_ns.name instead of macros
2021-09-12Merge tag 'for-linus-5.15-1' of git://github.com/cminyard/linux-ipmiLinus Torvalds1-12/+11
Pull IPMI updates from Corey Minyard: "A couple of very minor fixes for style and rate limiting. Nothing big, but probably needs to go in" * tag 'for-linus-5.15-1' of git://github.com/cminyard/linux-ipmi: char: ipmi: use DEVICE_ATTR helper macro ipmi: rate limit ipmi smi_event failure message
2021-09-12Merge tag 'sched_urgent_for_v5.15_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds2-5/+5
Pull scheduler fixes from Borislav Petkov: - Make sure the idle timer expires in hardirq context, on PREEMPT_RT - Make sure the run-queue balance callback is invoked only on the outgoing CPU * tag 'sched_urgent_for_v5.15_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: sched: Prevent balance_push() on remote runqueues sched/idle: Make the idle timer expire in hard interrupt context
2021-09-12Merge tag 'locking_urgent_for_v5.15_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds4-94/+120
Pull locking fixes from Borislav Petkov: - Fix the futex PI requeue machinery to not return to userspace in inconsistent state - Avoid a potential null pointer dereference in the ww_mutex deadlock check - Other smaller cleanups and optimizations * tag 'locking_urgent_for_v5.15_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: locking/rtmutex: Fix ww_mutex deadlock check futex: Remove unused variable 'vpid' in futex_proxy_trylock_atomic() futex: Avoid redundant task lookup futex: Clarify comment for requeue_pi_wake_futex() futex: Prevent inconsistent state and exit race futex: Return error code instead of assigning it without effect locking/rwsem: Add missing __init_rwsem() for PREEMPT_RT
2021-09-12Merge tag 'timers_urgent_for_v5.15_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds1-2/+7
Pull timer fix from Borislav Petkov: - Handle negative second values properly when converting a timespec64 to nanoseconds. * tag 'timers_urgent_for_v5.15_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: time: Handle negative seconds correctly in timespec64_to_ns()
2021-09-12Merge branch 'misc.namei' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfsLinus Torvalds2-59/+58
Pull namei updates from Al Viro: "Clearing fallout from mkdirat in io_uring series. The fix in the kern_path_locked() patch plus associated cleanups" * 'misc.namei' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: putname(): IS_ERR_OR_NULL() is wrong here namei: Standardize callers of filename_create() namei: Standardize callers of filename_lookup() rename __filename_parentat() to filename_parentat() namei: Fix use after free in kern_path_locked
2021-09-12Merge tag '5.15-rc-cifs-part2' of git://git.samba.org/sfrench/cifs-2.6Linus Torvalds12-21/+37
Pull smbfs updates from Steve French: "cifs/smb3 updates: - DFS reconnect fix - begin creating common headers for server and client - rename the cifs_common directory to smbfs_common to be more consistent ie change use of the name cifs to smb (smb3 or smbfs is more accurate, as the very old cifs dialect has long been superseded by smb3 dialects). In the future we can rename the fs/cifs directory to fs/smbfs. This does not include the set of multichannel fixes nor the two deferred close fixes (they are still being reviewed and tested)" * tag '5.15-rc-cifs-part2' of git://git.samba.org/sfrench/cifs-2.6: cifs: properly invalidate cached root handle when closing it cifs: move SMB FSCTL definitions to common code cifs: rename cifs_common to smbfs_common cifs: update FSCTL definitions
2021-09-11Merge tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhostLinus Torvalds41-325/+4127
Pull virtio updates from Michael Tsirkin: - vduse driver ("vDPA Device in Userspace") supporting emulated virtio block devices - virtio-vsock support for end of record with SEQPACKET - vdpa: mac and mq support for ifcvf and mlx5 - vdpa: management netlink for ifcvf - virtio-i2c, gpio dt bindings - misc fixes and cleanups * tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost: (39 commits) Documentation: Add documentation for VDUSE vduse: Introduce VDUSE - vDPA Device in Userspace vduse: Implement an MMU-based software IOTLB vdpa: Support transferring virtual addressing during DMA mapping vdpa: factor out vhost_vdpa_pa_map() and vhost_vdpa_pa_unmap() vdpa: Add an opaque pointer for vdpa_config_ops.dma_map() vhost-iotlb: Add an opaque pointer for vhost IOTLB vhost-vdpa: Handle the failure of vdpa_reset() vdpa: Add reset callback in vdpa_config_ops vdpa: Fix some coding style issues file: Export receive_fd() to modules eventfd: Export eventfd_wake_count to modules iova: Export alloc_iova_fast() and free_iova_fast() virtio-blk: remove unneeded "likely" statements virtio-balloon: Use virtio_find_vqs() helper vdpa: Make use of PFN_PHYS/PFN_UP/PFN_DOWN helper macro vsock_test: update message bounds test for MSG_EOR af_vsock: rename variables in receive loop virtio/vsock: support MSG_EOR bit processing vhost/vsock: support MSG_EOR bit processing ...
2021-09-11Merge tag 'riscv-for-linus-5.15-mw1' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linuxLinus Torvalds10-15/+22
Pull more RISC-V updates from Palmer Dabbelt: - A pair of defconfig additions, for NVMe and the EFI filesystem localization options. - A larger address space for stack randomization. - A cleanup to our install rules. - A DTS update for the Microchip Icicle board, to fix the serial console. - Support for build-time table sorting, which allows us to have __ex_table read-only. * tag 'riscv-for-linus-5.15-mw1' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux: riscv: Move EXCEPTION_TABLE to RO_DATA segment riscv: Enable BUILDTIME_TABLE_SORT riscv: dts: microchip: mpfs-icicle: Fix serial console riscv: move the (z)install rules to arch/riscv/Makefile riscv: Improve stack randomisation on RV64 riscv: defconfig: enable NLS_CODEPAGE_437, NLS_ISO8859_1 riscv: defconfig: enable BLK_DEV_NVME
2021-09-11Merge branch 'for-5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/jlawall/linuxLinus Torvalds2-1/+3
Pull coccinelle updates from Julia Lawall: "These changes update some existing semantic patches with respect to some recent changes in the kernel. Specifically, the change to kvmalloc.cocci searches for kfree_sensitive rather than kzfree, and the change to use_after_iter.cocci adds list_entry_is_head as a valid use of a list iterator index variable after the end of the loop" * 'for-5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/jlawall/linux: scripts: coccinelle: allow list_entry_is_head() to use pos coccinelle: api: rename kzfree to kfree_sensitive
2021-09-11tools headers UAPI: Update tools's copy of drm.h headersArnaldo Carvalho de Melo1-2/+12
Picking the changes from: 17ce9c61c71cbc0d ("drm: document DRM_IOCTL_MODE_RMFB") Doesn't result in any tooling changes: $ tools/perf/trace/beauty/drm_ioctl.sh > before $ cp include/uapi/drm/drm.h tools/include/uapi/drm/drm.h $ tools/perf/trace/beauty/drm_ioctl.sh > after $ diff -u before after Silencing these perf build warnings: Warning: Kernel ABI header at 'tools/include/uapi/drm/drm.h' differs from latest version at 'include/uapi/drm/drm.h' diff -u tools/include/uapi/drm/drm.h include/uapi/drm/drm.h Cc: Simon Ser <contact@emersion.fr> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2021-09-11tools headers UAPI: Sync drm/i915_drm.h with the kernel sourcesArnaldo Carvalho de Melo1-81/+417
To pick the changes in: b65a9489730a2494 ("drm/i915/userptr: Probe existence of backing struct pages upon creation") ee242ca704d38699 ("drm/i915/guc: Implement GuC priority management") 81340cf3bddded4f ("drm/i915/uapi: reject set_domain for discrete") 7961c5b60f23dff5 ("drm/i915: Add TTM offset argument to mmap.") aef7b67a79564f6c ("drm/i915/uapi: convert drm_i915_gem_userptr to kernel doc") e7737b67ab46ee0e ("drm/i915/uapi: reject caching ioctls for discrete") 3aa8c57fe25a9247 ("drm/i915/uapi: convert drm_i915_gem_set_domain to kernel doc") 289f5a72009b8f67 ("drm/i915/uapi: convert drm_i915_gem_caching to kernel doc") 4a766ae40ec83301 ("drm/i915: Drop the CONTEXT_CLONE API (v2)") 6ff6d61dd2a943bd ("drm/i915: Drop I915_CONTEXT_PARAM_NO_ZEROMAP") fe4751c3d513ff4f ("drm/i915: Drop I915_CONTEXT_PARAM_RINGSIZE") 577729533cdc4e37 ("drm/i915: Document the Virtual Engine uAPI") c649432e86ca677d ("drm/i915: Fix busy ioctl commentary") That doesn't result in any changes to tooling as no new ioctl were added (at least not perceived by tools/perf/trace/beauty/drm_ioctl.sh). Addressing this perf build warning: Warning: Kernel ABI header at 'tools/include/uapi/drm/i915_drm.h' differs from latest version at 'include/uapi/drm/i915_drm.h' diff -u tools/include/uapi/drm/i915_drm.h include/uapi/drm/i915_drm.h Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Jason Ekstrand <jason@jlekstrand.net> Cc: John Harrison <John.C.Harrison@Intel.com> Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: Matthew Auld <matthew.auld@intel.com> Cc: Matthew Brost <matthew.brost@intel.com> Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2021-09-11tools headers UAPI: Sync linux/fs.h with the kernel sourcesArnaldo Carvalho de Melo1-0/+1
To pick the change in: 7957d93bf32bc211 ("block: add ioctl to read the disk sequence number") It adds a new ioctl, but we are still not using that to generate tables for 'perf trace', so no changes in tooling. This silences this perf build warning: Warning: Kernel ABI header at 'tools/include/uapi/linux/fs.h' differs from latest version at 'include/uapi/linux/fs.h' diff -u tools/include/uapi/linux/fs.h include/uapi/linux/fs.h Cc: Jens Axboe <axboe@kernel.dk> Cc: Matteo Croce <mcroce@microsoft.com> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2021-09-11tools headers UAPI: Sync linux/in.h copy with the kernel sourcesArnaldo Carvalho de Melo1-10/+32
To pick the changes in: db243b796439c0ca ("net/ipv4/ipv6: Replace one-element arraya with flexible-array members") 2d3e5caf96b9449a ("net/ipv4: Replace one-element array with flexible-array member") That don't result in any change in tooling, the structs changed remains with the same layout. This addresses this build warning: Warning: Kernel ABI header at 'tools/include/uapi/linux/in.h' differs from latest version at 'include/uapi/linux/in.h' diff -u tools/include/uapi/linux/in.h include/uapi/linux/in.h Cc: David S. Miller <davem@davemloft.net> Cc: Gustavo A. R. Silva <gustavoars@kernel.org> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2021-09-11perf tools: Add an option to build without libbfdIan Rogers1-22/+25
Some distributions, like debian, don't link perf with libbfd. Add a build flag to make this configuration buildable and testable. This was inspired by: https://lore.kernel.org/linux-perf-users/20210910102307.2055484-1-tonyg@leastfixedpoint.com/T/#u Signed-off-by: Ian Rogers <irogers@google.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: tony garnock-jones <tonyg@leastfixedpoint.com> Link: http://lore.kernel.org/lkml/20210910225756.729087-1-irogers@google.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2021-09-11perf tools: Allow build-id with trailing zerosNamhyung Kim1-0/+10
Currently perf saves a build-id with size but old versions assumes the size of 20. In case the build-id is less than 20 (like for MD5), it'd fill the rest with 0s. I saw a problem when old version of perf record saved a binary in the build-id cache and new version of perf reads the data. The symbols should be read from the build-id cache (as the path no longer has the same binary) but it failed due to mismatch in the build-id. symsrc__init: build id mismatch for /home/namhyung/.debug/.build-id/53/e4c2f42a4c61a2d632d92a72afa08f00000000/elf. The build-id event in the data has 20 byte build-ids, but it saw a different size (16) when it reads the build-id of the elf file in the build-id cache. $ readelf -n ~/.debug/.build-id/53/e4c2f42a4c61a2d632d92a72afa08f00000000/elf Displaying notes found in: .note.gnu.build-id Owner Data size Description GNU 0x00000010 NT_GNU_BUILD_ID (unique build ID bitstring) Build ID: 53e4c2f42a4c61a2d632d92a72afa08f Let's fix this by allowing trailing zeros if the size is different. Fixes: 39be8d0115b321ed ("perf tools: Pass build_id object to dso__build_id_equal()") Signed-off-by: Namhyung Kim <namhyung@kernel.org> Acked-by: Jiri Olsa <jolsa@redhat.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Ian Rogers <irogers@google.com> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lore.kernel.org/lkml/20210910224630.1084877-1-namhyung@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2021-09-11perf tools: Fix hybrid config terms list corruptionAdrian Hunter2-9/+27
A config terms list was spliced twice, resulting in a never-ending loop when the list was traversed. Fix by using list_splice_init() and copying and freeing the lists as necessary. This patch also depends on patch "perf tools: Factor out copy_config_terms() and free_config_terms()" Example on ADL: Before: # perf record -e '{intel_pt//,cycles/aux-sample-size=4096/pp}' uname & # jobs [1]+ Running perf record -e "{intel_pt//,cycles/aux-sample-size=4096/pp}" uname # perf top -E 10 PerfTop: 4071 irqs/sec kernel: 6.9% exact: 100.0% lost: 0/0 drop: 0/0 [4000Hz cycles], (all, 24 CPUs) --------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------- 97.60% perf [.] __evsel__get_config_term 0.25% [kernel] [k] kallsyms_expand_symbol.constprop.13 0.24% perf [.] kallsyms__parse 0.15% [kernel] [k] _raw_spin_lock 0.14% [kernel] [k] number 0.13% [kernel] [k] advance_transaction 0.08% [kernel] [k] format_decode 0.08% perf [.] map__process_kallsym_symbol 0.08% perf [.] rb_insert_color 0.08% [kernel] [k] vsnprintf exiting. # kill %1 After: # perf record -e '{intel_pt//,cycles/aux-sample-size=4096/pp}' uname & Linux [ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 0.060 MB perf.data ] # perf script | head perf-exec 604 [001] 1827.312293: psb: psb offs: 0 ffffffffb8415e87 pt_config_start+0x37 ([kernel.kallsyms]) perf-exec 604 1827.312293: 1 branches: ffffffffb856a3bd event_sched_in.isra.133+0xfd ([kernel.kallsyms]) => ffffffffb856a9a0 perf_pmu_nop_void+0x0 ([kernel.kallsyms]) perf-exec 604 1827.312293: 1 branches: ffffffffb856b10e merge_sched_in+0x26e ([kernel.kallsyms]) => ffffffffb856a2c0 event_sched_in.isra.133+0x0 ([kernel.kallsyms]) perf-exec 604 1827.312293: 1 branches: ffffffffb856a45d event_sched_in.isra.133+0x19d ([kernel.kallsyms]) => ffffffffb8568b80 perf_event_set_state.part.61+0x0 ([kernel.kallsyms]) perf-exec 604 1827.312293: 1 branches: ffffffffb8568b86 perf_event_set_state.part.61+0x6 ([kernel.kallsyms]) => ffffffffb85662a0 perf_event_update_time+0x0 ([kernel.kallsyms]) perf-exec 604 1827.312293: 1 branches: ffffffffb856a35c event_sched_in.isra.133+0x9c ([kernel.kallsyms]) => ffffffffb8567610 perf_log_itrace_start+0x0 ([kernel.kallsyms]) perf-exec 604 1827.312293: 1 branches: ffffffffb856a377 event_sched_in.isra.133+0xb7 ([kernel.kallsyms]) => ffffffffb8403b40 x86_pmu_add+0x0 ([kernel.kallsyms]) perf-exec 604 1827.312293: 1 branches: ffffffffb8403b86 x86_pmu_add+0x46 ([kernel.kallsyms]) => ffffffffb8403940 collect_events+0x0 ([kernel.kallsyms]) perf-exec 604 1827.312293: 1 branches: ffffffffb8403a7b collect_events+0x13b ([kernel.kallsyms]) => ffffffffb8402cd0 collect_event+0x0 ([kernel.kallsyms]) Fixes: 30def61f64bac5 ("perf parse-events Create two hybrid cache events") Fixes: 94da591b1c7913 ("perf parse-events Create two hybrid raw events") Fixes: 9cbfa2f64c04d9 ("perf parse-events Create two hybrid hardware events") Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Acked-by: Jiri Olsa <jolsa@redhat.com> Cc: Jin Yao <yao.jin@linux.intel.com> Cc: Kan Liang <kan.liang@linux.intel.com> Link: https //lore.kernel.org/r/20210909125508.28693-3-adrian.hunter@intel.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2021-09-11perf tools: Factor out copy_config_terms() and free_config_terms()Adrian Hunter3-13/+19
Factor out copy_config_terms() and free_config_terms() so that they can be reused. Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Acked-by: Jiri Olsa <jolsa@redhat.com> Cc: Jin Yao <yao.jin@linux.intel.com> Cc: Kan Liang <kan.liang@linux.intel.com> Link: https //lore.kernel.org/r/20210909125508.28693-2-adrian.hunter@intel.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2021-09-11perf tools: Fix perf_event_attr__fprintf() missing/dupl. fieldsAdrian Hunter1-1/+4
Some fields are missing and text_poke is duplicated. Fix that up. Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Cc: Jiri Olsa <jolsa@redhat.com> Link: http://lore.kernel.org/lkml/20210911120550.12203-1-adrian.hunter@intel.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2021-09-11perf tools: Ignore Documentation dependency fileIan Rogers1-0/+1
When building directly on the checked out repository the build process produces a file that should be ignored, so add it to .gitignore. Fixes: a81df63a5df3e195 ("perf doc: Fix doc.dep") Reported-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Ian Rogers <irogers@google.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lore.kernel.org/lkml/20210910232249.739661-1-irogers@google.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2021-09-11Merge tag 'io_uring-5.15-2021-09-11' of git://git.kernel.dk/linux-blockLinus Torvalds2-13/+44
Pull io_uring fixes from Jens Axboe: - Fix an off-by-one in a BUILD_BUG_ON() check. Not a real issue right now as we have plenty of flags left, but could become one. (Hao) - Fix lockdep issue introduced in this merge window (me) - Fix a few issues with the worker creation (me, Pavel, Qiang) - Fix regression with wq_has_sleeper() for IOPOLL (Pavel) - Timeout link error propagation fix (Pavel) * tag 'io_uring-5.15-2021-09-11' of git://git.kernel.dk/linux-block: io_uring: fix off-by-one in BUILD_BUG_ON check of __REQ_F_LAST_BIT io_uring: fail links of cancelled timeouts io-wq: fix memory leak in create_io_worker() io-wq: fix silly logic error in io_task_work_match() io_uring: drop ctx->uring_lock before acquiring sqd->lock io_uring: fix missing mb() before waitqueue_active io-wq: fix cancellation on create-worker failure
2021-09-11Merge tag 'block-5.15-2021-09-11' of git://git.kernel.dk/linux-blockLinus Torvalds22-682/+805
Pull block fixes from Jens Axboe: - NVMe pull request from Christoph: - fix nvmet command set reporting for passthrough controllers (Adam Manzanares) - update a MAINTAINERS email address (Chaitanya Kulkarni) - set QUEUE_FLAG_NOWAIT for nvme-multipth (me) - handle errors from add_disk() (Luis Chamberlain) - update the keep alive interval when kato is modified (Tatsuya Sasaki) - fix a buffer overrun in nvmet_subsys_attr_serial (Hannes Reinecke) - do not reset transport on data digest errors in nvme-tcp (Daniel Wagner) - only call synchronize_srcu when clearing current path (Daniel Wagner) - revalidate paths during rescan (Hannes Reinecke) - Split out the fs/block_dev into block/fops.c and block/bdev.c, which has been long overdue. Do this now before -rc1, to avoid annoying conflicts due to this (Christoph) - blk-throtl use-after-free fix (Li) - Improve plug depth for multi-device plugs, greatly increasing md resync performance (Song) - blkdev_show() locking fix (Tetsuo) - n64cart error check fix (Yang) * tag 'block-5.15-2021-09-11' of git://git.kernel.dk/linux-block: n64cart: fix return value check in n64cart_probe() blk-mq: allow 4x BLK_MAX_REQUEST_COUNT at blk_plug for multiple_queues block: move fs/block_dev.c to block/bdev.c block: split out operations on block special files blk-throttle: fix UAF by deleteing timer in blk_throtl_exit() block: genhd: don't call blkdev_show() with major_names_lock held nvme: update MAINTAINERS email address nvme: add error handling support for add_disk() nvme: only call synchronize_srcu when clearing current path nvme: update keep alive interval when kato is modified nvme-tcp: Do not reset transport on data digest errors nvmet: fixup buffer overrun in nvmet_subsys_attr_serial() nvmet: return bool from nvmet_passthru_ctrl and nvmet_is_passthru_req nvmet: looks at the passthrough controller when initializing CAP nvme: move nvme_multi_css into nvme.h nvme-multipath: revalidate paths during rescan nvme-multipath: set QUEUE_FLAG_NOWAIT
2021-09-11Merge tag 'libata-5.15-2021-09-11' of git://git.kernel.dk/linux-blockLinus Torvalds1-2/+2
Pull libata maintainer update from Jens Axboe: "Damien agreed to take over maintainership of libata, and he would be a great candidate for it. Update the MAINTAINERS entry to reflect the change in maintainer and git tree" * tag 'libata-5.15-2021-09-11' of git://git.kernel.dk/linux-block: libata: pass over maintainership to Damien Le Moal
2021-09-11Merge tag 'trace-v5.15-3' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-traceLinus Torvalds3-25/+24
Pull tracing fixes from Steven Rostedt: "Minor fixes to the processing of the bootconfig tree" * tag 'trace-v5.15-3' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace: bootconfig: Rename xbc_node_find_child() to xbc_node_find_subkey() tracing/boot: Fix to check the histogram control param is a leaf node tracing/boot: Fix trace_boot_hist_add_array() to check array is value
2021-09-11Merge tag 'devicetree-fixes-for-5.15-1' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linuxLinus Torvalds5-16/+17
Pull devicetree fixes from Rob Herring: - Disable fw_devlinks on x86 DT platforms to fix OLPC - More replacing oneOf+const with enum on a few new schemas - Drop unnecessary type references on Xilinx SPI binding schema * tag 'devicetree-fixes-for-5.15-1' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: spi: dt-bindings: xilinx: Drop type reference on *-bits properties dt-bindings: More use 'enum' instead of 'oneOf' plus 'const' entries of: property: Disable fw_devlink DT support for X86
2021-09-11Merge tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linuxLinus Torvalds1-4/+0
Pull clk fix from Stephen Boyd: "One patch to fix an unused variable warning in a Qualcomm clk driver" * tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: clk: qcom: gcc-sm6350: Remove unused variable
2021-09-11Merge tag 'rtc-5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linuxLinus Torvalds9-64/+243
Pull RTC updates from Alexandre Belloni: "The broken down time conversion is similar to what is done in the time subsystem since v5.14. The rest is fairly straightforward. Subsystem: - Switch to Neri and Schneider time conversion algorithm Drivers: - rx8025: add rx8035 support - s5m: modernize driver and set range" * tag 'rtc-5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux: rtc: rx8010: select REGMAP_I2C dt-bindings: rtc: add Epson RX-8025 and RX-8035 rtc: rx8025: implement RX-8035 support rtc: cmos: remove stale REVISIT comments rtc: tps65910: Correct driver module alias rtc: move RTC_LIB_KUNIT_TEST to proper location rtc: lib_test: add MODULE_LICENSE rtc: Improve performance of rtc_time64_to_tm(). Add tests. rtc: s5m: set range rtc: s5m: enable wakeup only when available rtc: s5m: signal the core when alarm are not available rtc: s5m: switch to devm_rtc_allocate_device
2021-09-11Merge tag 'firewire-update' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394Linus Torvalds1-4/+0
Pull firewire updates from Stefan Richter: - Migrate the bus snooper driver 'nosy' from PCI to DMA API - Small janitorial cleanup in the IPv4/v6-over-1394 driver [ The 'nosy' change already come in as a different commit through Greg KH in the misc tree back in the previous merge window, so only the cleanup ends up being new to 5.15 - Linus ] * tag 'firewire-update' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394: firewire: nosy: switch from 'pci_' to 'dma_' API firewire: net: remove unused variable 'guid'
2021-09-11Merge tag 'pwm/for-5.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/thierry.reding/linux-pwmLinus Torvalds43-440/+260
Pull pwm updates from Thierry Reding: "The changes this time around are mostly janitorial in nature. A lot of this is simplifications of drivers using device-managed functions and improving compilation coverage. The Mediatek display PWM driver now supports the atomic API. Cleanups and minor fixes make up the remainder of this set" * tag 'pwm/for-5.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/thierry.reding/linux-pwm: (54 commits) pwm: mtk-disp: Implement atomic API .get_state() pwm: mtk-disp: Fix overflow in period and duty calculation pwm: mtk-disp: Implement atomic API .apply() pwm: mtk-disp: Adjust the clocks to avoid them mismatch dt-bindings: pwm: rockchip: Add description for rk3568 pwm: Make pwmchip_remove() return void pwm: sun4i: Don't check the return code of pwmchip_remove() pwm: sifive: Don't check the return code of pwmchip_remove() pwm: samsung: Don't check the return code of pwmchip_remove() pwm: renesas-tpu: Don't check the return code of pwmchip_remove() pwm: rcar: Don't check the return code of pwmchip_remove() pwm: pca9685: Don't check the return code of pwmchip_remove() pwm: omap-dmtimer: Don't check the return code of pwmchip_remove() pwm: mtk-disp: Don't check the return code of pwmchip_remove() pwm: imx-tpm: Don't check the return code of pwmchip_remove() pwm: img: Don't check the return code of pwmchip_remove() pwm: cros-ec: Don't check the return code of pwmchip_remove() pwm: brcmstb: Don't check the return code of pwmchip_remove() pwm: atmel-tcb: Don't check the return code of pwmchip_remove() pwm: atmel-hlcdc: Don't check the return code of pwmchip_remove() ...
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.