aboutsummaryrefslogtreecommitdiffstats
AgeCommit message (Collapse)AuthorFilesLines
2015-07-24RDMA/ocrdma: update ocrdma license to dual-licenseDevesh Sharma12-228/+408
Change of license from GPLv2 to dual-license (GPLv2 and BSD 2-Clause) All contributors were contacted off-list and permission to make this change was received. The complete list of contributors are Cc:ed here. Cc: Tejun Heo <tj@kernel.org> Cc: Duan Jiong <duanj.fnst@cn.fujitsu.com> Cc: Roland Dreier <roland@purestorage.com> Cc: Jes Sorensen <Jes.Sorensen@redhat.com> Cc: Sasha Levin <levinsasha928@gmail.com> Cc: Dan Carpenter <dan.carpenter@oracle.com> Cc: Prarit Bhargava <prarit@redhat.com> Cc: Colin Ian King <colin.king@canonical.com> Cc: Wei Yongjun <yongjun_wei@trendmicro.com.cn> Cc: Moni Shoua <monis@mellanox.com> Cc: Rasmus Villemoes <linux@rasmusvillemoes.dk> Cc: Li RongQing <roy.qing.li@gmail.com> Cc: Devendra Naga <devendra.aaru@gmail.com> Signed-off-by: Devesh Sharma <devesh.sharma@avagotech.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2015-07-24IB/ipoib: Fix CONFIG_INFINIBAND_IPOIB_CMJason Gunthorpe1-1/+2
If the above is turned off then ipoib_cm_dev_init unconditionally returns ENOSYS, and the newly added error handling in 0b3957 prevents ipoib from coming up at all: kernel: mlx4_0: ipoib_transport_dev_init failed kernel: mlx4_0: failed to initialize port 1 (ret = -12) Fixes: 0b39578bcde4 (IB/ipoib: Use dedicated workqueues per interface) Signed-off-by: Jason Gunthorpe <jgunthorpe@obsidianresearch.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2015-07-24RDMA/cxgb3: fail get_dma_mr on 64 bit archesSteve Wise1-0/+4
T3 HW only supports 32 bit MRs. If the system uses 64 bit memory addresses, then a registered 32 bit MR will wrap and write to the wrong memory when used with addresses > 4GB. To prevent this, simply fail to allocate an MR on 64 bit machines (other means of registering memory are still available and software can still work, we just don't allow this means of memory registration). Signed-off-by: Steve Wise <swise@opengridcomputing.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2015-07-14IB/core: Destroy ocrdma_dev_id IDR on module exitJohannes Thumshirn1-0/+1
Destroy ocrdma_dev_id IDR on module exit, reclaiming the allocated memory. This was detected by the following semantic patch (written by Luis Rodriguez <mcgrof@suse.com>) <SmPL> @ defines_module_init @ declarer name module_init, module_exit; declarer name DEFINE_IDR; identifier init; @@ module_init(init); @ defines_module_exit @ identifier exit; @@ module_exit(exit); @ declares_idr depends on defines_module_init && defines_module_exit @ identifier idr; @@ DEFINE_IDR(idr); @ on_exit_calls_destroy depends on declares_idr && defines_module_exit @ identifier declares_idr.idr, defines_module_exit.exit; @@ exit(void) { ... idr_destroy(&idr); ... } @ missing_module_idr_destroy depends on declares_idr && defines_module_exit && !on_exit_calls_destroy @ identifier declares_idr.idr, defines_module_exit.exit; @@ exit(void) { ... +idr_destroy(&idr); } </SmPL> Signed-off-by: Johannes Thumshirn <jthumshirn@suse.de> Signed-off-by: Doug Ledford <dledford@redhat.com>
2015-07-14IB/core: Destroy multcast_idr on module exitJohannes Thumshirn1-0/+1
Destroy multcast_idr on module exit, reclaiming the allocated memory. This was detected by the following semantic patch (written by Luis Rodriguez <mcgrof@suse.com>) <SmPL> @ defines_module_init @ declarer name module_init, module_exit; declarer name DEFINE_IDR; identifier init; @@ module_init(init); @ defines_module_exit @ identifier exit; @@ module_exit(exit); @ declares_idr depends on defines_module_init && defines_module_exit @ identifier idr; @@ DEFINE_IDR(idr); @ on_exit_calls_destroy depends on declares_idr && defines_module_exit @ identifier declares_idr.idr, defines_module_exit.exit; @@ exit(void) { ... idr_destroy(&idr); ... } @ missing_module_idr_destroy depends on declares_idr && defines_module_exit && !on_exit_calls_destroy @ identifier declares_idr.idr, defines_module_exit.exit; @@ exit(void) { ... +idr_destroy(&idr); } </SmPL> Signed-off-by: Johannes Thumshirn <jthumshirn@suse.de> Signed-off-by: Doug Ledford <dledford@redhat.com>
2015-07-14IB/mlx4: Optimize do_slave_initDoug Ledford1-7/+9
There is little chance our memory allocation will fail, so we can combine initializing the work structs with allocating them instead of looping through all of them once to allocate and again to initialize. Then when we need to actually find out if our device is up or in the process of going down, have all of our work structs batched up, take the spin_lock once and only once, and do all of the batch under the one spin_lock invocation instead of incurring all of the locked memory cycles we would otherwise incur to take/release the spin_lock over and over again. Signed-off-by: Doug Ledford <dledford@redhat.com>
2015-07-14IB/mlx4: Fix memory leak in do_slave_initDoug Ledford1-0/+2
We create a number of work structs to be queued up to a workqueue, and on completion of the workqueue handler, the workqueue handler frees the allocated memory. If, however, we don't queue the work struct because the device is going down, then we need to free the memory ourselves. Signed-off-by: Doug Ledford <dledford@redhat.com>
2015-07-14IB/mlx4: Optimize freeing of items on error unwindManinder Singh1-5/+3
On failure, we loop through all possible pointers and test them before calling kfree. But really, why even attempt to free items we didn't allocate when we can easily loop through exactly and only the devices for which the original memory allocation succeeded and free just those. Signed-off-by: Maninder Singh <maninder1.s@samsung.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2015-07-14IB/mlx4: Fix use of flow-counters for process_madOr Gerlitz1-10/+19
For IB links, reading HCA flow counters through iboe_process_mad() should be used when mlx4_ib_process_mad() is invoked only for VFs PMA queries and exactly nothing else. Fixes: 7193a141eb74 ('IB/mlx4: Set VF to read from QP counters') Reported-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2015-07-14IB/ipath: Convert use of __constant_<foo> to <foo>Vaishali Thakkar1-2/+2
In little endian cases, the macros be16_to_cpu and cpu_to_be64 unfolds to __swab{16,64} which provides special case for constants. In big endian cases, __constant_be16_to_cpu and be16_to_cpu expand directly to the same expression. The same applies for __constant_cpu_to_be64 and cpu_to_be64. So, replace __constant_be16_to_cpu with be16_to_cpu and __constant_cpu_to_be64 with cpu_to_be64, with the goal of getting rid of the definition of __constant_be16_to_cpu and __constant_cpu_to_be64 completely. Signed-off-by: Vaishali Thakkar <vthakkar1994@gmail.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2015-07-14IB/ipoib: Set MTU to max allowed by mode when mode changesErez Shitrit1-0/+1
When switching between modes (datagram / connected) change the MTU accordingly. datagram mode up to 4K, connected mode up to (64K - 0x10). Signed-off-by: ELi Cohen <eli@mellanox.com> Signed-off-by: Erez Shitrit <erezsh@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2015-07-14IB/ipoib: Scatter-Gather support in connected modeYuval Shaia4-46/+54
By default, IPoIB-CM driver uses 64k MTU. Larger MTU gives better performance. This MTU plus overhead puts the memory allocation for IP based packets at 32 4k pages (order 5), which have to be contiguous. When the system memory under pressure, it was observed that allocating 128k contiguous physical memory is difficult and causes serious errors (such as system becomes unusable). This enhancement resolve the issue by removing the physically contiguous memory requirement using Scatter/Gather feature that exists in Linux stack. With this fix Scatter-Gather will be supported also in connected mode. This change reverts some of the change made in commit e112373fd6aa ("IPoIB/cm: Reduce connected mode TX object size"). The ability to use SG in IPoIB CM is possible because the coupling between NETIF_F_SG and NETIF_F_CSUM was removed in commit ec5f06156423 ("net: Kill link between CSUM and SG features.") Signed-off-by: Yuval Shaia <yuval.shaia@oracle.com> Acked-by: Christian Marie <christian@ponies.io> Signed-off-by: Doug Ledford <dledford@redhat.com>
2015-07-14IB/ucm: Fix bitmap wrap when devnum > IB_UCM_MAX_DEVICESCarol L Soto1-2/+2
ib_ucm_release_dev clears the wrong bit if devnum is greater than IB_UCM_MAX_DEVICES. Signed-off-by: Carol L Soto <clsoto@linux.vnet.ibm.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2015-07-14IB/ipoib: Prevent lockdep warning in __ipoib_ib_dev_flushHaggai Eran1-6/+7
__ipoib_ib_dev_flush calls itself recursively on child devices, and lockdep complains about locking vlan_rwsem twice (see below). Use down_read_nested instead of down_read to prevent the warning. ============================================= [ INFO: possible recursive locking detected ] 4.1.0-rc4+ #36 Tainted: G O --------------------------------------------- kworker/u20:2/261 is trying to acquire lock: (&priv->vlan_rwsem){.+.+..}, at: [<ffffffffa0791e2a>] __ipoib_ib_dev_flush+0x3a/0x2b0 [ib_ipoib] but task is already holding lock: (&priv->vlan_rwsem){.+.+..}, at: [<ffffffffa0791e2a>] __ipoib_ib_dev_flush+0x3a/0x2b0 [ib_ipoib] other info that might help us debug this: Possible unsafe locking scenario: CPU0 ---- lock(&priv->vlan_rwsem); lock(&priv->vlan_rwsem); *** DEADLOCK *** May be due to missing lock nesting notation 3 locks held by kworker/u20:2/261: #0: ("%s""ipoib_flush"){.+.+..}, at: [<ffffffff810827cc>] process_one_work+0x15c/0x760 #1: ((&priv->flush_heavy)){+.+...}, at: [<ffffffff810827cc>] process_one_work+0x15c/0x760 #2: (&priv->vlan_rwsem){.+.+..}, at: [<ffffffffa0791e2a>] __ipoib_ib_dev_flush+0x3a/0x2b0 [ib_ipoib] stack backtrace: CPU: 3 PID: 261 Comm: kworker/u20:2 Tainted: G O 4.1.0-rc4+ #36 Hardware name: Red Hat KVM, BIOS 0.5.1 01/01/2007 Workqueue: ipoib_flush ipoib_ib_dev_flush_heavy [ib_ipoib] ffff8801c6c54790 ffff8801c9927af8 ffffffff81665238 0000000000000001 ffffffff825b5b30 ffff8801c9927bd8 ffffffff810bba51 ffff880100000000 ffffffff00000001 ffff880100000001 ffff8801c6c55428 ffff8801c6c54790 Call Trace: [<ffffffff81665238>] dump_stack+0x4f/0x6f [<ffffffff810bba51>] __lock_acquire+0x741/0x1820 [<ffffffff810bcbf8>] lock_acquire+0xc8/0x240 [<ffffffffa0791e2a>] ? __ipoib_ib_dev_flush+0x3a/0x2b0 [ib_ipoib] [<ffffffff81669d2c>] down_read+0x4c/0x70 [<ffffffffa0791e2a>] ? __ipoib_ib_dev_flush+0x3a/0x2b0 [ib_ipoib] [<ffffffffa0791e2a>] __ipoib_ib_dev_flush+0x3a/0x2b0 [ib_ipoib] [<ffffffffa0791e4a>] __ipoib_ib_dev_flush+0x5a/0x2b0 [ib_ipoib] [<ffffffffa07920ba>] ipoib_ib_dev_flush_heavy+0x1a/0x20 [ib_ipoib] [<ffffffff81082871>] process_one_work+0x201/0x760 [<ffffffff810827cc>] ? process_one_work+0x15c/0x760 [<ffffffff81082ef0>] worker_thread+0x120/0x4d0 [<ffffffff81082dd0>] ? process_one_work+0x760/0x760 [<ffffffff81082dd0>] ? process_one_work+0x760/0x760 [<ffffffff81088b7e>] kthread+0xfe/0x120 [<ffffffff81088a80>] ? __init_kthread_worker+0x70/0x70 [<ffffffff8166c6e2>] ret_from_fork+0x42/0x70 [<ffffffff81088a80>] ? __init_kthread_worker+0x70/0x70 Signed-off-by: Haggai Eran <haggaie@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2015-07-14IB/ucma: Fix lockdep warning in ucma_lock_filesHaggai Eran1-2/+2
The ucma_lock_files() locks the mut mutex on two files, e.g. for migrating an ID. Use mutex_lock_nested() to prevent the warning below. ============================================= [ INFO: possible recursive locking detected ] 4.1.0-rc6-hmm+ #40 Tainted: G O --------------------------------------------- pingpong_rpc_se/10260 is trying to acquire lock: (&file->mut){+.+.+.}, at: [<ffffffffa047ac55>] ucma_migrate_id+0xc5/0x248 [rdma_ucm] but task is already holding lock: (&file->mut){+.+.+.}, at: [<ffffffffa047ac4b>] ucma_migrate_id+0xbb/0x248 [rdma_ucm] other info that might help us debug this: Possible unsafe locking scenario: CPU0 ---- lock(&file->mut); lock(&file->mut); *** DEADLOCK *** May be due to missing lock nesting notation 1 lock held by pingpong_rpc_se/10260: #0: (&file->mut){+.+.+.}, at: [<ffffffffa047ac4b>] ucma_migrate_id+0xbb/0x248 [rdma_ucm] stack backtrace: CPU: 0 PID: 10260 Comm: pingpong_rpc_se Tainted: G O 4.1.0-rc6-hmm+ #40 Hardware name: Red Hat KVM, BIOS 0.5.1 01/01/2007 ffff8801f85b63d0 ffff880195677b58 ffffffff81668f49 0000000000000001 ffffffff825cbbe0 ffff880195677c38 ffffffff810bb991 ffff880100000000 ffff880100000000 ffff880100000001 ffff8801f85b7010 ffffffff8121bee9 Call Trace: [<ffffffff81668f49>] dump_stack+0x4f/0x6e [<ffffffff810bb991>] __lock_acquire+0x741/0x1820 [<ffffffff8121bee9>] ? dput+0x29/0x320 [<ffffffff810bcb38>] lock_acquire+0xc8/0x240 [<ffffffffa047ac55>] ? ucma_migrate_id+0xc5/0x248 [rdma_ucm] [<ffffffff8166b901>] ? mutex_lock_nested+0x291/0x3e0 [<ffffffff8166b6d5>] mutex_lock_nested+0x65/0x3e0 [<ffffffffa047ac55>] ? ucma_migrate_id+0xc5/0x248 [rdma_ucm] [<ffffffff810baeed>] ? trace_hardirqs_on+0xd/0x10 [<ffffffff8166b66e>] ? mutex_unlock+0xe/0x10 [<ffffffffa047ac55>] ucma_migrate_id+0xc5/0x248 [rdma_ucm] [<ffffffffa0478474>] ucma_write+0xa4/0xb0 [rdma_ucm] [<ffffffff81200674>] __vfs_write+0x34/0x100 [<ffffffff8112427c>] ? __audit_syscall_entry+0xac/0x110 [<ffffffff810ec055>] ? current_kernel_time+0xc5/0xe0 [<ffffffff812aa4d3>] ? security_file_permission+0x23/0x90 [<ffffffff8120088d>] ? rw_verify_area+0x5d/0xe0 [<ffffffff812009bb>] vfs_write+0xab/0x120 [<ffffffff81201519>] SyS_write+0x59/0xd0 [<ffffffff8112427c>] ? __audit_syscall_entry+0xac/0x110 [<ffffffff8166ffee>] system_call_fastpath+0x12/0x76 Signed-off-by: Haggai Eran <haggaie@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2015-07-14rds: rds_ib_device.refcount overflowWengang Wang1-1/+3
Fixes: 3e0249f9c05c ("RDS/IB: add refcount tracking to struct rds_ib_device") There lacks a dropping on rds_ib_device.refcount in case rds_ib_alloc_fmr failed(mr pool running out). this lead to the refcount overflow. A complain in line 117(see following) is seen. From vmcore: s_ib_rdma_mr_pool_depleted is 2147485544 and rds_ibdev->refcount is -2147475448. That is the evidence the mr pool is used up. so rds_ib_alloc_fmr is very likely to return ERR_PTR(-EAGAIN). 115 void rds_ib_dev_put(struct rds_ib_device *rds_ibdev) 116 { 117 BUG_ON(atomic_read(&rds_ibdev->refcount) <= 0); 118 if (atomic_dec_and_test(&rds_ibdev->refcount)) 119 queue_work(rds_wq, &rds_ibdev->free_work); 120 } fix is to drop refcount when rds_ib_alloc_fmr failed. Signed-off-by: Wengang Wang <wen.gang.wang@oracle.com> Reviewed-by: Haggai Eran <haggaie@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2015-07-14RDMA/nes: Fix for incorrect recording of the MAC addressTatyana Nikolova1-1/+1
Fix for incorrect recording of the MAC address Signed-off-by: Tatyana Nikolova <Tatyana.E.Nikolova@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2015-07-14RDMA/nes: Fix for resolving the neighTatyana Nikolova1-2/+3
Neighbor resolution doesn't work without this fix Signed-off-by: Tatyana Nikolova <Tatyana.E.Nikolova@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2015-07-14RDMA/core: Fixes for port mapper client registrationTatyana Nikolova3-25/+48
Fixes to allow clients to make remove mapping requests, after they have provided the user space service with the mapping information, they are using when the service is restarted. 1) Adding IWPM_REG_VALID, IWPM_REG_INCOMPL and IWPM_REG_UNDEF registration types for the port mapper clients and functions to set/check the registration type. 2) If the port mapper user space service is not available to register the client, then its registration stays IWPM_REG_UNDEF and the registration isn't checked until the service becomes available (no mappings are possible, if the user space service isn't running). 3) After the service is restarted, the user space port mapper pid is set to valid and the client registration is set to IWPM_REG_INCOMPL to allow the client to make remove mapping requests. Signed-off-by: Tatyana Nikolova <Tatyana.E.Nikolova@intel.com> Reviewed-by: Steve Wise <swise@opengridcomputing.com> Tested-by: Steve Wise <swise@opengridcomputing.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2015-07-14IB/IPoIB: Fix bad error flow in ipoib_add_port()Amir Vadai1-2/+4
Error values of ib_query_port() and ib_query_device() weren't propagated correctly. Because of that, ipoib_add_port() could return NULL value, which escaped the IS_ERR() check in ipoib_add_one() and we crashed. Signed-off-by: Amir Vadai <amirv@mellanox.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Reviewed-by: Ira Weiny <ira.weiny@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2015-07-14IB/mlx4: Do not attemp to report HCA clock offset on VFsMatan Barak1-5/+6
mlx4 VFs can provide CQE raw time-stamping services, but they don't have the hca core clock mapped to their PCI bars. As such, we should not attempt to query and report the clock offset to user space for VFs. Doing so causes query_device over VFs to fail with -ENOSUPP. Fixes: 4b664c4355b2 ('IB/mlx4: Add support for CQ time-stamping') Signed-off-by: Matan Barak <matanb@mellanox.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2015-07-14IB/cm: Do not queue work to a device that's going awayErez Shitrit1-6/+55
Whenever ib_cm gets remove_one call, like when there is a hot-unplug event, the driver should mark itself as going_down and confirm that no new works are going to be queued for that device. so, the order of the actions are: 1. mark the going_down bit. 2. flush the wq. 3. [make sure no new works for that device.] 4. unregister mad agent. otherwise, works that are already queued can be scheduled after the mad agent was freed. Signed-off-by: Erez Shitrit <erezsh@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2015-07-14IB/srp: Avoid using uninitialized variableSagi Grimberg3-8/+7
We might return res which is not initialized. Also reduce code duplication by exporting srp_parse_tmo so srp_tmo_set can reuse it. Detected by Coverity. Signed-off-by: Sagi Grimberg <sagig@mellanox.com> Signed-off-by: Jenny Falkovich <jennyf@mellanox.com> Reviewed-by: Bart Van Assche <bart.vanassche@sandisk.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2015-07-14IB/srpt: Convert use of __constant_cpu_to_beXX to cpu_to_beXXVaishali Thakkar1-36/+35
In little endian cases, the macro cpu_to_be{16,32,64} unfolds to __swab{16,32,64} which provides special case for constants. In big endian cases, __constant_cpu_to_be{16,32,64} and cpu_to_be{16,32,64} expand directly to the same expression. So, replace __constant_cpu_to_be{16,32,64} with cpu_to_be{16,32,64} with the goal of getting rid of the definitions of __constant_cpu_to_be{16,32,64} completely. The Coccinelle semantic patch that performs this transformation is as follows: @@expression x;@@ ( - __constant_cpu_to_be16(x) + cpu_to_be16(x) | - __constant_cpu_to_be32(x) + cpu_to_be32(x) | - __constant_cpu_to_be64(x) + cpu_to_be64(x) ) Signed-off-by: Vaishali Thakkar <vthakkar1994@gmail.com> Reviewed-by: Bart Van Assche <bart.vanassche@sandisk.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2015-07-14IB/mad: Remove improper use of BUG_ONIra Weiny7-14/+21
We recently added BUG_ON's which were inappropriate for a condition which should never happen. Change these to be WARN_ON_ONCE as a debugging aid. Fixes: 4cd7c9479aff ('IB/mad: Add support for additional MAD info to/from drivers') Signed-off-by: Ira Weiny <ira.weiny@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2015-07-14IB/mad: Fix compare between big endian and cpu endianIra Weiny1-1/+1
The define OPA_LID_PERMISSIVE is big endian and was compared to the cpu endian variable opa_drslid. Problem caught by 0-day build infrastructure. Fixes: 8e4349d13f33 (IB/mad: Add final OPA MAD processing) Signed-off-by: Ira Weiny <ira.weiny@intel.com> Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Reviewed-by: John, Jubin <jubin.john@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2015-07-14IB: Add rdma_cap_ib_switch helper and use where appropriateHal Rosenstock11-90/+66
Persuant to Liran's comments on node_type on linux-rdma mailing list: In an effort to reform the RDMA core and ULPs to minimize use of node_type in struct ib_device, an additional bit is added to struct ib_device for is_switch (IB switch). This is needed to be initialized by any IB switch device driver. This is a NEW requirement on such device drivers which are all "out of tree". In addition, an ib_switch helper was added to ib_verbs.h based on the is_switch device bit rather than node_type (although those should be consistent). The RDMA core (MAD, SMI, agent, sa_query, multicast, sysfs) as well as (IPoIB and SRP) ULPs are updated where appropriate to use this new helper. In some cases, the helper is now used under the covers of using rdma_[start end]_port rather than the open coding previously used. Reviewed-by: Sean Hefty <sean.hefty@intel.com> Reviewed-By: Jason Gunthorpe <jgunthorpe@obsidianresearch.com> Reviewed-by: Ira Weiny <ira.weiny@intel.com> Tested-by: Ira Weiny <ira.weiny@intel.com> Signed-off-by: Hal Rosenstock <hal@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2015-07-12Linux 4.2-rc2Linus Torvalds1-1/+1
2015-07-12Revert "drm/i915: Use crtc_state->active in primary check_plane func"Linus Torvalds1-1/+1
This reverts commit dec4f799d0a4c9edae20512fa60b0a36f3299ca2. Jörg Otte reports a NULL pointder dereference due to this commit, as 'crtc_state' very much can be NULL: crtc_state = state->base.state ? intel_atomic_get_crtc_state(state->base.state, intel_crtc) : NULL; So the change to test 'crtc_state->base.active' cannot possibly be correct as-is. There may be some other minimal fix (like just checking crtc_state for NULL), but I'm just reverting it now for the rc2 release, and people like Daniel Vetter who actually know this code will figure out what the right solution is in the longer term. Reported-and-bisected-by: Jörg Otte <jrg.otte@gmail.com> Cc: Ander Conselvan de Oliveira <ander.conselvan.de.oliveira@intel.com> Cc: Jani Nikula <jani.nikula@linux.intel.com> Cc: Daniel Vetter <daniel.vetter@intel.com> CC: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-07-12Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfsLinus Torvalds4-6/+10
Pull VFS fixes from Al Viro: "Fixes for this cycle regression in overlayfs and a couple of long-standing (== all the way back to 2.6.12, at least) bugs" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: freeing unlinked file indefinitely delayed fix a braino in ovl_d_select_inode() 9p: don't leave a half-initialized inode sitting around
2015-07-12Merge branch 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linusLinus Torvalds27-123/+214
Pull MIPS fixes from Ralf Baechle: "A fair number of 4.2 fixes also because Markos opened the flood gates. - Patch up the math used calculate the location for the page bitmap. - The FDC (Not what you think, FDC stands for Fast Debug Channel) IRQ around was causing issues on non-Malta platforms, so move the code to a Malta specific location. - A spelling fix replicated through several files. - Fix to the emulation of an R2 instruction for R6 cores. - Fix the JR emulation for R6. - Further patching of mindless 64 bit issues. - Ensure the kernel won't crash on CPUs with L2 caches with >= 8 ways. - Use compat_sys_getsockopt for O32 ABI on 64 bit kernels. - Fix cache flushing for multithreaded cores. - A build fix" * 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus: MIPS: O32: Use compat_sys_getsockopt. MIPS: c-r4k: Extend way_string array MIPS: Pistachio: Support CDMM & Fast Debug Channel MIPS: Malta: Make GIC FDC IRQ workaround Malta specific MIPS: c-r4k: Fix cache flushing for MT cores Revert "MIPS: Kconfig: Disable SMP/CPS for 64-bit" MIPS: cps-vec: Use macros for various arithmetics and memory operations MIPS: kernel: cps-vec: Replace KSEG0 with CKSEG0 MIPS: kernel: cps-vec: Use ta0-ta3 pseudo-registers for 64-bit MIPS: kernel: cps-vec: Replace mips32r2 ISA level with mips64r2 MIPS: kernel: cps-vec: Replace 'la' macro with PTR_LA MIPS: kernel: smp-cps: Fix 64-bit compatibility errors due to pointer casting MIPS: Fix erroneous JR emulation for MIPS R6 MIPS: Fix branch emulation for BLTC and BGEC instructions MIPS: kernel: traps: Fix broken indentation MIPS: bootmem: Don't use memory holes for page bitmap MIPS: O32: Do not handle require 32 bytes from the stack to be readable. MIPS, CPUFREQ: Fix spelling of Institute. MIPS: Lemote 2F: Fix build caused by recent mass rename.
2015-07-12Merge branch 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds13-91/+116
Pull x86 fixes from Thomas Gleixner: - the high latency PIT detection fix, which slipped through the cracks for rc1 - a regression fix for the early printk mechanism - the x86 part to plug irq/vector related hotplug races - move the allocation of the espfix pages on cpu hotplug to non atomic context. The current code triggers a might_sleep() warning. - a series of KASAN fixes addressing boot crashes and usability - a trivial typo fix for Kconfig help text * 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/kconfig: Fix typo in the CONFIG_CMDLINE_BOOL help text x86/irq: Retrieve irq data after locking irq_desc x86/irq: Use proper locking in check_irq_vectors_for_cpu_disable() x86/irq: Plug irq vector hotplug race x86/earlyprintk: Allow early_printk() to use console style parameters like '115200n8' x86/espfix: Init espfix on the boot CPU side x86/espfix: Add 'cpu' parameter to init_espfix_ap() x86/kasan: Move KASAN_SHADOW_OFFSET to the arch Kconfig x86/kasan: Add message about KASAN being initialized x86/kasan: Fix boot crash on AMD processors x86/kasan: Flush TLBs after switching CR3 x86/kasan: Fix KASAN shadow region page tables x86/init: Clear 'init_level4_pgt' earlier x86/tsc: Let high latency PIT fail fast in quick_pit_calibrate()
2015-07-12Merge branch 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds8-74/+155
Pull timer fixes from Thomas Gleixner: "This update from the timer departement contains: - A series of patches which address a shortcoming in the tick broadcast code. If the broadcast device is not available or an hrtimer emulated broadcast device, some of the original assumptions lead to boot failures. I rather plugged all of the corner cases instead of only addressing the issue reported, so the change got a little larger. Has been extensivly tested on x86 and arm. - Get rid of the last holdouts using do_posix_clock_monotonic_gettime() - A regression fix for the imx clocksource driver - An update to the new state callbacks mechanism for clockevents. This is required to simplify the conversion, which will take place in 4.3" * 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: tick/broadcast: Prevent NULL pointer dereference time: Get rid of do_posix_clock_monotonic_gettime cris: Replace do_posix_clock_monotonic_gettime() tick/broadcast: Unbreak CONFIG_GENERIC_CLOCKEVENTS=n build tick/broadcast: Handle spurious interrupts gracefully tick/broadcast: Check for hrtimer broadcast active early tick/broadcast: Return busy when IPI is pending tick/broadcast: Return busy if periodic mode and hrtimer broadcast tick/broadcast: Move the check for periodic mode inside state handling tick/broadcast: Prevent deep idle if no broadcast device available tick/broadcast: Make idle check independent from mode and config tick/broadcast: Sanity check the shutdown of the local clock_event tick/broadcast: Prevent hrtimer recursion clockevents: Allow set-state callbacks to be optional clocksource/imx: Define clocksource for mx27
2015-07-12Merge branch 'irq-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds3-6/+27
Pull irq fix from Thomas Gleixner: "A single fix for a cpu hotplug race vs. interrupt descriptors: Prevent irq setup/teardown across the cpu starting/dying parts of cpu hotplug so that the starting/dying cpu has a stable view of the descriptor space. This has been an issue for all architectures in the cpu dying phase, where interrupts are migrated away from the dying cpu. In the starting phase its mostly a x86 issue vs the vector space update" * 'irq-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: hotplug: Prevent alloc/free of irq descriptors during cpu up/down
2015-07-12freeing unlinked file indefinitely delayedAl Viro1-2/+5
Normally opening a file, unlinking it and then closing will have the inode freed upon close() (provided that it's not otherwise busy and has no remaining links, of course). However, there's one case where that does *not* happen. Namely, if you open it by fhandle with cold dcache, then unlink() and close(). In normal case you get d_delete() in unlink(2) notice that dentry is busy and unhash it; on the final dput() it will be forcibly evicted from dcache, triggering iput() and inode removal. In this case, though, we end up with *two* dentries - disconnected (created by open-by-fhandle) and regular one (used by unlink()). The latter will have its reference to inode dropped just fine, but the former will not - it's considered hashed (it is on the ->s_anon list), so it will stay around until the memory pressure will finally do it in. As the result, we have the final iput() delayed indefinitely. It's trivial to reproduce - void flush_dcache(void) { system("mount -o remount,rw /"); } static char buf[20 * 1024 * 1024]; main() { int fd; union { struct file_handle f; char buf[MAX_HANDLE_SZ]; } x; int m; x.f.handle_bytes = sizeof(x); chdir("/root"); mkdir("foo", 0700); fd = open("foo/bar", O_CREAT | O_RDWR, 0600); close(fd); name_to_handle_at(AT_FDCWD, "foo/bar", &x.f, &m, 0); flush_dcache(); fd = open_by_handle_at(AT_FDCWD, &x.f, O_RDWR); unlink("foo/bar"); write(fd, buf, sizeof(buf)); system("df ."); /* 20Mb eaten */ close(fd); system("df ."); /* should've freed those 20Mb */ flush_dcache(); system("df ."); /* should be the same as #2 */ } will spit out something like Filesystem 1K-blocks Used Available Use% Mounted on /dev/root 322023 303843 1131 100% / Filesystem 1K-blocks Used Available Use% Mounted on /dev/root 322023 303843 1131 100% / Filesystem 1K-blocks Used Available Use% Mounted on /dev/root 322023 283282 21692 93% / - inode gets freed only when dentry is finally evicted (here we trigger than by remount; normally it would've happened in response to memory pressure hell knows when). Cc: stable@vger.kernel.org # v2.6.38+; earlier ones need s/kill_it/unhash_it/ Acked-by: J. Bruce Fields <bfields@fieldses.org> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2015-07-12fix a braino in ovl_d_select_inode()Al Viro1-0/+3
when opening a directory we want the overlayfs inode, not one from the topmost layer. Reported-By: Andrey Jr. Melnikov <temnota.am@gmail.com> Tested-By: Andrey Jr. Melnikov <temnota.am@gmail.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2015-07-129p: don't leave a half-initialized inode sitting aroundAl Viro2-4/+2
Cc: stable@vger.kernel.org # all branches Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2015-07-11Merge branch 'libnvdimm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/djbw/nvdimmLinus Torvalds8-27/+223
Pull libnvdimm fixes from Dan Williams: "1) Fixes for a handful of smatch reports (Thanks Dan C.!) and minor bug fixes (patches 1-6) 2) Correctness fixes to the BLK-mode nvdimm driver (patches 7-10). Granted these are slightly large for a -rc update. They have been out for review in one form or another since the end of May and were deferred from the merge window while we settled on the "PMEM API" for the PMEM-mode nvdimm driver (ie memremap_pmem, memcpy_to_pmem, and wmb_pmem). Now that those apis are merged we implement them in the BLK driver to guarantee that mmio aperture moves stay ordered with respect to incoming read/write requests, and that writes are flushed through those mmio-windows and platform-buffers to be persistent on media. These pass the sub-system unit tests with the updates to tools/testing/nvdimm, and have received a successful build-report from the kbuild robot (468 configs). With acks from Rafael for the touches to drivers/acpi/" * 'libnvdimm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/djbw/nvdimm: nfit: add support for NVDIMM "latch" flag nfit: update block I/O path to use PMEM API tools/testing/nvdimm: add mock acpi_nfit_flush_address entries to nfit_test tools/testing/nvdimm: fix return code for unimplemented commands tools/testing/nvdimm: mock ioremap_wt pmem: add maintainer for include/linux/pmem.h nfit: fix smatch "use after null check" report nvdimm: Fix return value of nvdimm_bus_init() if class_create() fails libnvdimm: smatch cleanups in __nd_ioctl sparse: fix misplaced __pmem definition
2015-07-11Merge branch 'i2c/for-current' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linuxLinus Torvalds4-8/+25
Pull i2c fixes from Wolfram Sang: "Mostly slight adjusments for new drivers, but also one core fix for which finally the dependencies are now available as well" * 'i2c/for-current' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: i2c: Mark instantiated device nodes with OF_POPULATE i2c: jz4780: Fix return value if probe fails i2c: xgene-slimpro: Fix missing mbox_free_channel call in probe error path i2c: I2C_MT65XX should depend on HAS_DMA
2015-07-11Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/inputLinus Torvalds2-8/+6
Pull input fixes from Dmitry Torokhov: "A fix (revert) for a recent regression in Synaptics driver and a fix for Elan i2c touchpad driver" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: Revert "Input: synaptics - allocate 3 slots to keep stability in image sensors" Input: elan_i2c - change the hover event from MT to ST
2015-07-11Merge tag 'clk-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linuxLinus Torvalds15-50/+74
Pull clk fixes from Stephen Boyd: "A small set of fixes for problems found by smatch in new drivers that we added this rc and a handful of driver fixes that came in during the merge window" * tag 'clk-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: drivers: clk: st: Incorrect register offset used for lock_status clk: mediatek: mt8173: Fix enabling of critical clocks drivers: clk: st: Fix mux bit-setting for Cortex A9 clocks drivers: clk: st: Add CLK_GET_RATE_NOCACHE flag to clocks drivers: clk: st: Fix flexgen lock init drivers: clk: st: Fix FSYN channel values drivers: clk: st: Remove unused code clk: qcom: Use parent rate when set rate to pixel RCG clock clk: at91: do not leak resources clk: stm32: Fix out-by-one error path in the index lookup clk: iproc: fix bit manipulation arithmetic clk: iproc: fix memory leak from clock name
2015-07-11Merge branch 'drm-fixes' of git://people.freedesktop.org/~airlied/linuxLinus Torvalds27-717/+964
Pull drm fixes from Dave Airlie: "A bunch of fixes for radeon, intel, omap and one amdkfd fix. Radeon fixes are all over, but it does fix some cursor corruption across suspend/resume. i915 should fix the second warn you were seeing, so let us know if not. omap is a bunch of small fixes" * 'drm-fixes' of git://people.freedesktop.org/~airlied/linux: (28 commits) drm/radeon: disable vce init on cayman (v2) drm/amdgpu: fix timeout calculation drm/radeon: check if BO_VA is set before adding it to the invalidation list drm/radeon: allways add the VM clear duplicate Revert "Revert "drm/radeon: dont switch vt on suspend"" drm/radeon: Fold radeon_set_cursor() into radeon_show_cursor() drm/radeon: unpin cursor BOs on suspend and pin them again on resume (v2) drm/radeon: Clean up reference counting and pinning of the cursor BOs drm/amdkfd: validate pdd where it acquired first Revert "drm/i915: Allocate context objects from stolen" drm/i915: Declare the swizzling unknown for L-shaped configurations drm/radeon: fix underflow in r600_cp_dispatch_texture() drm/radeon: default to 2048 MB GART size on SI+ drm/radeon: fix HDP flushing drm/radeon: use RCU query for GEM_BUSY syscall drm/amdgpu: Handle irqs only based on irq ring, not irq status regs. drm/radeon: Handle irqs only based on irq ring, not irq status regs. drm/i915: Use crtc_state->active in primary check_plane func drm/i915: Check crtc->active in intel_crtc_disable_planes drm/i915: Restore all GGTT VMAs on resume ...
2015-07-11Merge branch 'for-linus2' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-securityLinus Torvalds2-1/+8
Pull selinux fixes from James Morris. * 'for-linus2' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security: selinux: fix mprotect PROT_EXEC regression caused by mm change selinux: don't waste ebitmap space when importing NetLabel categories
2015-07-11Merge branch 'for-linus-4.2' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfsLinus Torvalds13-124/+641
Pull btrfs fixes from Chris Mason: "This is an assortment of fixes. Most of the commits are from Filipe (fsync, the inode allocation cache and a few others). Mark kicked in a series fixing corners in the extent sharing ioctls, and everyone else fixed up on assorted other problems" * 'for-linus-4.2' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs: Btrfs: fix wrong check for btrfs_force_chunk_alloc() Btrfs: fix warning of bytes_may_use Btrfs: fix hang when failing to submit bio of directIO Btrfs: fix a comment in inode.c:evict_inode_truncate_pages() Btrfs: fix memory corruption on failure to submit bio for direct IO btrfs: don't update mtime/ctime on deduped inodes btrfs: allow dedupe of same inode btrfs: fix deadlock with extent-same and readpage btrfs: pass unaligned length to btrfs_cmp_data() Btrfs: fix fsync after truncate when no_holes feature is enabled Btrfs: fix fsync xattr loss in the fast fsync path Btrfs: fix fsync data loss after append write Btrfs: fix crash on close_ctree() if cleaner starts new transaction Btrfs: fix race between caching kthread and returning inode to inode cache Btrfs: use kmem_cache_free when freeing entry in inode cache Btrfs: fix race between balance and unused block group deletion btrfs: add error handling for scrub_workers_get() btrfs: cleanup noused initialization of dev in btrfs_end_bio() btrfs: qgroup: allow user to clear the limitation on qgroup
2015-07-11Merge tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-socLinus Torvalds23-19/+1373
Pull ARM SoC fixes from Kevin Hilman: "A fairly random colletion of fixes based on -rc1 for OMAP, sunxi and prima2 as well as a few arm64-specific DT fixes. This series also includes a late to support a new Allwinner (sunxi) SoC, but since it's rather simple and isolated to the platform-specific code, it's included it for this -rc" * tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: arm64: dts: add device tree for ARM SMM-A53x2 on LogicTile Express 20MG arm: dts: vexpress: add missing CCI PMU device node to TC2 arm: dts: vexpress: describe all PMUs in TC2 dts GICv3: Add ITS entry to THUNDER dts arm64: dts: Add poweroff button device node for APM X-Gene platform ARM: dts: am4372.dtsi: disable rfbi ARM: dts: am57xx-beagle-x15: Provide supply for usb2_phy2 ARM: dts: am4372: Add emif node Revert "ARM: dts: am335x-boneblack: disable RTC-only sleep" ARM: sunxi: Enable simplefb in the defconfig ARM: Remove deprecated symbol from defconfig files ARM: sunxi: Add Machine support for A33 ARM: sunxi: Introduce Allwinner H3 support Documentation: sunxi: Update Allwinner SoC documentation ARM: prima2: move to use REGMAP APIs for rtciobrg ARM: dts: atlas7: add pinctrl and gpio descriptions ARM: OMAP2+: Remove unnessary return statement from the void function, omap2_show_dma_caps memory: omap-gpmc: Fix parsing of devices
2015-07-11tick/broadcast: Prevent NULL pointer dereferenceThomas Gleixner1-8/+10
Dan reported that the recent changes to the broadcast code introduced a potential NULL dereference. Add the proper check. Fixes: e0454311903d "tick/broadcast: Sanity check the shutdown of the local clock_event" Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2015-07-10Merge branch 'parisc-4.2-1' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linuxLinus Torvalds6-170/+250
Pull parisc fixes from Helge Deller: "We have one important patch from Dave Anglin and myself which fixes PTE/TLB race conditions which caused random segmentation faults on our debian buildd servers, and one patch from Alex Ivanov which speeds up the graphical text console on the STI framebuffer driver" * 'parisc-4.2-1' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux: parisc: Fix some PTE/TLB race conditions and optimize __flush_tlb_range based on timing results stifb: Implement hardware accelerated copyarea
2015-07-11Merge branch 'upstream' of git://git.infradead.org/users/pcmoore/selinux into for-linus2James Morris2-1/+8
2015-07-10selinux: fix mprotect PROT_EXEC regression caused by mm changeStephen Smalley1-1/+2
commit 66fc13039422ba7df2d01a8ee0873e4ef965b50b ("mm: shmem_zero_setup skip security check and lockdep conflict with XFS") caused a regression for SELinux by disabling any SELinux checking of mprotect PROT_EXEC on shared anonymous mappings. However, even before that regression, the checking on such mprotect PROT_EXEC calls was inconsistent with the checking on a mmap PROT_EXEC call for a shared anonymous mapping. On a mmap, the security hook is passed a NULL file and knows it is dealing with an anonymous mapping and therefore applies an execmem check and no file checks. On a mprotect, the security hook is passed a vma with a non-NULL vm_file (as this was set from the internally-created shmem file during mmap) and therefore applies the file-based execute check and no execmem check. Since the aforementioned commit now marks the shmem zero inode with the S_PRIVATE flag, the file checks are disabled and we have no checking at all on mprotect PROT_EXEC. Add a test to the mprotect hook logic for such private inodes, and apply an execmem check in that case. This makes the mmap and mprotect checking consistent for shared anonymous mappings, as well as for /dev/zero and ashmem. Cc: <stable@vger.kernel.org> # 4.1.x Signed-off-by: Stephen Smalley <sds@tycho.nsa.gov> Signed-off-by: Paul Moore <pmoore@redhat.com>
2015-07-10Merge tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linuxLinus Torvalds8-9/+14
Pull arm64 fixes and clean-up from Catalin Marinas: - ACPI fix when checking the validity of the GICC MADT subtable - handle debug exceptions in the el*_inv exception entries - remove pointless register assignment in two compat syscall wrappers - unnecessary include path - defconfig update * tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: arm64: entry32: remove pointless register assignment arm64: entry: handle debug exceptions in el*_inv arm64: Keep the ARM64 Kconfig selects sorted ACPI / ARM64 : use the new BAD_MADT_GICC_ENTRY macro ACPI / ARM64: add BAD_MADT_GICC_ENTRY() macro arm64: defconfig: Add Ceva ahci to the defconfig arm64: remove another unnecessary libfdt include path
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.