aboutsummaryrefslogtreecommitdiffstats
AgeCommit message (Collapse)AuthorFilesLines
2015-02-25amd-xgbe-phy: PHY KX/KR mode differencesTom Lendacky2-2/+84
The PHY requires different settings for the Decision Feedback Analyzer (DFE) when running in KX mode vs. KR mode. Update the code to change these settings when changing modes in order to provide a more stable link. Additionally, adjust the 10GbE PQ skew default setting to a more sane value. Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-02-24r8169: Fix trivial typo in rtl_check_firmwareYannick Guerrini1-1/+1
Change 'firwmare' to 'firmware' Signed-off-by: Yannick Guerrini <yguerrini@tomshardware.fr> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-02-24xen-netback: release pending index before pushing Tx responsesDavid Vrabel1-8/+21
If the pending indexes are released /after/ pushing the Tx response then a stale pending index may be used if a new Tx request is immediately pushed by the frontend. The may cause various WARNINGs or BUGs if the stale pending index is actually still in use. Fix this by releasing the pending index before pushing the Tx response. The full barrier for the pending ring update is not required since the the Tx response push already has a suitable write barrier. Signed-off-by: David Vrabel <david.vrabel@citrix.com> Reviewed-by: Wei Liu <wei.liu2@citrix.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-02-24af_packet: don't pass empty blocks for PACKET_V3Alexander Drozdov1-1/+9
Before da413eec729d ("packet: Fixed TPACKET V3 to signal poll when block is closed rather than every packet") poll listening for an af_packet socket was not signaled if there was no packets to process. After the patch poll is signaled evety time when block retire timer expires. That happens because af_packet closes the current block on timeout even if the block is empty. Passing empty blocks to the user not only wastes CPU but also wastes ring buffer space increasing probability of packets dropping on small timeouts. Signed-off-by: Alexander Drozdov <al.drozdov@gmail.com> Cc: Dan Collins <dan@dcollins.co.nz> Cc: Willem de Bruijn <willemb@google.com> Cc: Guy Harris <guy@alum.mit.edu> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-02-24rtnetlink: avoid 0 sized arraysSasha Levin1-2/+2
Arrays (when not in a struct) "shall have a value greater than zero". GCC complains when it's not the case here. Fixes: ba7d49b1f0 ("rtnetlink: provide api for getting and setting slave info") Signed-off-by: Sasha Levin <sasha.levin@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-02-23ipv6: addrconf: validate new MTU before applying itMarcelo Leitner1-1/+16
Currently we don't check if the new MTU is valid or not and this allows one to configure a smaller than minimum allowed by RFCs or even bigger than interface own MTU, which is a problem as it may lead to packet drops. If you have a daemon like NetworkManager running, this may be exploited by remote attackers by forging RA packets with an invalid MTU, possibly leading to a DoS. (NetworkManager currently only validates for values too small, but not for too big ones.) The fix is just to make sure the new value is valid. That is, between IPV6_MIN_MTU and interface's MTU. Note that similar check is already performed at ndisc_router_discovery(), for when kernel itself parses the RA. Signed-off-by: Marcelo Ricardo Leitner <mleitner@redhat.com> Signed-off-by: Sabrina Dubroca <sd@queasysnail.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-02-23altera_tse: Fixes in NAPI and interrupt handling pathsVlastimil Setka1-23/+22
Incorrect NAPI polling caused WARNING at net/core/dev.c net_rx_action. Some stability issues were also seen at high throughput and system load before this patch. This patch contains several changes in altera_tse_main.c: - tse_rx() is fixed to not process more than `limit` frames - tse_poll() is refactored to match NAPI logic - only received frames are counted for return value - removed bogus condition `(rxcomplete >= budget || txcomplete > 0)` - replace by: if (rxcomplete < budget) -> call __napi_complete and enable irq - altera_isr() - replace spin_lock_irqsave() by spin_lock() - we are in isr - use spinlocks just over irq manipulation, not over __napi_schedule - reset IRQ first, then disable and schedule napi This is a cleaned up resubmission from Vlastimil's recent submission. Signed-off-by: Vlastimil Setka <setka@vsis.cz> Signed-off-by: Roman Pisl <rpisl@kky.zcu.cz> Signed-off-by: Vince Bridgers <vbridger@opensource.altera.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-02-23altera_tse: Correct typo in obtaining tx_fifo_depth from devicetreeVlastimil Setka1-1/+1
This patch corrects a typo in the way tx_fifo_depth is read from the devicetree. This patch was submitted by Vlastimil about a week ago, and is now cleaned up and resubmitted. Signed-off-by: Vlastimil Setka <setka@vsis.cz> Signed-off-by: Vince Bridgers <vbridger@opensource.altera.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-02-23net: compat: Ignore MSG_CMSG_COMPAT in compat_sys_{send, recv}msgCatalin Marinas1-9/+0
With commit a7526eb5d06b (net: Unbreak compat_sys_{send,recv}msg), the MSG_CMSG_COMPAT flag is blocked at the compat syscall entry points, changing the kernel compat behaviour from the one before the commit it was trying to fix (1be374a0518a, net: Block MSG_CMSG_COMPAT in send(m)msg and recv(m)msg). On 32-bit kernels (!CONFIG_COMPAT), MSG_CMSG_COMPAT is 0 and the native 32-bit sys_sendmsg() allows flag 0x80000000 to be set (it is ignored by the kernel). However, on a 64-bit kernel, the compat ABI is different with commit a7526eb5d06b. This patch changes the compat_sys_{send,recv}msg behaviour to the one prior to commit 1be374a0518a. The problem was found running 32-bit LTP (sendmsg01) binary on an arm64 kernel. Arguably, LTP should not pass 0xffffffff as flags to sendmsg() but the general rule is not to break user ABI (even when the user behaviour is not entirely sane). Fixes: a7526eb5d06b (net: Unbreak compat_sys_{send,recv}msg) Cc: Andy Lutomirski <luto@amacapital.net> Cc: David S. Miller <davem@davemloft.net> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-02-23irda: replace current->state by set_current_state()Fabian Frederick2-3/+3
Use helper functions to access current->state. Direct assignments are prone to races and therefore buggy. current->state = TASK_RUNNING can be replaced by __set_current_state() Thanks to Peter Zijlstra for the exact definition of the problem. Suggested-By: Peter Zijlstra <peterz@infradead.org> Signed-off-by: Fabian Frederick <fabf@skynet.be> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-02-23net: sched: export tc_connmark.h so it is uapi accessibleJamal Hadi Salim1-0/+1
Signed-off-by: Jamal Hadi Salim <jhs@mojatatu.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-02-23team: fix possible null pointer dereference in team_handle_frameJiri Pirko1-3/+1
Currently following race is possible in team: CPU0 CPU1 team_port_del team_upper_dev_unlink priv_flags &= ~IFF_TEAM_PORT team_handle_frame team_port_get_rcu team_port_exists priv_flags & IFF_TEAM_PORT == 0 return NULL (instead of port got from rx_handler_data) netdev_rx_handler_unregister The thing is that the flag is removed before rx_handler is unregistered. If team_handle_frame is called in between, team_port_exists returns 0 and team_port_get_rcu will return NULL. So do not check the flag here. It is guaranteed by netdev_rx_handler_unregister that team_handle_frame will always see valid rx_handler_data pointer. Signed-off-by: Jiri Pirko <jiri@resnulli.us> Fixes: 3d249d4ca7d0 ("net: introduce ethernet teaming device") Signed-off-by: David S. Miller <davem@davemloft.net>
2015-02-23decnet: Fix obvious o/0 typoRasmus Villemoes1-1/+1
Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-02-23rhashtable: initialize all rhashtable walker membersSasha Levin1-0/+3
Commit f2dba9c6ff ("rhashtable: Introduce rhashtable_walk_*") forgot to initialize the members of struct rhashtable_walker after allocating it, which caused an undefined value for 'resize' which is used later on. Fixes: f2dba9c6ff ("rhashtable: Introduce rhashtable_walk_*") Signed-off-by: Sasha Levin <sasha.levin@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-02-23Merge branch 'for-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetoothDavid S. Miller1-0/+1
Johan Hedberg says: ==================== pull request: bluetooth 2015-02-23 Here's one important fix for the 4.0-rc series. Refactoring of Intel Bluetooth controller detection ended up disabling some older ones which are based on CSR hardware. This patch re-introduces the necessary USB id and fixes the breakage. Please let me know if there are any issues pulling. Thanks. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2015-02-23Bluetooth: btusb: Fix issue with CSR based Intel Wireless controllersMarcel Holtmann1-0/+1
Older Wireless controllers from Intel used CSR chips to provide support for Bluetooth. The commit d0ac9eb72 (Bluetooth: btusb: Ignore unknown Intel devices with generic descriptor) disabled these older controllers. To enable them again, put them into the blacklist and mark them clearly as CSR based controllers. T: Bus=02 Lev=02 Prnt=02 Port=05 Cnt=01 Dev#= 3 Spd=12 MxCh= 0 D: Ver= 2.00 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=8087 ProdID=07da Rev=78.69 C:* #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr= 0mA I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=1ms E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 0 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms I: If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 9 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 9 Ivl=1ms I: If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 17 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 17 Ivl=1ms I: If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 25 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 25 Ivl=1ms I: If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 33 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 33 Ivl=1ms I: If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 49 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 49 Ivl=1ms Reported-by: Kenneth R. Crudup <kenny@panix.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2015-02-22tcp: fix tcp_should_expand_sndbuf() to use tcp_packets_in_flight()Neal Cardwell1-1/+1
tcp_should_expand_sndbuf() does not expand the send buffer if we have filled the congestion window. However, it should use tcp_packets_in_flight() instead of tp->packets_out to make this check. Testing has established that the difference matters a lot if there are many SACKed packets, causing a needless performance shortfall. Signed-off-by: Neal Cardwell <ncardwell@google.com> Signed-off-by: Yuchung Cheng <ycheng@google.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: Nandita Dukkipati <nanditad@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-02-22net: pktgen: disable xmit_clone on virtual devicesEric Dumazet1-0/+3
Trying to use burst capability (aka xmit_more) on a virtual device like bonding is not supported. For example, skb might be queued multiple times on a qdisc, with various list corruptions. Fixes: 38b2cf2982dc ("net: pktgen: packet bursting via skb->xmit_more") Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Alexei Starovoitov <ast@plumgrid.com> Acked-by: Alexei Starovoitov <ast@plumgrid.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-02-22r8169: Revert BQL and xmit_more support.David S. Miller1-23/+7
There are certain regressions which are pointing to these two commits which we are having a hard time resolving. So revert them for now. Specifically this reverts: commit 0bec3b700d106a8b0a34227b2976d1a582f1aab7 Author: Florian Westphal <fw@strlen.de> Date: Wed Jan 7 10:49:49 2015 +0100 r8169: add support for xmit_more and commit 1e918876853aa85435e0f17fd8b4a92dcfff53d6 Author: Florian Westphal <fw@strlen.de> Date: Wed Oct 1 13:38:03 2014 +0200 r8169: add support for Byte Queue Limits There were some attempts by Eric Dumazet to address some obvious problems in the TX flow, to see if they would fix the problems, but none of them seem to help for the regression reporters. Signed-off-by: David S. Miller <davem@davemloft.net>
2015-02-22wan: cosa: replace current->state by set_current_state()Fabian Frederick1-6/+6
Use helper functions to access current->state. Direct assignments are prone to races and therefore buggy. current->state = TASK_RUNNING is replaced by __set_current_state() Thanks to Peter Zijlstra for the exact definition of the problem. Suggested-By: Peter Zijlstra <peterz@infradead.org> Signed-off-by: Fabian Frederick <fabf@skynet.be> Acked-By: Jan "Yenya" Kasprzak <kas@fi.muni.cz> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-02-22hso: replace current->state by __set_current_state()Fabian Frederick1-1/+1
Use helper functions to access current->state. Direct assignments are prone to races and therefore buggy. Thanks to Peter Zijlstra for the exact definition of the problem. Suggested-By: Peter Zijlstra <peterz@infradead.org> Signed-off-by: Fabian Frederick <fabf@skynet.be> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-02-22mISDN: replace current->state by set_current_state()Fabian Frederick1-1/+1
Use helper function to access current->state. Direct assignments are prone to races and therefore buggy. Thanks to Peter Zijlstra for the exact definition of the problem. Signed-off-by: Fabian Frederick <fabf@skynet.be> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-02-21af_packet: allow packets defragmentation not only for hash fanout typeAlexander Drozdov1-5/+5
Packets defragmentation was introduced for PACKET_FANOUT_HASH only, see 7736d33f4262 ("packet: Add pre-defragmentation support for ipv4 fanouts") It may be useful to have defragmentation enabled regardless of fanout type. Without that, the AF_PACKET user may have to: 1. Collect fragments from different rings 2. Defragment by itself Signed-off-by: Alexander Drozdov <al.drozdov@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-02-21rhashtable: ensure cache line alignment on bucket_tableEric Dumazet1-4/+5
struct bucket_table contains mostly read fields : size, locks_mask, locks. Make sure these are not sharing a cache line with buckets[] Signed-off-by: Eric Dumazet <edumazet@google.com> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Thomas Graf <tgraf@suug.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-02-21net: reject creation of netdev names with colonsMatthew Thode1-1/+1
colons are used as a separator in netdev device lookup in dev_ioctl.c Specific functions are SIOCGIFTXQLEN SIOCETHTOOL SIOCSIFNAME Signed-off-by: Matthew Thode <mthode@mthode.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-02-20net: dsa: bcm_sf2: fix 64-bits register readsFlorian Fainelli1-1/+1
Reading 64-bits register was not working because we inverted the steps between reading the lower 32-bits of the register and reading the upper 32-bits. Swapping these operations is how the HW guarantees that 64-bits reads are latched correctly. We only have a handful of 64-bits registers for now, mostly MIB counters, so the imapct is low. Fixes: 246d7f773c13 ("net: dsa: add Broadcom SF2 switch driver") Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-02-20rhashtable: allow to unload test moduleDaniel Borkmann1-0/+5
There's no good reason why to disallow unloading of the rhashtable test case module. Commit 9d6dbe1bbaf8 moved the code from a boot test into a stand-alone module, but only converted the subsys_initcall() handler into a module_init() function without a related exit handler, and thus preventing the test module from unloading. Fixes: 9d6dbe1bbaf8 ("rhashtable: Make selftest modular") Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Thomas Graf <tgraf@suug.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-02-20rhashtable: better high order allocation attemptsDaniel Borkmann1-3/+3
When trying to allocate future tables via bucket_table_alloc(), it seems overkill on large table shifts that we probe for kzalloc() unconditionally first, as it's likely to fail. Only probe with kzalloc() for more reasonable table sizes and use vzalloc() either as a fallback on failure or directly in case of large table sizes. Fixes: 7e1e77636e36 ("lib: Resizable, Scalable, Concurrent Hash Table") Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Thomas Graf <tgraf@suug.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-02-20rhashtable: don't test for shrink on insert, expansion on deleteDaniel Borkmann1-9/+18
Restore pre 54c5b7d311c8 behaviour and only probe for expansions on inserts and shrinks on deletes. Currently, it will happen that on initial inserts into a sparse hash table, we may i.e. shrink it first simply because it's not fully populated yet, only to later realize that we need to grow again. This however is counter intuitive, e.g. an initial default size of 64 elements is already small enough, and in case an elements size hint is given to the hash table by a user, we should avoid unnecessary expansion steps, so a shrink is clearly unintended here. Fixes: 54c5b7d311c8 ("rhashtable: introduce rhashtable_wakeup_worker helper function") Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Cc: Ying Xue <ying.xue@windriver.com> Acked-by: Thomas Graf <tgraf@suug.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-02-20Merge git://git.kernel.org/pub/scm/linux/kernel/git/pablo/nfDavid S. Miller4-18/+28
Pablo Neira Ayuso says: ==================== Netfilter/IPVS fixes for net The following patchset contains updates for your net tree, they are: 1) Fix removal of destination in IPVS when the new mixed family support is used, from Alexey Andriyanov via Simon Horman. 2) Fix module refcount undeflow in nft_compat when reusing a match / target. 3) Fix iptables-restore when the recent match is used with a new hitcount that exceeds threshold, from Florian Westphal. 4) Fix stack corruption in xt_socket due to using stack storage to save the inner IPv6 header, from Eric Dumazet. I'll follow up soon with another batch with more fixes that are still cooking. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2015-02-20caif: fix a signedness bug in cfpkt_iterate()Dan Carpenter3-5/+5
The cfpkt_iterate() function can return -EPROTO on error, but the function is a u16 so the negative value gets truncated to a positive unsigned short. This causes a static checker warning. The only caller which might care is cffrml_receive(), when it's checking the frame checksum. I modified cffrml_receive() so that it never says -EPROTO is a valid checksum. Also this isn't ever going to be inlined so I removed the "inline". Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-02-20cxgb4: Fix incorrect 'c' suffix to %pI4, use %pISc insteadAnish Bhatt2-30/+33
Issue caught by 0-day kernel test infrastructure. Code changed to use sockaddr members so that %pISc can be used instead. Fixes: b5a02f503caa ('cxgb4 : Update ipv6 address handling api') Signed-off-by: Anish Bhatt <anish@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-02-20ethtool: Add hw-switch-offload to netdev_features_strings.Rami Rosen1-0/+1
commit aafb3e98b279 (netdev: introduce new NETIF_F_HW_SWITCH_OFFLOAD feature flag for switch device offloads) add a new feature without adding it to netdev_features_strings array; this patch fixes this. Signed-off-by: Rami Rosen <ramirose@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-02-20ipvlan: Fix text that talks about ip util supportMahesh Bandewar1-1/+1
ipvlan was added into 3.19 release and iproute2 added support for the same in iproute2-3.19 package. Signed-off-by: Mahesh Bandewar <maheshb@google.com> CC: Stephen Hemminger <stephen@networkplumber.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-02-20rhashtable: don't allocate ht structure on stack in test_rht_initDaniel Borkmann1-1/+2
With object runtime debugging enabled, the rhashtable test suite will rightfully throw a warning "ODEBUG: object is on stack, but not annotated" from rhashtable_init(). This is because run_work is (correctly) being initialized via INIT_WORK(), and not annotated by INIT_WORK_ONSTACK(). Meaning, rhashtable_init() is okay as is, we just need to move ht e.g., into global scope. It never triggered anything, since test_rhashtable is rather a controlled environment and effectively runs to completion, so that stack memory is not vanishing underneath us, we shouldn't confuse any testers with it though. Fixes: 7e1e77636e36 ("lib: Resizable, Scalable, Concurrent Hash Table") Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Thomas Graf <tgraf@suug.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-02-20net/appletalk: LTPC needs virt_to_busArnd Bergmann1-1/+1
The ltpc driver is rather outdated and does not get built on most platforms because it requires the ISA_DMA_API symbol. However there are some ARM platforms that have ISA_DMA_API but no virt_to_bus, and they get this build error when enabling the ltpc driver. drivers/net/appletalk/ltpc.c: In function 'handlefc': drivers/net/appletalk/ltpc.c:380:2: error: implicit declaration of function 'virt_to_bus' [-Werror=implicit-function-declaration] set_dma_addr(dma,virt_to_bus(ltdmacbuf)); ^ This adds another dependency in Kconfig to avoid that configuration. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-02-20net: smc91x: improve neponset hackArnd Bergmann1-1/+1
The smc91x driver tries to support multiple platforms at compile time, but they are mutually exclusive at runtime, and not clearly defined. Trying to build for CONFIG_SA1100_ASSABET without CONFIG_ASSABET_NEPONSET results in this link error: drivers/built-in.o: In function `smc_drv_probe': :(.text+0x33310c): undefined reference to `neponset_ncr_frob' since the neponset_ncr_set function is not defined otherwise. Similarly, building for both CONFIG_SA1100_ASSABET and CONFIG_SA1100_PLEB results in a different build error: smsc/smc91x.c: In function 'smc_drv_probe': smsc/smc91x.c:2299:2: error: implicit declaration of function 'neponset_ncr_set' [-Werror=implicit-function-declaration] neponset_ncr_set(NCR_ENET_OSC_EN); ^ smsc/smc91x.c:2299:19: error: 'NCR_ENET_OSC_EN' undeclared (first use in this function) neponset_ncr_set(NCR_ENET_OSC_EN); ^ This is an attempt to fix the call site responsible for both errors, making sure we call the function exactly when the driver is actually trying to run on the assabet/neponset machine. With this patch, I no longer see randconfig build errors in this file. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-02-20sock: sock_dequeue_err_skb() needs hard irq safetyEric Dumazet1-2/+3
Non NAPI drivers can call skb_tstamp_tx() and then sock_queue_err_skb() from hard IRQ context. Therefore, sock_dequeue_err_skb() needs to block hard irq or corruptions or hangs can happen. Signed-off-by: Eric Dumazet <edumazet@google.com> Fixes: 364a9e93243d1 ("sock: deduplicate errqueue dequeue") Fixes: cb820f8e4b7f7 ("net: Provide a generic socket error queue delivery method for Tx time stamps.") Signed-off-by: David S. Miller <davem@davemloft.net>
2015-02-20net: Initialize all members in skb_gro_remcsum_init()Geert Uytterhoeven1-0/+1
skb_gro_remcsum_init() initializes the gro_remcsum.delta member only, leading to compiler warnings about a possibly uninitialized gro_remcsum.offset member: drivers/net/vxlan.c: In function ‘vxlan_gro_receive’: drivers/net/vxlan.c:602: warning: ‘grc.offset’ may be used uninitialized in this function net/ipv4/fou.c: In function ‘gue_gro_receive’: net/ipv4/fou.c:262: warning: ‘grc.offset’ may be used uninitialized in this function While these are harmless for now: - skb_gro_remcsum_process() sets offset before changing delta, - skb_gro_remcsum_cleanup() checks if delta is non-zero before accessing offset, it's safer to let the initialization function initialize all members. Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Acked-by: Tom Herbert <therbert@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-02-20ethernet/ixp4xx: prevent allmulti from clobbering promiscDerrick Pallas1-1/+1
If both promisc and allmulti are set, promisc should trump allmulti and disable the MAC filter; otherwise, the interface is not really promisc. Previously, this code checked IFF_ALLMULTI prior to and without regard for IFF_PROMISC; if both were set, only multicast and direct unicast traffic would make it through the filter. Signed-off-by: Derrick Pallas <pallas@meraki.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-02-20openvswitch: Fix net exit.Pravin B Shelar2-2/+45
Open vSwitch allows moving internal vport to different namespace while still connected to the bridge. But when namespace deleted OVS does not detach these vports, that results in dangling pointer to netdevice which causes kernel panic as follows. This issue is fixed by detaching all ovs ports from the deleted namespace at net-exit. BUG: unable to handle kernel NULL pointer dereference at 0000000000000028 IP: [<ffffffffa0aadaa5>] ovs_vport_locate+0x35/0x80 [openvswitch] Oops: 0000 [#1] SMP Call Trace: [<ffffffffa0aa6391>] lookup_vport+0x21/0xd0 [openvswitch] [<ffffffffa0aa65f9>] ovs_vport_cmd_get+0x59/0xf0 [openvswitch] [<ffffffff8167e07c>] genl_family_rcv_msg+0x1bc/0x3e0 [<ffffffff8167e319>] genl_rcv_msg+0x79/0xc0 [<ffffffff8167d919>] netlink_rcv_skb+0xb9/0xe0 [<ffffffff8167deac>] genl_rcv+0x2c/0x40 [<ffffffff8167cffd>] netlink_unicast+0x12d/0x1c0 [<ffffffff8167d3da>] netlink_sendmsg+0x34a/0x6b0 [<ffffffff8162e140>] sock_sendmsg+0xa0/0xe0 [<ffffffff8162e5e8>] ___sys_sendmsg+0x408/0x420 [<ffffffff8162f541>] __sys_sendmsg+0x51/0x90 [<ffffffff8162f592>] SyS_sendmsg+0x12/0x20 [<ffffffff81764ee9>] system_call_fastpath+0x12/0x17 Reported-by: Assaf Muller <amuller@redhat.com> Fixes: 46df7b81454("openvswitch: Add support for network namespaces.") Signed-off-by: Pravin B Shelar <pshelar@nicira.com> Reviewed-by: Thomas Graf <tgraf@noironetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-02-20ematch: Fix auto-loading of ematch modules.Ignacy Gawędzki1-0/+1
In tcf_em_validate(), after calling request_module() to load the kind-specific module, set em->ops to NULL before returning -EAGAIN, so that module_put() is not called again by tcf_em_tree_destroy(). Signed-off-by: Ignacy Gawędzki <ignacy.gawedzki@green-communications.fr> Acked-by: Cong Wang <cwang@twopensource.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-02-20net: phy: Fix verification of EEE support in phy_init_eeeGuenter Roeck1-3/+20
phy_init_eee uses phy_find_setting(phydev->speed, phydev->duplex) to find a valid entry in the settings array for the given speed and duplex value. For full duplex 1000baseT, this will return the first matching entry, which is the entry for 1000baseKX_Full. If the phy eee does not support 1000baseKX_Full, this entry will not match, causing phy_init_eee to fail for no good reason. Fixes: 9a9c56cb34e6 ("net: phy: fix a bug when verify the EEE support") Fixes: 3e7077067e80c ("phy: Expand phy speed/duplex settings array") Cc: Giuseppe Cavallaro <peppe.cavallaro@st.com> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Acked-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-02-20ipv4: ip_check_defrag should correctly check return value of skb_copy_bitsAlexander Drozdov1-1/+1
skb_copy_bits() returns zero on success and negative value on error, so it is needed to invert the condition in ip_check_defrag(). Fixes: 1bf3751ec90c ("ipv4: ip_check_defrag must not modify skb before unsharing") Signed-off-by: Alexander Drozdov <al.drozdov@gmail.com> Acked-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-02-20usb: plusb: Add support for National Instruments host-to-host cableBen Shelton1-0/+5
The National Instruments USB Host-to-Host Cable is based on the Prolific PL-25A1 chipset. Add its VID/PID so the plusb driver will recognize it. Signed-off-by: Ben Shelton <ben.shelton@ni.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-02-19ehea: Register memory hotplug, reboot and crash hooks on adapter probeAnton Blanchard1-105/+141
ehea creates memory hotplug, reboot and crash hooks even if there are no adapters in the box. Just create them when we probe our first adapter. [cascardo: use ehea_register_memory_hooks return code] Signed-off-by: Anton Blanchard <anton@samba.org> Tested-by: Thadeu Lima de Souza Cascardo <cascardo@linux.vnet.ibm.com> Signed-off-by: Thadeu Lima de Souza Cascardo <cascardo@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-02-19gen_stats.c: Duplicate xstats buffer for later useIgnacy Gawędzki1-1/+14
The gnet_stats_copy_app() function gets called, more often than not, with its second argument a pointer to an automatic variable in the caller's stack. Therefore, to avoid copying garbage afterwards when calling gnet_stats_finish_copy(), this data is better copied to a dynamically allocated memory that gets freed after use. [xiyou.wangcong@gmail.com: remove a useless kfree()] Signed-off-by: Ignacy Gawędzki <ignacy.gawedzki@green-communications.fr> Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-02-18Merge tag 'mfd-for-linus-3.20' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfdLinus Torvalds44-109/+3229
Pull MFD updates from Lee Jones: "Changes to existing drivers: - fixr platform device collision; da9052, wm8994-core - regmap configuration amendments; tps65218 - fix runtime PM deadlock; rtsx_usb - remove unused/superfluous code; db8500-prcmu, omap-usb-host - enable watchdog timer; lpc_sch - add start/stop RX URBs helpers; dln2 - remove platform device (DT only); max77686, max77802 - support suspend and resume; dln2 - add Device Tree support; da9063 - extra error checking; intel_soc_pmic - const'ify all the things; 88pm860x, hi6421-pmic, intel_soc_pmic, max77686, lm3533, retu, pcf50633, davinci_voicecodec, smsc-ece1099, tps65218, mc13xxx, tps65217, twl-core, twl6040 New drivers/supported devices: - new driver for Richtek RT5033 - new driver for DA9150 Charger and FuelGauge - new driver for Qualcomm Resource Power Manager (RPM) - add support for the ir-clk into sun6i-prcm - add support for FuelGauge into axp20x" * tag 'mfd-for-linus-3.20' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd: (32 commits) mfd: intel_soc_pmic: Add missing error check for devm_kzalloc mfd: rtsx_usb: Defer autosuspend while card exists mfd: devicetree: Add bindings for DA9063 mfd: da9063: Add device tree support regulator: qcom-rpm: Add missing state flag in call to RPM mfd: qcom-rpm: Driver for the Qualcomm RPM mfd: devicetree: bindings: Add Qualcomm RPM DT binding mfd: max77686/802: Remove support for board files mfd: omap-usb-host: Remove some unused functions mfd: twl6040: Constify struct regmap_config and reg_default array mfd: twl-core: Constify struct regmap_config and reg_default array mfd: tps65217: Constify struct regmap_config mfd: mc13xxx: i2c/spi: Constify struct regmap_config mfd: tps65218: Constify struct regmap_config mfd: smsc-ece1099: Constify struct regmap_config mfd: davinci_voicecodec: Constify struct regmap_config mfd: pcf50633: Constify struct regmap_config mfd: retu: Constify struct regmap_config mfd: lm3533: Constify struct regmap_config mfd: max77686: Constify struct regmap_config ...
2015-02-18Merge tag 'pwm/for-3.20-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/thierry.reding/linux-pwmLinus Torvalds10-21/+704
Pull pwm updates from Thierry Reding: "This contains two new drivers, one for Allwinner SoCs and the other for Imagination Technologies' Pistachio SoC. Complementing this are a couple of fixes to the Atmel HLCDC PWM and STi PWM drivers as well as minor cleanups to the core and the Tegra driver" * tag 'pwm/for-3.20-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/thierry.reding/linux-pwm: pwm: tegra: Use NSEC_PER_SEC pwm: Remove unnecessary check before of_node_put() pwm: Add device tree binding document for IMG PWM DAC pwm: Imagination Technologies PWM DAC driver pwm: sti: Maintain a bitmap of configured devices pwm: sunxi: document OF bindings pwm: Add Allwinner SoC support pwm: atmel-hlcdc: Prevent division by zero pwm: atmel-hlcdc: Depend on HAVE_CLK
2015-02-18Merge branch 'for-linus' of git://git.infradead.org/users/vkoul/slave-dmaLinus Torvalds71-1911/+4736
Pull dmaengine updates from Vinod Koul: "This update brings: - the big cleanup up by Maxime for device control and slave capabilities. This makes the API much cleaner. - new IMG MDC driver by Andrew - new Renesas R-Car Gen2 DMA Controller driver by Laurent along with bunch of fixes on rcar drivers - odd fixes and updates spread over driver" * 'for-linus' of git://git.infradead.org/users/vkoul/slave-dma: (130 commits) dmaengine: pl330: add DMA_PAUSE feature dmaengine: pl330: improve pl330_tx_status() function dmaengine: rcar-dmac: Disable channel 0 when using IOMMU dmaengine: rcar-dmac: Work around descriptor mode IOMMU errata dmaengine: rcar-dmac: Allocate hardware descriptors with DMAC device dmaengine: rcar-dmac: Fix oops due to unintialized list in error ISR dmaengine: rcar-dmac: Fix spinlock issues in interrupt dmaenegine: edma: fix sparse warnings dmaengine: rcar-dmac: Fix uninitialized variable usage dmaengine: shdmac: extend PM methods dmaengine: shdmac: use SET_RUNTIME_PM_OPS() dmaengine: pl330: fix bug that cause start the same descs in cyclic dmaengine: at_xdmac: allow muliple dwidths when doing slave transfers dmaengine: at_xdmac: simplify channel configuration stuff dmaengine: at_xdmac: introduce save_cc field dmaengine: at_xdmac: wait for in-progress transaction to complete after pausing a channel ioat: fail self-test if wait_for_completion times out dmaengine: dw: define DW_DMA_MAX_NR_MASTERS dmaengine: dw: amend description of dma_dev field dmatest: move src_off, dst_off, len inside loop ...
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.